Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Dzik, T." wg kryterium: Autor


Tytuł:
A dicynodont-theropod association in the latest Triassic of Poland
Autorzy:
Dzik, J.
Sulej, T.
Niedźwiedzki, G.
Powiązania:
https://bibliotekanauki.pl/articles/20095.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
dicynodont-theropod association
Triassic
Polska
dicynodont
theropod dinosaur
bone
paleontology
skeleton
fossil
Late Triassic
Opis:
It is generally accepted that during the Triassic the composition of tetrapod faunas underwent a series of fundamental transformations, mainly as a result of diversification of archosaurs and decline of therapsids (Benton 1994, 2004, 2006). The last herbivorous basal synapsids, dicynodonts, disappeared from the record in the early Norian of the Americas, about 220 Ma (Langer et al. 2007), being unknown from the Late Triassic of Europe. Here, we report a partially articulated skeleton and isolated bones of a giant rhino−size dicynodont in the Upper Triassic fluvial sediments at Lisowice (Lipie Śląskie clay−pit) in southern Poland. Paleobotanical data indicate an early Rhaetian age for the fauna (Dzik et al. 2008; Niedźwiedzki and Sulej 2008). The dicynodont bones are associated with bones of carnivorous dinosaurs, pterosaurs, as well as capitosaur and plagiosaur amphibians. Dicynodonts were represented in the Germanic Basin throughout the Late Triassic, as proven by findings of smaller dicynodonts in older deposits in the same area, associated there with temnospondyl amphibians. It appears, thus, that the fossil record of tetrapod succession in the Late Triassic was strongly controlled by ecological factors and biased by uneven representation of particular environments. The Lisowice assemblage proves that faunas dominated by dicynodonts did not entirely disappear at least until the end of the Triassic.
Źródło:
Acta Palaeontologica Polonica; 2008, 53, 4
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the state of stress in structural components of a screen separator
Ocena stanu naprężenia w elementach konstrukcyjnych przesiewacza
Autorzy:
Wolny, S.
Banaszewski, T.
Dzik, S.
Matachowski, F.
Powiązania:
https://bibliotekanauki.pl/articles/369083.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
konstrukcje metalowe
stan naprężenia
MES (metoda elementów skończonych)
pomiary tensometryczne
metal structures
stress state
FEM
strain measurements
Opis:
This study summarises the results of FEM analysis of the state of stress generated in structural components of a PZ3R screen separator under the typical operating conditions. Simplifications underlying the numerical analysis were verified by measuring the stresses in selected parts of the machine. Resistance test data indicated the directions for further modifications of structural elements of the screen separator, at the same time confirming the adequacy of these tests and emphasising the importance of the sequence of the applied tests.
W opracowaniu przedstawiono wyniki analizy numerycznej stanu naprężenia (MES), jaki powstaje w elementach konstrukcyjnych przesiewacza PZ3R w warunkach normalnej eksploatacji. Uproszczenia, jakie wprowadzono na etapie analizy numerycznej, zweryfikowano wykonując pomiar naprężeń w wytypowanych obszarach konstrukcji. Wyniki analiz wytrzymałościowych wskazały kierunki możliwych modyfikacji elementów konstrukcyjnych przesiewacza, a ponadto potwierdziły celowość ich przeprowadzenia, ale przy zachowaniu ściśle określonej kolejności.
Źródło:
Mechanics and Control; 2010, 29, 2; 88-96
2083-6759
2300-7079
Pojawia się w:
Mechanics and Control
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A large predatory archosaur from the Late Triassic of Poland
Autorzy:
Niedzwiedzki, G.
Sulej, T.
Dzik, J.
Powiązania:
https://bibliotekanauki.pl/articles/20153.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
predatory archosaur
archosaur
Late Triassic
Polska
paleontology
Archosauria
Dinosauria
Smok wawelski archosaur
new species
Opis:
We describe a new large predatory archosaur, Smok wawelski gen. et sp. nov., from the latest Triassic (latest Norian–early Rhaetian; approximately 205–200 Ma) of Lisowice (Lipie Śląskie clay−pit) in southern Poland. The length of the reconstructed skeleton is 5–6 m and that of the skull 50–60 cm, making S. wawelski larger than any other known predatory archosaur from the Late Triassic and Early Jurassic of central Europe (including theropod dinosaurs and “rauisuchian” crurotarsans). The holotype braincase is associated with skull, pelvic and isolated limb−bones found in close proximity (within 30 m), and we regard them as belonging to the same individual. Large, apparently tridactyl tracks that occur in the same rock unit may have been left by animals of the same species. The highly autapomorphic braincase shows large attachment areas for hypertrophied protractor pterygoideus muscles on the lateral surface and a wide, funnel−like region between the basal tubera and basipterygoid processes on the ventral surface. The skeleton (cranial and postcranial) possesses some features similar to those in theropod dinosaurs and others to those in large crocodile−line archosaurs (“rauisuchians”), rendering phylogenetic placement of S. wawelski difficult at this time.
Źródło:
Acta Palaeontologica Polonica; 2012, 57, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aglomeracja ciśnieniowa węgli energetycznych i węgla brunatnego
Pressure agglomeration of hard and brown coals
Autorzy:
Dzik, T.
Marciniak-Kowalska, J.
Madejska, L.
Powiązania:
https://bibliotekanauki.pl/articles/1218764.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
węgiel
granulacja
peleta
energia
wytrzymałość na ściskanie
coal
granulation
pellet
energy
compressive strength
Opis:
W artykule przedstawiono wyniki badań granulowania węgli kamiennych niskiej jakości i węgli brunatnych o uziarnieniu poniżej 2 mm. Zbadano wpływ składu ziarnowego węgli na zawartość popiołu, siarki, azotu, ciepło spalania. Wykonano próby aglomeracji w matrycy zamkniętej i na jej podstawie obliczono nakłady pracy właściwej w procesie granulacji. Wykonano próby peletowania w granulatorze z płaską matrycą z udziałem lepiszcza w postaci lignosulfonianu sodu i zbadano ich wytrzymałość na ściskanie
The results of granulation of low quality hard coals and brown coal, with grain size under 2 mm were presented in the article. The influence of coal size analysis on the content of ash, sulfur and nitrogen were tested, as well as heat of combustion. The agglomeration tests were performed in closed die and the results were the basis for calculation of specific work in granulation process. The pelletizing experiments were made in granulator with flat die, with tha addition of sodium lignosulfonate as binder. The compressive strength of pellets was defined.
Źródło:
Chemik; 2012, 66, 5; 445-452
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Granulacja ciśnieniowa dekarbonatów dolomitowych do produkcji materiałów ogniotrwałych
The pressure granulation of dolomite decarbonates for the production of refractory materials
Autorzy:
Niesyt, M.
Dzik, T.
Wyszomirski, P.
Powiązania:
https://bibliotekanauki.pl/articles/1219045.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
dolomit
granulacja
dekarbonat dolomitowy
klinkier dolomitowy
hydration
materiały ogniotrwałe
dolostone
granulation
dolomite decarbonate
doloma clinker
refractories
Opis:
Próbki dekarbonatów surowców dolomitowych ze złóż Brudzowice, Ząbkowice, Żelatowa i Ołdrzychowice zostały zaformowane pod ciśnieniami 20, 50 i 200 MPa. Stwierdzono, że podwyższenie wartości ciśnieniami formowania przyczynia się do wzrostu odporności na hydratację pastylek po ich uprzednim spieczeniu w 1550, 1600 i 1650°C. Najbardziej korzystne właściwości, m.in. najmniejszą podatność na hydratację wykazały próbki otrzymane z dolomitu triasowego z Brudzowic. W przeciwieństwie do tego, w przypadku wybitnie czystego dolomitu z Ołdrzychowic hydratacja przebiegała w sposób gwałtowny pomimo zastosowania najwyższego ciśnienia formowania (200 MPa) i najwyższej temperatury spiekania(1650°C). W przypadku tego surowca niezbędne będzie przeprowadzenie spiekania dekarbonatu w jeszcze wyższych temperaturach.
Decarbonated dolostones of Brudzowice, Ząbkowice, Żelatowa and Ołdrzychowice deposits were moulded under the following pressures: 20, 50 and 200 MPa. Authors found a significant impact of the moulding pressure in the hydration of pellets burnt at three various temperatures:1550, 1600 and1650oC. The highest resistance to hydration showed the samples obtained from Triassic dolostone of Brudzowice. On the contrary hydration of pellets obtained from dolostone of Ołdrzychowice runs quickly despite the formation pressure of 200 MPa and sintering temperature of 1650oC. The decarbonated samples obtained from this raw material require higher sintering temperature.
Źródło:
Chemik; 2012, 66, 5; 418-427
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda doboru elementów układu roboczego granulatora z płaską matrycą
The method for selection of the working system components for a pellet press with flat die
Autorzy:
Chłopek, M.
Dzik, T.
Hryniewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/1218682.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
granulator z płaską matrycą
granulacja ciśnieniowa
pellet press
Opis:
W artykule przedstawiono charakterystykę granulatora z płaską matrycą i zwrócono uwagę na szerokie możliwości jego stosowania. Następnie pokazano własne koncepcje określania na drodze teoretycznej kąta chwytu materiału w układzie roboczym granulatora oraz promienia rolki zagęszczającej. Omówiono także dotychczasowe doświadczenia w zakresie doboru materiałowych i geometrycznych cech konstrukcyjnych elementów roboczych maszyny. Zawarte w artykule rozważania wykorzystano w praktyce projektowej.
The article describes the flat die pelleting presses, and drew attention to the wide possibilities of application. Then presented their ideas on the way the theoretical determination of the angle of grip material in the granulator operating system and the radius of the roller compaction. Also discussed the experience in the selection of materials and geometric design features of the working elements of the machine. Included in the discussion paper were used in design practice.
Źródło:
Chemik; 2012, 66, 5; 493-500
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka doboru składników kompozytowych paliw stałych dla celów zgazowania
Methods of selecting components of composite solid fuels for the purpose of gasification
Autorzy:
Dzik, T.
Rozwadowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/283595.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
węgiel
biomasa
paletyzacja
zgazowanie
coal
biomass
pelletising
gasification
Opis:
Wytwarzanie paliw kompozytowych z węgla i biomasy stanowi innowacyjne podejście do procesów konwersji paliw stałych. Operacja scalania węgla i biomasy stwarza bowiem nie tylko możliwość zwiększenia tzw. gęstości energetycznej biomasy, ale równie? okazję do wprowadzenia do składu paliwa dodatków, które dzięki swoim specyficznym właściwościom fizykochemicznym pozwalają podnieść wartość użytkową uzyskanego kompozytu. Celem projektu "CoalGas" - Work Package 5, w którym uczestniczy Akademia Górniczo-Hutnicza w Krakowie, jest opracowanie technologii przygotowania węgla i biomasy dla celów zgazowania. Jednym z głównych zadań, od którego rozpoczęto realizacj? projektu "CoalGas" w zakresie Work Package 5 by?o opracowanie koncepcji procesowych przygotowania węgla i biomasy do wytworzenia paliwa kompozytowego dedykowanego instalacjom prowadzącym procesy spalania oraz zgazowania. Opracowana metodyka doboru składników paliwa kompozytowego dla celów zgazowania pozwala na: wytypowanie typu reaktora, dla którego może być dedykowane paliwo kompozytowe wytworzone z węgla i biomasy, określenie parametrów technologicznych jakimi powinno charakteryzować się paliwo kompozytowe oraz dobór składników i opracowanie receptury paliw kompozytowych przeznaczonych do zgazowania w wytypowanych urządzeniach. Zaproponowana metodyka zawiera trzy fazy postępowania, składające się z kilku etapów, co umożliwia modyfikację składu chemicznego paliwa kompozytowego przeznaczonego do procesu zgazowania oraz pozwala na kształtowanie jego właściwości mechanicznych. Metoda łączy w sobie elementy: modelowania (w zakresie procesu zgazowania), elementy badawcze (w zakresie analizy technicznej i elementarnej składników), elementy doświadczalne (w zakresie procesu aglomeracji ciśnieniowej), elementy konstrukcyjne (w zakresie doboru cech ukłaadu zagęszczania) oraz elementy utylitarne poprzez zastosowanie technologii wytwarzania i zgazowywania tych paliw.
The production of composite fuels of coal and biomass is an innovative approach to the processes of converting solid fuels. Not only does the operation of coal and biomass consolidation create an opportunity for increasing the energy density of biomass, but also a chance to incorporate additives to fuels which – thanks to their specific physical and chemical properties – allow for increasing the usable value of the obtained composite. The “CoalGas” – Work Package 5 programme in which the AGH University of Science and Technology participates is aimed at developing the technology for producing coal and biomass for the purpose of gasification. One of the main tasks with which the “CoalGas” project was initiated in the range of Work Package 5 was to develop the process concepts for preparing coal and biomass for the generation of composite fuels dedicated to installations used in the burning and gasification processes. The elaborated methods of selecting composite fuel components for the purpose of gasification allows for selecting the type of reactor for which the composite fuel produced from coal and biomass is dedicated, specifying technological parameters of composite fuels, as well as selecting ingredients and working out the recipe for composite fuels intended for gasification in the selected devices. The proposed methods include three phases of the process consisting of several stages which enables the modification of the chemical contents of a composite fuel intended for the gasification process, and enables the development of its mechanical properties. The method combines the following elements: modelling (in the range of the gasification process), research elements (in the range of the technical and elemental analysis of components), experimental elements (in the range of the pressure agglomeration process), construction elements (in the range of the selection of the compaction system) and utilitarian elements by using the technology of producing and gasifying these fuels.
Źródło:
Polityka Energetyczna; 2012, 15, 3; 169-180
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania ciśnieniowej aglomeracji paliw kompozytowych
Research on pressure agglomeration of composite fuels
Autorzy:
Dzik, T.
Hryniewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/2072430.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
biomasa
węgle niskiej jakości
granulacja
paliwa kompozytowe
biomass
low-quality coal
granulation
composite fuel
Opis:
Nowatorskie podejście do zagospodarowania węgli niskiej jakości oraz odpadów z produkcji rolnej i przemysłu papierowego, a także upraw roślin energetycznych. Przedstawiono sposób wytworzenia stałych paliw kompozytowych w oparciu o wytypowane składniki, który zweryfikowano w skali laboratoryjnej. Dokonano porównania właściwości mechanicznych oraz użytkowych tych paliw. Przedstawiono także wyniki testów spalania wybranego paliwa kompozytowego w kotle małej mocy oraz współspalania z węglem brunatnym w kotle fluidalnym.
A new approach to the management of low-quality coals and wastes fron agricultural production, paper industry and energetic plant cultivation is pre sented in the paper. A method of the production of solid composite fuels ba sed on chosen components and verified in the laboratory scale is proposed Mechanical and useful properties of these fuels are compared. The results 0: selected composite fuel combustion tests performed in a low-power boilei and co-burning tests with brown coal in a fluidized bed are shown.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 3; 165--167
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania nacisku bocznego w procesie ciśnieniowej aglomeracji materiałów ziarnistych
Research on side thrust during pressure agglomeration of granular materials
Autorzy:
Dzik, T.
Hryniewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/2072424.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
granulacja ciśnieniowa
nacisk boczny
stanowisko badawcze
pressure granulation
side thrust
side thrust factor
experimental set-up
Opis:
W pracy przedstawiono stanowisko badawcze nowej konstrukcji pozwalające na wyznaczenie charakterystyk zagęszczania i pomiaru nacisku bocznego w dwóch kierunkach płaszczyzny prostopadłej do nacisku normalnego. Wykonano pomiary nacisku bocznego dla wybranych materiałów ziarnistych o różnych właściwościach takich jak: koncentrat miedzi, bentonity, iły, węgiel koksujący, popiół, pucolana trociny drzewne słoma zbóż. Wyniki przedstawiono w postaci graficznej jako zależność współczynnika nacisku bocznego i nacisku normalnego. Podano interpretacje wyników oraz przykłady ich zastosowań.
A new construction of experimental setup that enables the determination of characteristic curves of compacting and side thrust measurements in two directions of the plane orthogonal to axial thrust are presented in the paper. The measurements of side thrust for chosen granular materials of different properties such as copper concentrate, bentonites, clays, coking coal, fly ashes, pozzolana, pine sawdust and com straw were carried out. The results are shown as a plot of the dependence between the side thrust factor and axial thrust. Interpretation of results and examples of their application are given.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 3; 168--170
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie suszenia słomy i węgla brunatnego w suszarce multicyklonowej
Study of the drying process of straw and lignite in a multi-cyclone dryer
Autorzy:
Dzik, T.
Czerski, G.
Powiązania:
https://bibliotekanauki.pl/articles/215971.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
paliwo kompozytowe
suszenie węgla
suszenie biomasy
suszarka multicyklonowa
composite fuel
coal drying
drying process
Opis:
Proces suszenia jest niezbędnym elementem podczas wytwarzania paliw kompozytowych z biomasy i węgla. Omawiana suszarka multicyklonowa jest oryginalnym rozwiązaniem konstrukcyjnym opracowanym i opatentowanym przez AGH, które może być wykorzystane w trakcie przygotowania surowca do procesu scalania. W artykule przedstawiono wyniki pomiarów suszenia rozdrobnionej słomy i węgla brunatnego w doświadczalnej suszarce multicyklonowej oraz rezultaty obliczeń symulacyjnych jej pracy. Do utworzenia modelu numerycznego CFD (Computational Fluids Dynamics) procesu suszenia w suszarce multicyklonowej wykorzystano oprogramowanie ANSYS Fluent. Dzięki modelowaniu numerycznemu CFD uzyskano informacje na temat pracy i funkcjonowania wymienionej suszarki. Zaprezentowano szereg uzyskanych w trakcie obliczeń rezultatów, tj.: temperatury i zawartości wilgoci dla surowca i gazu suszącego, zmianę zawartości wilgoci surowca na poszczególnych stopniach suszarki, wpływ uziarnienia paliwa na stopień jego odparowania, rozkłady najważniejszych parametrów pracy suszarki dla gazu do suszenia i suszonych ziaren oraz czas przebywania surowca w poszczególnych stopniach suszarki. Ponadto wyznaczono współczynnik wymiany ciepła w suszarce multicyklonowej, który wynosi do 250 W/(m2K). Przeprowadzone próby na stanowisku doświadczalnym suszenia biomasy i węgla brunatnego oraz obliczenia symulacyjne potwierdziły słuszność przyjętej koncepcji suszenia z wykorzystaniem cyklonów w układzie szeregowym. Suszarka wykazała zdolność do obniżenia o 15% wilgoci w słomie przy zastosowaniu niskiej temperatury suszenia, tj. 170°C dla zastępczego rozmiaru ziarna 1,5 mm. W przypadku suszenia rozdrobnionego węgla brunatnego dla rozmiaru zastępczego ziarna 0,5 mm, ilość wilgoci zmniejszyła się o 21%. Badana suszarka multicyklonowa wykazała dużą dynamikę procesu suszenia, która wynosi 3%/s w przypadku suszenia rozdrobnionej słomy i 4%/s dla rozdrobnionego węgla brunatnego.
The drying process is an essential part of the production of composite fuels from biomass and coal. The presented multi-cyclone dryer is an original design solution developed and patented by AGH, which can be used during the preparation of raw material for the unification process. This article presents the results of measurements of the particulate straw and lignite drying in a multi-cyclone dryer, and the results of simulation calculations of the dryer’s performance. The ANSYS Fluent software was used to create a CFD (Computational Fluids Dynamics) numerical model of the drying process in a multi-cyclone dryer. The CFD numerical modelling provided information about the performance and operation of the dryer. Key results obtained during the calculations include the following: the temperature and moisture content of the raw material and drying gas, the change in the moisture content of the raw material for each stage of the dryer, the influence of fuel particle size on the degree of evaporation, the distribution of the most important parameters of the dryer’s performance for drying gas and dried particles, and the residence time of the raw material for each stage of the dryer. Moreover, the heat transfer coefficient in the multi-cyclone dryer was determined, which is up to 250 W/(m2K). The conducted experimental tests of biomass and lignite drying in the dryer, as well as the simulation calculations, confirmed the validity of the approach for drying with the use of cyclones arranged in series. The dryer demonstrated the ability to release 15% of the moisture from the straw with the use of a low drying temperature, i.e. 170°C for the sample particle size of 1.5 mm. In the case of particulate lignite drying for the substitute particle size of 0.5 mm, the amount of evaporated moisture was 21%. The examined multi-cyclone dryer demonstrated high dynamics in the drying process, at 3% per s in the case of particulate straw drying and 4% per s for particulate lignite.
Źródło:
Gospodarka Surowcami Mineralnymi; 2014, 30, 3; 145-159
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining the grip angle in a granulator with a flat matrix
Wyznaczanie kąta chwytu w granulatorze z płaską matrycą
Autorzy:
Chłopek, M.
Dzik, T.
Hryniewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/946139.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
granulacja ciśnieniowa
paliwa kompozytowe
kąt chwytu
współczynnik tarcia zewnętrznego i wewnętrznego
pressure granulation
composite fuels
grip angle
external and internal friction coefficient
Opis:
W artykule zwrócono uwagę na nową koncepcję określania kąta chwytu w układzie roboczym rolka - płaska matryca. Poddano ją weryfikacji eksperymentalnej na przykładzie paliw kompozytowych. W tym celu opracowano metodykę i wyznaczono współczynniki tarcia zewnętrznego oraz wewnętrznego kilku mieszanek paliw. Ich znajomość umożliwia określenie kąta chwytu mającego istotny wpływ na wydajność granulatora. Następnie przeprowadzono próby granulacji ciśnieniowej wybranych mieszanek. Wyniki badań oraz obliczeń przedstawiono w artykule. Porównanie doświadczalnego kąta chwytu oraz wyznaczonego z równania teoretycznego świadczy o zbieżności teorii z rzeczywistą sytuacją fizyczną. Wyznaczone współczynniki tarcia determinują również dobór odpowiedniej średnicy i szerokości rolki, a także kształtu jej powierzchni roboczej. Ma to istotne znaczenie dla prawidłowej eksploatacji prasy z płaską matrycą.
The article addresses the new concept of determining the grip angle in a roll – a flat matrix working arrangement. It was verified experimentally with the exemplary use of composite fuels. For this purpose, a methodology has been developed and the external and internal friction coefficients for several fuel blends have been determined. Knowing them enables one to determine the grip angle which has a significant influence on the efficiency of the granulator. Then, pressure granulation tests with selected blends were carried out. The test results and the calculations are presented in the article. The comparison of the experimental grip angle and the one determined on the basis of a theoretical equation testifies to the correspondence between the theory and the actual physical situation. The determined friction coefficients also determine the selection of an adequate diameter and width of the roller as well as the shape of its working surface. It is of essential importance for ensuring the correct operation of a press with a flat matrix.
Źródło:
Eksploatacja i Niezawodność; 2014, 16, 2; 337-340
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hazards to humans and animals associated with antibiotic misuse
Autorzy:
Micinski, J.
Pogorzelska, J.
Slyamowa, A.
Kobzhassarov, T.
Bermagambetova, N.
Dzik, S.
Kowalski, P.M.
Zaborowska-Sapeta, K.
Kowalski, I.M.
Powiązania:
https://bibliotekanauki.pl/articles/14794.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
antibiotic
antibiotic resistance
dysbacteriosis
plant extract
microflora
animal husbandry
viral infection
Staphylococcus
health hazard
hazard
man
animal
antibiotic misuse
Opis:
The increasing resistance of community and hospital acquired bacterial strains has become a challenge to the current health policy in Poland. Although some bacteria are known to have a peculiar resistance towards a given agent, antibiotics have a well-established position in clinical practice and are broadly available in our lives. The universal access to antimicrobial therapy and its overuse have created an issue of previously susceptible bacteria now presenting antibiotic resistance. All bacteria that survive antibiotic treatment, continue growth and reproduction. This phenomenon is also observed in livestock rearing. An inadequate implementation of antibiotic therapy leads to the transfer of resistant bacterial strains into the environment of people, who eat products of animal and plant origin. Moreover, the non-compliance to law in terms of antibiotics added to animal fodder or negilgence of withdrawal periods seems to further exacerbate the situation. Various research projects conducted in Poland and elsewhere have demonstrated that antibiotics produce an immunosuppressive effect, which exposes both humans and animals to different infections. Antibiotics also interfere with the growth of many microorganisms, recognized as part of the human and animal physiological microflora, as a result of which dysbacteriosis may develop. In order to limit the use of antibiotics in animal husbandry, research should be focus on finding alternative agents based on plant extracts that undergo biodegradation.
Źródło:
Journal of Elementology; 2015, 20, 4
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
X-Ray Diffraction, Mössbauer Spectroscopy, and Magnetoelectric Effect Studies of Multiferroic Bi₅Ti₃FeO₁₅ Ceramics
Autorzy:
Pikula, T.
Guzdek, P.
Dzik, J.
Lisinska-Czekaj, A.
Jartych, E.
Powiązania:
https://bibliotekanauki.pl/articles/1385375.pdf
Data publikacji:
2015-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.85.+t
85.80.Jm
61.05.cp
76.80.+y
Opis:
Bi₅Ti₃FeO₁₅ ceramics belongs to multiferroic class of materials. In this work it was prepared by solid-state sintering method and investigated by X-ray diffraction, Mössbauer spectroscopy, and magnetoelectric effect measurements. As it was proved by X-ray diffraction studies the single-phase Bi₅Ti₃FeO₁₅ compound was obtained. The Mössbauer investigations revealed paramagnetic character of the compound at room temperature as well as at 80 K. Magnetoelectric measurements were carried out at room temperature using lock-in dynamic method and they proved presence of magnetoelectric coupling in this material. Additional magnetoelectric studies were carried out after subsequent electric poling of the sample. It was found that the maximum value of the coupling coefficient was almost twice bigger than in the case without the initial poling and reached a value of $α_{ME}$ ≈ 20.7 mV cm⁻¹ Oe⁻¹.
Źródło:
Acta Physica Polonica A; 2015, 127, 2; 296-299
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania właściwości heterogenicznych stałych paliw rakietowych na bazie kauczuku HTPB
Testing the properties of heterogeneoussolid rocket propellants based on HTPB rubber
Autorzy:
Bogusz, R.
Florczak, B.
Sałaciński, T.
Dzik, A.
Powiązania:
https://bibliotekanauki.pl/articles/235479.pdf
Data publikacji:
2016
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
paliwo rakietowe
paliwo stałe
kauczuk HTPB
szybkość spalania
silnik rakietowy
rocket propellant
solid propellant
HTPB rubber
rocket motor
burning rate
Opis:
W pracy przedstawiono wyniki badań wybranych właściwości fizykochemicznych i balistycznych heterogenicznych stałych paliw rakietowych (HSPR) na bazie kauczuku HTPB, chloranu(VII) amonu oraz pyłu aluminiowego różniących się zawartością i rodzajem modyfikatora szybkości spalania (2,2`-bis (etyloferrocenylo) propan (katocen), Fe2O3, Cu2Cr2O5). Badania właściwości balistycznych przeprowadzono w układzie laboratoryjnego silnika rakietowego (LSR), w którym spalano prostopadłościenne kształtki HSPR pozwalające metodą pośrednią na określenie szybkości spalania w funkcji ciśnienia produktów spalania w komorze LSR.
This paper presents some results of tests of selected physicochemical and ballistic properties of heterogeneous solid rocket propellants (HSRP) based on HTPB rubber, chlorate(VII) ammonium and aluminium dust with different contents and type of burning rate modifier (2,2`-bis(ethylferrocenyl) propane (catocene), Fe2O3, Cu2Cr2O5). A laboratory rocket motor (LRM) was used for testing ballistic properties of the rectangular slabs of HSR Pin order to assess by an indirect method the burning rate of the HSPR slabs depending on the pressure of combustion products in the LRM chamber.
Źródło:
Problemy Techniki Uzbrojenia; 2016, 45, 137; 111-126
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Technology and Structural Properties of Special Glass Modified (Ba0.6Pb0.4)TiO3 Ceramics
Autorzy:
Wodecka-Dus, B.
Adamczyk, M.
Goryczka, T.
Dzik, J.
Radoszewska, D.
Kozielski, L.
Bochenek, D.
Powiązania:
https://bibliotekanauki.pl/articles/351884.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
(BaxPb1−x)TiO3 ceramics
special glasses
SEM microstructures
XRD measurements
Opis:
The present paper widely describes the details of technology of (Ba0.6Pb0.4)TiO3 ceramics modified with PbO-B2O3-Al2O3-WO3 special glass, as well as the influence of admixture on the microstructure and crystal structure of basic material. The microstructure investigations reveal the significant increase of grain size and a decrease of pores participation in volume of modified samples, whereas the X-Ray Diffraction (XRD) measurements show a decrease of the volume of unit cell. The obtained results are discussed due to processes occurring during the sintering process at high temperature.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 4; 1761-1766
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies