Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gorka, M." wg kryterium: Autor


Wyświetlanie 1-70 z 70
Tytuł:
Działalność innowacyjna podmiotów rolniczych na przykładzie rolniczych spółdzielni produkcyjnych województwa podkarpackiego
Innovative activity of agricultural subjects on the example of cooperative agricultural of the Podkarpackie region
Autorzy:
Gorka, M.
Powiązania:
https://bibliotekanauki.pl/articles/864685.pdf
Data publikacji:
2013
Wydawca:
The Polish Association of Agricultural and Agribusiness Economists
Opis:
Zaprezentowano problematykę działalności innowacyjnej podejmowanej przez rolnicze spółdzielnie produkcyjne w województwie podkarpackim w latach 2008-2010. Do grupowania obiektów badawczych wykorzystano metodę analizy skupień oraz analizę wariancyjną. Z przeprowadzonych badań wynika, że większą aktywnością w zakresie działalności innowacyjnej wykazywały się spółdzielnie znajdujące się w skupieniu A i dlatego nazwano je segmentem o wysokim poziomie innowacyjności. Skupienie B utworzyło segment o średnim poziomie innowacyjności i skupienie C o niskim poziomie innowacyjności.
This paper presents the issues of innovation activity undertaken by agricultural cooperatives in Podkarpackie Region in 2008-2010. For the purpose of grouping ofresearchfacilities cluster analysis method and analysis of variance were used. The study shows that more activity in thefield of innovation was exhibited by cooperatives that are in focus A and therefore they were called segment A with high level of innovation, the focus with a medium level of innovation was labeled segment B andfocus C marks low-level innovation.
Źródło:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu; 2013, 15, 3
1508-3535
2450-7296
Pojawia się w:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technologia informacyjna w obszarze cyberbezpieczeństwa państwa i społeczeństwa
Information technology in the area of cyber security of the state and society
Autorzy:
Górka, M.
Powiązania:
https://bibliotekanauki.pl/articles/113359.pdf
Data publikacji:
2017
Wydawca:
STE GROUP
Tematy:
cyberbezpieczeństwo
bezpieczeństwo informacji
cyberprzestępczość
edukacja dla cyberbezpieczeństwa
społeczeństwo informacyjne
cyber security
information security
cybercrime
education for cyber security
information socjety
Opis:
Polityka bezpieczeństwa jest kwestią kluczową dla społeczeństwa informacyjnego. Oprócz zwiększenia zasobów technologicznych w dziedzinie cyberprzestępczości potrzebne są także nowe metody, instrumenty i umiejętności leżące po stronie personelu pracującego w administracji oraz w instytucjach wchodzących w zakres infrastruktury krytycznej. Głównym tematem tego artykułu jest wskazanie na cyberbezpieczeństwo jako zjawisko obecne na styku nauk społecznych oraz technicznych. Zrozumienie oraz zdefiniowanie zagrożeń w zakresie bezpieczeństwa w sieci, może pomóc organizacjom w sektorze publicznym i prywatnym. Cyberbezpieczeństwo jest skomplikowane zjawiskiem. Wynika to przede wszystkim z natury nowoczesnego środowiska, w którym przechowywane są kluczowe informacje dla wielu instytucji. Ponieważ zarówno sektor publiczny, jak i prywatny potrzebują wykwalifikowanych pracowników w obszarze cyberbezpieczeństwa nauka odgrywają ważną rolę w dziedzinie bezpieczeństwa w sieci.
Security policy is a key issue for information society. In addition to increasing technological resources in cybercrime, new methods, instruments and skills are needed for staff working in the administration as well as for institutions involved in critical infrastructure. The main theme of this article is to point to cyber security as a phenomenon at the junction of social and technical sciences. Understanding and defining network security threats can help organizations in the public and private sectors. Cybersecurity is a complex phenomenon. This is primarily due to the nature of a modern environment in which key information is stored for many institutions. As both the public and private sectors need qualified staff in cyber security, science plays an important role in cybersecurity.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2017, 6, 5; 73-89
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The invasion continues - a new locality of Monacha cartusiana (O.F. Muller) (Gastropoda: pulmonata: Helicidae) in the Swietokrzyskie Mts (Central Poland)
Autorzy:
Gorka, M.
Powiązania:
https://bibliotekanauki.pl/articles/83584.pdf
Data publikacji:
2005
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Opis:
A new locality of Monacha cartusiana (O. F. Müller) was found in the city of Kielce, Central Poland. The colony of snails is located above the edge of an abandoned quarry. The new site may suggest that M. cartusiana keeps expanding its distribution range in Poland.
Źródło:
Folia Malacologica; 2005, 13, 4
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kimeryd Garbu Wójczańsko-Pińczowskiego: przegląd i rewizja odsłonięć
Autorzy:
Górka, M.
Powiązania:
https://bibliotekanauki.pl/articles/2061393.pdf
Data publikacji:
2003
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
kimeryd
Ponidzie
jura
litografia
budowa geologiczna
Kimmeridgian
Jurassic
lithography
geological structure
Źródło:
Volumina Jurassica; 2003, 1, 1; 93-98
1896-7876
1731-3708
Pojawia się w:
Volumina Jurassica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Działalność grupowa producentów rolnych w województwie podkarpackim jako przejaw innowacji organizacyjnych
Collective activity of agricultural producers in Podkarpackie province as a aspect of organizational innovation
Autorzy:
Gorka, M.
Powiązania:
https://bibliotekanauki.pl/articles/869766.pdf
Data publikacji:
2014
Wydawca:
The Polish Association of Agricultural and Agribusiness Economists
Opis:
Przedstawiono działalność grupową podejmowaną przez producentów rolnych jako przejaw innowacyjnego działania. Badania zrealizowano w województwie podkarpackim wśród producentów ziarna zbóż i nasion roślin oleistych z wykorzystaniem metody kwestionariusza wywiadu przeprowadzonego z losowo wybranymi członkami grup w 2012 roku. Podejmowanie wspólnych inicjatyw umożliwia osiągnięcie wymiernych korzyści i możliwości zdobycia przewagi konkurencyjnej. Badania wykazały, że integracja pozioma napotyka na liczne utrudnienia, z których najważniejsze to nieporozumienia i konflikty wśród rolników.
In the paper the activities undertaken by a group of agricultural producers as a manifestation of innovative activities were presented. The study was carried out in the province of Podkarpackie province among producers cereal grains and oilseeds using the method of questionnaire, interview with randomly selected members of the group in 2012. The paper argues that undertaking joint initiatives allows for achieving tangible benefits and opportunities to gain competitive advantage. Research showed that horizontal integration in apart from the undoubted benefits, is associated with numerous difficulties, the most important of which is the lack of confidence among farmers and misunderstandings and conflicts.
Źródło:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu; 2014, 16, 4
1508-3535
2450-7296
Pojawia się w:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badenian (middle Miocene) decapod crustaceans from western Ukraine, with remarks on eco-taphonomy, palaeoecology and biogeography
Autorzy:
Górka, M.
Powiązania:
https://bibliotekanauki.pl/articles/138814.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
crustaceans
decapods
taxonomy
paleoenvironment
eco-taphonomy
Badenian
middle Miocene
Ukraine
skorupiaki
dziesięcionogi
taksonomia
paleośrodowisko
ekotafonomia
baden
środkowy miocen
Ukraina
Opis:
The decapod fauna from the Badenian (middle Miocene) deposits of western Ukraine comprises in total 31 taxa: 20 species, 9 taxa left in open nomenclature, and 2 determined at family level. Thirteen of these taxa are reported for the first time from the territory of Ukraine. Among them are the first records of Trapezia glaessneri Müller, 1976 in the Fore-Carpathian Basin and Pachycheles sp. in Paratethys. One taxon (Petrolisthes sp. A) probably represents a new species. The occurrence of this significant decapod fauna is restricted almost exclusively to the Upper Badenian (i.e., early Serravallian) coralgal reefs of the Ternopil Beds. The taxonomic composition of the decapods indicates that the Late Badenian depositional environment was a shallow marine basin dominated by reefs that developed in warm-to-tropical waters of oceanic salinity. The decapod assemblage from the Ternopil Beds is similar in its taxonomic composition to numerous decapod faunules from fossil reefs of Eocene to Miocene age from the Mediterranean realm and of Miocene age from Paratethys. In contrast, decapod remains are very scarce in Badenian siliciclastic deposits (Mikolaiv Beds) and are represented by the most resistant skeletal elements, i.e., dactyli and fixed fingers. This scarcity was caused by the high-energy environment, with frequent episodes of redeposition, which disintegrated and abraded the decapod remains. The decapod fauna from the Badenian (middle Miocene) deposits of western Ukraine comprises in total 31 taxa: 20 species, 9 taxa left in open nomenclature, and 2 determined at family level. Thirteen of these taxa are reported for the first time from the territory of Ukraine. Among them are the first records of Trapezia glaessneri Müller, 1976 in the Fore-Carpathian Basin and Pachycheles sp. in Paratethys. One taxon (Petrolisthes sp. A) probably represents a new species. The occurrence of this significant decapod fauna is restricted almost exclusively to the Upper Badenian (i.e., early Serravallian) coralgal reefs of the Ternopil Beds. The taxonomic composition of the decapods indicates that the Late Badenian depositional environment was a shallow marine basin dominated by reefs that developed in warm-to-tropical waters of oceanic salinity. The decapod assemblage from the Ternopil Beds is similar in its taxonomic composition to numerous decapod faunules from fossil reefs of Eocene to Miocene age from the Mediterranean realm and of Miocene age from Paratethys. In contrast, decapod remains are very scarce in Badenian siliciclastic deposits (Mikolaiv Beds) and are represented by the most resistant skeletal elements, i.e., dactyli and fixed fingers. This scarcity was caused by the high-energy environment, with frequent episodes of redeposition, which disintegrated and abraded the decapod remains.
Źródło:
Acta Geologica Polonica; 2018, 68, 4; 511--535
0001-5709
Pojawia się w:
Acta Geologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Innowacyjność wybranych rolniczych spółdzielni produkcyjnych województwa podkarpackiego
Innovation of selected agricultural cooperatives in Podkarpackie Province
Autorzy:
Gorka, M.
Bober, T.
Powiązania:
https://bibliotekanauki.pl/articles/870830.pdf
Data publikacji:
2015
Wydawca:
The Polish Association of Agricultural and Agribusiness Economists
Opis:
Przedstawiono działalność innowacyjną podejmowaną przez rolnicze spółdzielnie produkcyjne zlokalizowane w województwie podkarpackim. Badania wykazały, że innowacje wprowadzane przez badane spółdzielnie miały głównie charakter innowacji technologicznych, a w niewielkim stopniu nietechnologicznych. Analizując poszczególne grupy spółdzielni różniące się poziomem innowacyjności, stwierdzono, że najbardziej prorozwojowym zachowaniem charakteryzowały się spółdzielnie o wysokim poziomie innowacyjności.
The study presents the innovative activity undertaken by agricultural cooperatives located in the Podkarpackie province. Researches showed that innovations implemented by the cooperatives mainly had the character of technological innovations, and in a small extent – non-technological character. When analyzing particular groups of cooperatives with different level of innovation, it was found that the most pro-development behaviors was observed in the I RSP group with a high level of innovation.
Źródło:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu; 2015, 17, 3
1508-3535
2450-7296
Pojawia się w:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane aspekty innowacyjności przedsiębiorstw – studium przypadku
Selected aspects of innovativeness of firms - a case study
Autorzy:
Gorka, M.
Bragiel, E.
Powiązania:
https://bibliotekanauki.pl/articles/864214.pdf
Data publikacji:
2018
Wydawca:
The Polish Association of Agricultural and Agribusiness Economists
Źródło:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu; 2018, 20, 3
1508-3535
2450-7296
Pojawia się w:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Systemy fasad aluminiowo–szklanych i ich ocena wielokryterialna
Aluminum and glass facade systems and their multicriteria assessment
Autorzy:
Górka, M.
Leśniak, A.
Powiązania:
https://bibliotekanauki.pl/articles/2067938.pdf
Data publikacji:
2018
Wydawca:
Politechnika Częstochowska
Tematy:
fasady aluminiowo-szklane
analiza wielokryterialna
podejmowanie decyzji
aluminium and glass facade
multicriteria analysis
decision making
Opis:
Fasady aluminiowo–szklane to jedno z rozwiązań wykonania lekkiej ściany osłonowej. Jest to znak współczesności, jakości i estetyki. Powszechność wykorzystania fasad aluminiowo–szklanych wynika z dużej funkcjonalności oraz wysokiego standardu użytkowania. Różnorodność oferowanych przez producentów systemów fasad aluminiowych sprawia, że inwestor musi dokonać wyboru takiego, który spełni przez niego określone kryteria. Celem artykułu jest prezentacja i ocena wybranych i najczęściej stosowanych systemów fasad aluminiowych. Analizie poddano trzy warianty oferowanych na rynku systemów. Wybór wariantu został dokonany z wykorzystaniem metody analizy wielokryterialnej. Celem autorów jest przedstawienie i porównanie kilku metod wykorzystywanych w analizie wielokryterialnej poprzez rozwiązanie problemu decyzyjnego, jakim jest wybór optymalnego systemu fasady aluminiowo–szklanej.
Aluminum–glass facades are one of the solutions for the light curtain wall. It is a sign of modernity, quality and aesthetics. The common use of aluminum and glass facades is due to the high functionality and high standard of use. The variety of aluminum facade systems offered by manufacturers means that the investor must choose one that meets certain criteria. The aim of the article is to present and evaluate selected and most frequently used aluminum facade systems. Three variants of systems offered on the market were presented and analyzed. The choice of the best variant was made using the multi–criteria analysis method. To enable the comparison and evaluation of the variants authors proposed four criteria. To encode the data four different methods were used to maximize the objectivity of the result.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2018, 24 (174); 102-107
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Delta13C of organic atmospheric dust deposited in Wrocław (SW Poland): critical remarks on the passive method
Autorzy:
Górka, M.
Jędrysek, M. O.
Powiązania:
https://bibliotekanauki.pl/articles/2060221.pdf
Data publikacji:
2008
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
solid organic atmospheric particles
carbon isotopes
Opis:
This paper reports the results of the application of passive collectors to the collection of solid organic atmospheric particles (SOAP) in Wrocław (SW Poland) to carry out stable carbon isotope analyses. delta exp.13C (SOAP) values collected during the vegetation-free period, from November to March, vary in a narrow range from -24.5 to -27.8‰. We show that d13C (SOAP) is able to provide information about atmospheric pollution with respect to different emission sources. delta exp.13C (SOAP) values collected during the period of vegetation growth, from April to October, show a wide range from -20.5 to -26.9‰. The most probable explanations for the 13C- enriched values in summer are that: (i) the SOAP have been contaminated with fresh and decomposed organic matter in the passive collector and/or (ii) SOAP are derived from out side the city or from out side Poland (C4 plant particles). There fore, the d13C (SOAP) may not represent a strictly anthropogenic im pact. The passive collector method for the (SOAP) collection should be applied only in areas with dry deposition of atmospheric dust where deposited organic matter is not de composed in the water contained in collectors. We recommend the use of active sampling methods (hi-volume sampler) to collect SOAP use ful for carbon isotope analyses.
Źródło:
Geological Quarterly; 2008, 52, 2; 115-115
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badenian (Middle Miocene) echinoids and starfish from western Ukraine, and their biogeographic and stratigraphic significance
Autorzy:
Radwański, A.
Górka, M.
Wysocka, A.
Powiązania:
https://bibliotekanauki.pl/articles/138877.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Asteroidea
Echinoids
taxonomy
new species
fossil behaviour
eco-taphonomy
Middle Miocene (Badenian)
Ukraine
jeżowce
taksonomia
nowe gatunki
skamielina
zachowanie
miocen środkowy
baden
Ukraina
Opis:
Echinoderms from the Badenian (Middle Miocene) of the Fore-Carpathian Basin of western Ukraine are facies restricted. The Mykolaiv Beds, stratigraphically older, yielded the starfish Astropecten forbesi (complete skeletons), two genera of sand dollars (Parascutella, Parmulechinus), and numerous other echinoids of the genera Psammechinus , Echinocyamus, Spatangus, Hemipatagus, Echinocardium, Clypeaster, Echinolampas, and Conolampas. The stratigraphically younger, calcareous Ternopil Beds yielded Eucidaris (complete coronae, isolated spines), Arbacina , Brissus, and Rhabdobrissus. Sixteen species of echinoids are distinguished and/or commented. A new brissid, Rhabdobrissus tarnopolensis sp. nov., is established. A mass occurrence of some species (Psammechinus dubius and Hemipatagus ocellatus) contrasts with that of mass aggregations (sand dollars and Echinocardium leopolitanum) by dynamic events in selected layers of proximal tempestites. Of special note is the occurrence of very small specimens, interpreted as juveniles (‘babies’) having been swept out of their restricted biotopes (‘nurseries’). Some species hitherto regarded as of Early Miocene age, and the problem of their persistence beyond the Fore-Carpathian Basin and/or migration into that basin during the Middle Miocene transgression are discussed.
Źródło:
Acta Geologica Polonica; 2014, 64, 2; 207-247
0001-5709
Pojawia się w:
Acta Geologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Miocene burrows of the Ghost Crab Ocypode and their environmental significance (Mykolaiv Sands, Fore-Carpathian Basin, Ukraine)
Autorzy:
Radwański, A.
Wysocka, A.
Górka, M.
Powiązania:
https://bibliotekanauki.pl/articles/138926.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
baden
krab
miocen środkowy
nora
Ocypode
paleośrodowisk
Paratetydy
sedymentologia
Ukraina
Badenian
burrows
Ghost Crab Ocypode
Middle Miocene
palaeoenvironment
Paratethys
sedimentology
Ukraine
Opis:
The huge lithosome of the Middle Miocene (Early Badenian) Mykolaiv Sands, developed at the external margin of the Fore-Carpathian Basin in western Ukraine, is recognized to represent a shallowing-up sequence. Special attention is paid to burrows of the Ghost Crab Ocypode which are pantropical in present-day littoral habitats. In the Stratyn section, burrows of this type become a crucial tool in the interpretation of basin bathymetry, which starts from distal offshore depths, through the foreshore, to the backshore where the Ocypode burrows record a temporary break in sedimentation. Lithification of the sand layers and the Ocypode burrows subsequently progressed in beachrock mode. The Stratyn section demonstrates that the development of submerged shoals and/or emergent parts, throughout the huge mass of the Mykolaiv Sands, is probably responsible for their great variation in thickness in western Ukraine, which has long proved difficult to explain.
Źródło:
Acta Geologica Polonica; 2012, 62, 2; 217-229
0001-5709
Pojawia się w:
Acta Geologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mykolaiv Sands in Opole Minor and beyond : sedimentary features and biotic content of Middle Miocene (Badenian) sand shoals of Western Ukraine
Autorzy:
Wysocka, A.
Radwański, A.
Górka, M.
Powiązania:
https://bibliotekanauki.pl/articles/2059398.pdf
Data publikacji:
2012
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
Western Ukraine
Middle Miocene
Badenian
eco-taphonomy
burrows
depositional structures
sedimentology
Opis:
The Mykolaiv Sands are a huge lithosome of Middle Miocene (Badenian) age, accommodated within the Fore-Carpathian Basin in the Western Ukraine. Typically developed in the area of Opole Minor, it spreads across adjacent regions of Opole to cover an area of about 1300 km2. The varied sedimentary structures and ubiquitous burrows, indicate their development as a stack of sand shoals or related bodies, up to a few tens of metres thick, some of which temporarily reached sea level. Amidst the shoals, storm scours intermittently formed channel-like infills, some with residual lags at the base. The reversed density stratification and/or an increasing gravity gradient involved mass movements, some of which may have been triggered by seismic shocks focused at the shore or the adjacent hinterland of Podolia and Volhynia. Special attention is paid to the diverse fossils, all taphonomically filtered (aragonite shells and chitinous carapaces being lost), but which locally are mass-aggregated. They typify particular sand sets/bodies, to form allochthonous assemblages, some members of which (the cirripedes Scalpellum and Creusia, the shark Hemipristis, the ray Myliobatis) are newly recognized in the Ukrainian part of the Fore-Carpathian Basin. The others enrich considerably the faunal content of the Middle Miocene (Badenian) Paratethyan basins, either in terms of taxonomic diversity, or the eco-taphonomy of selected taxa (the starfish Astropecten, diverse echinoids). The whole faunal content of the Mykolaiv Sands may owe its profuse development to the global Middle Miocene Climatic Optimum of early Badenian age.
Źródło:
Geological Quarterly; 2012, 56, 3; 475--492
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of factors shaping tender prices for lightweight
Autorzy:
Lesniak, A.
Gorka, M.
Wieczorek, D.
Powiązania:
https://bibliotekanauki.pl/articles/886248.pdf
Data publikacji:
2019
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Scientific Review Engineering and Environmental Sciences; 2019, 28, 2[84]
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Co-occurrence of Monacha cartusiana and Monacha claustralis in Poland and Czech Republic
Autorzy:
Pienkowska, J.R.
Gorka, M.
Lesicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/84340.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Źródło:
Folia Malacologica; 2013, 21, 3
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distribution of Monacha claustralis (Rossmässler, 1834) and M. cartusiana (O. F. Müller, 1774) (Eupulmonata: Hygromiidae) in central European and Balkan countries: new data
Autorzy:
Pienkowska, J.R.
Prockow, M.
Gorka, M.
Lesicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/84770.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Źródło:
Folia Malacologica; 2018, 26, 2
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mineralogical and oxygen isotope composition of inorganic dust-fall in Wrocław (SW Poland) urban area – test of a new monitoring tool
Autorzy:
Górka, M.
Jędrysek, M.-O.
Lewicka-Szczebak, D.
Krajniak, J.
Powiązania:
https://bibliotekanauki.pl/articles/2059011.pdf
Data publikacji:
2011
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
atmospheric particles
anthropogenic
oxygen isotopes
Wrocław
Opis:
We have analysed the mineralogical and oxygen isotope composition of solid inorganic atmospheric particles (SIAP) in Wrocław (SW Poland) to determine potential natural and anthropogenic sources of deposited dust. The mineralogical compositions of SIAP and local soils are very similar and quite typical. Dust sources were attributed to high emission sources (two large coal-fired power generation plants, i.e., "Wrocław and "Czechnica") and low emission sources (mostly small furnaces for home heating). A mullite phase was confirmed in the non-magnetic fraction of high emission dust. The δ18181818
Źródło:
Geological Quarterly; 2011, 55, 1; 71-80
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Middle Miocene of the Fore-Carpathian Basin (Poland, Ukraine and Moldova)
Autorzy:
Wysocka, A.
Radwański, A.
Górka, M.
Bąbel, M.
Radwańska, U.
Złotnik, M.
Powiązania:
https://bibliotekanauki.pl/articles/138689.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Lithofacies
fossil assemblages
Middle Miocene
Fore-Carpathian Basin
Polska
Ukraine
Litofacje
miocen
zbiornik przedkarpacki
Polska
Ukraina
Opis:
Studies of Miocene sediments in the Fore-Carpathian Basin, conducted by geologists from the University of Warsaw have provided new insights on the distribution of the facies infilling the basin, particularly in the forebulge and back-bulge zones. The origin of the large-scale sand bodies, evaporitic deposits and large-scale organic buildups is discussed, described and verified. These deposits originated in variable, shallow marine settings, differing in their water chemistry and the dynamics of sedimentary processes, and are unique with regard to the fossil assemblages they yield. Many years of taxonomic, biostratigraphic, palaeoecologic and ecotaphonomic investigations have resulted in the identification of the fossil assemblages of these sediments, their age, sedimentary settings and post-mortem conditions. Detailed studies were focused on corals, polychaetes, most classes of molluscs, crustaceans, echinoderms, and fishes.
Źródło:
Acta Geologica Polonica; 2016, 66, 3; 351-401
0001-5709
Pojawia się w:
Acta Geologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Medobory Hills (Ukraine): Middle Miocene reef systems in the Paratethys, their biological diversity and lithofacies
Miodobory – środkowomioceński system rafowy, jego zróżnicowanie biologiczne i litofacje
Autorzy:
Górka, M.
Studencka, B.
Jasionowski, M.
Hara, U.
Wysocka, A.
Poberezhskyy, A.
Powiązania:
https://bibliotekanauki.pl/articles/2062479.pdf
Data publikacji:
2012
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
coralline algae-vermetid reefs
serpulid-microbialite reefs
lithofacies
biodiversity
Badenian-Sarmatian boundary
Ukraine
Moldova
rafy krasnorostowo-wermetidowe
rafy serpulowo-mikrobialitowe
litofacje
bioróżnorodność
granica baden-sarmat
Ukraina
Mołdawia
Opis:
The unique Middle Miocene reef belt formed within the Paratethyan realm constitutes at present the Medobory Hills in western Ukraine and northernmost Moldova. Not only is the size of this structure (almost 300 km long) quite unusual, but also the development of peculiar facies and their spatial distribution. Two distinct reef generations appear in Medobory (Late Badenian and Early Sarmatian), both separated by a sharp erosional boundary. Two Upper Badenian calcareous lithofacies dominate – organodetrital and biohermal (with coralline-algae as main framework builders accompanied by a rich invertebrate assemblage). The Lower Sarmatian strata, although megascopically very similar to Upper Badenian ones, differ drastically when studied closely. The main reef components here are serpulids and microbialites, usually with ubiquitous, but taxonomically highly impoverished fauna. Differences in lithofacies and biotic communities between both reef systems unveil open-marine environment during formation of Upper Badenian reefs and a drastic change of conditions at the Badenian/Sarmatian boundary (including emersion and intense weathering). The Early Sarmatian basin was established soon after and highly restricted conditions prevailed in it (e.g. with mesohaline waters and intense evaporation occurring simultaneously); its deposits are the last record of Middle Miocene sedimentation within the Medobory area.
Wzgórza Miodoborów, rozciągające się na przestrzeni niemal 300 km na obszarze zachodniej Ukrainy i północnej Mołdawii, założone są na pasie raf miocenu środkowego, uformowanych w obrębie północno-wschodnich peryferii Paratetydy. Znaczne zróżnicowanie litofacjalne, jak i zmienność zespołów biotycznych wśród utworów rafowych jest rezultatem obecności dwóch generacji raf (późnobadeńskiej i wczesnosarmackiej) oddzielonych wyraźną powierzchnią erozyjną. Wśród wapiennych osadów górnego badenu dominują litofacje organodetrytyczne i biohermalne. Ich głównym składnikiem skałotwórczym są krasnorosty, którym towarzyszą bogate taksonomicznie zespoły bezkręgowców, obejmujące m.in. korale, mięczaki, szkarłupnie. Rafy sarmatu dolnego budowane są przez mikrobiality, w obrębie których występują serpule (i podrzednie mszywioły). Silnie zubożona taksonomicznie fauna zamieszkująca rafy sarmackie zdominowana jest przez mięczaki. Różnice bio- i litofacjalne w obrębie wymienionych generacji raf są efektem drastycznej zmiany warunków sedymentacji, połączonej z emersją i intensywnym wietrzeniem, do której doszło na przełomie badenu i sarmatu w efekcie przebudowy basenu przedkarpackiego. W jej wyniku pełnomorski zbiornik późnobadeński został zastąpiony przez silnie izolowany basen wczesnego sarmatu, zaś powstałe w tym ostatnim osady wieńczą sukcesję utworów miocenu w tej części zapadliska przedkarpackiego.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2012, 449; 147--174
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The econimic efficiency of growing sweet potato (Ipomoea batatas L.{Lam.}) in Polish soil and climate conditions
Efektywność uprawy batata (Ipomoea batatas L.{Lam.}) w warunkach glebowo-klimatycznych Polski
Autorzy:
Krochmal-Marczak, B.
Sawicka, B.
Bienia, B.
Górka, M.
Otekunrin, O.A.
Powiązania:
https://bibliotekanauki.pl/articles/1790058.pdf
Data publikacji:
2020
Wydawca:
The Polish Association of Agricultural and Agribusiness Economists
Tematy:
sweet potato
cultivation technologies
marketable yield
cultivars
direct costs
profitability index
słodki ziemniak
technologie uprawy
plon handlowy
odmiany
koszty
bezpośrednie
wskaźniki opłacalności
Opis:
The aim of this research was to determine the economic efficiency of sweet potato production in Polish conditions (49°49′ N, 21°50′ E). The study was based on the results of a 3-year (2017-2019) field experiment conducted in slightly acidic brown earth. The experiment used the random subblocks method, in which the main experimental factors were cultivation technologies: A) traditional, with no cover, B) with the use of PP spunbond nonwoven. Secondary factors included 5 cultivars of sweet potato of all earliness classes (Goldstar, Carmen Rubin, Satsumo Imo, Beauregard, White Triumph). Constant organic and mineral fertilization was used, and cultivation was carried out in accordance with normal agricultural practice. The propagating material included rooted cuttings of sweet potato from in vitro propagation, planted with 50 x 75 cm spacing. The economic effect of production was determined by all experimental factors. The profitability of production was increased by the use of PP spunbond nonwoven. The most beneficial economic factors were achieved when growing the Beauregard cultivar, and the least – when growing White Triumph. The largest cost of sweet potato commercial production were sweet potato cuttings, which amounted to 56%, and the smallest – plant protection products – 1% of direct costs per 1 ha of crops. Sweet potato production in Polish soil and climate conditions between 2017–2019 turned out to be cost-effective.
Celem badań było określenie opłacalności produkcji batata w warunkach Polski (49°49′ N, 21°50′ E). Badania oparto na wynikach trzyletniego (2017-2019) doświadczenia polowego przeprowadzonego na glebie brunatnej, lekko kwaśnej. Eksperyment założono metodą losowanych podbloków, w których czynnikami I rzędu były technologie uprawy: A) tradycyjna, bez okryw i B) z zastosowaniem agrowłókniny polipropylenowej. Czynnik II rzędu stanowiło 5 odmian batata: Goldstar, Carmen Rubin, Satsumo Imo, Beauregard, White Triumph. Stosowano stałe nawożenie organiczne i mineralne, a zabiegi pielęgnacyjne prowadzono według zasad dobrej praktyki rolniczej. Materiałem rozmnożeniowym były ukorzenione sadzonki batata, pochodzące z rozmnożenia in vitro, wysadzone w rozstawie 50 x 75 cm. Efekt ekonomiczny produkcji różnicowały wszystkie czynniki eksperymentu. Opłacalność produkcji zwiększało stosowanie włókniny polipropylenowej. Najkorzystniejsze wskaźniki ekonomicznie uzyskano uprawiając odmianę Beuregard, a najmniej korzystne – w uprawie odmiany White Triumph. Największym kosztem w produkcji towarowej były sadzonki batata, które stanowiły ponad 56% tych kosztów, najmniejszym zaś – środki ochrony roślin i wynosiły 1% kosztów bezpośrednich poniesionych na 1 ha uprawy tego gatunku. Produkcja batata w warunkach glebowo-klimatycznych Polski w latach 2017-2019, okazała się opłacalna.
Źródło:
Annals of The Polish Association of Agricultural and Agribusiness Economists; 2020, 22, 2; 99-110
2657-781X
2657-7828
Pojawia się w:
Annals of The Polish Association of Agricultural and Agribusiness Economists
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monacha claustralis (Rossmassler, 1834) and Monacha cartusiana (O. F. Muller, 1774) in Poland
Autorzy:
Pienkowska, J.R.
Gorka, M.
Matuszak, M.
Bocianowski, P.
Gwardjan, M.
Lesicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/83516.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Tematy:
Monacha claustralis
Monacha cartusiana
invasive species
shell morphology
locality
Polska
Źródło:
Folia Malacologica; 2016, 24, 1
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary results of sulphur isotope studies on sulfides from selected ore deposits and occurrences in the Karkonosze–Izera Massif (the Sudety Mts., Poland)
Autorzy:
Mayer, W.
Jędrysek, M.O.
Górka, M.
Drzewicki, W.
Mochnacka, K.
Pieczka, A.
Powiązania:
https://bibliotekanauki.pl/articles/2086529.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Mineralogiczne
Tematy:
Karkonosze-Izera Massif
sulphur isotope studies
polymetallic mineralization
Opis:
Preliminary sulphur isotope data are presented for selected ore deposits and occurrences in the Karkonosze-Izera Massif, namely, polymetallic mineralization sites at Budniki, Ciechanowice, Izerskie Garby and Sowia Dolina, and the pyrite deposit at Wieściszowice. The data reveal two populations of δ34S values: from 2.74 to 3.95‰ (pyrrhotites and pyrites in Sowia Dolina, and some pyrites in Wieściszowice) and from 0.79 to 1.8‰ (pyrites in Budniki, Ciechanowice and Izerskie Garby, and some pyrites from Wieściszowice). All of the data are indicative of endogenic sulphur typical of hydrothermal mineralization despite the genetic differences between the sites.
Źródło:
Mineralogia; 2012, 43, 3/4; 213--222
1899-8291
1899-8526
Pojawia się w:
Mineralogia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New data on the distribution and molecular diagnostics of Monacha claustralis (Rossmässler, 1834) and M. cartusiana (O. F. Müller, 1774) (Gastropoda: Eupulmonata: Hygromiidae) in Poland, Bosnia and Serbia
Autorzy:
Pienkowska, J.R.
Gorka, M.
Matuszak, M.
Bocianowski, P.
Gwardjan, M.
Lesicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/84443.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Źródło:
Folia Malacologica; 2016, 24, 4
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Leratiomyces ceres (Strophariaceae, Basidiomycota), new to Poland
Autorzy:
Halama, M.
Gorka, K.
Powiązania:
https://bibliotekanauki.pl/articles/2197186.pdf
Data publikacji:
2019-12-27
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
Leratiomyces ceres
macroscopic analysis
microscopic analysis
invasive species
Upper Silesian region
Polska
Opis:
Leratiomyces ceres, an extra-European species hitherto unknown in Poland, was identified in a public park in Rybnik City (SW Poland). The first Polish collections of the fungus were studied using macroscopic and microscopic features. A brief description and illustration of the species, based on Polish specimens, are presented. The ecology and characteristics distinguishing L. ceres from related Leratiomyces species are also discussed.
Źródło:
Acta Mycologica; 2019, 54, 2; 1131
0001-625X
2353-074X
Pojawia się w:
Acta Mycologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Early Oxfordian Radiolaria from Zalas quarry, Kraków Upland, South Poland
Wczesnooksfordzkie promienice z kamieniołomu w Zalasie, Wyżyna Krakowska, Polska południowa
Autorzy:
Górka, H.
Bąk, M.
Powiązania:
https://bibliotekanauki.pl/articles/191266.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
early Oxfordian
radiolaria
Kraków Upland
biostratigraphy
taxonomy
palaeoecology
Opis:
This paper presents preliminary research on radiolarian faunas from the Upper Jurassic deposits of the Kraków Upland (South Poland) carried at Zalas quarry. The systematic description of twenty-five species of Radiolaria from the lower Oxfordian deposits has been presented herein. The species belong to the orders Nassellaria (16 species) and Spumellaria (9 species). In number of specimens, the assemblage is dominated by spumellarians. The radiolarians show features of Boreal faunas, influenced by Tethyan realm. The assemblage has been correlated with cordatum ammonitic subzone (early Oxfordian).
W pracy przedstawiono wstępne wyniki badań promienic (Radiolaria) z utworów górnej jury, prowadzonych na Wyżynie Krakowskiej w kamieniołomie w Zalasie. Przedstawiono opis systematyczny 25 gatunków promienic z dolnego oksfordu. Spośród opisanych form 16 reprezentuje rząd Nassellaria, a 9 należy do rzędu Spumellaria. Pod względem liczby okazów, w zespole przeważają przedstawiciele rzędu Spumellaria. Promienice reprezentują faunę borealną, która żyła w środowisku o znacznym wpływie morza tetydzkiego. Analizowany zespół promienic został skorelowany z podpoziomem amonitowym cordatum (wczesny oksford).
Źródło:
Annales Societatis Geologorum Poloniae; 2000, 70, 2; 165-179
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ochrona przyrody nieożywionej na terenie Wielkopolskiego Parku Narodowego. Kopalne i współczesne terasy Warty w zapisie strukturalnym i morfologicznym
Autorzy:
Górska-Zabielska, M.
Antczak-Górka, B.
Powiązania:
https://bibliotekanauki.pl/articles/295012.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Geomorfologów Polskich
Tematy:
przyroda nieożywiona
Wielkopolski Park Narodowy
terasy Warty
zapis strukturalny i morfologiczny
Źródło:
Landform Analysis; 2011, 16; 187-190
1429-799X
Pojawia się w:
Landform Analysis
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ przepisów dotyczących obsługi skrętu w lewo na przepustowość skrzyżowań z sygnalizacją świetlną
The impact of regulation on the left turn operation for capacity at intersections with traffic lights
Autorzy:
Buda, M.
Górka, A.
Krukowicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/252344.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sygnalizacja świetlna
aleja Niepodległości
kolizyjny skręt w lewo
bezkolizyjny skręt w lewo
Warszawa
traffic lights
Niepodległości avenue
permitted left turn
protected left turn
Warsaw
Opis:
W artykule podjęto zagadnienie stosowania w programie sygnalizacji faz umożliwiających bezkolizyjny skręt w lewo. Przedstawiono krótką historię przepisów regulujących potrzebę ich wyznaczania. W dalszej części, na przykładzie jednej z warszawskich arterii, scharakteryzowano wpływ zastosowania bezkolizyjnego skrętu w lewo na przepustowość ciągu i warunki ruchu.
The article presents information about using protected left turn phases on crossings in the cities. Beginning contains brief history of governing regulations. After theoretical introducing there is a presentation of case study on one of Warsaw streets where is characterized the effect of using a protected left turn collision on capacity and traffic conditions.
Źródło:
TTS Technika Transportu Szynowego; 2015, 12; 200-204, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fizykochemiczne właściwości mezoporowatych węgli z nanocząstkami zawierającymi żelazo i nikiel otrzymanych metodą miękkiego odwzorowania
Physicochemical properties of soft-templated mesoporous carbons with iron- and nickel-containing nanoparticles
Autorzy:
Górka, J.
Jaroniec, M.
Choma, J.
Powiązania:
https://bibliotekanauki.pl/articles/237768.pdf
Data publikacji:
2011
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
mezoporowate węgle
synteza metodą miękkiego odwzorowania
kopolimer trójblokowy
nanocząstki węgliku żelaza
nanocząstki niklu
adsorpcja
mesoporous carbons
soft-templating synthesis
block copolymer
iron carbide nanoparticles
adsorption
Opis:
Z powodzeniem zsyntezowano mezoporowate kompozyty węglowe zawierające żelazo i nikiel metodą miękkiego odwzorowania w środowisku kwasowym, wykorzystując floroglucynę i formaldehyd jako prekursory węglowe, trójblokowy kopolimer politlenek etylenu-politlenek propylenu-politlenek etylenu jako miękką matrycę oraz chlorek żelaza(III) i sześciowodny azotan(V) niklu(II) jako prekursory nanocząstek. Zsyntezowane kompozyty karbonizowano w trzech temperaturach: 700 oC, 850 oC i 1000 C. Analizy XRD i TGA wykazały obecność nanocząstek zawierających żelazo i nikiel (poniżej 2% wag.) w postaci Fe3C, Ni i NiH w matrycy węglowej. Adsorpcja azotu, dyfrakcja promieniowania rentgenowskiego (XRD) i spektroskopia Ramana wykazały dobre adsorpcyjne i strukturalne właściwości badanych kompozytów, obejmujące dużą powierzchnię właściwą i dużą całko-witą objętość porów z przeważającym udziałem mezoporów o wymiarach ok. 10 nm. Takie właściwości strukturalne oraz fakt, że otrzymane kompozyty są trwałe termicznie do temperatury 460÷480 C powodują, że materiały te są bardzo atrakcyjne do zastosowań w procesach adsorpcji i katalizy w inżynierii środowiska.
Mesoporous carbon composites containing iron or nickel were successfully synthesized by the soft-templating method under acidic conditions using phloroglucinol and formaldehyde as carbon precursors, the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer as a soft template, and iron(III) chloride or nickel(II) nitrate hexahydrate as nanoparticles precursors. The as-synthesized composites were carbonized at three different temperatures: 700 oC, 850 oC and 1000 oC. XRD and thermogravimetric analysis revealed the presence of Fe- and Ni-containing nanoparticles (below 2 wt.%) in the form of Fe3C, Ni and NiH in the resulting mesoporous carbons. Nitrogen adsorption, X-ray diffraction and Raman spectroscopy proved good adsorption and structural properties of the composites studied, which include high surface area and large total pore volume, with main contribution arising from mesopores with diameters of about 10 nm. The latter and the fact that the resulting composites are stable up to 460-480 oC make them attractive materials for adsorption, catalysis, environmental and energy-related applications.
Źródło:
Ochrona Środowiska; 2011, 33, 2; 3-9
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fuzzy logic in indoor position determination system
Autorzy:
Socha, M.
Górka, W.
Kostorz, I.
Powiązania:
https://bibliotekanauki.pl/articles/375840.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
WiFi
indoor location
fuzzy sets
Opis:
The article outlines how to use the convergence of collections to determine the position of a mobile device based on the WiFi radio signal strength with the use of fuzzy sets. The main aim is the development of the method for indoor position determination based on existing WiFi network infrastructure indoors. The approach is based on the WiFi radio infrastructure existing inside the buildings and requires operating mobile devices such as smartphones or tablets. An SQL database engine is also necessary as a widespread data interface. The SQL approach is not limited to the determination of the position but also to the creation of maps in which the system dening the position of the mobile device will operate. In addition, implementation issues are presented along with the distribution of the burden of performing calculations and the benets of such an approach for determining the location. The authors describe how to decompose the task of determining the position in a client-server architecture.
Źródło:
Theoretical and Applied Informatics; 2015, 27, 2; 1-15
1896-5334
Pojawia się w:
Theoretical and Applied Informatics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties and Structure of Nanocrystalline Layers Obtained by Manual Metal Arc Welding (MMA)
Autorzy:
Górka, J.
Czupryński, A.
Adamiak, M.
Powiązania:
https://bibliotekanauki.pl/articles/351150.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanocrystalline layer
crystallite size
manual metal arc welding
deposit weld
Opis:
The present paper is the result of the investigations of the properties and structure of nanocrystalline layers deposited from iron-based nanoalloy on steel S355N substrate by manual metal arc welding method (MMA). In the process of welding a 100 A current intensity was used with desiccation preheating at 80°C while maintaining the interpass temperature at range of 200°C. The resultant deposit welds were subjected to macro and microscopic metallographic examination, X-ray phase analyses and crystallite size was analyzed by X-ray diffractometry (XRD), additionally EDX chemical composition analysis of precipitates during scanning electron microscopy was performed. Working properties of the obtained nanocrystalline deposit welds were evaluated based on hardness and metal-to-mineral abrasive wear. The results of the deposit welds working properties measurements were compared with the properties of wear resistant steel HARDOX 400 type used as the reference material.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1479-1484
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synteza i właściwości adsorpcyjne koloidalnie odwzorowanych nanoporowatych węgli otrzymanych z kopolimeru chlorku winylidenu i chlorku winylu (Saranu)
Synthesis and adsorption properties of colloid-templated nanoporous carbons obtained using vinylidene and vinyl chloride copolymer (Saran)
Autorzy:
Choma, J.
Jaroniec, M.
Zawiślak, A.
Górka, J.
Powiązania:
https://bibliotekanauki.pl/articles/236510.pdf
Data publikacji:
2009
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
adsorpcja
synteza
krzemionka koloidalna
Saran
kopolimer
adsorption
synthesis
colloidal silica
copolymer
Opis:
W pracy zaproponowano prostą syntezę mikro- i mikro-mezoporowatego węgla z wykorzystaniem koloidalnej krzemionki o wymiarach ok. 24 nm i kopolimeru chlorku winylidenu i chlorku winylu (Saranu) jako prekursora węglowego. W celach porównawczych z samego kopolimeru, bez dodatku koloidalnej krzemionki, otrzymano całkowicie mikroporowaty materiał węglowy. Otrzymany z udziałem krzemionki koloidalnej węgiel mikro-mezoporowaty miał powierzchnią właściwą ok. 850 m2/g, natomiast węgiel mikroporowaty - ok. 1000 m2/g. Udział objętości mikro- i mezoporów stanowił po 50% całkowitej objętości porów węgla mikro-mezoporowatego, matomiast w wypadku węgla mikroporowatego udział mikroporów stanowił blisko 100% całkowitej objętości porów. O ile wymiar mikroporów w obu węglach wynosił ok. 1 nm, o tyle duże, jednorodne, sferyczne mezopory w węglu mikro-mezoporowatym miały wymiar ok. 25 nm, zgodny z wymiarem krzemionki koloidalnej użytej w procesie syntezy tego materiału. Pomiary adsorpcji azotu wykazały, że mezopory były połączone ze sobą i w związku z tym dostępne w procesie adsorpcji tego gazu. Ponadto wykazano, że dobrze rozwinięta mikroporowatość węgla powstała podczas procesu karbonizacji w wyniku termicznego rozkładu kopolimeru (Saranu). Wydaje się, że zaproponowaną metodę można wykorzystać do produkcji mikro-mezoporowatych węgli na skalę techniczną.
A simple strategy is proposed for the synthesis of microporous and micro-mesoporous carbons by using colloidal silica (approx. 24 nm in diameter; hard template) and the vinylidene and vinyl chloride copolymer (Saran) as a carbon precursor. For the purpose of comparison, microporous carbon was obtained from the copolymer alone, with no addition of colloidal silica. When colloidal silica was added, the micro-mesoporous carbon obtained via this route exhibited a specific surface area approaching 850 m2/g, whereas the microporous carbon had a surface area of approx. 1000 m2/g. The micropore and mesopore volumes accounted for about 50% each to the total pore volume of the micro-mesoporous carbon; as for the microporous carbon, the micropore volume was close to 100% of the total pore volume. In both the carbons, the size of micropores approached 1 nm. In the micro-mesoporous carbon the uniform and spherical mesopores were approx. 25 nm in size, which coincided with the size of the colloidal silica used for the synthesis of this material. Nitrogen adsorption measurements have shown that the mesopores were interconnected and accessible to the molecules of this gas in the course of the process. Moreover, it has been demonstrated that the well-developed microporosity was formed during carbonization due to the thermal decomposition of the copolymer (Saran). Apparently, the method proposed can be used for large-scale preparation of micro-mesoporous carbons.
Źródło:
Ochrona Środowiska; 2009, 31, 1; 3-7
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prędkości rowerzystów na wydzielonych drogach rowerowych
Reserch on the speed of cyclist for various infrastructure solutions
Autorzy:
Buda, M.
Bronowska, O.
Górka, A.
Krukowicz, T.
Powiązania:
https://bibliotekanauki.pl/articles/311593.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
ruch rowerzystów
organizacja ruchu rowerowego
infrastruktura rowerowa
pomiar prędkości
przejazd rowerowy
bezpieczeństwo rowerzystów
cycling cyclists
organization of cycling
cycling infrastructure
speed measurement
Opis:
Artykuł przedstawia wyniki badań prędkości rowerzystów dla różnych rozwiązań infrastrukturalnych. Badania przeprowadzono w jedenastu lokalizacjach o nawierzchni asfaltowej, na pasach ruchu na jezdni, ciągach pieszo rowerowych, kontrapasach, wydzielonych ścieżkach rowerowych oraz na pasie ruchu dla autobusów. Przeanalizowano także prędkość rowerzystów na ścieżce rowerowej o nawierzchni z kostki brukowej oraz prędkości na pasie rowerowym o dużym pochyleniu wzdłużnym. Szczegółowe wyniki pomiarów przedstawiono w podziale na kategorie wiekowe, płeć i rodzaj roweru.
The article presents the results of research on cycling speed on various infrastructure solutions. The measurements were taken in 13 different locations: on road lanes, bicycle counterflow lanes, isolated paths and bus lanes. Additional research were made on bike paths with paving surface and on bicycle lane where a 6.3% gradient exists Results are presented as average speed and quantile to of the order of 0.15 and are separated by age group and bike type.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 12; 46-50, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study of Susceptibility and Evaluation of Causes of Cracks Formation in Braze-Weld Filler Metal in Lap Joints Aluminum – Carbon Steel Made with Use of CMT Method and High Power Diode Laser
Autorzy:
Adamiak, M.
Wyględacz, B.
Czupryński, A.
Górka, J.
Powiązania:
https://bibliotekanauki.pl/articles/958197.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
braze-welding
intermetallic compound phase
high power diode laser
brazing
Opis:
In this article results of studies on cracks formation susceptibility in braze-welded joints of thin aluminum sheets and double-sided zinc galvanized steel sheets for car body parts made by laser brazing with high power diode laser ROFIN DL 020 and CMT MIG-brazing, with filler material in form of powder and wire accordingly, were presented. Optimal welding parameters were determined by visual acceptance criteria. On joints made with optimal parameters further examinations were carried. Results of macro- and microscopic metallographic examinations, structural roentgenography, EDS microanalysis and hardness tests were presented. Causes of brittle intermetallic Fe-Al phases formation in Al-matrix filler metal in dissimilar aluminum – zinc plated carbon steel joints were pointed.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 2113-2123
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing of flame sprayed Al2O3 matrix coatings containing TiO2
Autorzy:
Czupryński, A.
Górka, J.
Adamiak, M.
Tomiczek, B.
Powiązania:
https://bibliotekanauki.pl/articles/356108.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
flame spray process
coating
ceramic powder
abrasive wear resistance
erosion wear resistance
adhesion strength
Opis:
The paper presents the results of the properties of flame sprayed ceramic coatings using oxide ceramic materials coating of a powdered aluininiuni oxide (Al2O3) matrix with 3% titanium oxide (TiO2) applied to unalloyed S235JR grade structural steel. A primer consisting of a metallic Ni-Al-Mo based powder has been applied to plates with dimensions of 5X200X300 mm and front surfaces of ø40x50 mm cylinders. Flame spraying of primer coating was made using a RotoTec 80 torch, and an external coating was made with a CastoDyn DS 8000 torch. Evaluation of the coating properties was conducted using metallographic testing, phase composition research, measurement of microhardness, substrate coating adhesion (acc. to EN 582:1996 standard), erosion wear resistance (acc. to ASTM G76-95 standard), and abrasive wear resistance (acc. to ASTM G65 standard) and thermal impact. The testing performed has demonstrated that flame spraying with 97% Al2O3 powder containing 3% TiO2 performed in a range of parameters allows for obtaining high-quality ceramic coatings with thickness up to ca. 500 μni on a steel base. Spray coating possesses a structure consisting mainly of aluminium oxide and a small amount of NiAl10O16 and NiAl32O49 phases. The bonding primer coat sprayed with the Ni-Al-Mo powder to the steel substrate and external coating sprayed with the 97%Al2O3 powder with 3% TiO2 addition demonstrates mechanical bonding characteristics. The coating is characterized by a high adhesion to the base amounting to 6.5 MPa. Average hardness of the external coating is ca. 780 HV. The obtained coatings are characterized by high erosion and abrasive wear resistance and the resistance to effects of cyclic thermal shock.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 3; 1363-1370
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetometria jako narzędzie do oceny zanieczyszczeń środowiska
Magnetometry as a tool to evaluate the environmental pollution
Autorzy:
Gorka-Kostrubiec, B.
Krol, E.
Teisseyre-Jelenska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2084284.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Warszawski. Wydział Geografii i Studiów Regionalnych
Tematy:
srodowisko
zanieczyszczenia srodowiska
ocena zanieczyszczen
narzedzia
magnetometria terenowa
podatnosc magnetyczna
Warszawa
powietrze atmosferyczne
gleby
Opis:
This paper presents the use of magnetometry to study pollution of soil and air. The magnetic method consists in determining the magnetic properties of pollution floating in the air and deposited in the soil, the leaves of trees or household dust in apartments. The method based on the fact that the magnetic particles present in the pollution are associated with heavy metals and toxic trace elements harmful to human health. The study of traffic pollution was focused on the spatial distribution of pollution in soils along roads in relation to the distance from the edge of road, the area topography and the factors affecting the speed of motor transport (traffic lights, traffic jams, road narrowing, etc.). The study of air pollution allowed to determine the seasonal correlation between pollution deposited on filters and meteorological parameters such as temperature, humidity and precipitation. Detailed analysis of magnetic susceptibility as an indicator of pollution revealed increasing trend with temperature and absolute humidity in the cold months of the year and the decreasing trend in the warm months. Similar correlations were not observed between the magnetic susceptibility and the precipitation. The second part presents a study of indoor air pollution based on measurements of dust collected in apartments in different districts of Warsaw. It was found that floor on which dust was taken did not affect the amount and composition of pollution in opposite to vehicle traffic, housing density and way of ventilation. Study shows that the most polluted apartments are in the Center, in the district of Praga Południe, Mokotów and Ursynów located close to the narrow streets with the large vehicle traffic and poor ventilation. Correlation of the magnetic susceptibility with the concentration of heavy metals in household dust is the base for use of susceptibility for monitoring indoor air pollution.
Źródło:
Prace i Studia Geograficzne; 2013, 51; 17-28
0208-4589
Pojawia się w:
Prace i Studia Geograficzne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Otrzymywanie i właściwości adsorpcyjne mezoporowatych węgli z nanocząstkami ditlenku tytanu
Synthesis and adsorption properties of mesoporous carbons with titania nanoparticles
Autorzy:
Choma, J.
Jaroniec, M.
Górka, J.
Jedynak, K.
Powiązania:
https://bibliotekanauki.pl/articles/209835.pdf
Data publikacji:
2011
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
kompozyty węglowe
mezoporowate kompozyty węglowe
nanocząstki ditlenku tytanu
metoda twardego i miękkiego odwzorowania
adsorpcja azotu
struktura porowata
carbon composites
mesoporous carbon composites with titania nanoparticles
hard and soft templating
nitrogen adsorption
porous structure
Opis:
Opisano sposób otrzymywania mezoporowatych węgli i kompozytów węglowych z nanocząstkami ditlenku tytanu. Wykorzystano metodę twardego odwzorowania, w której stałą matrycą były nanocząstki koloidalnej krzemionki o wymiarach ok. 24 nm oraz metodę miękkiego odwzorowania, w której matrycą były cząsteczki kopolimeru trójblokowego politlenku etylenu - politlenku propylenu - politlenku etylenu EO101PO56EO101 Lutrol F127. W metodzie twardego odwzorowania prekursorem węglowym była żywica fenolowo-paraformaldehydowa, natomiast w metodzie miękkiego odwzorowania żywica rezorcynowo-formaldehydowa. Kompozyty węglowe z ditlenkiem tytanu zawierały 10 i 20% wag. TiO₂. Badano właściwości adsorpcyjne węgli i kompozytów węglowo-tytanowych za pomocą niskotemperaturowej adsorpcji azotu w celu wyznaczenia porowatości i pola powierzchni tych materiałów. Otrzymane mezoporowate węgle i kompozyty węglowo-tytanowe charakteryzowały się całkowitą powierzchnią właściwą zmieniającą się w przedziale od 1300 do 331 m²/g oraz całkowitą objętością porów, zmieniającą się w przedziale od 4,26 do 0,63 cm³/g. Stwierdzono, że 10 lub 20% wag. dodatek TiO₂ do mezoporowatych węgli powoduje zmniejszenie pola powierzchni właściwej oraz objętości porów w stosunku to analogicznych próbek nie posiadających nanocząstek ditlenku tytanu. Otrzymane materiały węglowe cechują się dużym udziałem mezoporowatości w całkowitej objętości porów zmieniającym się od 73 do 96%.
Synthesis of mesoporous carbons and carbon composites with titania nanoparticles is reported. The methods of hard and soft templating were employed using colloidal silica and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) EO101PO56EO101, Lutrol F127 as hard and soft templates, respectively. Phenol and formaldehyde were used as carbon precursors in hard templating, while resorcinol and formaldehyde were used in soft templating. The carbon composites with titania nanoparticles contained 10 and 20wt.% of titania. Adsorption properties of carbons and titania-carbon composites such as porosity and surface area were determined from low temperature nitrogen adsorption isotherms. The resulting carbons and titania-carbon composites were characterized by specific surface area ranging from 1300 to 331 m²/g and total pore volume ranging from 4.26 to 0.63 cm³/g. It is shown that the addition of 10 and 20 wt.% of titania into mesoporous carbons caused reduction of the surface area and pores volume in comparison to analogous samples without titania nanoparticles. Also, the materials studied featured a high contribution of mesopores in the total pore volume ranging from 73 to 96%.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2011, 60, 2; 265-283
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synteza i właściwości mezoporowatych węgli z cząstkami złota
Synthesis and Properties of mesoporous carbons with gold particles
Autorzy:
Choma, J.
Jedynak, K.
Górka, J.
Marszewski, M.
Jaroniec, M.
Powiązania:
https://bibliotekanauki.pl/articles/237371.pdf
Data publikacji:
2011
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
mezoporowate materiały kompozytowe
synteza
miękkie odwzorowanie
kopolimer blokowy
cząstki złota
adsorpcja
XRD
SEM
mesoporous composite materials
synthesis
soft-template
block copolymer
gold particles
adsorption
Opis:
Przebadano mezoporowate kompozyty polimerowe i węglowe z cząstkami złota, otrzymane metodą miękkiego odwzorowania w środowisku kwasowym stosując rezorcynol i formaldehyd, jako prekursory węglowe, trójblokowy kopolimer Lutrol F127, jako miękką matrycę oraz kwas tetrachlorozłotowy, jako źródło cząstek metalicznego złota. Wprowadzono stosunkowo duże (10% wag. i 20% wag.) ilości cząstek metalicznego złota do matrycy węglowej. Pomimo to, że obecność nieporowatych cząstek złota o dużej masie pogarsza właściwości adsorpcyjne mezoporowatych kompozytów polimerowo-złotych i węglowo-złotych, wykazano, że pogorszenie to nie było tak duże, jak to ilustrują zmiany powierzchni właściwej od 300 m2/g do ponad 800 m2/g, objętości porów od ok. 0,4 cm3/g do ponad 0,7 cm3/g i średniego wymiaru mezoporów ok. 7 9 nm. Wyniki badań szerokokątowego rozpraszania promieniowania rentgenowskiego (XRD) dowiodły obecności cząstek metalicznego złota w matrycy polimerowej i węglowej, natomiast zdjęcia ze skaningowej mikroskopii elektronowej (SEM) wykazały znaczne zróżnicowanie kształtów i wymiarów cząstek złota. Stwierdzono, że dobrze rozwinięta struktura porowata kompozytów polimerowo-złotych i węglowo-złotych stwarza możliwość wykorzystania tych materiałów w specyficznych procesach adsorpcyjnych i katalitycznych w inżynierii środowiska.
The materials under study were mesoporous polymer and carbon composites with gold particles, obtained by soft templating under acidic conditions, with resorcinol and formaldehyde as carbon precursors, Lutrol F127 as a soft template, and tetrachloroauric acid as a gold source. Two different, relatively large (10 and 20 wt.%) portions of gold were embedded into the carbon matrix. Although the presence of nonporous gold particles of a large mass deteriorates the adsorption properties of mesoporous polymer-gold and carbon-gold composites, it has been found that the deterioration was not drastic, as can be inferred from the range of changes in surface area (from 300 to 800 m2/g), pore volume (from approx. 0.4 to more than 0.7 cm3/g) and average pore width (from approx. 7 to 9 nm). Wide-angle powder X-ray dif-fraction (XRD) patterns have confirmed the presence of gold particles in polymer and carbon composites. Scanning electron microscopy (SEM) images have revealed noticeable differences in the size and shape of the gold particles. The well-developed porous structure of the polymer-gold and carbon-gold composites studied offers opportunities for the application of those ma-terials to specific adsorption and catalytic processes used in environmental engineering.
Źródło:
Ochrona Środowiska; 2011, 33, 3; 3-8
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Własności i struktura nanokrystalicznych warstw napawanych w odniesieniu do wybranych materiałów konstrukcyjnych odpornych na zużycie ścierne
Evaluation of the properties and structure of nanocrystalline surface layers in relation to selected constructional materials resistant to abrasive wear
Autorzy:
Górka, J.
Czupryński, A.
Adamiak, M.
Kopyść, A.
Powiązania:
https://bibliotekanauki.pl/articles/115089.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
zużycie ścierne
warstwa nanokrystaliczna
płyta trudnościeralna
napoina
abrasive wear
nanocrystalline layer
abrasion plate
deposit weld
Opis:
W pracy przedstawiono własności i strukturę warstw nanokrystalicznych wykonanych łukowo metodą MMA nanostopem na osnowie żelaza na podłożu ze stali S355N w porównaniu do wybranych materiałów konstrukcyjnych odpornych na ścieranie stosowanych obecnie w przemyśle. Uzyskane napoiny poddano badaniom metalograficznym makro i mikroskopowym, określono wielkość ziarna z wykorzystaniem dyfraktometru rentgenowskiego Xpert PRO X-rey. Oceny własności użytkowych uzyskanych warstw nanokrystalicznych w porównaniu do obecnie stosowanych materiałów dokonano w oparciu o pomiar twardości oraz badania zużycia ściernego typu metal-minerał. Wyniki własności eksploatacyjnych warstw odniesiono do własności stali HARDOX 400.
The present paper is the result of the investigations of the properties and structure of nanocrystalline layers deposited from iron-based nanoalloy on steel S355N substrate by manual metal arc welding method (MMA) compared to selected abrasion-resistant construction materials currently used in industry. The resultant deposit welds were subjected to macro and microscopic metallographic examination. Working properties of obtained nanocrystalline deposits weld compared to currently used materials were evaluated based on the hardness, abrasive wear of metal-to-mineral. The results of deposits weld working properties measurements were compared with property of wear resistant steel HARDOX 400 type used as reference material.
Źródło:
Welding Technology Review; 2018, 90, 9; 19-23
0033-2364
2449-7959
Pojawia się w:
Welding Technology Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synteza uporządkowanych mezoporowatych węgli metodą miękkiego odwzorowania z użyciem azotanu żelaza
Soft-templating synthesis of mesoporous carbons in the presence of iron(III) nitrate
Autorzy:
Choma, J.
Jedynak, K.
Górka, J.
Jaroniec, M.
Powiązania:
https://bibliotekanauki.pl/articles/236618.pdf
Data publikacji:
2013
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
mesoporous carbon
adsorption
porosity
miękkie odwzorowanie
adsorpcja
porowatość
Opis:
Soft-templating synthesis of mesoporous carbons was carried out in the presence of iron(III) nitrate by using resorcinol and formaldehyde as carbon precursors and Lutrol F127 (EO101PO 56EO101) block copolymer as a soft template. Iron(III) salt was used as a precursor for the formation of iron-containing particles and a low temperature graphitization catalyst. The resulting composites possessed high specific surface area (587 m2/g and 440 m2/g), large pore volume (0.44 cm3/g and 0.35 cm3/g) and mesoporosity of about 65%. Examination of their pore size distributions indicated presence of micropores of about 1.6 nm in size and mesopores of about 8 nm in size. Small angle X-ray diffraction pattern recorded for carbon sample prepared by using 10wt% iron(III) solution featured one distinct peak, possibly an indication of the ordered mesostructure. Thermogravimetric analysis indicated that only about 50% of iron used was successfully incorporated into these carbons, which resulted in the presence of metallic iron and iron carbide nanoparticles. Also, it was found out that iron presence during the carbonisation process contributed to the partial graphitization of amorphous carbon mesostructure. High specific surface area, well developed porosity and magnetic properties of these carbons extend their potential in adsorption, catalytic and energy-related applications.
Zsyntezowano metodą miękkiego odwzorowania mezoporowate węgle w obecności azotanu(V) żelaza(III), używając rezorcynol i formaldehyd jako prekursory węglowe oraz kopolimer trójblokowy Lutrol F127 (EO101PO 56EO101) jako miękką matrycę. Roztwór soli żelaza(III) użyto jako źródło nanocząstek żelaza oraz jako niskotemperaturowy katalizator grafityzacji. Otrzymane dwa kompozyty charakteryzowały się dużą powierzchnią właściwą (587 m2/g i 440 m2/g) oraz dużą objętością porów (0,44 cm3/g i 0,35 cm3/g), w których udział objętości mezoporów wynosił ok. 65%. Badanie funkcji rozkładu objętości porów wykazało obecność mikroporów o wymiarach około 1,6 nm i mezoporów o wymiarach około 8 nm. Wyraźny pik na małokątowym widmie rozpraszania promieniowania rentgenowskiego uzyskany w przypadku próbki węgla otrzymanej przy użyciu 10% wag. żelaza(III) wskazuje na możliwą obecność uporządkowanej struktury. Badania termograwimetryczne wykazały, że jedynie około 50% użytego żelaza udało się wprowadzić do struktury tych węgli, czego wynikiem była obecność nanocząstek żelaza i węgliku żelaza. Ponadto stwierdzono, że obecność żelaza w procesie karbonizacji przyczyniła się do częściowej grafityzacji amorficznej mezostruktury węgli. Duża powierzchnia właściwa, dobrze rozwinięta struktura porowata oraz właściwości magnetyczne tych węgli zwiększają ich potencjał w adsorpcji, katalizie oraz zastosowaniach odnoszących się do przetwarzania energii.
Źródło:
Ochrona Środowiska; 2013, 35, 2; 3-8
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morfologia i właściwości adsorpcyjne mezoporowatych węgli z nanocząstkami srebra
Morphology and adsorption properties of mesoporous carbons with silver nanoparticles
Autorzy:
Choma, J.
Jedynak, K.
Górka, J.
Jaroniec, M.
Powiązania:
https://bibliotekanauki.pl/articles/236776.pdf
Data publikacji:
2011
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
adsorpcja
XRD
SEM
synteza
nanocząstki srebra
miękkie odwzorowanie
kopolimer trójblokowy
adsorption
synthesis
nanoparticles
silver
block copolymer
Opis:
Z powodzeniem zsyntezowano, metodą miękkiego odwzorowania, mezoporowate węgle zwierające nanocząstki srebra wykorzystując rezorcynol i formaldehyd, jako prekursory węglowe, oraz kopolimer trójblokowy Lutrol F127 (EO101PO56EO101), jako miękką matrycę. Nanocząstki srebra o wymiarach ok. 90 nm, w dwóch różnych ilościach (10% wag. i 20% wag.) wprowadzono do matrycy węglowej. Ostateczne kompozytowe materiały węglowo-srebrowe charakteryzowały się dużą powierzchnią właściwą (ok. 650 m2/g) oraz dużą całkowitą objętością porów (ok. 0,55 cm3/g), w której udział objętości mezoporów wynosił ok. 70%. Funkcje rozkładu objętości porów wykazały obecność mikro-porów o wymiarach ok. 2 nm i mezoporów o wymiarach ok. 6 nm. Zdjęcia ze skaningowej mokroskopii elektronowej wskazały heterogeniczność wymiarów nanocząstek srebra zawartych w strukturze węglowej kompozytów węglowo-srebrowych. Stwierdzono występowanie zarówno pojedynczych, jak i zaglomerowanych nanocząstek srebra o różnych kształtach i wymiarach od 50 nm do kilkuset nanometrów. Wykazano, że dobrze rozwinięta struktura porowata kompozytowych materiałów węglowych z osadzonymi w nich nanocząstkami srebra stwarza realną możliwość ich wykorzystania w wielu procesach katalitycznych i adsorpcyjnych, ze szczególnym uwzględnieniem procesów uzdatniania wody.
Soft-templated mesoporous carbons were successfully synthesized in the presence of silver nanoparticles, using resorcinol and formaldehyde as carbon precursors and triblock copolymer Lutrol F127 (EO101PO56EO101) as a soft template. Two different loadings of ~90 nm silver nanoparticles (10 wt. % and 20 wt. %) were introduced into the carbon framework. The final carbon-silver composite materials exhibited a high surface area (~650 m2/g) and a large total pore volume (~0.55 cm3/g), where mesoporosity accounts for about 70% of the total pore volume. Pore size distribution curves confirm the presence of micropores (~2.0 nm) and mesopores (~6.0 nm). SEM images indicate heterogeneous dispersion of nanoparticles of silver in the carbon structure of carbon-silver composites. The occurrence was detected of differently shaped single and aggregated silver nanoparticles varying in size from ~50 nm to several hundred nanometers. The well-developed porous structure with embedded silver nanoparticles substantiates the applicability of these composite carbon-silver materials in many catalytic and adsorption processes as well as water purification processes.
Źródło:
Ochrona Środowiska; 2011, 33, 1; 3-8
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości adsorpcyjne mezoporowatych węgli z nanocząstkami dwutlenku tytanu otrzymanych w obecności kopolimerów blokowych
Adsorption properties of mesoporous carbons with titania nanoparticles obtained in the presence of block copolymers
Autorzy:
Choma, J.
Jedynak, K.
Górka, J.
Jaroniec, M.
Powiązania:
https://bibliotekanauki.pl/articles/237329.pdf
Data publikacji:
2010
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
adsorpcja
synteza
węgiel mezoporowaty
nanocząstki
dwutlenek tytanu
kopolimer blokowy
adsorption
synthesis
mesoporous carbon
nanoparticles
titania
block copolymer
Opis:
Metodą miękkiego odwzorowania zsyntezowano mezoporowate węgle z wykorzystaniem rezorcynolu i formaldehydu jako prekursorów węglowych w obecności nanocząstek dwutlenku tytanu oraz trójblokowego kopolimeru EO101PO56EO101 jako miękkiej matrycy. Do tych węgli wprowadzono dwie różne ilości (0,05 mol i 0,10 mol) dwutlenku ty-tanu o wymiarach nanocząstek 25 nm. Ponieważ dodanie dwutlenku tytanu zmniejsza właściwości adsorpcyjne materiału kompozytowego, dlatego do mieszaniny reakcyjnej wprowadzono TEOS (tetraetoksysilan), którego dodatek nie zaburza formowania mezofazy, natomiast pozwala rozwinąć dodatkową porowatość po roztworzeniu cząstek krzemionkowych utworzonych z TEOS. Otrzymane materiały kompozytowe miały dużą powierzchnię właściwą ok. 1000 m2/g i dużą całkowitą objętość porów ok. 1 cm3/g, z ok. 75÷80% mezoporowatością w całkowitej objętości porów. Krzywe rozkładu objętości porów potwierdziły obecność mikroporów o wymiarach ok. 2,0÷2,1 nm i mezoporów o wymiarach ok. 6,0÷7,0 nm. Dobrze rozwinięta struktura porowata otrzymanych materiałów węglowych zawierających nanocząstki dwutlenku tytanu wskazuje, że materiały te mogą być z powodzeniem stosowane w procesach katalitycznych i adsorpcyjnych.
The soft-templated mesoporous carbons were successfully synthesized in the presence of titania nanoparticles, with resorcinol and formaldehyde as carbon precursors and triblock copolymer EO101PO56EO101 as a soft template. Two different loadings of 25 nm titania nanoparticles (0.05 or 0.10 mol) were introduced into the carbon framework. Since titania addition lowers the adsorption volume of the composite materials, the reaction mixture was supplied with TEOS (tetraethyl orthosilicate). Its addition improves porosity by removing the TEOS-generated silica species, without disturbing mesophase formation. The final composite materials exhibit a high surface area (~1000 m2/g) and a large total pore volume (~1 cm3/g), where mesoporosity accounts for ~75-80% of the total pore volume. Pore size distribution curves confirmed the presence of micropores (~2.0-2.1 nm) and mesopores (~6.0-7.0 nm). The well-developed porous structure with embedded titania nanoparticles substantiates the applicability of these composite materials in many catalytic and adsorption processes.
Źródło:
Ochrona Środowiska; 2010, 32, 4; 3-9
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Joining of the AMC Composites Reinforced with Ti3Al Intermetallic Particles by Resistance Butt Welding
Autorzy:
Adamiak, M.
Tomiczek, B.
Górka, J.
Czupryński, A.
Powiązania:
https://bibliotekanauki.pl/articles/353835.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite materials
intermetallics
Ti3Al
resistance butt welding
mechanical properties
Opis:
The introduction of new reinforcing materials continues to be investigated to improve the final behaviour of AMCs as well as to avoid some drawbacks of using ceramics as reinforcement. The present work investigates the structure, properties and ability of joining aluminium EN-AW 6061 matrix composite materials reinforced with Ti3Al particles by resistance butt welding as well as composite materials produced by mechanical milling, powder metallurgy and hot extrusion techniques. Mechanically milled and extruded composites show finer and better distribution of reinforcement particles, which leads to better mechanical properties of the obtained products. Finer microstructure improves mechanical properties of obtained composites. The hardness increases twice in the case of mechanically milled composites also, a higher reinforcement content results in higher particle dispersion hardening, for 15 wt.% of intermetallics reinforcement concentration composites reach about 400 MPa UTS. Investigation results of joints show that best hardness and tensile properties of joints can be achieved by altering soft conditions of butt welding process e.g. current flow time 1.2 s and current 1400 A. To improve mechanical properties of butt welding joints age hardening techniques can also be used.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 847-852
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Termodynamiczna charakterystyka właściwości adsorpcyjnych nanoporowatych węgli otrzymywanych przy użyciu twardych i miękkich matryc
Thermodynamic characterization of adsorption properties of nanoporous carbons obtained by hard and soft templating
Autorzy:
Choma, J.
Jaroniec, M.
Górka, J.
Jedynak, K.
Powiązania:
https://bibliotekanauki.pl/articles/209379.pdf
Data publikacji:
2009
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
nanoporowate węgle
twarde i miękkie odwzorowanie
funkcja rozkładu potencjału adsorpcyjnego
całkowita powierzchnia właściwa
nanoporous carbons
hard and soft templating
adsorption potential distribution
total surface area
Opis:
Izotermy adsorpcji azotu wykorzystano do badania struktury porowatej węgli otrzymanych metodą twardego i miękkiego odwzorowania. Parametry strukturalne obliczano na podstawie izoterm adsorpcji azotu wyznaczając powierzchnię właściwą BET, całkowitą objętość porów, objętość mikroporów i mezoporów jak również funkcję rozkładu objętości porów uzupełnione analizą funkcji rozkładu potencjału adsorpcyjnego zapewniającą lepszą charakterystykę nanoporowatych węgli. Pokazano, że dla węgli o dużych powierzchniach właściwych funkcja rozkładu potencjału adsorpcyjnego (APD) daje znacznie lepsze wartości pola powierzchni niż metoda BET dlatego, że APD jest funkcją termodynamiczną niezależną od modelu adsorpcji. Metoda BET przeszacowuje powierzchnię właściwą dla wysoce mikroporowatych węgli, natomiast w innych przypadkach obie metody dają podobne wyniki.
Nitrogen adsorption isotherms have been used to study the porous structure of carbons obtained by hard and soft templating method. The structural parameters calculated from nitrogen adsorption isotherms, such as the BET surface area, total pore volume, volumes of micropores and mesopores as well as pore size distribution supplemented by analysis of adsorption potential distribution provide better characteristics of nanoporous carbons. It is shown that for high surface area carbons, the adsorption potential distribution (APD) method gives much better result than the BET method because APD is a model - independent thermodynamic function. The BET method overestimates the surface area for highly microporous carbons, however, for the remaining cases both methods give similar results.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2009, 58, 4; 249-262
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of Magnetic Hyperfine Field Distribution for Spherical Nanoparticles of bcc Structure
Autorzy:
Szumiata, T.
Gzik-Szumiata, M.
Brzózka, K.
Gawroński, M.
Górka, B.
Powiązania:
https://bibliotekanauki.pl/articles/1813877.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.67.Bf
76.80.+y
Opis:
We propose a simple model for temperature evolution of magnetic hyperfine field distribution of spherical bcc Fe nanoparticles. We performed mean field approximation calculations of mean spin value in each spherical shell of nanoparticle. Considering magnetic hyperfine field values reported for iron thin films we predicted possible values of hyperfine fields in the internal and surface region of the particles as a function of temperature.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 537-540
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diode Laser Surface Alloying of Armor Steel with Tungsten Carbide
Autorzy:
Janicki, D.
Górka, J.
Kwaśny, W.
Gołombek, K.
Kondracki, M.
Żuk, M.
Powiązania:
https://bibliotekanauki.pl/articles/351086.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
laser surface alloying
diode laser
armor steel
metal matrix composite
tungsten carbide
Opis:
Metal matrix composite (MMC) surface layers reinforced by WC were fabricated on armor steel ARMOX 500T plates via a laser surface alloying process. The microstructure of the layers was assessed by scanning electron microscopy and X-ray diffraction. The surface layers having the WC fraction up to 71 vol% and an average hardness of 1300 HV were produced. The thickness of these layers was up to 650 μm. The addition of a titanium powder in the molten pool increased the wettability of WC particles by the liquid metal in the molten pool increasing the WC fraction. Additionally, the presence of titanium resulted in the precipitation of the (Ti,W)C phase, which significantly reduced the fraction of W-rich complex carbides and improved a structural integrity of the layers.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2A; 473-481
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chemical, magnetic and Mössbauer effect analysis of road dust from expressway
Autorzy:
Szumiata, T.
Gawroński, M.
Górka, B.
Brzózka, K.
Świetlik, R.
Trojanowska, M.
Strzelecka, M.
Powiązania:
https://bibliotekanauki.pl/articles/147916.pdf
Data publikacji:
2013
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
road dusts
environmental dusts
flame spectrometry
Mössbauer spectrometry
magnetic susceptibility
Opis:
Environmental dusts of urban and industrial origin are one of the most important factors responsible for air and soil pollution - mainly because of heavy metals content. In this work a dust collected from the acoustic barriers of E-77 expressway (Poland) has been investigated. Chemical analysis was performed by means of atomic absorption spectrometer with flame atomization (F-AAS). Fe, Al and Zn metals dominate in the investigated road dusts. Mossbauer spectra collected at room temperature enabled the identification of several iron-containing phases in the dust. Some traces of hematite and magnetite have been found as well as alfa-Fe phase in ferromagnetic state. A significant component could be interpreted as pure iron in paramagnetic state. The dominating doublet in the spectrum of high quadrupole splitting could correspond to iron carbonates. Complementary measurements of low-field AC magnetic susceptibility confirmed a different metal content in the road dust samples collected from different altitudes of acoustic barriers.
Źródło:
Nukleonika; 2013, 58, 1; 109-112
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Age-related changes in mRNA expression of selected surface receptors in lymphocytes of dairy calves
Autorzy:
Flaga, J.
Korytkowski, Ł.
Górka, P.
Kowalski, Z.M.
Powiązania:
https://bibliotekanauki.pl/articles/2087753.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
immune system development
clusters of differentiation
marker
lymphocyte maturation
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 1; 213-216
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Composition and Magnetic Properties of Nanoperm Thin Films Doped with Yttrium
Autorzy:
Brzózka, K.
Sovák, P.
Szumiata, T.
Górka, B.
Gawroński, M.
Powiązania:
https://bibliotekanauki.pl/articles/1428972.pdf
Data publikacji:
2012-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Bb
75.70.-i
76.80.+y
78.20.Ls
Opis:
Thin films of Nanoperm alloys with partial substitution of iron by yttrium are the subject of investigations. The attention is fixed on the influence of yttrium substitution on structure and magnetic characteristics of the samples. The effect of film thickness is also considered. Conversion electron Mössbauer spectroscopy and magneto-optic Kerr effect were used to derive hyperfine parameters and coercive field, respectively. Coexistence of crystalline bcc-Fe phase and an amorphous one with diverse proportion was stated in most of the samples. It was found that surface and interface regions contribute to the magnetic properties of films.
Źródło:
Acta Physica Polonica A; 2012, 121, 5-6; 1270-1272
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iron-containing phases in fly ashes from different combustion systems
Autorzy:
Szumiata, T.
Gzik-Szumiata, M
Brzózka, K.
Górka, B.
Gawroński, M.
Świetlik, R.
Trojanowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/148055.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
fly ashes
coal combustion
Mössbauer spectrometry
environmental protection
Opis:
The investigations of iron-containing phases existing in fly ashes were performed using transmission Mössbauer spectrometry. The examined samples of fly ashes were collected from different coal combustion systems, that is, stoker-fired boiler in municipal heating plant and pulverized coal boiler in power plant. Several phases are identifi ed in the samples: iron oxides, paramagnetic aluminosilicate glass with Fe3+ ions and Al2O4- -type spinel with Fe2+ ions. It was pointed out that proportions of contents of phases strongly depend not only on the combustion temperature but also on the way of ash collection.
Źródło:
Nukleonika; 2015, 60, 1; 151-154
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie przesiąkalności dla krwi uszczelnianych protez naczyniowych
Investigation of blood permeability through sealed vascular prosthesis
Autorzy:
Gawlikowski, M.
Gorka, K.
Jarosz, A.
Kustosz, R.
Kowalczuk, M.
Adamus, G.
Powiązania:
https://bibliotekanauki.pl/articles/284006.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
protezy naczyniowe
polihydroksymaślan
przesiąkalność
vascular prosthesis
polyhydroxybutyrate
blood permeability
Opis:
Celem zadania badawczego była analiza przesiąkalności dla krwi protez naczyniowych uszczelnianych pochodnymi polihydroksymaślanu (PHB).
The aim of the investigation was blood permeability determination of vascular grafts sealed with polyhydroxybutyrate (PHB) derivates.
Źródło:
Engineering of Biomaterials; 2010, 13, no. 99-101; 24-25
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mössbauer Study of Magnetic Texture of Finemet-Type Ribbons
Autorzy:
Brzózka, K.
Sovák, P.
Górka, B.
Szumiata, T.
Gawroński, M.
Powiązania:
https://bibliotekanauki.pl/articles/1506573.pdf
Data publikacji:
2011-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
76.80.+y
75.50.Kj
81.40.Ef
Opis:
Magnetic texture of amorphous Finemet-type alloys substituted by Co, Ni, Mn, Ge and V was investigated by means of Mössbauer spectroscopy using various angular configurations. Samples in form of ribbons were manufactured by single-roller melt spinning technique. In most of investigated alloys some preference of alignment of atomic magnetic moments in-plane of sample is stated, except of some alloys substituted by germanium in which slight tendency to out-of plane spin orientation is proved.
Źródło:
Acta Physica Polonica A; 2011, 119, 1; 33-36
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of 9-day trekking in the Alps on the level of oxidative stress parameters and blood parameters in native lowlanders
Autorzy:
Krzeszowiak, J.
Zawadzki, M.
Markiewicz-Gorka, I.
Kawalec, A.
Pawlas, K.
Powiązania:
https://bibliotekanauki.pl/articles/49840.pdf
Data publikacji:
2014
Wydawca:
Instytut Medycyny Wsi
Opis:
Background. The stimuli acting on a person in a high mountain environment (such as hypobaric hypoxia with subsequent reoxygenation, physical exercise) can significantly increase oxidative stress, stimulate erythropoiesis, lead to changes in the blood count and participate in the development of altitude sickness. Objective. The aim was to investigate changes in haematological parameters, indicators of oxidative stress (malondialdehyde – MDA) and antioxidant defences: catalase (CAT), superoxide dismutase (SOD), and total antioxidant status (TAS) in the plasma of young, healthy people after a 9-day expedition in the Alps. Materials and method. A total of 5 patients (4 men and 1 woman), members of the Wrocław Mountaineering Club, aged 24–26 years. Collection of blood samples was carried out immediately before departure and 3 days after the end of exposure to high-altitude conditions. During the expedition, the subjects were exposed to heights: 2,050–4,165 m.a.s.l., and exercise associated with climbing. Results. Trekking in the Alps neither caused significant changes in the parameters of red blood cells nor increased the level of oxidative stress parameters in plasma. CAT activity increased, the ratio of SOD / CAT decreased. There was also a decrease in the total number of leukocytes, mainly monocytes and basophils. Conclusions. 9-day exposure to high-altitude conditions is not a substantial burden for the organism of young, physically active people. The increase in antioxidant capacity is sufficient to stop oxidative processes, which are severe in these conditions, and to prevent the occurrence of significant oxidative stress. Discontinuation of exposure to allergens and dust pollution clears the airways, which is indicated by the reduction in the number of monocytes and basophils.
Źródło:
Annals of Agricultural and Environmental Medicine; 2014, 21, 3
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biology, cultivation, and medicinal functions of the mushroom Hericium erinaceum
Autorzy:
Sokol, S.
Golak-Siwulska, I.
Sobieralski, K.
Siwulski, M.
Gorka, K.
Powiązania:
https://bibliotekanauki.pl/articles/67351.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
biology
cultivation
medicinal property
mushroom
Hericium erinaceum
bioactive compound
edible fungi
Opis:
Hericium erinaceum (Bull.: Fr.) Pers. is an edible fungus of great significance in medicine. It is rarely found in Europe, in contrast, it is common in Japan and North America. Its fruitbodies have been well-known for hundreds of years in traditional Chinese medicine and cuisine. A cradle of H. erinaceum cultivation is Asia. In Eastern Europe is rare in natural habitats, but can be successfully cultivated. Both fruitbodies and mycelia are rich in active, health promoting substances. Tests of substances extracted from this mushroom carried out on animals and in vitro have given good results. They can be used in the treatment of cancer, hepatic disorders, Alzheimer’s and Parkinson’s diseases, wound healing. They improve cognitive abilities, support the nervous and immune systems. Promising results have been reported in clinical trials and case reports about the human treatment (e.g., recovery from schizophrenia, an improvement of the quality of sleep, alleviation of the menopause symptoms). The subject of this paper is to summarize information about the development of mycelium, the best conditions for cultivation of fruitbodies, bioactive substances and their use in medicine.
Źródło:
Acta Mycologica; 2015, 50, 2
0001-625X
2353-074X
Pojawia się w:
Acta Mycologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and Magnetic Ordering in Fe-Ga Thin Films Examined by Mössbauer Spectrometry
Autorzy:
Szumiata, T.
Brzózka, K.
Gawroński, M.
Górka, B.
Javed, A.
Morley, N.
Gibbs, M.
Powiązania:
https://bibliotekanauki.pl/articles/1506454.pdf
Data publikacji:
2011-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Bb
75.70.Ak
76.80.+y
Opis:
The detailed analysis of atomic and magnetic structure has been performed by Mössbauer spectroscopy for polycrystalline $Fe_{80}Ga_{20}$ films of different thickness ranging from 20 nm to 200 nm. The films were deposited on Si(100) substrate using dual sputtering and evaporation method. Obtained CEMS spectra have been fitted with several Gaussian distributions of hyperfine magnetic field. The results point to the domination of BCC disordered A2 phase and the absence of $DO_{3}$ and $L1_{2}$ phases in the films. Both hyperfine parameters and lattice constant reveal anomaly for 40 nm thick sample - presumably due to the change of the internal stress. Spin texture evolves from in-plane to out-of-the-plane configuration with increasing thickness.
Źródło:
Acta Physica Polonica A; 2011, 119, 1; 21-23
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of Co and V substitution on structural properties of FINEMET-type alloys
Autorzy:
Szumiata, T.
Gawroński, M.
Brzózka, K.
Górka, B.
Sovák, P.
Pavlík, P.
Powiązania:
https://bibliotekanauki.pl/articles/148217.pdf
Data publikacji:
2007
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
magnetic texture
CEMS
polarized radiation
Opis:
The effect of addition of Co and V on the hyperfine parameters of amorphous as well as nanocrystalline Finemet-type alloys has been studied by means of transmission Mössbauer spectrometry. It was stated that these elements infiltrate into crystalline grains in the course of crystallization, what causes alteration in structure. Different evolution of magnetic hyperfine field is reported in both cases and analyzed. In the series of alloys substituted by vanadium, the substantial paramagnetic component attributed to iron-poor regions in the amorphous remainder was found.
Źródło:
Nukleonika; 2007, 52, supl. 1; 21-28
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of thermal annealing on structure and oxidation of iron nanowires
Autorzy:
Krajewski, M.
Brzózka, K.
Górka, B.
Lin, W.-S.
Lin, H. -M.
Szumiata, T
Gawroński, M.
Wasik, D.
Powiązania:
https://bibliotekanauki.pl/articles/148838.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
amorphous iron and iron oxides
iron nanowires
Mössbauer spectroscopy
Raman spectroscopy
thermal annealing
Opis:
Raman spectroscopy as well as Mössbauer spectroscopy were applied in order to study the phase composition of iron nanowires and its changes, caused by annealing in a neutral atmosphere at several temperatures ranging from 200°C to 800°C. As-prepared nanowires were manufactured via a simple chemical reduction in an external magnetic fi eld. Both experimental techniques proved formation of the surface layer covered by crystalline iron oxides, with phase composition dependent on the annealing temperature (Ta). At higher Ta, hematite was the dominant phase in the nanowires.
Źródło:
Nukleonika; 2015, 60, 1; 87-91
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oszacowanie stabilizacji złamania trzonu kości udowej przez płytkę przykostną przy wykorzystaniu metody elementów skończonych
Estimation of stabilization of femoral shaft fractures by paraosteal plate using finite element method
Autorzy:
Kozień, M. S.
Lorkowski, J.
Górka, I.
Kornaga, M.
Grzegorowska, O.
Kotela, A.
Kotela, I.
Powiązania:
https://bibliotekanauki.pl/articles/283779.pdf
Data publikacji:
2015
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
złamanie
symulacja komputerowa
kość długa
metoda elementów skończonych
analiza naprężeń
fracture
computer simulation
long bone
finite element method
strength analysis
Opis:
Złamania kości długich mogą być leczone na kilka sposobów. Jednym z nich jest zastosowanie płytki przykostnej. Płytka zamocowywana do kości umożliwia przeprowadzenie leczenia, ale z drugiej strony jest źródłem powstawania dodatkowych naprężeń w obszarach gdzie jest ona przytwierdzona do kości za pomocą śrub. Wartości naprężeń zależą od rozmiaru płytki i śrub, miejsca zamocowań oraz obciążeń zewnętrznych działających na kość. Celem pracy było określenie przemieszczeń kości długiej stabilizowanej implantem przykostnym, szczególnie w rejonie złamania. Z uwagi na wykorzystaną metodę analizy przy okazji oszacowano wartości naprężeń występujących w kości. W oparciu o obrazy radiologiczne trzydziestu leczonych chorych, wykonano analizę obciążeń występujących w przypadku złamań o typie poprzecznym i skośnym. Uzyskano potwierdzenie biomechanicznej stabilności złamania przy stabilizacji nawet czasowej co najmniej sześcioma śrubami. Zwiększenie liczby śrub wpływa korzystnie na stabilizację, szczególnie w przypadku złamań skośnych. Liczba śrub jest jednak ograniczona z uwagi na możliwość zniszczenia struktury kości. Symulacja została przeprowadzona metodą elementów skończonych przy zastosowaniu pakietu komputerowego Ansys. Dla uproszczenia analiz oraz w celu przetestowania możliwości wykorzystania uproszczonego podejścia wykorzystany został model płaski. Możliwość zastosowania takiego modelu w analizach uproszczonych wynika z faktu, że najczęściej śruby mocujące płytkę do kości rozmieszczane są wzdłuż jednej linii w przybliżeniu równoległej do osi kości. Wyniki analiz wskazują, że model płaski wydaje się być wystarczająco dokładny do okołooperacyjnej oceny sposobu stabilizacji złamania, mając na uwadze krótki czas potrzebny do zbudowania modelu.
Long bone fractures can be treated in several ways. One of them is using the paraosteal plate. The plate mounted to a bone enables the therapy process, but it can also be a source of extra stresses in the mounting regions. Values of stresses depend on the plates’ and screws’ dimensions, number of screws, the mounting place and external loads acting on the bone. The aim of this paper was to determine displacements of long bone stabilized by the paraosteal implant, especially in the fracture area. Due to applied method of analysis, the stresses value occurring in the bone were also estimated. Based on radiological images of thirty patients, an analysis of transverse and oblique fractures burthen was performed. The biomechanical fracture stabilization by even temporary stabilization with at least six screws was confirmed. Increasing the number of screws affects profitably the stabilization, especially in the case of oblique fractures. Number of screws is limited by possibility of damage of bone’s structure. The simulation was performed using a finite element method and application of the Ansys computer package. In order to simplify the analysis and to test the possibility of reduced attempt application, the plane model was applied. Possibility of application of such a model in simplified analyses is explained by the fact that usually the screws mounting plate to a bone are situated along one line parallel to the line of the bone axis. Results of the analysis show, that the plane model seems to be good enough to preoperative estimation of the way of fracture stabilization due to short time required to creation of the model.
Źródło:
Engineering of Biomaterials; 2015, 18, 130; 20-26
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of Al doping on microstructure and hyperfine interactions in FINEMET
Autorzy:
Brzózka, K.
Szumiata, T.
Gawroński, M.
Górka, B.
Zorkovská, A.
Sovák, P.
Powiązania:
https://bibliotekanauki.pl/articles/147216.pdf
Data publikacji:
2004
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
Mössbauer spectroscopy
FINEMET
nanocrystalline alloys
Al-dopped FINEMET
Opis:
Structure and hyperfine interactions of amorphous and nanocrystalline FINEMET were investigated by means of Mössbauer spectrometry. It was found that substitution of x iron atoms with aluminum ones causes changes in the properties of both amorphous and nanocrystalline alloys as well as in the structure of individual phases. The reduction of hyperfine magnetic field caused by atom substitution is a non-linear function of x, unlike the linear dependence expected because of dilution. Temperature studies reveal a double magnetic phase transition at 250°C and 330°C as well as point to the variety of phases in the examined material.
Źródło:
Nukleonika; 2004, 49,suppl.3; 59-62
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iron-containing phases in metallurgical and coke dusts as well as in bog iron ore
Autorzy:
Szumiata, T.
Rachwał, M.
Magiera, T.
Brzózka, K.
Gzik-Szumiata, M.
Gawroński, M.
Górka, B.
Kyzioł-Komosińska, J.
Powiązania:
https://bibliotekanauki.pl/articles/148303.pdf
Data publikacji:
2017
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
metallurgical dusts
coke dusts
bog ore
phase analysis
Mössbauer spectrometry
magnetic susceptibility
Opis:
Several samples of dusts from steel and coke plants (collected mostly with electro filters) were subjected to the investigation of content of mineral phases in their particles. Additionally, sample of bog iron ore and metallurgical slurry was studied. Next, the magnetic susceptibility of all the samples was determined, and investigations of iron-containing phases were performed using transmission Mössbauer spectrometry. The values of mass-specific magnetic susceptibility varied in a wide range: from 59 to above 7000 × 10−8 m3kg−1. The low values are determined for bog iron ore, metallurgical slurry, and coke dusts. The extremely high was obtained for metallurgical dusts. The Mössbauer spectra and X-ray diffraction patterns point to the presence of the following phases containing iron: hematite and oxidized magnetite (in coke and metallurgical dusts as well as metallurgical slurry), traces of magnetite fi ne grains fraction (in metallurgical dusts), amorphous glassy silicates with paramagnetic Fe3+ and Fe2+ ions, traces of pyrrhotite (in coke dusts), α-Fe and nonstoichiometric wüstite (in metallurgical slurry), as well as ferrihydrite nanoparticles (in bog iron ore). For individual samples of metallurgical dusts, the relative contributions of Fe2+/3+ ions in octahedral B sites and Fe2+ ions in tetrahedral A sites in magnetite spinel structure differs considerably.
Źródło:
Nukleonika; 2017, 62, 2; 187-195
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stress Monitoring in Steel Elements via Detection of AC Magnetic Permeability Changes
Autorzy:
Szumiata, T.
Hibner, K.
Dziewiecki, K.
Mazur, Z.
Gockiewicz, A.
Gzik-Szumiata, M.
Górka, B.
Witoś, M.
Powiązania:
https://bibliotekanauki.pl/articles/1030407.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.80.+q
75.60.Ej
75.50.Bb
75.30.Gw
62.20.D-
Opis:
The influence of mechanical stress on low frequency AC magnetic permeability was studied. The cold-drawn bars with C45 steel were subjected to investigation. The tensile stress (within elastic regime) was applied by means of material testing machine. Simple measuring system was assembled, which consisted of: function generator with magnetizing coil, detection coil and precise AC voltmeter. The registered changes of induced voltage were proportional to the change of magnetic permeability of the stretched rods. The obtained results were almost frequency-independent due to low frequency limit (250-500 Hz, weak eddy currents, no spin-origin energy dissipation). A significant magneto-mechanical hysteresis was observed slightly evolving from cycle to cycle with tendency of stabilization. The extension of basic Stoner-Wohlfarth model of magnetic permeability allowed to fit the data reproducing hysteretic behavior and considering the relaxation of the internal stress. The proposed, low-cost method is suitable in the industrial applications for stress control in large-sized steel elements.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 719-721
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mössbauer study of vacuum annealed Fe100-xGax (10 less - than or equal to x less - than or equal to 35) thin films
Autorzy:
Szumiata, T.
Górka, B.
Brzózka, K.
Gawroński, M.
Gzik-Szumiata, M.
Javed, A.
Morley, N. A.
Gibbs, M. R. J.
Powiązania:
https://bibliotekanauki.pl/articles/147332.pdf
Data publikacji:
2013
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
Fe-Ga
thin films
CEMS
MOKE
Opis:
This work reports results from comparative Mossbauer studies of as-deposited and annealed Fe100.xGax (10 less - than or equal to x less - than or equal to 35) high magnetostrictive thin films of constant thickness (50 plus or minus 2 nm). Films were grown on Si(100) substrates using a co-sputtering and evaporation chamber where Fe has been sputtered and Ga was evaporated. During growth of films, a magnetic field of 65 kA/m has been applied in the plane of the film. Annealed films have been obtained by heating in vacuum for 1 h at 350 centigrade without magnetic field. After annealing, the saturation field of the Fe-Ga films has been significantly reduced. By means of the 57Fe CEMS technique the contributions from several phases have been found: Fe-Ga A2 (bcc), traces of DO3 phase, a gallium-rich disordered phase and iron oxides (both geothite and magnetite). For the sample with x = 26.5 the heat treatment reduces the DO3 phase content whereas for the film with x = 16.4 the opposite tendency has been observed. Mossbauer results were compared with XRD and MOKE findings.
Źródło:
Nukleonika; 2013, 58, 1; 27-30
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Analysis of Magnetic Inclusions in Nanomaterials Based on Multiwall Carbon Nanotubes
Autorzy:
Brzózka, K.
Krajewski, M.
Małolepszy, A.
Stobiński, L.
Szumiata, T.
Górka, B.
Gawroński, M.
Wasik, D.
Powiązania:
https://bibliotekanauki.pl/articles/1032146.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.05.Qr
61.46.Fg
61.48.De
75.50.Tt
75.75.Cd
81.07.De
Opis:
Functionalized multiwall carbon nanotubes as well as nanocomposite based on that material covered by nanoparticles composed of iron oxides were the subject of investigations. In order to identify all iron-bearing phases including those reported on the base of previous X-ray diffraction measurements, the transmission Mössbauer spectroscopy was utilized. The experiments were carried out both at room temperature and also at low temperatures. It was stated that in the investigated nanotubes some impurities were present, originating from the catalyst remains, in form of Fe-C and α -Fe nanoparticles. The Mössbauer spectra collected for the nanocomposite showed a complex shape characteristic of temperature relaxations. The following subspectra related to iron-based phases were identified: sextet attributed to hematite, with hyperfine magnetic field reduced due to the temperature relaxations, sextet corresponding to iron carbide as well as two doublets linked to superparamagnetic hematite and ferrihydrites.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 863-865
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Insulin-like growth factors 1 and 2 (IGF-1 and IGF-2) mRNA levels in relation to the gastrointestinal tract (GIT)development in newborn calves
Autorzy:
Flaga, J.
Gorka, P.
Kowalski, Z.M.
Kaczor, U.
Pietrzak, P.
Zabielski, R.
Powiązania:
https://bibliotekanauki.pl/articles/31097.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The study was aimed at determining the age-depended changes in insulin-like growth factors 1 and 2 (IGF-1 and IGF-2) mRNA levels in relation to the gastrointestinal tract (GIT) development in newborn calves. Twenty four male calves (5-day-old) were randomly allocated to 4 groups which were slaughtered at day 5, 12, 19 and 26 of their life, respectively. Tissue samples from the rumen, abomasum, duodenum, jejunum and liver were taken for analysis, and the level of IGF-1 and IGF-2 mRNA was determined using RT semi-quantitative PCR method. Both IGF-1 and IGF-2 mRNA level was the biggest on 5 day of life, significantly decreased up to day 12-19 in most of analyzed GIT parts, and started to increase thereafter. In the rumen the reduction in the amount of IGFs transcripts was associated with the reduction in papillae length and tunica muscularis thickness. The abomasum weight and tunica mucosa thickness increased from the 5 day up to 19 day of life, whereas abomasal IGF-1 mRNA level decreased together with calf's age up to 19 day of life, and the level of IGF-2 mRNA did not change. The reduction in IGFs mRNA level after 5 day of life in the duodenum (IGF-1 and IGF-2) and in the jejunum (IGF-1) was associated with reduction in villi length (duodenum and jejunum), and the increase of crypt depth (duodenum).
Źródło:
Polish Journal of Veterinary Sciences; 2011, 14, 4
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The comparison of the bioactive compounds content in selected leafy vegetables coming from organic and conventional production
Porównanie zawartości składników bioaktywnych w wybranych warzywach liściowych pochodzących z produkcji ekologicznej i konwencjonalnej
Autorzy:
Kazimierczak, R.
Górka, K.
Hallmann, E.
Średnicka-Tober, D.
Lempkowska-Gocman, M.
Rembiałkowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/337172.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
coriander
leaf mustard
rocket salad
watercress
organic
conventional
agriculture
polyphenols
phenolic acids
carotenoids
chlorophylls
kolendra
musztardowiec
rukola
rukiew wodna
produkcja ekologiczna
produkcja konwencjonalna
polifenole
karotenoidy
chlorofil
Opis:
Four species of leafy vegetables from organic and conventional production (coriander, leaf mustard, rocket salad and watercress) were used in this experiment. The research material consisted of edible parts of vegetables harvested in the beginning of September 2015. After harvest, dry matter content of plant samples was determined. Then plant material was freezedried and stored at -80oC until further laboratory analyses (for chlorophylls, total polyphenols, phenolic acids, flavonoids, carotenoids) were performed. The experiment indicated no differences in dry matter and chlorophylls content between plants from organic and conventional production. At the same time organic vegetables contained, on average, significantly more polyphenols (total) and phenolic acids in comparison to conventional ones. In contrast, plants from conventional production were more abundant in total flavonoids and carotenoids. The effect of agricultural production methods on the content of individual phenolic compounds and carotenoids in vegetables was also observed. Among the examined species, coriander (especially the organic one) was the richest in total polyphenols, in that phenolic acids and flavonoids, as well as carotenoids and chlorophylls. The obtained results provide confirmation that the leafy vegetables, especially those from organic farming, serve as important sources of valuable compounds, i.e. antioxidants with beneficial effects on the human body. Thus, they should be recommended in a preventive healthcare.
W eksperymencie wykorzystano cztery gatunki warzyw liściowych pochodzących z produkcji ekologicznej i konwencjonalnej (kolendra, musztardowiec, rukola i rukiew wodna). Materiał badawczy stanowiły części użytkowe warzyw, które zebrano na początku września 2015. Po zbiorze w warzywach oznaczono zawartość suchej masy. Następnie materiał roślinny poddano liofilizacji i przechowywano w temperaturze minus 80 °C celem ustabilizowania składu chemicznego, a następnie przeprowadzono analizy laboratoryjne. W wyniku przeprowadzonych badań nie wykazano różnic w zawartości suchej masy i chlorofili pomiędzy roślinami z produkcji ekologicznej i konwencjonalnej. Jednocześnie warzywa z produkcji ekologicznej zawierały średnio istotnie więcej polifenoli ogółem i kwasów fenolowych w porównaniu do warzyw konwencjonalnych. Natomiast warzywa z produkcji konwencjonalnej były zasobniejsze we flawonoidy i karotenoidy. System produkcji wpływał również, choć nie tak wyraźnie, na zawartość poszczególnych związków fenolowych i karotenoidów w warzywach. Wśród badanych gatunków najbogatszą pod względem zawartości polifenoli ogółem, w tym kwasów fenolowych i flawonoidów, a także karotenoidów i chlorofili była kolendra, która pochodziła z produkcji ekologicznej. Uzyskane wyniki stanowią wyraźne potwierdzenie, że warzywa liściowe, a zwłaszcza te z upraw ekologicznych, są istotnym źródłem cennych składników, m.in. przeciwutleniaczy wykazujących korzystny wpływ na organizm ludzki. Dlatego też powinny być one zalecane w profilaktyce zdrowotnej.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2016, 61, 3; 218-223
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A preliminary study of the utilization of a low resolution ECG signal from handheld ECG monitor
Autorzy:
Kostorz, I.
Kowalski, W.
Ludwig, Z.
Zając, J.
Piasecki, A.
Socha, M.
Górka, W.
Powiązania:
https://bibliotekanauki.pl/articles/332853.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
ECG signal analysis
low resolution signals
handheld monitor
telemedicine
analiza sygnału EKG
sygnały o niskiej rozdzielczości
monitor przenośny
telemedycyna
Opis:
The paper presents the preliminary study of the utilization of a low resolution ECG signal analysis. The analysis was performed on the signals obtained from a hand-held ECG monitor usually used in primary health care. The aim. The main aim of the study was a registration of series of data by volunteers within couple of months and determination of signal quality and main ECG parameters as follows: Q, R, S waves, QRS duration as well as the end of PQ and the beginning of ST segment. Additionally, the heart rate variability was determined. Materials and methods. The data was registered by 12 volunteers aged from 35 to 55. The ECG tests were carried out for 7 months. The sample rate of the signal was 100 Hz. To determine the ECG parameters the signal processing and statistical methods was used. Results. The sensitivity of the following ECG parameters were: R wave detection - 99,2 %, Q wave detection - 99,1 %, S wave detection - 99,0 %, QRS duration - 99,2 % respectively.
Źródło:
Journal of Medical Informatics & Technologies; 2015, 24; 191-198
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Local Structure and Magnetic Characteristics of FINEMET Alloys Substituted by Vanadium
Autorzy:
Brzózka, K.
Szumiata, T.
Gawroński, M.
Górka, B.
Sovák, P.
Pavlík, G.
Kolesár, V.
Powiązania:
https://bibliotekanauki.pl/articles/1813522.pdf
Data publikacji:
2008-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.-y
76.80.+y
Opis:
Amorphous and nanocrystalline FINEMET-type alloys with vanadium addition up to 7 at% were investigated by the MÖssbauer spectroscopy and magnetic methods. The outcomes evidence alterations in grain structure, although the main effect is related to the changes in intergranular phase. This induces diminution of mean hyperfine field, saturation induction and Curie temperature as well as the increase in coercivity.
Źródło:
Acta Physica Polonica A; 2008, 113, 1; 51-54
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mössbauer and Magnetic Study of Fe+Vitroperm+Plastic System
Autorzy:
Brzózka, K.
Kollár, P.
Szumiata, T.
Sovak, P.
Füzer, J.
Fáberová, M.
Bureš, R.
Górka, B.
Gawroński, M.
Gzik-Szumiata, M.
Powiązania:
https://bibliotekanauki.pl/articles/1201075.pdf
Data publikacji:
2014-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Bb
68.35.bd
76.80.+y
75.60.-d
72.80.Tm
Opis:
Phase composition and magnetization curves of the soft magnetic composites, fabricated by compaction of several kinds of powders mixed in various proportions, have been investigated by means of conversion electron Mössbauer spectroscopy and an alternating gradient force magnetometry. The results point to significant quantity of iron oxides - hematite and magnetite - at the surface of the samples. After the rubbing of thin surface layer, the relative content of oxides was distinctly reduced. Magnetic measurements revealed very similar characteristics of hysteresis curves for all the investigated materials.
Źródło:
Acta Physica Polonica A; 2014, 126, 1; 148-149
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetism and structure evolution in Ni-Zn ferrites thin films - CEMS study
Autorzy:
Szumiata, T.
Gzik-Szumiata, M.
Brzózka, K.
Górka, B.
Gawroński, M.
Javed, A.
Farman, K.
Fatima, T.
Powiązania:
https://bibliotekanauki.pl/articles/1054837.pdf
Data publikacji:
2017-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
76.80.+y
81.15.Fg
81.05.Je
Opis:
In this work, a ⁵⁷Fe conversion electron Mössbauer spectrometry and X-ray diffraction have been utilized in order to investigate the structural and magnetic order in 500 nm thick Ni-Zn ferrite films deposited on Si(100) substrate by laser ablation. Considering the contributions of the conversion electron Mössbauer subspectra corresponding to the tetrahedral (A) and octahedral (B) sites, the spinel inversion parameter in [Zn_{x}Fe_{1-x}]^{A}[Ni_{1-x}Fe_{1+x}]^{B}O₄ films has been estimated. The hyperfine field (B_{hf}) values in the investigated Ni-Zn ferrites thin films are about 5-8% smaller than those of bulk ferrites, which could be a sign of thermal magnetic relaxations due to the size effects. The distribution of hyperfine magnetic field directions was found to be affected by perpendicular anisotropy.
Źródło:
Acta Physica Polonica A; 2017, 131, 4; 836-838
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Milling and Compaction Processes οn Magnetic Properties of FeCo Powder
Autorzy:
Szumiata, T.
Gzik-Szumiata, M.
Brzózka, K.
Gawroński, M.
Górka, B.
Kollár, P.
Olekšáková, D.
Polański, K.
Szmaja, W.
Powiązania:
https://bibliotekanauki.pl/articles/1810615.pdf
Data publikacji:
2009-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
76.80.+y
75.50.Bb
75.60.Ej
81.20.Ev
Opis:
Magnetic and structural studies were performed on $Fe_{50}Co_{50}$ material. The samples (disk-shaped, diameter: 10 mm, thickness: 2.5 mm) were fabricated by compaction of powder under pressure of 800 MPa for 5 min at temperatures 300-600°C. The powder was obtained by milling of $Fe_{50}Co_{50}$ alloy swarfs in high-energy planetary mill. The milling time varied from 1 h to 40 h. In the course of milling process the mean size of alloy pieces was decreasing from about 0.5 mm to 0.05 mm (scanning electron microscopy), which provided more compact structure after compression. The annealing process during compaction strongly reduces a coercive field of the samples. Parameters of conversion electron Mössbauer spectra are almost the same for all samples, which points to not significant changes of atomic and magnetic order after milling and compacting.
Źródło:
Acta Physica Polonica A; 2009, 115, 1; 403-405
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hyperfine fields and magnetoelastic surface effects in Fe72Cu1.5Nb4Si13.5B9 nanocrystalline alloy
Autorzy:
Szumiata, T.
Gawroński, M.
Górka, B.
Brzózka, K.
Blázquez-Gámez, J.
Kulik, T.
Żuberek, R.
Ślawska-Waniewska, A.
Powiązania:
https://bibliotekanauki.pl/articles/148767.pdf
Data publikacji:
2003
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
FINEMET
Mössbauer spectroscopy
nanocrystalline alloys
surface effects
surface magnetostriction
Opis:
In this work hyperfine fields of two-phase nanocrystalline Fe72Cu1.5Nb4Si13.5B9 alloys were studied in order to verify the existence of surface effects. To obtain a series of nanocrystalline samples with small grains of different sizes, a special non- -isothermal annealing procedure of an initially amorphous ribbon was applied. In the case of samples with a significant amount of crystallites, a high field (about 27.5 T) component of continuous part of the hyperfine field distribution was found that could be attributed to boundary regions between the grains and rest of the sample. The existence of the surface effects was confirmed in the magnetostrictive experiment.
Źródło:
Nukleonika; 2003, 48,suppl.1; 85-88
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-70 z 70

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies