Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "parameter model" wg kryterium: Wszystkie pola


Tytuł:
Real-Time Market Abuse Detection with a Stochastic Parameter Model
Autorzy:
Cholewiński, Radosław
Powiązania:
https://bibliotekanauki.pl/articles/483319.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Market abuse detection
insider trading
real-time analysis
timevarying parameters
uni- and bivariate GARCH processes
Opis:
This paper develops a new model of market abuse detection in real time. Market abuse is detected, as Minenna (2003) proposed, on the basis of prediction intervals. The model structure is based on the discrete-time, extended market model introduced by Monteiro, Zaman, Leitterstorf (2007) to analyze the market cleanliness. Parameters of the expected return equation are assumed, however, to be time-varying and estimated under the state-space framework using the extended Kalman filter postulated by Chou, Engle, Kane (1992) to capture the GARCH effect in returns. QML estimation is performed on intraday data; its utilization is proposed as an alternative to the continuous time modeling by Minenna (2003). This framework is generalized to the bivariate case which enables the analysis of daily open/close data. The paper also extends procedures of the statistical verification of the estimated state-space model to include the uncertainty arising from time-invariant parameters.
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2009, 1, 3; 261-284
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modal analysis of back-to-back planetary gear: experiments and correlation against lumped-parameter model
Autorzy:
Hammami, A.
Rincon, A. F. del
Rueda, F. V.
Chaari, F.
Haddar, M.
Powiązania:
https://bibliotekanauki.pl/articles/280785.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
back-to-back planetary gears
modal analysis
lumped-parameter
impact test
Opis:
In order to characterize the dynamic behaviour of a back-to-back planetary gear, experimental and numerical modal analysis techniques are achieved. Rotational and translational modal deflections are highlighted. Natural frequencies are compared to the results from the lumped-parameter model. The modes are presented in the numerical studies in low-frequency and high-frequency bands. Distributions of modal kinetic and strain energies are studied.
Źródło:
Journal of Theoretical and Applied Mechanics; 2015, 53, 1; 125-138
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Temperature on the Refractive Indices of Liquid Crystals and Validation of a Modified Four-Parameter Model
Autorzy:
Thingujam, K.
Sarkar, S.
Choudhury, B.
Bhattacharjee, A.
Powiązania:
https://bibliotekanauki.pl/articles/1418322.pdf
Data publikacji:
2012-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.15.+e
78.20.Fm
64.70.M-
Opis:
The variation of refractive indices with temperature of three pure nematogenic compounds 5OCB, CPHB and 6CHBT were studied experimentally using thin prism technique. The refractive indices $n_{o}$ and $n_{e}$ were measured using 633 nm lines from a He-Ne laser. A modified four-parameter model was taken which is based on the Vuks equation describing the effect of temperature on the refractive indices of liquid crystals. In this paper we report the variation of refractive indices of these three liquid crystals with temperature, using the thin prism method. The variation in birefringence was determined experimentally. The variation in refractive indices and birefringence were also fitted theoretically using the modified Vuks equation. On comparison, the theoretically fitted values show close agreement with the experimental values.
Źródło:
Acta Physica Polonica A; 2012, 122, 4; 754-757
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trójparametrowy model zdatności systemu z dwoma typami zagrożeń
Three parameter model of the system lifetime with two types of risks
Autorzy:
Andrzejczak, K.
Popowska, B.
Powiązania:
https://bibliotekanauki.pl/articles/257893.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
funkcja przetrwania
funkcja ryzyka
zagrożenie konkurujące
rozkład Weibulla
zagrożenie incydentalne
zagrożenie starzeniowe
survival function
risk function
competing risks
Weibull distribution
accidental risk
ageing risk
Opis:
W pracy przedstawiono trójparametrowy model czasu zdatności systemu technicznego narażonego na dwa typy zagrożeń. Do pierwszego typu zagrożeń należą wszelkie zagrożenia incydentalne, a do drugiego tak zwane zagrożenia starzeniowe. Motywacją do napisania tej pracy była właśnie idea połączenia badań tych dwóch typów zagrożeń, z jakimi mamy często do czynienia w praktyce, zwłaszcza w kontekście systemów technicznych. Celem pracy jest wskazanie alternatywy dla masowo stosowanego rozkładu Weibulla w badaniu czasów zdatności systemów. W punkcie 1 opisano trójparametrowy model, zdefiniowany jako minimum dwóch zmiennych losowych. Uzasadniono zarówno potrzebę wprowadzenia tego modelu, jak i jego przewagę nad dotychczasowym sposobem modelowania czasu zdatności systemu. W punkcie 2 przedstawiono podstawowe charakterystyki funkcyjne i liczbowe wprowadzonego modelu zdatności systemu. Ponadto obliczono wpływ parametrów, dla różnych kombinacji ich wartości, na ustalenie przyczyny utraty zdatności systemu.
In constructing a lifetime model of any technical system, sometimes the traditionally used Weibull distribution is biased. In consequence, parameter estimation can be fatal. In this situation, it is not possible to find a good fitting function that characterises the system lifetime. Here all possible risks of the system are divided into two types: accidental and ageing risks. The accidental risk has an exponential distribution, and the ageing risk has a Weibull distribution. In this paper, a three parameters model of the system lifetime with both types of risks is presented. Modelling was performed by a simple competing risk distribution as a possible alternative to the Weibull distribution in lifetime analysis. This distribution corresponds to the minimum between the family of exponential and family of Weibull distributions. Our motivation was to take account of both accidental and ageing risks in lifetime data analysis. For this purpose, we introduced a three-parameter model, where such functions as hazard function, survival function, and density function are presented. Then, such characteristics as the expected value and variance of the modelled system lifetime are considered. Finally, the problem of choosing between an exponential, Weibull, or the introduced competing risk model is discussed.
Źródło:
Problemy Eksploatacji; 2011, 1; 17-24
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustic cylindrical cloak
Autorzy:
Premarathna, S. M.
Wijewardena Gamalath, K. A. I. L.
Powiązania:
https://bibliotekanauki.pl/articles/1192658.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Acoustic metamaterials
electromagnetic metamaterials
negative index
anisotropic’ cloaking
radially dependent FDTD method
reduced parameter model’ higher order parameter model
Opis:
Using the analogy between anisotropic acoustic metamaterials with magnetic metamaterials in transverse magnetic mode, an electromagnetic wave of 2 GHz n transverse magnetic mode, at normal incidence propagating through a two dimensional, anisotropic, semi infinite, double negative, metamaterial slab of 800 × 800 cells, embedded in free space, for the ideal loss case was simulated by a radially dependent finite difference time dependent method to study an ideal acoustic cylindrical cloak. For the simulations multiple cycle m-n-m pulses generating Gaussian beams were used as sinusoidal hard line sources. The simulations for acoustic cylindrical cloaking by a reduced parameter model and a higher order parameter model are also presented. The cloaking behaviour is largely dependent upon the transformation and not on the thickness of the cloak. The radial dependent model and the higher order transformation model are suited for acoustic cloaking.
Źródło:
World Scientific News; 2016, 47, 2; 75-88
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Procedura kalibracji wieloparametrycznego modelu migracji znaczników przez próbkę gruntu
The calibration procedure of the multi-parameter model of tracers migration through ground sample
Autorzy:
Okońska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2062799.pdf
Data publikacji:
2009
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
kolumna filtracyjna
model numeryczny
kalibracja
parametry hydrogeologiczne
filtration column
numerical model
calibration
hydrogeological parameters
Opis:
W celu identyfikacji parametrów migracji znaczników w ośrodku porowatym przeprowadzono badania laboratoryjne i modelowe. Badania laboratoryjne polegały na zarejestrowaniu krzywych przejścia wybranych znaczników przez próbkę piasku w kolumnie filtracyjnej. Natomiast badania modelowe obejmowały skonstruowanie za pomocą oprogramowania Visual MODFLOW Pro v.3.1 oraz MT3D99 numerycznego modelu kolumny filtracyjnej i odtworzenie w drodze symulacji warunków badań laboratoryjnych. Wyznaczenie wartości parametrów migracji znaczników przeprowadzono na modelu numerycznym poprzez proces kalibracji modelu metodą kolejnych przybliżeń. Artykuł szczegółowo przedstawia metodykę tarowania wieloparametrycznego modelu migracji na wybranym przykładzie. Wypracowana procedura tarowania modelu numerycznego prowadzi do uzyskania zestawu parametrów opisujących takie procesy, jak adwekcja, dyspersja hydrodynamiczna oraz adsorpcja. Kalibrację oceniano poprzez porównanie krzywych przejścia doświadczalnych i obliczeniowych na podstawie sformułowanych własnych kryteriów zgodności tych krzywych. Otrzymane wyniki poddano dodatkowo weryfikacji metodą rozwiązań analitycznych.
In order to identify parameters of tracer migration in porous medium there was conducted laboratory and model research. Laboratory research was based on registering the breakthrough curves of selected tracers through sand sample in filtration column. Model research involved creating through Visual MODFLOW Pro v.3.1 and MT3D99 software, numerical model of filtration column and reflecting laboratory research conditions through numerical simulation. Identification of tracer migration parameters was conducted on numerical model by the method of succeeding iterations. The article presents in detail the calibration procedure of multi-parameter model of migration on the selected example. The procedure of calibration numerical model, which was worked out by the author, leads to achieving the set of parameters describing such processes as advection, hydrodynamic dispersion and adsorption. Calibration was evaluated by comparison of numerical and experimental breakthrough curves on the basis of author's own criteria of compatibility of the curves. The results which were obtained underwent additional verification by the method of analytical solutions.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2009, 436, z. 9/2; 345-352
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical study of a twin-tube magnetorheological damper concept
Autorzy:
Gołdasz, J.
Powiązania:
https://bibliotekanauki.pl/articles/280017.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
MR damper
twin-tube damper concept
lumped parameter model
Opis:
In this study, the author presents a theoretical model of a semi-active magnetorheological (MR) twin-tube damper concept. The model relies on geometric variables and material properties and can be used in engineering and research studies on damper structures. Other non-linear characteristics, namely, the fluid chamber compressibility, fluid inertia, cylinder elasticity, friction, one-way check valves are included into the model as well. The author studies the performance of the damper model as design variables are varied, and the results are analysed and discussed.
Źródło:
Journal of Theoretical and Applied Mechanics; 2015, 53, 4; 885-894
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical and experimental investigation on nonlinear dynamic characteristics of planetary gear train
Autorzy:
Zhang, Jianwu
Guo, Han
Yu, Haisheng
Zhang, Tong
Powiązania:
https://bibliotekanauki.pl/articles/1839620.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
deep hybrid transmission
power split devices
lumped parameter model
dynamic instability
Opis:
A deep hybrid electric vehicle (DHEV) equipped with a Ravigneaux compound planetary gear train (PGT) encounters severe gear whine noises during acceleration in the EV drive mode. For the analysis of vibro-acoustic sources, a 5DOF lumped-parameter vibration model for the PGT dynamic system is established as well as sound pressures radiated from the transmission on a test bench are measured for data processing and recognition. By comparison between numerical and experimental analyses, natural vibration modes of the PGT are examined and high frequency modal resonances in association with the planetary gears are observed only to cause narrow band whine noises. Furthermore, a 2DOF reduced dynamic model for the planetary gears with consideration of nonlinearities such as time-varying mesh stiffness and backlash is proposed, and numerical solutions to bifurcations and dynamic instabilities of the two sets of planetary gears are obtained. It is found that nonlinear vibration behaviour of the long and short planets are major causes of shock and vibration of the hybrid transmission. Severe vibro-acoustic noises excited dominantly by the planetary gears are alleviated after implementing micro-geometry modifications to the PGT.
Źródło:
Journal of Theoretical and Applied Mechanics; 2020, 58, 4; 1009-1022
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New linear model for optimal cluster size in cluster sampling
Autorzy:
Shukla, Alok Kumar
Yadav, Subhash Kumar
Powiązania:
https://bibliotekanauki.pl/articles/1363544.pdf
Data publikacji:
2020-06-05
Wydawca:
Główny Urząd Statystyczny
Tematy:
Non-linear models
optimum cluster size
four-parameter model
variance function
Opis:
In this paper, a nonlinear model is proposed for improving the relationship between the size of a cluster and the variance within the cluster. This model describes the most appropriate functional relation between the within-cluster variance and the cluster size. Through this model, we can obtain the optimum size of a cluster and an estimate of the variance between clusters. The proposed model leads to further improvement in the estimation of the optimum size of a cluster, and the formula for the determination of optimum cluster size leads to explicit solution of models.
Źródło:
Statistics in Transition new series; 2020, 21, 2; 189-200
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The formation of transportation route selection model of the urban population in Matlab software environment
Formirovanie modeli vybora marshruta peredvizhenija gorodskogo naselenija v programmnojj srede Matlab
Autorzy:
Fornalchyk, Y.
Demchuk, I.
Powiązania:
https://bibliotekanauki.pl/articles/793241.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
fuzzy logic
calculation method
implementation
transportation
urban population
passenger
allocation
MATLAB software
parameter model
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2015, 15, 3
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using of dynamic vibration absorbers for regulation of vibrating compactor vibration properties
Wykorzystanie dynamicznych amortyzatorów wibracyjnych w celu regulowania charakterystyk wibracyjnych walców wibracyjnych
Autorzy:
Kernytskyy, I.
Diveyev, B.
Vybranets, J.
Kernytskyy, N.
Powiązania:
https://bibliotekanauki.pl/articles/40205.pdf
Data publikacji:
2008
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
dynamic property
dynamic vibration absorber
machine construction
mathematical model
optimization
parameter model
regulation
vibration property
Źródło:
Acta Scientiarum Polonorum. Architectura; 2008, 07, 3
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of flow-induced vibration phenomena in automotive shock absorbers
Badanie drgań wywołanych przepływem oleju w samochodowym tłumiku hydraulicznym
Autorzy:
Sikora, M.
Powiązania:
https://bibliotekanauki.pl/articles/368832.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
automotive
double-tube shock absorber
vibration
lumped parameter model
przemysł samochodowy
dwururowy tłumik hydrauliczny
drgania
model o parametrach skupionych
Opis:
The purpose of this study was to develop a model of the dynamic behavior of a hydraulic vehicle double-tube shock absorber. The model accounts for the effects of compressibility, valve stiction, inertia, etc. and can be suitable for use in the analysis on flow-induced pressure fluctuations in the device. The author highlights all major variables to influence the output of the shock absorber, and then proceeds by performing a series of simulations using the developed model. The model is demonstrated to operate well in the large amplitude and low frequency range as well as the small amplitude and high frequency excitation operation regimes. The results are presented in the form of time histories of pressures in each fluid volume of the damper, flow rates through the valves, piston rod acceleration and force. Fast Fourier Transform (FFT) graphs are presented, too, in order to identify the major components of the pressure fluctuation phenomena in the frequency domain.
Celem niniejszej pracy jest zbudowanie modelu dwururowego tłumika hydraulicznego odzwierciedlającego dynamiczne zachowanie zaworu. Stworzony model uwzględnia szereg zjawisk takich jak ściśliwość cieczy, bezwładność, siłę potrzebną do rozsunięcia dwóch równoległych płaszczyzn, pomiędzy którymi znajduje się olej (tzw. siła lepienia) i inne. Pozwala to na symulacje zjawisk dynamicznych i badanie drgań wywołanych przepływem oleju. Zostały uwzględnione wszystkie najważniejsze zmienne wpływające na generowanie drgań. Model działa poprawnie zarówno w niskich, jak i wysokich częstotliwościach. Rezultaty przeprowadzonych symulacji zostały przedstawione w postaci przebiegów czasowych ciśnienia, natężenia przepływu przez zawory oraz przyśpieszenia tłoczyska tłumika. Na wykresach częstotliwościowych widoczne są najważniejsze składowe obserwowanych drgań.
Źródło:
Mechanics and Control; 2014, 33, 2; 58-64
2083-6759
2300-7079
Pojawia się w:
Mechanics and Control
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Schemat cieplny silnika indukcyjnego klatkowego małej mocy
Lumped-parameter thermal model of a squirrel cage induction motor
Autorzy:
Mynarek, P.
Kowol, M.
Powiązania:
https://bibliotekanauki.pl/articles/378281.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
silnik indukcyjny klatkowy
silnik elektryczny
model termiczny silnika indukcyjnego
Opis:
W pracy przedstawiono metodę analizy cieplnej silnika indukcyjnego klatkowego. Model termiczny analizowanego silnika został zbudowany na podstawie metody schematów cieplnych i zaimplementowany środowisku MATLAB/SIMULINK przy wykorzystaniu dodatkowego toolboxa PLECS. Za pomocą zbudowanego modelu można w stosunkowo łatwy sposób wyznaczyć przyrosty temperatury w poszczególnych elementach silnika, a zwłaszcza w części połączeń czołowych oraz części żłobkowej uzwojenia. Wielkości te są niezmiernie ważne podczas projektowania jak i eksploatacji maszyn elektrycznych. Otrzymane wyniki z symulacji zostały zweryfikowane pomiarami wykonanymi na modelu fizycznym silnika.
The article describes a method of thermal calculations of squirrel cage induction motor. Thermal model of the analysed motor was built on the basis of on the thermal network method and was implemented in MATLAB/SIMULINK environment by using an optional toolbox PLECS. A thermal model of a motor presented in the paper allows to determine temperatures of particular components of the machine, especially in end winding and slot part of the winding. Hence thermal phenomena which occur in electric motors are an important aspects while designing them and in their exploitation. Simulation results, which had been obtained, were verified by measurements performed on the physical model of the motor. Temperature measurements were made with support of the environment Lab View and controller NI PXIe-8130 with card NI PXI-4353.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2012, 72; 109-114
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method for prediction of cavitation erosion performance in hydro-turbines based on the two-parameter phenomenological model
Autorzy:
Gireń, B. G.
Noińska-Macińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/1191846.pdf
Data publikacji:
2018
Wydawca:
Gdańska Szkoła Wyższa
Tematy:
cavitation erosion
materials performance
performance evaluation
random process modelling
wear
Opis:
Two-parameter phenomenological model for quantification of the cavitation damage process in its initial — incubation stage inspired by Förster energy migration theory is presented in the paper. The model built was supplemented with functional relationships between calculation parameters and strength parameters of the materials derived for chosen cavitation loading conditions. Experiments at the rotating disk set-up have been carried out in order to obtain necessary experimental data. The values of calculation parameters have been determined by adjusting the theoretical erosion curve to experimental one. Preliminary experimental verification of the model soundness consisted in comparing theoretical to experimental results obtained from both the ICET program and the experimental investigations of the cavitation erosion at Banki-Michel turbine blades. Reliability as well as the sources of inaccuracy and uncertainties were also discussed. The far-reaching aim of the work is to create the calculation tool for prediction of cavitation erosion performance in hydro-turbines during their operating cycle.
Źródło:
Eco-Energetics: technologies, environment, law and economy; 2018, 1; 21--32
2657-5922
2657-7674
Pojawia się w:
Eco-Energetics: technologies, environment, law and economy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmodyfikowana metoda potencjałów węzłowych w analizach energetycznych budynków
Modified nodal analysis for building energy simulations
Autorzy:
Narowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/362671.pdf
Data publikacji:
2015
Wydawca:
Instytut Fizyki Budowli Katarzyna i Piotr Klemm
Tematy:
symulacje energetyczne
teoria grafów
model parametrów skupionych
zmodyfikowana metoda potencjałów węzłowych
building energy simulation
graph theory
lumped parameter model
modified node potentials method
Opis:
W artykule przedstawiono metodę wyznaczania ilości ciepła do ogrzewania i chłodzenia budynku, wykorzystującą model budynku w postaci sieci przepływu ciepła z elementami gałęzi o skupionych parametrach pojemności i przewodności cieplnej. Analogia matematyczna sieci przepływu ciepła i sieci elektrycznych pozwala na zastosowanie podobnych metod rozwiązywania tych układów. W artykule opisano metodę potencjałów węzłowych oraz wskazano jej wady, które często uniemożliwiają zastosowanie tej metody do opisu sieci przepływu ciepła w budynku. W dalszej części przedstawiono modyfikację metody potencjałów węzłowych, która usuwa wykazane wady metody klasycznej, pozwalając na opis sieci przepływu ciepła w budynku z wykorzystaniem sieci z węzłami w których zadane są wartości temperatury. Przedstawiona metoda pozwala na automatyczne, komputerowe, formułowanie układu równań opisujących sieć przepływu energii w budynku umożliwiając szybkie modyfikowanie schematów modeli budynku używanych do analiz energetycznych. W przeciwieństwie do równań podanych w normie PN EN ISO 13790, opisana metoda nie wymaga wyprowadzania nowych równań opisujących uproszczony godzinowy model dynamiki cieplnej budynku. Układ równań zmodyfikowanego modelu godzinowego budynku może być automatycznie generowany na podstawie topologii schematu modelu przyjętego do obliczeń. Na końcu artykułu w dodatku przedstawiono przykładowe macierze składowe gałęzi oraz macierz główną i wektor wyrazów wolnych dla modelu 5R1C wyznaczony zmodyfikowaną metodą potencjałów węzłowych.
This paper presents principles of modified nodal analysis used to solve lumped parameters networks which model whole building heat exchange. The lumped capacitance and resistance 5R1C or 6R1C method used for whole building modelling with simple hourly method utilize predefined equations presented in PN EN ISO 13790 standard. Modification of building energy network model causes that the model equations have to be determined again. The problem can be solved with graph theory and classic nodal analysis used for determining node potentials, which are in the case of building energy analysis, nodes temperature. This method whatever is very useful, cannot be used for networks containing branches with ideal potential sources. Modified nodal analysis combines dual graph topology with network admittance branches classified for the first group, and impedance branches classified for second group. Branch elements can be presented as stamp matrices which are used for define main matrix and right hand side vector of network equation system. Modified nodal analysis can be used for automatic formulation of equation set which then can be solved with any efficient numerical method. This approach allows to quickly modify building model and provide energy analysis without deriving new equations for that model as presented in PN EN ISO 13790 standard.
Źródło:
Fizyka Budowli w Teorii i Praktyce; 2015, T. 7, nr 3, 3; 35-48
1734-4891
Pojawia się w:
Fizyka Budowli w Teorii i Praktyce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Robust fuzzy model predictive control of an overhead crane
Autorzy:
Smoczek, J.
Szpytko, J.
Powiązania:
https://bibliotekanauki.pl/articles/242944.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
overhead crane
model predictive control
linear parameter varying model
fuzzy interpolation
Opis:
The method of controlling an overhead crane with respect to the variation of operating conditions and control constraints is developed using a model predictive control (MPC) and fuzzy interpolation applied in linear parameter varying (LPV) approach to crane dynamic modelling. The proposed control approach is based on the assumption that operating conditions vary within the known range of scheduling variables, and the parameters of a crane dynamic model can be interpolated by a quasi-linear fuzzy model designed through utilizing the P1-TS fuzzy theory. Hence, a crane dynamic is approximated through interpolation between a set of local linear models determined through identification experiments at the local operating points selected within the bounded intervals of scheduling variables. For the modelling assumptions, the control algorithm is developed based on a generalized predictive control (GPC) procedure taking into consideration the constraints on sway angle of a payload and control signal. Feasibility and applicability of the proposed control technique were confirmed during experiments carried out on a laboratory-scaled overhead crane. The results of experiments are presented and compared with performances of a fuzzy logic-based scheduling control scheme.
Źródło:
Journal of KONES; 2015, 22, 2; 205-212
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transformation Kinetics of Austempered Ductile Iron: Dilatometric Experiments and Model Parameter Evaluation
Autorzy:
Suchocki, C.
Myszka, D.
Wasiluk, K.
Powiązania:
https://bibliotekanauki.pl/articles/356026.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ADI
transformation kinetics
diffusional transformation
model characteristics
Opis:
In this study a group of selected transformation kinetics equations is applied to describe the isothermal ferritic transformation in austempered ductile iron (ADI). A series of dilatometric tests has been carried out on ADI at different temperatures. The obtained experimental data are utilized to determine the parameter values of the considered kinetic equations. It is found that the transformation kinetics models by Starink, Austin and Rickett are substantially more effective at describing the ferritic transformation in ADI than the much celebrated Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. Furthermore, it is demonstrated that evaluating the kinetic parameters using the least squares method instead of calculating them from vastly used formulas can significantly improve the accuracy of the JMAK model’s predictions.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1661-1666
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ład społeczny w powiatach - analiza przy użyciu modelowania równań strukturalnych SEM
Social order in districts – analysis using structural equation modelling (SEM)
Autorzy:
Pietrzak, Michał Bernard
Żurek, Mirosława
Powiązania:
https://bibliotekanauki.pl/articles/567341.pdf
Data publikacji:
2012
Wydawca:
Olsztyńska Szkoła Wyższa
Tematy:
Modelowanie
Ład społeczny
Modele parametryczne
Poziom życia
Ład środowiskowy i ekonomiczny
modeling
Social order
Parameter model
Standard of living
Environmental and economic order
Opis:
Pojęcie modelowania równań strukturalnych (SEM, Structural Equation Modeling) dotyczy klasy wielowymiarowych statystycznych modeli parametrycznych, w ramach której powiązane są ze sobą modele strukturalne i pomiarowe oparte na konfirmacyjnej analizie czynnikowej. Właściwością modeli równań strukturalnych (SEM) jest możliwość uwzględnienia w modelu zmiennych ukrytych. W artykule podjęta została próba zastosowania metodologii SEM do zbadania zależności pomiędzy ładem społecznym, ekonomicznym i środowiskowym w powiatach a poziomem życia jego mieszkańców. Zarówno ład społeczny, ekonomiczny i środowiskowy, jak i poziom życia mieszkańców zostały ujęte w modelu jako zmienne ukryte (czynniki). Estymacja modelu pozwoliła na pozytywną weryfikację postawionej hipotezy modelowej, zgodnie z którą kształtowany przez powiaty ład ekonomiczny wpływa dodatnio na kształtowany przez nie ład społeczny i środowiskowy. Ponadto udało się ukazać relację dodatnią pomiędzy istniejącym w powiatach ładem w jego ekonomicznym i społecznym aspekcie a poziomem życia jego mieszkańców.
The concept of structural equation modelling (SEM) refers to class of multidimensional statistical model, which contains associated together structural models and measurement models - based on confirmatory factor analysis. Among the strengths of SEM is the ability to construct latent variables. In article the try using SEM methodology to test dependences between social, economic and environment order as well as quality of life was undertaken. Quality of life as well as social, economic and environment order were formulated in model as latent variables (factors). The results of model estimation allows to positive verification hypothesis that economic order has plus effect on social and environment order in districts. Furthermore the positive relation between economic also as social order and quality of life was shown.
Źródło:
Warmińsko-Mazurski Kwartalnik Naukowy, Nauki Społeczne; 2012, 4; 189-200
2084-1140
Pojawia się w:
Warmińsko-Mazurski Kwartalnik Naukowy, Nauki Społeczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Robust predictive control of an overhead crane
Autorzy:
Smoczek, J.
Szpytko, J.
Powiązania:
https://bibliotekanauki.pl/articles/243833.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
overhead crane
predictive control
linear parameter varying model
recursive estimation
fuzzy interpolation
Opis:
The predictive control scheme is developed for an overhead crane using the generalized predictive procedure applied for the discrete time linear parameter-varying model of a crane dynamic. The robust control technique is developed with respect to the constraints of sway angle of a payload and control input signal. The two predictive strategies are presented and compared experimentally. In the first predictive control scheme, the online estimation of the parameters of a crane dynamic model is performed using the recursive least square algorithm. The second approach is a sensorless anti-sway control strategy. The sway angle feedback signal is estimated by a linear parameter-varying model of an unactuated pendulum system with the parameters interpolated using a quasi-linear fuzzy model designed through utilizing the P1-TS fuzzy theory. The fuzzy interpolator is applied to approximate the parameters of a crane discrete-time dynamic model within the range of scheduling variables changes: the rope length and mass of a payload. The experiments carried out on a laboratory scaled overhead crane confirmed effectiveness and feasibility of the proposed solutions. The implementation of control systems was performed using the PAC system with RX3i controller. The series of experiments carried out for different operating points proved robustness of the control approaches presented in the article.
Źródło:
Journal of KONES; 2017, 24, 2; 231-238
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new hybrid (hydro-numerical) model of the circulatory system
Autorzy:
Darowski, M.
Kozarski, M.
Ferrari, G.
Zieliński, K.
Górczyńska, K.
Szczepanowski, A.
Pałko, K. J.
Fresiello, L.
Di Molfetta, A.
Powiązania:
https://bibliotekanauki.pl/articles/199804.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lumped parameter circulatory model
hybrid hydro-numerical models
impedance transformers
LVAD assistance
variable elastance
Opis:
The paper presents a hybrid (hydro-numerical) circulatory model built to be used as a complementary tool for clinical purposes. It was developed at the Institute of Biocybernetics and Biomedical Engineering - Polish Academy of Sciences (Poland) in co-operation with the Institute of Clinical Physiology - National Council of Research (Italy). Main advantages of the model are: 1) high accuracy and repeatability of parameters setting, characteristic of numerical solutions, 2) maximum flexibility achieved by implementing the largest possible number of the model’s elements in the numerical way, 3) ability to test mechanical heart assist devices provided by special computer applications; in the model two physically different signal environments - numerical and hydraulic - are connected by special impedance transformers interfacing physical and numerical parts of the model; 4) eliminating flowmeters, as the voltage controlled flow sources embedded in the system provide information on flows. In vitro tests were performed to evaluate the circulatory model: a) modelling and simulation of physiological and pathological states parameters vs. left ventricular end-systolic elastance (Emax l) and rest volume (Vol) variations, b) testing the effect of LVAD counterpulsation on circulatory hemodynamics and ventricular energetics; it resulted in the increase of total cardiac output (COLV tot) from pathological value 3.8 to 5.4 l·min−1, mean aortic pressure mPas from 67.8 to 96.1 mmHg and in the decrease of left atrial pressure mPla from 15.7 to 7.7 mmHg and External Work nEW by 37.5%. The model was verified based on literature data.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 4; 993-1003
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficient two-parameter estimator in linear regression model
Autorzy:
Dorugade, Ashok V.
Powiązania:
https://bibliotekanauki.pl/articles/1194454.pdf
Data publikacji:
2019-07-02
Wydawca:
Główny Urząd Statystyczny
Tematy:
multicollinearity
ridge regression
two-parameter estimator
mean squared error
Opis:
In this article, two-parameter estimators in linear model with multicollinearity are considered. An alternative efficient two-parameter estimator is proposed and its properties are examined. Furthermore, this was compared with the ordinary least squares (OLS) estimator and ordinary ridge regression (ORR) estimators. Also, using the mean squares error criterion the proposed estimator performs more efficiently than OLS estimator, ORR estimator and other reviewed two-parameter estimators. A numerical example and simulation study are finally conducted to illustrate the superiority of the proposed estimator.
Źródło:
Statistics in Transition new series; 2019, 20, 2; 173-185
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical model parameter estimation of a generating unit operating in the Polish National Power System
Autorzy:
Majka, Ł.
Paszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/199982.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
power system
generating unit
optimization
study of dynamic models
system zasilania
optymalizacja
badanie modeli dynamicznych
Opis:
In the paper, a method and results of parameter estimation of the mathematical model of a generating unit operating in the Polish National Power System are presented. Computations of the parameters were carried out based on measurement and simulation of dynamic waveforms of selected quantities of the generating unit. The problem of parameter identification was brought to minimization of the objective function determined by the vector of deviations between the approximated and approximating waveforms computed on the basis of the models expressed by the searched parameters. A hybrid optimization algorithm, being a serial combination of genetic and gradient algorithms, was used for minimization of the objective function. A methodology for filtering the recorded measurement signals is proposed in the paper. Method and results calculation of the sensitivity to changes of the model parameters of selected dynamic waveforms are also presented.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2016, 64, 2; 409-416
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model predictive control of four-leg three-level flying capacitor converter: influence of model parameter mismatch
Autorzy:
Antoniewicz, K.
Rafał, K.
Jasiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/1193479.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
multilevel converter
current control
model predictive control
MPC
shunt active power filter
SAPF
Opis:
This paper presents a control method for a four-leg three-level flying capacitor converter (FCC) operating as a shunt active power filter (SAPF), based on model predictive control with finite number of control states (FS-MPC). Current control and capacitor voltage balancing are described. Influence of the mismatch of the inductive filter model parameters on the current control precision is analysed. Results are supported by the experimental waveforms obtained with a 10kVA set-up.
Źródło:
Power Electronics and Drives; 2018, 3, 38; 1-9
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parameter identifiability for nonlinear LPV models
Autorzy:
Srinivasarengan, Krishnan
Ragot, José
Aubrun, Christophe
Maquin, Didier
Powiązania:
https://bibliotekanauki.pl/articles/2134053.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
parameter identifiability
parameter estimation
linear parameter varying model
parity space approach
null space
identyfikacja parametrów
szacowanie parametrów
spacja zerowa
Opis:
Linear parameter varying (LPV) models are being increasingly used as a bridge between linear and nonlinear models. From a mathematical point of view, a large class of nonlinear models can be rewritten in LPV or quasi-LPV forms easing their analysis. From a practical point of view, that kind of model can be used for introducing varying model parameters representing, for example, nonconstant characteristics of a component or an equipment degradation. This approach is frequently employed in several model-based system maintenance methods. The identifiability of these parameters is then a key issue for estimating their values based on which a decision can be made. However, the problem of identifiability of these models is still at a nascent stage. In this paper, we propose an approach to verify the identifiability of unknown parameters for LPV or quasi-LPV state-space models. It makes use of a parity-space like formulation to eliminate the states of the model. The resulting input-output-parameter equation is analyzed to verify the identifiability of the original model or a subset of unknown parameters. This approach provides a framework for both continuous-time and discrete-time models and is illustrated through various examples.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2022, 32, 2; 255--269
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extending the sheba propagatio model to reduce parameter-related uncertainties
Autorzy:
Pierantoni, G.
Coghlan, B.
Kenny, E.
Gallagher, P.
Perez-Suarez, D.
Powiązania:
https://bibliotekanauki.pl/articles/305331.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
heliophysics
HELIO
SCI-BUS
distributed computation infrastructure
propagation models
Opis:
Heliophysics is the branch of physics that investigates the interactions and correlation of different events across the Solar System. The mathematical models that describe and predict how physical events move across the solar system (ie. Propagation Models ) are of great relevance. These models depend on parameters that users must set, hence the ability to correctly set the values is key to reliable simulations. Traditionally, parameter values can be inferred from data either at the source (the Sun) or arrival point (the target) or can be extrapolated from common knowledge of the event under investigation. Another way of setting parameters for Propagation Models is proposed here: instead of guessing a priori parameters from scientific data or common knowledge, the model is executed as a parameter-sweep job and selects a posteriori the parameters that yield results most compatible with the event data. In either case ( a priori and a posteriori ), the correct use of Propagation Models requires information to either select the parameters, validate the results, or both. In order to do so, it is necessary to access sources of information. For this task, the HELIO project proves very effective as it offers the most comprehensive integrated information system in this domain and provides access and coordination to services to mine and analyze data. HELIO also provides a Propagation Model called SHEBA, the extension of which is currently being developed within the SCI-BUS project (a coordinated effort for the development of a framework capable of offering to science gateways seamless access to major computing and data infrastructures).
Źródło:
Computer Science; 2013, 14 (2); 253-272
1508-2806
2300-7036
Pojawia się w:
Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies