Wszystkie pola: low alloyed steels - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Influence of Molybdenum Addition on Mechanical Properties of Low Carbon HSLA-100 Steel
Wpływ dodatku molibdenu na własności mechaniczne niskowęglowej stali HSLA -100
Autorzy:: Bogucki, R.
Pytel, S.M.
Powiązania:: https://bibliotekanauki.pl/articles/352005.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: high strength low alloyed steels
HSLA steels
effect of copper and molybdenum additions
microstructure
mechanical properties
heat treatment
stal HSLA
dodatek miedzi i molibdenu
mikrostruktura
właściwości mechaniczne
obróbka cieplna
Opis:: The results of mechanical properties and microstructure observation of low carbon copper bearing steel with high addition of molybdenum are presented in this paper. This steels were characterized by contents of molybdenum in the range from 1% to 3% wt. After the thermo -mechanical processing the steels were subsequently quenched and tempered at different temperatures (500-800°C) for 1h. The changes of mechanical properties as function of tempering temperature were typical for the steel with the copper addition. The sudden drop of impact resistance after tempering from 575°C to 600°C was caused probably by precipitates of Laves phase of type Fe₂Mo.
W pracy przedstawiono wyniki badań własności mechanicznych oraz obserwacji mikroskopowych nisko węglowych stali z dodatkiem Cu o podwyższonej koncentracji molibdenu w zakresie od 1 do 3% wg. Po obróbce cieplno-plastycznej stale były hartowane i odpuszczane w rożnych temperaturach (500-800°C) przez 1 godzinę. Przebieg zmian własności mechanicznych w funkcji temperatury odpuszczania był zbliżony do przebiegu stali z dodatkiem miedzi. Silny spadek udarności po odpuszczaniu od 575 do 600°C spowodowany był prawdopodobnie procesami wydzieleniowymi fazy Lavesa typu Fe₂Mo.
Źródło:: Archives of Metallurgy and Materials; 2014, 59, 3; 859-864
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Suitability analysis of thermally hardened S540Q steel sheets for welded constructions working in low temperatures
Autorzy:: Cicholska, M.
Powiązania:: https://bibliotekanauki.pl/articles/246570.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: low-alloyed quality steels
heat treatment of S540Q steel
welded constructions
Opis:: The conventional heat treatment is being replaced by thermal-plastic treatment. The process of steel hardening is carried out on quenching press with a double-sided water spray at the temperatures ranging from 600 to 700°C. The steel hardening process is conducted at the temperatures of 600-700°C with cooling in the air. After this, thermal hardening the steel sheets obtain the structure of a layered tempered matrensite with carbide and cyanide disperse separations The thermally hardened S540Q steel sheets 12 mm thick underwent examinations. The welding technology was presented. The sheets were welded semi automatically by means of MAG method. The usual welding conditions normally applied in industry were used after steel standardisations. The achievement of joints metallically continuous was confirmed by X-ray tests. The static tensile test was conducted to assess the applicability of this steel. The average values of the welded joints resistance to tensile strength were given. After conducting technological bend, test good ductility was noted. Steel microstructure was defined as low carbon tempered matrensite of layered construction. Microstructure observation was carried out in the joint axis, in heat affected zone and in native material. Hardness measurements were performed according to PN-EN 1043-1:2000 requirements. Impact test was conducted on the samples with a V cut notch at the temperatures of -20, -40, -60 Celsius degrees.
Źródło:: Journal of KONES; 2013, 20, 3; 105-109
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The influence of welding on the hardness and weldability of thermally hardened S620Q steel sheets
Autorzy:: Cicholska, M.
Powiązania:: https://bibliotekanauki.pl/articles/241781.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: low-alloyed quality steels
heat treatment of S620Q steel
Opis:: The thermally hardened 12 mm sheets of S620Q steel underwent research. The sheets weldability was examined during semi-automatic welding by MAG method, at the welding conditions usually applied in industry for welding normalized sheets of this steel. The technology of welding was presented. The achievement of metallically continuous joints was confirmed by X-ray examination. For the purpose of usefulness assessment, samples were taken from test joints then the joints hardness distribution measurements were performed. The microstructure was examined and the static tensile tests as well as technological bend tests were carried out. Hardness measurements were performed in three measurement lines for each joint according to PN-EN 1043-1:2000 requirements. Joints microstructures were examined in the joints axis, in SWC and in native materials. Steel microstructures were classified as low carbon tempered martensite of layered construction. Mean values of the selected joints strengths were also presented. The tensile tests values of native materials of metallurgic certificates were given for the sake of comparison. The research results presented in the paper made it possible to determine the weldability of S620Q steel.
Źródło:: Journal of KONES; 2012, 19, 4; 127-130
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The weldability assessment of thermally hardened S540Q steel sheets
Autorzy:: Cicholska, M.
Powiązania:: https://bibliotekanauki.pl/articles/243177.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: low-alloyed quality steels
heat treatment of S540Q steel
welded constructions
Opis:: High strength thermally hardened steels are more difficult to weld than low carbon construction steels. There is a danger of cold cracking caused by the presence of martensite in welded joints. The thermally hardened 12 mm sheets of S540Q steel underwent research. The sheets were welded semi-automatically by MAG method, in the welding conditions usually applied in industry for welding normalized sheets of this steel. The welding technology was presented. The X-ray tests were performer, which confirmed the achievement of metallically continuous joints. Samples were taken from the joints and the joints hardness distribution measurements were conducted. The microstructure was examined and the static tensile tests as well as technological bend tests were carried out. Hardness measurements were performed in three measurement lines for each joint according to PN-EN 1043-1:2000 requirements. Joints microstructures were examined in the joints axis, in HAZ and in native materials. Steel microstructures were classified as low carbon tempered matrensite of layered construction. Mean values of the selected joints tensile strengths were also presented. The tensile tests values of native materials of metallurgic certificates were given for the sake of comparison. The research results presented in the paper made it possible to determine the weldability of S540Q steel.
Źródło:: Journal of KONES; 2014, 21, 4; 43-48
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Optimization of the Q-P Process Parameters for Low Alloyed Steels with 0.2% C
Obróbka Q-P dla stali o zawartości 0.2% C
Autorzy:: Jirková, H.
Kučerová, L.
Aišman, D.
Mašek, B.
Powiązania:: https://bibliotekanauki.pl/articles/354010.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: Q-P process
retained austenite
RA
AHSS
carbon content
obróbka Q-P
austenit szczątkowy
zawartość węgla
stal
Opis:: In steels which are treated by the quenching and partitioning (Q&P) process, carbon content is one of the crucial parameters because carbon contributes greatly to stabilization of retained austenite and strengthens the material. In the present study, the Q&P process was gradually optimised for two low-alloyed steels with 0.2 % carbon content and with and without Cr addition. The results show that the cooling rate, as well as the austenitizing temperature, has a pronounced effect on microstructure evolution. The strength and elongation in the Mn, Si and Cr-alloyed steel was approx. 900 MPa and more than 30 %, respectively.
W stalach poddanych obróbce hartowania i partycjonowania (Quenching and Partitioning – Q&P), zawartość węgla jest jednym z kluczowych parametrów, ponieważ węgiel znacząco wpływa na stabilizacje austenitu szczątkowego i umacnia materiał. W niniejszych badaniach obróbka Q&P była stopniowo optymalizowana dla dwóch niskostopniowych stali o zawartości węgla 0, 2% zawierających dodatek chromu oraz bez tego dodatku. Wyniki pokazują wyraźny wpływ szybkości chłodzeniaoraz temperatury austenityzacji na ewolucje mikrostruktury. Wytrzymałość na rozciąganie oraz wydłużenie do zerwania w manganowo-krzemowo-chromowej stali wyniosły odpowiednio ok.900 MPa oraz ponad 30%.
Źródło:: Archives of Metallurgy and Materials; 2014, 59, 3; 1205-1210
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Microstructure Examinations in Corners of the Low-Carbon Steel Slabs from Continuos Caster Machine
Autorzy:: Kwinta, G.
Kara, S.
Kalandyk, B.
Zapała, R.
Pałka, P.
Powiązania:: https://bibliotekanauki.pl/articles/351069.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: API 5L line pipe steels
low-carbon micro alloyed steel
microstructure
non-metallic inclusion
Opis:: The exposed selvedge layers in slabs cast by the continuous process should be free from surface defects, which in most cases appear in the form of cracks on the casting surface and run to its interior. In addition to the parameters of the casting process, the occurrence of such defects depends on the chemical composition of cast steel, on the segregation of surface active elements and formation of the precipitates of carbides, nitrides and other phases. Due to the frequent occurrence of defects in corners of the slabs, non-destructive testing was performed on the mechanically cleaned surfaces of slabs. The test material was low-carbon API(American Petroleum Institute API 5L standard) steel micro alloyed with Nb and Ti designed for the production of pipes to handle gas, oil and other liquid and gaseous fuels. Despite the use of different methods of inspection, i.e. ultrasonic, magnetic particle and penetrant, cracks were not traced in the examined material. Then, from the corners of the examined slabs, specimens were cut out for metallographic examinations. The main purpose of these examinations was to disclose the presence of possible cracks and micro cracks on the surfaces transversal and longitudinal to the direction of casting. At the same time, studies were conducted to establish the number and morphology of non-metallic inclusions in selvedge layers of the slab corners and axis. Additionally, hardness of the slabs was measured. The conducted studies revealed only some minor differences in the slab hardness along its axis (130 ÷ 135 HB) and in selvedge layers (120 ÷ 123 HB).
Źródło:: Archives of Metallurgy and Materials; 2016, 61, 4; 2051-2056
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Oxygen-blowing remelts of low-alloyed Cr-Mn-Ni-Mo steels with the variable oxidation rate of carbon, chromium and phosphorus
Wpływ sposobu wytapiania stali niskostopowej na szybkość utleniania węgla, chromu i fosforu
Autorzy:: Sobula, S.
Głownia, J.
Powiązania:: https://bibliotekanauki.pl/articles/263917.pdf
Data publikacji:: 2005
Wydawca:: Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:: wytopy odzyskowe
świeżenie tlenem
świeżenie rudą żelaza
utlenianie fosforu
staliwa niskostopowe
remelting process
oxidation of phosphorus
oxygen blowing
Iow alloyed steels
Opis:: Low-alloy Cr-Mn-Ni-Mo cast steels and high-alloy manganese cast steels are frequently use as castings in such areas as mineral industry and power industry. Melting technology of these steels is often based on the use the return-scrap in charge, because the prices of nickel and molybdenum are very high. Basic eleetric are furnaces were used in the oxidation remelting of high manganese and Iow alloyed Cr-Mn-Ni-Mo steel scraps. The measuring of bath temperature and chemical eomposition were realized for control of C, P and Cr oxidation rates. This article shows effect of two methods of carbon boil, used in remelting technology: first is carbon oxydation by iron ore and second is oxygen-blowing. The results of these measurements showed that at the oxygen blowing under the pressure of ca 0,6-0,8 MPa and oxygen capacity of 0,37-0,60 Nm3/(min·Mg), the average value of decarburisation rate is 1,03-2,08% C/h, according the temperature of the bath. In the same condition of oxidation, the dephosphorisation rate in Cr-Mn-Ni-Mo is 0-0,12% P/h. It was shown that the temperatures above 1620 degrees C protected steel bath against high chromium losses. At these temperatures the average value of phosphor oxidation rate is 0,070% P/hour.
Niskostopowe stale chromowo-manganowo-niklowo-molib-denowe i stale wysokostopowe manganowe są chętnie stosowane w przemyśle przeróbczym minerałów i energetyce. Technologia wytwarzania tych stali opiera się głównie na przetapianiu złomu stopowego, ze względu na cenę molibdenu czy niklu. Do przetapiania złomu stali stopowej metodą odzyskowo-tlenową stosowano zasadowe piece łukowe. W celu określenia parametrów utleniania węgla, chromu i fosforu wykonywano pomiary temperatury kąpieli i analizy składu chemicznego. W artykule zamieszczono wyniki utleniania stali za pomocą rudy żelaza i tlenu gazowego. Pokazują one, że zastosowanie tlenu gazowego przy ciśnieniu 0,6-0,8 MPa i przepływie 0,37-0,60 Nm3/(min·Mg), pozwala uzyskać średnią szybkość utleniania węgla 1,03-2,08% C/h, w zależności od temperatury kąpieli. W tych samych warunkach uzyskano szybkość utleniania fosforu 0-0,13% P/h. Wysoka temperatura świeżenia powyżej 1620 stopni C zabezpiecza przed dużymi stratami chromu, i zapewnia średnią szybkość utleniania fosforu 0,070% P/h.
Źródło:: Metallurgy and Foundry Engineering; 2005, 31, 1; 67-73
1230-2325
2300-8377
Pojawia się w:: Metallurgy and Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Abrasive Wear of Alloyed Cast Steels Applied for Heavy Machinery
Autorzy:: Studnicki, A.
Kondracki, M.
Suchoń, J.
Szajnar, J.
Bartocha, D.
Wróbel, T.
Powiązania:: https://bibliotekanauki.pl/articles/380173.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: low alloyed cast steel
chromium cast steel
abrasive wear
pin on disc method
staliwo niskostopowe
staliwo chromowe
zużycie ścierne
metoda "pin on disc"
Opis:: In the paper the results and analysis of abrasive wear studies were shown for two grades of cast steels: low-alloyed cast steel applied for heavy machinery parts such as housing, covers etc. and chromium cast steels applied for kinetic nodes of pin-sleeve type. Studies were performed using the modified in Department of Foundry pin-on-disc method.
Źródło:: Archives of Foundry Engineering; 2015, 15, 1; 99-104
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Tribological behavior of low-alloyed steel after nitriding
Autorzy:: Vicen, Martin
Bokůvka, Otakar
Nikolić, Ružica
Bronček, Jozef
Powiązania:: https://bibliotekanauki.pl/articles/1839516.pdf
Data publikacji:: 2020
Wydawca:: Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:: low alloyed steels
nitriding
tribology
behavior
stale niskostopowe
azotowanie
trybologia
zachowanie
Opis:: The tribological properties of the nitride layer applied to the low-alloyed steel were investigated in this research. Experimental work included determination if the chemical composition, wear resistance, Rockwell, Vickers and nano-indentation tests, both of the substrate material – the low-alloyed steel and the deposited nitride layer. From the results obtained in those experiments authors concluded that applying the nitride layer does not significantly improve the tribological properties of the tested lowalloyed steel samples, thus this process is not recommended for achieving that purpose.
Źródło:: Production Engineering Archives; 2020, 26, 3; 78-83
2353-5156
2353-7779
Pojawia się w:: Production Engineering Archives
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "low alloyed steels" wg kryterium: Wszystkie pola

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język