Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, Jin" wg kryterium: Autor


Tytuł:
Fabrication and Characterization of GaN/Polymer Composite p-n Junction with PEDOT Nanoparticle Interface Layer
Autorzy:
Kim, M.
Jin, S.
Choi, H.
Kim, G.
Yim, K.
Kim, S.
Nam, G.
Yoon, H.
Kim, Y.
Lee, D.
Kim, Jin
Kim, Jong
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1505152.pdf
Data publikacji:
2011-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.61.Ey
81.15.Gh
Opis:
A heavily Si-doped GaN/polymer hybrid structure with p-type poly(3,4-ethylene-dioxythiophene):beta-1,3-glucan (PEDOT nanoparticle) interface layer has been fabricated. The Si-doped GaN thin film with carrier concentration of 1 × $10^{19} cm^{-3}$ was grown by metal-organic chemical vapor deposition. The PEDOT nanoparticle with various sizes ranging from 60 to 120 nm was synthesized via a miniemulsion polymerization process. The electrical conductivity of the PEDOT nanoparticle is less than 1.2 S/cm. The current-voltage (I-V) characteristic of the hybrid structure shows diode-like behavior. The I-V characteristic was examined in the framework of the thermionic emission model. The ideality factor of the structure without PEDOT nanoparticle interface layer is 12.9. However, the ideality factor of the hybrid structure with PEDOT nanoparticle interface layer is obtained as 1.9. The value of ideality factor is dramatically decreased by inserting the PEDOT nanoparticle interface layer.
Źródło:
Acta Physica Polonica A; 2011, 119, 6; 875-879
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth and Characterization of Indium-Doped Zinc Oxide Thin Films Prepared by Sol-Gel Method
Autorzy:
Kim, M.
Yim, K.
Kim, S.
Nam, G.
Lee, D.
Kim, Jin
Kim, Jong
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1491351.pdf
Data publikacji:
2012-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Dz
81.20.Fw
78.66.Hf
Opis:
Indium-doped ZnO thin films were deposited by sol-gel spin-coating method with various In content. The effects of In content on the structural and optical properties of the indium-doped ZnO thin films were investigated by scanning electron microscopy, X-ray diffraction, and UV-visible spectroscopy. The particle-like surface morphology and the crystallinity of the indium-doped ZnO thin films were affected by change in the In content, especially at the In content of 3 at.%. The values of direct band gap were decreased with increase in the In content. The width of localized states in the optical band gap of the indium-doped ZnO thin films were changed with In content and the Urbach energy $(E_{U})$ was changed inversely with optical band gap of the indium-doped ZnO thin films.
Źródło:
Acta Physica Polonica A; 2012, 121, 1; 217-220
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ZnO Nanorods on Nanofibrous ZnO Seed Layers by Hydrothermal Method and Their Annealing Effects
Autorzy:
Yim, K.
Jeon, S.
Kim, M.
Kim, S.
Nam, G.
Lee, D.
Kim, Jin
Kim, Jong
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1491348.pdf
Data publikacji:
2012-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Dz
81.15.Lm
78.55.Et
Opis:
ZnO nanorods were grown by using the hydrothermal method on p-type Si (100) substrates with nanofibrous ZnO seed layers. Before the ZnO nanorods growth, nanofibrous ZnO seed layers were spin-coated onto the Si substrates. The structural and optical properties of ZnO nanorods were characterized by scanning electron microscopy, X-ray diffraction, and photoluminescence. The fibrous ZnO nanorods is possible due to the surface morphology of the nanofibrous ZnO seed layers. To investigate annealing effects of the ZnO nanorods, the post-annealing process was carried out at various temperatures ranging from 300 to 700C under argon conditions. The structural and optical properties of the ZnO nanorods were also affected by the post-annealing treatment.
Źródło:
Acta Physica Polonica A; 2012, 121, 1; 214-216
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Education and Research on Polish Studies in Korea
Autorzy:
Cheong, Kwon Byung
Kim, Jong Suck
Choi, Sung Eun (Estera Czoj)
Kim, Yong Deog
Kim, Ji Young
Lee, Ok Jin
Lee, Ji Wone
Koh, Seung Hui
Powiązania:
https://bibliotekanauki.pl/articles/26414309.pdf
Data publikacji:
2013-06-30
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
Polish studies
Korea
Department of Polish Studies
HUFS
Opis:
Polish education and research in Korea has become systematic since the establishment of the Department of Polish Studies at Hankuk University of Foreign Studies (HUFS). The Department of Polish Studies at HUFS is the only academic department in Korea which teaches and studies the politics, economy, history, and culture of Poland, as well as the Polish language and literature. Since its establishment in 1987, the department has produced more than 800 graduates. The Department of Polish Studies forms and maintains a close relationship with universities in Poland. It also makes continuous effort for more students to study the Polish language at universities in Poland.
Źródło:
The New Educational Review; 2013, 32; 19-34
1732-6729
Pojawia się w:
The New Educational Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microzooplankton in a Warming Arctic: A Comparison of Tintinnids and Radiolarians from Summer 2011 and 2012 in the Chukchi Sea
Autorzy:
Dolan, John R.
Yang, Eun Jin
Kim, Tae Wan
Kang, Sung-Ho
Powiązania:
https://bibliotekanauki.pl/articles/763780.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Jagielloński. Wydawnictwo Uniwersytetu Jagiellońskiego
Tematy:
Climate change, plankton, rhizaria, sea ice, Tintinnina
Opis:
The Chukchi Sea was sampled in August of 2011, a year of near-normal sea ice among recent years, and again in August 2012, a year of all time record low sea ice. We exploited this sampling to test the hypothesis that different sea ice conditions are associated with differences in abundances or species composition of microzooplankton through an examination of tintinnids and radiolarians. From 18 stations in 2011, and 19 stations in 2012, organisms were enumerated in plankton net tow material, and chlorophyll determinations made (total and ≤ 20 μm) from discrete depth samples. We found that the low sea ice conditions of 2012 were associated with higher chlorophyll concentrations (both total and the ≤ 20 μm size fraction), compared to 2011. However, tintinnid ciliates and radiolarians were much lower in concentration, by about an order of magnitude, compared to 2011. In both years the radiolarian assemblage was dominated by Amphiselma setosa. The species composition of the tintinnid ciliates was similar in the two years, but there were distinct differences in the relative abundances of certain species. The 2012, low sea ice assemblage, was dominated by small forms in contrast to 2011, when large species were the most abundant. We present these findings in detail and discuss possible explanations for the apparent differences in the microzooplankton communities associated with distinct sea ice conditions in the Chukchi Sea.
Źródło:
Acta Protozoologica; 2014, 53, 1
1689-0027
Pojawia się w:
Acta Protozoologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Measures for the Improvement of History Education for Chinese Students in South Korea
Autorzy:
Hyoung-jin, Moon
Jong-ho, Nam
Yong-deog, Kim
Powiązania:
https://bibliotekanauki.pl/articles/2031731.pdf
Data publikacji:
2014-09-30
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
Chinese students
history knowledge
history teaching methods
Korean history
Opis:
The objective of this research was to find a more effective method for the teaching of history to Chinese students studying in South Korean universities. Questionnaire surveys and interviews were conducted to investigate those students’ level of knowledge and perceptions of Korean history. Then, in history classes, four teaching methods (comparative-historical, audiovisual, history and language, and rote memorization) were applied over two weeks. Before the treatment, Chinese students said that they liked the audiovisual teaching method the most, but after taking the classes, they preferred the teaching method comparing Korean and Chinese histories. Besides the finding that the comparative method was the most popular, the responses also showed that it was the most effective one in teaching history to Chinese students.
Źródło:
The New Educational Review; 2014, 37; 54-65
1732-6729
Pojawia się w:
The New Educational Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Measures to Improve Korean Culture Education for Chinese Students in South Korea: Focusing on Racial Differences
Autorzy:
Kim, Yongdeog
Nam, Jong-ho
Moon, Hyoung-Jin
Powiązania:
https://bibliotekanauki.pl/articles/1997568.pdf
Data publikacji:
2017-12-31
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
Chinese students
culture knowledge
culture teaching methods
Korean culture
Opis:
To derive a more effective educational method, racial differences among Chinese students in learning Korean culture was invesigated using a survey method. The Han and Joseon racial groups in China were examined. Before the survey, the Han race students (Chinese students except Joseon race students, in this case) preferred a language and culture teaching method (LCTM), whereas the Joseon race students favored an audiovisual teaching method (AVTM). However, after experiencing four different teaching methods – comparative-cultural teaching method (CCTM), AVTM, LCTM, and rote memorization teaching method—for two weeks, the Han race students preferred the AVTM more, whereas the Joseon race students preferred the CCTM. Thus, students from the same country require different education methods.
Źródło:
The New Educational Review; 2017, 50; 146-158
1732-6729
Pojawia się w:
The New Educational Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Improved MSA Model for Evaluating the Sound Transmission Loss of a Rectangular Plate for Diffuse Field Incidence
Autorzy:
Kim, Myong-Jin
Won, Kyong-Su
Ri, Chol-Su
Powiązania:
https://bibliotekanauki.pl/articles/176309.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
transmission loss
low frequency range
natural vibration mode
diffuse field incidence
Opis:
This paper presents an approximate analytical model for estimating the transmission loss (TL) of a finite rectangular plate in the low frequency range, which is based on the modal summation approach (MSA) taking into account the modal radiation impedance and fluid loading. The mode-dependent radiation resistance is calculated using the Rayleigh integral. The fluid loading is taken into account through the natural frequency modified by the added mass. The results are compared with the ones of Statistical Energy Analysis (SEA) coupled with FEM and FEM coupled with BEM. In addition, the effects of the various vibration modes and the fluid loading on TL, and a way for reducing the calculation time are discussed.
Źródło:
Archives of Acoustics; 2019, 44, 2; 259-265
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Study on the Electrical and Mechanical Characteristics of Ni-30wt%Co and Cu-2wt%Be Alloy for Development of Semiconductor Test Probe Pin
Autorzy:
Park, Jin-Young
Kim, Young-Choon
Kim, Jae-Gyun
Powiązania:
https://bibliotekanauki.pl/articles/353264.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
probe pin
Be-Cu Alloy
Ni-Co Alloy
test socket
mechanical properties
electrical properties
Opis:
Ultra-precision testing is a very important procedure to secure the reliability of the products as well as for the technology development in the areas of semiconductor and display. Accordingly, companies manufacturing equipment for testing of semiconductor and display have been continuously executing researches for the improvement of the performances of test sockets used in test equipment. Through this study, characteristics of the materials in accordance with the mechanical and electrical properties of Ni-30wt%Co alloy and newly developed Cu-2wt%Be alloy were analyzed in order to select the probe pin material of the socket, which is a key component used in the semiconductor testing equipment. In addition, finite element interpretation was executed by using Ansys Workbench 14.0 to comparatively analyze the finite element interpretation results and experimental results. Experiment was executed for the mechanical properties including tensile strength, elasticity modulus, specific heat, thermal expansion coefficient and Contact Force, for electrical properties, experiment on surface resistance, specific resistance and electrical conductivity was executed to measure the properties. It was confirmed that the results of finite element interpretation and experiment displayed similar trend and it is deemed that the Contact Force value was superior for Be-Co alloy. Through this study, it was confirmed that the newly developed Be-Co alloy is more appropriate as probe pin material used as the core component of test socket used in the semiconductor testing equipment than the existing Ni-Co alloy.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 943-947
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dual Speed Laser Remelting for High Densification in H13 Tool Steel Metal 3D Printing
Autorzy:
Jung, Im Doo
Choe, Jungho
Yun, Jaecheol
Yang, Sangsun
Yang, Dong-Yeol
Kim, Yong-Jin
Yu, Ji-Hun
Powiązania:
https://bibliotekanauki.pl/articles/353737.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metal 3d printing
powder bed fusion
selective laser melting
H13 tool steel
remelting
Opis:
The densification behavior of H13 tool steel powder by dual speed laser scanning strategy have been characterized for selective laser melting process, one of powder bed fusion based metal 3d printing. Under limited given laser power, the laser re-melting increases the relative density and hardness of H13 tool steel with closing pores. The single melt-pool analysis shows that the pores are located on top area of melt pool when the scanning speed is over 400 mm/s while the low scanning speed of 200 mm/s generates pores beneath the melt pool in the form of keyhole mode with the high energy input from the laser. With the second laser scanning, the pores on top area of melt pools are efficiently closed with proper dual combination of scan speed. However pores located beneath the melt pools could not be removed by second laser scanning. When each layer of 3d printing are re-melted, the relative density and hardness are improved for most dual combination of scanning. Among the scan speed combination, the 600 mm/s by 400 mm/s leads to the highest relative density, 99.94% with hardness of 53.5 HRC. This densification characterization with H13 tool steel laser re-melting can be efficiently applied for tool steel component manufacturing via metal 3d printing.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 2; 571-578
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of 4N5 Grade Tantalum Wire from Tantalum Scrap by EBM and Drawing
Autorzy:
Yu, Ji-Won
Choi, Sang-Hoon
Sim, Jae-Jin
Lim, Jae-Hong
Seo, Kyoung-Deok
Hyun, Soong-Keon
Kim, Tae-Youb
Gu, Bon-Woo
Park, Kyoung-Tae
Powiązania:
https://bibliotekanauki.pl/articles/353005.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electron beam melting
drawing
tantalum scrap
recycling
high purity
Opis:
Electron beam melting(EBM) is a useful technique to obtain high-purity metal ingots. It is also used for melting refractory metals such as tantalum, which require melting techniques employing a high-energy heat source. Drawing is a method which is used to convert the ingot into a wire shape. The required thickness of the wire is achieved by drawing the ingot from a drawing die with a hole of similar size. This process is used to achieve high purity tantalum springs, which are an essential component of lithography lamp in semiconductor manufacturing process. Moreover, high-purity tantalum is used in other applications such as sputtering targets for semiconductors. Studies related to recycling of tantalum from these components have not been carried outuntil now. The recycling of tantalum is vital for environmental and economic reasons. In order to obtain high-purity tantalum ingot, in this study impurities contained in the scrap were removed by electron beam melting after pre-treatment using aqua regia. The purity of the ingot was then analyzed to be more than 4N5 (99.995%). Subsequently, drawing was performed using the rod melted by electron beam melting. Owing to continuous drawing, the diameter of the tantalum wire decreased to 0.5 mm from 9 mm. The hardness and oxygen concentration of the tantalum ingot were 149 Hv and less than 300 ppm, respectively, whereas the hardness of the tantalum wire was 232.12 Hv. In conclusion, 4N5 grade tantalum wire was successfully fabricated from tantalum scrap by EBM and drawing techniques. Furthermore, procedure to successfully recycle Tantalum from scraps was established.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 935-941
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving Sound Transmission Through Triple-Panel Structure Using Porous Material and Sonic Crystal
Autorzy:
Kim, Myong-Jin
Powiązania:
https://bibliotekanauki.pl/articles/177186.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
sound transmission loss
sonic crystal
triple-panel structure
sound insulation
Opis:
Main aim of this study is to combine the characteristics of the sonic crystal (SC) with acoustic panels and porous materials to improve the sound transmission loss (STL) through the triple-panel structure. SCs cause a bandgap centered around a certain frequency (Bragg’s frequency) due to generation of destructive interference. Initially, an analytical method is developed that extends the previous theory of double-panel structure to predict STL through a triple-panel structure. Finite element (FE) simulations are performer to obtain the STL through the triple-panel, which are validated with the analytical predictions. Various configurations are analyzed using the FE method based on the method of inserting the porous material and SCs between the panels to address the combined effect. STL through the triple-panel structure is compared with that through the double-panel structure having the same total weight and total thickness. It is found that the combined structure of the triple panel and the SC with glass wool as filler gives the best soundproof performance for the same external dimensions. For narrow air gaps, filing with glass wool is more advantageous than inserting one row of SC. In addition, the triple panel combined with a SC has better soundproofing than the two-panel counterparts.
Źródło:
Archives of Acoustics; 2019, 44, 3; 533-541
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Carbon Content on Austenite Stability and Strain-induced Transformation of Nanocrystalline FeNiC Alloy by Spark Plasma Sintering
Autorzy:
Oh, Seung-Jin
Kim, Byoung-Cheol
Suh, Man-Chul
Shon, In-Jin
Lee, Seok-Jae
Powiązania:
https://bibliotekanauki.pl/articles/355534.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FeNiC alloy
austenite stability
strain-induced transformation
spark plasma sintering
Opis:
The effects of carbon content on the austenite stability and strain-induced transformation of nanocrystalline Fe-11%Ni alloys were investigated using X-ray analysis and mechanical tests. The nanocrystalline FeNiC alloy samples were rapidly fabricated using spark plasma sintering because of the extremely short densification time, which not only helped attain the theoretical density value but also prevented grain growth. The increased austenite stability resulted from nanosized crystallites in the sintered alloys. Increasing compressive deformation increased the volume fraction of strain-induced martensite from austenite decomposition. The kinetics of the strain-induced martensite formation were evaluated using an empirical equation considering the austenite stability factor. As the carbon content increased, the austenite stability was enhanced, contributing to not only a higher volume fraction of austenite after sintering, but also to the suppression of its strain-induced martensite transformation.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 863-867
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Structure and Magnetic Properties of Intermetallic Cu-Ni Alloy Nanopowders Synthesized by the Electrical Explosion of Wire
Autorzy:
Nguyen, Minh-Thuyet
Kim, Jin-Chun
Powiązania:
https://bibliotekanauki.pl/articles/352297.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cu-Ni alloy
nanoparticle
phase structure
magnetism
explosion of wire
Opis:
Cu-Ni composite nanoparticles were successfully synthesized by electrical explosion of wire (EEW) method. Cu-Ni alloy and twisted wires with various Ni contents were used as the feeding material for a 3 kV charging voltage EEW machine in an ethanol ambient chamber. The phase structure and magnetic properties of the as-fabricated samples were studied. It was established that the prepared powders after drying have a spherical form with the particle size is under 100 nm. XRD analysis indicated that the nanopowders consisted of binary Cu-Ni phases. Only pure phases of the intermetallic compound Cu-Ni (Cu0.81Ni0.19 and Cu3.8Ni) were observed in the XRD patterns of the samples. The synthesized intermetallic Cu-Ni alloy nanopowders reveal magnetic behaviors, however, the lower Ni content samples exhibited paramagnetic behaviors, meanwhile, the higher Ni content samples exposed ferromagnetic properties.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 893-898
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of Pure Ti Implants Fabricated by Additive Manufacturing
Autorzy:
Kim, Dong-Jin
Kim, Hyung-Giun
Kim, Ji-Sun
Song, Kuk-Hyun
Powiązania:
https://bibliotekanauki.pl/articles/354362.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pure Ti
selected laser melting
heat input
microstructure
mechanical property
Opis:
This study was carried out to evaluate the aspect of microstructure and mechanical property development on additive manufactured pure Ti at elevated heat-input. For this work, pure Ti powder (commercial purity, grade 1) was selected, and selective laser melting was conducted from 0.5 to 1.4 J/mm. As a result, increase in heat-input led to the significant grain growth form 4 μm to 12 μm, accompanying with the change of grain shape, correctly widmanstätten structured grains. In addition, Vickers microhardness was notably increased from 228 Hv to 358 Hv in accordance with elevated heat-input, which was attributed to the increased concentration of oxygen and nitrogen mainly occurred during selected laser melting process.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 959-962
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies