Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kai, Wang" wg kryterium: Autor


Wyświetlanie 1-13 z 13
Tytuł:
Preparation of MCM-41 Supported Benzene Sulphonic Acid, a Catalyst for the Synthesis of CL-20 from TAIW
Autorzy:
Chen, Shixiong
Yang, Chaofei
Qian, Hua
Liu, Dabin
Kai, Wang
Li, Rui
Powiązania:
https://bibliotekanauki.pl/articles/358326.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
CL-20
catalytic
MCM-41
benzene sulphonic acid
TAIW
Opis:
Pure MCM-41 anchored benzene sulphonic acid (BSA/MCM-41), an efficient heterogeneous catalyst, was prepared for the synthesis of CL-20 from TAIW. The prepared catalysts were fully characterized by FTIR, XRD, TEM, TG, N2 adsorption techniques, elemental analysis and acidity tests. It was observed that the catalyst (BSA/MCM-41) retained the mesoporous structure like MCM-41, exhibited excellent thermal stability and high activity. Compared with a blank, the high catalytic activity promoted shorter reaction times by a factor of 3/5. In addition, this catalyst could be reused at least five times without significant loss of its catalytic potential. Moreover, the BSA/MCM-41 catalyst exhibited an optimal catalytic performance, with a high to excellent yield of CL-20 (92.5%) with a purity of 98.3%, under the optimum synthesis conditions.
Źródło:
Central European Journal of Energetic Materials; 2019, 16, 3; 343-359
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process machining allowance for reliability analysis of mechanical parts based on hidden quality loss
Autorzy:
Wang, Jingang
Liu, Xintian
Xu, Wang
Kai, Jin
Powiązania:
https://bibliotekanauki.pl/articles/28086953.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
reliability analysis
Process machining allowance
hidden quality loss
process capability index
Opis:
The machining allowance variation is significant for the reliability of a part during the machining process. Usually, when the machining allowance of a part increases, the machining and production cost also increase. When the machining allowance decreases, the machining surface will have defects. The parts will produce manyscraps andreliability will decrease. The machining allowance of a part consists of multiple process machining allowances. To analyze the impact caused by machining allowance variation, the hidden quality loss and process machining allowance are combined through theprocess capability index (PCI). Then the asymmetric quadratic quality loss function (AQF) and quadratic exponential function (QEF) are used to analyze them. A prediction model of hidden quality loss of process machining allowance is proposed. On the premise that the quality characteristic value obeys normal function distribution, a numerical model is given and used to obtain process machining allowance-inherent reliability of the product. The actual case is used to compare and verify the two models.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 4; art. no. 171594
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Attapulgite suspension filter material for biological aerated filter to remove CODMn and ammonia nitrogen in micropolluted drinking water source
Autorzy:
Xu, Kai
Wang, Jiahao
Li, Jiacheng
Wang, Zijie
Lin, Zizeng
Wang, Zheng
Powiązania:
https://bibliotekanauki.pl/articles/2032905.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
drinking water
biofiltration
BAF
biological aerated filter
COVID-19
removal of ammonia
human stool
woda pitna
biofiltracja
biologiczny filtr napowietrzny
usuwanie amoniaku
kał ludzki
Opis:
An attapulgite suspended (AS) filter material was successfully prepared and used in combination with biological aerated filter (BAF) to pretreat excess organic matter and ammonia nitrogen in micropolluted water. The AS filter material was of low density and floated on the water surface, which is beneficial to optimize the hydraulic conditions. Through scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) It was found that the surface of the filter material was uneven, the pores were deep. When the hydraulic load is 4 m/h and the gas to water volume ratio is 2:1, the removal rates of permanganate index (CODMn) and ammonia nitrogen by ASBAF are up to 57.49 and 88.11%, respectively, and the effluent quality meets relevant standards. After backwashing, the pollutants removal rate will return to stable filtration after two hours. A short-term shutdown of the reactor has little effect on the processing performance of ASBAF, but a long-term shutdown will greatly affect the removal rate of CODMn. The complete organic matter degradation model can well fit the experimental effluent water quality.
Źródło:
Environment Protection Engineering; 2020, 46, 4; 21-40
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bidirectional DC–AC Converter-Based Communication Solution for Microgrid
Autorzy:
Zhang, Yixuan
Ni, Kai
Wang, Yangang
Hu, Yihua
Powiązania:
https://bibliotekanauki.pl/articles/1193849.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bidirectional DC-AC converter
frequency shift keying
MATLAB simulation
microgrid
two-way communication
Opis:
The communication system of a microgrid can transfer the information of electricity price, power consumption and so on between users and the control centre. This capability is of great significance to improve the efficiency and sustainability of power facilities. In this paper, a bidirectional DC–AC converter topology is proposed to achieve the composite transmission of power and signals in microgrids. Since the transmitted signals are modulated by power switches of converters and integrated into the currents, the cost of signal couplers can be saved and the circuit structure can be simplified. In order to verify the feasibility of the proposed method, a simulation model of the proposed converter is implemented in MATLAB/Simulink. With the power supply frequency of 50 Hz, when the converter operates in the inverter mode and rectifier mode, the data transmission rate can reach 120 bit/s and 48 bit/s, respectively.
Źródło:
Power Electronics and Drives; 2020, 5, 40; 177-188
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Forced motion CFD simulation and load refinement evaluation of floating vertical-axis tidal current turbines
Autorzy:
Zhang, Wanchao
Zhou, Yujie
Wang, Kai
Zhou, Xiaoguo
Powiązania:
https://bibliotekanauki.pl/articles/1573876.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
vertical-axis tidal current turbine
hydrodynamic loads
pitching motion
added mass
damping coefficients
Opis:
Simulation of the hydrodynamic performance of a floating current turbine in a combined wave and flow environment is important. In this paper, ANSYS-CFX software is used to analyse the hydrodynamic performance of a vertical-axis turbine with various influence factors such as tip speed ratio, pitching frequency and amplitude. Time-varying curves for thrust and lateral forces are fitted with the least squares method; the added mass and damping coefficients are refined to analyse the influence of the former factors. The simulation results demonstrate that, compared with nonpitching and rotating turbines under constant inflow, the time-varying load of rotating turbines with pitching exhibits an additional fluctuation. The pitching motion of the turbine has a positive effect on the power output. The fluctuation amplitudes of thrust and lateral force envelope curves have a positive correlation with the frequency and amplitude of the pitching motion and tip speed ratio, which is harmful to the turbine’s structural strength. The mean values of the forces are slightly affected by pitching frequencies and amplitudes, but positively proportional to the tip speed ratio of the turbine. Based upon the least squares method, the thrust and lateral force coefficients can be divided into three components, uniform load coefficient, added mass and damping coefficients, the middle one being significantly smaller than the other two. Damping force plays a more important role in the fluctuation of loads induced by pitching motion. These results can facilitate study of the motion response of floating vertical-axis tidal current turbine systems in waves.
Źródło:
Polish Maritime Research; 2020, 3; 40-49
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Welding Heat Input on Microstructure and Corrosion Characterization in CGHAZ of X80 Pipeline Steel
Autorzy:
Wang, Xue-Mei
Zhao, Wei
Chen, Kai
Li, Zhen
Powiązania:
https://bibliotekanauki.pl/articles/28099607.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
X80 pipeline steel
coarse grain heat-affected zone
heat input
corrosion
Opis:
The coarse-grained heat-affected zone specimens of X80 pipeline steel were produced by welding thermal simulation under different heat inputs of 10, 30, and 55 kJ/cm to study the effects of heat input on microstructure evolution and corrosion characterization. The corrosion resistance of coarse-grained heat-affected zones was poorer than that of base metal due to less homogenous in the former. For 10 kJ/cm coarse-grained heat-affected zone, the corrosion resistance was poorer than the others due to the more adsorption hydrogen around the needle-like martensite/austenite constituents and greater galvanic driving force between the needle-like martensite/austenite constituents and ferrite. In carbonate/bicarbonate solution, better corrosion resistance for coarse-grained heat-affected zones was obtained when the heat input is 30 kJ/cm, which can be attributed to the severe coarse martensite/austenite constituents for 55 kJ/cm coarse-grained heat-affected zone. In the H2S environment, the better corrosion resistance for coarse-grained heat-affected zone was obtained when the heat input is 55 kJ/cm, which can be attributed to the protective effect of corrosion products. In addition, the high content of M/A constituents for 30 kJ/cm CGHAZ was good for hydrogen adsorption, which was adverse to the corrosion resistance in acid environments.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 2; 659--671
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A sampling method based on improved firefly algorithm for profile measurement of aviation engine blade
Autorzy:
Huang, Zhi
Zhao, Liao
Li, Kai
Wang, Hongyan
Zhou, Tao
Powiązania:
https://bibliotekanauki.pl/articles/221479.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aviation engine blade
coordinate measurement machine
profile measurement
improved firefly algorithm
Opis:
Coordinate Measurement Machines (CMMs) have been extensively used in inspecting mechanical parts with higher accuracy. In order to enhance the efficiency and precision of the measurement of aviation engine blades, a sampling method of profile measurement of aviation engine blade based on the firefly algorithm is researched. Then, by comparing with the equal arc-length sampling algorithm (EAS) and the equi-parametric sampling algorithm (EPS) in one simulation, the proposed sampling algorithm shows its better sampling quality than the other two algorithms. Finally, the effectiveness of the algorithm is verified by an experimental example of blade profile. Both simulated and experimental results show that the method proposed in this paper can ensure the measurement accuracy by measuring a smaller number of points.
Źródło:
Metrology and Measurement Systems; 2019, 26, 4; 757-771
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nitrogen-doped Carbon Catalyst by Ultrasonic for Electrocatalytic CO2 Reduction
Autorzy:
Liu, Jianfeng
Wang, Ting
Zhang, Zhenhai
Ning, Kai
Yin, Shibin
Yuan, Binxia
Powiązania:
https://bibliotekanauki.pl/articles/780079.pdf
Data publikacji:
2020
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Nitrogen-doped
Catalyst
Ultrasonic
CO2 Reduction
Opis:
The electrocatalytic reduction of carbon dioxide into valued chemicals such as formic acid has the most promising potential in applying renewable energy for useful materials and mitigating the greenhouse effect. However, the studies still focus on developing catalysts with low price and high catalytic properties. In this study, nitrogen atoms were decorated into carbon structure by a unique ultrasonic method, then the nitrogen-doped carbon material was applied as catalyst in CO2 reduction, it exhibited excellent electrochemical activity, 4 times higher than the normal method. The improved activity should be attributed to the interaction between nitrogen and carbon atoms through analysis.
Źródło:
Polish Journal of Chemical Technology; 2020, 22, 3; 24-28
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel process for extraction of iron from a refractory red mud
Autorzy:
Ding, Wei
Xiao, Junhui
Peng, Yang
Shen, Siyue
Chen, Tao
Zou, Kai
Wang, Zhen
Powiązania:
https://bibliotekanauki.pl/articles/1450194.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
red mud
sodium sulfate
segregation roasting
magnetic separation
iron recovery
Opis:
Red mud is a kind of solid waste produced during alumina extraction from bauxite. To extraction valuable iron from red mud, the technology of adding sodium sulfate-segregation roasting-magnetic separation to treat red mud was developed. During the paper, the effects of various process parameters on the extraction of iron by segregation roasting-magnetic separation were studied, and the phase transformation behavior and microstructure of iron are explored. Repeated test results showed that magnetic concentrate (mass percent), TFe of 80.29 % and overall iron recovery of 92.08 %was obtained. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) results indicated that after the segregation roasting, the hematite was transformed into a new metal phase consisting mainly of metallic iron and magnetite. The addition of sodium sulfate during the segregation roasting can obviously improve the efficiency of segregation roasting-magnetic separation for iron extraction.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 6; 125-136
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Oxygen Reduction Activity of Nitrogen-doped Graphene
Autorzy:
Jian-feng, Liu
Ge, Sun
Ting, Wang
Kai, Ning
Bin-xia, Yuan
Wei-guo, Pan
Powiązania:
https://bibliotekanauki.pl/articles/2174819.pdf
Data publikacji:
2022
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Nitrogen Doping
Graphene
Oxygen Reduction Activity
Molecular Simulation
Opis:
Graphite nitrogen, pyridine nitrogen and pyrrole nitrogen are the main nitrogen types in nitrogen-doped graphene materials. In order to investigate the mechanism of the oxygen reduction activity of nitrogen-doped graphene, several models of nitrogen-doped graphene with different nitrogen contents and different nitrogen types are developed. The nitrogen content is varied from 1.3 at% to 7.8 at%, and the adsorption energy is calculated according to the established models, then the band gaps are analyzed through the optimization results, so as to compare the mag-nitude of the conductivity. Finally, the oxygen reduction activity of graphite nitrogen-doped graphene (GNG) is found to be better than pyridine nitrogen-doped graphene (PDNG) and pyrrole nitrogen-doped graphene (PLNG) when the nitrogen content is lower than 2.6 at%, and the oxygen reduction activity of PDNG is the best when the nitrogen content was higher than 2.6 at%.
Źródło:
Polish Journal of Chemical Technology; 2022, 24, 3; 29--34
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of simultaneous recovering of Au and Ag from CTs by chloridizing volatilization methods
Autorzy:
Weiwei, Wang
Zhengyao, Li
Shanshan, Yang
Kai, Ma
Xin, Gao
Shaoqi, Han
Shaochun, Hou
Hecheng, Miao
Powiązania:
https://bibliotekanauki.pl/articles/27323663.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cyanide tailings
chloridizing volatilization
gold
silver
kinetics
Opis:
Cyanide Tailings (CTs) are known as hazardous resources that accumulate hundreds of millions of tons, threatening the ecological environment. This work proposes an eco-friendly and efficient way to recover gold and silver from CTs. The effects of calcium chloride dosage, silicon dioxide dosage, pellet moisture content, roasting temperature, and roasting time on Au and Ag chloridizing volatilization were studied. The kinetics of simultaneously recovering of gold and silver from cyanide Tailings by chlorination roasting was investigated. It was determined that the chloridizing volatilization rates increased with increasing calcium chloride dosage, temperature and decreasing silicon dioxide dosage, pellet moisture content. The chloridizing volatilization kinetics followed a shrinking core model, with inter-diffusion through gangue layer as the rate determining step. This finding is in accordance with the apparent activation energy (Ea) of 24.01 kJ•mol-1 (Au) and 24.62 kJ•mol-1 (Ag). The orders of reaction with respect to moisture content, temperature, calcium chloride dosage and silicon dioxide dosage were also achieved. The rate of reaction based on diffusion-controlled process can be expressed by semi-empirical equations. The control steps of the gold and silver recovery process were investigated by the kinetic study, which provided theoretical guidance for the optimization of the method.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 172522
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of High-Temperature Annealing on the Cross-Tension Property of Resistance Spot Welded Medium-Mn Steel
Autorzy:
Zhao, Bingge
Wang, Yuanfang
Sun, Chenyu
Ding, Kai
Wu, Guanzhi
Wei, Tao
Pan, Hua
Gao, Yulai
Powiązania:
https://bibliotekanauki.pl/articles/2174565.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
medium Mn steel
resistance spot welding
cross-tension strength
martensite
fracture
Opis:
As one of the most promising 3rd generation advanced high strength steels (AHSS), medium Mn steels attract much attention because of their exceptional mechanical property and reasonable cost. However, their application in the modern automotive industry is limited by poor weldability. In this study, 7Mn steel was welded by resistance spot welding (RSW), which was followed by high-temperature annealing to increase the cross-tension property. With this effort, enhanced cross-tension strength (CTS) with a partial interfacial fracture (PIF) mode was realized. During the annealing after RSW that produced martensite, austenitization was realized and then evolved into martensite by the following air cooling. This process produced structure homogeneity across the joint. With respect to the RSW joint, martensite remained the dominant structure after annealing while the diffusion of C and Mn solutes was triggered. With the increase of annealing temperature, the diffusion was enhanced, and the grain boundary embrittlement was reduced, leading to higher CTS.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 4; 1293--1298
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-13 z 13

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies