Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, Y.-K." wg kryterium: Autor


Tytuł:
Simulated impacts of rainfall extremes on yield responses of various barley varieties in a temperate region
Autorzy:
Yoon, C.Y.
Kim, S.
An, K.N.
Powiązania:
https://bibliotekanauki.pl/articles/2083065.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
barley
rainfall
simulation
food cost
grain
yield
Opis:
As population rises, more people need to be fed. With increasing income, the potential exists for increases in the demand for cereals (i.e., barley). Since barley has a high level of tolerance to environmental stressors, this crop has been recommended as a potential crop for food security in marginal environments. In this study, a crop growth Agricultural Land Management Alternatives with Numerical Assessment Criteria model, was parameterized and used to simulate the yields of two barley types grown in a temperate environment at a latitude of 35°N. In order to apply this crop model to barley, 19 years of field data were used to model calibration and validation. As a result, the ALMANAC model accurately simulated yields for both barley types. The validated model was used to predict yields under three diverse seasonal rainfall scenarios associated with different patterns of the Central Pacific El Niño influence. According to the simulation results, excessively high seasonal rainfall decreased barley yields. Crop price and annual revenue of the two barley types were also evaluated using a non-linear regression model. For the malt type, the food price was higher with a higher rainfall, while naked barley had a higher revenue under the conditions of a lower rainfall.
Źródło:
International Agrophysics; 2021, 35, 2; 119-129
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Warm Tensile Deformation Behavior and Constitutive Equation of Supersaturated Solid-Solutionized Al-9Mg Extruded Alloy
Autorzy:
Yang, Seung Y.
Kim, Bong H.
Lee, Da B.
Choi, Kweon H.
Kim, Nam S.
Ha, Seong H.
Yoon, Young O.
Lim, Hyun K.
Kim, Shae
Kim, Young J.
Powiązania:
https://bibliotekanauki.pl/articles/2048882.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum alloy
Al-9Mg alloy
tensile test
constitutive equation
Opis:
In this paper, as a purpose to apply the supersaturated solid-solutionized Al-9Mg alloy to the structural sheet parts of automotive, tensile tests were conducted under the various conditions and a constitutive equation was derived from the tensile test results. Al-9Mg alloy was produced using a special Mg master alloy containing Al2Ca during the casting process and extruded into the sheet. In order to study the deformation behavior of Al-9Mg alloy in warm temperature forming environments, tensile tests were conducted under the temperature of 373 K-573 K and the strain rate of 0.001/s~0.1/s. in addition, by using the raw data obtained from tensile tests, a constitutive equation of the Al-9Mg alloy was derived for predicting the optimized condition of the hot stamping process. Al-9Mg alloy showed uncommon deformation behavior at the 373 K and 473 K temperature conditions. The calculated curves from the constitutive equation well-matched with the measured curves from the experiments particularly under the low temperature and high strain rate conditions.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 1013-1018
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Substituted Elements on Reflection Loss of Ba-Ferrite Nanoparticle
Autorzy:
Yang, S.
Jeong, K.-P.
Park, S.-Y.
Kim, J.-G.
Powiązania:
https://bibliotekanauki.pl/articles/352041.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ba ferrite
substitutional m-type ferrite
reflection loss
sol-gel
additional atom
Opis:
Due to the rapid development of the information communication industries, it is expected that next-generation mobile communication devices in the data communication environment will be used at the same time in the L~X band (1–12 GHz). To mutual electric wave interference prevention, research on wave absorbers in L~X band is needed. In this paper, barium ferrite was researched as L~X band wave absorber. The Barium ferrite (BaM, Ba ferrite) substituted by divalent ions (Co2+, Cu2+, Ni2+, Zn2+) and tetravalent ion (Ti4+). The substituted Ba ferrite nanoparticles were fabricated by sol-gel process. Lattice parameter, particle size, magnetic properties, and reflection loss were analyzed by X-ray diffraction (X-RD), a Vibrating Sample Magnetometer (VSM), and a Network Analyzer. Lattice parameter of Ba ferrite was changed 0.0005 to 0.0078 Å in a-b direction, and 0.0187 to0.0445 Å in c-direction by substituted elements, and it influenced on magnetic anisotropy. In addition, Co-Ti substitution elements influenced that coercive force decrease 5,739 to 2,240 Oe. Moreover, reflection loss frequencies were shifted from 16.3 GHz to 14.4 and 17.4 GHz by substituted elements Co-Ti and Zn-Ti.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1201-1204
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Manufacturing and Macroscopic Properties of Y2O3 Coating Layer on Ceramic (AlN) Substrate Fabricated by Aerosol Deposition
Autorzy:
Wi, D.-Y.
Ham, G.-S.
Kim, S.-H.
Lee, K.-A.
Powiązania:
https://bibliotekanauki.pl/articles/353052.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aerosol deposition
Y2O3 coating layer
AlN matrix
nano indentation
Opis:
This study attempted to manufacture an Y2O3 ceramic coating layer on a ceramic (AlN) substrate using aerosol deposition (AD) and investigated its macroscopic properties. Pure Y2O3 powder with a polygonal shape and average size of 5.0 μm was used as initial feedstock. Using aerosol deposition with suitable process conditions, an Y2O3 coating layer was successfully fabricated on aluminum nitride (AIN). The thickness of the manufactured coating layer was approximately 10 mm. The coating layer consisted of Y2O3 phase identical to that in the initial powder, and no additional oxides were identified. In regard to the roughness of the Y2O3 coating layer, the average roughness (Ra) measured 1.32 μm, indicating that the surface roughness was relatively even compared to the initial powder size (5 μm). Mechanical properties of the Y2O3 coating layer were measured using nano indentation equipment, and the indentation modulus of the Y2O3 coating layer fabricated by aerosol deposition measured 136.5 GPa. The interface of the coating layer was observed using TEM, and the deposition mechanism of the Y2O3 coating layer manufactured by aerosol deposition was also discussed.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1463-1466
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Diffusion of 57Co into Rh Foil for Preparing Mössbauer Source
Autorzy:
Uhm, Y. R.
Kim, J. J.
Choi, S. M.
Son, K. J.
Powiązania:
https://bibliotekanauki.pl/articles/352775.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Mössbauer source
diffusion
electroplating
57Co/Rh
Opis:
To establish the coating conditions for 57 Co, non-radioactive Co ions are dissolved in an acid solution and electroplated on to a rhodium plate. The thermal diffusion of electroplated Co into a rhodium matrix was studied to apply a 57 Co Mössbauer source. The procedure to form a Co deposited onto Rh foil was established using two different electroplating baths: the acid-based buffer (pH 3) containing boric acid, sodium chloride, and saccharin, and the alkaline-based buffer (pH 10) containing hydrazine hydrate and ammonium citrate. The influence of different annealing conditions was investigated. From the results, the best diffusion degree of electrodeposited Co onto the rhodium matrix was obtained in an annealing process performed at 1100°C for 3 h in vacuum over 10-5 hPa.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1249-1252
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of High-Strength Gray Cast Iron Using Permanent Magnet Scrap
Autorzy:
Park, S.-Y.
Kim, J. H.
Seo, S. J.
On, J. S.
Lim, K. M.
Powiązania:
https://bibliotekanauki.pl/articles/352204.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gray cast iron
rare earth element
Nd-Fe-B magnet scrap
graphite formation
microstructure
Opis:
In this study, we have developed the manufacturing technology for high strength gray cast irons by using the spent permanent magnet scraps. The cast specimen inoculated by using a spent magnet scraps showed the excellent tensile strength up to 306MPa. This tensile strength value is 50MPa higher than that of the specimen cast without inoculation, and is similar to that of the specimen inoculated by using the expensive misch-metal. These superior mechanical properties are attributed to complex sulfides created during solidification that promote the formation and growth of Type-A graphite. It is therefore concluded that spent magnets scrap can provide an efficient and cost-effective inoculation agent for the fabrication of high-performance gray cast iron.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1113-1117
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and Optical Properties of Hydrothermally Synthesized ZnO and $Zn_{0.99}O:Eu^{3+}$ Powders
Autorzy:
Park, K.
Hakeem, D.
Kim, J.
Kim, Y.
Kim, S.
Powiązania:
https://bibliotekanauki.pl/articles/1398243.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.55.-m
78.55.Hx
78.55.Et
Opis:
The structural and optical properties of the ZnO and $Zn_{0.99}O:Eu^{3+}$ powders synthesized by the hydrothermal method at two different temperatures (150°C and 250°C) were studied. The ZnO and $Zn_{0.99}O:0.01Eu^{3+}$ powders synthesized at 150 and 250°C showed rod- and flower-like morphologies, respectively. The as-synthesized and annealed ZnO and $Zn_{0.99}O:0.01Eu^{3+}$ powders formed the wurtzite crystal structure and P6₃mc space group. The crystallite size of the as-synthesized and annealed ZnO powders increased by the incorporation of $Eu^{3+}. The photoluminescence properties of annealed $Zn_{0.99}O:0.01Eu^{3+}$ powders were substantially improved by controlling the synthesis temperature. The annealed $Zn_{0.99}O:0.01Eu^{3+}$ powders synthesized at 250°C displayed much stronger emission intensity than those at 150°C.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 902-906
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth of NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ Superconducting Thin Films on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) Substrates
Autorzy:
Park, J.-C.
Ha, D. H.
Kim, I.-S.
Park, Y.K.
Powiązania:
https://bibliotekanauki.pl/articles/1964239.pdf
Data publikacji:
1997-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.76.Bz
Opis:
NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ superconducting thin films were grown on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) substrates by off-axis rf sputtering and pulsed laser deposition. The effects of several deposition parameters, e.g. gas pressure, substrate temperature and energy density were studied. Thin films grown by off-axis rf sputtering were highly c-axis oriented, but those by pulsed laser deposition were predominantly a-axis oriented under our deposition conditions. However, the c-axis oriented portion for the films grown by pulsed laser deposition was increased by increasing the temperature above 800°C. T$\text{}_{c(zero)}$ was 87 K and 83 K for the c- and a-axis oriented films respectively. The critical current density of c-axis oriented films was 10$\text{}^{6}$-10$\text{}^{7}$ A/cm$\text{}^{2}$ below 60 K.
Źródło:
Acta Physica Polonica A; 1997, 92, 1; 105-114
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compositional Dependence of Hardness of Ge-Sb-Se Glass for Molded Lens Applications
Zależność stężeniowa twardości szkła Ge-Sb-Se do zastosowań na formowane soczewki
Autorzy:
Park, J. K.
Lee, J. H.
Shin, S. Y.
Yi, J. H.
Lee, W. H.
Park, B. J.
Choi, J. H.
Kim, N. Y.
Choi, Y. G.
Powiązania:
https://bibliotekanauki.pl/articles/352228.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
chalcogenide glasses
Ge-Sb-Se glass
infrared lens
molded lens
infrared camera
szkło
Ge-Sb-Se
soczewki formowane
twardość szkła
kamera termowizyjna
Opis:
Chalcogenide glass in the ternary Ge-Sb-Se system is inherently moldable, thus being considered as a strong candidate material for use in infrared-transmitting lens applications from the viewpoint of thermal and mechanical stability. In an effort to experimentally determine compositional region suitable for the molded lens applications, we evaluate its compositional dependence of hardness. Among the constituent atoms, Ge content turns out to exert a most conspicuous correlation with hardness. This phenomenological behavior is then explained in connection with the structural evolution that Ge brings about.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1205-1208
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization Of The Graded Microstructure In Powder Sintered Porous Titanium
Charakterystyka gradientowej mikrostruktury porowatego tytanu spiekanego z proszku
Autorzy:
Oak, J.-J.
Bang, J. I.
Bae, K.-C.
Kim, Y. H.
Lee, Y. C.
Chun, H. H.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/356239.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
powder metallurgy
porous structure
sintering
biomaterial
tytan
metalurgia proszków
struktura porowata
spiekanie
biomateriał
Opis:
The proposed sintering process produce porosity and functional graded microstructure in the sinterd titanium powders. Titanium powders with different micro sizes were sintered at the proposed temperature region at 1200 and 1300°C for 2h. The apatite-forming on the graded microstructure is observed by immersion test in Hanks balanced salt soluion at 37°C. Sintering condition of titanium powders is estimated by thermogravitmetry-differential thermal analysis (TG-DTA). The synthersied surface structures and apatite-forming ability were characterized by a field emission scanning electron microscopy (FE-SEM) observation and energy dispersive X-ray spectroscopy (EDS) analysis. As results, these graded microstructure of sintered porous titanium powders reveals apatite-forming ability as osseointegration by calcification in Hanks balanced salt soluion(HBSS) at 37°C.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1265-1269
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Hafnium and Zirconium to Glass Forming Ability, Thermal Stability, Plasticity Deformation and Crystallization of Ni-Free Pentabasic Ti-Based Bulk Metallic Glasses
Autorzy:
Oak, J.-J.
Kim, Y. H.
Bae, K.-C.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/352087.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti-based alloy
metallic glass
Ti fiber
glass formability
plastic deformation
Opis:
The newly designed Ti-based bulk metallic glass (BMG) in which case of fracture behavior was observed 1990MPa to compressive strength with a wide plastic deformation around 7% after process of elastic deformation. This phenomenon can be compared with those of Ti-based alloys and other Ti-based BMGs and indicates high potential to be applied in use. It was evaluated the Ti-based BMG for thermal stability that the reduced glass parameters, ΔTx, Trg and γ, are 79K, 0.50 and 0.38, respectively. In addition, it reveals high activation energies for crystallization in which are estimated to Ex1 = 291.77 ±9.71 kJ/mol, Ex2 = 588.77 ±28.88 kJ/mol and Ex3 = 330.26 ±3.61 kJ/mol on kissinger plotting in this study.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1081-1087
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Characterization of Metallic Fuel Slugs Prepared by Modified Injection Casting
Autorzy:
Mun, S.-U.
Kim, K.-H.
Oh, S.-J.
Park, J.-Y.
Hong, S.-I.
Powiązania:
https://bibliotekanauki.pl/articles/351428.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium-cooled fast reactor
metallic fuel slug
U-Zr alloy
surface characterization
injection casting
Opis:
Metallic fuel slugs containing rare-earth (RE) elements have high reactivity with quartz (SiO2) molds, and a reaction layer with a considerable thickness is formed at the surface of metallic fuel slugs. The surface characterization of metallic fuel slugs is essential for safety while operating a fast reactor at elevated temperature. Hence, it is necessary to evaluate the surface characteristics of the fuel slugs so that chemical interaction between fuel slug and cladding can be minimized in the reactor. When the Si element causes a eutectic reaction with the cladding, it deteriorates the metallic fuel slugs. Thus, it is necessary to examine the characteristics of the surface reaction layer to prevent the reaction of the metallic fuel slugs. In this study, we investigated the metallurgical characteristics of the surface reaction layer of fabricated U-10wt.%Zr-Xwt.%RE (X = 0, 5, 10) fuel slugs using injection casting. The results showed that the thickness of the surface reaction layer increased as the RE content of the metallic fuel slugs increased. The surface reaction layer of the metallic fuel slug was mainly formed by RE, Zr and the Si, which diffused in the quartz mold.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1049-1053
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spontaneous Formation of Titanium Nitride on the Surface of a Ti Rod Induced by Electro-Discharge-Heat-Treatment in an N2 Atmosphere
Autorzy:
Lee, W. H.
Yoon, Y. H.
Kim, Y. H.
Lee, Y. K.
Kim, J. Y.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/352477.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium
surface modification
diffusion
heat treatment
XPS
Opis:
A single pulse of 2.0 to 3.5 kJ of input energy from a 450 mF capacitor was applied to a commercially pure Ti rod in a N2 atmosphere. The surface of the Ti rod transformed from TiO2 into titanium nitride in times as short as 159 msec, providing a bimodal morphology of the cross-section. A much higher value of hardness that was observed at the edge of the cross-section was attributed to nitrogen-induced solid-solution hardening that occurred during the electrical discharge process. The activation energy (Ea) for the diffusion process was estimated to be approximately 86.9 kJ/mol. Results show that the electrical discharge process is a possible potential method for the nitriding of Ti; advantages include a short processing time and control of the nitrided layer without dimensional changes.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1281-1285
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Heat Treatment on Microstructure and Impact Toughness of Ti-6Al-4V Manufactured by Selective Laser Melting Process
Autorzy:
Lee, K.-A.
Kim, Y.-K.
Yu, J.-H.
Park, S.-H.
Kim, M.-C.
Powiązania:
https://bibliotekanauki.pl/articles/354570.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
selective laser melting
Ti-6Al-4V
microstructure
impact toughness
heat treatment
Opis:
This study manufactured Ti-6Al-4V alloy using one of the powder bed fusion 3D-printing processes, selective laser melting, and investigated the effect of heat treatment (650°C/3hrs) on microstructure and impact toughness of the material. Initial microstructural observation identified prior-β grain along the building direction before and after heat treatment. In addition, the material formed a fully martensite structure before heat treatment, and after heat treatment, α and β phase were formed simultaneously. Charpy impact tests were conducted. The average impact energy measured as 6.0 J before heat treatment, and after heat treatment, the average impact energy increased by approximately 20% to 7.3 J. Fracture surface observation after the impact test showed that both alloys had brittle characteristics on macro levels, but showed ductile fracture characteristics and dimples at micro levels.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1341-1346
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Manufacturing And High Temperature Oxidation Properties Of Electro-Sprayed Fe-24.5% Cr-5%Al Powder Porous Metal
Wytwarzanie i wysokotemperaturowe utlenianie elektro-rozpylanego porowatego proszku Fe-24.5% Cr-5%Al
Autorzy:
Lee, K-A.
Oh, J-S.
Kong, Y-M.
Kim, B-K.
Powiązania:
https://bibliotekanauki.pl/articles/350912.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder porous metal
electro-spray process
electric wire explosion
Fe-24Cr-5Al
high temperature oxidation
porowaty proszek metalu
elektrorozpylanie
utlenianie wysokotemperaturowe
Opis:
Fe-Cr-Al based Powder porous metals were manufactured using a new electro-spray process, and the microstructures and high-temperature oxidation properties were examined. The porous materials were obtained at different sintering temperatures (1350°C, 1400°C, 1450°C, and 1500°C and with different pore sizes (500 μm, 450 μm, and 200 μm). High-temperature oxidation experiments (TGA, Thermal Gravimetry Analysis) were conducted for 24 hours at 1000°C in a 79% N2+ 21% O2, 100 mL/min. atmosphere. The Fe-Cr-Al powder porous metals manufactured through the electro-spray process showed more-excellent oxidation resistance as sintering temperature and pore size increased. In addition, the fact that the densities and surface areas of the abovementioned powder porous metals had the largest effects on the metal’s oxidation properties could be identified.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1169-1173
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies