Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "air bubble" wg kryterium: Wszystkie pola


Tytuł:
Pomiar kształtu pęcherzy powietrza metodą optyczną
Measurement of air bubble shape with the optical method
Autorzy:
Rząsa, M.
Powiązania:
https://bibliotekanauki.pl/articles/151319.pdf
Data publikacji:
2000
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Opis:
W pracy przedstawiono stanowisko badawcze do pomoaru parametrów aeracji cieczy w pionowej kolumnie. Jednym z ważnych parametrów jest kształt i wielkość pęcherzyków powietrza. W artykule zaproponowano pomiar kształtu metodą optyczną. Wykorzystano metodę prześwietlania kolumny jednorodną wiązką światła, a następnie detekcję promienia świetlnego. Przedstawiono wyniki pomiaru kształtu pęcherzyków oraz dokonano analizy niepewności pomaru.
A test stand for measurements of parameters of liquid aeration has been described in the paper. Shapes and sizes of air bubbles belong to the most important parameters. The autor proposed the optical method for the shape measurement. the method consists in sending a uniform light beam through the column and next detection of the light ray. The paper contains the method description and the results of experiments. The paper contains the results of measurement of bubble shape and analysis of errors.
Źródło:
Pomiary Automatyka Kontrola; 2000, R. 46, nr 10, 10; 2-5
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation of continuous interaction process between air bubble and various roughness coal surfaces using microbalance
Autorzy:
Guo, Zhimin
Yang, Jianguo
Wang, Yuling
Powiązania:
https://bibliotekanauki.pl/articles/1450050.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
surface roughness
air bubble
contact angle
continuous interaction
Opis:
Surface roughness of particles plays an important role in bubble-particle interaction process. However, the continuous attachment and detachment process have rarely been characterized between the surface of different roughness and air bubble. In this study, the continuous attachment and detachment processes between the surface of different roughness and air bubble were investigated by a highly sensitive microbalance. The bubble–surface interaction process was monitored by a high-speed camera to analyze the geometry parameters, including distance, adhesion diameter, and contact angle. It was found that the bubble-particle attachment time increased with the increase of surface roughness. The magnitude of the repulsive force in the bubble-surface approaching process increased with the increase of surface roughness, while the attractive force in the bubble-particle retracting process decreased monotonically with the surface roughness. The force measured by microbalance was finally compared with the calculated one. The calculated force at the biggest force point also increased with the decrease of surface roughness. These results indicate that coal particles with lower surface roughness, which have less water-filled pores and pillars, is more conducive to flotation due to the lower repulsive force in the bubble-particle attachment process and higher adhesive force in the bubble-particle detachment process, and vice versa.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 11-23
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three-phase contact line expansion during air bubble attachment to hydrophobic solid surface – experiment and modeling
Autorzy:
Basarova, P.
Soušková, K.
Zawala, J.
Powiązania:
https://bibliotekanauki.pl/articles/110269.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Attachment
simulations
bubble
three-phase contact
dewetting
Opis:
Kinetics of spreading of the three-phase contact hole (dewetting) formed by an air bubble colliding with hydrophobic solid surface, after rupture of intervening liquid film, was studied both experimentally and numerically. During experiments it was found that evolution of the TPC line diameter with time occurs with characteristic S-shaped trend which, in consequence, causing rather unexpected maxima at the TPC line spreading velocity curves. It was determined that position of this maximum appears after 1-2 ms after TPC hole formation and its position (in respect to time) depends on the bubble diameter. In solution of surface-active substance this maximum was much smoother and longer. By means of complementary numerical calculations the source of maxima existence and differences in their position and shapes were explained. It was concluded that this effect has only hydrodynamic origin, caused by different course of bubble shape pulsations during TPC line formation and spreading, which depends on degree of liquid/gas interface immobilization (fluidity retardation).
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 4; 1095-1106
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dodecyl amine adsorption at different interfaces during bubble attachment/detachment at a silica surface
Autorzy:
Wang, X.
Miller, J. D.
Powiązania:
https://bibliotekanauki.pl/articles/110684.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
VSFS
air bubble attachment
amine adsorption density
Opis:
The reverse flotation of quartz and other gangue silicate minerals with alkyl amines is an important and well known strategy for the processing of iron ore, low grade bauxite ore, and phosphate rock. Some details of amine adsorption by quartz have been described in the literature, but little is known about the disposition of amine during bubble attachment. Now, a new experimental procedure involving vibrational sum frequency spectroscopy (VSFS) has been developed to provide, for the first time, a more detailed analysis of the state of dodecyl amine (DDA) adsorption at different interfaces during bubble attachment/detachment at a silica surface. The results show that the hydrophobic surface state at the silica surface is created by the transfer of a well-organized monolayer of DDA from the bubble surface to the silica surface during bubble contact and attachment.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 1; 81-88
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of components and parameters of some sulfide minerals surface tension with regards to stability of mineral-air bubble system
Autorzy:
Jańczuk, Bronisław
Zdziennicka, Anna
Powiązania:
https://bibliotekanauki.pl/articles/1450639.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
contact angle
wettability
surface tension
detachment force
sulfide minerals
Opis:
The measurements of the advancing contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane on unoxidized and oxidized galena, pyrite, chalcopyrite, djurleite, bornite and covellite at the temperature equal 293 K were made. Additionally, the measurements of the force air bubble detachment from these sulfide minerals including also chalcocite in water were performed. Using the values of the obtained contact angle of water, glycerol, formamide, ethylene glycol, diiodomethane, α-bromonaphthalene, 1,2,3-tribromopropane the components and parameters of the unoxidized and oxidized sulfide minerals surface tension were calculated. For this calculation the van Oss et al. method was applied after analysis of the components and parameters of the surface tension of liquids used for contact angle measurements. Taking into account the contact angle of water on the sulfide minerals, the detachment force of air bubble from these minerals in water was determined using our equation and comparing to that of measured one. As follows from the measurements and calculations the wetting properties of sulfide minerals and the stability of mineral-air bubble depends to a larger extent on the degree of sulfide minerals oxidation than on the type of mineral.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 6; 22-31
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The distribution of air bubble size in the pneumo-mechanical flotation machine
Rozkład wielkości pęcherzyków powietrza w pneumo-mechanicznej maszynie flotacyjnej
Autorzy:
Brożek, M.
Młynarczykowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/220346.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
flotacja
dyspersja pęcherzyków
rozkład wielkości pęcherzyków
rozkład Rayleigha
flotation
dispersion of bubbles
bubble size distribution
Rayleigh distribution
Opis:
The flotation rate constant is the value characterizing the kinetics of cyclic flotation. In the statistical theory of flotation its value is the function of probabilities of collision, adhesion and detachment of particle from the air bubble. The particle - air bubble collision plays a key role since there must be a prior collision before the particle - air bubble adhesion happens. The probability of such an event to occur is proportional to the ratio of the particle diameter to the bubble diameter. When the particle size is given, it is possible to control the value of collision probability by means of the size of air bubble. Consequently, it is significant to find the effect of physical and physicochemical factors upon the diameter of air bubbles in the form of a mathematical dependence. In the pneumo-mechanical flotation machine the air bubbles are generated by the blades of the rotor. The dispergation rate is affected by, among others, rotational speed of the rotor, the air flow rate and the liquid surface tension, depending on the type and concentration of applied flotation reagents. In the proposed paper the authors will present the distribution of air bubble diameters on the grounds of the above factors, according to the laws of thermodynamics. The correctness of the derived dependences will be verified empirically.
Flotacja jest procesem masowym, o którego przebiegu decyduje szereg zdarzeń losowych. Są nimi zderzenia ziarna z pęcherzykiem powietrza oraz trwała adhezja ziarna do powierzchni pęcherzyka. Ze względu na losowy charakter wymienionych wyżej zdarzeń można mówić jedynie o prawdopodobieństwie zajścia zdarzenia. Opisując subprocesy flotacji określonymi prawdopodobieństwami można wyznaczyć wartość stałej prędkości flotacji. Warunkiem koniecznym do zajścia adhezji jest uprzednie zderzenie ziarna z pęcherzykiem. W modelu opracowanym przez zespół Yoon i Luttrell (1989) prawdopodobieństwo zderzenia jest wyrażone wzorem (1). W praktyce flotacji wielkość ziarna i pęcherzyka są zmiennymi losowymi o określonych rozkładach. W związku z tym również prawdopodobieństwo zderzenia będzie zmienną losową o określonym rozkładzie. Istnieją modele w których stała prędkości flotacji jest wyrażona przez rozkłady wielkości ziaren i pęcherzyków (wzór 3). W tym przypadku do wyliczenia średniej wartości stałej prędkości flotacji niezbędna jest znajomości rozkładu wielkości pęcherzyków i wielkości ziarna. Również dla wyliczenia całkowitej powierzchni pęcherzyków przepływających przez jednostkę powierzchni przekroju poprzecznego w jednostce czasu, konieczna jest znajomość rozkładu wielkości pęcherzyków. W prezentowanej pracy przedstawiono sposób określenia rozkładu wielkości pęcherzyków w pneumo- mechanicznej maszynie flotacyjnej, oparty na rozważaniach heurystycznych. W procesie dyspergowania powietrza podawanego do komory flotacyjnej rośnie powierzchnia pęcherzyków powietrza, powstających z jednostki objętości gazu, co pociąga za sobą wzrost energii powierzchniowej na granicy faz ciecz-gaz. Założono, że duże bańki powietrza dzielą się na mniejsze pęcherzyki według prawa Boltzmanna rozkładu energii (wzory 10, 12 i 13). Przy założeniu, że energia pęcherzyków jest zmienną losową o rozkładzie ciągłym, wyliczono funkcję gęstości rozkładu tej zmiennej, wyrażoną wzorem (16). Średnica pęcherzyka powietrza, a zarazem jego energia są zmiennymi losowymi, pomiędzy którymi istnieje zależność funkcyjna wyrażona wzorami (11). Korzystając z twierdzenia odnoszącego się do rozkładu funkcji zmiennych losowych (wzór 17) wyliczono funkcję gęstości rozkładu średnicy pęcherzyków (wzory 18 i 20). Jest to rozkład znany w rachunku prawdopodobieństwa jako rozkład Rayleigha. Na rys.1 podana jest empiryczna funkcja gęstości rozkładu średnicy pęcherzyka. Wartość średnią wielkości pęcherzyka d -b oraz odchylenie standardowe V(db) będące miarą rozrzutu wielkości pęcherzyków wokół wartości średniej zostały wyliczone na podstawie związku pomiędzy parametrem rozkładu Rayleigha a wartością średnią i wariancją (wzory 21 i 22). Dla uzyskania zależności parametru rozkładu oraz średniej wielkości pęcherzyka od warunków fizycznych i fizykochemicznych w komorze flotacyjnej zastosowano zasadę zachowania energii dla średniej wielkości pęcherzyków (wzory 23-27). Uzyskane wyrażenia na średnią wartość średnicy pęcherzyka oraz parametr rozkładu średnicy pęcherzyka (odpowiednio wzory 31 i 32) w sposób jawny podają zależność tych wielkości od napięcia powierzchniowego roztworu flotacyjnego, wydatku powietrza oraz mocy przekazywanej do układu flotacyjnego.
Źródło:
Archives of Mining Sciences; 2012, 57, 3; 729-740
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja przepływu pęcherzyków powietrza za pomocą tomografii optycznej : przegląd metod
Identification of air bubble flow with optical tomography : a review of methods
Autorzy:
Rząsa, M. R.
Powiązania:
https://bibliotekanauki.pl/articles/2070960.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pęcherzyki powietrza
tomografia optyczna
air bubbles
optical tomography
Opis:
W pracy charakteryzowano trzy metody wyznaczania parametrów pęcherzyków gazu poruszających się w cieczy. Metody pomiarowe oparte są na tomografii optycznej. W zwięzły sposób omówiono zasadę działania, a następnie zwrócono na wady i zalety tych rozwiązań. Podano przykładowe wyniki badań oraz odniesiono się do zakresu stosowalności omówionych metod. W podsumowaniu zwrócono uwagę na istotne elementy będące pomocne przy wyborze optymalnej metody pomiarowej w zastosowaniu do badanego procesu.
The paper presents three methods for the determination of parameters of gas bubbles moving in liquid. The measuring methods are based on optical tomography. Advantages and disadvantages of technical solutions are described. Exemplary test results are given and a range of their applicability is defined. Finally, a special attention was taken to select a proper measurement method for the process tested.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 2; 107-108
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wpływu dodatku regranulatu na własności opakowaniowej folii pęcherzykowej
Ewaluation of the regranulate additive impact on the properties of air bubble film package
Autorzy:
Rojek, M.
Szymiczek, M.
Powiązania:
https://bibliotekanauki.pl/articles/278484.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
folia opakowaniowa
folia pęcherzykowa
folia polietylenowa
regranulat
właściwości reologiczne
właściwości wytrzymałościowe
regranulacja
packaging film
bubble film
polyethylene film
regranulate
rheological properties
strength properties
regranulation
Opis:
W pracy opisano problem zagospodarowania odpadów z folii pęcherzykowej, przez poddanie jej procesowi regranulacji. Badania przeprowadzono na kompozycjach zawierających regranulat oraz mieszaninę polietylenu liniowego małej gęstości (LLDPE) i polietylenu małej gęstości (LDPE). W ramach badań przygotowano sześć kompozycji o różnej zawartości poszczególnych składników, a następnie dokonano oceny wpływu dodatku regranulatu na własności reologiczne oraz wytrzymałościowe. Zmianę własności reologicznych określono na podstawie pomiaru masowego wskaźnika szybkości płynięcia, a wytrzymałościowe przez wyznaczenie wytrzymałości na rozciąganie i wydłużenia względnego oraz ilość uszkodzonych pęcherzy w próbie ściskania.
The paper deals with the problem of waste management of air bubble film by subjecting it to the regranulation process. Research was carried out on compositions comprising of a mixture of a regranulate and a linear low density polyethylene (LLDPE) and low density polyethylene (LDPE). Within the research, six compositions were prepared containing different content of the individual components, and then the impact of the regranulate additive was evaluated on the both the rheological and the mechanical properties. The change in rheological properties was determined by measuring the mass-flow rate, and by determining the tensile strength, elongation and the quantity of bubbles in the sample of damaged compression.
Źródło:
Przetwórstwo Tworzyw; 2014, [R.] 20, nr 1 (157), 1 (157); 82-87
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wirującego pola magnetycznego na kształt pęcherzy powietrza w sztucznym ścieku
Influence of rotating magnetic field on air bubble shape in artificial sewage
Autorzy:
Rakoczy, R.
Masiuk, S.
Powiązania:
https://bibliotekanauki.pl/articles/2070741.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sztuczny ściek
pęcherze gazowe
wirujące pole magnetyczne
artificial sewage
babble shape
rotating magnetic field
Opis:
W pracy podano wyniki badań wpływu wirującego pola magnetycznego na kształt pęcherzy powietrza rozpraszanych w sztucznym ścieku. Ilościową! jakościową ocenę kształtu pęcherza opisano entropią informacji.
Results of experimental investigations of a rotating magnetic field influence on the bubble aspect ratio in artificial sewage are given in the paper. A qualitative and quantitative assessment of bubble shape by means of the differential entropy method is presented.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 5; 95-96
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrodynamika przepływu pęcherzy powietrza przez warstwy cieczy o złozonych właściwościach reologicznych w kolumnie pulsacyjnej
Hydrodynamics of air bubble through rheologically complex liquids in a pulsating column
Autorzy:
Budzyński, P.
Orczykowska, M.
Dziubiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/2070601.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
barbotażowa kolumna pulsacyjna
stopień zatrzymania gazu w cieczy
bubble pulsating columns
gas hold-up
Opis:
W prezentowanej pracy przedstawiono wyniki badań wpływu intensywności pulsacji wprowadzonych do fazy ciągłej na stopień zatrzymania gazu dla przepływu powietrza przez warstwę modelowych płynów newtonowskich i nienewtonowskich w modelowym reaktorze pulsacyjnym.
Investigation results concerning an influence of pulsating intensity in-troduced to continuous phase on gas holdup for air bubbles flow through Newtonian and non-Newtonian liquids in a pulsating column are presented in the paper.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 6; 35-36
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of dissolved air on bubble attachment to highly oriented pyrolytic graphite
Autorzy:
Krasowska, M.
Sellapperumage, P. M. F.
Ralston, J.
Beattie, D. A.
Powiązania:
https://bibliotekanauki.pl/articles/110554.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bubble attachment
hydrophobic surface
van der Waals interaction
nanobubbles
dissolved air
Opis:
The effect of air, dissolved in 0.1 M KCl solution, on bubble attachment to the smooth hydrophobic surface of highly oriented pyrolytic graphite was studied. The stability of a wetting film in such a system is governed by surface forces, i.e. electrostatic and van der Waals interactions. At the high ionic strength investigated, the electric double layer forces are both weak and of short range, therefore the stability of the wetting film is dominated by van der Waals interactions. The Hamaker coefficient for the highly oriented pyrolytic graphite-KCl aqueous solution-air system is negative and hence van der Waals interactions are repulsive. A repulsive force should stabilize the wetting film, preventing its rupture and bubble attachment to the highly oriented pyrolytic graphite surface. Many experimental studies have found that wetting films are not stable at graphite or coal surfaces, and air bubbles attach. In the present experiments, the stability of the wetting films decreased with increasing amount of dissolved air. The time required for film drainage, rupture, and air bubble attachment was shortened by two orders of magnitude when the experiments were performed in air saturated 0.1 M KCl solution. This instability was attributed to an increasing number of nano- and submicron- bubbles nucleated at the graphite surface. The Hamaker coefficient across the air-KCl aqueous solution-air system is positive and hence van der Waals interactions are attractive, resulting in wetting film rupture and macroscopic air bubble attachment to a highly oriented pyrolytic graphite surface decorated with resident nano- and submicro-metre bubbles.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 1; 163-173
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental design of oily bubbles in oxidized coal flotation
Projekt eksperymentalnej flotacji olejowej utlenionego węgla
Autorzy:
Xia, W.
Yang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1849690.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
pęcherzyk oleisty
pęcherzyk powietrza
flotacja
węgiel utleniony
oily bubble
air bubble
oxidized coal
flotation
design
Opis:
Węgiel kamienny jest bardzo trudno wzbogacalny w procesie konwencjonalnej flotacji z zastosowaniem odczynników (kolektorów) olejowych. Badania miały na celu zaprojektowanie procesu flotacji, nazywanej flotacją olejową, do zwiększenia efektywności wzbogacania utlenionego węgla. Opisano proces flotacji olejowej. Badania dotyczyły porównania flotacji olejowej i konwencjonalnej do wzbogacania utlenionego węgla. Niektóre właściwości utlenionego węgla są podobne do właściwości węgla brunatnego. Odczynniki flotacyjne (kolektory) mają wielki wpływ na proces utlenionego węgla. Flotowalność utlenionego węgla z Taixi (Chiny) może być poprawiona przez aktywację powierzchni bądź rozdrabnianie węgla. Wstępna obróbka mikrofalowa może zwiększyć hydrofobowość węgla utlenionego poprzez zmniejszenie zawartości wilgoci w węglu utlenionym. Wyniki pokazują, że flotacja z pęcherzykami oleistymi jest bardziej efektywna, gdyż uzyskuje się substancję organiczną (koncentraty węgla) o wyższej zawartości substancji palnych niż w konwencjonalnym procesie flotacji. Wskaźnik efektywności procesu przy zastosowaniu flotacji olejowej jest również wyższy niż przy zastosowaniu konwencjonalnej flotacji.
Oxidized coal is difficult to float using oily collectors in the conventional flotation process. This study was aimed at designing the flotation process, namely the oily bubble flotation process, to float oxidized coal efficiently. The flotation process using oily bubbles is thoroughly described. The study compared using oily bubbles and air bubbles to float oxidized coal. Some properties of oxidized coal are similar to lignite. Therefore, oxidized coal should also be recovered efficiently. The flotation collectors have a great effect on the flotation process of oxidized coal. The floatability of Taixi oxidized coal can be improved by surface activation or grinding. The microwave pretreatment can improve the hydrophobicity of oxidized coal by decreasing the moisture content of oxidized coal. The flotation results show that the oily bubble flotation process can obtain higher combustible matter recovery than the conventional flotation process. The flotation efficiency index using oily bubbles is also higher than that using air bubbles.
Źródło:
Gospodarka Surowcami Mineralnymi; 2013, 29, 4; 129-135
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Shapes of an air Taylor bubble in stagnant liquids influenced by different surface tensions
Autorzy:
Lertnuwat, B.
Powiązania:
https://bibliotekanauki.pl/articles/265869.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
turbulencje
napięcie powierzchniowe
model Taylora
Dumitrescu-and-Taylor model
Froude number
surface tension
Taylor bubble
turbulence
Opis:
The aim of this work is to propose an empirical model for predicting shapes of a Taylor bubble, which is a part of slug flows, under different values of the surface tension in stagnant liquids by employing numerical simulations. The k - turbulence model was used in the framework of finite volume method for simulating flow fields in a unit of slug flow and also the pressure distribution on a Taylor bubble surface. Assuming that an air pressure distribution inside the Taylor bubble must be uniform, a grid search method was exploited to find an appropriate shape of a Taylor bubble for six values of surface tension. It was found that the shape of a Taylor bubble would be blunter if the surface tension was increased. This was because the surface tension affected the Froude number, controlling the flow around a Taylor bubble. The simulation results were also compared with the Taylor bubble shape, created by the Dumitrescu-and-Taylor model and former studies in order to ensure that they were consistent. Finally, the empirical model was presented from the simulation results.
Źródło:
International Journal of Applied Mechanics and Engineering; 2018, 23, 1; 79-90
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of viscosity on the shape of an air Taylor bubble in a stagnant liquid under turbulent condition in falling film
Autorzy:
Lertnuwat, B.
Powiązania:
https://bibliotekanauki.pl/articles/265385.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
lepkość
metoda Taylora
turbulencja
Dumitrescu model
viscosity
Taylor bubble
turbulence
Opis:
This work aims to find the influence of the liquid viscosity on the shape of an air Taylor bubble, rising up in a pipe column which contains the liquid under conditions that the liquid is stagnant and the Froude number is approximately equal to 0.35. Five liquid viscosities (from 0.001 to 0.01 Pa · s) were selected for being computationally investigated. An appropriate shape of a Taylor bubble, corresponding to each selected viscosity, was obtained by considering a pressure distribution of the air inside the bubble. Simulation results showed that the Taylor bubble shape would be thicker if the liquid viscosity was decreased. This could be explained by using the theory of the log-law velocity profile.
Źródło:
International Journal of Applied Mechanics and Engineering; 2019, 24, 1; 67-77
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-linear analysis of air pressure fluctuations during bubble departure synchronisation
Autorzy:
Dzienis, Paweł
Mosdorf, Romuald
Wyszkowski, Tomasz
Rafałko, Gabriela
Powiązania:
https://bibliotekanauki.pl/articles/386823.pdf
Data publikacji:
2019
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
bubble departure
alternative bubble departures
nonlinear methods of data analysis
Opis:
In the recent paper, non-linear methods of data analysis were used to study bubble departure synchronisation. In the experiment, bubbles were generated in engine oils from two neighbouring brass nozzles (with an inner diameter of 1 mm). During the experiment, the time series of air pressure oscillations in the air supply system and voltage changes on phototransistor were recorded. The analysis of bubble departure synchronisation was performed using a correlation coefficient. The following methods of non-linear data analysis are considered. Fast Fourier Transformation, autocorrelation, attractor reconstruction, correlation dimension, largest Lyapunov exponent and recurrence plot analysis were used to examine the correlation between bubbles behaviour and character of pressure fluctuations. Non-linear analysis of bubble departure synchronisation revealed that the way of bubble departures from two neighbouring nozzles does not depend simply on the character of pressure fluctuations in the nozzle air supply systems. The chaotic changes of the air pressure oscillations do not always determine the chaotic bubble departures.
Źródło:
Acta Mechanica et Automatica; 2019, 13, 3; 158-165
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ różnych odczynników flotacyjnych na prędkości pęcherzyków powietrza
Influence of different flotation reagents on rising velocity of air bubbles
Autorzy:
Małysa, E.
Iwańska, A.
Powiązania:
https://bibliotekanauki.pl/articles/349940.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
prędkość pęcherzyka
adsorpcja
odczynnik flotacyjny
bubble velocity
adsorption
flotation reagent
Opis:
W pracy przedstawiono wyniki badań wpływu stężenia odczynników flotacyjnych, stosowanych do flotacji węgla, na prędkości wypływających pęcherzyków powietrza. Do wyznaczania prędkości pęcherzyka powietrza w roztworach odczynników zastosowano nową, prostą i tanią metodę do detekcji zanieczyszczeń organicznych (zwana PMDZ). Pomiary wykonano dla roztworów 1-heksanolu, oktanolu, montanolu, flotanolu i centrifroth. Stwierdzono, że prędkości wypływającego pęcherzyka powietrza maleją wraz ze wzrostem stężenia wszystkich badanych odczynników. Z wartości 35 cm/s dla wody destylowanej prędkość maleje do ok. 16 cm/s dla wysokich stężeń wszystkich badanych odczynników. Jednakże minimalne stężenia potrzebne dla tego obniżenia prędkości są cechą specyficzną poszczególnych odczynników. Dalsze zwiększanie stężenia odczynnika nie wpływa na prędkość pęcherzyka gdyż nastąpiło już całkowite unieruchomienie powierzchni międzyfazowej pęcherzyka powietrza.
The paper presents results of studies on influence of the flotation reagents, used in the coal flotation, on rising velocity of the air bubbles. The bubble rising velocity was determined using a novel Simple Physicochemical Metod of Detection (SPMD) organic contaminations in water. The measurements were carried out for octanol, montanol, flotanol, centifroth and 1-hexsanol solutions of different concentrations. It was found that the rising velocities of the bubbles were decreasing with increasing concentration of the flotation reagents studied. The bubble velocity was lowered from the value of 35 cm/s in distilled water to ca. 16 cm/s at high concentrations of the reagents studied. However, the minimum concentration needed for this velocity diminishing of the rising bubbles is a specific feature of the reagents studied. Further increasing of the reagent concentration had no influence on the bubble rising velocity, what means that the bubble interface had been already immobilized.
Źródło:
Górnictwo i Geoinżynieria; 2009, 33, 4; 189-199
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Dynamics of Liquid Movement Inside the Nozzle During the Bubble Departures for Low Air Volume Flow Rate
Autorzy:
Dzienis, P.
Mosdorf, R.
Wyszkowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/386993.pdf
Data publikacji:
2012
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
pęcherze gazowe
analiza nieliniowa
bubbles
nonlinear analysis
Opis:
The main aim of investigation was to analyze the influence of liquid movement inside the nozzle on the dynamics of bubble departure. Dynamics of such process decides about the periodic and aperiodic bubble departures. During the experiment it has been simultaneously recorded: changes of the depth of the nozzle penetration by liquid, air pressure and shape of bubble trajectory directly over the nozzle (in the length of 30 mm). The air volume flow rate was in the range 0.00632 - 0.0381 l/min. There has been shown that for all air volume flow rates the time periods with periodic and aperiodic bubble departures have been occurred. Duration of these intervals varies with the air volume flow rate. It has been found that the aperiodic bubble departures begin when the time of bubble growth increases. The changes of maximum values of liquid position inside the nozzle are associated with changes of the shape of bubble trajectories. There has been shown that straightens of the trajectory precedes the appearance of periodical or aperiodic time period of bubble departures. The aperiodic bubble departures are accompanied by a significant deviation of bubble trajectory from a straight line. The correlation dimension analysis shown that three independent variables are enough to describe the behaviour of liquid movement inside the nozzle. These independent variables may be: liquid velocity, liquid position in the nozzle and gas pressure in the nozzle.
Źródło:
Acta Mechanica et Automatica; 2012, 6, 3; 31-36
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chaotic air pressure fluctuations during departure of air bubbles from two neighbouring nozzles
Autorzy:
Mosdorf, R.
Wyszkowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/240151.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dynamika
dynamika chaotyczna
pęcherze
bubble chain
bubble dynamics
chaotic dynamics
Opis:
In the experiment, bubbles were generated from two brass nozzles with inner diameters of 1.1 mm. They were submerged in the glass tank filled with distilled water. There have been measured the air pressure fluctuations and the signal from the laser-phototransistor sensor. For analysis of the pressure signal the correlation (the normalized cross - correlation exponent) and non-linear analyses have been used. It has been shown that hydrodynamic interactions between bubbles can lead to bubble departure synchronization. In this case the bubble departures become periodic. The results of calculation of correlation dimension and the largest Lyapunov exponent confirm that hydrodynamic bubble interactions observed for 4 mm spacing between nozzels cause the periodic bubble departures from two neighbouring nozzles.
Źródło:
Archives of Thermodynamics; 2012, 33, 1; 123-137
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of salinity on the underwater noise generated by small scale air entrainment events
Autorzy:
Szuszkiewicz, J.
Klusek, Z.
Gorska, N.
Powiązania:
https://bibliotekanauki.pl/articles/332616.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
underwater noise
air entrainment
bubbles
bubble clusters
Opis:
Some part of the energy released in the wave breaking process is transformed into the energy of the noise. This sound depends on the water properties, however, there is a lack of reliable data concerning the underwater noise generated by less energetic events. The aim of this study was to understand the impact of salinity on the underwater noise produced during small scale air entrainment events, typical for low wind speed conditions. The tipping trough experiment was performed in a small tank to generate the small scale air injections. Four, linearly placed hydrophones HTI-96-MIN were used to record the acoustic noise accompanying this phenomenon. The bubble plume development, and underwater noise spectra, were compared for salty and fresh water. The potential energy of the modeled events resulted in different spectra, and salinity played an essential role in the emitted underwater noise.
Źródło:
Hydroacoustics; 2017, 20; 167-172
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relationships between atmospheric positive electric charge densities and gas bubble concentrations in the Baltic Sea
Autorzy:
Klusek, Z.
Wiszniewski, A.
Jakacki, J.
Powiązania:
https://bibliotekanauki.pl/articles/48266.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
wind speed
gas bubble
concentration
atmospheric electricity
Baltic Sea
air ion
brackish water
Opis:
Simultaneous measurements of bubble density in the sea subsurface and positive ions in the lower atmosphere were performed in the Baltic Sea in the summer of 1999. Bubbles in two size ranges, around 27 and 100 μm, were measured acoustically. Airborne positive charge was measured with a Gerdien instrument. Observed concentrations of air ions varied from 60 cm−3 up to 600 cm−3. The relative role of bubbles and wind speed on the positive air ion concentrations over the brackish water of the Baltic Sea is discussed. The parameters of a model of a log-log dependence between charge concentration and bubble density are calculated. The correlation functions between time series of concentrations of positive charges over the sea and gas bubbles averaged over a depth range from 0.4 to 4 m and wind speed are presented. There was zero lag between the cross-correlation maxima of charge and bubbles, but there was a phase lag of one and a half hours between charge and wind speed.
Źródło:
Oceanologia; 2004, 46, 4
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation of air/water interface in mixed aqueous solutions of KCl, NaCl, and DAH
Autorzy:
Gungoren, Can
Powiązania:
https://bibliotekanauki.pl/articles/110641.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bubble coalescence
surface tension
KCl
NaCl
DAH
Opis:
Flotation of soluble salts such as borax, potash, and trona is carried out in their saturated solutions. The high ion concentration of the flotation suspension can affect the floatability of the minerals as well as the coalescence behaviors of the bubbles. The bubble coalescence can be inhibited in the presence of dissolved ions at high ion concentrations as well as with the use of surfactants. In this study, the effect of the mixtures of KCl, NaCl, and dodecyl amine hydrochloride (DAH) on air/water interface was investigated with surface tension and bubble coalescence time measurements for potash flotation. The surface tension measurements indicated that lower surface tension values obtained with mixed KCl and NaCl solutions than their single solutions. In addition, the surface tension of the mixed KCl and NaCl solutions increased with the NaCl and the ionic strength of the solution. The dynamic surface tension measurements indicated that while ion adsorption on air/water interface was so fast, DAH molecules required more time for adsorption probably related to the viscosity of the solution. In addition, the bubble coalescence time measurements showed that the bubble coalescence could be inhibited with the use of DAH in the absence and presence of KCl and NaCl. In the absence of DAH, the bubble coalescence time was determined as 100 ms, 270 ms, and 650 ms, respectively for 100% KCl, 100% NaCl, and 50%KCl+50% NaCl salt solutions. Therefore, the trend in the success of the salt solutions for the inhibition of bubble coalescence can be written as 100%KCl<50%KCl+50%NaCl<100% NaCl according to the bubble coalescence time. The results of this study indicated that there was no clear relationship between the surface tension and the inhibition of the bubble coalescence. However, the bubble coalescence time measurements showed that while the bubble coalescence time was 650 ms in the presence of Na+ ions, it was 100 ms in the presence of K+ ions 100 ms. It can be concluded from the results obtained from this study that the bubble coalescence phenomena may be managed by the specific ion pairing types in solutions which significantly affect the flotation recovery of minerals.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 5; 1259-1270
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of air flow rate and froth depth on the flotation performance : an industrial case study in a 10 m3 cell
Autorzy:
Ostadrahimi, Mahdi
Farrokhpay, Saeed
Pirmoradi, Saeed
Noparast, Mohamad
Powiązania:
https://bibliotekanauki.pl/articles/2146876.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
entrainment
bubble coalescence
air flow rate
froth depth
Opis:
The main purpose of the froth zone in flotation is to transport all the valuable particles from the pulp zone into the concentrate. However, in practice, a complete recovery of these particles is rarely achieved since some of them are detachment from the bubbles and return to the pulp zone. While this is an important topic in the mineral flotation industry, the previously published papers are mainly limited to small laboratory scales. Therefore, this study aimed to examine the effect of two main flotation variables (air flowrate and froth depth) on the flotation of iron ore in a 10 m3 industrial scale cell. It was found that, when the air flowrate increased from 45 to 146 m3/h, the velocity of the bubble coalescence also increased. In addition, when the froth depth increased from 5 to 30 cm, the product grade showed on average 2 unit increase (for instance, from 12% to 14%) due to the detachment of particles and liquid drainage. It was also found that the flotation concentrates recovery decreased with the increasing froth depth and air flowrate.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 5; art. no. 154852
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrodynamics of Pilot Plant Scale Airlift Reactor in Presence of Alcohols
Autorzy:
Nandi, S.
Jaju, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/779781.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
air-lift reactor
hydrodynamics
gas hold-up
bubble
multiphase flow
surfactant
Opis:
The overall gas hold-up of a pilot plant scale internal loop airlift reactor was studied in presence of different alcohols in varied concentration. It has been observed that these simple alcohols can enhance overall gas hold-up of the airlift assembly possibly due to formation of protective thin layer over smaller gas bubbles thereby reducing chance of their coalescence. As the alcohols can be used as food source for the micro organisms present in the system, this green and environment friendly process have potential to replace usage of hazardous surfactants often used for enhancing overall hold-up in order to obtain desired mass transfer characteristics. An empirical relationship encompassing overall gas hold-up of the reactor as a function of superficial gas velocity and alcohol concentration is also developed.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 3; 118-123
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Określenie wpływu prędkości pęcherzyków powietrza na wyniki flotacji węgla
Influence of velocity of the air bubbles on results of the coal flotation
Autorzy:
Małysa, E.
Iwańska, A.
Powiązania:
https://bibliotekanauki.pl/articles/349496.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
1-heksanol
techniczne odczynniki flotacyjne
flotacja węgla
prędkość pęcherzyka
1-hexanol
technical reagent
coal flotation
bubble velocity
Opis:
W pracy przedstawiono wyniki badań wpływu prędkości pęcherzyków powietrza na wyniki flotacji węgla w roztworach odczynników 1-heksanolu i odczynników technicznych centifroth, flotanolu, montanolu i oktanolu. Odczynniki te są związkami powierzchniowo czynnymi i adsorbują się na granicach międzyfazowych ziarno mineralne-roztwór i roztwór-powietrze. Dzięki adsorpcji tych odczynników na granicach faz roztwór-gaz prędkość pęcherzyków powietrza zmniejsza się od wartości 32,7 cm/s w wodzie wodociągowej do wartości ok. 16 cm/s dla wszystkich badanych odczynników. Powyżej pewnego stężenia odczynników prędkość nie zmienia się. Wartości tych stężeń są różne dla badanych odczynników. Dla heksanolu potrzeba 100 razy większą ilość (10-1 g/dm3) w stosunku do ilości (10-3 g/dm3) odczynników technicznych, powyżej których prędkości pęcherzyków już nie zmieniają się pomimo wzrostu ich ilości. Korelację między wynikami flotacji a prędkością pęcherzyka powietrza zaobserwowano dla roztworów 1-heksanolu. Wraz ze wzrostem stężenia maleją prędkości pęcherzyków powietrza i rosną uzyski części palnych i lotnych w koncentratach flotacyjnych. W przypadku odczynników technicznych przy ich najniższych dawkach 250 g/Mg stosowanych w procesie flotacji pęcherzyki powietrza osiągały już stałą prędkość co pokazuje, że już przy tej ilości odczynników powierzchnia międzyfazowa roztwór-powietrze (powierzchnia pęcherzyka) zostaje już całkowicie unieruchomiona.
The paper presents results of studies on influence of the air bubbles velocity on results of the coal flotation in solutions of 1-hexanol and the technical reagents; centifroth, flotanol, montanol and octanol. The reagents applied are the surface active compounds and therefore they adsorb at the solution-mineral grain and solution-gas interfaces. Due to their adsorption at the solution-gas interface the velocity of the rising bubbles can be lowered from 32,7 cm/s in tap water to ca. 16 cm/s in solutions of the reagents studied. For each of the reagents studied there was determined a definite concentration above which the bubble velocity started to be constant. These concentrations are different for the reagents studied and for example in the case of 1-hexanol this concentration (10-1 g/dm3) is 100 times higher than that one (10-3 g/dm3) needed in the case of the technical reagents. A correlation between variations of the flotation results and the bubble velocity was observed in the case of 1-hexanol. The coal recovery was increasing when the bubble velocity was decreasing with 1-hexanol concentration. In the case of the technical reagents the bubble velocity was lowered to the value of ca. 16-17 cm/s at their lowest dosage of 250 g/Mg applied in the flotation tests. It indicates that even this low dosage of the technical reagents was sufficient for a complete retardation of fluidity of the solution-gas (bubble surface) interface.
Źródło:
Górnictwo i Geoinżynieria; 2010, 34, 4/1; 165-174
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the gas phase in flotation process. Part 1, Experimental determination of the volume of air bubbles in the pneumo-mechanical flotation machine
Analiza fazy gazu w procesie flotacji. Część 1, Eksperymentalne określenie ilości pęcherzyków powietrza we flotowniku pneumatyczno-mechanicznym
Autorzy:
Młynarczykowska, A.
Nyrek, A.
Oleksik, K.
Powiązania:
https://bibliotekanauki.pl/articles/971073.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
flotacja
dyspersja pęcherzyków
rozkład wielkości pęcherzyków
flotation
bubbles dispersion
bubble size population
Opis:
Problem of bubble mineralization, representing the most important flotation stage and resulting in measurable outcomes described by flotation concentrate yield, is of a key importance research problem from practical point of view. Most of publication in the literature refer to the global study on the impact of selected factors (size of the bubbles, the particle coverage ratio with flotation reagents, hydrophobic properties of particles) on the results of flotation. A decisive role in this process is played by dispersive properties of the gas phase, which is the main factor affecting the results of upgrading process, defining the operation conditions of the flotation machine or the degree of aeration of flotation pulp. The paper presents the results of the assessment of the influence of selected physical parameters on the size of air bubbles generated in the working chamber of pneumatic-mechanical type of flotation machine. The variables, directly related to the size and the way the dispersion of air bubbles, were the dispensed amount of air and the number of rotor’s rotation at fixed physicochemical conditions. These parameters were determined in order to characterize the dispersion of air in the two-phase liquid-gas. The study was carried out on the unique device, with using video recording techniques and image analysis.
Problem mineralizacji pęcherzyków, będący najważniejszym etapem flotacji i uzyskujący wymierne efekty widoczne przez wydajność koncentratu, jest kluczowym tematem badań z praktycznego punktu widzenia. Większość publikacji na ten temat nawiązuje do ogólnych badań sprawdzających wpływ wybranych cech (rozmiar pęcherzyków, stosunek pokrycia cząsteczek z odczynnikami flotacyjnymi, hydrofobiczne właściwości cząsteczek) na wyniki flotacji. Decydującą rolę w procesie odgrywają właściwości rozpraszające w fazie gazu, które są głównym czynnikiem wpływającym na wyniki wzbogacania procesu, definiowanie warunków operacyjnych maszyny flotacyjnej oraz na stopień napowietrzenia pulpy flotacyjnej. Artykuł przedstawia wyniki określające wpływ wybranych fizycznych parametrów na rozmiar pęcherzyków powietrza, które tworzą się we włączonej komorze pneumatyczno-mechanicznego typu maszyny flotacyjnej. Zmienne, które bezpośrednio powiązane są z wielkością i sposobem dyspersji pęcherzyków powietrza, były wartościami podzielonymi na ilość powietrza oraz liczbę obrotów w wirniku przy określonych warunkach fizyko-chemicznych. Parametry zostały tak określone, aby dobrze opisać właściwości dyspersji powietrza w dwóch fazach płynu – gazu. Badania przeprowadzono przy pomocy specjalnego urządzenia z użyciem technik nagrywania wideo oraz analizą obrazu.
Źródło:
Inżynieria Mineralna; 2015, R. 16, nr 1, 1; 181-188
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies