Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Hong, S." wg kryterium: Autor


Tytuł:
Interface Engineering in Heteroepitaxy
Autorzy:
Hong, S. K.
Chen, Y.
Ko, H. J.
Yao, T.
Powiązania:
https://bibliotekanauki.pl/articles/2035571.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.35.-p
68.35.Dv
81.15.-z
81.15.Hi
81.10.Aj
Opis:
We report the importance of interface engineering in heteroepitaxy with examples of plasma-assisted molecular beam epitaxial ZnO growths on (0001) sapphire substrates and on (0001) GaN/sapphire templates, whose interfaces are engineered to improve and to control properties of ZnO films. The growth of rocksalt structure MgO buffer on Al$\text{}_{2}$O$\text{}_{3}$ (0001) is developed for ZnO epitaxy. By employing the MgO buffer layer, the formation of 30$\text{}^{o}$ rotated mixed domains is prohibited and two-dimensional layer-by-layer growth of ZnO on sapphire substrate is achieved. High-resolution X-ray diffraction reveals the superior improvement in a crystal quality of ZnO films with an MgO buffer. Polarity of wurtzite structure ZnO films on Ga-polar GaN/sapphire templates is controlled by changing interface structures. By forming a single crystalline, monoclinic Ga$\text{}_{2}$O$\text{}_{3}$ interfacial layer between GaN and ZnO through O-plasma pre-exposure on the Ga-polar GaN surface, O-polar ZnO films are grown. By forming the ZnO/GaN heterointerface without an interfacial layer through the Zn pre-exposure on the Ga-polar GaN surface, Zn-polar ZnO films are grown.
Źródło:
Acta Physica Polonica A; 2002, 102, 4-5; 541-554
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experiments on wave motion and suspended sediment concentration at Nang Hai, Can Gio mangrove forest, Southern Vietnam
Autorzy:
Hong Phuoc, V.L.
Massel, S.R.
Powiązania:
https://bibliotekanauki.pl/articles/47937.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
subtropical zone
marine environment
trophodynamic process
Vietnam
mangrove forest
biogeochemical process
concentration
Can Gio area
wave motion
suspended sediment
Opis:
Biogeochemical and trophodynamic processes as well as hydrodynamic factors play a major role in the structure and function of mangrove ecosystems. This study outlines field experiments on wave motion and suspended sediment concentration carried out at Nang Hai, Can Gio mangrove forest, Southern Vietnam. Pressure sensors were used to measure sea surface elevation, and Optical Backscatter Sensors (OBS) were applied to detect infrared (IR) radiation scattered from suspended particles in order to measure turbidity and suspended sediment concentrations. The experimental results indicate that most of the energy is dissipated inside the mangrove forest as a result of wave-trunk interactions and wave breaking. The suspended sediment concentration depends on wave intensity and tidal current velocity. Wave action is one of the main factors forcing sediment transport and coastal erosion at the study site; even the wave field at the study site is not so strong. The establishment of mangrove vegetation can encourage the deposition of sediment, or at least the retention of the flood-tide sediment influx.
Źródło:
Oceanologia; 2006, 48, 1
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of different equations of undrained shear strength estimations using Atterberg Limits on Pontianak Soft Clay
Autorzy:
Widodo, S.
Ibrahim, A.
Hong, S.
Powiązania:
https://bibliotekanauki.pl/articles/115700.pdf
Data publikacji:
2012
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
undrained shear strength
Atterberg limits
cohesion
soft clay
Opis:
Many researchers have done study to estimate the value of undrained shear strength for fine grained soils like clay or silt. Determining of undrained shear strength and compressibility parameters in laboratory are really tedious and time consuming. Therefore, a correlation between undrained shear strength and Atterberg limits is useful for restraint of testing number and costs. Central tendency parameters such as an average, deviation standard and coeffi cient of variation are performed to analyze the data of soft clay in Pontianak, Indonesia. Based on analysis that undrained shear strength coincides with 50 percentile of distribution data meanwhile undrained compressive strength is around twice of cohesion for testing using unconfi ned pressure. This relationship is the most familiar equation. Moreover, undrained shear strength using mean value is more realistic for correlation between undrained shear strength and Atterberg limits on some equations from previous findings.
Źródło:
Challenges of Modern Technology; 2012, 3, 3; 46-50
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric study simulation of axially loaded ored pile using finite element ode—Plaxis Software on subsurface soils Khartoum area-Sudan
Autorzy:
Ibrahim, A. M.
Widodo, S.
Hong, S.
Powiązania:
https://bibliotekanauki.pl/articles/115670.pdf
Data publikacji:
2012
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
bored pile
finite code
plaxis software
Opis:
The diversity and complexity of subsurface soil in studied area consisting of alluvial deposits cause many diffi culties for foundation engineering. Therefore, a solution is needed for foundation in this problematic soil. In Sudan, raft foundation represents the basic and most widespread shallow foundation method for engineering structure except for bridges where the pile foundation is used. In recent years, after the discovery of petroleum in Sudan, a major advance in piling technology is needed due to intensive building of large numbers of precast high-rise tower. This paper used Plaxis software to understand the behavior of axially loaded bored pile using different loads, lengths and diameters of piles. In this paper a comprehensive analytical study using fi nite element analysis is presented and parametric study of pile under vertical load is performed. The analytical and quantitative analysis in this study shows useful understanding of the behavior of bored pile.
Źródło:
Challenges of Modern Technology; 2012, 3, 3; 33-38
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impedance and Scattering Variance Ratios of Complicated Wave Scattering Systems in the Low Loss Regime
Autorzy:
Yeh, J.
Drikas, Z.
Gil Gil, J.
Hong, S.
Taddese, B.
Ott, E.
Antonsen, T.
Andreadis, T.
Anlage, S.
Powiązania:
https://bibliotekanauki.pl/articles/1399042.pdf
Data publikacji:
2013-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
05.45.Mt
24.60.-k
42.25.Dd
78.20.Bh
Opis:
Random matrix theory successfully predicts universal statistical properties of complicated wave scattering systems in the semiclassical limit, while the random coupling model offers a complete statistical model with a simple additive formula in terms of impedance to combine the predictions of random matrix theory and nonuniversal system-specific features. The statistics of measured wave properties generally have nonuniversal features. However, ratios of the variances of elements of the impedance matrix are predicted to be independent of such nonuniversal features and thus should be universal functions of the overall system loss. In contrast with impedance variance ratios, scattering variance ratios depend on nonuniversal features unless the system is in the high loss regime. In this paper, we present numerical tests of the predicted universal impedance variance ratios and show that an insufficient sample size can lead to apparent deviation from the theory, particularly in the low loss regime. Experimental tests are carried out in three two-port microwave cavities with varied loss parameters, including a novel experimental system with a superconducting microwave billiard, to test the variance-ratio predictions in the low loss time-reversal-invariant regime. It is found that the experimental results agree with the theoretical predictions to the extent permitted by the finite sample size.
Źródło:
Acta Physica Polonica A; 2013, 124, 6; 1045-1052
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Suitability of Centella Asiatica (Pegaga) as a Food Source for Rearing Spodoptera Litura (F.) (Lepidoptera: Noctuidae) under Laboratory Condition
Autorzy:
Javar, S.
Sajap, A.S.
Mohamed, R.
Hong, L.W.
Powiązania:
https://bibliotekanauki.pl/articles/65387.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
When conducting entomological research, it is necessary to have a sufficient quantity of the desired pest. One of the pests commonly used in research is Spodoptera litura. Mass rearing of herbivorous caterpillars like S. litura requires large amounts of a suitable food source. Hence, the use of an easy-to-grow host plant would be most practical and reasonable. Centella asiatica known as ‘pegaga’ grows easily, produces plenty of leaves, and is available throughout the year in Malaysia. The suitability of C. asiatica as a food source for S. litura was evaluated by studying the biology of this pest on excised C. asiatica leaves, under laboratory conditions. S. litura completed its whole life cycle in 29 to 35 days. The mean pupal weight and the average number of eggs laid by a single female were 0.341 g and 1,930 eggs, respectively. Daily monitoring of the larval development stages as well as analysis on the width of head capsules, revealed the existence of six instars during the larval stages of S. litura. The cumulative survival rate for immature developmental stages was 80%, while the stage-specific survivorship was over 90%. This study demonstrated the use of ‘pegaga’ as a suitable new food source for when rearing S. litura larvae in the laboratory.
Źródło:
Journal of Plant Protection Research; 2013, 53, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Different Mechanical Milling Processes On Morphology And Microstructural Changes Of Nano And Micron Al-Powders
Wpływ różnych procesów mielenia na morfologię i mikrostrukturę nanometrycznych i mikronowych proszków Al
Autorzy:
Kim, H.-S.
Madavali, B.
Eom, T.-J.
Kim, C.- M.
Koo, J.-M.
Lee, T. H.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/355715.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al alloys
high-energy ball milling
low energy ball milling
plastic deformation
stopy Al
wysokoenergetyczne mielenie kulkowe
mielenie energooszczędne
odkształcenia plastyczne
Opis:
In this research, effect of the various mechanical milling process on morphology and microstructural changes of nano and micron Al-powders was studied. The milling of Al-powders was performed by both high energy and low energy ball milling process. The influence of milling (pulverizing) energy on the structural changes of Al-powders was studied. Al-nanoparticles were agglomerated during the MA and its size was increased with increasing milling while micron Al-powder gets flattened shape during high energy ball milling due to severe plastic deformation. Meanwhile, structural evolution during high energy ball milling of the nano powder occurred faster than that of the micron powder. A slight shift in the position of X-ray diffraction peaks was observed in nano Al-powders but it was un-altered in macro Al-powders. The variation in lattice parameters was observed only for nano Al powders during the high energy ball milling due to lattice distortion.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1235-1239
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Heat-Treatment On Microstructure And Magnetic Properties Of Nanocrystallized Mn-Zn Ferrite Powders
Wpływ obróbki cieplnej na mikrostrukturę i właściwości magnetyczne nanokrystalicznych proszków ferrytu Mn-Zn
Autorzy:
Lee, W. H.
Hong, C. S.
Chang, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/351552.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high energy ball milling
nanosized particles
crystallite size
magnetic properties
frezowanie kulowe
nanocząstki
wielkości krystalitów
właściwości magnetyczne
Opis:
The initial ferrite powders were subjected to high energy ball milling at 300rpm for 3h, and subsequently heat-treated at 573-1273K for 1h. Based on the observation of microstructure and measurement of magnetic properties, the heat-treatment effect was investigated. The size of initial powders was approximately 70μm. After milling, the powders with approximately 230nm in size were obtained, which were composed of the nano-sized particles of approximately 15nm in size. The milled powders became larger to approximately 550nm after heat-treatment at 973K. In addition, the size of particles increased to approximately 120nm with increasing temperature up to 973K. The coercivity of initial powders was almost unchanged after milling, whereas the saturation magnetization increased. As the heat-treatment temperature increased, the saturation magnetization gradually increased and the maximum coercivity was obtained at 773K.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1347-1350
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Ti Powder Addition On The Fabrication Of TiO2 Nanopowders
Wpływ dodatku nanoproszku Ti na zagęszczanie i spiekanie nanoproszków TiO2
Autorzy:
Raihanuzzaman, R. M.
Park, H. Y.
Ghomashchi, R.
Kwon, T. H.
Son, H.-T.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/353186.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
TiO2 nanopowder
magnetic pulsed compaction
densification
sintering
nanoproszek Ti
magnetyczne zagęszczanie impulsowe
zagęszczanie
spiekanie
Opis:
Sintered samples of Ti added TiO2 nanopowders were fabricated by combined application of magnetic pulsed compaction (MPC) and sintering. The effect of Ti nano powder on density, shrinkage and hardness of the samples were investigated as part of the study. The optimum processing conditions were found to be around 0.5 GPa MPC pressure and 1450°C sintering temperature, illustrating maximum density, hardness and minimum shrinkage. High pressure compaction using MPC was found to enhance density with increasing MPC pressure up to 0.9 GPa, and significantly reduce the total shrinkage (about 16% in this case) in the sintered bulks compared to other general processes (about 18%). While sintered samples blended with micro Ti showed presence of microstructural cracks, the samples with 1-2% nano Ti had less or no cracks on them. Overall, the inclusion of nano Ti indicated improvement in mechanical properties of TiO2 nanopowders sintered preforms as opposed to micro Ti-added TiO2.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1473-1477
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication Of Zn4Sb3 Alloys By A Combination Of Gas-Atomization And Spark Plasma Sintering Processes
Wytwarzanie i konsolidacja proszków stopowych zn4sb3 przez kombinację procesów atomizacji gazowej i spiekania
Autorzy:
Dharmaiah, P.
Kim, H.-S.
Lee, L. H.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/355894.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas atomization
microstructure
spark plasma sintering (SPS)
X-ray diffraction
atomizacja gazowa
mikrostruktura
SPS
spiekanie plazmowe
analiza rentgenowska (XRD)
Opis:
In this study, single phase polycrystalline Zn4Sb3 as well as 11 at.% Zn-rich Zn4Sb3 alloy having ε-Zn4Sb3 (majority phase) and Zn (minority phase) phases bulk samples produced by gas-atomization and subsequently consolidated by spark plasma sintering (SPS) process. The crystal structures were analyzed by X-ray diffraction (XRD) and cross-sectional microstructure were observed by the scanning electron microscopy (SEM). The internal grain microstructure of 11at.% Zn-rich Zn4Sb3 powders shows lamellar structure. Relative density, Vickers hardness and crack lengths were measured to investigate the effect of sintering temperature of Zn4Sb3 samples which are sintered at 653, 673 and 693 K. Relative density of the single phase bulk Zn4Sb3 sample reached to 99.2% of its theoretical density. The micro Vickers hardness of three different sintering temperatures were found around 2.17 – 2.236 GPa.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1417-1421
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Joining Of Green Body And Dense Substrate For Indium Tin Oxide Under Uniaxial Pressure In An Open Condition
Łączenie zielonej masy i gęstego podłoża z tlenku cyny indu w warunkach jednoosiowego ściskania w stanie otwartym
Autorzy:
Moon, G.-S.
Chung, T.-J.
Yang, S. H.
Hong, G.-S.
Oh, K.-S.
Powiązania:
https://bibliotekanauki.pl/articles/355654.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
transparent conducting oxide
indium tin oxide
green body
joining
tlenek indu
zielona masa
łączenie
Opis:
The green body and dense substrate of indium tin oxide was joined by uniaxially pressing at 0.3 MPa at 1300°C to test the restoring of the eroded part of transparent conducting oxide target. The green body was sintered to 98% of theoretical density under the suppression of shrinkage along the boundary below 5%. The boundary between two parts was free of pore but could be recognized from the difference in grain sizes. The joined part had the virtually same density with the substrate, but the grain size was less than one fifth compared with that of substrate.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1209-1212
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure And Thermoelectric Properties Of TAGS-90 Compounds Fabricated By Mechanical Milling Process
Mikrostruktura i właściwości termoelektryczne związków TAGS-90 wytworzonych przez mielenie
Autorzy:
Kim, H.-S.
Babu, M.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/353404.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
TAGS-90
thermoelectric properties
high-energy milling
SPS
właściwości termoelektryczne
mielenie wysokoenergetyczne
Opis:
TAGS-90 compound powder was directly prepared from the elements by high-energy ball milling (HEBM) and subsequently consolidated by a spark plasma sintering (SPS). Effect of milling time on the microstructure and thermoelectric properties of the samples were investigated. The particle size of fabricated powders were decreased with increasing milling time, finally fine particles with ~1μm size was obtained at 90 min. The SPS samples exhibited higher relative densities (>99%) with fine grain size. X-ray diffraction analysis (XRD) and energy dispersion analysis (EDS) results revealed that all the samples were single phase of GeTe with exact composition. The electrical conductivity of samples were decreased with milling time, whereas Seebeck coefficient increased over the temperature range of RT~450°C. The highest power factor was 1.12×10-3 W/mK2 obtained for the sample with 90 min milling at 450°C.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1231-1234
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis And Electrochemical Characteristics Of Mechanically Alloyed Anode Materials SnS2 For Li/SnS2 Cells
Synteza mechaniczna i charakterystyka elektrochemiczna materiałów anodowych SnS2 dla ogniw Li/SnS2
Autorzy:
Hong, J. H.
Liu, X. J.
Park, D. K.
Kim, K. W.
Ahn, H. J.
Ahn, I. S.
Powiązania:
https://bibliotekanauki.pl/articles/356903.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
MA
Li/SnS2 cell
PCA
wet milling process and electrochemical characteristics
ogniwa Li/SnS2
charakterystyka elektromechaniczna
Opis:
With the increasing demand for efficient and economic energy storage, tin disulfide (SnS2), as one of the most attractive anode candidates for the next generation high-energy rechargeable Li-ion battery, have been paid more and more attention because of its high theoretical energy density and cost effectiveness. In this study, a new, simple and effective process, mechanical alloying (MA), has been developed for preparing fine anode material tin disulfides, in which ammonium chloride (AC), referred to as process control agents (PCAs), were used to prevent excessive cold-welding and accelerate the synthesis rates to some extent. Meanwhile, in order to decrease the mean size of SnS2 powder particles and improve the contact areas between the active materials, wet milling process was also conducted with normal hexane (NH) as a solvent PCA. The prepared powders were both characterized by X-ray diffraction, Field emission-scanning electron microscopeand particle size analyzer. Finally, electrochemical measurements for Li/SnS2 cells were takenat room temperature, using a two-electrode cell assembled in an argon-filled glove box and the electrolyte of 1M LiPF6 in a mixture of ethylene carbonate(EC)/dimethylcarbonate (DMC)/ethylene methyl carbonate (EMC) (volume ratio of 1:1:1).
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1191-1194
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three Insensitive Energetic Co-crystals of 1-Nitronaphthalene, with 2,4,6-Trinitrotoluene (TNT), 2,4,6-Trinitrophenol (Picric Acid) and D-Mannitol Hexanitrate (MHN)
Autorzy:
Hong, D.
Li, Y.
Zhu, S.
Zhang, L.
Pang, C.
Powiązania:
https://bibliotekanauki.pl/articles/1063066.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
co-crystal
insensitive energetic material
crystal structure
explosive properties
Opis:
Co-crystallization is proposed as an effective method to alter the physicochemical properties of energetic materials, e.g. density, sensitivity and solubility. As reported in this paper, it was found that 1-nitronaphthalene could form cocrystals with TNT, picric acid and MHN in a 1:1 molecular ratio. The sensitivity and thermal stability of the 1-nitronaphthalene co-crystals was greatly improved compared with that of pure TNT, picric acid and MHN. In addition, the melting points of TNT, picric acid and MHN were lowered through co-crystallization with 1-nitronaphthalene. The electrostatic potential surface of 1-nitronaphthalene, calculated by the DFT method, showed that the electron-rich 1-nitronaphthalene has a tendency to be a proton donor and to co-crystallize with other energetic materials. The structures of the co-crystals of 1-nitronaphthalene with TNT and picric acid were characterized by single crystal X-ray diffraction (SXRD). The 1-nitronaphthalene/MHN co-crystal was studied by powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and FTIR.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 1; 47-62
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Economic statistical design of variable sampling interval X̅ control chart based on surrogate variable using genetic algorithms
Autorzy:
Lee, T.-H.
Hong, S.-H.
Kwon, H.-M.
Lee, M.
Powiązania:
https://bibliotekanauki.pl/articles/406970.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
economic design
surrogate variable
variable sampling interval
TRISO Fuel
genetic algorithms
Opis:
In many cases, a X̅ control chart based on a performance variable is used in industrial fields. Typically, the control chart monitors the measurements of a performance variable itself. However, if the performance variable is too costly or impossible to measure, and a less expensive surrogate variable is available, the process may be more efficiently controlled using surrogate variables. In this paper, we present a model for the economic statistical design of a VSI (Variable Sampling Interval) X̅ control chart using a surrogate variable that is linearly correlated with the performance variable. We derive the total average profit model from an economic viewpoint and apply the model to a Very High Temperature Reactor (VHTR) nuclear fuel measurement system and derive the optimal result using genetic algorithms. Compared with the control chart based on a performance variable, the proposed model gives a larger expected net income per unit of time in the long-run if the correlation between the performance variable and the surrogate variable is relatively high. The proposed model was confined to the sample mean control chart under the assumption that a single assignable cause occurs according to the Poisson process. However, the model may also be extended to other types of control charts using a single or multiple assignable cause assumptions such as VSS (Variable Sample Size) X̅ control chart, EWMA, CUSUM charts and so on.
Źródło:
Management and Production Engineering Review; 2016, 7, 4; 54-64
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies