Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Cho, M." wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
Influence of InAs Coverage on Transition of Size Distribution and Optical Properties of InAs Quantum Dots
Autorzy:
Kim, G.
Jeon, S.
Cho, M.
Choi, H.
Kim, D.
Kim, M.
Kwon, Y.
Choe, J.
Kim, J.
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1535820.pdf
Data publikacji:
2010-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.15.Hi
68.37.Ps
78.55.Cr
78.67.Hc
Opis:
The influence of InAs coverage on the formation of self-assembled quantum dots grown by molecular-beam epitaxy was investigated by atomic force microscopy and photoluminescence measurements. As the InAs coverage increased from 2.0 to 3.0 monolayers, the quantum dot density decreased from 1.1 × $10^{11}$ to 1.36 × $10^{10} cm^{-2}$. This result could be attributed to the coalescence of neighboring small InAs quantum dots resulting in the formation of much larger InAs quantum dots with lower quantum dot density. Atomic force microscopy results revealed that as the InAs quantum dot coverage increased, the transition of size distribution of InAs quantum dots from single-modal to multimodal occurred. The temperature-dependent photoluminescence spectra showed that the photoluminescence spectra red shifted and the photoluminescence peak intensity decreased as the InAs coverage increased. The thermal activation energy was strongly dependent on the InAs coverage, and for InAs quantum dots with 3.0 ML thick InAs coverage, this energy was estimated to be 147 meV.
Źródło:
Acta Physica Polonica A; 2010, 118, 4; 673-676
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical Properties of Multi-Stacked InAs Quantum Dots Embedded in GaAs/InGaAs Strained Layer and its Annealing Behaviors
Autorzy:
Kim, D.
Kim, G.
Jeon, S.
Cho, M.
Choi, H.
Kim, M.
Lee, D.
Kim, J.
Eom, G.
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1537752.pdf
Data publikacji:
2010-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.67.Hc
78.55.Cr
81.05.Ea
Opis:
Multi-stacked InAs QDs embedded in ten periods of GaAs/$In_{0.1}Ga_{0.9}As$ strained layers were grown by MBE and their optical properties were investigated by using PL spectroscopy. For the QDs embedded in ten periods of GaAs/$In_{0.1}Ga_{0.9}As$ strained layers, the PL intensity is enhanced about 4.7 times and a narrower FWHM of 26 meV is observed compared to those of the conventional multi-stacked QDs. The PL spectra of the InAs QDs show blue-shifts of about 50 meV with increasing annealing temperature up to 850°C. At annealing temperature of 600°C, the FWHM of the PL peak is reduced to 16 meV and PL intensity is enhanced compared to those of the as-grown sample, which indicates improvement of size uniformity and crystal quality of the QDs.
Źródło:
Acta Physica Polonica A; 2010, 117, 6; 941-944
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of CoCrFeNiMn High Entropy Alloy Powder Processed by Gas Atomization
Autorzy:
Park, T. G.
Lee, S. H.
Lee, B.
Cho, H. M.
Choi, W. J.
Kim, B. S.
Shin, K. S.
Kim, T.-S.
Powiązania:
https://bibliotekanauki.pl/articles/353649.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high entropy alloy
gas atomization
spark plasma sintering
CoCrFeNiMn
Opis:
In this study, precisely controlled large scale gas atomization process was applied to produce spherical and uniform shaped high entropy alloy powder. The gas atomization process was carried out to fabricate CoCrFeNiMn alloy, which was studied for high ductility and mechanical properties at low temperatures. It was confirmed that the mass scale, single phase, equiatomic, and high purity spherical high entropy alloy powder was produced by gas atomization process. The powder was sintered by spark plasma sintering process with various sintering conditions, and mechanical properties were characterized. Through this research, we have developed a mass production process of high quality and spherical high entropy alloy powder, and it is expected to expand applications of this high entropy alloy into fields such as powder injection molding and 3D printing for complex shaped components.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1055-1059
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multistep Heat-Treatment Effects on Electrospun Nd-Fe-B-O Nanofibers
Autorzy:
Jeon, E. J.
Eom, N. S. A.
Lee, J.
Lee, B.
Cho, H. M.
On, J. S.
Choa, Y.-H
Kim, B. S.
Powiązania:
https://bibliotekanauki.pl/articles/354311.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nd-Fe-B
nanofibers
electrospinning
heat treatment
Opis:
Neodymium-Iron-Boron (Nd-Fe-B) magnets are considered to have the highest energy density, and their applications include electric motors, generators, hard disc drives, and MRI. It is well known that a fiber structure with a high aspect ratio and the large specific surface area has the potential to overcome the limitations, such as inhomogeneous structures and the difficulty in alignment of easy axis, associated with such magnets obtained by conventional methods. I n this work, a suitable heat-treatment procedure based on single-step and multistep treatments to synthesize sound electrospun Nd-Fe-B-O nanofibers of Φ572 nm was investigated. The single-step heat-treated (directly heat-treated at 800°C for 2 h in air) samples disintegrated along with the residual organic compounds, whereas the multistep heat-treated (sequential three-step heat-treated including three steps;: dehydration (250°C for 30 min in an inert atmosphere), debinding (650°C for 30 min in air), and calcination (800°C for 1 h in air)) fibers maintained sound fibrous morphology without any organic impurities. They could maintain such fibrous morphologies during the dehydration and debinding steps because of the relatively low internal pressures of water vapor and polymer, respectively. In addition, the NdFeO3 alloying phase was dominant in the multistep heat-treated fibers due to the removal of barriers to mass transfer in the interparticles.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1433-1437
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A New 3D Sensor System by Using Virtual Camera Model and Stereo Vision for Mobile Robots
Autorzy:
Lee, H.
Kim, M. N.
Cho, H.
Powiązania:
https://bibliotekanauki.pl/articles/384962.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
virtual camera model
stereo vision
Opis:
So many researches have been conducted to develop 3D sensing method for mobile robots. Among them, the optical triangulation, a well-known method for 3D shape measurement, is also based on active vision sensing principle for mobile robot sensor system, so that the measurement result is robust to illumination noises from environments. Due to this advantage it has been popularly used. However, to obtain the 3D information of environment needs a special scanning process and scanning actuators need. To omit this scanning process multi-line projection methods have been widely researched. However, they suffer from an inherent limitation: The results of multi-line projection method commonly have measurement errors because of 2 -ambiguity caused by regularly repeated multiline laser pattern. In this paper, to overcome 2 -ambiguity effectively, we introduce a novel sensing method for a 3D sensing system using multi-line projection and stereo cameras, based on the virtual camera model and stereovision algorithm. To verify the efficiency and accuracy of the proposed method, a series of experimental tests is performed.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2008, 2, 4; 38-44
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simplified procedure for the free vibration analysis of rectangular plate structures with holes and stiffeners
Autorzy:
Cho, D. S.
Vladimir, N.
Choi, T. M.
Powiązania:
https://bibliotekanauki.pl/articles/260556.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
energy approach
plate with hole
stiffened panel
thick plate
VAPS software
free vibration analysis
Opis:
Thin and thick plates, plates with holes, stiffened panels and stiffened panels with holes are primary structural members in almost all fields of engineering: civil, mechanical, aerospace, naval, ocean etc. In this paper, a simple and efficient procedure for the free vibration analysis of such elements is presented. It is based on the assumed mode method and can handle different plate thickness, various shapes and sizes of holes, different framing sizes and types as well as different combinations of boundary conditions. Natural frequencies and modes are determined by solving an eigenvalue problem of a multi-degree-of-freedom system matrix equation derived by using Lagrange’s equations. Mindlin theory is applied for a plate and Timoshenko beam theory for stiffeners. The applicability of the method in the design procedure is illustrated with several numerical examples obtained by the in-house developed code VAPS. Very good agreement with standard commercial finite element software is achieved.
Źródło:
Polish Maritime Research; 2015, 2; 71-78
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electron impact excitation and dissociation of halogen-containing molecules
Autorzy:
Kitajima, M.
Suzuki, R.
Tanaka, H.
Pichl, L.
Cho, H.
Powiązania:
https://bibliotekanauki.pl/articles/148521.pdf
Data publikacji:
2003
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
crossed beam experiment
dissociation
dissociative attachment
differential cross section
electron impact
Opis:
A systematic analysis of the absolute differential cross sections (DCSs) for electron scattering by halogen-containing molecules CF3X (X = H, F, Cl, Br, I) has been performed with impact energy and scattering angle ranging from 1.5 to 100 eV and 15 to 130°, respectively. Three of the results of these experiments are described in the present report. Firstly, a clear difference is demonstrated in the elastic-scattering cross section angular distributions of polar and nonpolar molecules with the substitution of one of the F atoms in CF4 for a H, Cl, Br or I atom. Secondly, vibrational excitation spectra of the unresolved composite modes (mainly CF3 stretching) for CF3X reveal a common broad structure in the region from 7 to 9 eV due to shape resonance. The third result presented is the observation of a low-lying electronic state of CF3Cl, CF3Br, and CF3I. This feature is enhanced at lower incident energies and larger scattering angles. Also discussed are some preliminary results on the formation of negative and neutral fragments from SiF4 and CH4 by electron impact.
Źródło:
Nukleonika; 2003, 48, 2; 89-93
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hospital based injury surveillance system for low and middle income countries
Autorzy:
Amaratunga, T.
Cho, Y. I.
Jayatilleke, A.U.
Ichikawa, M.
Nakahara, S.
Marasinghe, A.
Powiązania:
https://bibliotekanauki.pl/articles/333049.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
system nadzoru urazów
injury surveillance system
Opis:
Injuries are a major cause of death around the globe. According to statistics, around 5 million people die each year world wide remaining another few millions disabled due to injuries. The world health organizations reveals that more than 90% of the injury related deaths are from low and middle income countries. But the worrying factor is that the most of the injury related deaths in these countries could have been prevented with a concerted effort. Most of the developed countries use injury surveillance systems to monitor injury cases and take preventive measures. However, low and middle income countries can not afford for such systems because of the lack of funds and basic infrastructure, like Internet. This paper proposes an effective injury surveillance system for those countries which can be functioned with minimum resources and minimum cost.
Źródło:
Journal of Medical Informatics & Technologies; 2009, 13; 101-105
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pressure Investigation of Tunneling in an InAlAs-InGaAs Double Barrier Structure
Autorzy:
Cury, L.
Dmowski, L. H.
Celeste, A.
Portal, J. C.
Davies, M.
Heath, M.
Sivco, D. L.
Cho, A. Y.
Powiązania:
https://bibliotekanauki.pl/articles/1879918.pdf
Data publikacji:
1991-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
07.35.+k
73.20.Dx
79.80.+w
Opis:
AnIn$\text{}_{0.52}$Al$\text{}_{0.48}$As-In$\text{}_{0.53}$Ga$\text{}_{0.47}$As double-barrier structure was studied under hydrostatic pressures up to 15 kbar. Two resonances in the I(V) curves are observed. The possible tunneling mechanisms to interpret this effect are analysed.
Źródło:
Acta Physica Polonica A; 1991, 79, 2-3; 199-202
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies