Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "crash safety" wg kryterium: Wszystkie pola


Tytuł:
Impact Loads and Crash Safety of the Cockpit of a Composite Glider
Autorzy:
Lindstedt, Łukasz
Rodzewicz, Mirosław
Rzymkowski, Cezary
Kędzior, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/97825.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
crash safety
composite glider
model experimental validation
Opis:
One major problem associated with gliding is the safety of the crew during landings in the country outside the airfield. The analysis of glider-accident statistics shows that such out-landings may significantly influence the safety. Therefore, of vital importance are the crashworthiness properties of the glider fuselage structure. The subject of the study was the PW-5 glider fuselage made of composites and subjected to high loads typical of glider crashes. The aim was to provide experimental data for validation of a numerical model of the cockpit-pilot system during impact. Two experimental tests with the composite glider cockpit were performed using a typical car-crash track. During the first test the cockpit with a dummy inside was crashed onto the ground at the angle of 45 degrees at a speed of 55 km/h. Accelerations and deformations at chosen points in the cockpit as well as signals coming from the dummy sensors and forces in the seat belts were recorded. The second test was an impact into a concrete wall at a speed of about 80 km/h. The full-scale tests were accompanied by a number of quasi-static and dynamic laboratory tests on samples of composite material. The experimental tests provided valuable results for the parametrical identification of a simulation model developed using the MADYMO software.
Źródło:
Fatigue of Aircraft Structures; 2019, 11; 39-55
2081-7738
2300-7591
Pojawia się w:
Fatigue of Aircraft Structures
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crash safety of a typical bay table in a railway vehicle
Testy bezpieczeństwa typowych stołów wykorzystywanych w pociągach
Autorzy:
Matsika, E.
Peng, Q.
Powiązania:
https://bibliotekanauki.pl/articles/374737.pdf
Data publikacji:
2015
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
secondary collision
bay table
table in train
crash
quasi-static tests
dynamic tests
body block
impact aggression
kolizja wtórna
stół w pociągu
wypadek
badania quasi-statyczne
testy dynamiczne
Opis:
Increasingly, urban and high speed trains are incorporating tables (workstations) as common railway vehicle interior furniture because passengers prefer seating by bay tables. Among table design characteristics, the most challenging is meeting crashworthiness requirements. Past accident data and sled test results have shown that in the event of railway vehicle frontal impact, occupants located in the bay seating are exposed to chest and abdominal injuries upon contact with tables resulting from secondary collision. In some cases tables have tended to be structurally weak; they easily detach from the side walls and/or floor mounting. Subsequently these become unguided missiles that strike occupants, resulting in injuries. This paper presents an analysis of the crash performance of a typical bay table. The results provide some understanding of the table’s crash safety, giving an indication of its impact aggression. Table materials are characterised using quasi-static compressive tests. In addition, experimental dynamic (impact) tests are conducted using a pendulum representing a body block (mass). The results provide information about the possible loading of the table on the occupant in the event of a crash. Contact forces are compared with chest and abdominal injury tolerance thresholds to infer the collision injury potential. Recommendations are then made on design of bay tables to meet the “functional-strength-and-safety balance”.
Coraz częściej zarówno w pociągach miejskich, jak i pociągach dużych prędkości wprowadza się do wyposażenia stoły. Wynika to z wymagań pasażerów, którzy to preferują siedzenie przy stołach. Wśród cech konstrukcyjnych stołów, największym wyzwaniem jest spełnienie wymagań wytrzymałości zderzeniowej. Wcześniejsze informacje dotyczące wypadków i wyniki badań wykazały, że w przypadku czołowego zderzenia pojazdów kolejowych pasażerowie, znajdujący się w sąsiedztwie stołów, są narażeni na urazy klatki piersiowej i brzucha na skutek wtórnej kolizji. W niektórych przypadkach stoły miały słabą strukturę; w prosty sposób można je było odłączyć od ścian bocznych i/lub podłogi, do których były przymocowane. W następstwie stawały się one niekontrolowanymi pociskami, które uderzały pasażerów i powodowały ich obrażenia. W artykule przedstawiono analizę wyników wypadku dla typowego stołu. Wyniki dostarczają wiedzę o bezpieczeństwie w razie zaistnienia 98 E. Matsika, Q. Peng wypadku z udziałem stołu, podają informacje o skutkach. Materiały stosowane na stoły zostały zbadane za pomocą quasi-statycznych testów ściskających. Ponadto, przeprowadzono eksperymentalne dynamiczne testy wykorzystujące wahadło. Wyniki dostarczają informacji na temat potencjalnego oddziaływania stołu na pasażera w momencie zderzenia. Siły kontaktowe są porównywalne z progami tolerancji, odpowiadającym klatce piersiowej i jamie brzusznej, w wyniku czego można przewidzieć skutki kolizji. W związku z tym zaleca się wykonanie stołów z zachowaniem „równowagi funkcjonalności, wytrzymałości i bezpieczeństwa”.
Źródło:
Transport Problems; 2015, T. 10, z. spec.; 97-110
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane zagadnienia wpływu napraw powypadkowych nadwozi na bezpieczeństwo drogowe
Selected problems of the influence of crash body repairs on road safety
Autorzy:
Wrona, J.
Wrona, R.
Powiązania:
https://bibliotekanauki.pl/articles/301847.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
powypadkowe naprawy pojazdów
nadwozie
bezpieczeństwo ruchu drogowego
crash body repairs
road safety
Opis:
W opracowaniu przedstawiono problem oceny wpływu napraw powypadkowych nadwozi samochodów osobowych na bezpieczeństwo drogowe. Artykuł podnosi kwestie eksploatacji pojazdów i ich napraw oraz zwraca uwagę na istniejące braki w krajowym systemie dopuszczania do ruchu nadwozi po naprawach. Publikacja uwzględnia też potrzebę regulacji prawnych i wykonawczych procedur dopuszczania pojazdów do ruchu po wcześniej wykonywanych naprawach.
The paper presents the problem of the evaluation of the infl uence of crash body repairs on road safety. It raises the issue of vehicle operation and repairs, and draws attention to existing gaps in the national system of granting type approvals for repaired car bodies. The paper also takes into consideration the need for legal regulations and executive procedures regarding type approval of repaired vehicles.
Źródło:
Eksploatacja i Niezawodność; 2008, 4; 49-54
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of selected design parameters of the composite-foam cover rail on the course of the TB11 crash test of a road safety barrier forming a horizontal concave arc
Wpływ wybranych parametrów konstrukcyjnych nakładki kompozytowo-pianowej na przebieg testu zderzeniowego TB11 drogowej bariery ochronnej w łuku poziomym wklęsłym
Autorzy:
Nycz, D. B.
Powiązania:
https://bibliotekanauki.pl/articles/1363344.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
TB11 virtual crash test
barrier forming horizontal concave arc
composite-foam rail
cover rail design parameters
wirtualny test zderzeniowy TB11
bariera w łuku poziomym wklęsłym
nakładka kompozytowo-pianowa
parametry konstrukcyjne nakładki
Opis:
The article presents a numerical examination of the influence of selected design parameters of a CFR2 composite-foam cover rail of a roadside barrier (described in previous publications by the same author) on the course of the TB11 virtual crash test. The crash tests were carried out on a modified SP-05/2 barrier of the N2-W4-A class, forming a horizontal concave arc with a radius of 150 m. During the tests, a passenger car with a mass of 900 kg hit the barrier with a velocity of 100 km/h at an angle of 20 °. The CFR2 cover rail consists of polyester-glass composite segments partly filled with polyurethane foam. The cover rail cross-section fits the B-type guiderail profile of the barrier. The numerical computations were carried out in the LS-Dyna environment, with using the Geo Metro vehicle model taken from the NCAC website and subjected to necessary modifications. The results of the virtual crash tests were analysed in respect of all the qualitative and quantitative parameters required by standards PN-EN 1317-1:2010 and PN-EN 1317-2:2010. The analyses carried out showed the design of the CFR2 cover rail to be correct and sufficient for the TB11 crash test results to be accepted.
W pracy przedstawiono badania numeryczne wpływu wybranych parametrów konstrukcyjnych nakładki kompozytowo-pianowej CFR2 (opisanej w poprzednich publikacjach autora) na przebieg wirtualnego testu zderzeniowego TB11. Testy zderzeniowe obejmują zmodyfikowaną barierę SP-05/2 klasy N2-W4-A, tj. w łuku poziomym wklęsłym o promieniu 150 m. Test TB11 dotyczy samochodu osobowego o masie 900 kg, uderzającego w barierę z prędkością 100 km/h pod kątem 20°. Nakładka CFR2 składa się z segmentów kompozytowych poliestrowo-szklanych, częściowo wypełnionych pianką poliuretanową. Przekrój poprzeczny nakładki jest dopasowany do prowadnicy typu B. Obliczenia numeryczne przeprowadzono w środowisku LS-Dyna z wykorzystaniem modelu pojazdu Geo Metro, pobranego ze strony NCAC i poddanego niezbędnym modyfikacjom. Wyniki wirtualnych testów zderzeniowych przeanalizowano pod kątem wszystkich parametrów jakościowych i ilościowych wymaganych przez normy PN-EN 1317-1:2010 i PN-EN 1317-2:2010. Przeprowadzone analizy wykazały, że konstrukcja nakładki CFR2 jest trafna i wystarczająca do zapewnienia przyjęcia badania zderzeniowego TB11.
Źródło:
Archiwum Motoryzacji; 2017, 76, 2; 107-122
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aircraft crash onto a nuclear power plant : screening procedure and approach for a probabilistic analysis
Autorzy:
Berg, H.-P.
Powiązania:
https://bibliotekanauki.pl/articles/2069647.pdf
Data publikacji:
2010
Wydawca:
Uniwersytet Morski w Gdyni. Polskie Towarzystwo Bezpieczeństwa i Niezawodności
Tematy:
aircraft crash
crash frequency
probabilistic safety assessment
screening
Opis:
International experience has shown that external hazards (e.g. aircraft crash, flooding) can be safety significant contributors to the risk in case of nuclear power plants` operation. This is due to the fact that such hazards have the potential to reduce simultaneously the level of redundancy by damaging redundant systems or their supporting systems. In this paper, the procedure for the external hazard aircraft crash is described In more detail, starting with the screening procedure in order to determine scope and content of the assessment and the approach for those cases where a full scope analysis has to be performed. The consideration regarding this hazard does as not cover an intended aircraft crash.
Źródło:
Journal of Polish Safety and Reliability Association; 2010, 1, 1; 27--34
2084-5316
Pojawia się w:
Journal of Polish Safety and Reliability Association
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The safety of motorcycle users
Autorzy:
Bańkowski, Antoni
Frej, Damian
Powiązania:
https://bibliotekanauki.pl/articles/24200874.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
motorcycles
crash tests
safety
Opis:
There are more and more motorcycles on the roads. This can be seen, for example, on the basis of statistical data from the Central Statistical Office, where newly registered two-wheelers are presented. Based on the data, it can be seen that there are more and more newly registered motorcycles every year and that there are many road accidents involving two-wheelers. According to data provided by the WHO, as many as 28% of fatalities in road accidents are motorcycle drivers [10]. The article below presents a review of the literature related to motorcycle crash tests and the dummies used for the tests. The work presents the most important standard that regulates how motorcycle crash tests are performed. The main purpose of the article is to draw attention to the problem of safety of motorcycle users. The text describes various crash tests of two-wheelers and stands used for testing motorcycles. The work presents a dummy specially designed for crash tests involving motorcycles. Differences between this dummy and other dummies used have also been described. The paper discusses the literature and describes research related to crash tests.
Źródło:
Archiwum Motoryzacji; 2023, 101, 3; 32--49
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crash testy urządzeń infrastruktury drogowej w Inowrocławiu
Crash tests of road infrastructure facilities in Inowrocław
Autorzy:
Szruba, M.
Powiązania:
https://bibliotekanauki.pl/articles/364091.pdf
Data publikacji:
2014
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
crash test
bezpieczeństwo
najechanie
bariera
safety
hovering
barrier
Opis:
25 czerwca 2014 r. w Inowrocławiu już po raz czwarty odbyły się crash testy (testy zderzeniowe) urządzeń infrastruktury drogowej. Po raz pierwszy w Polsce, przy udziale zaproszonych gości i mediów, przeprowadzono także crash test z wykorzystaniem autobusu. Spotkanie zgromadziło ponad 180 osób.
For the fourth time, road infrastructure facilities crash tests were held on 25 June 2014 in Inowrocław. Also a public crash test with the use of a bus was conducted for the first time in Poland, which was observed by guests and the media.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2014, 5; 95
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Child safety in a car during a frontal collision
Autorzy:
Żuchowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/241889.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
vehicle safety
crash tests
child safety
booster seat
Opis:
Road accidents with participation of the children are of particular nature. According to surveys, the older children at the age of 8-12 years are often transported in cars in a wrong way. They are usually fastened with seat belts designed for adult passengers. In order to make the seat belts safe for a child, they should be used together with a booster cushion or a high back booster seat. This paper presents the test results and analysis of dynamic loads affecting a child in the back seat of a passenger car during a frontal collision. The car body was accelerated to a speed of about 48 km/h and then it was suddenly stopped in a time of about 100 ms. The analysis was carried out on the basis of results of experimental tests performed at the collision station in the Automotive Industry Institute in Warsaw. The attention was paid to the influence of protection device type on the P10 dummy, representing a child at the age of about 10 years. Three child protection options during a collision were considered: the dummy was sitting directly in a car seat, on a booster cushion and on a seat. The dummy was fastened with standard seat belts. Evaluation of the protection device influence on the dummy loads was given in association with the operation of the seat belts. During evaluation, the indexes of biomechanical resistance of a human body to the impact load effects were used. They made the basis for the evaluation of the child injury severity risk.
Źródło:
Journal of KONES; 2013, 20, 1; 395-402
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Results of the crash tests of electric cars
Autorzy:
Żuchowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/243537.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
vehicle safety
crash tests
safety of passengers
electric vehicles
transport drogowy
bezpieczeństwo pojazdu
testy zderzeniowe
bezpieczeństwo pasażerów
pojazdy elektryczne
Opis:
The work presents the results of crash tests carried out with six electrical car models (from 2012-2013), with the weight of 1200-2300 kg (Smart Electric Driver, Mitsubishi IMiEV, Nissan Leaf, CODA, Ford Focus BEV, Tesla Model S). The results were published on the Internet by the National Highway Traffic Safety Administration (USA), and the tests involved a car travelling at the speed of 56 km/h, hitting frontally into a non-deformable (stiff) barrier, positioned perpendicularly to the car’s direction of movement. Particular attention was paid to the deformation of the car after hitting the barrier, so-called stiffness characteristics of the frontal crumple zone, and to the loads on the dummies placed at the driver’s and passenger’s seat (Hybrid III, a 50-centile man and a 5-centile woman). Results of the tests with electric cars were compared with the results of the tests with over a hundred of combustion engine cars with similar weight and type of car body (sedan, hatchback). The tests proved that, in the majority of electrical cars tested, the deformation of the frontal crumple zone after hitting an obstacle is larger than in case of similar cars with internal combustion engine. Because of that, the dynamic loads on the occupants of the vehicle tend to be smaller, as indicated by measured loads on the heads and chests of the dummies. The results may suggest that the frontal crumple zone may be better constructed in the case of electric cars, while the design possibilities regarding that area are limited in standard cars due to the combustion engine, which is not deformed during the accident, which makes it more difficult for the energy of the crash to dissipate.
Źródło:
Journal of KONES; 2018, 25, 1; 483-490
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezpieczeństwo transportu
Transport safety
Autorzy:
Bril, J.
Łukasik, Z.
Powiązania:
https://bibliotekanauki.pl/articles/311332.pdf
Data publikacji:
2013
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
bezpieczeństwo transportu
wypadki
systemy transportowe
transport safety
crash
transport systems
Opis:
W artykule ukazana została próba przybliżenia bezpieczeństwa transportu, główne przyczyny powstawania wypadków oraz stan bezpieczeństwa w poszczególnych gałęziach transportu wraz z ich przyczynami i głównymi sytuacjami inicjującymi powstanie zdarzenia.
In article an attempt has been depicted to approximate of transport safety, the main causes of accidents and the security situation in the various transport sectors, including their causes and the main situations initiating the formation of road events.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2013, 14, 3; 1895-1905
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies