Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "Lee, C. H." wg kryterium: Autor

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 42
Tytuł:
Photoluminescence Studies of Aluminum Nitride Nanowires
Autorzy:
Yang, J.
Na, H.
Kim, H.
Kebede, M.
Choi, R.
Jeong, J.
Lee, C.
Powiązania:
https://bibliotekanauki.pl/articles/1505466.pdf
Data publikacji:
2011-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
We report the production of AlN nanowires by the thermal heating method, for exploring their photoluminescence properties. The room-temperature photoluminescence properties were investigated with different annealing environment. While broad emissions with peaks at around 2.45 and 2.95 eV were obtained from both unannealed and annealed samples, the additional 2.1 eV peak was found from the annealed samples. We have suggested the possible emission mechanisms based on the assumption that both 2.45 eV peak and 2.1 eV peak are ascribed to the nitrogen vacancies. Annealing in N_2 environment exhibited lower intensities of 2.45 eV peak and 2.1 eV peak in comparison to those in Ar environment, presumably due to the suppression of nitrogen vacancies.
Źródło:
Acta Physica Polonica A; 2011, 119, 2; 125-127
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element analysis of three-point bending of a T-beam structural biaxial highly oriented polymer material
Analiza metodą elementów skończonych zginania trójpunktowego belki teowej wykonanej z wysoko zorientowanego dwuosiowo materiału polimerowego
Autorzy:
Wei, C.-L.
Chang, Y.
Lee, Y.-C.
Lee, R.
Luo, T.-W.
Chen, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/946988.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
solid phase processing
highly oriented polymer (HOP)
orthotropic materials
T-beam
three-point bending
finite element
proces w fazie stałej
wysoko zorientowany polimer
materiały ortotropowe
belka teowa
zginanie trójpunktowe
elementy skończone
Opis:
Polymers with biaxial aligned molecular chains are also orthotropic materials, which are characterized by high tensile strength and low shear strength in the length direction. When orthotropic materials are used as structural shapes with poor shear strength, they are likely to undergo premature failure under shear stress. Therefore, in three-point bending, the cross-section of the entire profile not only bears tensile stress and compressive stress in the length direction, but also simultaneously exhibits shear stress. This study analyzes the distribution of tensile stress, compressive stress and shear stress in the length direction of highly oriented polymers (HOP) by finite element analysis to find the most suitable length-to-height ratio for these materials when used as structural shapes. The finite element analysis software, Abaqus, is utilized to simulate HOP T-beam to analyze the load stress of a T-beam. With a fixed cross–section area, as the length of the material changes, its shear strength also changes. Accordingly, the order of occurrence of tensile failure and shear failure can be investigated. The simulation reveals that when the length-to-height ratio is between 4 : 1 and 20 : 1, a zone of stress in which tensile failure and shear failure occur can be found. This result can be exploited in the design and development of structural beam.
Polimery o dwuosiowo zorientowanych łańcuchach makrocząsteczek są materiałami ortotropowymi, wykazującymi dużą wytrzymałość na rozciąganie oraz niewielką wytrzymałość na ścinanie w kierunku długości. Elementy konstrukcyjne wytworzone z materiału ortotropowego o małej wytrzymałości na ścinanie są podatne na przedwczesne uszkodzenie pod wpływem naprężeń ścinających. Przy zginaniu trójpunktowym w przekroju ich profilu występują zarówno naprężenia rozciągające i ściskające w kierunku podłużnym, jak i naprężenia ścinające. Metodą elementów skończonych analizowano rozkład naprężeń rozciągających, ściskających i ścinających w kierunku podłużnym wysoko zorientowanych polimerów (HOP) w celu określenia optymalnego stosunku długości do wysokości w kształtach konstrukcyjnych. Do symulacji naprężeń obciążeniowych w zginaniu trójpunktowym belki teowej wykorzystano program komputerowy Abaqus. Stwierdzono, że przy stałej powierzchni przekroju poprzecznego belki jej wytrzymałość na ścinanie zmienia się wraz ze zmianą długości. Badano również kolejność występowania uszkodzeń pod wpływem działania sił rozciągających i ścinających. Symulacja wykazała, że przy stosunku długości do wysokości w zakresie od 4 : 1 do 20 : 1 występuje strefa naprężeń, w której mogą się pojawiać uszkodzenia w wyniku rozciągania lub ścinania. Uzyskane wyniki można wykorzystać w projektowaniu i optymalizacji belek konstrukcyjnych.
Źródło:
Polimery; 2018, 63, 3; 219-223
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Argon Plasma in a New Process for Improving the Physical and Anti-bacterial Properties of Crosslinked Cotton Cellulose with Dimethyloldihydroxyethyleneurea-Maleic Acid
Zastosowanie plazmy niskotemperaturowej w środowisku argonu w procesie obróbki tkanin bawełnianych sieciowanych za pomocą kwasu dimetylodihydroxyetylenourylomaleinowego dla polepszenia właściwosci fizycznych oraz antybakteryjnych
Autorzy:
Tsou, C H
Suen, M C
Tsou, C Y
Chen, J C
Yeh, J T
Lin, S M
Lai, Y C
Hwang, J Z
Huang, S H
Hung, W S
Hu, C C
Lee, K R
Lai, J Y
Powiązania:
https://bibliotekanauki.pl/articles/232331.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
cotton
plasma
antibacterial
crosslinking
crosslink length
crosslinks number per anhydroglucose
surface distribution
odour absorption
bawełna
plazma
właściwości antybakteryjne
sieciowanie tkanin bawełnianych
kwas dimetylodihydroxyetylenourylomaleinowy
odporności na zagniecenia
pochłanianie zapachów
żywica termoutwardzalna
Opis:
This study reports the findings of an argon (Ar) plasma treatment added to the traditional pad-dry-cure process between dry and cure treatments. This new process is called the "paddry-plasma-cure process". The crosslinking agent was a mixture of dimethyloldihydroxyethyleneurea (DMDHEU) and maleic acid (MA). Results show that Ar plasma treatment can increase the bonded crosslinking agent (i.e., the nitrogen content). The dry crease recovery angle (DCRA), wet crease recovery angle (WCRA), and tensile strength retention (TSR) of the pad-dry-plasma-cure finished fabrics were higher than those of traditional pad-dry-cure finished fabrics at a given nitrogen content. Additionally it was found that the number of crosslinks per anhydroglucose unit (CL/AGU) and the length of crosslinks of pad-dry-plasma-cure-finished fabrics were higher than that of traditional pad-dry-cure finished fabrics at the same resin concentration in the pad bath. DCRA, WCRA and TSR values of pad-dry-plasma-cure-finished fabrics were higher than those of pad-dry-curefinished fabrics at the same CL/AGU value. However, activation energies for the pad-dryplasma-cure process were higher than those for the pad-dry-cure process. The anti-bacterial ability and odour absorption of the pad-dry-plasma-cure and pad-dry-plasma-cure finished fabrics were higher than those for the pad-dry-cure finished fabrics. The surface distribution of crosslinking agents for the pad-dry-plasma-cure process was higher than that of the pad-dry-cure process. Thus the pad-dry-plasma-cure process is excellent for improving the physical properties, bacterial inhibition, and odour absorption of finished cotton fabrics and for decreasing their formaldehyde release.
Artykułu odnosi się do problematyki możliwości i celowości wprowadzenia modyfikacji plazmowej w warunkach niskociśnieniowych i w środowisku argonu do konwencjonalnego procesu wykończenia przeciw mnącego z zastosowaniem reaktywnych żywic termoutwardzalnych. Badano kąt odprężenia na sucho i na mokro, i stwierdzono polepszenie właściwości odporności na zagniecenia w wyniku dodatkowego zastosowania plazmy. Badano również właściwości antybakteryjne i pochłanianie zapachów, które okazały się korzystniejsze dla dodatkowej obróbki plazmowej. W wyniku zmodyfikowanej obróbki uzyskano mniejsze wydzielanie formaldehydu z gotowej tkaniny.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 1 (109); 49-56
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Supercontinuum fiber laser source for water quality and heavy metals detection
Autorzy:
Teh, P. C.
Ho, Y. H.
Ong, C. E.
Lee, S. C.
Lo, P. K.
Lai, K. C.
Yeap, K. H.
Loh, S. H.
Teh, P. S.
Tey, K. L.
Powiązania:
https://bibliotekanauki.pl/articles/174135.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
supercontinuum generation
master oscillator power amplifier
nonlinear optics
transmittance measurement
heavy metal contaminants
Opis:
We report a compact, all fiber, 150 ps fiber master oscillator power amplifier operating at 1064 nm that has the ability of producing a maximum average output power of 2.16 W with peak power as high as 10 kW. The output from the master oscillator power amplifier is spliced with a highly nonlinear photonic crystal fiber, generating a supercontinuum with an average power of 250 mW at repetition rate of 1 MHz and spectrum bandwidth spanning from 600 to 1700 nm. The developed supercontinuum system is used to detect the presence of heavy metal contaminants in water by a simple light transmittance method to ensure that the water is free from heavy metal contaminants and safe for consumption. The supercontinuum laser source was shone onto a water sample with a detector placed at another end in order to measure the transmitted supercontinuum light. By measuring the amount of light attenuated at particular wavelength, the concentration of heavy metal contaminants present in the water sample could be determined.
Źródło:
Optica Applicata; 2017, 47, 3; 445-456
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhancement of Life Time of the Dimensionally Stable Anode for Copper Electroplating Applications
Autorzy:
Son, S. H.
Park, S. C.
Lee, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/356684.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dimensionally stable anode
surface treatment
life time
copper
electrodeposition
Opis:
In order to enhance the long-term stability of DSA for copper electroplating process, in the present study, noble metal oxides with excellent electrochemical properties was used and optimum condition was determined the ratio of noble metal oxides, surface pre-treatment of titanium substrate and heat treatment. The effect of the surface pretreatment of titanium substrate and ratio of noble metal oxides were estimated by accelerated test at the highly current density conditions. The lifetime of DSA increase six-fold higher as the oxide thickness of Ta 7 : Ir 3 composition ratio. Under the optimal condition, surface pretreatment led to dramatic increase in the lifetime of DSA.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1019-1022
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study On The Electro-Refining Of Tin In Acid Solution From Electronic Waste
Badanie elektrorafinacji cyny w roztworze kwasu z e-odpadów
Autorzy:
Son, S. H.
Park, S. C.
Kim, J. H.
Kim, Y. H.
Lee, M. S.
Ahn, J.-W.
Powiązania:
https://bibliotekanauki.pl/articles/352665.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrorefining
tin
electronic waste
recycling
high purity
elektrorafinacja
cyna
odpady elektroniczne
recykling
Opis:
The tin metal could be retractable from wasted tin scrap, sludge, and wasted electroplated solution hydrometallurgical treatment, and purification process. In order to be used as resource of electronic devices, the retracted crude metal should be purified to the extent of higher than 99.9%. In this study, tin electro-refining process was performed to purify the casted tin crude metal at various experimental conditions: at the current density of 3, 5A/dm2, and in various electrolytes such as hydrochloric acid, sulfuric acid and methansulfonic acid. Additional experiment was conducted using Rotating Disk Electrode (RDE) in order to investigate the rate determining step of tin electro-refining process. The current efficiency, 65.6%, was achievable at the condition of current density, 5A/dm2, and in the electrolyte of Hydrochloric acid. During tin electro-refining process, impurity dissolved from tin crude metal into the electrolyte was analyzed using Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES), and the result showed the concentration of impurity metal gradually increased. Quantitative analysis on casted tin crude metal showed that it consists of tin with 93.9 wt.% and several impurity metals of Ag, Bi, Pb, Cu, and etc. After tin electro-refining process, the purity of tin increased up to 99.985 wt.%.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1217-1220
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morphology Change Of Si Deposit In Molten Salt Electrorefining
Zmiana morfologii osadu Si podczas elektrorafinacji w stopionych solach
Autorzy:
Ryu, H. Y.
Kwon, S. C.
Han, M. H.
An, Y. S.
Lee, J. S.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/354346.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
molten salt
silicon
morphology
electrorefining
current density
sól stopiona
krzem
morfologia
elektrorafinacja
gęstość prądu
Opis:
The effects of processing parameters on the morphology change in a Si deposit recovered by means of molten salt electrorefining are evaluated using electrochemical techniques such as cyclic voltammetry and chronopotentiometry at 800°C. It was found that concentration of K2SiF6 and current density were important parameters in determining deposit size. Higher concentrations of K2SiF6 were effective in coarsening the silicon deposit and decreasing the cell potential. Silicon nanofiber was recovered at 5 wt% of K2SiF6 whereas dense particles were prepared at 30 and 50 wt% of K2SiF6. The morphology of the Si deposit was determined by the concentration of Si in the electrolyte which is related to the formation of crystal and growth of Si. The formation mechanism of the Si deposit was interpreted by using high resolution TEM as well as electrochemical properties.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1491-1497
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantitative Analysis of Cryomilled Nanocrystalline Ti-6Al-4V Alloy Powder by X-Ray Diffraction
Autorzy:
Oh, M.
Yu, H. K.
Lee, J.-H.
Oh, M. C.
Jung, S.-H.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/356265.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanocrystalline
cryomilling
Ti alloy
X-ray diffraction
size-strain plot method
Opis:
A nanocrystalline Ti alloy powder was fabricated using cryomilling. The grain size and lattice strain evolution during cryomilling were quantitatively analyzed using X-ray diffraction (XRD) based on the Scherrer equation, Williamson-Hall (W-H) plotting method, and size-strain (S-S) method assuming uniform deformation. Other physical parameters including stress and strain have been calculated. The average crystallite size and the lattice strain evaluated from XRD analysis are in good agreement with the result of transmission electron microscopy (TEM).
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1439-1442
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization Of The Graded Microstructure In Powder Sintered Porous Titanium
Charakterystyka gradientowej mikrostruktury porowatego tytanu spiekanego z proszku
Autorzy:
Oak, J.-J.
Bang, J. I.
Bae, K.-C.
Kim, Y. H.
Lee, Y. C.
Chun, H. H.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/356239.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
powder metallurgy
porous structure
sintering
biomaterial
tytan
metalurgia proszków
struktura porowata
spiekanie
biomateriał
Opis:
The proposed sintering process produce porosity and functional graded microstructure in the sinterd titanium powders. Titanium powders with different micro sizes were sintered at the proposed temperature region at 1200 and 1300°C for 2h. The apatite-forming on the graded microstructure is observed by immersion test in Hanks balanced salt soluion at 37°C. Sintering condition of titanium powders is estimated by thermogravitmetry-differential thermal analysis (TG-DTA). The synthersied surface structures and apatite-forming ability were characterized by a field emission scanning electron microscopy (FE-SEM) observation and energy dispersive X-ray spectroscopy (EDS) analysis. As results, these graded microstructure of sintered porous titanium powders reveals apatite-forming ability as osseointegration by calcification in Hanks balanced salt soluion(HBSS) at 37°C.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1265-1269
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural Properties and Mechanical Behavior of the 2 Step-Reinforced Al-Si/SiCp Metal Matrix Composite by Titanium-Fiber
Autorzy:
Oak, J.-J.
Lee, Y. C.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/356010.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metal matrix composite
sintering
Ti fiber
mechanical properties
diffusion
Opis:
In this study, the newly designed Al-9Si/SiC particles (SiCp) + Ti-fiber (2step-reinforced Al-9Si alloy matrix) metal matrix composites (MMCs) were fabricated by hot-pressing sintering at 560°C. 2step-reinforced Al-based MMCs were characterized by thermal shrinkage, phase transition, microstructure and tensile strength. The addition of Ti-fiber reduced thermal shrinkage was caused by temperature difference in sintering process as well as enhanced assistance for tensile strength and plastic deformation at room temperature. Experimental results reveal that the 2step-reinforcment sintering by ceramic and metal has a significant effect to increase interface bonding in boundary of each component material and the improved mechanical properties were due to the influence of interfacial product by diffusion. Tensile strength and elongation at room temperature by 2step-reinforcement were improved in 19.5% and 26.2% more than those of Al-9Si/SiCp, respectively. Especially, it reveals that diffusion direction may be varied by sintering methods at low temperature in this study.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1089-1097
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Recommended Integrated Mechanism to Enhance OSH Management of Blue-Collar Foreign Workers in Taiwan
Autorzy:
Liao, H. C.
Cheng, S. F.
Wang, Y.
Lee, L. H.
Powiązania:
https://bibliotekanauki.pl/articles/90376.pdf
Data publikacji:
2014
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
occupational safety and health
Labor Safety and Health Act
OSH training program
manpower agency
blue-collar foreign worker
bezpieczeństwo i higiena pracy
zdrowie
szkolenie BHP
Opis:
This study examines the roles and functions of businesses, labor-exporting countries’ representative offices in Taiwan, religious organizations, and manpower agencies in promoting occupational safety and health (OSH). It also offers advice to Taiwanese authorities on making policies and improvements regarding the oversight mechanism mandated by the Labor Safety and Health Act, giving them an idea of what to focus on when enforcing control over blue-collar foreign workers’ OSH conditions. This study also proposes that Taiwanese authorities may serve not only as an overseer/inspector of those hiring blue-collar foreign workers in Taiwan, but also expand their role to lay down policies regarding a variety of OSH teaching materials in the blue-collar foreign workers’ native languages (spoken or written), the qualifications of translators in blue-collar foreign workers’ OSH training programs, and regulations concerning the longer hours such training programs take.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2014, 20, 4; 537-549
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-parametric machine learning methods for evaluating the effects of traffic accident duration on freeways
Autorzy:
Lee, Y.
Wei, C.-H.
Chao, K.-C.
Powiązania:
https://bibliotekanauki.pl/articles/223569.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
accident on freeway
accident duration
effect evaluating
correlation
artificial neural networks
k-nearest neighbour method
wypadek na autostradzie
czas trwania wypadku
ocena skutków
korelacja
sztuczne sieci neuronowe
metoda najbliższego sąsiada
Opis:
Traffic accidents usually cause congestion and increase travel-times. The cost of extra travel time and fuel consumption due to congestion is huge. Traffic operators and drivers expect an accurately forecasted accident duration to reduce uncertainty and to enable the implementation of appropriate strategies. This study demonstrates two non-parametric machine learning methods, namely the k-nearest neighbour method and artificial neural network method, to construct accident duration prediction models. The factors influencing the occurrence of accidents are numerous and complex. To capture this phenomenon and improve the performance of accident duration prediction, the models incorporated various data including accident characteristics, traffic data, illumination, weather conditions, and road geometry characteristics. All raw data are collected from two public agencies and were integrated and cross-checked. Before model development, a correlation analysis was performed to reduce the scale of interrelated features or variables. Based on the performance comparison results, an artificial neural network model can provide good and reasonable prediction for accident duration with mean absolute percentage error values less than 30%, which are better than the prediction results of a k-nearest neighbour model. Based on comparison results for circumstances, the Model which incorporated significant variables and employed the ANN method can provide a more accurate prediction of accident duration when the circumstances involved the day time or drunk driving than those that involved night time and did not involve drunk driving. Empirical evaluation results reveal that significant variables possess a major influence on accident duration prediction.
Źródło:
Archives of Transport; 2017, 43, 3; 91-104
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Heat-Treatment On Microstructure And Magnetic Properties Of Nanocrystallized Mn-Zn Ferrite Powders
Wpływ obróbki cieplnej na mikrostrukturę i właściwości magnetyczne nanokrystalicznych proszków ferrytu Mn-Zn
Autorzy:
Lee, W. H.
Hong, C. S.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/351552.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high energy ball milling
nanosized particles
crystallite size
magnetic properties
frezowanie kulowe
nanocząstki
wielkości krystalitów
właściwości magnetyczne
Opis:
The initial ferrite powders were subjected to high energy ball milling at 300rpm for 3h, and subsequently heat-treated at 573-1273K for 1h. Based on the observation of microstructure and measurement of magnetic properties, the heat-treatment effect was investigated. The size of initial powders was approximately 70μm. After milling, the powders with approximately 230nm in size were obtained, which were composed of the nano-sized particles of approximately 15nm in size. The milled powders became larger to approximately 550nm after heat-treatment at 973K. In addition, the size of particles increased to approximately 120nm with increasing temperature up to 973K. The coercivity of initial powders was almost unchanged after milling, whereas the saturation magnetization increased. As the heat-treatment temperature increased, the saturation magnetization gradually increased and the maximum coercivity was obtained at 773K.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1347-1350
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-Consolidation Mechanism Of Porous Ti-6Al-4V Implant Prototypes Produced By Electro-Discharge-Sintering Of Spherical Ti-6Al-4V Powders
Mechanizm autokonsolidacji prototypów porowatych implantów wytworzonych przez spiekanie sferycznych proszków Ti-6Al-4V
Autorzy:
Lee, W. H.
Jo, Y. J.
Kim, Y. H.
Jo, Y. H.
Seong, J. G.
Van Tyne, C. J.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/356277.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti-6Al-4V
implant
porous
sintering
electrodischarge
porowatość
spiekanie
proszki spiekane
Opis:
Electro-Discharge-Sintering (EDS) was employed to fabricate Ti-6Al-4V porous implant prototypes from atomized powders (100 – 150 μm), that were subjected to discharges of 0.75 to 2.0 kJ/0.7g-powder from 150, 300, and 450 μF capacitors. Both fully porous and porous-surfaced Ti-6Al-4V compacts with various solid core sizes were self-consolidated in less than 86 – 155 μsec. It is known that EDS can simultaneously produce the pinch pressure to squeeze and deform powder particles and the heat to weld them together. The formation of a solid core in these prototypes depends on the amounts of both the pinch pressure and heat generated during a discharge. The size of the solid core and the thickness of the porous layer can be successfully controlled by manipulating the discharge conditions such as input energy and capacitance.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1185-1189
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Empirical Investigation of the Influence of Safety Climate on Organizational Citizenship Behavior in Taiwan’s Facilities
Autorzy:
Lee, T. Z.
Wu, C. H.
Hong, C. W.
Powiązania:
https://bibliotekanauki.pl/articles/91216.pdf
Data publikacji:
2007
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
safety climate
organizational citizenship behavior
social exchange relationship
psychological effect
Opis:
Although the social exchange relationships between employers and employees are increasingly important to the performance of safety management systems, the psychological effects of work attitudes on this relationship have been less studied. Using a sample of first-line operators and their supervisors from 188 facilities in Taiwan which had Occupational Health and Safety Assessment Series 18000 (OHSAS 18000) certification, the current research conducted an empirical investigation of the influence of safety climate on organizational citizenship behavior (OCB). Work attitude was used to disclose the psychological effect. Research results indicated that (a) safety climate was a significant predicator of OCB, (b) the psychological effect significantly influenced social exchange relationships, and (c) job satisfaction showed a stronger mediating influence than organizational commitment due to the frequent top management turnover. Discussions and implications are also addressed.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2007, 13, 3; 255--269
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 42

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies