Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "gas separation" wg kryterium: Wszystkie pola


Tytuł:
Modelling the gas flow in permeate channel in membrane gas separation process
Autorzy:
Szwast, M.
Powiązania:
https://bibliotekanauki.pl/articles/185832.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas separation
perfect mixing
Peclet number
CFD
separacja gazów
mieszanie
Opis:
This paper analyses the real behaviour of the fluid in the channels of a three-end membrane module. The commonly accepted mathematical model of membrane separation of gas mixtures in such modules assumes a plug flow of fluid through the feed channel and perfect mixing in the permeate channel. This article discusses the admissibility of accepting such an assumption regarding the fluid behaviour in the permeate channel. Throughout analysis of the values of the Péclet number criterion, it has been demonstrated that in the industrial processes of membrane gas separation, the necessary conditions for the perfect mixing in the permeate channel are not met. Then, CFD simulations were performed in order to establish the real fluid behaviour in this channel. It was proved that in the permeate channel the fluid movement corresponds to the plug flow, with the concentration differences at both ends of the module being insignificant. In view of the observations made, the admissibility of concentration stability assumptions in the mathematical models for the permeate channel was discussed.
Źródło:
Chemical and Process Engineering; 2018, 39, 3; 271--280
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Membrane gas separation module with pulsed retentate for low-permeable component recovery
Autorzy:
Battalov, Stanislav V.
Trubyanov, Maxim M.
Puzanov, Egor S.
Sazanova, Tatyana S.
Drozdov, Pavel N
Vorotyntsev, Ilya V.
Powiązania:
https://bibliotekanauki.pl/articles/185429.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
membrane gas separation
unsteady-state operation
process intensification
separation
efficiency
membrane module
separacja gazów membranowych
operacja niestabilna
intensyfikacja procesu
separacja
wydajność
moduł membranowy
Opis:
The paper presents the experimentalstudy of a novel unsteady-statemembrane gas separation approachfor recovery of a slow-permeant component in the membrane module with periodical retentate with-drawals. The case study consisted in the separation of binary test mixtures based on the fast-permeantmain component (N2O, C2H2) and the slow-permeant impurity (1% vol. of N2)using a radial counter-current membrane module. The novel semi-batch withdrawal technique was shown to intensify theseparation process and provide up to 40% increase in separation efficiency compared to a steady-stateoperation of the same productivity.
Źródło:
Chemical and Process Engineering; 2019, 40, 1; 57--65
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New composite polymer membranes for biogas separation
Autorzy:
Bojarska, M.
Szwast, M.
Piątkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/115604.pdf
Data publikacji:
2011
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
biogas
gas separation
membranes for gas separation
Opis:
Biogas can be used as an alternative energy source. Unfortunately presence of carbon dioxide in a composition of biogas makes compression and transportation difficult. In addition CO2 makes biogas lower calorific. That is why new methods for carbon dioxide separation from biogas are to be explored. Obtained results for polypropylene membranes modifications by polydimethylosiloxanes are presented in this paper.
Źródło:
Challenges of Modern Technology; 2011, 2, 1; 65-68
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wzbogacanie gazu ziemnego – model numeryczny membranowego rozdziału składników gazowych
Natural gas upgrading - mathematical model of membrane gas separation
Autorzy:
Szwast, M.
Sobczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/2072984.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
modelowanie
membranowa separacja gazów
gaz ziemny
modelling
membrane gas separation
natural gas
Opis:
Przedstawiono model pojedynczej kapilary membranowej, na której zachodzi separacja mieszaniny gazowej. Symulacje przeprowadzono w programie Comsol Multiphysics, który wykorzystuje metodę elementów skończonych do aproksymacji rozwiązań układów równań różniczkowych. Model matematyczny oparto na równaniu Naviera-Stokesa i równaniu ciągłości oraz równaniu konwekcji i dyfuzji składnika z uwzględnieniem modelu rozpuszczalnościowo-dyfuzyjnego dla transportu składnika przez membranę nieporowatą. Przedstawiono przykładowe wyniki symulacji dla rozdziału metanu i dwutlenku węgla.
The single membrane capillary model of gas separation is presented. Some simulations were performed in Comsol Multiphysics software that uses the finite element method to approximate solution of the differential equations’ systems. The mathematical model is based on the Navier-Stokes equation, continuity equation, diffusion and convection equation including the solution-diffusion model of gas transport through nonporous membrane. Some exemplary results of simulations are also presented.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 4; 302--303
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gas separation in MMK-PMP-ST and LAMBDA membrane module
Separacja gazów w membranowych modułach MMK-PMP-ST i LAMBDA
Autorzy:
Kluziński, W.
Gierycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/257681.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
separacja
gaz
moduł membranowy
powietrze
azot
wodór
gas separation
membrane module
air
hydrogen
nitrogen
poly-4-methylopentane-1
Opis:
The air separation was carried out using two MMK-PMP-ST and one LAMBDA industrial (Institute of Chemical Fibers, Łódź, Poland) membrane modules. The investigations have been performed in a pilot plant scale installation especially designed for this purpose. The separation measurements have been done at pressure ratio equal to 0.1 and 0.2. An extra investigation, concerning the separation of the hydrogen, has been done using the LAMBDA module, for the hydrogen-nitrogen mixture. Obtained separation results have been discussed from the point of view of efficiency and conditions of using membrane modules for such purposes. The results have been also used for evaluation of quality and properties of the membrane modules.
Przeprowadzono separację powietrza w przemysłowych, membranowych modułach MMK-PMP-ST i LAMBDA (wyprodukowanych przez Instytut Włókien Chemicznych w Łodzi), w półtechnicznej skali, na specjalnie zaprojektowanej do tego celu aparaturze. Pomiary wykonano dla różnych stosunków ciśnień w dwóch modułach MMK-PMP-ST różniących się powierzchnią separacji i module LAMBDA. Moduł LAMBDA zastosowano dodatkowo do separacji wodoru z mieszaniny wodór-azot. Otrzymane wyniki doświadczalne zostały przedyskutowane z punktu widzenia warunków stosowania modułów MMK-PMP-ST i LAMBDA oraz wydajności prowadzonych procesów separacji powietrza i wodoru. Ponadto posłużyły one do określenia własności i jakości badanych modułów membranowych.
Źródło:
Problemy Eksploatacji; 2009, 3; 107-116
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opracowanie nowej immobilizowanej membrany ciekłej do rozdziału składników gazowych
Development of a new immobilized liquid membrane for separation of gaseous components
Autorzy:
Szwast, M.
Powiązania:
https://bibliotekanauki.pl/articles/2072179.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
membrany
SLM
separacja gazów
membranes
gas separation
Opis:
W pracy wykonano i przebadano własną membranę immobilizowaną(SLM) zbudowaną z mikroporowatej membrany polipropylenowej i oleju silikonowego. W tym celu opracowano metodę uzyskiwania modułów membranowych zawierających membrany SLM. Przeprowadzono badania z użyciem gazów 02, N2 i C02. Uzyskane wyniki wskazują, że tego typu membrana charakteryzuje się dużymi przepuszczalnościami, ale jednocześnie dość niskimi współczynnikami separacji.
In this paper the authors' own SLM membrane is presented. For the purpose of this work a new immobilized membrane was prepared using a micropo- rous polypropylene membrane and silicone oil. A new method for obtaining such membrane modules was developed. Tests were conducted using such gases as 02, N2 and C02. The obtained results indicate that this type of mem-brane is characterized by large permeability factors but also by quite small separation factors.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 485--486
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ stężenia roztworu modyfikującego na kompozytową membranę PP/PDMS do separacji gazów
Influence of the modifying solution concentration on composite membranę PP/PDMS for gas separation
Autorzy:
Bojarska, M.
Macierzyńska, I.
Szwast, M.
Piątkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/2071360.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
separacja gazów
membrana kompozytowa
PDMS
gas separation
composite membrane
Opis:
Najczęściej wykorzystywane do separacji gazów są membrany kompozytowe, składające się z warstwy nośnej i selektywnej. Zasadnicza separacja odbywa się w warstwie selektywnej, dlatego właśnie skupiono się na doborze odpowiednich warunków jej wytwarzania. Analiza wyników pozwala stwierdzić, iż niskie stężenia należy wykorzystywać do wykonywania warstwy uszczelniającej. Natomiast do warstwy selektywnej należy wybierać wyższe stężenia, co w efekcie daje jednolitą i o średniej grubości warstwę. Słowa kluczowe: separacja gazów, membrana kompozytowa, PDMS
Composite membranes are frequently used for gas separation. They ar made of a support and selective layer. Separation takes place in the sclectiv layer. Our attention was focuscd on the selection of appropriate modificatio conditions. It was found that low concentrations should be used to perfon the sealing layer. However, the selective layer should be made from highc concentrations. Which results in an average thickness and uniform layer.
Źródło:
Inżynieria i Aparatura Chemiczna; 2011, 5; 22-23
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical interpretation of a mathematical model of membrane gas separation with energy transfer by gas flowing in a channel to gas penetrating this channel from the adjacent channel
Autorzy:
Szwast, M.
Szwast, Z.
Powiązania:
https://bibliotekanauki.pl/articles/185839.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas separation
membrane
mathematical model
separacja gazów
membrana
model matematyczny
Opis:
Comparative calculations with a mathematical model designed by the authors, which takes into consideration energy transfer from gas flowing through a given channel to gas which penetrates this channel from an adjacent channel, as well as a model which omits this phenomenon, respectively, were made for the process of separating gas mixtures carried out with an inert sweep gas in the fourend capillary membrane module. Calculations were made for the process of biogas separation using a PMSP polymer membrane, relative to helium as the sweep gas. It was demonstrated that omitting the energy transfer in the mathematical model might lead to obtaining results which indicate that the capacity of the process expressed by the value of feed flux subjected to separation is by several percent higher than in reality.
Źródło:
Chemical and Process Engineering; 2018, 39, 2; 209--222
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie procesu rozdzielania mieszanin gazowych z udziałem płaskich nieporowatych membran polimerowych
Mathematical modeling of gas mixtures separation using flat dense polymeric membranes
Autorzy:
Szwast, M.
Szwast, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2072130.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
membrany
separacja gazów
modelowanie matematyczne
membranes
gas separation
mathematical modeling
Opis:
W pracy przedstawiono własny model matematyczny procesu separacji składników gazowych przy użyciu płaskiej nieporowatej membrany polimerowej. Model opisuje proces rozdziału dwóch składników gazowych przy udziale gazowego składnika odbierającego po drugiej stronie membrany. Zaprezentowano równania różniczkowe opisujące przebieg tego procesu, a także przedstawiono przykładowe wyniki obliczeń numerycznych dla rozdziału mieszaniny CH4 i CO2 (wzbogacanie biogazu) przy użyciu membrany wykonanej z PDMS.
The paper presents the authors' own mathematical model of gas separation using a flat dense polymeric membrane. The model describes a separation process of two gaseous components with the presence of third gaseous component as a receiver on the other side of the membrane. Differential equations describing this process as well as some exemplary numerical calcula¬tion for the separation of CH4 and CO2 mixture (biogas enrichment) using a membrane made of PDMS are presented in the paper.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 6; 575--576
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Air separation in PVTMS membrane module
Separacja powietrza w membranowym module PVTMS
Autorzy:
Kluziński, W.
Gierycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/258132.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
separacja gazów
moduł membranowy
powietrze
poliwinylotrimetylosilan
gas separation
membrane module
air
polyvinyltrimethylsilane
Opis:
The air separation was carried out using Russian industrial (Kriogenmash) PVTMS membrane module. The investigations have been performed in a pilot plant scale installation especially designed for this purpose. The separation measurements have been done, at different pressure ratios, for four types of membrane module sets as follows: one membrane module; a set of two parallel membrane modules; a set of two serial membrane modules with permeate from the first one feeding the second module; and, a set of two serial membrane modules with retentate from the first one feeding the second module. Obtained separation results have been discussed from the point of view of efficiency and conditions of using PVTMS membrane modules for such purposes. The results have been also used for evaluation of quality and properties of the membrane module.
Przeprowadzono separację powietrza w rosyjskim, przemysłowym (Kriogenmash), membranowym module PVTMS, w półtechnicznej skali, na specjalnie zaprojektowanej do tego celu aparaturze. Pomiary wykonano dla różnych stosunków ciśnień i czterech różnych układów modułów membranowych: pojedynczego modułu, układu dwóch równolegle połączonych modułów, układu dwóch szeregowo połączonych modułów, w którym moduł drugi był zasilany permeatem z modułu pierwszego oraz układu dwóch szeregowo połączonych modułów, w którym moduł drugi był zasilany retentatem z modułu pierwszego. Otrzymane wyniki doświadczalne zostały przedyskutowane z punktu widzenia warunków stosowania modułów PVTMS oraz wydajności prowadzonych procesów separacji powietrza. Ponadto, posłużyły one do określenia własności i jakości badanych modułów membranowych.
Źródło:
Problemy Eksploatacji; 2008, 4; 101-112
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Określenie możliwości odwadniania gazu ziemnego na membranach polimerowych
Possibility of natural gas dehydration using polymer membranes
Autorzy:
Janocha, A.
Powiązania:
https://bibliotekanauki.pl/articles/1835457.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
membranowa separacja gazowa
osuszanie gazu ziemnego
membrane gas separation
natural gas dehydration
Opis:
Osuszanie gazu ziemnego na instalacjach glikolowych jest energochłonne i emituje do środowiska niebezpieczne związki chemiczne. Przeprowadzono badania osuszania azotu, metanu i gazu ziemnego na module membranowym. Badania wykonywano na mikrokapilarnych membranach (hollow fiber) z poliimidu. Moduł membranowy zamontowany był na stanowisku pomiarowym do badań w warunkach wysokiego ciśnienia gazu. Prowadzono pomiary przepływu strumieni gazu, ciśnienia, temperatury i wilgotności w strumieniach nadawy, retentatu i permeatu. Uzyskano wysokie stopnie obniżenia wilgotności w gazach. Stwierdzono, że efektywność osuszania gazu po kontakcie z membraną zależy od wartości przepływów i od ciśnienia. Wraz ze wzrostem ciśnienia transmembranowego efektywność odwodnienia się zwiększa. Przy ciśnieniu gazu powyżej 10 bar uzyskiwany jest poziom zawilgocenia odpowiadający wymaganiom normy osuszania gazu ziemnego w zimie, przy współczynniku podziału powyżej 0,08. Przy ciśnieniu gazu powyżej 45 bar norma osuszania spełniona jest przy współczynniku podziału poniżej 0,01. Wykazano, że technologia membranowa stanowi atrakcyjną metodę osuszania gazu ziemnego na membranach.
Dehydration of natural gas at glycol installations is energy-consuming and emits hazardous chemicals to the environment. Dehydration tests of nitrogen, methane and natural gas on a membrane module were conducted. The tests were conducted on microcapillary membranes (hollow fiber) made of polyimide. The membrane module was mounted on a test station in high gas pressure conditions. The flow of the streams of gas, pressure, temperature and humidity in the streams of feed, retentate and permeate were conducted. High levels of humidity reduction in gases were obtained. It was found that the dehydration effectiveness of gas, after contact with the membrane, depends on the values of flows and pressure. With the increase of the transmembrane pressure, the effectiveness of dehydration increases. At a gas pressure above 10 bar, the level of humidity achieved is corresponding to the requirements of the standards for dehydration of natural gas in winter, with a partition coefficient (stage cut) above 0.08. At a gas pressure above 45 bar, the standard for dehydration is met at a partition coefficient of less than 0.01. It was proven that the membrane technology is an attractive method for natural gas dehydration on membranes.
Źródło:
Nafta-Gaz; 2017, 73, 7; 502-509
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Selected Parameters of Organic-Inorganic Hybrid Membranes Based on Various Polymers and Nd-Fe-B Fillers
Autorzy:
Rybak, A.
Kaszuwara, W.
Powiązania:
https://bibliotekanauki.pl/articles/352783.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
organic-inorganic hybrid membranes
magnetic measurements
rheological parameters
mechanical properties
gas separation
Opis:
In this paper magnetic organic-inorganic hybrid membranes based on EC, PPO polymer matrices and various magnetic powder microparticles were synthesized and studied. Constant pressure permeation technique and the Time Lag method were used to obtain the gas transport coefficients. The mechanical, rheological and magnetic parameters of magnetic hybrid membranes were examined. It was found that their separation and gas transport properties (D, P, S and α) were improved with the decrease in powder particle size and the increase of membrane’s remanence, saturation magnetization and magnetic particle filling. The increase of the magnetic powder addition and a decrease of its granulation improved also mechanical and rheological parameters of the tested membranes. This improvement also had a positive effect on their gas separation properties and their potential usage in the future.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 4; 1825-1832
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method of effective use of methane and nitrogen separated from natural gases
Metody efektywnego wykorzystania metanu i azotu z naturalnych gazów
Autorzy:
Olajossy, A.
Powiązania:
https://bibliotekanauki.pl/articles/219379.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
separacja gazu naturalnego
metan
azot
klinoptylolit
natural gas separation
methane
nitrogen
clinoptilolite
Opis:
A mature concept of separation of natural gases, which usually contain methane and nitrogen, is the presented in the paper. As a result of ion-exchange with metal cations: Na, K, Mg followed by high-temperature roasting, clinoptilolite becomes a zeolite molecular sieve, that has kinetic diameter of 3.7 A. As a result high-methane gas can be obtained 95 vol% methane, that can be directly sent to the gas network. The methane recovery exceeds 95%, whereas the outlet methane in nitrided gas losses are below 3 vol%. An idea was put forward to use the obtained nitrogen in enhanced oil recovery technology.
W zaazotowanych złożach gazu ziemnego występują też takie, w których zawartość azotu nie przekracza 35% vol. Zatem przeważa w nich metan, który jednak nie może być wykorzystany jako gaz opałowy (handlowy), a tym bardziej jako gaz przesyłowy do sieci. Podniesienie koncentracji metanu w tych zaazotowanych gazach staje się możliwe wskutek opracowania odpowiednio efektywnej metody odseparowania metanu z mieszaniny gazów. W artykule prezentowana jest dojrzała koncepcja takiej technologii, która umożliwia zarówno wykorzystanie metanu, jaki i azotu pochodzących z odwiertów zaazotowanego gazu. Bazowym materiałem używanym w tej technologii jest klinoptylolit jako glinokrzemian wydobywany ze złóż naturalnych np. na Słowacji. Z materiału tego wskutek dokonania wymiany jonowej kationów metali: Na, K, Mg oraz wysokotemperaturowego spiekania, można wytworzyć specyficzne zeolitowe sito molekularne (ZMS). Cechuje się ono bardzo korzystną właściwością, a mianowicie wysoką kinetyczną selektywnością rozdziału mieszaniny gazów. Sito to dobrze adsorbuje azot, a wydajnie przepuszcza metan wraz z wyższymi węglowodorami, których molekuły mają średnicę większą od 3,7 angstrema. Proponuje się wykonanie na takim adsorberze względnie prostych cykli operacji próżniowej zmiennociśnieniowej adsorpcji (VPSA). Są to przede wszystkim operacje: wysokociśnieniowej adsorpcji, dwustopniowej desorpcji oraz wyrównywania ciśnień między adsorberami. Są one poprzedzone wykonaniem oczyszczania i przygotowania mieszaniny gazów we wstępnym segmencie instalacji. Taka kilkuadsorberowa instalacja VPSA jest korzystnie jednomodułowa. Może ona przerabiać od 1 tys. m3 na godzinę do 10 tys. m3 na godzinę gazu zaazotowanego (o zawartości azotu mniejszej od 35% vol). Produkt tej instalacji będzie się cechował dobrymi parametrami. Mianowicie będzie to gaz wysokometanowy o zawartości powyżej 95% vol CH4 pod wysokim ciśnieniem. Natomiast strata metanu w azocie (jako w gazie inertnym) będzie mała, bo niższa od 3% vol CH4. Produkt o takim stopniu czystości może być podawany bezpośrednio do sieci gazu. Ponadto sprawność uzysku metanu w tej instalacji będzie wyższa od 90%. Przedstawione okoliczności będą pozytywnie oddziaływać na aspekt ekonomiczny praktycznego zastosowania prezentowanej koncepcji. Co więcej w sytuacji, gdy taka instalacja będzie posadowiona na złożu ropno - gazowym o obniżającym się już wydobyciu ropy, może być wykorzystany również azot pochodzący z tej instalacji. Zaproponowano zatłaczanie tego azotu z powrotem do złoża celem wspomagania wydobycia ropy w technologii EOR.
Źródło:
Archives of Mining Sciences; 2012, 57, 2; 443-450
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Mathematical Model of Membrane Gas Separation with Energy Transfer by Molecules of Gas Flowing in a Channel to Molecules Penetrating this Channel from the Adjacent Channel
Autorzy:
Szwast, M.
Szwast, Z.
Powiązania:
https://bibliotekanauki.pl/articles/185043.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
membrane
membrane module
reciprocal transfer of energy between gas molecules
changes of the pressure of gas along the length of flow channel
membrana
wzajemne przekazywanie energii między cząsteczkami gazu
zmiany ciśnienia gazu na długości kanału przepływowego
Opis:
The paper presents the mathematical modelling of selected isothermal separation processes of gaseous mixtures, taking place in plants using membranes, in particular nonporous polymer membranes. The modelling concerns membrane modules consisting of two channels – the feeding and the permeate channels. Different shapes of the channels cross-section were taken into account. Consideration was given to co-current and counter-current flows, for feeding and permeate streams, respectively, flowing together with the inert gas receiving permeate. In the proposed mathematical model it was considered that pressure of gas changes along the length of flow channels was the result of both – the drop of pressure connected with flow resistance, and energy transfer by molecules of gas flowing in a given channel to molecules which penetrate this channel from the adjacent channel. The literature on membrane technology takes into account only the drop of pressure connected with flow resistance. Consideration given to energy transfer by molecules of gas flowing in a given channel to molecules which penetrate this channel from the adjacent channel constitute the essential novelty in the current study. The paper also presents results of calculationsobtained by means of a computer program which used equations of the derived model. Physicochemical data concerning separation of the CO2/CH4 mixture with He as the sweep gas and data concerning properties of the membrane made of PDMS were assumed for calculations.
Źródło:
Chemical and Process Engineering; 2015, 36, 2; 151-169
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separacja siarkowodoru z gazu ziemnego w kaskadowych układach technologii membranowej
Separation of hydrogen sulphide from natural gas in cascade systems of membrane technology
Autorzy:
Janocha, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/1833995.pdf
Data publikacji:
2020
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
moduły membranowe
separacja gazowa
siarkowodór
gaz ziemny
membrane modules
gas separation
hydrogen sulphide
natural gas
Opis:
Under the new economic conditions, the exploitation of sour gas deposits reduces profits when using the conventional processes used to prepare gas for transport. Adding an inexpensive membrane unit as a preliminary technology before the classic quite energyconsuming amine absorption process (hybridization) can significantly reduce the cost of removing acidic components from natural gas. The article is a continuation of the author’s previous publications related to the research on the separation of several CH4–H2S mixtures. Gaseous separation tests were carried out on modules with polyimide membranes in a wide range of pressures. The scope of the conducted separation tests was extended to concentrations of 22% H2S in the gas mixture. Based on the experimental results, data for simulations and forecasts necessary for the evaluation and comparison of two-module cascade systems were obtained. The influence of the pressure of the gas flowing through the membrane (permeate) on the separation effects was determined. Increasing the pressure of the permeate flux reduces the concentration of hydrogen sulphide in it and increases the loss of methane. It was found that the ratio of the inlet gas pressure to the permeate pressure is of greater importance than the pressure difference. Single-stage membrane systems are sufficient for gas containing more than 12% H2S, for less sulfurized gases a two-stage cascade system is suggested. In the case of low concentrations of H2S in the gas, the methane losses in the one-stage system are too high. The article compares two variants of two-module cascade membrane systems. The paper presents comparative results of hydrogen sulphide content in simulation calculations for inlet gas with a concentration of 7.73% for both systems with a compressor before and after the second separation stage. The calculations showed that for the variant with the compressor before the second modulus, the H2S concentrations in the product streams are more favourable. H2S removal rates from the inlet gas were calculated for both systems. The influence of the permeate composition on the phase phenomena related to their condensation and compression for injection into the bed together with the acid gas from the amine part of the hybrid installation was considered.
Źródło:
Nafta-Gaz; 2020, 76, 12; 935--943
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania separacji siarkowodoru z gazu zasiarczonego przy różnych konfiguracjach modułów membranowych
Investigation of hydrogen sulphide separation from sour gas at various configurations of membrane modules
Autorzy:
Janocha, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/1835016.pdf
Data publikacji:
2019
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
moduły membranowe
separacja gazowa
siarkowodór
gaz ziemny
membrane modules
gas separation
hydrogen sulphide
natural gas
Opis:
W artykule zawarto studium przypadku zastosowania dwustopniowych układów membranowych w technologii separacji siarkowodoru z gazu. Zaprojektowano laboratoryjną instalację ciśnieniową, dostosowując ją do prowadzenia testów z dwoma modułami membranowym. Testy wykonano na mieszance wzorcowej o stężeniu 7,73% H2S w metanie przy różnych stosunkach przepływu permeatu do nadawy dla różnych konfiguracji modułów membranowych. Testy prowadzono w układzie jednomodułowym i w układach dwumodułowych w konfiguracji szeregowej i kaskadowej. Przedstawiono równania bilansowe charakteryzujące poszczególne układy modułowe. Obliczono i zbilansowano stężenia i przepływy strumieni pośrednich oraz produktowych w zależności od przepływu i współczynnika podziału. Stwierdzono, że moduły różnią się przepuszczalnością i selektywnością. Symulowano zawracanie sprężonych części strumieni produktowych o stężeniu równym nadawie w warunkach pomiarowych badanych modułów dla układu szeregowego i kaskadowego. W konfiguracji szeregowej dla ciśnienia 60 bar współczynniki podziału wynosiły odpowiednio: Ѳ1 = 0,15; Ѳ2 = 0,52. W konfiguracji kaskadowej ciśnienia wlotowe na moduły wynosiły 76 bar i 16 bar, a współczynnik podziału Ѳ1 = 0,11; Ѳ2 = 0,37. Stopień usunięcia H2S ze strumienia gazu wlotowego w układzie szeregowym jest wyższy (74%) niż w układzie kaskadowym (25%). Straty metanu w układzie szeregowym wynoszą 23% i są znacznie wyższe niż w układzie kaskadowym, w którym ubytek metanu wynosił 2,2%. Wypracowana metoda symulacji i prognoz na podstawie testów eksperymentalnych na membranach mieszanin CH4 – H2S umożliwi uzyskanie danych niezbędnych do praktycznego zastosowania technologii membranowej, w tym w hybrydowych procesach odsiarczania gazu ziemnego. Praca wykazała możliwość wykorzystania technologii membranowej do odsiarczania gazu ziemnego. Wyniki testów wykazały możliwość znaczących zmian w składach strumieni produktowych w prowadzonym procesie separacji membranowej.
The article contains a case study of the use of two-stage membrane systems in the technology of hydrogen sulphide separation from gas. A laboratory pressure system was designed to be used for testing with two membrane modules. The tests were carried out on a standard mixture with a concentration of 7.73% H2S in methane, at different permeate flow rates for feed for various membrane modules configurations. The tests were carried out in a one-module system and in two-module systems in a serial and cascade configuration. The concentrations and flows of intermediate and product streams were calculated and balanced, depending on the flow and stage cut. It was found, that the modules differ in their permeability and selectivity. The recycle of compressed parts of product streams at a concentration equal to the feed in the measurement conditions of the tested modules for the serial and cascade systems was simulated. Balance equations characteristic for individual modular systems were presented. Concentrations and flows of streams (intermediate and products) were calculated and balanced depending on the flow and partition coefficient. It was found that the tested modules displayed differences in their permeability and selectivity. The recycle of compressed parts of product streams at a concentration equal to the feed were simulated. Simulations were done for the measurement conditions of the tested modules and for the serial and cascade systems. In the serial configuration, for 60 bar inlet pressure, the value of partition coefficients Ѳ1 and Ѳ2 were 0.15 and 0.52 respectively. In the cascade configuration (inlet pressure for module 1st was 76 bar and for 2nd 16 bar) the partition coefficients were equal Ѳ1 = 0.11, Ѳ2 = 0.37. The degree of H2S removal from the feed gas stream in the serial system was higher (74%) than in the cascade system (25%). Methane loss in the serial system was 23%, and it was much higher than in the cascade system (2.2%). The developed method of simulations and forecasts based on experimental tests on CH4 – H2S mixtures membranes will enable obtaining data necessary for the practical application of membrane technology, including hybrid processes of natural gas desulfurization. The work showed the possibility of using membrane technology for natural gas desulfurization. The test results showed the possibility of significant changes in the composition of product streams the membrane separation process.
Źródło:
Nafta-Gaz; 2019, 75, 4; 222-229
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the absorbing pervaporation technique for ammonia recovery after the haber process
Autorzy:
Atlaskin, A.
Petukhov, A. N.
Yanbikov, N. R.
Salnikova, M.E.
Sergeeva, M. S.
Vorotyntsev, V. M.
Vorotyntsev, I. V.
Powiązania:
https://bibliotekanauki.pl/articles/184857.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas separation
absorbing pervaporation
ammonia
process intensification
membrane
separacja gazów
amoniak
intensyfikacja procesu
membrana
Opis:
A novel absorbing pervaporation hybrid technique has been evaluated experimentally for the recovery of ammonia from the gas mixture in a recycle loop of synthesis plants. This process of hybridization brings together the combination of energy-efficient membrane gas separation based on poly(dimethylsiloxane) poly(diphenylsilsesquioxane) with a high selective sorption technique where a water solution with polyethylene glycol 400 (PEG-400) was used as the liquid absorbent. Process efficiency was studied using the pure and mixed gases. The influence of PEG-400 content in aqueous solutions on process selectivity and separation efficiency was studied. The ammonia recovery efficiency evaluation of an absorbing pervaporation technique was performed and compared with the conventional membrane gas separation. It was shown that the absorbing pervaporation technique outperforms the conventional membrane method in the whole range of productivity, producing the ammonia with a purity of 99.93 vol.% using the PEG 80 wt.% solution. The proposed method may be considered as an attractive solution in the optimization of the Haber process.
Źródło:
Chemical and Process Engineering; 2018, 39, 3; 323--333
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania separacji CO2 na wybranych sorbentach metodą adsorpcji zmiennociśnieniowej PSA
Co2 separation research on selected sorbents by pressure swing adsorption method
Autorzy:
Wawrzyńczak, D.
Majchrzak-Kucęba, I.
Nowak, W.
Powiązania:
https://bibliotekanauki.pl/articles/402863.pdf
Data publikacji:
2010
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
adsorpcja zmiennociśnieniowa
PSA
dwutlenek węgla
separacja gazów
zeolit
pressure swing adsorption
carbon dioxide
gas separation
zeolite
Opis:
Przedstawiono rezultaty badań nad zastosowaniem wybranych sorbentów komercyjnych i syntezowanych z popiołów lotnych w adsorpcyjnej metodzie separacji dwutlenku węgla z gazów pochodzących ze spalania węgla w atmosferze wzbogaconej tlenem, jako jednej z metod wychwytywania CO2 po procesie spalania. Jako gaz surowy zastosowano symulowaną mieszaninę gazów spalinowych zawierających CO2, N2, O2, która podlegała rozdziałowi w dwukolumnowej instalacji adsorpcji zmiennociśnieniowej PSA. Proces prowadzono przy różnym ciśnieniu i przepływach gazu zasilającego oraz różnych udziałach strumienia gazu płuczącego. Dla wybranej konfiguracji procesu przedstawiono wyniki w postaci średniego stężenia dwutlenku węgla w produkcie niskociśnieniowym i odzysku CO2 z gazu surowego.
The paper presents the research results of applying selected commercial sorbents and synthesized from fly ash ones in adsorption method applying for carbon dioxide separation from flue gases emitted during coal burning, in oxygen-enriched atmosphere, as the one of the post-combustion CO2 capture methods. The feed gas is a simulated flue gas mixture containing: CO2, N2, O2 separated in two-bed pressure swing adsorption (PSA) installation. The process was carried out under different pressures and velocity of feed gas as well as different purge ratios. The results of average concentration of CO2 in low- pressure product and average recovery of CO2 from feed gas were presented for specific configuration of conducted process.
Źródło:
Budownictwo i Inżynieria Środowiska; 2010, 1, 1; 85-89
2081-3279
Pojawia się w:
Budownictwo i Inżynieria Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Membrany z polidimetylosiloksanów, polisiloksanouretanów i poli(tlenku fenylenu) do separacji gazów i perwaporacji
Preparation of poly(dimethylsiloxane), poly(siloxane-urethane) and poly(phenylene oxide) membranes for gas separation and pervaporation
Autorzy:
Capała, W.
Zielecka, M.
Bujnowska, E.
Kozakiewicz, J.
Trzaskowska, J.
Ofat-Kawalec, I.
Wielgosz, Z.
Kruzel, A.
Tomzik, S.
Powiązania:
https://bibliotekanauki.pl/articles/945858.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
polidimetylosiloksany
polisiloksanouretany
poli(tlenek fenylenu)
membrana
separacja gazów
perwaporacja
poly(dimethylsiloxane)s
poly(siloxane-urethane)s
poly(phenylene oxide)
membrane
gas separation
pervaporation
Opis:
Przedstawiono prace nad otrzymywaniem membran z polidimetylosiloksanów (PDMS), polisiloksanouretanów i poli(tlenku fenylenu) (PPO). W początkowej fazie prac formowano symetryczne membrany gęste, a na kolejnym etapie polimerowe warstwy aktywne formowano bezpośrednio na komercyjnym, porowatym podłożu ceramicznym lub polimerowym. Membrany testowano w procesie rozdziału modelowej mieszaniny gazowej o składzie 17 % CO2, 5 % O2 i 78 % N2 oraz w procesie perwaporacji próżniowej 5 i 10 % mas. wodnego roztworu acetonu (50 °C). W procesie separacji gazów z zastosowaniem membran z PDMS i z polisiloksanouretanów uzyskano permeaty zawierające 40–60 % CO2, w zależności od rodzaju membrany i warunków procesowych. W wypadku zastosowania membran z PPO stężenie CO2 w permeacie wynosiło 26–35 %. Permeaty w procesie perwaporacji zawierały 50–84 % mas. acetonu, a współczynnik separacji β wynosił 20–57, w zależności od membrany i stężenia nadawy.
Studies on the formation of poly(dimethylsiloxane) (PDMS), poly(siloxane-urethane) and poly(phenylene oxide) (PPO) membranes and their properties in gas separation and pervaporation have been presented. Dense symmetric membranes were initially formed in the early stages of the studies. In the next stage of the membrane development, active polymeric layers were cast directly on commercially obtained porous ceramic or polymer supports. The properties of the obtained membranes were then evaluated in the separation of amodel gaseous mixture comprising CO2 (17 %), O2 (5 %) and N2 (78 %) as well as in the vacuum pervaporation of aqueous solutions of acetone (5–10 wt %) at 50 °C. Depending on the type of membrane and process parameters, permeates containing 40–60 % CO2 were obtained with the application of PDMS and poly(siloxane-urethane) membranes. 26–35 % CO2 content was achieved in permeates in the case of PPO-derived membranes. The permeates obtained from pervaporation tests contained 50–84 wt % acetone, while the separation factor β was found to be between 20–57 depending on the type of membrane and the concentration of the feed.
Źródło:
Polimery; 2016, 61, 10; 693-701
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies reducing the H2S from natural gas of using polyimide membrane
Określenie możliwości separacji siarkowodoru ze strumienia gazów na membranach poliimidowych
Autorzy:
Janocha, A.
Wojtowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/1835249.pdf
Data publikacji:
2018
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
membrane modules
gas separation
polyimides
hydrogen sulphide
natural gas
moduły membranowe
separacja gazów
poliimidy
siarkowodór
gaz ziemny
Opis:
A laboratory pressure system with a membrane module was set up allowing to perform flow measurements and separation of gases and vapors. At the membrane polyimide module permeability test was conducted four mixes CH4–H2S concentrations ranging from 0.28% to 17.9% H2S, with different ratios of the permeate flow to the retentate inlet pressures in the range of 10÷96 bar. It has been found that with increasing H2S content in the inlet gas, methane losses decrease. Tests were carried out for different inlet gas flows at breakdown coefficients in the range of 0.08÷0.45.The study was conducted in a high pressure, aggressive environment for highly toxic gases. The article shows the possibility of changing the composition of product streams in the conducted membrane separation process. Three times the hydrogen sulfide content in the permeate was increased. The degree of H2S removal from the inlet gas was up to 90%. It has been found that membrane techniques can be successfully used in the preliminary stage of the natural gas sweetening process.
Zestawiono laboratoryjną instalację ciśnieniową z modułem membranowym pozwalającą wykonywać pomiary przepływu i separacji gazów i par. Na module z membranami poliimidowymi przeprowadzono badania przepuszczalności czterech mieszanek CH4–H2S o stężeniach od 0,28 % do 17,9% H2S, przy różnych stosunkach przepływu permeatu do retentatu dla ciśnień wlotowych w zakresie 10÷96 bar. Stwierdzono, że ze wzrostem zawartości H2S w gazie wlotowym, maleją straty metanu. Testy prowadzone były dla różnych przepływów gazu wlotowego przy współczynnikach podziału na strumienie w zakresie 0,08÷0,45. Badania prowadzono w wysokociśnieniowym, agresywnym środowisku dla gazów wysokotoksycznych. W artykule wykazano możliwość zmiany składu strumieni produktowych w prowadzonym procesie separacji membranowej. Uzyskano trzykrotny wzrost zawartości siarkowodoru w permeacie. Stopień usunięcia H2S z gazu wlotowego dochodził do 90%. Stwierdzono, że techniki membranowe mogą z powodzeniem być zastosowane we wstępnym etapie procesu odsiarczania gazu ziemnego.
Źródło:
Nafta-Gaz; 2018, 74, 7; 511-517
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regional features analysis of plugged holes of dense phase gas-solid separation fluidized bed
Autorzy:
Zhang, B.
Zhao, Y.
Luo, Z.
Song, S.
Duan, C.
Dong, L.
Powiązania:
https://bibliotekanauki.pl/articles/109699.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gas-solid fluidized bed for separation
pressure fluctuation
plugged holes regions
features analysis
plugged holes sensitivity
Opis:
In contrast to traditional coal separation, dry separation does not require water and does not cause water pollution. Dense phase gas–solid fluidized beds are used for dry separation. The plugged holes in the air distributor should be tested to ensure the stability of these beds for particle separation. The pressure fluctuation is sensitive to these plugged holes. This sensitivity can be tested and diagnosed by determining the standard deviation of the pressure fluctuation. In areas with partial blockage, that is the areas with weak fluidization, a decrease in the volume fraction of the particles and in the pressure differences in the transverse of the bed results in an increase of the standard deviation of the pressure fluctuation, thereby stimulating the lateral mixing of medium-sized particles. The standard deviation and the mixing intensity decrease axially. The value of sensitivity of the plugged holes in the air distributor decreases as the height of the bed increases. The features of air distributors affect the surrounding areas. The distribution law determining the influence of plugged holes on the beds is symmetrical. As the blockage of the fluidized bed distributor region increases, the mean square error of the pressure fluctuation in the related regions increases. The intensity of the effect is proportional to the distance to the plugged holes.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 667-679
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternative Solutions to Optimalisation of the Gassing-up Operation After Tanks Inerting Using Pressure Swing Adsorption (PSA) and Membrane Techniques
Alternatywne rozwiązania dla optymalizacji procesu zagazowania zbiorników ładunkowych po inertowaniu w odniesieniu do PSA (Pressure Swing Adsorption) i technologii membranowej
Autorzy:
Wieczorek, A.
Powiązania:
https://bibliotekanauki.pl/articles/342015.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydawnictwo Uniwersytetu Morskiego w Gdyni
Tematy:
gas separation
pressure swing adsorption
membrane technology
nitrogenethylene composition
separacja gazów
technologia membranowa
mieszanina azot-etylen
Opis:
The article constitutes the introduction to finding a solution to a problem concerning carrying gassing-up operation in a more efficient way in terms of loosing ethylene cargo. To begin with, the impact of nitrogen presence on ethylene cascade cycle’s technical work and cooling capacity has been described. Further, the results of investigation into methods of nitrogen removing from cargo tanks after gassing-up have been presented. Possibility of pressure swing adsorption (PSA) and membrane techniques use has been analyzed with reference to ethylene carriers.
Artykuł stanowi wprowadzenie do rozwiązania problemu przeprowadzenia operacji gassing-up w sposób bardziej efektywny w odniesieniu do znacznych ilości „traconego” ładunku. W pierwszej kolejności opisano wpływ obecności azotu na pracę obiegu. W dalszej części przeanalizowano dostępne metody usunięcia azotu podczas operacji gassing-up. Opisano metody PSA (Pressure Swing Adsorption) oraz membrany i przeanalizowano je w odniesieniu do etylenowców.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Gdyni; 2018, 105; 136-144
1644-1818
2451-2486
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Gdyni
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study of the membrane contactor systems for gas dehumidification
Autorzy:
Usachov, V.
Laguntsov, N.
Okunev, A.
Teplyakov, V.
Glukhov, S.
Powiązania:
https://bibliotekanauki.pl/articles/346999.pdf
Data publikacji:
2003
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydział Technologii i Inżynierii Chemicznej
Tematy:
gas/vapour separation
dehumidification
polymeric membranes
membrane absorption
membrane contactor
Opis:
The paper presents a pilot active membrane contactor system (AMCS) description and experimental results for air dehumidification. Triethyleneglycol was used as a hygroscopic liquid carrier. Polydimethylsiloxane based membranes (Lestosil) were used in a spiral wound membrane contactor. The experiments with AMCS demonstrated effective air-drying under a high ratio-feed gas flux/liquid carrier flux (10²-10³). The developed contactor system allows to achieve air dehumidification up to Tdew point= –20 °C.
Źródło:
Ars Separatoria Acta; 2003, 2; 36-46
1731-6340
Pojawia się w:
Ars Separatoria Acta
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozdział mieszanin gazowych przy wykorzystaniu ciekłych membran na podłożu ceramicznym impregnowanym cieczą jonową
Gas mixture separation on ceramic membranes impregnated with ionic liquid
Autorzy:
Rotkegel, Adam
Ziobrowski, Zenon
Powiązania:
https://bibliotekanauki.pl/articles/306026.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Inżynierii Chemicznej PAN
Tematy:
absorpcja
ditlenek węgla
ciecze jonowe
absorption
carbon dioxide
ionic liquids
Opis:
W pracy przedstawiono wyniki badań separacji ditlenku węgla i azotu na ceramicznych membranach ciekłych impregnowanych cieczą jonową [Emim][Ac] ] (octan 1-etylo-3-metyloimidazolowy). Badania przeprowadzono dla membrany ceramicznej firmy Pervatech BV w temperaturach 20-60°C dla ciśnień 1- 7 bar. Ciecz jonową nanoszono metodą pokrywania oraz zanurzania. Stwierdzono, że otrzymane membrany SILMs charakteryzują się niewielkimi strumieniami masowymi oraz dużymi wartościami selektywności.
The experimental results of carbon dioxide and nitrogen separation on ceramic membranes impregnated with ionic liquid [Emim][Ac] (1-ethyl-3-methylimidazolium acetate) are presented. Ceramic membranes made by Pervatech BV were investigated in 20-60°C and in the pressure range 1-7 bar. The ionic liquid was introduced into ceramic support by coating and soaking. It was found, that prepared SILMs are characterized by small mass fluxes and high selectivities.
Źródło:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk; 2019, 23; 55-67
1509-0760
Pojawia się w:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical model of gas-liquid-sand mixture separation in the four-phase separator of inertial type for subsea application
Autorzy:
Kopey, B. V.
Kryvonozhko, T. A.
Liakh, M. M.
Yuriev, E. V.
Powiązania:
https://bibliotekanauki.pl/articles/299239.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
separator
four-phase
efficiency
subsea
oil
gas
water
sand
Opis:
In this article the construction and mathematical model of four-phase separator is realized, which is based on inertial separation mechanism of gas-liquid-sand mixture. Also we have put the problem on the basis of this model to obtain the dependence of separator efficiency on the parameters which play a crucial role in the technological process of separating gas-oil-water-sand mixture into a solid, liquid and a gas phase.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 2; 361-377
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free surface of the liquid-gas phase separation as a measuring membrane of a device for measuring small hydrostatic pressure difference values
Powierzchnia swobodna rozdziału faz ciecz-gaz jako membrana pomiarowa urządzenia do pomiaru małych wartości różnicy ciśnienia hydrostatycznego
Autorzy:
Filipek, W.
Broda, K.
Branny, M.
Powiązania:
https://bibliotekanauki.pl/articles/219111.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
small values of differential pressure measurement
filtration
pressure gauges
małe wartości różnicy ciśnień
pomiary
filtracja
manometry
Opis:
To obtain a correct reading of fluid flow through a porous medium, it is necessary to know the pressure distribution. While in the case of large Reynolds numbers (turbulent flows) finding pressure measurement devices on the market is not a major problem, there are currently no available devices with sufficient accuracy for measurement of laminar flows (i.e. for Re numbers (Bear, 1988; Duckworth, 1983; Troskolański, 1957) in the range from 0.01 to 3). The reasons of this situation has been discussed in a previous articles (Broda & Filipek, 2012, 2013). Therefore, most of the work on this issue relates to testing velocity distribution of the filter medium (Bear, 1988) or pressure distribution at high hydraulic gradient levels (Trzaska & Broda, 1991, 2000; Trzaska et al., 2005). The so-called measurements of the lower limit of the applicability of Darcy’s law for liquid, as well as determining a threshold hydraulic gradient J0 (Bear, 1988) tend to cause especially great difficulty. Such measurements would be particularly important application in determining the infiltration of water into the mine workings, filtering through the foundations of buildings, etc. For several years, the authors (Broda & Filipek, 2012, 2013) have been engaged in the development of methods and measuring instruments (patent applications: P.407 380 and P.407 381), which Gould allow for measurement of hydrostatic pressure (differences) below 1 Pa. In the course of research, a New concept of methodology for measuring low values of hydrostatic pressure differences was developed, which is the subject of this article. This article seeks to introduce a new concept of using the free surface of liquid-gas separation as the measuring membrane of a device used in measurement of small values of hydrostatic pressure. The fokus is mainly on the possibility of building such a device – describing the technical difficulties that occurred during the execution of the idea. Consequently, less attention was paid to the broader considerations related to uncertainty of the proposed method’s measurements, due to the authors’ awareness that this is the first prototype of such a device and, on the basis of this experience, another one will be built and tested. The observations and numerical analysis of the image formed on the screen by the passage of a laser beam through the free surface of the liquid-gas separation show that at low values of pressure difference, the bubble acts as a membrane shifting in the direction of lower pressure, in such way that the displacement is proportional to the pressure difference at both ends of the bubble. The proprietary method of numerical data processing presented in this article, based on analysis of the intensity of color change in a frame moving along a selected line outside of visual changes in the image ofthe laser beam after passing through the test structure, provided a tool to create first mathematical models to describe the observed changes (2),(3). Presented in this article method of measuring the difference between the free surface levels in two containers, and hence the measurement of hydrostatic pressure difference provides a new tool for laboratory measurements in the fields of science, which were previously unattainable.
Do poprawnego opisu przepływu płynu przez ośrodek porowaty niezbędna jest znajomość rozkładu ciśnienia. O ile dla dużych liczb Reynoldsa (przepływy turbulentne) pomiar ciśnienia dostępnymi na rynku przyrządami nie stanowi większego problemu, to dla przepływów laminarnych cieczy (tj. dla liczb Re (Bear, 1988; Duckworth, 1983; Troskolański, 1957) z zakresu 0.01 do 3) nie ma na rynku przyrządów o wystarczającej dokładności. Przyczyny powodujące taką sytuację zostały omówione w poprzednich opracowaniach (Broda i Filipek, 2012, 2013), Dlatego większość prac dotyczących tego zagadnienia dotyczy badań rozkładu prędkości medium filtrującego przez badany ośrodek (Bear, 1988) lub rozkładu ciśnienia przy wysokich spadkach hydraulicznych (Trzaska i Broda, 1991, 2000; Trzaska i in., 2005). Zwłaszcza pomiary w zakresie tzw. dolnej granicy stosowalności prawa Darcy’ego dla cieczy oraz dotyczące określenia progowego spadku hydraulicznego J0 (Bear, 1988) sprawiają wielkie trudności. Pomiary takie miałyby duże znaczenie aplikacyjne zwłaszcza przy określaniu infiltracji wody do wyrobisk górniczych, filtracji przez fundamenty budowli itp. Autorzy od kilku lat (Broda i Filipek, 2012, 2013) zajmują się opracowaniem metody oraz przyrządu pomiarowego (wnioski patentowe: P.407 380 i P.407 381) pozwalających na pomiary wartości ciśnienia (różnicy ciśnienia) hydrostatycznego poniżej 1 Pa. W tym okresie opracowali nową metodę pomiaru, skonstruowali stanowisko badawcze i przeprowadzili pomiary różnicy ciśnień hydrostatycznych z dokładnością do 0.5 Pa znacznie ograniczając zjawisko histerezy (Broda i Filipek, 2012) (wniosek patentowy: P.407 380). W oparciu o zdobyte doświadczenie prace kontynuowano opracowując metodę pomiaru i budując nowe stanowisko do pomiaru bardzo małych różnic ciśnień z kompensacją wpływu ciśnienia atmosferycznego o dużo prostszej budowie, co znacząco zwiększyło dokładność i wiarygodność pomiarów (Broda i Filipek, 2013) (wniosek patentowy: P. 407 381). W trakcie prac badawczych narodziła się nowa koncepcja metodologii pomiaru niskich wartości różnicy ciśnienia hydrostatycznego, która jest przedmiotem niniejszego artykułu. Na rysunku 1 przedstawiono zdjęcie stanowiska pomiarowego służącego do określenia wpływu zmiany wartości różnicy ciśnienia hydrostatycznego na kształt a co za tym idzie przemieszczenie powierzchni swobodnej rozdziału faz ciecz-gaz, oraz omówiono jego budowę zwracając uwagę na istotne szczegóły konstrukcyjne. Przedstawiono także sposób kalibrowania przyrządu, wykonywania i obróbki zdjęć fotograficznych w celach pomiarowych z wykorzystaniem napisanego w języku Delphi autorskiego programu do obróbki numerycznej zdjęć. Występujące trudności ilustruje rysunek 2 przedstawiający przesunięcie linii odniesienia w trzech kolejno po sobie wykonanych zdjęciach. Następnie omówiono sposób przygotowania stanowiska do pomiarów oraz sposób ich przeprowadzania czego ilustracją są rysunki 3 i 4. Przedstawiono występujące problemy oraz zastosowane sposoby ich rozwiązania. Zarejestrowany przykładowy obraz po przejściu promienia lasera przez badaną strukturę dla wybranych wartości różnicy ciśnień hydrostatycznych uzyskany za pomocą kulek ceramicznych przedstawiono na rysunku 5. Rysunek 6 wyjaśnia metodę obróbki numerycznej zdjęć w oparciu o autorski program i zależności (1),(2),(3). Na rysunkach 7 i 9 zestawiono otrzymane krzywe zmienności intensywności barw uzyskane w trakcie opracowania numerycznego. Zwrócono także uwagę na rozkład zmian intensywności barw dla różnicy między powierzchniami swobodnymi cieczy w cylindrach (Rys. 8-11) dla wybranych serii pomiarowych. W dalszej części artykułu dokonano analizy otrzymanych obrazów zwracając uwagę na włączenie metody transformacji Fouriera lub „Falkowej” (Ziółko, 2000) do numerycznej analizy posiadanych danych (Rys. 12-14). Na rysunku 12 pokazano wybrane trzy zależności opisujące zmienność natężania barwy w funkcji położenia ramki (1), dla których dokonano transformacji Fouriera według zależności (3). Analizy dokonano metodą arytmetyczna Perry’ego (Ziółko, 2000) w okienku o szerokości n = 2300 przyjmując jako położenie startowe wartość x = 1600. Rysunek 13 przedstawia wartości współczynnika Ak a rys.14 przedstawia wartości kąta przesunięcia jk dla pierwszych 58 harmonicznych. Prace nad udoskonaleniem metody trwają. W dalszej części artykułu autorzy podsumowują osiągnięte wyniki zwracając uwagę na uzyskaną precyzję pomiarów oraz korzystne zastosowanie powierzchni swobodnej rozdziału faz ciecz-gaz jako membrany pomiarowej urządzenia do pomiaru małych wartości różnicy ciśnienia hydrostatycznego (Rys. 15-16) sugerując wprowadzenie do analizy trzeciego wymiaru co wiąże się z koniecznością kosztownej modernizacji stanowiska pomiarowego.
Źródło:
Archives of Mining Sciences; 2015, 60, 1; 341-358
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separacja pęcherzy gazowych z substancji plastycznolepkich za pomocą wirówki
Separation of gas bubbles from viscoplastic substances by the use of centrifuge
Autorzy:
Kiljański, T.
Powiązania:
https://bibliotekanauki.pl/articles/2070435.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pęcherze gazowe
płyn plastycznolepki
wirówka
separacja
gas bubbles
viscoplastic fluid
centrifuge
separation
Opis:
Dokonano analizy zachowania pęcherza gazowego w płynie plastycz-nolepkim podczas odwirowania w wirówce oraz warunków niezbędnych, aby pęcherz mógł się poruszać i mógł zostać usunięty z płynu. Przedstawiono metodę obliczenia parametrów procesu separacji - rozmiaru najmniejszych pęcherzy możliwych do usunięcia w danych warunkach lub minimalnej szybkości obrotowej potrzebnej do usunięcia pęcherza o danych rozmiarach.
The analysis of gas bubble behaviour in viscoplastic fluid during its centrifugation in the centrifuge and conditions necessary for a bubble to move inside and be removed from fluid was performed. A method for the calculation of separation process parameters, i.e. a minimal size of bubbles possible to be removed in given conditions or the minimal rotational frequency necessary for the removal of a bubble of certain sizes is presented.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 3; 146-149
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Outline of CHN Elementary and CN Environmental Analysis
Autorzy:
Kudzin, Zbigniew H
Waśkowski, Bogdan
Powiązania:
https://bibliotekanauki.pl/articles/896197.pdf
Data publikacji:
2004
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
elementary analysis
simultaneous CH and CHN determinations
high temperature combustion
low temperature combustion
combustion products
gas chromatographic separation
thermal conductivity detection
infra-red detection
chemiluminiscence detection
microcoulometric detection
elemental analyzers
environmental analysis
Opis:
Wydrukowano z dostarczonych Wydawnictwu UŁ gotowych materiałów
A review on the CHN analysis of organic compounds and the CN environmental analysis is described. The review contains outline of the evolutionary development of elementary analysis, since Gay-Lussac, Dumas and Liebig era until a present slate analysis, with computer controlled, fully automated analyzers. Physical principles of high temperature and low temperature combustions are discussed. Technical foundations on conjunctions of the high temperature combustion with chromatographic separations of the ultimate combustion products of organic samples, is delineated. Commercially available elemental analyzers are compared and their construction and operating principles are described. The basic methods of determination of environmental carbon and nitrogen are discussed. The representative analyzers for environmental carbon and nitrogen analysis are presented and their operating principles are described.
Źródło:
Acta Universitatis Lodziensis. Folia Chimica; 2004, 13
0208-6182
Pojawia się w:
Acta Universitatis Lodziensis. Folia Chimica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie chromatografii gazowej do rozdzielania i oznaczania wybranych estrogenów w próbkach środowiskowych
Application of gas chromatography for separation and determination of selected estrogenic compounds in the environmental samples
Autorzy:
Kumirska, J.
Potrykus, M.
Migowska, N.
Mulkiewicz, E.
Powiązania:
https://bibliotekanauki.pl/articles/92246.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
związki estrogenowe
matryce środowiskowe
chromatografia gazowa
spektrometria mas
przygotowanie próbki
estrogenic compounds
environmental matrices
gas chromatography
mass spectrometry
sample preparation
Opis:
Estrogeny to związki hormonalne, których obecność w środowisku - nawet w bardzo niskich stężeniach (poniżej 1 ng/L) - może wywierać negatywny wpływ na reprodukcje i rozwój organizmów żywych. Opracowywanie odpowiednio czułych metodyk przygotowania próbki, rozdzielania i oznaczania tych związków w próbkach środowiskowych stało się zatem jednym z ważniejszych zadań z zakresu chemii analitycznej oraz ochrony środowiska. W pracy przedstawiono przegląd metodyk przygotowania próbki, rozdzielania i oznaczania wybranych substancji estrogenowych (estronu, 17β-estradiolu, estriolu, 17α-etynyloestradiolu, dietylostilbe-strolu) w różnych komponentach środowiska techniką GC-MS (ang. gas chromatography co-upled with mass spectrometry).
Estrogens are hormonal active compounds, which presence in the environment - also in very low concentrations (less than 1 ng/L) – could have a negative influence on reproduction and growth of the living organisms. Development of the sensitive methods for determination of these compounds in the environmental samples has been found as one of the most important tasks of analytical chemistry and environmental protection. In this work, a review of methods for determination of selected estrogenic compounds (estrone, 17β-estradiol, estriol, 17α-ethinyle-stradiol and diethylstilbestrol) in environmental compartments using GC-MS (ang. gas chroma-tography coupled with mass spectrometry) technique is presented.
Źródło:
Camera Separatoria; 2012, 4, 1; 7-36
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wydzielanie CO2 z gazów przy zastosowaniu membran dyfuzyjno-rozpuszczalnościowych (PDMS)
CO2 separation form gas mixture using solution-diffusion membranes (PDMS)
Autorzy:
Janusz-Cygan, A.
Warmuziński, K.
Jaschik, M.
Tańczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/2073411.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
współczynnik permeacji
współczynnik separacji
PDMS
wydzielanie CO2/N2
permeability coefficient
separation factor
CO2/N2
Opis:
Przeprowadzono badania eksperymentalne rozdziału mieszanin CO2/N22/N2
Experimental tests of 2/N2
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 4; 26-27
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isolation of volatiles from packaging materials and their separation with gas chromatography
Wyodrębnianie lotnych składników materiałów opakowaniowych i ich rozdział za pomocą chromatografii gazowej
Autorzy:
Kamiński, E.
Wąsowicz, E.
Przybylski, R.
Szebiotko, A.
Zawirska, R.
Powiązania:
https://bibliotekanauki.pl/articles/1398345.pdf
Data publikacji:
1980
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
packaging materials
head space method
gas chromatography distillatlon-extraction methods
Opis:
Isolation of volatiles from packaging materials was carried out with the head space and distillation-extraction methods. Separation of the volatile components was performed in a gas chromatograph.
W pracy sprawdzono przydatność stosowania metody „head space", zagęszczania na adsorbentach oraz metody destylacyjno-ekstrakcyjnej do wyodrębniania lotnych składników opakowań w celu ich analizy metodą chromatografii gazowej. Metoda „head space" pozwala na analizę bardzo lotnych składników opakowań występujących w dużych stężeniach. Koncentracja związków lotnych na polimerze Chromosorb 106 pozwala na zagęszczanie niektórych składników kilkaset razy w stosunku do próby wyjściowej. Metoda destylacyjne-ekstrakcyjna daje możność wyodrębniania z opakowań największej ilości lotnych składników. Stężenie wyodrębnionych składników metodą destylacyjne-ekstrakcyjną jest wystarczające do oceny węchowej eluowanych składników z kolumny chromatograficznej oraz do ich identyfikacji metodami spektroskopowymi.
Źródło:
Acta Alimentaria Polonica; 1980, 06, 3; 173-181
0137-1495
Pojawia się w:
Acta Alimentaria Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozdział mieszanin gazowych przy wykorzystaniu ciekłych membran na podłożu ceramicznym impregnowanym cieczami jonowymi
Separation of gas mixture on ionic liquid membranes with ceramic support
Autorzy:
Rotkegel, A.
Ziobrowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/306117.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Inżynierii Chemicznej PAN
Tematy:
usuwanie CO2
membrana SILM
ciecze jonowe
CO2 removal
SILM Membrane
ionic liquids
Opis:
W pracy przedstawiono przegląd prac dotyczących rozdziału mieszanin gazowych, a w szczególności wydzielania CO2 z gazów, przy wykorzystaniu ciekłych membran na podłożu ceramicznym impregnowanym cieczami jonowymi (SILM). Omówiono rodzaje podłoża ceramicznego stosowanego w membranach SILM, a także wpływ struktury podłoża na jakość membrany. Pokazano stosowane sposoby nanoszenia (impregnacji) cieczy jonowej na podłoże ceramiczne.
The paper presents the review of works concerning gas mixture separation, in particular a CO2 removal from gases, using liquid membrane on ceramic support impregnated with ionic liquids (SILM). The type of ceramic support used in SILM membranes, as well as the influence of the support structure on the quality of the membrane was discussed. The methods used to impregnate the ionic liquid into the ceramic support were shown.
Źródło:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk; 2017, 21; 65-79
1509-0760
Pojawia się w:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie dwukolumnowej adsorpcyjnej chromatografii gazowej do rozdzielania i oznaczania gazów powstających podczas fermentacyjnego wytwarzania bio-wodoru
Application of dual-column gas chromatography for separation and determination of gas mixtures formed during fermentative bio-hydrogen formation processes
Autorzy:
Rybarczyk, P.
Makoś, P.
Kamiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/92382.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
procesy fermentacyjne
otrzymywanie biopaliw gazowych lub ciekłych
biowodór
analityka techniczna procesowa
skład fazy gazowej
adsorpcyjna chromatografia gazowa
fermentative processes
generation of gaseous or liquid biofuels
biohydrogen
technical process analytics
gas phase composition
adsorption gas chromatography
Opis:
Bio-wodór może być otrzymywany m.in. w wyniku przetwarzania biomasy ligno-celulozowej (BMLC) w procesach fermentacji ciemnej, realizowanej w atmosferze beztlenowej, lub o niskiej zawartości tlenu, najczęściej w atmosferze azotu. Ważne znaczenie w badaniach optymalizacji warunków ciemnej fermentacji ma analityka składu powstających w procesie mieszanin gazów, które - poza wodorem, zawierają głównie: CO2, CH4 oraz niewielkie stężenia O2. Wyniki wcześniejszych naszych badań pokazują, że z wykorzystaniem długiej (6.5 m) kolumny pakowanej adsorbentem Porapak Q o ziarnach wypełnienia 100 – 120 MESH, przy zastosowaniu azotu jako gazu nośnego, możliwe jest rozdzielenie w warunkach izotermicznych oraz oznaczenie w/w składników mieszanin gazowych z wykorzystaniem detektora cieplno-przewodnościowego (TCD), przy czasie analizy ok. 10 minut. W niniejszej pracy przedstawiono układ aparatu, porównawcze wyniki rozdzielania oraz korzystną metodykę analityczną oznaczania w/w składników gazowych z zastosowaniem dwóch równolegle usytuowanych i stosowanych naprzemiennie kolumn pakowanych, jednej z polimerowym adsorbentem typu Porapak Q oraz drugiej z sitem molekularnym 5 A. Porównano zastosowanie azotu albo helu jako gazu nośnego. Zastosowano dwa szeregowo połączone detektory – detektor cieplno-przewodnościowy o średniej czułości oraz detektor płomieniowo-jonizacyjny (FID), charakteryzujący się niskim progiem wykrywalności i możliwością oznaczania śladowych zawartości lotnych węglowodorów i innych lotnych organicznych składników obecnych w gazie fermentacyjnym, także innego typu niż pochodzącym z fermentacji ciemnej. Studia i badania tej pracy doprowadziły do wniosków, dotyczących korzystnych zasad postępowania w zakresie analityki mieszanin gazowych z fermentacji ciemnej i innego rodzaju fermentacji, zarówno w zakresie w/w głównych składników mieszanin gazowych obecnych w gazach fermentacyjnych, jak i w zakresie badania śladowych zawartości w gazach fermentacyjnych takich składników, jak CO, COS, NH3, PH3, SO2 oraz różnych lotnych związków organicznych, obecnych nad płynną powierzchnią w bioreaktorze fermentacji.
Bio-hydrogen can be obtained e.g. as a result of processing of ligno-cellulosic biomass (BMLC) in so-called dark fermentation, carried out in an anaerobic atmosphere or with low oxygen content, most often in a nitrogen atmosphere. The analytical composition of the gas mixtures formed in the process, H2, CO2, CH4 and low concentrations of O2 is extremely important in the perspective of the dark fermentation optimization. Our previous research results show that using a column packed with Porapak Q adsorbent with packing grains of 100 - 120 MESH and using nitrogen as the carrier gas, it is possible to fully separate under isothermal conditions and determine the components of the gas mixtures tested using a thermal conductivity detector (TCD) with an analysis time of about 10 minutes. This work presents the apparatus layout, comparative separation results and a favorable analytical methodology for determining the aforementioned gaseous components using two packed columns arranged in parallel and used alternately, one with a Porapak Q type polymer adsorbent and the other with granular zeolite, the so-called 5 A molecular sieve. The use of nitrogen or helium as a carrier gas was compared. Two detectors connected in series were used - a universal thermal conductivity detector of medium sensitivity and a flame ionization detector (FID), enabling highly sensitive detection and trace determination content of volatile hydrocarbons and other volatile organic components present in the fermentation gas, also other than those originated during the dark fermentation. The presented studies and research of this work have led to conclusions regarding favorable rules of conducting the analysis of gas mixtures from dark fermentation and other types of fermentation, both in terms of the above-mentioned main components of gas mixtures present in fermentation gases, as well as in the field of testing trace content in fermentation gases with emphasis on CO, COS, NH3, PH3, SO2 and various volatile organic compounds found above the liquid surface in the fermentation bioreactor.
Źródło:
Camera Separatoria; 2018, 10, 2; 105-114
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie chromatografii gazowej do rozdzielania i oznaczania lotnych związków azoto-organicznych (LZN) w próbkach wody i ścieków
Application of gas chromatography for separation and guantification of Volatile Nitrogen-containing Compounds (VNCs) in samples of water and wastewater
Autorzy:
Makoś, P.
Boczkaj, G.
Powiązania:
https://bibliotekanauki.pl/articles/92334.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
Lotne związki azoto-organiczne
LZN
woda
ścieki
chromatografia gazowa
detektory uniwersalne
detektory selektywne
Volatile Nitrogen-containing Compounds
VNCs
water
wastewater
gas chromatography
universal detectors
selective detectors
Opis:
W pracy dokonano przeglądu i porównania metod opartych na chromatografii gazowej do oznaczania lotnych związków azoto-organicznych (LZN) w próbkach wody i ścieków. Przedstawione zostały metodyki analityczne wykorzystujące zarówno detektory selektywne tj. detektor azotowo-fosforowy (NPD), detektor powierzchniowej jonizacji (SID), detektor chemiluminescencyjny azotu (CLND), detektor wychwytu elektronów (ECD) jak i detektorów uniwersalnych typu spektrometr mas (MS), tandemowy spektrometr mas (MS/MS) oraz detektor płomieniowo jonizacyjny (FID). Ze względu na wysoką toksyczność oraz negatywne oddziaływanie LZN na środowisko, konieczne staje się opracowanie nowych metod analitycznych, które umożliwią oznaczenie związków na niskich poziomach stężeń. Spośród dostępnych metod największą popularnością i największym potencjałem do różnorodnych zastosowań jest chromatografia gazowa sprzężona ze spektrometrią mas, ponieważ w połączeniu z odpowiednią techniką izolacji lub/i wzbogacania analitów, zapewnia niskie granice wykrywalności względem większości związków z grupy LZN. Pozostałe detektory wykazują wysoką selektywność dla mniejszej liczby związków LZN.
The paper presents a review and comparison of gas chromatographic methods for determination of Volatile Nitrogen-containing Compounds (VNCs) in samples of water and wastewater. The analytical methods that uses both selective detectors such as Nitrogen-Phosphorus Detector (NPD), Surface lonization Detector (SID), Nitrogen Chemiluminescence Detector (CLND), Electron Capture Detector (ECD) and universal detectors: Mass Spectrometry (MS), Tandem Mass Spectrometry (MS/MS) and Flame lonization Detector (FID) were described. Due to the high toxicity and negative effects of VNCs on the environment, it becomes necessary to develop new analytical methods that allow determination of compounds ar Iow concentration level. Among all available methods, the most popular and the greatest potential for a variety of applications have gas chromatography coupled with mass spectrometry, because in combination with techniques of isolation and / or enrichment of the analytes, provide Iow limits of detection for most VNCs. Other detectors have a high selectMty for a smaller number of VNCs compounds.
Źródło:
Camera Separatoria; 2014, 6, 2; 73-86
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza symulacyjna pracy jednostki adsorpcyjnej PTSA do wychwytywania dwutlenku węgla ze spalin kotłowych
Simulation analysis of work of PTSA adsorption unit for carbon dioxide separation from flue gas
Autorzy:
Baka, B
Sztekler, K
Klajny, R
Powiązania:
https://bibliotekanauki.pl/articles/297104.pdf
Data publikacji:
2013
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
adsorpcja
jednostka PTSA
separacja CO2
modelowanie procesowe
adsorption
PTSA unit
CO2 separation
process modeling
Opis:
W prezentowanej pracy została przedstawiona technologia separacji dwutlenku węgla ze spalin kotłowych wykorzystująca proces adsorpcji bazujący na zdolności sorbentu do selektywnego pochłaniania składników mieszanin gazowych. Technologia ta, zwana postcombustion, jest połączeniem metody adsorpcji zmiennociśnieniowej i zmiennotemperaturowej (metoda PTSA) i stanowi elastyczną technikę, mogącą znaleźć zastosowanie w istniejących już blokach energetycznych. Jednostka PTSA do wychwytu CO2 została opracowana jako model matematyczny przy wykorzystaniu oprogramowania IPSE-pro firmy SimTech, który to model umożliwił przeprowadzenie symulacji numerycznych. Celem wykonanych obliczeń symulacyjnych było określenie warunków pracy układu PTSA, w szczególności określono wpływ temperatury i ciśnienia spalin na proces adsorpcji, wpływ ciśnienia desorpcji na zapotrzebowanie na sorbent, a także wpływ parametrów czynnika grzejnego na proces desorpcji oraz ustalono optymalne parametry pracy układu separacji.
This paper presents one of the post-combustion methods of capturing carbon dioxide. The basics of adsorption process are shown, and the adsorption model PTSA is presented. The PTSA model is a combination of two different methods of separation: Pressure Swing Adsorption (PSA) and Temperature Swing Adsorption (TSA). The standard library from IPSE-pro software does not include a model for the separation unit, therefore is why a mathematical model was developed and imported to the IPSE-pro. Carried out simulations are designed to analyze the work conditions of the PTSA. This study focuses on three effects: the temperature and gas pressure effect on the process of adsorption, desorption pressure effect on the demand for sorbent and the parameters of a heating medium effect on the desorption process. Justified values of parameters of the separation units are defined. Experimental work is conducted by using synthetic 5A zeolite. The adsorption process in the PTSA system is operated with temperature and pressure corresponding to the temperature and pressure of the flue gas, which is introduced to capture units. In the first stage of the simulation, tests are conducted. The tests are to determine the parameters of flue gas, which allows reducing requirements on the sorbent and reducing the energy required to regenerate the sorbent. After the adsorption process, sorbent along with adsorbed CO2 is subjected to the regeneration process, in which carbon dioxide is released from the surface and pores of the sorbent. Regeneration of the sorbent allows restoring the original sorption properties of the sorbent and thus it can be used in subsequent cycles. The temperature, in which the desorption process takes place has a significant meaning and the heat source can be derived from a steam turbine. The next stage of this study is to examine the effect of pressure and temperature of the heating steam on the demand for the sorbent and desorption heat. Extraction steam is used to carry out the regeneration of sorbent.
Źródło:
Inżynieria i Ochrona Środowiska; 2013, 16, 1; 141-152
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Suszenie Parą w Złożu Fluidalnym pod Ciśnieniem (SPZFC) i oddzielanie dwutlenku węgla przez płuczkę gazową - nowe wyzwanie dla wytwarzania energii elektrycznej z węgla brunatnego
Pressurized Steam Fluidized Bed Drying (PSFBD) and carbon dioxide separation by flue gas scrubbing - new challenges for the lignite power industry
Autorzy:
Lechner, S.
Rombrecht, H.-B.
Krautz, H. J.
Powiązania:
https://bibliotekanauki.pl/articles/348991.pdf
Data publikacji:
2011
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
płuczka CO2
węgiel brunatny
suszenie
złoże fluidalne
elektrownia
lignite
drying
fluidized bed
carbon dioxide scrubbing
power plant
Opis:
Ochrona klimatu wymaga oddzielania i usuwania dwutlenku węgla pochodzącego ze spalin elektrowni opalanych węglem brunatnym. Jedną z możliwości osiągnięcia tego celu jest płukanie spalin. Proces ten wymaga dużo energii i pary o ciśnieniu około 4 bar. Jedną z możliwości obniżenia emisji dwutlenku węgla i powiększenia sprawności elektrowni jest wstępne suszenie węgla brunatnego. Aktualne badania dotyczą Suszenia Parą w Złożu Fluidalnym pod Ciśnieniem (SPZFC). Wzrost ciśnienia zmniejsza rozmiar suszarki, a para pochodząca z węgla brunatnego jest odprowadzana w obszarze temperatury od 140 do 160 stopni Celsjusza. Zadaniem pozostaje jeszcze włączenie tego ciepła do procesu. Poprzez połączenie suszenia i płukania spalin całe ciepło suszenia może być podane do płuczki spalin, gdzie pokryje około 40% popytu ciepła desorpcji. W ten sposób potrzebna ilość ciepła, pobrana z turbiny średnioprężnej zostaje wyraźnie zredukowana na rzecz optymalizacji sprawności bloku elektrowni. Artykuł przedstawia najpierw pogląd na temat stanu badań SPZFC, omawia stan aktualny technologii płuczkowej CO2 i w końcu dyskutuje sposoby wykorzystania ciepła suszarki w urządzeniu desorpcyjnym oczyszczania gazów spalinowych.
The protection of the climate requires the separation and discharge of carbon dioxide proceeding from lignite fired power plants. One measure to achieve this objective is the scrubbing of the flue gas. This process demands a high energy input in form of heating steam of a pressure of ca. 4 bar. A further measure to decrease the carbon dioxide emissions and increase the profitability of the power plant is the predrying of the lignite. A recent process is the Pressurized Steam Fluidized Bed Drying (PSFBD). Due to the high pressure the equipment is smaller than in atmospheric dryers and the steam coming from lignite water has a temperature range between 140 and 160 degrees of Celsius. The integration of this heat in the power plant process is a task still to solve. The combination of drying and gas scrubbing allows the use of the entire heat coming from the dryer in the gas scrubber where nearly 40% of the heat demand in the desorber can be substituted. By this means the necessary heat which has to be got after the intermediate steam turbine is significantly reduced. The overall power plant efficiency rises. The paper gives an overview about the state of the PSFBD-research and discusses possibilities of the use of the this heat in the desorber of a flue gas scrubber.
Źródło:
Górnictwo i Geoinżynieria; 2011, 35, 3; 203-215
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separacja membranowa gazów procesowych
Membrane separation of process gases
Autorzy:
Białecka, B.
Nowak, D.
Powiązania:
https://bibliotekanauki.pl/articles/340993.pdf
Data publikacji:
2006
Wydawca:
Główny Instytut Górnictwa
Tematy:
gaz procesowy
separacja membranowa
wzbogacanie gazów
process gas
membrane separation
gas upgrading
Opis:
W artykule przedstawiono wyniki badań nad wzbogacaniem gazów procesowych w wodór na module membranowym wyprodukowanym przez firmę UBE. Badano wpływ warunków procesowych na skład chemiczny produktów: permeatu i retentatu. Proces prowadzono w współprądzie, a ocenie poddano wpływ wielkości stosowanego ciśnienia oraz temperatury w strefie zasilania na uzyskane wyniki rozdziału. Stwierdzono, że separacja gazu procesowego o zawartości wodoru około 30% na modułach firmy UBE z włóknem czynnym z poliimidów pozwala na uzyskanie, w procesie jednostopniowym, permeatu o zwiększonej koncentracji H2 w stosunku do surowca, nawet o 80%.
The article presents the results of investigation into process gas upgrading with respect to hydrogen on a membrane module produced by the UBE firm. The impact of process conditions on the chemical content of the products permeate and retentate was investigated. The process was conducted in parallel current, and the influence of the value of pressure used and temperature in the supplying zone on the obtained separation results were assessed. It has been ascertained that separation of process gas with hydrogen content about 30% on modules of the UBE firm with active fibre of polyamides allows to obtain, in a single-stage process, permeate with increased H2 concentration in relation to the raw material, even by 80%.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2006, 2; 73-80
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of gas holdup on the efficiency of cyclonic-static microbubble flotation column for oily wastewater treatment
Autorzy:
Ning, K.
Huang, G.
Xu, H.
Wu, L.
Li, X.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/208139.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bubble columns
efficiency
flotation
wastewater treatment
oil water separation
kolumna flotacyjna
efektywność
flotacja
oczyszczanie ścieków
separacja wody
Opis:
A cyclonic-static microbubble flotation column of a novel construction was used in oil-water separation fields and has high efficiency for oil-water separation. The gas holdup is a key parameter for the evaluation of the performance of a flotation column. The gas holdup, closely related to the bubble size, bubble velocity and superficial gas velocity, is one of the most important parameters characterizing the hydrodynamics of a bubble column. The effect of gas holdup in a cyclonic-static microbubble flotation column was investigated. In addition, several operating parameters such as the circulating pressure, superficial gas velocity, and frother consumption were also investigated. The gas holdup was positively correlated to the superficial gas velocity. The gas holdup of clean water and oil wastewater increased along with the increase of the frother consumption. The separation mechanism of cyclonic-static microbubble flotation column was analyzed.
Źródło:
Environment Protection Engineering; 2018, 44, 2; 5-17
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimizing management of the condensing heat and cooling of gases compression in oxy block using of a genetic algorithm
Autorzy:
Brzęczek, M.
Bartela, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/240478.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CO2 capture
CO2 compression
air separation unit
flue gas conditioning
genetic algorithm
usuwanie CO2
sprężanie CO2
separator powietrza
kondycjonowanie spalin
algorytm genetyczny
Opis:
This paper presents the parameters of the reference oxy combustion block operating with supercritical steam parameters, equipped with an air separation unit and a carbon dioxide capture and compression installation. The possibility to recover the heat in the analyzed power plant is discussed. The decision variables and the thermodynamic functions for the optimization algorithm were identified. The principles of operation of genetic algorithm and methodology of conducted calculations are presented. The sensitivity analysis was performed for the best solutions to determine the effects of the selected variables on the power and efficiency of the unit. Optimization of the heat recovery from the air separation unit, flue gas condition and CO2 capture and compression installation using genetic algorithm was designed to replace the low-pressure section of the regenerative water heaters of steam cycle in analyzed unit. The result was to increase the power and efficiency of the entire power plant.
Źródło:
Archives of Thermodynamics; 2013, 34, 4; 199-214
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fluidization characteristics and separation performance of mild-hot gas-solid fluidized bed
Autorzy:
Lv, Bo
Luo, Zhenfu
Zhang, Bo
Zhao, Yuemin
Qin, Yunfei
Powiązania:
https://bibliotekanauki.pl/articles/109724.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dry coal separation
mild-hot gas-solid fluidized bed
bed temperature
fluidization characteristics
Opis:
In recent years, the mild-hot gas-solid fluidized bed had a crucial influence on wet-in-feed sorting when it comes to moist feed (e.g., lignite) because of its expanding sorting range. To explain the favorable sorting effect of the mild-hot gas-solid fluidized bed, the fluidization characteristics (e.g., the pressure drop, density, etc.) was studied under different work conditions. In addition, a high-speed dynamic camera was used in this study to compare the slumping behavior of the magnetite slag at different temperatures. The optimum conditions for coal separation was also studied by Design-Expert software. It was shown that the bed temperature of the fluidized bed has a particular effect on its stability when the bed temperature was below 120 °C, which had a great influence on the separation. Finally, the probable deviation E of the mild-hot gas-solid fluidized bed under optimum operation conditions could be as low as 0.09 g/cm3 which showed the good separation ability.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 1; 184-195
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental investigations of additional gas extraction inside a cyclone
Autorzy:
Kępa, A.
Powiązania:
https://bibliotekanauki.pl/articles/240066.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas cyclone
particle separation
dust collection
additional gas extraction (bleed flow)
separacja cząstek
odpylanie
wydobycie gazu
Opis:
The paper presents the results of investigations on a cyclone with additional gas extraction. The experiments were performed in the cyclone with a diameter of 0.2 m equipped with a truncated counter-cone situated in the dust bin inlet. The gas stream flowing through the counter-cone was 10 and 20% of the gas supplied to the cyclone. The separation efficiencies and pressure loss were measured. The experiment showed that the extraction of gas by the counter-cone deteriorated the cyclone efficiency and forcing the outflow of gas through the counter-cone requires the use of an additional outlet fan.
Źródło:
Archives of Thermodynamics; 2013, 34, 4; 247-256
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical models of the air separation through polymer membranes at magnetic field
Autorzy:
Strzelewicz, A.
Grzywna, Z. J.
Powiązania:
https://bibliotekanauki.pl/articles/346951.pdf
Data publikacji:
2007
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydział Technologii i Inżynierii Chemicznej
Tematy:
diffusion
membrane
time lags
gas mixtures
air separation
Opis:
This paper is addressed to the membrane air separation i.e. the gas mixture of quite similar gases in many respects, except one: oxygen is paramagnetic whereas nitrogen is diamagnetic. This fact forms the basis for their separation. The numerical studies and theoretical predictions concerning the air membrane separation in the presence of a magnetic field are discussed. Some experimental data concerning the „magnetic membranes” i.e. ethylcellulose membranes with neodymium powder, are also presented.
Źródło:
Ars Separatoria Acta; 2007, 5; 34-44
1731-6340
Pojawia się w:
Ars Separatoria Acta
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving separation efficiency of 6-1 mm coal by introducing vibration energy to dense medium gas-solid fluidized bed
Autorzy:
He, J.
Zhao, Y.
Luo, Z.
Zhao, J.
Duan, C.
He, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110018.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
vibration energy
dense medium gas-solid fluidized bed
fluidization quality
density uniformity
separation efficiency
Opis:
Effects of the vibration energy on the fluidization quality and separation performance of dense medium gas-solid fluidized bed were investigated experimentally. The magnetite powder with a wide size range of 0.3-0.074 mm was utilized as the basic medium solids. 6-1 mm fine coal sample from Yongcheng (China) was used to perform the separation experiments. The results indicate that the vibration amplitude A and superficial gas velocity U are greatly significant to the fluidization stability and the density distribution uniformity. Comparing with the bed without vibration, the optimal SP and Sρ values of 0.034 kPa and 0.018 g/cm3 are acquired in vibration bed with the operating factors of A = 1 mm, U = 1.8Umf, f = 15 Hz and Hs = 150 mm. The coal ash content was reduced from 27.84% to 9.50% at a separating density of 1.68 g/cm3 with a probable error E value of 0.505. The separation efficiency of 6-1mm fine coal is effectively improved by introducing vibration energy to dense medium gas-solid fluidized bed. The technology provides a novel approach to achieve high-efficiency separation of 6-1 mm fine coal in the arid and water-shortage areas.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 95-108
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie zjawisk akustycznych w pomiarze składu mieszanin gazu
Autorzy:
Grzywnowicz, K.
Wiciak, G.
Powiązania:
https://bibliotekanauki.pl/articles/305206.pdf
Data publikacji:
2018
Wydawca:
Wydawnictwo Druk-Art
Tematy:
pomiar stężenia gazu
akustyczna separacja CO2
mieszanina gazowa
gas concentration measurement
acoustic CO2 separation
gas mixture
Opis:
W licznych procesach technologicznych pomiar stężenia poszczególnych składników mieszanin gazowych stanowi istotne zagadnienie, warunkujące m.in. bezpieczeństwo pracy. Jednakże w wielu obszarach inżynierii pomiar ten musi zostać dokonany w trudnych warunkach otoczenia, charakteryzujących się wysokim zapyleniem, wilgotnością czy atmosferą wybuchową. W artykule przedstawiono koncepcję wykorzystania zjawisk akustycznych, w szczególności rezonansu akustycznego, do prowadzenia pomiarów składu mieszanin gazowych oraz zaprezentowano przykładowe konfiguracje urządzeń ją wykorzystujących. Omówiono także przykłady komercyjnie dostępnej aparatury pomiarowej, bazującej na opisanej idei wykorzystania zjawisk akustycznych w pomiarze składu mieszanin gazowych.
In numerous technological processes, measurement of concentration of subsequent components of gaseous mixtures states important aspect, influencing for instance staff safety. However, in plenty of fields of engineering, such measurement has to be executed in tough environment, characterized by extreme dust content, high humidity or risk of explosion. In the paper, the concept of utilization of acoustic phenomena, especially considering acoustic resonance, to perform measurements of gaseous mixtures composition is presented. Furthermore, examples of possible configuration of devices, utilizing such concept, are discussed, and examples of commercially available tools, basing on described idea of utilization of acoustic phenomena in gas mixture composition measurement, are indicated.
Źródło:
Napędy i Sterowanie; 2018, 20, 10; 90-94
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena przydatności i optymalizacja warunków rozdzielania w chromatografii gazowej bez oddziaływań sorpcyjnych (EC-GC)
Evaluation of the usefulness and optimization of the separation conditions in Empty Column Gas Chromatography (EC-GC)
Autorzy:
Boczkaj, G.
Kamiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/92226.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
rozdzielanie chromatograficzne
chromatografia gazowa
GC
destylacja symulowana
SIMDIS
EC-GC
chromatographic separation
gas chromatography
simulated distillation
Opis:
Dotychczasowe badania wykazały, że możliwe jest rozdzielanie wysokowrzących mieszanin techniką chromatografii gazowej z zastosowaniem pustej rurki kapilarnej z topionej krzemionki, zamiast kolumn zawierających fazę stacjonarną. Operacja rozdzielania chromatograficznego ma miejsce jedynie na zasadzie różnicy temperatur wrzenia rozdzielanych substancji. Wysoki stopień podobieństwa warunków rozdzielania, osiąganych w ten sposób, z klasyczną destylacją okazuje się być korzystny, w przypadku zastosowania chromatografii gazowej do destylacji symulowanej. W pracy przedstawiono wyniki badań nad charakterystyką rozdzielczą pustej rurki z topionej krzemionki. Zbadano sprawność układu chromatograficznego w warunkach braku oddziaływań sorpcyjnych, a także przydatność takich warunków rozdzielania do destylacji symulowanej tj. do wyznaczania temperatury wrzenia wybranych substancji chemicznych na podstawie ich retencji względem substancji wzorcowych. W pracy porównano rezultaty uzyskane z zastosowaniem badanej metodyki z rezultatami otrzymanymi dla klasycznych kolumn do destylacji symulowanej. Badania wykazały większą zgodność wyznaczanych wartości temperatury wrzenia z wartościami rzeczywistymi w porównaniu z metodyką normowaną destylacji symulowanej.
Previous studies revealed that it is possible to separate a high-boiling mixtures by gas chromatography using an empty fused silica capillary tubing instead of column containing stationary phase. Chromatographic separation takes place only on the basis of differences in boiling point values of separated substances. The high degree of similarity in terms of separation achieved in this way, with a classic distillation, appears to be advantageous when gas chromatography is used for simulated distillation. The paper presents results of research on the separation properties of the empty fused silica tubing. The efficiency of such chromatographic system has been examined as well as usefulness of such conditions for simulated distillation i.e. to determine the boiling point of the selected chemicals based on their retention in respect to the reference substances. The results obtained using the empty column gas chromatography (ECGC) conditions and with the use of classical simulated distillation columns are compared in the paper. Studies have shown more accurate determination of the boiling point values comparing with simulated distillation standard method.
Źródło:
Camera Separatoria; 2013, 5, 1; 5-10
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Absorptive separation of carbon dioxide from flue gas of high capacity power plants
Autorzy:
Wójcik, K.
Powiązania:
https://bibliotekanauki.pl/articles/175330.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CO2 capture
economic and technical analysis
Opis:
The paper presents a methodology for modeling the processes of absorptive separation of carbon dioxide (CO2) from the power plant flue gases. The absorption systemsof two supercritical power plants with the capacity of 460 MW and 600 MW were selected for the study. The process of CO2 separation from flue gases by means of chemical absorption with the use of monoethanolamine and NH3 aqueous solutions was analysed. The power plant demands for power needed for the separation, compression and transport of CO2 to the disposal site was determined. The effects of absorptive separation of CO2 for the power plant were determined, and an economic analysis of such an undertaking was conducted.
Źródło:
Transactions of the Institute of Fluid-Flow Machinery; 2016, 132; 29-56
0079-3205
Pojawia się w:
Transactions of the Institute of Fluid-Flow Machinery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Apparatus to study volumetric properties of the gas hydrates
Autorzy:
Lorenc, M.
Warowny, W.
Powiązania:
https://bibliotekanauki.pl/articles/298898.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
hydrate
hydratation
methane
hydrogen sulfide
separation
desulfurization
natural gas
laboratory apparatus
nucleation
phase equilibrium
dissociation
uwadnianie
metan
aparatura laboratoryjna
siarkowodór
gaz ziemny
Opis:
A new pVT apparatus was built on Department of Drilling, Oil and Gas at AGH University of Science and Technology, which was sponsored by the Polish Oil and Gas Company. The apparatus was adjusted to measurement of the proprieties of the gas hydrates. On the schematic diagram of this apparatus, methodological solutions of the equipment were compared to different of this kind literature apparatuses. Among others innovatory elements of the present apparatus some of them should be counted: method of the changes of volume or automatic system (arrangement) to taking the sample with supported nafion drying. The first step of the experimental study is desulfurization of the natural, by using process of the hydrates formation in gas mixture.
Źródło:
AGH Drilling, Oil, Gas; 2012, 29, 3; 419-430
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Oxidizing Reactor on Flue Gas Denitrification by Ozonation and Possibility of by-Product Separation
Autorzy:
Kordylewski, W.
Hałat, A.
Łuszkiewicz, D.
Powiązania:
https://bibliotekanauki.pl/articles/185776.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ozone
simulated flue gas
denitrification
desulphuration
by-products
ozon
spaliny symulowane
denitryfikacja
odsiarczanie
Opis:
Results of laboratory scale research have been presented on the effects of an oxidizing reactor on ozone consumption and by-producs composition and separation of simultaneous NOx and SO2 removal from a carrier gas by ozonation method and absorption in an alkaline solution. The additional Dreschel washer added before two washers containing 100 ml of 0.1 molar NaOH solution played the role of an oxidation reactor. Its effect was investigated using an empty (dry or wetted) or filled with packing elements washer. The measured by-products in a scrubber and in the oxidizing reactor were SO32-, SO42-, NO2- and NO3- ions, respectively. It has been shown that use of oxidizing reactor improves NOx removal efficiency reducing ozone consumption. Wetting of the oxidation reactor with water enables a preliminary separation of sulphur and nitrogen species between the oxidizing reactor and an alkaline absorber. Application of packing elements in the oxidizing reactor allows to retain 90% of nitrogen compounds in it. Some results were confirmed by tests in pilot scale.
Źródło:
Chemical and Process Engineering; 2017, 38, 1; 177-191
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separacja par 1-propanolu ze strumienia gazu obojętnego w procesie ETSA
Separation of1-propanol vapour from non-condensable gas during ETSA process
Autorzy:
Downarowicz, D.
Powiązania:
https://bibliotekanauki.pl/articles/2071195.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
desorpcja elektrotermiczna
alkohol
kondensacja
gaz obojętny
electrothermal desorption
condensation
inert gas
Opis:
Przedstawiono analizę wpływu wielkości strumienia gazu obojętnego na przebieg i efektywność wykraplania par 1-propanolu w skraplaczu wężow-nicowym. Stwierdzono, że w wężownicy skraplacza występują trzy strefy wymiany ciepła. Analizę przeprowadzono dla strumieni azotu 80-220 dm3/h i temperatury -32 to -10°C. Stwierdzono, że efektywność wymiany ciepła wzrasta wraz z obniżeniem strumienia azotu i temperatury kondensacji.
Experimental and theoretical investigations dealing with condensation of 1-propanol - nitrogen mixture inside the 4 mm ID coil condenser tube are presented in the paper. The studies were performed with nitrogen flow rate varying from 80 to 220 dm3/h. The operating temperature ranged from -32 to -10°C. The energy efficiency of VOC condensation increased with the decreasing of non-condensable gas flow rate and operating temperature.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 3; 33-34
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new intelligentapproach in predictive maintenance of separation system
Autorzy:
Marichal, G. N.
Ávila, D.
Hernández, A.
Padrón, I.
Powiązania:
https://bibliotekanauki.pl/articles/116306.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
marine fuel separators
separation system
predictive maintenance
greenhouse gas (GHG)
Fast Fourier Transformation (FFT)
genetic neuro-fuzzy system
genetic algorithm
supervised learning
Opis:
Reducing contaminant emissions is an important task of any industry, included the maritime one. In fact, in April 2018, IMO (International Maritime Organization) adopted an Initial Strategy on reduction of Greenhouse gas (GHG) emissions from ships. An essential part responsible for producing these emissions is the diesel engine. For that reason vessels include separation systems for heavy fuel oils. The purpose of this work is to improve the predictive maintenance techniques incorporating new intelligent approaches. An analysis of vibrations of this separation system was made and their characteristics were used in a Genetic Neuro-Fuzzy System in order to design an intelligent maintenance based on condition monitoring. The achieved results show that the proposed method provides an improvement since it indicates if a maintenance operation is necessary before the schedule one or if it could be possible extend the next maintenance service.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2020, 14, 2; 385-390
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies