Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Lee, B. H." wg kryterium: Autor


Tytuł:
Performance analysis of doppler aided GPS/QZSS precise positioning for land vehicles
Autorzy:
Lee, B. H.
Jee, G. I.
Powiązania:
https://bibliotekanauki.pl/articles/320665.pdf
Data publikacji:
2013
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
QZSS
land navigation
intelligent transport systems
Opis:
For ITS (Intelligent Transport Systems), especially for land vehicles, precise position is the prime information. GNSS is the most popular navigation system. Generally, ITS demands lane distinguishable positioning accuracy. However urban area is most environments of land vehicles and the signal blocks of satellite with low elevation angle, multipath error and etc. make unreliable positioning results. Especially, lack of number of visible satellites (fewer than 4 satellites) cannot provide positioning results. QZSS (Quasi-Zenith Satellite System) which operated by Japan has high interoperability. In addition, its elevation angle is very high in long time in Korea. It means QZSS signal can be received in urban area and it can be great advantage for land vehicles. The most positioning errors are occurred by multipath, cycle slip, and etc. For example, multipath error is unexpected momentary error. In order to reduce position error, smoothing technique in position domain is needed. In this paper, precise positioning for land vehicles was evaluated. First, by using QZSS, probability of navigation solution was enhanced. Second, the reliability is improved by smoothing positioning result using Doppler measurement. The analysis was performed by trajectory analysis using precise map data.
Dla inteligentnych systemów transportowych, zwłaszcza w odniesieniu do pojazdów lądowych, dokładna informacja o pozycji jest pierwszorzędna. Systemy satelitarne (GNSS) to obecnie najbardziej popularne systemy nawigacyjne. Zasadniczo inteligentne systemy transportowe wymagają znajomości pozycji determinowanej warunkami drogowymi, a obszary miejskie stanowią środowisko, w którym porusza się największa liczba pojazdów lądowych. Takie ograniczenia, jak przesłanianie niskich satelitów, błąd wielodrożności i tym podobne powodują, że pozycje wyznaczane metodami satelitarnymi stają się mało wiarygodne. Brak wyznaczeń może być spowodowany zwłaszcza brakiem dostatecznej liczby widocznych satelitów (mniej niż cztery). QZSS (Quasi-Zenitalny System Satelitarny), uruchomiony w Japonii, cechuje się w tym względzie niezwykle korzystnymi cechami. W dodatku jego wysokość topocentryczna przez długi czas jest bardzo duża dla obserwatora znajdującego się w Korei. Oznacza to, że sygnał tego systemu może być odbierany w obszarze miejskim, co stanowi bardzo korzystną cechę dla pojazdów lądowych. Większość błędów pozycji wynika w tym wypadku z błędu wielodrogowości, przeskoków fazy i tym podobnych. Na przykład, wielodrogowość obrazuje się jako chwilowe, niespodziewane odchylenie pozycji. Dla zmniejszenia tego rodzaju błędów niezbędna jest technika wygładzania pozycji. W artykule ocenie poddano dokładność pozycjonowania pojazdów lądowych. Po pierwsze poprzez zastosowanie QZSS poprawiono prawdopodobieństwo poprawnego rozwiązania, po drugie poprzez zastosowanie technik wygładzania z użyciem pomiarów dopplerowskich poprawiono wiarygodność wyznaczeń. Analizy wyników dokonano przez analizę trajektorii, odnosząc ją do dokładnych danych mapy.
Źródło:
Annual of Navigation; 2013, 20; 85-96
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Atomistic Analysis Of Radiation-Induced Segregation In Ion-Irradiated Stainless Steel 316
Analiza w skali atomowej indukowanej promieniowaniem segregacji w stali nierdzewnej 316
Autorzy:
Lee, G.-G.
Jin, H.-H.
Chang, K.
Lee, B. H.
Kwon, J.
Powiązania:
https://bibliotekanauki.pl/articles/354713.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
atom probe tomography (APT)
radiation-induced segregation (RIS)
ion irradiation
irradiation defects
stainless steel
APT
RIS
stal nierdzewna
segregacja
Opis:
Stainless steel (SS) is a well-known material for the internal parts of nuclear power plants. It is known that these alloys exhibit radiation-induced segregation (RIS) at point defect sinks at moderate temperature, while in service. The RIS behavior of SS can be a potential problem by increasing the susceptibility to irradiation-assisted stress corrosion cracking. In this work, the RIS behavior of solute atoms at sinks in SS 316 irradiated with Fe4+ ions were characterized by atom probe tomography (APT). There were torus-shaped defects along with a depletion of Cr and enrichment of Ni and Si. These clusters are believed to be dislocation loops resulting from irradiation. The segregation of solutes was also observed for various defect shapes. These observations are consistent with other APT results from the literature. The composition of the clusters was analyzed quantitatively almost at the atomic scale. Despite the limitations of the experiments, the APT analysis was well suited for discovering the structure of irradiation defects and performing a quantitative analysis of RIS in irradiated specimens.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1179-1184
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Compaction Pressure And Sintering Temperature On The Liquid Phase Sintering Behavior Of Al-Cu-Zn Alloy
Wpływ ciśnienia prasowania i temperatury spiekania na spiekanie stopu Al-Cu-Zn z udziałem fazy ciekłej
Autorzy:
Lee, S. H.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/351836.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder metallurgy
liquid phase sintering
compaction pressure
Al-Cu-Zn alloy
metalurgia proszków
spiekanie w fazie ciekłej
ciśnienie prasowania
stop Al-Cu-Zn
Opis:
The liquid phase sintering characteristics of Al-Cu-Zn alloy were investigated with respect to various powder metallurgy processing conditions. Powders of each alloying elements were blended to form Al-6Cu-5Zn composition and compacted with pressures of 200, 400, and 600 MPa. The sintering process was performed at various temperatures of 410, 560, and 615°C in N2 gas atmosphere. Density and micro-Vickers hardness measurements were conducted at different processing stages, and transverse rupture strength of sintered materials was examined for each condition, respectively. The microstructure was characterized using optical microscope and scanning electron microscopy. The effect of Zn addition on the liquid phase sintering behavior during P/M process of the Al-Cu-Zn alloy was also discussed in detail.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1485-1489
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Submicroscale Ag-Coated Cu Particles by Multi-Step Addition of Ag Plating Solution and Antioxidation Properties for Different Ag Shell Thicknesses
Autorzy:
Choi, E. B.
Lee, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/351202.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ag-coated Cu particle
submicrometer
Glycol-based Ag plating solution
mult-step addition
antioxidation
Opis:
For application as a low-cost conductive filler material, submicroscale Cu@Ag particles were fabricated at room temperature without any reductants by a multi-step addition method using an ethylene glycol-based Ag plating solution. Scanning electron microscopy images of the Ag-coated Cu particles demonstrated the formation of discrete Ag particles less than 100 nm in size as well as a thin Ag coating on Cu particles, during the early addition steps. However, as the thickness of the Ag coating increased, the small Ag particles agglomerated into Ag coatings with an increase in the number of Ag plating steps. Owing to the absence of additives such as surfactants, a comparison between the microstructural images and calculations indicated increased agglomeration between fabricated Ag-coated Cu particles with an increase in the number of Ag plating steps. However, thermogravimetric-differential scanning calorimetry of the agglomerated Ag-coated Cu particles after the fifth addition of the Ag plating solution demonstrated their antioxidation behavior even after 70 min in air at 150°C.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1137-1142
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics Of The Porous Body Sintered By Nano-Sized Fe-Cr-Al Alloy Powder
Charakterystyka porowatego korpusu spiekanego z nanometrycznego proszku stopu Fe-Cr-Al
Autorzy:
Lee, S.-I.
Lee, S.-H.
Gu, B.-U.
Lee, D.-W.
Kim, B.-K.
Powiązania:
https://bibliotekanauki.pl/articles/356635.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Fe-Cr-Al powder
metallic sponges
sintering temperature
oxidation resistance
proszek Fe-Cr-Al
proszek nanometryczny
temperatura spiekania
odporność na utlenianie
Opis:
Porous metal with uniform honeycomb structure was successfully produced by sintering using Fe-Cr-Al nano powder, which was prepared by the pulsed wire evaporation (PWE) in ethanol. Its process consisted of the several steps; 1) coating on the surface of polyurethane sponge with the liquid droplets generated from the ethanol-based slurry where the Fe-Cr-Al nano powders were uniformly dispersed, 2) heat treatment of debinding to remove the polyurethane sponge and 3) sintering of the porous green body formed by Fe-Cr-Al nano powders. The strut thickness of porous Fe-Cr-Al was increased by the increase of spraying times in ESP step. Also, The shrinkages and the oxidation resistance of the sintered porous body was increased with increase of sintering temperature. The optimal sintering temperature was shown to 1450°C in views to maximize the oxidation resistance and sinterability.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1275-1279
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Strut Thickness on Room and High Temperature Compressive Properties of Block-Type Ni-Cr-Al Powder Porous Metals
Autorzy:
Kang, B.-H.
Park, M.-H.
Lee, K.-A.
Powiązania:
https://bibliotekanauki.pl/articles/355591.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni-Cr-Al
powder porous metal
strut thickness
high temperature
compressive behavior
Opis:
This study investigated the effect of strut thickness on the room and high temperature compressive properties of block-type Ni-Cr-Al powder porous metals with ~3000 μm pore size manufactured using a new powder process. Two block-type Ni-Cr-Al porous metals with different strut thicknesses were manufactured. The strut thicknesses of two block foams were 340 μm (A) and 383 μm (B), respectively. Room temperature, 500°C, 650°C and 800°C compressive tests were performed. The compressive results identified typical elastic, plateau and densification regions of foam material in all temperature conditions. Regardless of the strut thickness, compressive strength (maximum peak stress) decreased as deformation temperature increased. In all deformation temperature ranges, the compressive strength measured higher in the porous metal with greater strut thickness (B). The high temperature deformation behavior of powder porous metal was confirmed to be affected by the structural factor and microstructural factor of the porous metal. With the findings described above, this study also discussed the high temperature deformation mechanism of the Ni-Cr-Al metal foam based on fracture surfaces after the high temperature compressions.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1329-1334
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of acute lipopolysaccharide-induced toxemia model on some neglected blood parameters
Autorzy:
Adam, G.O.
Lee, H.R.
Lee, S.J.
Kim, S.J.
Kim, G.B.
Kang, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/2087627.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Toxemia
lipopolysaccharide
base excess
pH
animal model
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 4; 665-671
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Surfactant Addition on Bi2Te3 Nanostructures Synthesized by Hydrothermal Method
Autorzy:
Dharmaiah, P.
Lee, C. H.
Madavali, B.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/351609.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bismuth telluride
hydrothermal synthesis
spark plasma sintering
thermoelectric materials
X-ray diffraction
Opis:
In the present work, we have prepared Bi2Te3 nanostructures with different morphologies such as nano-spherical, nanoplates and nanoflakes obtained using various surfactant additions (EG, PVP, and EDTA) by a hydrothermal method. The shape of the nanoparticles can be controlled by addition of surfactants. The samples were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). It is found that the minority BiOCl phase disappears after maintained pH at 10 with EG as surfactant. SEM bulk microstructure reveals that the sample consists of fine and coarse grains. Temperature dependence of thermoelectric properties of the nanostructured bulk sample was investigated in the range of 300-450K. The presence of nanograins in the bulk sample exhibits a reduction of thermal conductivity and less effect on electrical conductivity. As a result, a figure of merit of the sintered bulk sample reached 0.2 at 400 K. A maximum micro Vickers hardness of 102 Hv was obtained for the nanostructured sample, which was higher than the other reported results.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1005-1010
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Temperature Deformation Flow Of A ZK60A Magnesium Alloy After Extrusion
Płynięcie stopu magnezu ZK60A podczas wysokotemperaturowego odkształcenia w trakcie wytłaczania
Autorzy:
Kawasaki, M.
Lee, H. J.
Oh, M. C.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/354374.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
activation energy
extrusion
flow mechanics
magnesium alloy
tensile property
energia aktywacji
wytłaczanie
mechanika przepływu
stop magnezu
rozciąganie
Opis:
Flow behavior of a ZK60A magnesium alloy after continuous casting and subsequent extrusion was examined in tension at a range of strain rates of 3.0×10-6 − 1.0×10-2 s-1 at temperatures of 473-623K. The results demonstrated that the alloy exhibited a maximum elongation of ~250% at 523K when tested at an initial strain rate of 1.0×10-5 s-1 and strain rate sensitivity, m, of ~0.3-0.4 and the activation energy of ~94 kJ/mol were calculated under the testing conditions. The detailed investigation suggested that the high temperature flow of the ZK60A alloy having submicrometer grains demonstrates quasi-superplastic flow behavior controlled by a dislocation viscous glide process.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1327-1330
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of CoCrFeNiMn High Entropy Alloy Powder Processed by Gas Atomization
Autorzy:
Park, T. G.
Lee, S. H.
Lee, B.
Cho, H. M.
Choi, W. J.
Kim, B. S.
Shin, K. S.
Kim, T.-S.
Powiązania:
https://bibliotekanauki.pl/articles/353649.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high entropy alloy
gas atomization
spark plasma sintering
CoCrFeNiMn
Opis:
In this study, precisely controlled large scale gas atomization process was applied to produce spherical and uniform shaped high entropy alloy powder. The gas atomization process was carried out to fabricate CoCrFeNiMn alloy, which was studied for high ductility and mechanical properties at low temperatures. It was confirmed that the mass scale, single phase, equiatomic, and high purity spherical high entropy alloy powder was produced by gas atomization process. The powder was sintered by spark plasma sintering process with various sintering conditions, and mechanical properties were characterized. Through this research, we have developed a mass production process of high quality and spherical high entropy alloy powder, and it is expected to expand applications of this high entropy alloy into fields such as powder injection molding and 3D printing for complex shaped components.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1055-1059
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies