Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, D.-W." wg kryterium: Autor


Tytuł:
Solvent Extraction of Co, Ni and Mn from NCM Sulfate Leaching Solution of Li(NCM)O2 Secondary Battery Scraps
Autorzy:
Hong, H. S.
Kim, D. W.
Choi, H. L.
Ryu, S.-S.
Powiązania:
https://bibliotekanauki.pl/articles/355577.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
waste recycling
NCM-system lithium ion battery
reduction
leaching
Opis:
As a part of the study on recycling Li(NCM)O2 lithium-ion battery scraps, solvent extraction experiments were performed using different extraction agents such as PC88A, Cyanex272 and D2EHPA to separate Co, Ni and Mn from the leaching solution. When the ratio of Mn to Ni was about 0.4 in the leaching solution, the separation factor for Co and Mn was found to be less than 10 so that the separation of Co and Ni was insufficient. When solvent extraction was done using the solution with the lower Mn/Ni ratio of 0.05 where Mn was removed by potassium permanganate and chlorine dioxide, more than 99% of Mn could be extracted through five courses of extraction using 30vol% D2EHPA while the extraction rates of Co and Ni were around 17% and 11%, respectively. In the case that Mn was removed from the solution, the extraction rate of Co was higher than 99% whereas less than 7% Ni was extracted using Cyanex272 suggesting that Co and Ni elements were effectively separated.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1011-1014
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of pier contact accident in busan new port of south Korea by System-Theoretic Accident Model and Processes (STAMP)
Autorzy:
Kim, S. R.
Wamugi, W. J.
Camliyurt, G.
Kim, D. W.
Park, Y. S.
Powiązania:
https://bibliotekanauki.pl/articles/24201437.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
maritime accidents
investigation on maritime accidents
accident analysis
System-Theoretic Accident Model and Process
maritime safety
safety at sea
pilotage
lesson
Opis:
Marine accidents are caused by complex and diverse causes. Therefore, it is necessary to analyse accidents from the perspective of the whole system rather than the existing analysis models that focus on cause-effect. The STAMP analysis is a constraint-based model that focuses on improper management or enforcement of safety-related constraints in system operation. Thus, as a case study of the application of the STAMP technique in marine accident analysis, the Milano Bridge pier contact accident that occurred on April 6, 2020 in Busan New Port of South Korea was analysed by the STAMP technique in this study. Through this study, it was proposed to break away from the domestic accident investigation, which focused only on the punishment of the ship operator, and to suggest improvements that enable organizations related to the marine accidents to take initiative to take efforts for safety.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2023, 17, 2; 299--304
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Nickel Powders by Reduction of Nickel Hydroxide Using the Taylor Fluid Flow
Autorzy:
Park, I.-J.
Kim, D.-W.
Kim, G.-H.
Chae, H.-J.
Jung, H.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355021.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni(OH)2
nickel
Taylor fluid flow
fine powder
Opis:
In this study, Ni(OH)2 was synthesized by the continuous reaction by the Taylor fluid flow and compared with those prepared from the conventional batch type reaction. The nickel powders were synthesized by reduction of Ni(OH)2 in an aqueous solution with hydrazine hydrate acting as the reductant. And then the characteristics of the nickel powder according to the synthesis method were compared. The average particle size of the synthesized Ni(OH)2 using Taylor reactor was generally decreased about 1.5~2.5 times more than the batch reaction. The nickel powders prepared by the batch reaction highly agglomerated with non-uniform particles. In the Taylor reaction, the agglomeration of particles was broken and uniform nickel powder was produced.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1443-1447
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study On The Separation And Extraction Of Rare-Earth Elements From The Phosphor Recovered From End Of Life Fluorescent Lamps
Badanie separacji i ekstrakcji metali ziem rzadkich z fosforu ze zużytych świetlówek
Autorzy:
Shin, D.-W.
Kim, J. G.
Powiązania:
https://bibliotekanauki.pl/articles/351714.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
recycle
yttrium
phosphor
end of life
recykling
itr
fosfor
świetlówki
Opis:
In this study, recovered phosphor from end of life three-wavelength fluorescent lamp was selected for reuse rare earth elements in the phosphor. The effect of a type of acid, concentration, and time was investigated as solubility of rare earth elements. In addition, precipitate heat-treated was investigated as possibility of reusable phosphor. The results showed that the amount of the rare earth elements was different values depending on the type of acid, and it was investigated with concentration of acid and reaction time. After precipitation reaction, the precipitate was sintered in electric furnace in order to reuse rare earth elements as phosphor. It was confirmed that yttrium, europium, oxygen, and carbon through X-ray diffraction and inductively coupled plasma analysis. Following the results, it can assume that rare earth oxide reuse the phosphor as three-wavelength fluorescent lamp.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1257-1260
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecule dissociation at the Fe3O4 (001) surface
Autorzy:
Kim-Ngan, N.-T. H.
Jagło, D.
Sitko, D.
Soszka, W.
Powiązania:
https://bibliotekanauki.pl/articles/411955.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Magnetite surface
low energy ion scattering
molecule dissociation
Opis:
The molecular dissociation at the single-crystalline Fe3O4 (001) surface has been investigated using the diatomic H+2 , D+2 and N+2 molecules in the energy range of 3�{8 keV and in the temperature range of 90 K�{300 K. The single collision of ions released from dissociation with the surface atoms was observed only for the N2+ molecules. The detail analysis confirmed that for the light molecules such as H2+ and D2+ the charge-transfer process dominate the interaction of a molecule with the magnetite surface. A large change in the scattered ion yields around the Verwey phase transition temperature was observed indicating a strong correlation between the molecule dissociation and the electronic state of the magnetite surface.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 2; 1-10
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Grain Boundary Morphologies on Stress Corrosion Cracking of Alloy 600
Autorzy:
Kim, H. P.
Choi, M. J.
Kim, S. W.
Kim, D. J.
Lim, Y. S.
Hwang, S. S.
Powiązania:
https://bibliotekanauki.pl/articles/352569.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
alloy 600
NaOH
stress corrosion cracking
grain boundary morphologies
Opis:
Effects of grain boundary morphologies on stress corrosion cracking (SCC) of Alloy 600 have been studied in 40% NaOH at 315°C using C-ring specimens. The configuration of the grain boundary and the intergranular carbide density were controlled by heat treatment. SCC tests were performed at +150 mV above the corrosion potential. The specimen with a serrated grain boundary showed higher SCC resistance than that with a straight grain boundary. This appears to be caused by the fact that the specimen with the serrated grain boundary has longer SCC path. SCC resistance also increased with intergranular carbide density probably due to enhanced relaxation of stress at intergranular carbide.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1415-1419
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Similarity of chromosome structure among Populus tremula var. davidiana, Populus alba and their hybrids revealed by FISH karyotype analysis
Autorzy:
Kim, Y.G.
Kwon, S.H.
Kang, H.I.
Yoem, D.B.
Kim, K.W.
Kim, H.H.
Kang, K.S.
Powiązania:
https://bibliotekanauki.pl/articles/2077655.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Karyotype analysis
Fluorescence in situ hybridization
Ribosomal DNA site
Poplar
Cytogenetics
Opis:
The genus Populus is one of the important tree species in Korean peninsula and many other coun- tries in the world. It represents the model species of forest genomics because it grows fast and reproduces rapidly. In this reason, their genetic characteristics have been well studied and the whole genome has been sequenced completely in some species. However, cytogenetic study of the genus Populus has been limited. In the present study, karyotypes of Korean aspen (P. tremula var. davidiana), Silver poplar (P. alba) and their two hybrids, Suwon aspen (P. tremula var. glandulosa) and Hyun aspen (P. alba × P. tremula var. glandulsa) were analyzed by means of the fluorescence in situ hybridization (FISH). Root samples were collected from mature trees in the demonstration forest, located at Suwon, Kyonggi province in South Korea. The fresh root cells were examined by DAPI (4’,6-diamidino-2-phenylindole) staining and FISH using 45S rDNA and 5S rDNA probes. As the results, the chromosome compositions of all species were the same as 2n = 38. The karyotype formulas of Korean aspen, Silver poplar, Suwon aspen and Hyun aspen were 28m + 6sm + 4st (2sat), 26m + 10sm (2sat) + 2st, 26m + 12sm (2sat) and 28m + 10sm (2sat), respectively. The four species had one pair of 45S rDNA site and one pair of 5S rDNA site in common with FISH karyotypes. The similarity of FISH karyotypes among four species indicated close genetic relationship and coexistence of their interspecific hybrids. This research will provide genetic information on cytogenetic research of Populus and genetic mapping that can be applied to the breeding program of Populus in the near future.
Źródło:
Dendrobiology; 2020, 83; 68-74
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Investigations of Selected Materials by Low-Energy Ion Scattering Technique
Autorzy:
Goc-Jagło, D.
Sitko, D.
Jagło, G.
Kim-Ngan, N.-T. H.
Soszka, W.
Powiązania:
https://bibliotekanauki.pl/articles/2047339.pdf
Data publikacji:
2007-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.35.Rh
71.20.Be
71.20.Eh
77.80.Bh
Opis:
Surfaces of three selected materials were investigated by means of low-energy ion-scattering technique: (1) the magnetite (Fe$\text{}_{3}$O$\text{}_{4}$) exhibiting the so-called Verwey transition (T$\text{}_{V}$(bulk)=125 K) accompanied by a small cubic-monoclinic crystal distortion, (2) the intermetallic compound NdMn$\text{}_{2}$ undergoing an antiferromagnetic-paramagnetic phase transition (T$\text{}_{N}$=104 K) accompanied by a large crystal distortion with a volume change of 1%, and (3) the typical insulator BaTiO$\text{}_{3}$ with two structural transitions below 300 K. The primary energy of the (Ne$\text{}^{+}$, Ar$\text{}^{+}$) ion beam was in the range of 4-8 keV, and the low-energy ion-scattering spectra were collected in the temperature range of 85-300 K. A large influence from the Verwey transition on the neutralization and re-ionization of scattered ions from magnetite surface was observed, while no visible change at the magnetic phase transition in NdMn$\text{}_{2}$ was revealed in the low-energy ion-scattering spectra. A strong dependence of the characteristics of the low-energy ion-scattering spectra on the irradiated time was observed for BaTiO$\text{}_{3}$ indicating that this surface was heavily charged by ion bombardments.
Źródło:
Acta Physica Polonica A; 2007, 111, 5; 763-771
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects Of Environmental Factors On The Dispersion Behavior Of Iron Oxide In Aqueous Solutions With Poly Acrylic Acid
Wpływ parametrów charakteryzujących wodne roztwory poli(kwasu akrylowego) na dyspersję tlenku żelaza
Autorzy:
Lee, E.-H.
Kim, K.-M.
Maeng, W.-Y.
Hur, D.-H.
Powiązania:
https://bibliotekanauki.pl/articles/354513.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
polyacrylic acid
dispersion stability
magnetite
nanoparticles
suspension
poli(kwas akrylowy)
stabilność dyspersji
magnetyt
nanocząstki
zawiesina
Opis:
After preparing aqueous suspensions from magnetite particles with a poly-acrylic acid, we investigated the effects of several experimental parameters. We characterized the stability of the suspensions using visual inspection, sedimentation, adsorption, and thermal stability of the dispersant. The dispersion stability is affected by the solution pH, the concentrations of magnetite particles, the molecular weight, the concentration of the dispersants, and the temperature. The stability of the suspensions increased as the concentration of the dispersant and the temperature increased. In terms of the molecular weights of the dispersant, the suspensions with dispersant of low-molecular weight (1800) were more stable than those of high-molecular weight (250000) at room temperature. However, at high temperature the suspensions with high-molecular weight showed stability. The adsorption efficiency of the dispersant was very low. The dispersant of high-molecular weight showed a higher thermal integrity than that of low-molecular weight. From this work, we obtained the optimum conditions for stable aqueous suspensions of magnetite particles.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1561-1564
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of DyMn Alloy-Powder Addition On Microstructure And Magnetic Properties Of NdFeB Sintered Magnets
Wpływ dodatku proszku DyMn na mikrostrukturę i właściwości magnetyczne spiekanych magnesów NdFeB
Autorzy:
Lee, M.-W.
Dhakal, D. R.
Kim, T. H.
Lee, S. R.
Kim, H. J.
Jang, T. S.
Powiązania:
https://bibliotekanauki.pl/articles/357010.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nd-Fe-B sintered magnets
DyMn-alloy powder
coercivity
low melting point element
magnesy spiekane
proszek DyMn
koercja
elementy o niskiej temperaturze topnienia
Opis:
Micostructural change and corresponding effect on coercivity of a NdFeB sintered magnet mixed with small amount of DyMn powder was investigated. In the sintered magnet mixed with the DyMn alloy-powder Dy-rich shell was formed at outer layer of the main grains, while Mn was mostly concentrated at Nd-rich triple junction phase (TJP), lowering melting temperature of the Nd-rich phase that eventually improved the microstructural characteristics of the gain boundary phase. The coercivity of a magnet increased more than 3.5 kOe by the mixing of the DyMn alloy-powder.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1407-1409
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies