Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kowalski, M" wg kryterium: Autor


Tytuł:
Aerodynamic measurements micro air vehicle
Autorzy:
Zyluk, A.
Sibilski, K.
Kowalski, M.
Wiśniowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/243837.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
construction of micro air vehicles
aerodynamic measurements
Opis:
In present times, constructions of micro air vehicles arouse more and more interest researchers and manufacturers. Air turbulence is perceived as a major problem for Micro Air Vehicles (MAV) in outdoor applications. According to the literature, short duration vertical gusts may have velocity comparable to MAV airspeed, so brief periods of flight at very large angles of attack have to be considered. In these circumstances, it seems reasonable to apply the design with as high stall angle of attack as possible. In particular, the flow has to be attached to control surfaces to perform effective control in order to damp air turbulence effect. Therefore, an aircraft configuration was developed with cranked delta wing and propeller located inside the wing contour. To prove the value of the concept, wind tunnel experiment was undertaken. The prototype demonstrated ability to fly controllably at extremely high angles of attack. Moreover we present few disadvantages of these construction for example it was very sensitive to the motor settings, since every rpm change required immediate airplane trimming to maintain straight path of flight. This drawback can be eliminated by application of counter-rotating propeller. The status of the program is presented in the paper, including the most recent results, as well as currently undertaken experiments and plans for the nearest future.
Źródło:
Journal of KONES; 2015, 22, 4; 343-353
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Quantum Key as the Fiber Optic Security Sensor
Autorzy:
Życzkowski, M.
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/1399414.pdf
Data publikacji:
2013-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
42.30.Sy
02.60.-x
42.30.Tz
Opis:
The paper describes the methodology of identifying an interference in the optical fiber. The paper presents the technology widely known as quantum key distribution. The quantum key distribution is based on the technique of constant comparison of quantum characteristics of the input light source and its characteristics at the end of the fiber optic. Methodology of presented work includes the evaluation of the functional objectives through the constructive assumptions for the laboratory models development. This paper presents the model of a system based on the comparison of polarization states of light quanta using two asymmetric Mach-Zender interferometers as transmitting and receiving systems to enable compensation of polarization state changes at the input and output of the fiber optics sensing cable. Continuous monitoring of the state of the reference signal, the specific changes of natural or ambient effects on the fiber will attempt to identify interference in the optical waveguide as a change of the polarization of the quantum states of the light. The authors indicate the possibility of using such fiber optic sensor as a security sensor to protect the extensive critical infrastructure facilities. In this article the future research conception of using compressed sensing algorithms for data compression in quantum key distribution systems is presented.
Źródło:
Acta Physica Polonica A; 2013, 124, 3; 606-609
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Innowacyjne rozwiązania w technologii produkcji wielkogabarytowych odkuwek z ultraczystych stali dla urządzeń energetycznych
Innovative solutions in the technology for manufacturing large-size forgings from ultra-clean steels for power equipment
Autorzy:
Zdonek, B.
Szypuła, I.
Binek, S.
Kowalski, J.
Dudkiewicz, P.
Karbowniczek, M.
Barański, J.
Powiązania:
https://bibliotekanauki.pl/articles/181531.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Metalurgii Żelaza im. Stanisława Staszica
Tematy:
ultra czysta stal
wlewek do kucia
pokrywa izotermiczna
kształtka wirowa
ultra-clean steel
ingot for forging
isothermal cover
directional brick
Opis:
Przedstawiono trzy innowacyjne rozwiązania – rafinacji ciekłej stali we wlewnicy po odlaniu stali z zastosowaniem izotermicznej pokrywy i rafinacyjnej zasypki, syfonowego odlewania stali przez kształtkę kierunkową w kanale wlotowym do wlewnicy, służące zmniejszeniu lub wyeliminowaniu egzogenicznych wtrąceń niemetalicznych, pochodzących z procesu odlewania stali oraz odlewanie wlewków w komorze próżniowej z kadzi z zamknięciem suwakowym. Dzięki zastosowaniu tych rozwiązań znacznej poprawie uległa czystość stali, osiągając poziom wynoszący 0,06% mierzony udziałem powierzchniowym wtrąceń niemetalicznych, wielkość wtrąceń – mierzoną średnicą równoważną – mniejszą niż 4 μm oraz wskaźnik K4, mniejszy niż 10. Stworzyły one realne szanse produkcji ciężkich odkuwek na wały turbin wiatrowych, wodnych i parowych o coraz większej mocy dla nowoczesnej energetyki.
Three innovative solutions are presented: refining of liquid steel in an ingot mould after casting of steel using an isothermal cover and refining casting powder; uphill casting of steel through a swirl blade in inlet channel to a mould directional brick, which is used for reduction or elimination of exogenous non-metallic inclusions from the steel casting process; and casting of ingots in a vacuum chamber from a ladle with slide gate. The use of these solutions has resulted in significant improvement of steel purity, reaching the level of 0.06% as measured by surface fraction of nonmetallic inclusions, size of inclusions – as measured by equivalent diameter – less than 4 μm, and K4 coefficient – less than 10. They have provided real chances of manufacturing heavy forgings for wind, water and steam turbine shafts with higher and higher power for the modern power industry.
Źródło:
Prace Instytutu Metalurgii Żelaza; 2013, T. 65, nr 4, 4; 53-59
0137-9941
Pojawia się w:
Prace Instytutu Metalurgii Żelaza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantization error in time-to-digital converters
Autorzy:
Zaworski, Ł.
Chaberski, D.
Kowalski, M.
Zieliński, M.
Powiązania:
https://bibliotekanauki.pl/articles/221677.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
time interval measurement
time-to-digital converter
quantization error
averaging
Opis:
Methods of time interval measurement can be divided into asynchronous and synchronous approaches. It is well known that in asynchronous methods of time-interval measurement, uncertainty can be reduced by using statistical averaging. The motivation of this paper is an investigation of averaging in time interval measurements, especially in a synchronous measurement. In this article, authors are considering the method of averaging to reduce the influence of quantization error on measurement uncertainty in synchronous time-interval measurement systems, when dispersion of results, caused by noise is present. A mathematical model of averaging, which is followed by the results of numerical simulations of averaging of measurement series is presented. The analysis of results leads to the conclusion that in particular conditions the influence of the quantization error on measurement uncertainty can be minimized by statistical averaging, similar to asynchronous measurements.
Źródło:
Metrology and Measurement Systems; 2012, 19, 1; 115-122
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie układów FPGA w konstrukcji przepływomierzy ultradźwiękowych
Application of FPGA devices to ultrasonic flowmeter
Autorzy:
Zaworski, Ł.
Kowalski, M.
Zieliński, M.
Powiązania:
https://bibliotekanauki.pl/articles/156070.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
przepływomierz ultradźwiękowy
przetwornik czas-cyfra
układ programowalny
pomiar czasu
ultrasonic flowmeter
time-to-digital converter
programmable logic device
time measurement
Opis:
Przepływomierze ultradźwiękowe mierzące różnicę czasu przelotu impulsu przez medium stanowią jedną z dwóch najbardziej rozpowszechnionych grup przepływomierzy. W artykule tym została przedstawiona konstrukcja systemu pomiaru odcinka czasu zaimplementowanego w strukturze programowalnej FPGA jak również metoda kalibracji i wyznaczenia rozdzielczości przetwornika czas/cyfra w trakcie pomiaru. Takie rozwiązanie zapewnia niewrażliwość układu na czynniki zewnętrzne (temperatura), oraz skrócenie czasu pomiaru, a tym samym redukcję poboru energii, co jest atutem przy zasilaniu bateryjnym.
The ultrasonic flowmeter market is the fastest-growing market in any flowmeter type, and transit-time flowmeters have the largest share in that market. One of the fundamental parts of a transit-time ultrasonic flowmeter is a time measurement circuit, often implemented in CMOS ASIC. This paper describes an application of a low-power FPGA device to the transit-time flowmeter time measurement circuit. The main problem discussed in this work is calibration of a delay line in TDC implemented in a FPGA device. The time- and resource-consuming code density testing is undesirable for mass production devices. In this paper a fast and simple method for calibration is proposed. The method is based on measurement of the clock period length [5] and analysis of the data; therefore, it does not require implementation of any additional circuits in the device. A resolution of TDC is estimated by (2), when I_T is the largest state of a decoder in measurement series, and T_0 is clock period. The method uncertainty is larger than that of the code density test, but the method requires virtually no resources and takes less time - under certain conditions the calibration can be performed simultaneously with the measurement. At the end the measurement results and the conclusions are presented.
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 12, 12; 1511-1514
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pharmacokinetics and pharmacodynamics of a single dose of sustained-release azithromycin formulation in pigeons
Autorzy:
Zań, R.
Burmańczuk, A.
Stępień-Pyśniak, D.
Gajda, A.
Gbylik-Sikorska, M.
Posyniak, A.
Kowalski, C.
Grabowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/2087364.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
azithromycin
pigeon
pharmacokinetics
pharmacodynamics
dose
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 1; 43-50
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Factors affecting development of pioneering psammophilous dune vegetation on Przytorska Sandbar (Nature 2000 site "Wolin and Uznam" PLH320019)
Czynniki kształtujące rozwój pionierskiej psammofilnej roślinności wydmowej na mierzei Przytorskiej (obszar Natura 2000 "Wolin i Uznam" PLH320019)
Autorzy:
Wrobel, M.
Kowalski, W.W.A.
Powiązania:
https://bibliotekanauki.pl/articles/82900.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Źródło:
Folia Pomeranae Universitatis Technologiae Stetinensis. Agricultura, Alimentaria, Piscaria et Zootechnica; 2016, 37, 1(325)
2081-1284
Pojawia się w:
Folia Pomeranae Universitatis Technologiae Stetinensis. Agricultura, Alimentaria, Piscaria et Zootechnica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Personal identity verification method based on lips photographs
Autorzy:
Wrobel, K.
Doroz, R.
Porwik, P.
Naruniec, J.
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/333548.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
biometrics
lip features
data classification
biometria
cechy wargi
klasyfikacja danych
Opis:
The paper presents a personal identification method based on lips photographs. This method uses a new approach to the extraction and classification of characteristic features of the mouth from photographs. It eliminates the drawbacks that occur during the acquisition of lip print images with the use of the forensic method that requires special tools. Geometrical dimensions of the entire mouth as well as of the upper and lower lips were adopted as the features, on the basis of which the verification is performed. An ensemble classifier was used for the classification of the features obtained. The effectiveness of the classifier has been verified experimentally.
Źródło:
Journal of Medical Informatics & Technologies; 2015, 24; 59-65
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odpowiedź nasypu zbrojonego geosyntetykami na obciążenia parasejsmiczne
Response of reinforced soil slope to dynamic excitation
Autorzy:
Wrana, B.
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/349194.pdf
Data publikacji:
2008
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
grunt zbrojony
geosyntetyki
obciążenia parasejsmiczne
geosynthetic
reinforced soil
paraseismic excitation furnace slag
compactibility parameters
Opis:
W artykule rozważane jest zagadnienie metody obliczeń nasypu wzmocnionego geosyntetykami na obciążenia parasejsmiczne pochodzące od wstrząsów wywołanych eksploatacją górniczą. W artykule podano metodę zalecaną w normach obliczeń nasypów, opartą na koncepcji poślizgu bryły sztywnej. Na tle metody normowej w artykule przedstawiono metodę rozwiązania komputerowego. Przedstawiono rozwiązanie równania ruchu nasypu wzmocnionego geosyntetykami w postaci płaskiego stanu odkształcenia przy wymuszeniu kinematycznym jako wymuszeniu parasejsmicznym. Obliczenia przykładu wykonano przy zastosowaniu programu FLAC opartego na metodzie różnic skończonych.
The article, deal with the methods of calculation of a geosythetic reinforced retaining wall to semi-earthquake excitation. A brief review of recent applications of sliding block is given. An example of geosynthetic reinforced embankment under semi-earthquake excitation was analyzed compared to non-reinforced embankment. Calculations were performed in plane-stress with Finite Difference Method program FLAC.
Źródło:
Górnictwo i Geoinżynieria; 2008, 32, 2; 337-346
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rożnik przerośnięty (Silphium perfoliatum L.) nowa roślina alternatywna. Część II. Badania fitochemiczne
Autorzy:
Wolski, T.
Kowalski, R.
Mardarowicz, M.
Weryszko-Chmielewska, E.
Powiązania:
https://bibliotekanauki.pl/articles/802054.pdf
Data publikacji:
1999
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
Przeprowadzono badania fitochemiczne kwiatostanów, liści i kłączy rożnika przerośniętego Silphium perfoliatum L. Określono zawartość procentową wody, popiołu i olejku eterycznego w analizowanych organach rośliny. Po raz pierwszy wykazano obecność garbników oraz oznaczono ich zawartość procentową w badanych surowcach. Oceniono skład jakościowy i ilościowy związków chemicznych występujących w olejku eterycznym, otrzymanym z kwiatostanów nie poddawanych hydrolizie. Do najważniejszych zidentyfikowanych związków metodą GC/MS zaliczyć można: α-pinen, tlenek kariofilenu, germakren D, ß-oplopenon, spatulenol, ß-kariofilen, trans-verbenol, ß-pinen, kamfen, α-humulen. Analizowano skład zespołów wolnych kwasów fenolowych występujących w kwiatostanach i kłączach S. perfoliatum L. metodami TLC i HPLC. Stwierdzono obecność następujących kwasów fenolowych: kwasu protokatechowego, kwasu salicylowego, kwasu wanilinowego, kwasu kawowego, kwasu p-kumarowego, kwasu ferulowego.
Percentage of water as wellas the contents of ash, essential oils, phenolic acids in inflorescences, leaves and rhizomes of Silphium perfoliatum L. were evaluated in the experiment. The presence and amounts of tannins in raw materials were determined for the first time. Moreover the compounds of essential oil in inflorescences were analysed using GC/MS method. GC/MS study revealed the following main components of essential oil: α-pinene, ß-caryophyllene, germacrene D, ß-oplopenone, spathulenol, ß-caryophyllene, trans-verbenol, ß-pinen, camphene and a-humulene. In rhizomes and inflorescences the complexes of free phenolic acids were identified. Protocatechuic, salicylic, vanilic, caffeic, p- coumaric and ferulic acids were identified as phenolic acids using TLC and HPLC chromatographic analysis.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 1999, 468
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwój kartografii geologicznej na Górnym Śląsku w świetle wybranych map historycznych - od Leopolda von Bucha do Stanisława Doktorowicza-Hrebnickiego
Development of geological mapping of Upper Silesia in the light of selected historical maps - from Leopold von Buch to Stanisław Doktorowicz-Hrebnicki
Autorzy:
Wołkowicz, S.
Graniczny, M.
Wołkowicz, K.
Urban, H.
Kowalski, Z.
Zdanowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/167470.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
historia
kartografia geologiczna
Górny Śląsk
history of geology
geological cartography
Upper Silesia
Opis:
Pierwszą, bardzo ogólnikową, mapę geologiczną Górnego Śląska opracował von Buch (1797/1802), natomiast Schulze z Eisleben (1816) opracował przekrój geologiczny od Hulczyna do Bytomia i jako pierwszy wprowadza podział stratygraficzny, wyróżniając m.in. Steinkohlengebirge. Staszic (1815) na swojej mapie odnotowuje na tym obszarze obecność charbon de terre. Za pierwszą nowoczesną mapę Górnego Śląska należy uznać mapę Oeynhausena (1822), która zawiera 18 wydzieleń o charakterze litologiczno-stratygraficzym. W dalszej kolejności na uwagę zasługują mapy Puscha (1836) oraz Carnalla (1844). Za największe dokonanie XIX wieku w kartografii geologicznej Górnego Śląska należy uznać 12-arkuszowy atlas opracowany pod kierunkiem Roemera (1870) wraz z dwutomowym tekstem opisującym geologię tego obszaru. Kolejnym opracowaniem tej rangi było dzieło Michaela (1913), również obficie ilustrowane mapami. Z autorów polskich II. połowy XIX w. należy odnotować mapy opracowane przez Hempla (1857), Łempickiego i Gatowskiego (1891), Zaręcznego (1894) i Wójcika (1909). W niepodległej Polsce pierwszą mapę opisywanego obszaru opracował Przesmycki (1923). W okresie międzywojennym znakomitym znawcą geologii Polskiego Zagłębia Węglowego był Saryusz-Makowski, którego rękopiśmienny dorobek został zniszczony w czasie działań wojennych w 1939 r. W latach 20. XX w. rozpoczął swoje prace Doktorowicz-Hrebnicki, który badał obszar Górnego Śląska przez około 50 lat, a jego mapa Arkusz Grodziec (1934) staje się wzorcowym opracowaniem kartograficznym obowiązującym przez wiele lat.
First, very general geological map of Upper Silesia was elaborated by von Buch (1797/1802). On the other hand Schulze from Eisleben (1816) prepared geological cross-section from Hulczyn to Bytom, where he introduced first stratigraphic division, distinguishing among others Steinkohlengebirge. Staszic (1815) noticed on his map the presence of charbon de terre in this area. Oeynhausen map (1822) should be regarded the first modern geological map of the Upper Silesia, as containing 18 lithological-stratigraphical divisions. Further attention should be paid to maps of Pusch (1836) and Carnall (1844). Next important work was greatest achievement of geological cartography of the Upper Silesia in XIX century is the 12-sheet Atlas developed under the direction of Roemer (1870) together with two-volume text, describing the geology of this area. Next important work was done by Michael (1912) which was also profusely illustrated with maps. Among the Polish authors of the second half of XIX century, maps elaborated by Hempel (1857), Łempicki and Gatowski (1891), Zaręczny (1894) and Wójcik (1909) should be noted. In the independent Poland, the first map of this area was compiled by Przesmycki (1923). Between the World Wars, an excellent expert in the Polish Coal Basin was Saryusz-Makowski whose manuscripts, documentations and maps were destroyed during the war in 1939. In the 20´s of XX century, Doktorowicz-Hrebnicki started his researchers. He has studied the area of Upper Silesia for almost 50 years. His map Grodziec (1934) has become the standard of geological cartography art for many years.
Źródło:
Przegląd Górniczy; 2015, 71, 3; 107-118
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka uszkodzeń uzwojeń stojana silnika indukcyjnego z wykorzystaniem dyskretnej transformaty falkowej obwiedni prądu stojana
Diagnosis of induction motor stator winding fault using discrete wavelet analysis of the stator current envelope
Autorzy:
Wolkiewicz, M.
Kowalski, C.
Powiązania:
https://bibliotekanauki.pl/articles/1367714.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
silnik indukcyjny
zwarcia zwojowe
obwiednia prądu stojana
dyskretna transformata falkowa
induction motor
inter-turn fault
envelope of stator current
discrete wavelet transforms
Opis:
This paper deals with the application of stator current envelope analysis in the incipient diagnosis of the stator winding short circuits. To separate of the characteristic symptoms of stator damage Discrete Wavelet Transform were used. Based on this analysis the energy coefficients of the stator current envelope for the chosen decomposition levels were calculated. The proposed method was implemented for a small power induction motor (with special physical modeling of shorted turns in the stator phases) supplied by voltage source inverter in open control loop. The virtual measurement-diagnostic device, developed in the LabVIEW environment includes algorithms: data acquisition, Hilbert transform for the determination of stator current envelope and wavelet transform to extract the failure symptoms. Experimental results presented In this paper show that changes of the proposed energy factor constitutes a very efficient index for the evaluation of the stator winding state.
W artykule przedstawiono analizę możliwości wykorzystania sygnału obwiedni prądu fazowego stojana do wykrywania zwarć zwojowych, w możliwie wczesnej fazie powstania uszkodzenia. Do wyodrębnienie charakterystycznych dla uszkodzenia stojana symptomów wykorzystano dyskretną transformatę falkową oraz obliczony na jej podstawie współczynnik zmian energii sygnału dla wybranych poziomów dekompozycji. Badania eksperymentalne zrealizowano dla silnika indukcyjnego małej mocy zasilanego z przemiennika częstotliwości w otwartej pętli sterowania (sterowanie skalarne U/f=const). Środowisko LabVIEW posłużyło do zaprojektowania oraz przetestowania aplikacji przyrządu pomiarowo-diagnostycznego. Aplikacja zawierała algorytmy: akwizycji danych, transformaty Hilberta do wyznaczenia obwiedni sygnału oraz transformaty falkowej sygnału do wyodrębnienia symptomów uszkodzenia. Zmiany wartości współczynnika zmian energii dla obwiedni prądu stojana dla poszczególnych poziomów dekompozycji okazały się bardzo dobrym kryterium oceny stanu uzwojenia stojana.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 3, 107; 13-18
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monitorowanie stanu uzwojeń stojana w zamkniętej strukturze sterowania prędkością silnika indukcyjnego
Stator winding condition monitoring in a field – oriented control of induction motor drive
Autorzy:
Wolkiewicz, M.
Tarchała, G.
Kowalski, C. T.
Powiązania:
https://bibliotekanauki.pl/articles/1813900.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
silnik indukcyjny
sterowanie wektorowe
struktura DFOC
monitorowanie
uszkodzenia uzwojenia stojana
Opis:
Issues of stator winding faults (short-circuit turns) of an induction motor working in the direct field oriented control (DFOC) structure are discussed in this paper. The mathematical model and DFOC control structure with decoupling block are shortly described and tested in simulations. It is shown in experimental tests, that even single short-circuit turns of the stator winding cause significant changes in stator currents (in negative current sequence component and in vector hodograph) as well as in virtual signals, available in the DFOC structure ex, ey, fx, fy, which are accessible in the digital control structure in DSP.
Źródło:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały; 2013, 69, 33; 387--400
1733-0718
Pojawia się w:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nieinwazyjne metody wczesnego wykrywania zwarć zwojowych w silniku indukcyjnym zasilanym z przemiennika częstotliwości, cz. I
Non-invasive early detection methods of shorted turns in converter-fed induction motor, part I
Autorzy:
Wolkiewicz, M.
Kowalski, C. T.
Powiązania:
https://bibliotekanauki.pl/articles/1373321.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
silnik elektryczny
silnik indukcyjny
zwarcie zwojowe
prąd stojana
składowe symetryczne
monitorowanie
Opis:
This paper deals with the problem of the early stator faults (the short-circuits) detection and localization of the induction motors supplied from the frequency converter. A stator fault detection method based on monitoring of RMS stator current value, the phase shift between the line currents, the spectral analysis of the line current and negative current symmetrical component analysis are presented. Tests were realized for different load torque and supply frequencies, what enabled the evaluating of the usefulness of the proposed analysis in the diagnostics of the stator faults in the converter-fed induction motor drives.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2010, 87; 145-150
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies