Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Aydın, S." wg kryterium: Autor


Tytuł:
Improvement of Anode/HTL Interface Properties Using Self-Assembled Monolayer in Organic Electronic Devices
Autorzy:
Yaman, M.
Yagmurcukardes, N.
Havare, A.
Aydin, H.
Ocakoglu, K.
Okur, S.
Powiązania:
https://bibliotekanauki.pl/articles/1400034.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.40.Qv
Opis:
Fabrication and characterization of highly efficient organic light-emitting diode with surface modification of indium tin oxide anodes by using self-assembled monolayer technique have been studied. Four different self-assembled molecules, K-28 ruthenium complex, octadecylamine hydrochloride, octadecyltrichlorosilane and mercaptohexdecanoic acid are used to modify ITO surface to improve the interface properties. Space charge limited currents measurements have been used to evaluate carrier mobility under steady state current. The results show that the surface properties such as the stability of ITO anode layer have significant effects on charge injection in organic light-emitting diode devices.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 459-460
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iron (Fe) and iron chlorosis in plant nutrition
Zelazo ( Fe) i jego deficyt w zywieniu roslin
Autorzy:
Talas, Y.
Aydin, S.
Yegenoglu, E.D.
Simsek, H.
Powiązania:
https://bibliotekanauki.pl/articles/81413.pdf
Data publikacji:
2016
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Horticulture and Landscape Architecture; 2016, 37
1898-8784
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Horticulture and Landscape Architecture
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On multiplicative (generalized) - derivations and central valued conditions in prime rings
Autorzy:
Sandhu, Gurninder S.
Ayran, Ayşe
Aydin, Neşet
Powiązania:
https://bibliotekanauki.pl/articles/2052381.pdf
Data publikacji:
2021
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
prime ring
multiplicative generalized derivation
one-sided ideal
commutativity
teoria pierścieni
ideał jednostronny
przemienność
Opis:
Let R be a prime ring with multiplicative (generalized)- derivations (F, f) and (G, g) on R. This paper gives a number of central valued algebraic identities involving F and G that are equivalent to the commutativity of R under some suitable assumptions. Moreover, in order to optimize our results, we show that the assumptions taken cannot be relaxed.
Źródło:
Journal of Mathematics and Applications; 2021, 44; 93--105
1733-6775
2300-9926
Pojawia się w:
Journal of Mathematics and Applications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prediction of Fracture Stress with Regard to Porosity in Cast A356 Alloy
Autorzy:
Sahin, H.
Atik, M.
Tezer, F.
Temel, S.
Aydin, O.
Kesen, O.
Gursoy, O.
Dispinar, Derya
Powiązania:
https://bibliotekanauki.pl/articles/2079787.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
A356
casting defects
mechanical properties
porosity
fracture stress
Bifilm
stop A356
wady odlewnicze
właściwości mechaniczne
porowatość
naprężenia
Opis:
Production of the defect-free casting of aluminium alloys is the biggest challenge. Porosity is known to be the most important defect. Therefore, many cast parts are subjected to several non-destructive tests in order to check their acceptability. There are several standards, yet, the acceptance limit of porosity size and distribution may change according to the customer design and requirements. In this work, the aim was targeted to evaluate the effect of size, location, and distribution of pores on the tensile properties of cast A356 alloy. ANSYS software was used to perform stress analysis where the pore sizes were changed between 0.05 mm to 3 mm by 0.05 mm increments. Additionally, pore number was changed from 1 to 5 where they were placed at different locations in the test bar. Finally, bifilms were placed inside the pore at different sizes and orientations. The stress generated along the pores was recorded and compared with the fracture stress of the A356 alloy. It was found that as the bifilm size was getting smaller, their effect on tensile properties was lowered. On the other hand, as bifilms were larger, their orientation became the dominant factor in determining the fracture.
Źródło:
Archives of Foundry Engineering; 2021, 21, 4; 21-28
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of Cycling Stability of $LiMn_2O_4$ Cathode by $Al_2O_3$ Surface Coating for Li-Ion Batteries
Autorzy:
Şahan, H.
Göktepe, H.
Kılıç Dokan, F.
Aydın, A.
Veziroğlu, S.
Patat, Ş.
Powiązania:
https://bibliotekanauki.pl/articles/1399895.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
88.80.ff
Opis:
The effect of the $Al_2O_3$ coating on the charge-discharge cycling performance of spinel powder ($LiMn_2O_4$) was investigated in the range of 3.5-4.5 V at 1C. The $Al_2O_3$ coating on the surface of the spinel powder was carried out using the solution method, followed by 500C for 6 h in air. Powder X-ray diffraction pattern of the $Al_2O_3$-coated spinel $LiMn_2O_4$ showed that the $Al_2O_3$ coating medium was not incorporated in the spinel bulk structure. Scanning electron microscopy results showed that the $Al_2O_3$ coating particles were homogeneously distributed on the surface of $LiMn_2O_4$ powder particles. The $Al_2O_3$-coated $LiMn_2O_4$ retained 92.3% of its original capacity after 30 cycles, showing much better cycle ability than the bare lithium manganese oxide. The improvement of electrochemical performance is attributed to suppression of $Mn^{2+}$ dissolution into electrolyte via $Al_2O_3$ layer.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 368-370
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of cold storage on the bioactive components and physical properties of caucasian whortleberry (Vaccinium arctostaphylos l.). a preliminary study
Wpływ przechowywania w chłodni na bioaktywne składniki i właściwości fizyczne borówki kaukaskiej (Vaccinium arctostaphylos l.) badanie wstępne
Autorzy:
Ozturk, B.
Karakaya, O.
Celik, S.M.
Karakaya, M.
Guler, S.K.
Yarilgac, T.
Aydin, H.
Ozturk, A.
Powiązania:
https://bibliotekanauki.pl/articles/11543339.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
In this study, antioxidant activity (AA), total phenolics (TP), total flavonoids (TF), individual phenolic compounds (IPCs), vitamin C and six other fruit characteristics including weight loss, flesh firmness, color, soluble solids content (SSC), dry matter and titratable acidity (TA) of Caucasian whortleberry fruits (Vaccinium arctostaphylos L.) were determined at harvest and at a week postharvest intervals throughout the cold storage at 0°C for 4 weeks. Significant decreases were observed in fruit weight and flesh firmness during the cold storage period. While L* and chroma values decreased significantly, an increase was observed in hue angle values. Significant increases were observed in dry matter, but decreases were observed in SSC, TA and vitamin C contents. Caucasian whortleberry fruits had quite high polyphenol contents. Total phenolics (TP), total flavonoids (TF), antioxidant activity (AA) (according to ABTS+, DPPH· and FRAP antioxidant tests) and individual phenolic compounds (IPCs) significantly decreased throughout the cold storage. Chlorogenic acid was the major phenolic in Caucasian whortleberry fruits. It was concluded that Caucasian whortleberry fruits with high phenolic compound and flavonoid levels might serve a potential antioxidant source.
Zbadano aktywność antyoksydacyjną (AA), całkowitą zawartość fenoli (TP), flawonoidów (TF), indywidualnych związków fenolowych (IPC), witaminy C oraz sześć innych cech, takich jak utrata wagi, zwartość miąższu, barwa, zawartość rozpuszczalnych substancji stałych (SSC), sucha masa oraz kwasowość (TA) owoców borówki kaukaskiej (Vaccinium arctostaphylos L.) podczas zbioru oraz z tygodniowymi przerwami po zbiorach w czasie całego okresu przechowywania w chłodni w temperaturze 0°C przez 4 tygodnie. Zaobserwowano istotny spadek masy owoców i zwartości miąższu podczas okresu przechowywania w chłodni. Wartości barwy zmniejszyły się istotnie, natomiast zaobserwowano wzrost wartości kąta odcienia. Zaobserwowano istotny wzrost suchej masy, ale spadek został zanotowany w zawartości SSC, TA oraz witaminy C. Owoce borówki kaukaskiej miały dość wysoką zawartość polifenoli. Całkowita zawartość fenoli (TP), flawonoidów (TF), aktywność antyoksydacyjna (AA) (według testów antyoksydacyjnych ABTS+, DPPH· i FRAP) oraz indywidualne związki fenolowe (IPC) istotnie zmniejszyły się w okresie przechowywania w chłodni. Kwas chlorogenowy był głównym fenolem w owocach borówki kaukaskiej. Wyciągnięto wniosek, że owoce borówki kaukaskiej o wysokim poziomie związków fenolowych i flawonoidów mogą służyć za potencjalne źródło antyoksydantów.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2016, 15, 2; 77-93
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Multiple Cation (Al, Si, Ti, Co) Doping on Electrochemical Performance οf $LiMn_2O_4$ Cathode Active Material
Autorzy:
Kılıç Dokan, F.
Şahan, H.
Veziroğlu, S.
Akkuş Taş, N.
Aydın, A.
Patat, Ş.
Powiązania:
https://bibliotekanauki.pl/articles/1399894.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
88.80.ff
Opis:
In order to improve the cycling performance of $LiMn_2O_4$, the spinel phases base and multiple cation doped $LiMn_{1.95}Al_{0.0125}Si_{0.0125}Ti_{0.0125}Co_{0.0125}O_4$, $LiMn_{1.9}Al_{0.025}Si_{0.025}Ti_{0.025}Co_{0.025}O_4$ spinels were synthesized by the glycine-nitrate combustion process. The structures of the products were investigated by X-ray diffraction, scanning electron microscopy and electrochemical tests.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 365-367
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of fluorine and tungsten co-doping on optical, electrical and structural properties of tin (IV) oxide thin films prepared by sol–gel spin coating method
Autorzy:
Keskenler, E F
Turgut, G
Aydin, S.
Dogan, S
Duzgun, B
Powiązania:
https://bibliotekanauki.pl/articles/175016.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tin (IV) oxide (SnO2)
fluorine (F) and tungsten (W) co-doping
sol-gel
Opis:
Fluorine and tungsten co-doped tin (IV) oxide (WFTO) thin films have been prepared first time by a sol–gel spin coating method. The effect of F and W co-dopant ratio on optical, electrical and structural properties of SnO2 was investigated. It was found that the optical properties of the films were obviously affected by the co-dopant ratio. When the F:W co-dopant ratio increases from 0.25:0.25 to 0.75:0.50, the transmittance in the short wavelengths slightly increases and transmittance edge shifts towards shorter wavelength. With an increase in the co-dopant ratio, the reduction and red shifts in the optical transmittance edge are very obvious at all wavelengths. Transmittance values at 550 nm for the films have varied between 79.64% and 50.20%. The indirect and direct band gap values for WFTO-1, WFTO-2, WFTO-3 and WFTO-4 samples were calculated to be 3.73, 3.79, 3.48, 3.40 eV and 4.03, 4.04, 3.98, 3.97 eV, respectively. The crystal structure of the films has been investigated by X-ray diffraction patterns. It has been observed that WFTO-1 and WFTO-2 samples have (111) preferential orientation corresponding to SnO2 cubic phase. This orientation almost disappears and changes to tetragonal phase (110) orientation for WFTO-3 and WFTO-4. To the best of our knowledge, this is the first cubic structure observation for SnO2 grown by the sol–gel technique. The electrical properties were also changed with co-doping ratio. The best optical, electrical and structural properties were obtained for mole ratio 0.75:0.50 (F:W).
Źródło:
Optica Applicata; 2013, 43, 4; 663-677
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical and Structural Properties of Bismuth Doped ZnO Thin Films by Sol-Gel Method: Urbach Rule as a Function of Crystal Defects
Autorzy:
Keskenler, E.
Aydın, S.
Turgut, G.
Doğan, S.
Powiązania:
https://bibliotekanauki.pl/articles/1205375.pdf
Data publikacji:
2014-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.20.-e
78.66.Hf
78.40.Fy
78.66.Jg
68.37.Yz
68.55.ag
68.60.Bs
Opis:
Bismuth (Bi) doped zinc oxide (ZnO:Bi) thin films were prepared on glass substrates by sol-gel spin coating technique using homogeneous precursor solutions, and effects of Bi doping on the structural and optical properties of ZnO were investigated. The crystalline of ZnO films shifted from polycrystalline nature to amorphous nature with Bi doping. The plane stresses (σ) for hexagonal ZnO and ZnO:Bi crystals were calculated according to the biaxial strain model. The Urbach rule was studied as a function of non-thermal component to the disorder (defects in crystal structures) which is especially observed in the case of non-crystal semiconductors. The calculated Urbach energies and steepness parameters of undoped ZnO and ZnO:Bi films varied between 44.33 meV and 442.67 meV, and 58.3 × $10^{-2}$ and 5.8 × $10^{-2}$, respectively. The Urbach energies of the films increased with an increase in the Bi doping concentration and a great difference was observed for 7.0 mol.% doping. The band gap values of the films exhibited a fluctuated behavior as a result of doping effect.
Źródło:
Acta Physica Polonica A; 2014, 126, 3; 782-786
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on Hardfacing Alloy Using Fe-Cr and Fe-B Powders
Autorzy:
Karip, E.
Aydin, S.
Muratoğlu, M.
Powiązania:
https://bibliotekanauki.pl/articles/1401952.pdf
Data publikacji:
2015-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.20.Vj
Opis:
The aim of this study is the investigation of the effect of ferroboron and ferrochromium with massive wire based hardfacing alloys. Mixture of Fe-Cr and Fe-B powders was added to massive wire during welding process. Hardface layers were obtained by three different powder mixture and three different powder/massive wire proportions. Hardfacing was applied to two AISI 1020 steel substrates by open arc welding. Hardness test, scanning electron microscope and X-ray diffraction analysis were made to the samples. Test results showed that increasing ferroboron content and increasing powder mixture amount enhanced the microhardness of the specimens.
Źródło:
Acta Physica Polonica A; 2015, 128, 2B; B-160-B-163
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and Optical Characterization of $TiO_2$ Thin Films Prepared by Sol-Gel Process
Autorzy:
Karabay, I.
Aydın Yüksel, S.
Ongül, F.
Öztürk, S.
Aslı, M.
Powiązania:
https://bibliotekanauki.pl/articles/1491461.pdf
Data publikacji:
2012-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.20.-e
81.20.Fw
61.05.cp
Opis:
Titanium dioxide $(TiO_2)$ thin films were prepared by spin coating technique of sol precursor on Corning 7059 glass substrates. Spectral transmittances of as deposited and annealed samples were measured in the range of 250 to 1100 nm. Optical band gaps were calculated from the Tauc plots and was found to be about 3.78 eV for the annealed samples at 500°C. X-ray diffraction patterns were performed with as deposited and annealed samples. By annealing the samples at 500C in various annealing times, the structure has changed from amorphous to the anatase crystalline state. Variations of the band gap energy values of $TiO_2$ films with cobalt doping were also investigated. Cobalt doping decreased the band gap value of $TiO_2$ films down to 3.25 eV. X-ray diffraction patterns were also given for the doped samples.
Źródło:
Acta Physica Polonica A; 2012, 121, 1; 265-267
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Different Organic Gelating Agents on Grain Size of ZnO Nanoparticles
Autorzy:
Karaal, Ş.
Köse, H.
Aydin, A.
Akbulut, H.
Powiązania:
https://bibliotekanauki.pl/articles/1218769.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.20.Fw
81.07.Bc
Opis:
In this work, sol-gel method was used in order to synthesize ZnO nanoparticles. $Zn(CH_3COO)_2$·$2H_2O$ was used to obtain ZnO precursor solution. To investigate the effect of organic gelating agents on grain size, various organic gelating agents such as triethanolamine (TEA), glycerin (GLY), ethylene glycol (EG), citric acid (CA) and tartaric acid (TA) were used. X-ray diffraction analysis was used for phase identification and grain size calculation. ZnO powders were characterized by using Fourier-transform infrared spectroscopy, scanning electron microscopy and atomic force microscopy.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 338-340
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pollen morphology in the tribe Nigelleae (Ranunculaceae): a worldwide palynological investigation into the species
Autorzy:
Isik, S.
Donmez, E.O.
Aydin, Z.U.
Donmez, A.A.
Powiązania:
https://bibliotekanauki.pl/articles/2117898.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
Garidella
Komaroffia
multivariate analysis
Nigella
Ranunculaceae
pollen morphology
Opis:
The pollen morphology of many collections of taxa of the tribe Nigelleae from the family Ranunculaceae which occur worldwide is presented in this study. A total of 88 specimens from 21 taxa, some of which were recently proposed, belonging to the genera Komaroffia, Garidella, and Nigella of Nigelleae were examined using light microscopy (LM) and scanning electron microscopy (SEM). In the tribe, the pollen type is mostly trizonocolpate, but in many taxa and specimens, both trizonocolpate and non-trizonocolpate types occur together. The pollen grains are small to medium (25–53.75 μm × 20–55 μm) in size and oblate to prolate in shape. The exine pattern at the mesocolpium in all the taxa investigated is similar: micro-echinate in LM and micro-echinate-punctate in SEM. The colpus membrane in Komaroffia and Nigella is micro-echinate in both LM and SEM. In Garidella, it is micro-echinate in LM but echinate (spinulose) in SEM. In this study, multivariate analyses, principal component analysis (PCA), and unweighted pair group method with arithmetic mean (UPGMA), were used to evaluate relationships between the genera and species within the tribe with respect to pollen morphology. PCA results show three main groups in the tribe: Garidella, Komaroffia, and Nigella. Moreover, the UPGMA tree also chiefly supports generic segregation into the smaller genera. An overall synthesis of the pollen characteristics of the three genera is provided and discussed.
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2019, 61, 1; 93-102
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical Characterizations of Schottky Diodes οn ITO Modified by Aromatic SAMs
Autorzy:
Havare, A.
Okur, S.
Yagmurcukardes, N.
Can, M.
Aydin, H.
Seker, M.
Demic, S.
Powiązania:
https://bibliotekanauki.pl/articles/1400033.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.20.Hb
73.20.Mf
73.21.-b
73.22.-f
73.25.+i
73.40.Ei
73.40.Jn
73.40.Ns
Opis:
In order to understand the electronic properties of the organic Schottky diode, ITO/TPD/Al and ITO/SAM/TPD/Al organic Schottky devices were fabricated to obtain current-voltage characteristics. From the slopes and y-axis intercepts of the plots, the values of the ideality factor, barrier heights of the ITO/SAM/TPD/Al diode were determined as 2.03 and 0.56 eV, respectively. The surface characterizations of modified and unmodified ITO were performed via atomic force microscopy.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 456-458
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Aging Procedure on Bonding Strength and Thermal Conductivity of Plywood Panels
Autorzy:
Demirkir, C.
Colakoglu, G.
Colak, S.
Aydin, I.
Candan, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1398989.pdf
Data publikacji:
2016-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
88.20.rp
87.85.jf
Opis:
Wood and wood composite materials have been used in house, school, and office construction throughout the world. Wood composite materials are superior to other building materials in terms of thermal conductivity due to its porous structure. Bonding strength and thermal conductivity are two of many other significant properties of composite panels used in construction. It was essential to determine the effect of ageing process on the properties of panels used in structural applications. This study evaluates thermal conductivity and bonding strength of Scots pine and black pine plywood panels manufactured from rotary cut veneers dried at three different temperatures: 110°C, 140°C, and 160°C. Phenol formaldehyde (PF) and melamine urea formaldehyde (MUF) were used as adhesives for plywood manufacturing. Panels were exposed to ageing process according to ASTM C 481-99 standard. Plywood panels with five plies and 10 mm thickness were manufactured for each group. Thermal conductivity and bonding strength values of plywood panels were determined. Thermal conductivity of the panels decreased with increase of the drying temperature. It was also found that the thermal conductivity of test panels decreased after the ageing process. Shear strength mean values obtained from the samples of all plywood panels were above the limit value (1.0 N/mm²) indicated in TS EN 314-2 standard but those of the panels with MUF after ageing process.
Źródło:
Acta Physica Polonica A; 2016, 129, 6; 1230-1234
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies