Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Augustyn, D." wg kryterium: Autor


Wyświetlanie 1-15 z 15
Tytuł:
Asymptotically error - optimal shape of sampling zone for query selectivity estimation method based on discrete cosine transform
Asymptotycznie optymalny kształt strefy próbkowania w metodzie szacowania selektywności zapytań, opartej na dyskretnej transformacie kosinusowej
Autorzy:
Augustyn, D. R.
Powiązania:
https://bibliotekanauki.pl/articles/375810.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
query selectivity estimation
probability density function
discrete cosine transform
calculus of variations
isoperimetric problem
Opis:
The problem of query selectivity estimation for database queries is critical for efficient query execution by database management systems. A query execution method strongly depends on early estimated size of a query result. This estimation determines a data access method used later during the query execution. The selectivity parameter is a fraction of table rows that satisfy a single-table query condition. For a selection condition of a range query where an attribute has a continuous domain, the selectivity is equivalent to a definite integral form probability density function (PDF) of attribute values distribution. For a compound selection condition based on many attributes we need a multidimensional space-efficient non-parametric estimator of multivariate PDF of attribute values distribution. A known approach based on Discrete Cosine Transform (DCT) spectrum as an representation of multidimensional PDF is considered. The energy compaction property of DCT lets omit a region of spectrum coefficients with small absolute values without significant losing an accuracy of selectivity estimation. An area of relevant spectrum coefficients is called a sampling zone. Results of experiments from previous works shows that applying the reciprocal shape of the sampling zone gives the least selectivity estimation error subject to a predetermined size of the zone. The main result of this work is a theoretical confirmation of only experimental results from previous works. The paper presents the proof of the theorem that the reciprocal shape of the sampling zone is asymptotically error-optimal. The proof is based on calculus of variations and the isoperimetric problem.
Szacowanie selektywności zapytań jest krytyczne dla efektywnej realizacji zapytań w systemach zarządzania bazami danych. Sposób realizacji zapytania zależy od wstępnego oszacowania rozmiaru danych spełniających kryteria zapytania. Takie oszacowanie pozwala wybrać metodę dostępu do danych użytą później podczas realizacji zapytania. Selektywność dla zapytań jednotablicowych to stosunek liczby wierszy spełniających kryteria zapytania do liczby wszystkich wierszy tablicy. Dla zakresowych warunków zapytania, określonych na atrybutach z ciągła dziedziną, selektywność jest całką oznaczoną z funkcji gęstości prawdopodobieństwa (PDF), określającej rozkład wartości tego atrybutu. Dla złożonych warunków zapytania, opartych na kilku atrybutach, istnieje potrzeba użycia nieparametrycznego estymatora wielowymiarowej PDF, którego reprezentacja powinna być oszczędna pod względem zajętości pamięci. Jedno ze znanych podejść do konstrukcji takiego estymatora oparte jest na dyskretnej transformacie kosinusowej (DCT) - tzn. widmie z histogramu wielowymiarowego. Własność kompakcji energii pozwala na pominięcie nieznaczących współczynników widma DCT bez istotnej utraty oszacowania selektywności. Obszar znaczących współczynników widma nazywany jest strefą próbkowania. Wyniki prac eksperymentalnych innych autorów wskazują, że dla zadanego rozmiaru reprezentacji widma, optymalną strefą próbkowania (kształtem strefy o najmniejszym błędzie oszacowania selektywności) jest tzw. strefa odwrotnie proporcjonalna. Głównym wynikiem tego opracowania jest teoretyczne potwierdzenie tych eksperymentów. Artykuł przedstawia dowód twierdzenia o asymptotycznej optymalności strefy odwrotnie proporcjonalnej dla przypadku dwuwymiarowego. Dowód opiera się na elementach rachunku wariacyjnego i zagadnieniu izoperymetrycznym.
Źródło:
Theoretical and Applied Informatics; 2012, 24, 1; 3-22
1896-5334
Pojawia się w:
Theoretical and Applied Informatics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Query-condition-aware V-optimal histogram in range query selectivity estimation
Autorzy:
Augustyn, D. R.
Powiązania:
https://bibliotekanauki.pl/articles/200079.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
query selectivity estimation
attribute values distribution
Query-Condition-Aware V-optimal histogram
Opis:
Obtaining the optimal query execution plan requires a selectivity estimation. The selectivity value allows to predict the size of a query result. This lets choose the best method of query execution. There are many selectivity obtaining methods that are based on different types of estimators of attribute values distribution (commonly they are based on histograms). The adaptive method, proposed in this paper, uses either attribute values distribution or range query condition boundaries one. The new type of histogram - the Query-Conditional-Aware V-optimal one (QCA-V-optimal) - is proposed as a non-parametric estimator of a probability density function of attribute values distribution. This histogram also takes into account information about already processed queries. This information is represented by the 1-dimensional Query Condition Distribution histogram (HQCD) which is an estimator of the include function PI which is also introduced in this paper. PI describes so-called regions of user interest, i.e. it shows how often regions of attribute values domain were used by processed queries. Advantages of the proposed method based on QCA-V-optimal are presented. Conducted experiments reveal small values of a mean relative selectivity estimation error comparing to the error values obtained by methods based on the relevant classical V-optimal histogram and Equi-height one.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 2; 287-303
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
SAMEE : the nonlinear adaptive method for predicting work effort of information systems development
SAMEE : nieliniowa adaptacyjna metoda predykcji pracochłonności wytworzenia systemów informatycznych
Autorzy:
Augustyn, D.
Warchal, L.
Powiązania:
https://bibliotekanauki.pl/articles/375691.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
adaptive method for work effort prediction
polynomial estimation model
software analysis and design
Enterprise Architect add-in
Opis:
At the early stage of information system analysis and design one of the challenge is to estimate total work effort needed, when only small number of analysis artifacts is available. As a solution we propose new method called SAMEE – Simple Adaptive Method for Effort Estimation. It is based on the idea of polynomial regression and uses selected UML artifacts like use cases, actors, domain classes and references between them. In this paper we describe implementation of this method in Enterprise Architect CASE tool and show simple example how to use it in real information system analysis.
We wczesnych etapach tworzenia systemu informatycznego szczególnie trudnym zadaniem jest wstępne oszacowanie pracochłonności wytworzenia całego systemu, gdy pierwszy, wstępny, analityczny opis systemu jest znikomy, tzn. gdy dostępne są jednie uproszczone artefakty analityczne (w sensie dostępności tylko niektórych rodzajów artefaktów i niskiej szczegółowości ich opisu). W niniejszym artykule zaproponowano metodę SAMEE (ang. Simple Adaptive Method for Effort Estimation), tzn. prostą adaptacyjną metodę szacowania pracochłonności, opartą na UML-owych artefaktach analitycznych takich jak: cechy systemu, przypadki użycia aktorzy, klasy dziedzinowe, referencje pomiędzy klasami. Na podstawie znajomości danych historycznych dotyczących pracochłonności realizacji cech oraz związanych z tymi cechami artefaktami (przypadki użycia, aktorzy, klasy, referencje) metoda określa nieliniowy model estymacji pracochłonności wytworzenia cech. Wykorzystując regresję wielomianową, metoda pozwala na znalezienie jawnej zależności pomiędzy pracochłonnością wytworzenia cech systemu, a innymi, wymienionymi wcześniej artefaktami. W szczególności metoda pozwala na wskazanie, który typ artefaktu ma najistotniejszy wpływ na estymowane pracochłonności cech. Metoda ma charakter adaptacyjny i lokalny, tzn. uzyskany model wynikowy zależny jest ściśle od organizacji procesu wytwórczego, zespołu produkcyjnego, przyjętych narzędzi wytwórczych. Artykuł opisuje również prototypową implementację metody SAMEE w postaci tzw. programowej wtyczki (ang.plug-in) do popularnego narzędzia CASE – Enterprise Architect – wspomagającego analizę i projektowanie systemów informatycznych. Dodatkowo, dzięki mechanizmowy profi li UML, odpowiednie artefakty (np. cechy) zostały wzbogacone o atrybuty wymagane do obsługi zaproponowanej metody estymacji. Taka integracja z narzędziem CASE pozwala myśleć o praktycznym zastosowaniu narzędzia do szacowania pracochłonności metodą SAMEE. Przykład konkretnego użycia SAMEE w narzędziu Enterprise Architect został zamieszczony w opracowaniu. W artykule opisano również potencjalne kierunki rozwoju metody (np. zastosowanie szerszej bazy typów artefaktów analitycznych, czy wykorzystanie innego, bardziej złożonego, nieliniowego modelu estymacji).
Źródło:
Theoretical and Applied Informatics; 2013, 25, 1; 3-15
1896-5334
Pojawia się w:
Theoretical and Applied Informatics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The choice of optimal 3-rd order polynomial packet dropping function for NLRED in the presence of self-similar traffic
Autorzy:
Domańska, J.
Augustyn, D.
Domański, A.
Powiązania:
https://bibliotekanauki.pl/articles/201691.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
self-similarity
active queue management
non-linear RED
dropping packets
Opis:
Algorithms of queue management in IP routers determine which packet should be deleted when necessary. The article investigates the influence of the self-similarity on the optimal packet rejection probability function in a special case of NLRED queues. This paper describes another approach to the non-linear packet dropping function. We propose to use the solutions based on the polynomials with degree equals to 3. The process of obtaining the optimal dropping packets function has been presented. Our researches were carried out using the Discrete Event Simulator OMNET++. The AQM model was early verified using the discrete-time Markov chain. The obtained results show that the traffic characteristic has the great impact on the network node behavior, but self-similarity of network traffic has no influence on the choosing of the optimal dropping packet function.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2012, 60, 4; 779-786
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A RED modified weighted moving average for soft real-time application
Autorzy:
Domańska, J.
Domański, A.
Augustyn, D. R.
Klamka, J.
Powiązania:
https://bibliotekanauki.pl/articles/330599.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
active queue management
soft real time
dropping packets
aktywne zarządzanie kolejkami
czas rzeczywisty miękki
Opis:
The popularity of TCP/IP has resulted in an increase in usage of best-effort networks for real-time communication. Much effort has been spent to ensure quality of service for soft real-time traffic over IP networks. The Internet Engineering Task Force has proposed some architecture components, such as Active Queue Management (AQM). The paper investigates the influence of the weighted moving average on packet waiting time reduction for an AQM mechanism: the RED algorithm. The proposed method for computing the average queue length is based on a difference equation (a recursive equation). Depending on a particular optimality criterion, proper parameters of the modified weighted moving average function can be chosen. This change will allow reducing the number of violations of timing constraints and better use of this mechanism for soft real-time transmissions. The optimization problem is solved through simulations performed in OMNeT++ and later verified experimentally on a Linux implementation.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2014, 24, 3; 697-707
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods of introducing alloying elements into liquid magnesium
Wprowadzanie dodatków stopowych do ciekłego magnezu
Autorzy:
Kapinos, D.
Augustyn, B.
Szymanek, M.
Powiązania:
https://bibliotekanauki.pl/articles/263852.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
magnesium
magnesium alloys
alloying elements
magnesium castings
magnez
stopy magnezu
dodatki stopowe
odlewanie magnezu
Opis:
In recent years, magnesium alloys have gained widespread popularity as construction materials. This is due to their Iow density, high strength properties, and advances in their production technology. Properties of magnesium alloys depend prima rily on the type, quantity, and quality of elements present in their composition. It is therefore necessary to carry out research on the further optimisation of the production technology of these alloys. This article presents the results of studies carried out in order to determine the type, form, and parameters of the process of introducing selected alloying elements to magnesium in a manner which enables the manufactureof alloys with predetermined chemical composition. As part of the work, elements such as Al, Zn, Mn, Zr, Si, Cu, Ca, as well as rare earth elements (RE) were introduced into the liquid magnesium. The alloying elements were introduced into the melt at different temperatures in either a metallic form or as master alloys. While conducting studies, respective solubility graphs were plotted for the alloying elements showing the time taken for each element to dissolve to the required form at a specific temperature and concentration. The studies resulted in the development of several techniques of introducing selected alloying elements, which enabled the manufacture of various types of alloys.
W ostatnich latach stopy magnezu cieszą się coraz większym zainteresowaniem jako materiały konstrukcyjne. Związane jest to z ich niską gęstością, dobrymi własnościami wytrzymałościowymi oraz postępem w technologii ich wytwarzania. Własności stopów magnezu zależą głównie od rodzaju, ilości i jakości pierwiastków wchodzących w ich skład. Konieczne zatem jest prowadzenie badań nad optymalizacją technologii otrzymywania stopów na osnowie magnezu.W artykule przedstawiono wyniki badań mających na celu określenie sposobu, postaci i parametrów wprowadzania wybranych dodatków stopowych do magnezu tak, aby możliwe było otrzymanie stopów o założonym składzie chemicznym. W ramach pracy do ciekłego magnezu wprowadzano pierwiastki stopowe, takie jak: Al, Zn, Mn, Zr, Si, Cu, Ca oraz pierwiastki ziem rzadkich (RE). Składniki stopowe wprowadzano do ciekłego magnezu w postaci metalicznej oraz zapraw w różnych temperaturach. Podczas realizacji badań wyznaczono wykresy rozpuszczalności dodatków stopowych przedstawiające czas potrzebny na rozpuszczenie pierwiastka w danej postaci, przy określonej temperaturze i koncentracji. Przeprowadzone badania umożliwiły opracowanie technologii wprowadzania wybranych dodatków stopowych, dzięki czemu możliwe jest wytwarzanie różnych gatunków stopów.
Źródło:
Metallurgy and Foundry Engineering; 2014, 40, 3; 141-160
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opłacalność ekonomiczna zmiany wielkości powierzchni kolektorów słonecznych płaskich w instalacji c.w.u. budynku jednorodzinnego – studium przypadku
The economic profitability of the changing size of solar collectors surface in the case study of the household domestic hot water installation
Autorzy:
Olczak, P.
Kryzia, D.
Augustyn, A.
Olek, M.
Powiązania:
https://bibliotekanauki.pl/articles/394291.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
ciepła woda użytkowa (c.w.u.)
kolektory słoneczne
promieniowanie słoneczne
opłacalność ekonomiczna
NPV
Monte Carlo
domestic hot water (DHW)
solar collectors
solar radiation
economic profitability
Opis:
Kolektory słoneczne są głównymi elementami solarnych systemów grzewczych. Praca tych urządzeń polega na konwersji energii promieniowania słonecznego na ciepło czynnika roboczego. Czynnikiem tym może być zarówno ciecz (glikol lub woda), jak i gaz (powietrze). Ze względu na konstrukcję wyróżnia się kolektory płaskie, próżniowe, próżniowo-rurowe i skupiające. Kolektory płaskie są stosowane przede wszystkim w budynkach, w których potrzeby cieplne są niskie lub średnie, czyli na przykład w gospodarstwach domowych. Rozwój kolektorów został ukierunkowany na zwiększenia wydajności oraz poprawy efektywności ekonomicznej inwestycji. W artykule oceniono wpływ zmiany powierzchni płaskich kolektorów słonecznych na opłacalność ekonomiczną inwestycji. Do analizy wytypowano dom jednorodzinny, zlokalizowany w województwie małopolskim, w którym instalacja przygotowania ciepłej wody użytkowej została rozbudowana o system solarny. System ten składa się z płaskich kolektorów, o łącznej powierzchni absorberów 5,61 m2. Jako czynnik roboczy w instalacji stosowany jest glikol. W celu poprawy efektu ekonomicznego zaproponowano zwiększenie powierzchni absorberów. Na podstawie trzyletnich pomiarów nasłonecznienia oraz efektów cieplnych instalacji, stworzono model ekonomiczny służący do oceny opłacalności zwiększenia powierzchni kolektorów słonecznych. Obliczenia z użyciem modelu promieniowania HDKR wykonano w środowisku Matlab dla lokalizacji Tarnów (najbliższej instalacji). Ponadto na podstawie rzeczywistych pomiarów z tej instalacji, odzwierciedlających wpływ wielu niemierzalnych czynników na efektywność przetwarzania energii słonecznej, wykonano symulacje efektu ekonomicznego dla różnych wielkości zapotrzebowania na ciepło. Otrzymane wyniki uogólniono, co daje możliwość ich wykorzystania w procesie doboru wielkości powierzchni kolektorów w przypadku podobnych instalacji.
Solar collectors are the main components of the solar heating systems. This devices convert radiation from the sun into the heat of distribution medium. The medium can be either (water, glycol) or gas (air). Two types of solar panels can be distinguished on the basis of the construction criterion: flat plate collectors and evacuated tube collectors. Solar collectors development progresses towards improving their efficiency and economic profitability. Flat plate collectors are popular for low and medium heating applications, i.e. in households. In this paper, flat plate collectors with glycol as a distribution medium are investigated. The authors evaluate the impact of changing the size of the solar collectors on the heating economic profitability. A detached house, located in the Malopolskie Province was selected for the analysis. The house was fitted with domestic hot water installation which was extended with the solar system. At present, the collector area amounts to 5.61 m2. In order to improve the economic effect, the authors propose to increase their area. The radiation from the sun, sun exposure and thermal results were collected and calculated for three years. The authors prepared an economic model on the basis of the collected data. This model was created to assess the economic effect in relation to increasing the collector area. Calculations were made with the HDKR radiation model using Matlab software. The authors chose Tarnow as location because the city is the nearest to the tested installation. In addition, the authors created a simulation that allowed the economic effect for different detached houses with different heat demands to be assessed. By using real data an impact of many non-measurable factors on the efficiency of solar energy conversion could be taken into account in the simulation. The obtained results have been generalized and thus can be applied in a similar installation during the process of choosing an appropriate collector area size.
Źródło:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN; 2018, 102; 77-90
2080-0819
Pojawia się w:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Production of Material with Ultrafine Grain Structure in Al-Zn Alloy in the Process of Rapid Solidification
Autorzy:
Szymanek, M.
Augustyn, B.
Kapinos, D.
Boczkal, S.
Nowak, J.
Powiązania:
https://bibliotekanauki.pl/articles/381375.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
aluminium alloys
solidification process
Rapid Solidification
innowacyjne technologie odlewnicze
innowacyjne materiały w odlewnictwie
stopy aluminium
krzepnięcie
szybkie krzepnięcie
Opis:
In the aluminium alloy family, Al-Zn materials with non-standard chemical composition containing Mg and Cu are a new group of alloys, mainly owing to their high strength properties. Proper choice of alloying elements, and of the method of molten metal treatment and casting enable further shaping of the properties. One of the modern methods to produce materials with submicron structure is a method of Rapid Solidification. The ribbon cast in a melt spinning device is an intermediate product for further plastic working. Using the technique of Rapid Solidification it is not possible to directly produce a solid structural material of the required shape and length. Therefore, the ribbon of an ultrafine grain or nanometric structure must be subjected to the operations of fragmentation, compaction, consolidation and hot extrusion. In this article the authors focussed their attention on the technological aspect of the above mentioned process and described successive stages of the fabrication of an AlZn9Mg2.5Cu1.8 alloy of ultrafinegra in structure designated for further plastic working, which enables making extruded rods or elements shaped by the die forging technology. Studies described in the article were performed under variable parameters determined experimentally in the course of the alloy manufacturing process, including casting by RS and subsequnt fragmentation.
Źródło:
Archives of Foundry Engineering; 2014, 14, 2; 57-62
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of Structure and Properties in Casting Processes on the Example of AZ91 Magnesium Alloy
Autorzy:
Augustyn, B.
Szymanek, M.
Kapinos, D.
Boczkal, S.
Korczak, P.
Powiązania:
https://bibliotekanauki.pl/articles/383152.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
magnesium alloy
AZ91 alloy
RS process
mechanical properties
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
stop magnezu
stop AZ91
właściwości mechaniczne
Opis:
Contemporary materials engineering requires the use of materials characterised by high mechanical properties, as these precisely properties determine the choice of material for parts of machinery and equipment. Owing to these properties it is possible to reduce the weight and, consequently, the consumption of both material and energy. Trying to meet these expectations, the designers are increasingly looking for solutions in the application of magnesium alloys as materials offering a very beneficial strength-to-weight ratio. However, besides alloying elements, the properties are to a great extent shaped by the solidification conditions and related structure. The process of structure formation depends on the choice of casting method forced by the specific properties of casting or by the specific intended use of final product. The article presents a comparison of AZ91 magnesium alloys processed by different casting technologies. A short characteristic was offered for materials processed by the traditional semi-continuous casting process, which uses the solidification rates comprised in a range of 5 - 20⁰C/s, and for materials made in the process of Rapid Solidification, where the solidification rate can reach 106⁰C/s. As a result of the casting process, a feedstock in the form of billets and thin strips was obtained and was subjected next to the process of plastic forming. The article presents the results of structural analysis of the final product. The mechanical properties of the ø7 mm extruded rods were also evaluated and compared.
Źródło:
Archives of Foundry Engineering; 2014, 14, 2; 43-48
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Producing Ultrafine Grain Structure in AZ91 Magnesium Alloy Cast by Rapid Solidification
Wytwarzanie materiału o ultradrobnoziarnistej strukturze ze stopu magnezu AZ91 odlewanego w procesie rapid solidification
Autorzy:
Szymanek, M.
Augustyn, B.
Kapinos, D.
Boczkal, S.
Nowak, J.
Powiązania:
https://bibliotekanauki.pl/articles/353516.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium alloy
rapid solidification
plastic consolidation
hot extrusion
extrusion die profile
stopy magnezu
szybkie krzepnięcie
konsolidacja plastyczna
wytłaczanie na gorąco
Opis:
The paper presents the technological aspect of the process of casting, crushing and plastic consolidation of semi-finished products from magnesium alloy. The aim of this study was to produce by the rapid solidification process a magnesium alloy from the MgAl9Zn1 family in the form of ribbons with ultrafine grain structure. The material cast in the melt spinning device was next crushed and subjected to the operation of cold consolidation and hot extrusion. The paper presents different stages of the process, including initial characterisation of the obtained material.
W artykule przedstawiono aspekt technologiczny procesu odlewania, rozdrabniania i konsolidacji plastycznej otrzymywa- nych półwyrobów ze stopu magnezu. Celem pracy było wytworzenie metodą szybkiej krystalizacji stopu magnezu z układu MgAlOZn1, o ultradrobnoziarnistej strukturze w postaci taśmy. Materiał odlany na stanowisku melt spinning w kolejnym etapie został rozdrobniony i poddany procesowi konsolidacji na zimno i wyciskaniu na gorąco. W artykule zostały przedstawione poszczególne etapy procesu wraz z wstępną charakteryzacją otrzymywanego materiału.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 1; 317-321
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Al-Si-Re Alloys Cast by the Rapid Solidification Process
Stopy Al-Si-Re odlewane metodą rapid solidification
Autorzy:
Szymanek, M.
Augustyn, B.
Kapinos, D.
Żelechowski, J.
Bigaj, M.
Powiązania:
https://bibliotekanauki.pl/articles/356571.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium alloy
rapid solidification
grain refinement
ultrafine structure
stop aluminium
szybka krystalizacja
rozdrobnienie ziarna
rozdrobnienie struktury
Opis:
The aim of the studies described in this article was to present the effect of rare earth elements on aluminium alloys produced by an unconventional casting technique. The article gives characteristics of the thin strip of Al-Si-RE alloy produced by Rapid Solidification (RS). The effect of rare earth elements on structure refinement, i.e. on the size of near-eutectic crystallites in an aluminium–silicon alloy, was discussed. To determine the size of crystallites, the Scherrer X-ray diffraction method was used. The results presented capture relationships showing the effect of variable casting parameters and chemical composition on microstructure of the examined alloys. Rapid Solidification applied to Al-Si alloys with the addition of mischmetal (Ce, La, Ne, Pr) refines their structure.
Celem badań opisanych w artykule było przedstawienie wpływu pierwiastków metali ziem rzadkich na stopy aluminium otrzymywane niekonwencjonalną metodą odlewniczą. W artykule scharakteryzowano cienką taśmę ze stopu Al-Si-RE wytworzoną metodą szybkiej krystalizacji (Rapid Solidification). Przedstawiono wpływ pierwiastków metali ziem rzadkich na rozdrobnienie struktury - wielkość krystalitów okołoeutektycznego stopu aluminium - krzem. Do oznaczenia wielkości krystalitów wykorzystano rentgenowską dyfrakcyjną metodę Scherrera. Zaprezentowane wyniki ujmują zależności zmiennych parametrów odlewania i składu chemicznego na mikrostrukturę badanych stopów. Zastosowanie szybkiej krystalizacji dla stopów Al-Si z dodatkiem miszmetalu (Ce, La, Ne, Pr) powoduje rozdrobnienie ich struktury.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 4; 3057-3062
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Casting small-diameter ingots from multicomponent silumins
Odlewanie wlewków o małych średnicach z siluminów wieloskładnikowych
Autorzy:
Zamkotowicz, Z.
Augustyn, B.
Kumor, P.
Kapinos, D.
Żelechowski, J.
Bigaj, M.
Powiązania:
https://bibliotekanauki.pl/articles/264137.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
silumins
structure
VDC ingot casting
siluminy
struktura
odlewanie wlewków VDC
Opis:
The casting of ingots from aluminum alloys with a smali range of solidification temperatures currently poses no major technical problems. On the other hand, problems do occur when multicomponent alloys containing elements such as Cu, Zn, or Mg are cast. This applies to alloys both wrought and cast. For these alloys, the differences in temperature starting and ending the solidification process reach 160°C.The difficulties are even morę pronounced when the diameter of the cast ingot is less than 100 mm. Casting small-diameter ingots requires a very careful selection of parameters, which - for ingots with a diameter of about 70 mm - usually involve very high casting rates of up to 400 mm/min. The formation of a subsurface zone in the ingot along the crystallizer working length of several centimeters is very difficult at such a high casting rate and requires the precise determination of parameters for each alloy, particularly if this is a multicomponent alloy with a wide range of solidification temperatures. To this family of alloys belong multicomponent silumins, with the special case of phosphorus-modified near-eutectic and hypereutectic systems. Below are the results of technologicaI tests as well as structure examinations of ingots cast from silumins with different ranges of solidification temperatures. Ingots of 100-mm diameters were cast in a vertical system. In this arrangement, ingots with a diameter of 70 mm were also cast, using crystallizers normally operating in a horizontal continuous casting line.
Odlewanie we wlewki stopów aluminium o małym zakresie temperatur krzepnięcia nie stwarza obecnie większych problemów technicznych. Trudności występują w przypadku odlewania stopów wieloskładnikowych zawierających takie pierwiastki jak Cu, Zn, Mg. Dotyczyło zarówno stopów do przeróbki plastycznej, jak i odlewniczych. Dla tych stopów różnice pomiędzy temperaturą początku i końca krzepnięcia dochodzą do 160°C. Dodatkowo trudności zwiększają się w przypadku odlewania wlewków o średnicach poniżej 100 mm. Proces odlewania wlewków o małej średnicy wymaga bardzo starannego doboru parametrów, co wiąże się z bardzo dużymi szybkościami odlewania dochodzącymi do 400 mm/min dla wlewków o średnicy około 70 mm. Utworzenie strefy przypowierzchniowej wlewka na kilkucentymetrowej długości roboczej krystalizatora, przy tak wysokich szybkościach odlewania, jest bardzo utrudnione i wymaga precyzyjnego ustalenia parametrów dla każdego stopu, a zwłaszcza dla stopów wieloskładnikowych o szerokim zakresie temperatur krzepnięcia. Do takich stopów zaliczane są siluminy wieloskładnikowe, wśród których szczególnym przypadkiem są siluminy około- i nadeutektyczne modyfikowane fosforem. W artykule zaprezentowano wyniki prób technologicznych oraz wyniki badań struktury wlewków odlanych z siluminów, różniących się zakresem temperatur krzepnięcia. Wlewki o średnicy 100 mm odlewane były na linii do odlewu pionowego. W tym układzie odlewano także wlewki o średnicy 70 mm, z wykorzystaniem krystalizatorów przewidzianych do linii odlewu ciągłego poziomego.
Źródło:
Metallurgy and Foundry Engineering; 2014, 40, 3; 175-190
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The microstructure of annealed GALFAN coating on steel substrate
Mikrostruktura wygrzewanych pokryć cynkowych typu GALFAN na podłożu stalowym
Autorzy:
Żelechower, M.
Kliś, J.
Augustyn, E.
Grzonka, J.
Stróż, D.
Rzychoń, T.
Woźnica, H.
Powiązania:
https://bibliotekanauki.pl/articles/355009.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mikrostruktury
pokrycia cynkowe
zinc coating
Galfan
heat treatment
interface
ternary Fe-Al-Zn compounds
Opis:
The commercially available Galfan coating containing 5-7wt.% of Al deposited on the low carbon steel substrate by hot dipping has been examined with respect to the microstructure of the coating/substrate interface area. The application of several experimental techniques (SEM/EDS, XRD, TEM/AEM/EDS/ED) allowed demonstrating the two-phase structure of the alloy coating in non-treated, commercially available Galfan samples: Zn-rich pre-eutectoid η phase grains are surrounded by lamellar eutectics of β -Al and η-Zn. The transition layer between the alloy coating and steel substrate with the considerably higher Al content (SEM/EDS, TEM/EDS) has been found in both non-treated and annealed samples (600 degree Celsjus /5 minutes). Only the monoclinic FeAl3Znx phase however was revealed in the annealed sample (TEM/electron diffraction) remaining uncertain the presence of the orthorhombic Fe2Al5Znx phase, reported by several authors.
Przeprowadzono badania mikrostruktury pokryć cynkowych typu Galfan na podłożu stalowym w obszarze przejścia warstwa - podłoże. Materiałem do badań były dostępne na rynku próbki pokrywanych blach otrzymanych metodą zanurzeniowa w kąpieli zawierającej 5-7% wagowych Al. Zastosowanie szeregu metod analitycznych (SEM/EDS, XRD, TEM/AEM/EDS/ED) pozwoliło na ujawnienie dwufazowej struktury w próbkach przed obróbką cieplną: bogata w cynk faza eta (η) jest otoczona mieszaniną eutektyczną składająca się z płytek beta (β) aluminium oraz fazy eta (η) cynku. Warstwa przejściowa pomiędzy pokryciem cynkowym i podłożem stalowym charakteryzującą się wyższą zawartością aluminium została znaleziona (SEM/EDS, TEM/EDS) zarówno w próbkach przed obróbka cieplna, jak i w próbkach przeżarzanych (600 stopni Celsjusza/5 minut). Jednak wbrew doniesieniom kilku autorów nie potwierdzono obecności rombowej fazy Fe2Al.5Znx , a stwierdzono obecność jedynie jednoskośnej fazy FeAl3Znx (TEM/SAED) i to tylko w próbkach przeżarzonych.
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 2; 517-523
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Rare Earth Addition on Microstructure and Mechanical Properties of the Rapidly Solidified Al-Si and Al-Si-Ni Alloys
Autorzy:
Kapinos, D.
Szymanek, M.
Augustyn, B.
Boczkal, S.
Szymański, W.
Tokarski, T.
Lelito, J.
Powiązania:
https://bibliotekanauki.pl/articles/353569.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium alloy
rapid solidification
grain refinement
ultrafine structure
Opis:
The article presents research aimed at determining the effect of adding rare earth elements to near-eutectic Al-Si and Al-Si-Ni alloys on the microstructure and mechanical properties of the obtained products. Material for the research was prepared using a melt spinner - a device used for rapid crystallization, casting thin ribbons, which were then subjected in subsequent stages to fragmentation, consolidation and plastic working. The ribbons and extruded rods cast were described in terms of their structure and their strength properties were determined at different measurement temperatures. It was shown that the lightweight materials produced from aluminium alloys using the rapid solidification process have an ultra-fine structure and good strength properties. Analysis under a microscope confirmed that the addition of rare earth alloys Al-Si and Al-Si-Ni causes fragmentation of the microstructure in the tapes produced. The presence of rare earth elements in the alloys tested has an impact on the type and the morphology of the particles of the microstructure’s individual components. In addition to the change in particle morphology, the phenomenon of the separation of numerous nanometric particles of intermetallic phases containing rare earth elements was also observed. The change in microstructure caused by the addition of rare earth elements in the form of a mischmetal increases the mechanical properties.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 185-192
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie mąki owsianej - produktu ubocznego przy produkcji koncentratu z owsa - w piekarstwie
Use of oat flour – by-product derived from manufacturing oat concentrate – in baking industry
Autorzy:
Gibinski, M.
Gambus, H.
Nowakowski, K.
Mickowska, B.
Pastuszka, D.
Augustyn, G.
Sabat, R.
Powiązania:
https://bibliotekanauki.pl/articles/826059.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Technologów Żywności
Tematy:
koncentraty spozywcze
maka owsiana
pieczywo pszenne
pieczywo pszenno-zytnie
piekarstwo
produkty uboczne
wartosc odzywcza
wykorzystanie
wypiek pieczywa
Opis:
Wysoka wartość odżywcza mąki owsianej, stanowiącej produkt uboczny podczas uzyskiwania koncentratu β-D-glukanu BETAVEN, zasugerowała możliwość jej wykorzystania do wypieku pieczywa pszennego i pszenno-żytniego. Celem badań było opracowanie receptury chlebów pszennych i mieszanych, w których część mąki pszennej zastąpiono odpadową mąką owsianą w ilości 10, 20, 25 % masy mąki pszennej, a także określenie wpływu zastosowanej mąki owsianej na cechy sensoryczne i żywieniowe uzyskanych produktów. Przedstawione wyniki wskazują, że odpadowa mąka owsiana jest dobrym źródłem białka o korzystnym składzie aminokwasowym, włókna pokarmowego oraz tłuszczu surowego i nadaje się w ilości do 20 % masy mąki pszennej do suplementowania jasnego pieczywa pszennego i pszenno-żytniego.
A high nutritional value of oat flour constituting a by-product derived from manufacturing a BETAVEN β-D-glucan concentrate suggested that the oat flour could be used as an addition in wheat and wheat-rye breads. The objective of the research project was to develop a recipe of wheat and mixed breads, where a portion of wheat flour was substituted with the leftover oat flour amounting to 10 %, 20 %, and 25 % of the wheat flour content. Another objective was to determine the impact of the oat flour used on the sensory and nutritional properties of the products manufactured. The results obtained show that the leftover oat flour is a good source of protein with a beneficial amino-acids composition, dietary fibre, and crude lipids, and its amount not exceeding 20% of wheat flour is fit for use as a supplement in wheat and wheat-rye white breads.
Źródło:
Żywność Nauka Technologia Jakość; 2010, 17, 3
1425-6959
Pojawia się w:
Żywność Nauka Technologia Jakość
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-15 z 15

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies