Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Chen, F" wg kryterium: Autor


Tytuł:
XANES Study of La$\text{}_{0.75-x}$Gd$\text{}_{x}$Ca$\text{}_{0.25}$MnO$\text{}_{3-δ}$ Solid Solutions
Autorzy:
Drozd, V. A.
Pęka̶a, M.
Liu, R. S.
Lee, J.-F.
Chen, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/2046755.pdf
Data publikacji:
2006-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.47.Lx
61.10.Ht
Opis:
A series of solid solutions La$\text{}_{0. 75-x}$Gd$\text{}_{x}$Ca$\text{}_{0.25}$MnO$\text{}_{3-δ}$ with 0.0≤x≤0.75 was prepared via carbonate precursor precipitation method. Final sintering was performed at 1250ºC in oxygen flow atmosphere. The samples obtained were characterized by scanning electron microscope, X-ray diffraction measurements. Oxygen stoichiometry was analyzed by iodometric titration method. X-ray absorption spectroscopic methods of Mn L-edge and Mn K-edge X-ray absorption near edge structure were used to study oxidation state of manganese in the solid solutions and elucidate features of their local crystal structure. Orthorhombic crystal structure characteristics of the solid solutions were refined by Rietveld method. An increase in oxygen deficiency and average manganese oxidation state were found to accompany Gd concentration increase in La$\text{}_{0.75-x}$Gd$\text{}_{x}$Ca$\text{}_{0.25}$MnO$\text{}_{3-δ}$. These results are consistent with Mn L-edge X-ray absorption near edge structure spectra, where a gradual change of Mn oxidation state with Gd concentration increase was detected. Origins of oxygen deficiency La$\text{}_{0.75- x}$Gd$\text{}_{x}$Ca$\text{}_{0.25}$MnO$\text{}_{3-δ}$ are discussed in terms of structural disorder caused by Gd substitution for La.
Źródło:
Acta Physica Polonica A; 2006, 109, 4-5; 583-589
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of nanofiltration membranes to concentrate and recover leached aluminum from acidified water treatment sludge
Autorzy:
Cheng, W. P.
Chen, P. H.
Tian, D. R.
Yu, R. F.
Fu, C. H.
Powiązania:
https://bibliotekanauki.pl/articles/208030.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
water purification
nanofiltration
acidic solutions
leaching
roztwory kwaśne
oczyszczanie wody
nanofiltracja
ługowanie
glin
Opis:
The recovery of aluminum from water purification sludge is usually performed by making the solution acidic or basic. However, for economic reasons and reasons of safety, excessive doses of acid or base should not be utilized. Accordingly, the aluminum concentration in the leached solution is typically limited, thus the recovered aluminum cannot be directly reused as a coagulant. A nanofiltration (NF) membrane can be used in the acidic solution to concentrate high-valence metal ions. There-fore, in this work, H2SO4 was utilized to leach Al3+ ions from water purification sludge. Then, the Al3+ ion solution was concentrated using a low-price NF membrane. The effect of natural organic matter on the Al3+ ion concentrating efficiency in the filtration process has been elucidated. Experimental results reveal that Al3+ ions were effectively prevented from passing through the NF membrane, enabling a highly concentrated aluminum solution to be obtained. However, the presence of organic compounds may reduce the efficiency of the concentration of Al3+ ions in the solution.
Źródło:
Environment Protection Engineering; 2016, 42, 3; 19-32
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Unravelling the Effect of Anthraquinone Metal Salts as Wide-range Plateau Catalysts to Enhance the Combustion Properties of Solid Propellants
Autorzy:
Wang, Y.
Yan, Q.-L.
An, T.
Chen, B.
Ji, Y.-P.
Wang, W.
Zhao, F.
Powiązania:
https://bibliotekanauki.pl/articles/358042.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
solid propellants
burning rate catalysts
anthraquinone metal salts
wide-range plateau combustion
Opis:
Novel lead and copper salts based on anthraquinone, including 1,8-dihydroxyanthraquinone,1,4,5,8-tetrahydroxyanthraquinone and 1,8-dihydroxy-4,5-dinitroanthraquinone, were prepared and characterized by Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), and X-ray fluorescence (XRF). The catalytic effects of these compounds on the decomposition of nitrocellulose (NC) and on the combustion properties of double-base (DB) and composite modified double-base (CMDB) propellants were comprehensively investigated. The results demonstrated that the burning rate is significantly increased (by 200%) in the lower pressure range (2-6 MPa) as compared to the control systems without added anthraquinone-based salts. Concurrently, the pressure exponents (n) were obviously lower, exhibiting a “wide-range plateau” combustion phenomenon in the middle-pressure region. Specifically, for the DB propellants such a plateau region extended from 10 MPa to 16 MPa for n equal to 0.10, from 10 MPa to 18 MPa for n equal to 0.11 and from 8 MPa to 18 MPa when n is 0.05. In the case of RDX-CMDB propellants, the plateau was found to be in the range 6-18 MPa, with n in the range 0.16-0.27, depending on the type of catalyst, in contrast to the reference CMDB sample, which was characterized by n equal to 0.7 for the same pressure range.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 2; 376-390
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Towards the building information modeling-based capital project lifecycle management in the luxury yacht industry
Autorzy:
Liu, F.
Chen, C.
Wu, W.
Powiązania:
https://bibliotekanauki.pl/articles/259822.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
building information modelling
luxury yacht
communication
interoperability
capital
project lifecycle management
framework
Opis:
It will be a new approach that BIM’s capital project lifecycle management (CPLM) applied to the yacht industry. This paper explored the feasibility of applying the principles and rationales of BIM for capital project lifecycle management in luxury yacht design, engineering, fabrication, construction and operation. The paper examined the premises and backbone technology of BIM. It then evaluated leading naval engineering and shipbuilding software applications and their development trends from the functional lens of BIM. To systematically investigate a BIM-based approach for capital project lifecycle management (CPLM) in the luxury yacht industry, the paper proposed and outlined an implementation framework. A case study and a student competition use case were discussed to delineate the core constituents and processes of the proposed framework. The case of BIM was reviewed. Through the domestic custom luxury yacht design and prototyping student competition, the application of this framework in educational research is demonstrated and the initial quantitative assessment of the framework is carried out. Conclusions: a BIM-based CPLM implementation framework can help the luxury yacht industry capitalize on the global transformation to an information-centric and data-driven new business paradigm in shipbuilding with integrated design, manufacturing and production.
Źródło:
Polish Maritime Research; 2017, S 3; 41-48
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The response of cyclonic eddies to typhoons based on satellite remote sensing data for 2001-2014 from the South China Sea
Autorzy:
Yu, F.
Yang, Q.
Chen, G.
Li, Q.
Powiązania:
https://bibliotekanauki.pl/articles/48316.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
satellite remote sensing
tropical cyclone
kinetic energy
typhoon
spatial distribution
quantitative analysis
South China Sea
Źródło:
Oceanologia; 2019, 61, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructural Evolution in HMX Based Plastic-bonded Explosive During Heating and Cooling Process: an in situ Small-angle Scattering Study
Autorzy:
Yan, G.
Tian, Q.
Liu, J.
Fan, Z.
Sun, G.
Zhang, C.
Wang, Y.
Chen, B.
Gong, J.
Zhou, X.
Yang, Z.
Nie, F.
Li, J.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358618.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
SANS
SAXS
HMX-PBX
thermal damages
phase transition
Opis:
The thermal damage in octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based plastic-bonded explosive (PBX) was investigated using in situ small-angle neutron and X-ray scattering techniques. The microstructural evolution was quantitatively characterized by the model fitting parameters of total interfacial surface area (Sv) and void volume distribution. The Sv of HMX-PBX decreased markedly above 100 °C, indicating the movement of binder into the voids. After subsequent cooling to room temperature, the scattering intensity increased significantly with increasing storage time, and a new population of voids with average diameter of 20 nm was observed, accompanied by the gradual phase transition of HMX from δ- to β-phase. The experimental results implied that serious damage within the HMX-PBX was developed during storage after heating.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 916-926
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The halobiid bivalve genus Enteropleura and a new species from the Middle Anisian of Guangxi, Southern China
Autorzy:
Chen, J
Stiller, F.
Powiązania:
https://bibliotekanauki.pl/articles/20942.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Anisian
Enteropleura
Triassic
halobiid bivalve
Middle Anisian
Bivalvia
China
Guangxi
new species
Southern China
Halobiidae
paleontology
Opis:
Enteropleura is a short−ranged early Middle Triassic bivalve genus, of importance with regard to biostratigraphy and the phylogeny of the Halobiidae. It comprises five species from the Alps, the Dinarides, Nevada, and southwestern China. Enteropleura walleri sp. nov. from the Fengshan District, northwestern Guangxi, southwestern China, occurs in the central area of the Triassic Nanpanjiang Basin. The new species is of late Middle Anisian age, penecontemporaneous to the species from Europe and Nevada. Morphologically, E. walleri sp. nov. is similar to Enteropleura jenksi from Nevada, Enteropleura bittneri from Austria, and Enteropleura lamellosa from Croatia, but it differs significantly from Enteropleura guembeli from Hungary. Two species−groups of Enteropleura thus may be differentiated, E. guembeli group and E. bittneri group. Re−examination of E. guembeli reported from the Anisian basin slope facies in Guizhou, southwestern China, confirms its taxonomic status.
Źródło:
Acta Palaeontologica Polonica; 2007, 52, 1
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of surface functional groups of nanosilica on the properties of polyamide 6/SiO2 nanocomposite
Autorzy:
Xu, Q.
Chen, F.
Li, X.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/779538.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
nanosilica
polyamide 6
nanocomposite
in situ polymerization
Opis:
The present study investigated the effect of the surface functional groups of nanosilica on the interfacial, crystallization, and thermal stability of polyamide 6/SiO2 (PA6/SiO2) nanocomposite, in which nanosilica was modified in situ with both 3-triethoxysilylpropylamine and 3-methacryloxypropyltrimethoxy silane¬ (KH-550 and KH-570). The FTIR analysis results showed the chemical bonding action between the reacting amino groups of nanosilica and end carboxyl groups of polyamide 6 enhanced with increasing the ratio of KH-550 and KH-570. The XRD spectrum indicated that the crystal structure of PA6/SiO2 nanocomposites tended to form α crystal type that was beneficial to an improvement of mechanical properties, and which was in agreement with the results of mechanical strength measurements. It was also found that crystallization temperature and crystallization rate of PA6/SiO2 nanocomposites were lower than that of neat polyamide 6.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 3; 20-24
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Bending, Impact Fracture Behavior and Characteristics of Stainless Steel Clad Plates with Different Rolling Temperature
Autorzy:
An, Q.
Fan, K. Y.
Ge, Y. F.
Liu, B. X.
He, J.
Wang, S.
Chen, C. X.
Ji, P. G.
Tolochko, O.
Powiązania:
https://bibliotekanauki.pl/articles/2049433.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel clad plate
interface characteristics
bending behavior
impact morphologies
delamination crack
Opis:
The interface characteristics, bending and impact behavior, as well as fracture characteristics of stainless steel clad plates fabricated by vacuum hot rolling at different rolling temperatures of 1100°C, 1200°C and 1300°C are investigated in detail. The interface bonding strength is gradually increased with the increasing rolling temperature due to the sufficient diffusion behavior of alloy element. The bending toughness and impact toughness are gradually decreased, while the bending strength increase with the increase of the rolling temperature, which is attributed to mechanisms of matrix softening and interface strengthening at high rolling temperature. Due to the weak interface at 1100°C, the bending and impact crack propagation path was displaced by delamination cracks, which in turn lead to reduction in stress intensity of the main crack, playing an effective role in toughening the stainless steel clad plates. Moreover, the impact fracture morphologies of clad plates show a typical ductile-brittle transition phenomenon, which is attributed to the matrix softening behavior with the increasing rolling temperature.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 229-239
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ternary wavelets and their applications to signal compression
Autorzy:
Mustafa, G.
Chen, F.
Huang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/907403.pdf
Data publikacji:
2004
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
schemat podziału
falki
kompresja sygnału
subdivision
wavelets
multiresolution
signal compression
Opis:
We introduce ternary wavelets, based on an interpolating 4-point C2 ternary stationary subdivision scheme, for compressing fractal-like signals. These wavelets are tightly squeezed and therefore they are more suitable for compressing fractal-like signals. The error in compressing fractal-like signals by ternary wavelets is at most half of that given by four-point wavelets (Wei and Chen, 2002). However, for compressing regular signals we further classify ternary wavelets into 'odd ternary' and 'even ternary' wavelets. Our odd ternary wavelets are better in part for compressing both regular and fractal-like signals than four-point wavelets. These ternary wavelets are locally supported, symmetric and stable. The analysis and synthesis algorithms have linear time complexity.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2004, 14, 2; 233-240
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Summer distribution patterns of Trichodesmium spp. in the Changjiang (Yangtze River) Estuary and adjacent East China Sea shelf
Autorzy:
Jiang, Z.
Chen, J.
Zhou, F.
Zhai, H.
Zhang, D.
Yan, X.
Powiązania:
https://bibliotekanauki.pl/articles/47907.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
Trichodesmium
Yangtze River
estuary
China Sea
trichome
biogeochemistry
environment parameter
sea surface temperature
salinity
Opis:
To examine the distribution of Trichodesmium relative to physicochemical factors during summer in the Changjiang (Yangtze River) Estuary and adjacent East China Sea shelf, three cruises were conducted separately in June 2009, July 2011, and August 2009. Trichodesmium species found were T. thiebautii, T. erythraeum, and T. hildebrandtii. The population was dominated by T. thiebautii, which accounted for >85% of the samples found. Most of them were free trichomes. Colonial forms were rarely observed (approximately 10% of our samples), occurring only in offshore waters. The depth integrated abundances of Trichodesmium were 308 × 103, 1709 × 103, and 3448 × 103 trichomes m−2 in June, July, and August, respectively. Trichodesmium was distributed abundantly in the southern or southeastern part of our study area, where nutrients were low and light penetration, temperature, and salinity were high, which were influenced by the Taiwan Warm Current (TWC) and Kuroshio. Trichodesmium was found in low abundance in inshore, eutrophic, low-salinity waters, which were mainly controlled by the Changjiang Diluted Water (CDW) and coastal current. These results suggest that spatiotemporal changes in the summer Trichodesmium distribution correlate highly with the variations in physicochemical properties that are primarily controlled by the TWC, Kuroshio, and CDW. The summer N2 fixation rate of Trichodesmium was estimated at 12.3 μmol N m−2 d−1 in our study area, contributing >50% of biological N2 fixation.
Źródło:
Oceanologia; 2017, 59, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spectral degrees of cross-polarization of stochastic anisotropic electromagnetic beams in modified non-Kolmogorov atmospheric turbulence
Autorzy:
Chen, F.
Chen, J.
Zhao, Q.
Chen, Y
Xin, Y.
Li, J.
Pan, H.
Powiązania:
https://bibliotekanauki.pl/articles/174614.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
quasi-homogenous source
modified non-Kolmogorov turbulence
generalized Stokes parameters
Opis:
Based on the extended Huygens–Fresnel principle, variations in generalized Stokes parameters of stochastic anisotropic electromagnetic beams propagating through modified non-Kolmogorov atmospheric turbulence have been analyzed. The changes in generalized Stokes parameters with different turbulence parameters and source parameters were analyzed first. After that, the distributions of the spectral degrees of cross-polarization (SDCP) of isotropic beams and anisotropic beams were simulated. The results show that the profiles of distribution of SDCP of these two kinds of beams are very different in the near field, and will fluctuate through the propagation in atmospheric turbulence, but at last, when the propagation distance is long enough, the difference in the source makes a slight difference in the final profiles of SDCP in the output plane. They mainly depended on the turbulence perturbation, and in the weak turbulence, the profiles of final distribution show more flatter features.
Źródło:
Optica Applicata; 2013, 43, 4; 773-783
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Risk assessment for industrial control systems quantifying availability using mean failure cost (MFC)
Autorzy:
Chen, Q.
Abercrombie, R. K.
Sheldon, F. T.
Powiązania:
https://bibliotekanauki.pl/articles/91644.pdf
Data publikacji:
2015
Wydawca:
Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych
Tematy:
Industrial Control Systems
ICS
SCADA systems
industry
data acquisition
supervisory control
IT network
mean failure cost
MFC
security
risk assessment
systemy automatyki przemysłowej
systemy SCADA
przemysł
pozyskiwanie danych
sprawowanie nadzoru
sieć IT
bezpieczeństwo
ocena ryzyka
Opis:
Industrial Control Systems (ICS) are commonly used in industries such as oil and natural gas, transportation, electric, water and wastewater, chemical, pharmaceutical, pulp and paper, food and beverage, as well as discrete manufacturing (e.g., automotive, aerospace, and durable goods.) SCADA systems are generally used to control dispersed assets using centralized data acquisition and supervisory control. Originally, ICS implementations were susceptible primarily to local threats because most of their components were located in physically secure areas (i.e., ICS components were not connected to IT networks or systems). The trend toward integrating ICS systems with IT networks (e.g., efficiency and the Internet of Things) provides significantly less isolation for ICS from the outside world thus creating greater risk due to external threats. Albeit, the availability of ICS/SCADA systems is critical to assuring safety, security and profitability. Such systems form the backbone of our national cyber-physical infrastructure. Herein, we extend the concept of mean failure cost (MFC) to address quantifying availability to harmonize well with ICS security risk assessment. This new measure is based on the classic formulation of Availability combined with Mean Failure Cost (MFC). The metric offers a computational basis to estimate the availability of a system in terms of the loss that each stakeholder stands to sustain as a result of security violations or breakdowns (e.g., deliberate malicious failures).
Źródło:
Journal of Artificial Intelligence and Soft Computing Research; 2015, 5, 3; 205-220
2083-2567
2449-6499
Pojawia się w:
Journal of Artificial Intelligence and Soft Computing Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on radiation characteristics of plasma Yagi antenna based on AIS base station in ships’ routeing waters
Autorzy:
Sun, Y.
Chen, Y.
Kong, F.
Wei, Y.
Zhan, F.
Zhao, J. S.
Powiązania:
https://bibliotekanauki.pl/articles/117021.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
radio navigation
radiation characteristics
plasma Yagi antenna
ships routeing
AIS base station
AIS based shipping routes
ships routeing waters
Automatic Identification System (AIS)
Opis:
A Yagi plasma antenna model was established by HFSS according to the relationship between plasma dielectric constant and electron density. The patterns were simulated by changing plasma parameters and the number of director dipoles. Results show that when the passive vibrators were switched off, the antenna is omnidirectional antenna. The directionality increases with the increase of the number of passive dipole and the main lobe of which narrows down. Then the plasma Yagi antenna model is established by plasma tube, the gain changed by changing the number of passive dipoles, so the plasma Yagi antenna has a very good reconfigurability. Results prove that the feasibility of the plasma Yagi antenna can be used on AIS base station of Ships’ Routeing waters. It can promote the communication and capability of maritime supervision in Ships’ Routeing waters.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2020, 14, 1; 179-184
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability analysis of machining center based on the field data
Analiza niezawodnościowa centrum obróbkowego w oparciu o dane terenowe
Autorzy:
Yang, Z. J.
Chen, Ch. H.
Chen, F.
Hao, Q. B.
Xu, B. B.
Powiązania:
https://bibliotekanauki.pl/articles/302160.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
analiza uszkodzeń
centrum obróbkowe
polityka utrzymania ruchu
proces spełniający prawo potęgowe
system naprawialny
failure analysis
machining center
maintenance policy
power-law process
repairable system
Opis:
Machining center is the complex machinery, with high level automation and complicated structures, so there are lots of failures. When a random failure occurs, the failed machining center stops and causes a production line or even the whole workshop to stop functioning. The frequent failure leads to the low levels of reliability and production rate. In order to help users and manufacturers optimize maintenance policy to improve the reliability for machining center, this paper presents descriptive statistics of the failure data and develops the failure trend using power-law process, simultaneously establishes the routine inspection and regular inspection as well as the sequential preventive maintenance under maintenance cost constraints. The proposed model could be a useful tool to assess the current conditions, predict reliability and optimize the machining center maintenance policy.
Centrum obróbkowe to skomplikowany mechanizm o wysokim poziomie automatyzacji oraz złożonej konstrukcji, w związku z czym ulega licznym uszkodzeniom. Przy wystąpieniu przypadkowej awarii, uszkodzone centrum obróbkowe przestaje działać i powoduje zatrzymanie linii produkcyjnej a nawet całego oddziału produkcyjnego. Częste awarie obniżają poziom niezawodności oraz tempo produkcji. Aby pomóc użytkownikom i producentom zoptymalizować politykę utrzymania ruchu w celu poprawy niezawodności centrów obróbkowych, w niniejszym artykule przedstawiono statystyki opisowe dotyczące danych o uszkodzeniach i opracowano trend uszkodzeń w oparciu o proces spełniający prawo potęgowe. Jednocześnie ustalono zasady rutynowej inspekcji i okresowych przeglądów, jak również sekwencyjnej obsługi zapobiegawczej przy ograniczonych wydatkach na utrzymanie ruchu. Proponowany model może być użytecznym narzędziem dla potrzeb oceny aktualnych warunków oraz przewidywania niezawodności w celu optymalizacji polityki utrzymania ruchu centrum obróbkowego.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 2; 147-155
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies