Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kalemba-Rec, I." wg kryterium: Autor


Wyświetlanie 1-8 z 8
Tytuł:
Investigations of friction stir welds between 5083 and 7075 aluminum alloys using EBSD and X-ray techniques
Autorzy:
Kalemba-Rec, I.
Wróbel, M.
Kopyściański, M.
Powiązania:
https://bibliotekanauki.pl/articles/1113685.pdf
Data publikacji:
2016-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.20.Vj
81.40.-z
81.40.Ef
Opis:
Microstructure and texture of the friction stir welded 5083 and 7075 aluminum alloys were characterized by means of the electron backscatter diffraction and X-ray techniques. A complex vortex-like microstructure with distinctive bands of the both joint materials was found in the centre of the weld. The alternating bands filled roughly equiaxed dynamically recrystallized grain volumes. The grain size was slightly smaller in bands of the alloy 7075 than in bands of the alloy 5083. Grains in the thermomechanically affected zone were elongated, especially on the retreating side of the weld (7075 alloy). On the other hand, the grain shape in the heat affected zone was similar to that for the base material.
Źródło:
Acta Physica Polonica A; 2016, 130, 4; 996-999
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Manufacturing, Microstructure and Corrosion Resistance of Electrophoretically Deposited SiO2 and Ni/SiO2 Coatings On X2CrNiMo17–12–2 Steel
Autorzy:
Ratajski, T.
Kalemba-Rec, I.
Dubiel, B.
Powiązania:
https://bibliotekanauki.pl/articles/352531.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrophoretic deposition (EPD)
SiO2 coatings
nancomposite Ni/SiO2 coatings
Opis:
The SiO2 and Ni/SiO2 coatings were electrophoretically deposited on X2CrNiMo17-12-2 steel using ethanol-based suspensions of the SiO2 and Ni powders. The influence of the zeta potential and concentration of the suspensions, the applied voltage and deposition time on the quality of the coatings was studied. Microstructure of the plan-view and cross sections of the coatings was investigated using scanning electron microscopy. The plan-view images revealed the uniform microstructure of the coatings with sporadically observed cracks, pores as well SiO2 and Ni agglomerates. On the cross-sections, the Cr2O3 layer, resulted from oxidation of the substrate during sintering of the coatings was observed. The polarization tests have shown that SiO2 and Ni/SiO2 coatings improve the corrosion resistance of the X2CrNiMo17-12-2 steel in 3.5% NaCl aqueous solution.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2B; 1221-1227
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of PAA on the Microstructure and Corrosion Resistance of Electrophoretically Deposited SiO2 and Ni/SiO2 Coatings on X2CrNiMo17-12-2 Steel
Autorzy:
Ratajski, T.
Kalemba-Rec, I.
Dubiel, B.
Powiązania:
https://bibliotekanauki.pl/articles/353252.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrophoretic deposition (EPD)
electrosteric stabilization
SiO2 coatings
nanocomposite Ni/SiO2 coatings
PAA
Opis:
The effect of anionic surfactant in the form of polyacrylic acid (PAA) on the electrophoretic deposition of the SiO2 and Ni/SiO2 coatings on X2CrNiMo17-12-2 stainless steel was examined. Parameters of the process, such as chemical composition of the suspensions, voltage between the electrodes and the deposition time were experimentally selected. Zeta potential measurements showed a beneficial effect of polyacrylic acid on the SiO2 and Ni particles stability in ethanol. Scanning and transmission electron microscopy studies revealed that the microstructure of the coatings obtained from the suspensions containing polyelectrolyte is more homogenous and has less amount of desiccation cracks on the surface. The results of the polarization tests have shown that addition of anionic surfactant improves also corrosion resistance of the coatings in 3.5% NaCl solution.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 2073-2079
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical electron microscopy investigation of topologically close-packed phases in CMSX-4 single crystal superalloy
Autorzy:
Dubiel, B.
Indyka, P.
Kalemba-Rec, I.
Moskalewicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/1154000.pdf
Data publikacji:
2016-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.66.Dk
68.37.Hk
68.37.Lp
68.37.Ma
82.80.Ej
61.05.J-
Opis:
In this work the topologically close-packed phases precipitated during annealing of CMSX-4 single-crystal superalloy at temperature 1100°C were investigated. Microstructural analyses were carried out by means of scanning- and transmission electron microscopy as well as scanning-transmission electron microscopy in high angle annular dark field mode. Chemical composition in nanoareas was determined using energy dispersive X-ray spectroscopy. Scanning electron microscopy investigation has shown that the topologically close-packed precipitates were formed already after 50 h of annealing at temperature 1000°C. With prolongation of the annealing time up to 2500 h the change of the morphology of topologically close-packed particles from blocky to needle-like occurred. Selected area electron diffraction analysis indicated that the topologically close-packed precipitates are the orthorhombic P phase. Quantitative energy dispersive X-ray spectroscopy analysis revealed that the topologically close-packed precipitates are enriched mostly in Re and W.
Źródło:
Acta Physica Polonica A; 2016, 130, 4; 1110-1113
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical Electron Microscopy Studies of the CMSX-4 Single Crystal Superalloy Subjected to High Temperature Annealing
Autorzy:
Dubiel, B.
Indyka, P.
Kalemba-Rec, I.
Moskalewicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/1033055.pdf
Data publikacji:
2017-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.66.Dk
68.37.Hk
68.37.Lp
68.37.Ma
82.80.Ej
Opis:
The aim of the present work is to investigate the development of the γ/γ' microstructure and the changes in chemical composition of γ and γ' phases during high temperature annealing of CMSX-4 superalloy at a temperature of 1100°C in the time range from 500 to 2500 h. The studies were performed by means of scanning electron microscopy and the modern scanning-transmission electron microscopy with Super-X EDS system of four SDD detectors. Results of scanning electron microscopy and scanning-transmission electron microscopy analyses have shown that the microstructure of CMSX-4 superalloy is unstable during ageing at high temperature and the coalescence of cuboidal γ' precipitates was observed. Energy dispersive X-ray microanalysis revealed the distribution of particular alloying elements in the γ and γ' phases and the differences in their concentration in the function of the annealing time.
Źródło:
Acta Physica Polonica A; 2017, 131, 5; 1375-1378
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Characterization of 309 and 310 Steel after the Corrosion in Wood Biomass Ash
Autorzy:
Dębowska, A.
Kopia, A.
Kalemba-Rec, I.
Petrzak, P.
Magdziarz, A.
Powiązania:
https://bibliotekanauki.pl/articles/1032929.pdf
Data publikacji:
2017-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.66.Dk
61.05.cp
68.37.Hk
88.20.dd
Opis:
The aim of this study was to investigate the influence of biomass ashes - specifically wood biomass ash - on the surface of austenitic stainless steel 309 and 310. The process was carried out for 1000 h at 650°C. The microstructure and chemical composition of corrosion products were examined by scanning electron microscopy with energy dispersive spectroscopy analysis. Phase analysis of corrosion product were done by X-ray diffraction and ash composition was investigated by X-ray fluorescence. It was observed that wood biomass ash caused the corrosion of the steel surface. On the surface of the steels exposed to wood biomass ash the layer of corrosion products was observed, mostly chromium, nickel and iron oxide. The thickness of mill scale formed during the process was in the range of h=15-30 μm.
Źródło:
Acta Physica Polonica A; 2017, 131, 5; 1387-1389
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of oxide layers made on aluminum alloy 7075 by different methods
Charakterystyka warstw tlenkowych wytworzonych na stopie aluminium 7075 z zastosowaniem różnych metod
Autorzy:
Jędrusik, M.
Dębowska, A.
Kopia, A.
Petrzak, P.
Koclęga, D.
Kalemba-Rec, I.
Powiązania:
https://bibliotekanauki.pl/articles/263954.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
oxide layers
aluminum alloy 7075
micro-arc oxidation
phosphate coating
chemical method
warstwy tlenkowe
stop aluminium 7075
MAO
fosforanowanie
metoda chemiczna
Opis:
Aluminum and aluminum alloys are now being widely used as materials for structural applications due to a number of valuable properties. Improvement in the functional and decorative properties of aluminum can be obtained by forming an oxide layer on its surface. The aim of the present study was to produce and compare the properties of oxide layers on the surface of aluminum alloy 7075 and compare their properties. The methods that were used during the study were as follows: phosphating, micro-arc oxidation, and a chemical method involving the formation of a passive layer. The layers were subjected to corrosion tests. SEM and EDS methods were used for characterization of the received results. Also, some tests on an optical profilometer were done. It was proven that the micro-arc oxidation method allowed us to obtain a layer with the greatest thickness and highest corrosion resistance.
Glin i jego stopy są obecnie powszechnie wykorzystywanym materiałem do zastosowań konstrukcyjnych ze względu stosunek masy do wytrzymałości. Poprawę własności funkcyjnych i dekoracyjnych aluminium uzyskać można przez wytworzenie warstwy tlenku na jego powierzchni. Celem badań było wytworzenie warstw tlenkowych na podłożu ze stopu aluminium 7075 i porównanie ich właściwości. Zastosowano trzy metody: fosforanowanie, micro-arc oxidation oraz metodę chemiczną polegającą na wytworzeniu warstwy pasywnej. Otrzymane powłoki poddano testom korozyjnym oraz charakteryzowano z zastosowaniem następujących metod: SEM, EDS. Wykonano też badania na profilometrze optycznym. Metoda micro-arc oxidation pozwala na uzyskanie warstwy o największej grubości oraz najlepszej odporności na korozję.
Źródło:
Metallurgy and Foundry Engineering; 2016, 42, 3; 187-193
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Low Deformation Asymmetric Rolling on Microstructure and Texture of the Polycrystalline Copper
Autorzy:
Uniwersał, A.
Wróbel, M.
Wroński, S.
Kalemba-Rec, I.
Wroński, M.
Wierzbanowski, K.
Baczmański, A.
Bacroix, B.
Powiązania:
https://bibliotekanauki.pl/articles/353907.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
asymmetric rolling
polycrystalline copper
microstructure refinement
strip curvature
Opis:
In the most recent years the asymmetric rolling (AR) attracts attention of researchers and technologists. This process can improve some technological parameters (e.g. modification of rolling torque and load, power requirements, etc.) as well as provide the possibility of grain refinement in a relatively inexpensive way. Most of the reports concerning microstructural changes produced by AR refer to high deformations imposed in highly asymmetric conditions. However, such rolling conditions are difficult to control, so there are no prospects to their quick industrial implementation. The present paper refers to relatively low deformation and low asymmetry rate, that is much more interesting for the industry. It was shown that bending of the rolled band (important disadvantage of the AR technology) can be controlled by adjusting of the amount of deformation and asymmetry. It was also shown that ca. 30% reduction in thickness during cold rolling, together with a relatively low asymmetry, reduces significantly the grain size and produces a more fragmented microstructure inside grains of the polycrystalline copper comparing to the symmetric rolling (SR). The material hardness after AR is higher than after the SR. Moreover, the crystallographic texture asymmetry, expressed by its rotation around the transverse direction, is observed in the AR material.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 4; 2183-2188
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies