Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jakubowski, B." wg kryterium: Autor


Tytuł:
Ultrathin oxynitride films for CMOS technology
Autorzy:
Beck, R.B.
Jakubowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/308025.pdf
Data publikacji:
2004
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
MOS technology
gate stack
ultrathin oxynitride layers
high temperature processing
plasma processing
Opis:
In this work, a review of possible methods of oxynitride film formation will be given. These are different combinations of methods applying high-temperature oxidation and nitridation, as well as ion implantation and deposition techniques. The layers obtained using these methods differ, among other aspects in: nitrogen content, its profile across the ultrathin layer,... etc., which have considerable impact on device properties, such as leakage current, channel mobility, device stability and its reliability. Unlike high-temperature processes, which (understood as a single process step) usually do not allow the control of the nitrogen content at the silicon-oxynitride layer interface, different types of deposition techniques allow certain freedom in this respect. However, deposition techniques have been believed for many years not to be suitable for such a responsible task as the formation of gate dielectrics in MOS devices. Nowadays, this belief seems unjustified. On the contrary, these methods often allow the formation of the layers not only with a uniquely high content of nitrogen but also a very unusual nitrogen profile, both at exceptionally low temperatures. This advantage is invaluable in the times of tight restrictions imposed on the thermal budget (especially for high performance devices). Certain specific features of these methods also allow unique solutions in certain technologies (leading to simplifications of the manufacturing process and/or higher performance and reliability), such as dual gate technology for system-on-chip (SOC) manufacturing.
Źródło:
Journal of Telecommunications and Information Technology; 2004, 1; 62-69
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultra-shallow nitrogen plasma implantation for ultra-thin silicon oxynitride (SiOxNy) layer formation
Autorzy:
Bieniek, T.
Beck, R. B.
Jakubowski, A.
Kudła, A.
Powiązania:
https://bibliotekanauki.pl/articles/308830.pdf
Data publikacji:
2005
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
MOS technology
plasma processing
shallow implantation
radiation damage
Opis:
The radiation damage caused by low energy r.f. plasmas has not been, to our knowledge, studied so far in the case of symmetric planar plasma reactors that are usually used for PECVD processes. The reason is that, unlike nonsymmetrical RIE reactors, such geometry prevents, basically, high-energy ion bombardment of the substrate. In this work, we present the results of experiments in which we have studied the influence of plasma processing on the state of silicon surface. Very low temperature plasma oxidation has been used as a test of silicon surface condition. The obtained layers were then carefully measured by spectroscopic ellipsometry, allowing not only the thickness to be determined accurately, but also the layer composition to be evaluated. Different plasma types, namely N2, NH3 and Ar, were used in the first stage of the experiment, allowing oxidation behaviour caused by the exposure to those plasma types to be compared in terms of relative differences. It has been clearly proved that even though the PECVD system is believed to be relatively safe in terms of radiation damage, in the case of very thin layer processing (e.g., ultra-thin oxynitride layers) the effects of radiation damage may considerably affect the kinetics of the process and the properties of the formed layers.
Źródło:
Journal of Telecommunications and Information Technology; 2005, 1; 70-75
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Titanium anodization in ethylene glycol-based electrolytes for surface structurization
Autorzy:
Jastrzębska, A.
Jakubowski, W.
Walkowiak, B.
Powiązania:
https://bibliotekanauki.pl/articles/285166.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
electrolytes
anodization
titanium
Źródło:
Engineering of Biomaterials; 2016, 19, 138; 83
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of leachate recirculation on biogas production in a landfill bioreactor
Autorzy:
Białowiec, A.
Siudak, M.
Jakubowski, B.
Wiśniewski, D.
Powiązania:
https://bibliotekanauki.pl/articles/206977.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bioreactor
municipal waste
biogas production
produkcja biogazu
odpady komunalne
bioreaktor
Opis:
The technology of municipal solid waste treatment in a landfill bioreactor is based on a system of controlled, enhanced fermentation of organic waste, which occurs in a heap having status of bioreactor. The enhancement of biogas production is done by leachate recirculation. In a landfill bioreactor, located in Kosiny Bartosowe, Poland, with capacity of 70 000 Mg of municipal solid waste, the research aiming on the determination of the influence of leachate recirculation on biogas generation was done. Experiments were done in two periods: just one month after bioreactor sealing with hydraulic loading rate (HLR) of 2 mm/d, and one year after bioreactor sealing with HLR of 3 mm/d. Doubling of biogas production from about 100 to 200 m3/h and the increase of methane content from 60 to 65% has been determined when 2 mm/d of HLR of leachate recirculation was applied. The implementation of HLR on the level 3 mm/d increased biogas production from 148 to 270 m3/d, and methane content from 62 to 64%. Leachate recirculation improved thermal conditions in bioreactor to typical meso-philic values.
Źródło:
Environment Protection Engineering; 2017, 43, 1; 113-120
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of annealing (900?C) of ultra-thin PECVD silicon oxynitride layers
Autorzy:
Mroczyński, R.
Głuszko, G.
Beck, R. B.
Jakubowski, A.
Ćwil, M.
Konarski, P.
Hoffman, P.
Schmeißer, D.
Powiązania:
https://bibliotekanauki.pl/articles/308691.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
ultra-thin dielectrics
silicon oxynitride
PECVD
CMOS
Opis:
This work reports on changes in the properties of ultra-thin PECVD silicon oxynitride layers after high- temperature treatment. Possible changes in the structure, composition and electrophysical properties were investigated by means of spectroscopic ellipsometry, XPS, SIMS and electrical characterization methods (C-V, I-V and charge- pumping). The XPS measurements show that SiOxNy is the dominant phase in the ultra-thin layer and high-temperature annealing results in further increase of the oxynitride phase up to 70% of the whole layer. Despite comparable thickness, SIMS measurement indicates a densification of the annealed layer, because sputtering time is increased. It suggests complex changes of physical and chemical properties of the investigated layers taking place during high-temperature annealing. The C-V curves of annealed layers exhibit less frequency dispersion, their leakage and charge-pumping currents are lower when compared to those of as-deposited layers, proving improvement in the gate structure trapping properties due to the annealing process.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 3; 16-19
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Szacowanie niezawodności systemu nawigacyjnego w kontekście przetwarzania informacji nawigacyjnej
Estimating the reliability of the navigation system in the context of the processing of navigational information
Autorzy:
Jakubowski, B.
Załęska-Fornal, A.
Powiązania:
https://bibliotekanauki.pl/articles/222536.pdf
Data publikacji:
2004
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
systemy nawigacyjne
GPS
informacje nawigacyjne
navigation system
navigation information
Opis:
W pracy przedstawiono obliczenia wartości wskaźników niezawodnościowych obiektu odnawialnego, jakim jest zintegrowany system nawigacyjny INS/GPS. Wyliczono przewidywaną zdolność do realizacji nakładanych zadań w określonych warunkach i określonym przedziale czasowym. Oszacowano oczekiwany czas zdatności systemu do pracy w kontekście przetworzonej informacji nawigacyjnej z symulatora WelNawigate GS720.
The paper presents calculations of renewable object reliability indicator, such as the integrated INS/GPS system. Predicted capability of carrying out tasks set under specific conditions and in specific time was calculated. Expected time of system ability to work was estimated with regard to the processed navigation data from WelNavigate GS720.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2004, R. 45 nr 1 (156), 1 (156); 23-38
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synteza przekształtnikowego układu sterowania autonomicznym generatorem indukcyjnym. Część II – badania symulacyjne
Synthesis of the converter control system of autonomous induction generator. Part II - simulation studies
Autorzy:
Jakubowski, B.
Pieńkowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/1811926.pdf
Data publikacji:
2012
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
autonomiczny generator indukcyjny
sterowanie polowo zorientowane
badania symulacyjne
Opis:
In the paper the results of simulation studies of a converter control of the autonomous induction generator are presented. The results of investigations in case of loading the generator with active and reactive power and in case of changes of the angular speed of the shaft of the generator are considered. The paper presents the plots and vector diagrams of selected variables of the system for different working states of the generator. The simulation results confirm the assumptions used for the synthesis of the control system of an autonomous induction generator, shown in the part I of the article.
Źródło:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały; 2012, 66, 32; 85-91
1733-0718
Pojawia się w:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synteza przekształtnikowego układu sterowania autonomicznym generatorem indukcyjnym. Część I – analiza
Synthesis of the converter control system of autonomous induction generator. Part I - analysis
Autorzy:
Jakubowski, B.
Pieńkowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/1811917.pdf
Data publikacji:
2012
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
generator indukcyjny
układ przekształtnikowy
sterowanie polowo zorientowane
dobór nastaw regulatorów
Opis:
In the paper the algorithm and control method of converter system of autonomous induction generator are presented. The mathematical model of the system was given. The methods of tuning of inverter current controllers in the AC side circuits, the generator voltage controller and the voltage controller in DC link voltage of converter are described. The system enables dynamic control of voltage at the stator terminals of an induction generator with various types of loads of the generator. The simulation results of the studies are presented in the second part of this article.
Źródło:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały; 2012, 66, 32; 77-84
1733-0718
Pojawia się w:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterowanie autonomicznym generatorem indukcyjnym ze wzbudzeniem przekształtnikowym
Control of isolated induction generator with converter excitation
Autorzy:
Jakubowski, B.
Pieńkowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/1372852.pdf
Data publikacji:
2010
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
generator indukcyjny
sterowanie przekształtnikowe
sterowanie wektorowe
Opis:
The paper presents the problems of control of isolated self-excited induction generator used to operate under variable speed. The systems of three-phase isolated induction generator with excitation from a three-phase PWM inverter with a single capacitor on the DC side are presented. The use of a static PWM inverter for controlling of induction generator excitation gives a better transient response and a smooth variation of excitation current. The systems of PWM excitations with PWM inverter placed in series or shunt with induction generator and hybrid system are presented. The vector control methods of self-excited induction generator are developed and discussed. The control schemes based on generator magnetic field orientation are presented. The direct and indirect control based on rotor flux orientation and control based on direct stator flux orientation are described. The stator flux oriented vector control requires decoupling blocks in the control circuits. Some selected results of simulation of control performance are presented.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2010, 88; 123-128
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stanowisko mamuta – Mammuthus primigenius (Blumenbach, 1799) w górnym plejstocenie Kopalni Węgla Brunatnego Bełchatów
Mammuthus primigenius (Blumenbach, 1799) fromUpper Pleistocene deposits of the Be³chatów Coal Mine
Autorzy:
Błażejowski, B.
Jakubowski, G.
Gieszcz, P.
Kowalski, R.
Hołda-Michalska, A.
Powiązania:
https://bibliotekanauki.pl/articles/2075107.pdf
Data publikacji:
2014
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
mamut włochaty
izotopy stabilne w zębach
Bełchatów
woolly mammoth
stable isotope composition of teeth
Opis:
The fossil remains of juvenile woolly mammoth (Mammuthus primigenius) from Pleistocene deposits of the Be³chatów coal mine are described. Precise measurements of the excavated bones allowed for approximate reconstruction of the specimen, which turned out to be in the estimated age of 10 years. Serial samples for isotope analysis of carbon and oxygen were taken from a tooth, and the isotope record has revealed a probable change of diet due to switching from milk-based to plant-based food.
Źródło:
Przegląd Geologiczny; 2014, 62, 11; 755--760
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relation between the content of simple sugars in a potato tuber and its resistance to mechanical load
Zależność między zawartością cukrów prostych w bulwie ziemniaka a jej wytrzymałością na obciążenia mechaniczne
Autorzy:
Jakubowski, T.
Marks, N.
Maciewicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/956446.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
potato
sugar
damage
ziemniak
cukier
uszkodzenie
Opis:
The objective of the paper was to find a relation of the content of simple sugars in a potato tuber and its resistance to mechanical loads. The following potato tuber varieties were investigated: Kuras, Gala, Agata, Ditta, Arrow, Roko and Raja. A force damaging periderm, external and internal damages ratios and mass damages determined potato tubers susceptibility to mechanical damages. Measurement of the sugar content in the potato tubers was carried out with a refractometer. A statistically significant relation, measured with the value of the coefficient of correlation, between the content of simple sugars and susceptibility to internal damages was determined only in potato tubers of Kuras and Raja varieties.
W pracy poszukiwano zależności między zawartością cukrów prostych w bulwie ziemniaka a jej wytrzymałością na obciążenia mechaniczne. Badano bulwy ziemniaka odmian: Kuras, Gala, Agata, Ditta, Arrow, Roko i Raja. Wyznacznikiem podatności bulwy ziemniaka na uszkodzenia mechaniczne były: siła uszkadzająca perydermę, wskaźniki uszkodzeń zewnętrznych i wewnętrznych oraz uszkodzeń masowych. Pomiar zawartości cukru w bulwie ziemniaka wykonano przy użyciu refraktometru. Statystycznie istotną zależność, mierzoną wartością współczynnika korelacji, między zawartością cukrów prostych a podatnością na uszkodzenia wewnętrzne stwierdzono wyłącznie w bulwach ziemniaka odmian Kuras i Raja.
Źródło:
Agricultural Engineering; 2015, 19, 1; 67-76
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Podatność modyfikowanych powłok SiO2 na zasiedlenie przez bakterie
The susceptibility of modified SiO2 coatings to bacterial colonization
Autorzy:
Porębska, K.
Jakubowski, W.
Sobczyk-Guzenda, A.
Pietrzyk, B.
Powiązania:
https://bibliotekanauki.pl/articles/284750.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
powłoki SiO2
zol-żel
domieszkowanie Zn
powłoki antybakteryjne
powłoki hydrofobowe
SiO2 coating
sol-gel
Zn doping
anti-bacterial coatings
hydrophobic coatings
Opis:
Zasiedlanie przez bakterie powierzchni różnych materiałów może być zarówno źródłem infekcji jak również stanowić przeszkodę dla prawidłowego funkcjonowania niektórych konstrukcji i urządzeń biomedycznych. Wytwarzanie powłok antybakteryjnych może być skuteczną metodą zabezpieczania powierzchni przed ich kolonizacją przez bakterie. W niniejszej pracy modyfikowane powłoki SiO2 wytwarzano metodą zol-żel na podłożach szklanych i stalowych. Zole przygotowano na bazie tetraetoxysilanu (TEOS), modyfikując ich właściwości za pomocą methyltrimethoxysilanu (MTMS) i domieszki azotanu cynku. Właściwości antybakteryjne powłok sprawdzono poprzez zbadanie ich podatności na kolonizację przez bakterie Escherichia coli. Stwierdzono, że dodatek antybakteryjny w postaci azotanu cynku ogranicza podatność na zasiedlanie bakterii a hydrofobowość nie ma zasadniczego wpływu na poziom zasiedlenia bakterii E.coli.
Colonization of surfaces of materials by bacteria can be a source of infection, as well as an obstacle for the proper functioning of some of the biomedical equipment. Preparation of anti-bacterial coating may be an effective method of protecting of the surface prior to colonization by the bacteria. In this paper, modified SiO2 coating have been prepared by the sol-gel method on glass and stainless steel substrates. As the precursor of sols tetraethoxysilan (TEOS) was used. The properties of sols were modified using additives of methyltrimethoxysilan (MTMS) and zinc nitrate. Antibacterial properties of coatings were determined by examining of their susceptibility to colonization by the bacteria Escherichia coli. It was found that the addition of zinc nitrate reduces the risk of bacterial colonization and hydrophobicity is not essential to the level of E. coli colonization.
Źródło:
Engineering of Biomaterials; 2014, 17, no. 128-129; 67-71
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niezawodność systemu nawigacyjnego w kontekście przetwarzania informacji nawigacyjnej
Reliability of the navigation system in the context of the processing of navigational information
Autorzy:
Felski, A.
Jakubowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/222534.pdf
Data publikacji:
2004
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
systemy nawigacyjne
GPS
jednostki pływające
navigation system
craft
Opis:
W pracy przedstawiono koncepcję oceny niezawodności systemu nawigacyjnego w kontekście przetwarzania informacji nawigacyjnej. Opracowano niezbędne teoretyczne informacje dotyczące opisu zjawiska oceny niezawodności systemu informacyjnego, jakim jest układ integrujący czujniki INS i GPS. W dalszej części artykułu sporządzono model niezawodnościowy układu INS/GPS w oparciu o oszacowane błędy pozycji jednostki pływającej. Do przeprowadzenia oceny modelu wykorzystano dane z symulatora nawigacyjnego WelNavigate GS720. Zrobiono analizę statystyczną rozważanego procesu niezbędną do wyznaczenia wskaźników niezawodnościowych badanego układu.
The paper presents a concept of navigation system reliability evaluation related to navigation data processing. It comprises all the necessary theoretical data related to the description of an information system reliability such as a system that integrates sensors in INS and GPS. Further in the paper shown is a reliability model of the INS/GPS system based on estimated errors for a floating vessel. Data from WelNavigate GS720 simulator were used to carry out the evaluation of the model. Statistic analysis was conducted of the process considered necessary to determine reliability indicators for the system investigated.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2004, R. 45 nr 1 (156), 1 (156); 5-22
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multivariate linear regression and CART regression analysis of TBM performance at Abu Hamour phase - I tunnel
Analiza wskaźników wydajności drążenia tarczami TBM dla tunelu Abu Hamour - etap I, z zastosowaniem wielorakiej regresji liniowej i regresji CART
Autorzy:
Jakubowski, J.
Stypulkowski, J. B.
Bernardeau, F. G.
Powiązania:
https://bibliotekanauki.pl/articles/219814.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
EPB TBM
wydajność TBM
prędkość drążenia
polowy wskaźnik drążenia
drzewa CART
uczenie maszyn
regresja wieloraka
TBM performance
field penetration index
CART trees
machine learning
multivariate regression
Opis:
The first phase of the Abu Hamour drainage and storm tunnel was completed in early 2017. The 9.5 km long, 3.7 m diameter tunnel was excavated with two Earth Pressure Balance (EPB) Tunnel Boring Machines from Herrenknecht. TBM operation processes were monitored and recorded by Data Acquisition and Evaluation System. The authors coupled collected TBM drive data with available information on rock mass properties, cleansed, completed with secondary variables and aggregated by weeks and shifts. Correlations and descriptive statistics charts were examined. Multivariate Linear Regression and CART regression tree models linking TBM penetration rate (PR), penetration per revolution (PPR) and field penetration index (FPI) with TBM operational and geotechnical characteristics were performed for the conditions of the weak/soft rock of Doha. Both regression methods are interpretable and the data were screened with different computational approaches allowing enriched insight. The primary goal of the analysis was to investigate empirical relations between multiple explanatory and responding variables, to search for best subsets of explanatory variables and to evaluate the strength of linear and non-linear relations. For each of the penetration indices, a predictive model coupling both regression methods was built and validated. The resultant models appeared to be stronger than constituent ones and indicated an opportunity for more accurate and robust TBM performance predictions.
Pierwszy etap budowy systemu odpływowego Abu Hamour został ukończony na początku roku 2017. Tunel o długości 9,5 km i średnicy 3,7 m przeprowadzono z zastosowaniem dwóch maszyn drążących z równoważeniem ciśnienia gruntu (EPB TBM), wyprodukowanych przez Herrenknechta. Przebieg pracy maszyn TBM był monitorowany i zapisywany przez automatyczny system zbierania danych. Autorzy połączyli te dane z dostępnymi informacjami o właściwościach masywu skalnego, oczyścili dane, uzupełnili zmiennymi wtórnymi oraz zagregowali tygodniami i zmianami roboczymi. Zbadano korelacje i statystyki opisowe. Metodami liniowej regresji wielorakiej i regresji CART zbudowano modele łączące wskaźniki wydajności drążenia (PR, PPR, FPI) z ich charakterystykami operacyjnymi oraz charakterystykami geotechnicznymi słabego masywu skalnego rejonu Doha, w którym prowadzono tunel. Obydwie zastosowane metody regresji dają interpretowalne modele oraz stosują odmienne algorytmy obliczeniowe, co pozwala na wzbogacenie wyników. Głównym celem analizy było znalezienie możliwie najlepszych podzbiorów zmiennych objaśniających oraz ocena siły znalezionych związków liniowych i nieliniowych. Dla każdego wskaźnika wydajności zbudowano też model predykcyjny wykorzystujący obydwie metody regresji. Zbudowane w ten sposób modele wynikowe okazały się silniejsze od modeli składowych. To wskazuje drogę możliwej poprawy dokładności i stabilności przewidywań wskaźników wydajności TBM.
Źródło:
Archives of Mining Sciences; 2017, 62, 4; 825-841
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda i projektowanie badań typu Integrated-Hierarchical Information Integration na potrzeby wyceny atrybutów jakościowych usługi transportowej
Method and design of an Integrated-Hierarchical Information Integration study for transport service quality features’ valuation
Autorzy:
Wolański, M.
Jakubowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/192509.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
transport service quality
passengers preferences
Integrated–Hierarchical Information Integration modeling method
jakość usług przewozowych
preferencje pasażerów
metoda Integrated-Hierarchical Information Integration
Opis:
Przedmiotem artykułu jest opis metody Integrated- Hierarchical Information Integration (I-HII). Jest to jedyne podejście pozwalające na skuteczne uwzględnienie kilkunastu różnych atrybutów jakościowych w modelu wyboru środka transportu. W artykule opisano także rezultaty przeprowadzonego przez autorów badania, dotyczącego agregowania atrybutów jakościowych, zrealizowanego w celu zaprojektowania scenariuszy wywiadów I-HII. Metoda I-HII polega na modelowaniu wyboru za pomocą danych uzyskanych w wyniku eksperymentów, dotyczących deklarowanych preferencji (stated choice), przy czym poszczególne atrybuty jakościowe są grupowane (agregowane). W pojedynczym wywiadzie jedna grupa atrybutów prezentowana jest w sposób rozagregowany, pozostałe zaś – w sposób zagregowany. W ten sposób omija się ograniczenia percepcji respondentów, jakie występują przy jednoczesnym zaprezentowaniu kilkunastu atrybutów jakościowych. Wybór atrybutów oraz sposób ich pogrupowania nie powinien mieć charakteru arbitralnie narzuconego przez badaczy, lecz powinien wynikać z analizy powiązań identyfikowanych przez respondentów. Stąd też należy je ustalać empirycznie w sposób indywidualny dla każdego projektu. Na potrzeby niniejszego badania zostały przeprowadzone w pociągach SKM Trójmiasto (próba 265 respondentów, wywiady CAPI). W ich wyniku wstępną listę 34 atrybutów jakościowych zawężono do trzech grup najważniejszych jakości cząstkowych, liczących po trzy bądź cztery atrybuty. Są nimi: informacja o rozkładzie jazdy (w tym: informacja o rozkładzie na peronach, informacja o rozkładzie w Internecie, zapowiedzi / wyświetlacze pokazujące opóźnienia i zakłócenia), czas przejazdu oraz jego stałość (czas przejazdu, częstotliwość, niezawodność, punktualność) oraz czystość i komfort (czystość wewnętrzna pociągu, dostępność miejsc w pociągu, wygodne siedzenia) oraz dodatkowo cena.
The paper describes an Integrated–Hierarchical Information Integration (I–HII) modeling method. This is the only approach, effectively allowing to include over a dozen different quality attributes in a transport mode choice model. The paper includes also results of the authors’ own research on aggregating quality attributes, conducted in order to design I–HII interview scenarios. The I–HII method bases on stated choice modeling input data, whereas different quality attributes are grouped (aggregated). In a single choice situation one group of attributes is presented in a disaggregated way, and all the other groups – in an aggregated form. This allows to overcome interviewees’ perception limits that occur, when over a dozen of quality attributes is presented at one time. The quality attributes’ choice and grouping shouldn’t be done arbitrarily by researches, but should result from interviewees’ perception. Therefore it should be determined for each research project empirically. For the research 265 interviewees in the SKM Trójmiasto trains have been conducted. This helped to limit the initial list of 34 quality attributes to three groups of three-four attributes. Price should be a separate stand-alone attribute.
Źródło:
Transport Miejski i Regionalny; 2014, 3; 16-22
1732-5153
Pojawia się w:
Transport Miejski i Regionalny
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies