Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jang, H. S." wg kryterium: Autor


Wyświetlanie 1-10 z 10
Tytuł:
Self-Consolidation and Surface Modification of Mechanical Alloyed Ti-25.0 at.% Al Powder Mixture by Using an Electro-Discharge Technique
Autorzy:
Chang, S. Y.
Jang, H. S.
Yoon, Y. H.
Kim, Y. H.
Kim, J. Y.
Lee, Y. K.
Lee, W. H.
Powiązania:
https://bibliotekanauki.pl/articles/354212.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sintering
mechanical alloying
powder consolidation
intermetallic compounds
titanium aluminides
Opis:
Electrical discharges using a capacitance of 450 μF at 0.5, 1.0, and 1.5 kJ input energies were applied in a N2 atmosphere to obtain the mechanical alloyed Ti3Al powder without applying any external pressure. A solid bulk of nanostructured Ti3Al was obtained as short as 160 μsec by the Electrical discharge. At the same time, the surface has been modified into the form of Ti and Al nitrides due to the diffusion process of nitrogen to the surface. The input energy was found to be the most important parameter to affect the formation of a solid core and surface chemistry of the compact.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1293-1297
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aluminum Oxide Formation On Fecral Catalyst Support By Electro-Chemical Coating
Powstawanie tlenku glinu na nośniku katalizatora FeCrAl przez osadzanie elektrochemiczne
Autorzy:
Yang, H. S.
Jang, D. H.
Lee, K. J.
Powiązania:
https://bibliotekanauki.pl/articles/355942.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FeCrAl
catalyst support
aluminum oxide formation
PEO
plasma electrolytic oxidation
electrochemical coating
nośnik katalizatora
tlenek glinu
plazmowe utlenianie elektrolityczne
elektrochemiczne osadzanie
Opis:
FeCrAl is comprised essentially of Fe, Cr, Al and generally considered as metallic substrates for catalyst support because of its advantage in the high-temperature corrosion resistance, high mechanical strength, and ductility. Oxidation film and its adhesion on FeCrAl surface with aluminum are important for catalyst life. Therefore various appropriate surface treatments such as thermal oxidation, Sol, PVD, CVD has studied. In this research, PEO (plasma electrolytic oxidation) process was applied to form the aluminum oxide on FeCrAl surface, and the formed oxide particle according to process conditions such as electric energy and oxidation time were investigated. Microstructure and aluminum oxide particle on FeCrAl surface after PEO process was observed by FE-SEM and EDS with element mapping analysis. The study presents possibility of aluminum oxide formation by electro-chemical coating process without any pretreatment of FeCrAl.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1503-1506
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of 60 kV, 300 A, 3 kHz Pulsed Power Modulator for Wide Applications
Autorzy:
Ryoo, H.
Jang, S.
Goussev, G.
Rim, G.
Powiązania:
https://bibliotekanauki.pl/articles/1807855.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
84.30.Jc
84.30.Ng
84.30.Sk
Opis:
In this paper, a novel pulsed power generator based on IGBT stacks is proposed for wide pulsed power applications. Because it can generate high voltage pulsed output without any step-up transformer or pulse forming network, it has advantages of fast rising time, easiness of pulse width variation, high repetition rate and rectangular pulse shapes. Proposed scheme consists of multiple power stages which were charged parallel from series resonant power inverter. Depending on the number of power stages it can increase maximum voltage up to 60 kV or higher with no limits of power stages. To reduce component for gate power supply, a simple and robust gate drive circuit which delivers gate power and gate signal simultaneously by way of one high voltage cable is proposed. For gating signal and power a full bridge inverter and pulse transformer generates on-off signals of IGBT gating with gate power simultaneously and it has very good characteristics of protection of IGBT switches over arcing condition. It can be used for various kinds of pulse power application such as plasma source ion implantation, sterilization, water and gas treatment which requires few kHz pulse repetition rate with few to ten of microseconds pulse width.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 967-970
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Magnetic Properties of NdFeB Sintered Magnets Diffusion-Treated with Cu/Al Mixed Dyco Alloy-Powder
Autorzy:
Lee, M.-W.
Bae, K.-H.
Lee, S.-R.
Kim, H.-J.
Jang, T.-S.
Powiązania:
https://bibliotekanauki.pl/articles/353351.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nd-Fe-B sintered magnets
grain boundary diffusion process
low melting point element
DyCo alloy-powder diffusion
Opis:
We investigated the microstructural and magnetic property changes of DyCo, Cu + DyCo, and Al + DyCo diffusion-treated NdFeB sintered magnets. The coercivity of all diffusion treated magnet was increased at 880ºC of 1st post annealing(PA), by 6.1 kOe in Cu and 7.0 kOe in Al mixed DyCo coated magnets, whereas this increment was found to be relatively low (3.9 kOe) in the magnet coated with DyCo only. The diffusivity and diffusion depth of Dy were increased in those magnets which were treated with Cu or Al mixed DyCo, mainly due to comparatively easy diffusion path provided by Cu and Al because of their solubility with Ndrich grain boundary phase. The formation of Cu/Al-rich grain boundary phase might have enhanced the diffusivity of Dy-atoms. Moreover, relatively a large number of Dy atoms reached into the magnet and mostly segregated at the interface of Nd2 Fe14 B and grain boundary phases covering Nd2 Fe14 B grains so that the core-shell type structures were developed. The formation of highly anisotropic (Nd, Dy)2Fe14B phase layer, which acted as the shell in the core-shell type structure so as to prevent the reverse domain movement, was the cause of enhancing the coercivity of diffusion treated NdFeB magnets. Segregation of cobalt in Nd-rich TJP followed by the formation of Co-rich phase was beneficial for the coercivity enhancement, resulting in the stabilization of the metastable c-Nd2O3 phase.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1263-1266
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxide Formation In Metal Injection Molding Of 316L Stainless Steel
Tworzenie tlenków podczas wtryskiwania proszku stali nierdzewnej 316L
Autorzy:
Jang, J. M.
Lee, W.
Ko, S.-H.
Han, C.
Choi, H.
Powiązania:
https://bibliotekanauki.pl/articles/351352.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder injection molding
sintering
316L stainless steel
sintering atmosphere
micro parts
wtryskiwanie proszku
spiekanie
stal nierdzewna 316L
mikro-część
Opis:
The effects of sintering condition and powder size on the microstructure of MIMed parts were investigated using water-atomized 316L stainless steel powder. The 316L stainless steel feedstock was injected into micro mold with micro features of various shapes and dimensions. The green parts were debound and pre-sintered at 800°C in hydrogen atmosphere and then sintered at 1300°C and 1350°C in argon atmosphere of 5torr and 760torr, respectively. The oxide particles were formed and distributed homogeneously inside the sample except for the outermost region regardless of sintering condition and powder size. The width of layer without oxide particles are increased with decrease of sintering atmosphere pressure and powder size. The fine oxides act as the obstacle on grain growth and the high sintering temperature causes severe grain growth in micro features due to larger amount of heat gain than that in macro ones.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1281-1285
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of SiC Particles On Sinterability Of Al-Zn-Mg-Cu P/M Alloy
Wpływ cząstek SiC na spiekalność proszku stopowego Al-Zn-Mg-Cu
Autorzy:
Rudianto, H.
Jang, G. J.
Yang, S. S.
Kim, Y. J.
Dlouhy, I.
Powiązania:
https://bibliotekanauki.pl/articles/351304.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metal matrix composites
powder metallurgy
sintering
heat treatment
kompozyty metalowe
metalurgia proszków
spiekanie
obróbka cieplna
Opis:
Premix Al-5.5Zn-2.5Mg-0.5Cu alloy powder was analyzed as matrix in this research. Gas atomized powder Al-9Si with 20% volume fraction of SiC particles was used as reinforcement and added into the alloy with varied concentration. Mix powders were compacted by dual action press with compaction pressure of 700 MPa. High volume fraction of SiC particles gave lower green density due to resistance of SiC particles to plastic deformation during compaction process and resulted voids between particles and this might reduce sinterability of this mix powder. Sintering was carried out under ultra high purity nitrogen gas from 565°-580°C for 1 hour. High content of premix Al-5.5Zn-2.5Mg-0.5Cu alloy powder gave better sintering density and reached up to 98% relative. Void between particles, oxide layer on aluminum powder and lower wettability between matrix and reinforcement particles lead to uncompleted liquid phase sintering, and resulted on lower sintering density and mechanical properties on powder with high content of SiC particles. Mix powder with wt90% of Alumix 431D and wt10% of Al-9Si-vf20SiC powder gave higher tensile strength compare to another mix powder for 270 MPa. From chemical compositions, sintering precipitates might form after sintering such as MgZn2, CuAl2 and Mg2Si. X-ray diffraction, DSC-TGA, and SEM were used to characterize these materials.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1383-1385
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of DyMn Alloy-Powder Addition On Microstructure And Magnetic Properties Of NdFeB Sintered Magnets
Wpływ dodatku proszku DyMn na mikrostrukturę i właściwości magnetyczne spiekanych magnesów NdFeB
Autorzy:
Lee, M.-W.
Dhakal, D. R.
Kim, T. H.
Lee, S. R.
Kim, H. J.
Jang, T. S.
Powiązania:
https://bibliotekanauki.pl/articles/357010.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nd-Fe-B sintered magnets
DyMn-alloy powder
coercivity
low melting point element
magnesy spiekane
proszek DyMn
koercja
elementy o niskiej temperaturze topnienia
Opis:
Micostructural change and corresponding effect on coercivity of a NdFeB sintered magnet mixed with small amount of DyMn powder was investigated. In the sintered magnet mixed with the DyMn alloy-powder Dy-rich shell was formed at outer layer of the main grains, while Mn was mostly concentrated at Nd-rich triple junction phase (TJP), lowering melting temperature of the Nd-rich phase that eventually improved the microstructural characteristics of the gain boundary phase. The coercivity of a magnet increased more than 3.5 kOe by the mixing of the DyMn alloy-powder.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1407-1409
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Point-Contact Spectroscopy of Superconducting $MgCNi_3$ Single Crystals
Autorzy:
Pribulová, Z.
Szabó, P.
Kačmarčík, J.
Samuely, P.
Jang, D.
Lee, H.
Lee, S.
Powiązania:
https://bibliotekanauki.pl/articles/1813611.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.50.+r
Opis:
The first point-contact spectroscopy measurements on $MgCNi_3$ single crystals of very good quality are presented. The measurements have been performed in the temperature range from 1.5 K up to 10 K and at magnetic fields up to 6 T. The superconducting energy gap Δ of the system is found to be scattered between 1 and 1.2 meV which gives the 2Δ/k $T_c$ ratio between BCS weak-coupling value of ~3.5 and a strong coupling of about 4.2. The excess current evaluated in magnetic field indicates the presence of a single energy gap.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 215-218
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of Antireflection Structures as a Protective Layer of Solar Cells with Nanoporous Silica Films and Nanoimprinted Moth-Eye Structure
Autorzy:
Kim, K.
Han, J.
Jang, J.
Choi, C.
Choi, S.
Kim, C.
Kye, H.
Cheong, I.
Powiązania:
https://bibliotekanauki.pl/articles/1492625.pdf
Data publikacji:
2011-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.46.-w
68.37.-d
68.55.-a
78.20.-e
Opis:
The antireflection structures are fabricated by sol-gel process as a protective layer of solar cells and by hot embossing process with anodized aluminum oxide membrane template on polycarbonate film. The optical properties and morphology of the antireflection structures are analyzed by UV-visible spectroscopy and field emission scanning electron microscopy, respectively. The total conversion efficiency of a polycrystalline Si solar cell module with the protective layer, sol-gel-derived nanoporous antireflection structure, is increased by 2.6% and 5.7% for one-side antireflection coated prismatic matt glass and both-side antireflection coated prismatic matt glass, respectively.
Źródło:
Acta Physica Polonica A; 2011, 120, 6A; A-047-A-049
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
AC Microcalorimetry of Superconducting $MgCNi_3$ Single Crystals
Autorzy:
Kačmarčík, J.
Pribulová, Z.
Samuely, P.
Marcenat, C.
Klein, T.
Jang, D.
Lee, H.
Lee, S.
Powiązania:
https://bibliotekanauki.pl/articles/1813689.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.70.Ad
74.25.Bt
Opis:
The low-temperature specific heat of single-crystal samples of superconducting $MgCNi_3$ with typical dimensions 200 μm were measured for the first time. A computer controlled ac microcalorimeter using an optical fiber and an infrared light-emitting diode as the heat source was used down to 2 K at magnetic fields up to 8 T. The specific heat data suggest a moderate coupling in $MgCNi_3$.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 363-366
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies