Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Han, R." wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
The Effect of Power Density on Diffusion Length and Energy Gap of a-Si:H and nc-Si:H Thin Films Prepared by PECVD Technique
Autorzy:
Badran, R.
Al-Amodi, H.
Yaghmour, S.
Shaklan, S.
Bruggemann, R.
Han, X.
Xiong, S.
Powiązania:
https://bibliotekanauki.pl/articles/1419002.pdf
Data publikacji:
2012-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.20.-e
78.20.Ci
73.61.Jc
78.30.Ly
Opis:
The increase in power density of 0.3, 0.5, 0.6, and 0.7 W $cm^{-2}$ for hydrogenated amorphous and nanocrystalline silicon (a-Si:H and nc-Si:H) thin film samples prepared by plasma enhanced chemical vapor deposition technique causes an increase in crystalline volume fraction when the silane concentration is fixed. This increase in crystalline volume fraction is correlated to the absorption coefficient and refractive index which are determined from ellipsometric measurements. The crystallinity of samples is studied by both Raman and X-ray diffraction techniques. A mild change in the optical energy gap around an average value of 1.8 eV is noticed due to the observed change in the degree of crystallinity of the samples when power density increases. Moreover, the ambipolar diffusion length measured by the steady-state photocarrier grating technique is found to change with the increase in power density. The values of some obtained optical parameters are compared to a standard crystalline sample.
Źródło:
Acta Physica Polonica A; 2012, 122, 3; 576-580
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Analysis and Simulations of Quasistatic Frictionless Contact Problems
Autorzy:
Fernandez Garcia, J. R.
Han, W.
Shillor, M.
Sofonea, M.
Powiązania:
https://bibliotekanauki.pl/articles/908327.pdf
Data publikacji:
2001
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
analiza numeryczna
quasistatyka
metoda elementów skończonych
quasistatic contact
Signorini condition
normal compliance
viscoplasticity
variational inequalitie
error estimate
finite element method (FEM)
numerical approximation
Opis:
A summary of recent results concerning the modelling as well as the variational and numerical analysis of frictionless contact problems for viscoplastic materials are presented. The contact is modelled with the Signorini or normal compliance conditions. Error estimates for the fully discrete numerical scheme are described, and numerical simulations based on these schemes are reported.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2001, 11, 1; 205-222
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transcriptomic landscape of Dendrobium huoshanense and its genes related to polysaccharide biosynthesis
Autorzy:
Han, R.
Xie, D.
Tong, X.
Zhang, W.
Liu, G.
Peng, D.
Yu, N.
Powiązania:
https://bibliotekanauki.pl/articles/57911.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
Dendrobium huoshanense has long been used to treat various diseases in oriental medicine. In order to study its gene expression profile, transcripts involved in the biosynthesis of precursors of polysaccharides, as well as mechanisms underlining morphological differences between wild and cultivated plants, three organs of both wild type and cultivated D. huoshanense were collected and sequenced by Illumina HiSeq4000 platform, yielding 919,409,540 raw reads in FASTQ format. After Trinity de novo assembly and quality control, 241,242 nonredundant contigs with the average length of 967.5 bp were generated. qRT-PCR experiment on the selected transcripts showed the transcriptomic data were reliable. BLASTx was conducted against NR, SwissProt, String, Pfam, and KEGG. Gene ontology annotation revealed more than 40,000 contigs assigned to catalytic activity and metabolic process, suggesting its dynamic physiological activities. By searching KEGG pathway, six genes potentially involved in mannose biosynthetic pathway were retrieved. Gene expression analysis for stems between wild and cultivated D. huoshanense resulted in 956 genes differentially expressed. Simple sequence repeats (SSRs) analysis revealed 143 SSRs with the unit size of 4 and 3,437 SSRs the size of 3. The obtained SSRs are the potential molecular markers for discriminating distinct cultivars of D. huoshanense.
Źródło:
Acta Societatis Botanicorum Poloniae; 2018, 87, 1
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of medicinal plant Schisandra chinensis using a potential DNA barcode ITS2
Autorzy:
Li, X.-K.
Wang, B.
Han, R.-C.
Zheng, Y.-C.
Yin, H.-B.
Xu, L.
Zhang, J.-K.
Xu, B.-L.
Powiązania:
https://bibliotekanauki.pl/articles/56996.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
identification
internal transcribed spacer
medicinal plant
Schisandra chinensis
DNA barcode
Opis:
To test whether the internal transcribed spacer 2 (ITS2) region is an effective marker for using in authenticating of the Schisandra chinensis at the species and population levels, separately. And the results showed that the wild populations had higher percentage of individuals that had substitution of C→A at site 86-bp than the cultivated populations. At sites 10-bp, 37-bp, 42-bp and 235-bp, these bases of the Schisandra sphenanthera samples differed from that of S. chinensis. Two species showed higher levels of inter-specific divergence than intra-specific divergence within ITS2 sequences. However, 24 populations did not demonstrate much difference as inter-specific and intra-specific divergences were concerned. Both S. chinensis and S. sphenanthera showed monophyly at species level, yet the samples of different populations shown polyphyly at population level. ITS2 performed well when using BLAST1 method. ITS2 obtained 100% identification success rates at the species level for S. chinensis, with no ambiguous identification at the genus level for ITS2 alone. The ITS2 region could be used to identify S. chinensis and S. sphenanthera in the “Chinese Pharmacopoeia”. And it could also correctly distinguish 100% of species and 100% of genera from the 193 sequences of S. chinensis. Hence, the ITS2 is a powerful and efficient tool for species identification of S. chinensis.
Źródło:
Acta Societatis Botanicorum Poloniae; 2013, 82, 4
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Hydrophobic Surgical Forceps using Powder Injection Molding and Surface Treatment
Autorzy:
Park, D. Y.
Park, B. R.
Gal, C. W.
Lin, D.
Han, J. S.
Jeong, M.-S.
Bollina, R.
Hwang, W.
Park, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/352093.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder injection molding
hydrophobic
debinding
sintering
surface treatment
Opis:
Hydrophobic surgical forceps of end-effectors for laparoscopic operations or minimally invasive surgery were developed through powder injection molding (PIM) and surface treatment. Processing conditions for mixing, debinding, and sintering were investigated to produce defect-free components. An optimum solid loading was determined by torque rheometry experiments. The optimized processing conditions for debinding and sintering were designed through the measurement of weight loss and shrinkage behavior by thermogravimetric analysis and dilatometry experiments. After producing the surgical forceps based on the optimized processing conditions via PIM, surface treatment was carried out to generate the hydrophobic structure on the surface.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 473-480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Remediation of polluted waters and wastewater by radiation processing
Autorzy:
Sampa, M. H. O.
Takács, E.
Gehringer, P.
Rela, P. R.
Ramirez, T.
Amro, H.
Trojanowicz, M.
Botelho, M. L.
Han, B.
Solpan, D.
Cooper, W. J.
Emmi, S. S.
Wojnárovits, L.
Powiązania:
https://bibliotekanauki.pl/articles/147644.pdf
Data publikacji:
2007
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
electron beam
wastewater treatment
pesticides
dyes
degradation
radiation technology
Opis:
Application of radiation processing for drinking water, wastewater, and groundwater treatment is a cost effective process which may insure adequate availability of that resource worldwide. This paper summarizes the results of a Coordinated Research Project (organized by the IAEA) with participants from 10 countries with the purpose of describing the degradation mechanism of organic impurities, and establishing optimal treatment conditions. Decoloration, disinfection, microbiological and toxicological experiments are also mentioned. These experiments led to pilot plants and also to a large scale industrial realization of radiation technology.
Źródło:
Nukleonika; 2007, 52, 4; 137-144
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Annealing Study of Al/GaSb Contact with the Use of Doppler Broadening Technique
Autorzy:
Wang, H. Y.
Weng, H. M.
Ling, C. C.
Ye, B. J.
Zhou, X. Y.
Han, R. D.
Powiązania:
https://bibliotekanauki.pl/articles/2043365.pdf
Data publikacji:
2005-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
68.35.Ct
73.40.Sx
Opis:
Using a monoenergetic positron beam, annealing study of the Al/n-GaSb system was performed by monitoring the Doppler broadening of the annihilation radiation as a function of the positron implanting energy. The S-parameter against positron energy data was successfully fitted by a three-layer model (Al/interface/GaSb). The annealing out of the open volume defects in the polycrystalline Al layer was revealed by the decrease in the S-parameter and the increase in the effective diffusion length of the Al layer. For the as-deposited samples, a 5 nm interfacial region with S-parameter larger than those of the Al overlayer and the bulk was identified. After the 400ºC annealing, this interfacial region extends to over 40 nm and its S-parameter dramatically drops. This is possibly due to the new phase formation at the interface. Annealing behaviors of S$\text{}_{B}$ and L$\text{}_{+,B}$ of the GaSb bulk showed the annealing out of positron traps (possibly the V$\text{}_{Ga}$-related defect) at 250ºC. However, a further annealing at 400ºC induces the formation of positron traps, which are possibly of another kind of V$\text{}_{Ga}$-related defect and the positron shallow trap GaSb antisite.
Źródło:
Acta Physica Polonica A; 2005, 107, 5; 874-879
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soft-sediment deformation structures in cores from lacustrine slurry deposits of the Late Triassic Yanchang Fm. (central China)
Autorzy:
Yang, R.
van Loon, A. J.
Yin, W.
Fan, A.
Han, Z.
Powiązania:
https://bibliotekanauki.pl/articles/94445.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
soft-sediment deformation structures
low-density gravity-flow deposits
Triassic
lacustrine sediments
Ordos basin
China
struktury deformacji
osady miękkie
złoża grawitacyjne o niskiej gęstości
trias
osady jeziorne
zlewnia
Ordos
Chiny
Opis:
The fine-grained autochthonous sedimentation in the deep part of a Late Triassic lake was frequently interrupted by gravity-induced mass flows. Some of these mass flows were so rich in water that they must have represented slurries. This can be deduced from the soft-sediment deformation structures that abound in cores from these lacustrine deposits which constitute the Yanchang Fm., which is present in the Ordos Basin (central China). The flows and the resulting SSDS were probably triggered by earthquakes, volcanic eruptions, shear stress of gravity flows, and/or the sudden release of overburden-induced excess pore-fluid pressure. The tectonically active setting, the depositional slope and the high sedimentation rate facilitated the development of soft-sediment deformations, which consist mainly of load casts and associated structures such as pseudonodules and flame structures. Sediments with such deformations were occasionally eroded by slurries and became embedded in their deposits.
Źródło:
Geologos; 2016, 22, 3; 201-211
1426-8981
2080-6574
Pojawia się w:
Geologos
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies