Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Meng, X." wg kryterium: Wszystkie pola


Wyświetlanie 1-12 z 12
Tytuł:
Life assessment of marine ethylene propylene rubber power cables based on hardness retention rate
Autorzy:
Meng, X.
Wang, Z.
Li, G.
Powiązania:
https://bibliotekanauki.pl/articles/141470.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ethylene propylene rubber (EPR)
nondestructive
hardness retention rate
elongation at break retention rate (EAB %)
termination index
Opis:
The lifetime of ethylene propylene rubber (EPR) insulated cables will decrease because of complex aging processes. From the safety perspective, insulation condition assessment of the cable is essential to maintain an efficient and reliable operation. As a nondestructive and online evaluation method, a hardness retention rate was used to estimate the lifetime of cable. First, accelerated thermal aging tests in the laboratory were performed to measure the elongation at break retention rate (EAB%) and a hardness retention rate at different temperatures. Second, the aging values were processed by the Arrhenius equation and time temperature superposition to assess aging lifetime of insulation at different temperatures and end levels. As the insulation condition assessment of the cable by hardness retention test has no approved standard, the EAB% data were correlated with hardness retention to provide an evaluation basis. The results show that when EAB% picks out the time corresponding to a certain amount of 50% degradation, 10% of hardness retention was chosen as the termination index.
Źródło:
Archives of Electrical Engineering; 2017, 66, 3; 475-484
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Ships Safety Control System
Autorzy:
Han, X. J.
Meng, X. Y.
Wang, Z. W.
Powiązania:
https://bibliotekanauki.pl/articles/117442.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Safety of Navigation
ships safety
Control System
Ships Safety Control System
Ship Accidents
Human Factor
Control Strategy
Accident Precaution
Opis:
The proportion of main reasons of ships accidents to the whole reasons is discussed in the paper. Among these reasons, human factors are in the majority. So a method to prevent wrong orders sent by a navigator is laid emphasis on. On the basis of this, a ships safety control system is studied. The construction and control principle of the ships safety control system, as well as control strategy, implementation method and key technology are elaborated in the paper.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2009, 3, 1; 19-22
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on E.C. Bingham constitutive model of rock under impact load for deep well
Wykorzystanie modelu E.C. Binghama przy badaniu skał narażonych na obciążenia udarowe w górnictwie podziemnym
Autorzy:
Zhao, G. M.
Xie, L. X.
Meng, X. R.
Powiązania:
https://bibliotekanauki.pl/articles/348692.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
SHPB
teoria odkształceń ciągłych
statystyczna teoria odkształceń
równanie powstawania odkształceń
model E.C. Bingham'a
continuum damage theory
statistical damage theory
constitutive equation of damage excess stress model
E.C. Bingham constitutive model
Opis:
The soft rock materials have special dynamic properties in deep mining. Their dynamic compression tests are performed with experimental system of Split Hopkinson Pressure Bar (SHPB). The results of experiment indicate that the dynamic stress-strain curves of rock materials are of distinct plastic yield characteristics. Based on modified excess stress model, according to the function relationship between strain, strain rate and, to simplify constitutive equation of modified excess stress model with dimensionless analysis, the simplified constitutive equation of modified excess stress model is obtained; And then, continuum damage theory and statistical damage theory are incorporated into the simplified constitutive equation of modified excess stress model account for the influence of damage to dynamic strength, the simplified constitutive equation of damage excess stress model is built up. The simplified constitutive functions are fitted out respectively on the basis of the experimental data. There is a good coherence between the fitting stress-strain curves and the experimental stress-strain curves.
Miękkie materiały skalne w kopalniach głębokich posiadają specyficzne właściwości dynamiczne. Wykonano testy kompresji dynamicznej przy zastosowaniu urządzenie kompresyjnego Hopkinsona (Split Hopkinson Pressure Bar SHPB). Wyniki przeprowadzonych badań wykazały, krzywe wykresu rozciągania skał mają charakterystykę typową dla materiałów upłynnionych. W oparciu o model rozkładu naprężeń, zgodnie z funkcją zależności pomiędzy typem odkształcenia a jego szybkością, celem uproszczenia równania odkształcenia zmodyfikowanego przy pomocy analizy bezwymiarowej, otrzymano równanie opisujące model naprężeń zmodyfikowanych. Następnie wykorzystano teorię ciągłego kontinuum oraz teorię statystyki odkształceń w równaniu odkształcenia zmodyfikowanego celem ustalenia zależności z badanym modelem. Uproszczone w ten sposób funkcje skorelowano na podstawie otrzymanych danych doświadczalnych. Ustalono wysoką spójność pomiędzy krzywymi teoretycznymi i doświadczalnymi.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 489-500
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Cycle Sputtering Deposition on the Properties of Cu₂ZnSnS₄ Thin Films
Autorzy:
Sun, Y.
Yao, B.
Long, D.
Meng, X.
Liu, L.
Hua, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1398930.pdf
Data publikacji:
2016-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.40.Fy
Opis:
Three kinds of precursor thin films with stacking orders of Cu/Sn/ZnS, Cu/Sn/ZnS/Cu/Sn/ZnS and Cu/Sn/ZnS/Cu/Sn/ZnS/Cu/Sn/ZnS were prepared by magnetron sputtering and annealed with sulfur powder. The microstructure, morphology and optical properties of thin films were investigated by X-ray diffraction, the Raman scattering, scanning electron microscopy and UV-visible spectrophotometer. The increase of cycle number decreases the sulfurizing temperature of the formation of Cu₂ZnSnS₄ phase. Chemical composition can be controlled by cycle sputtering deposition. After sulfurizing at 500°C, the particle size and the band gap increase with increasing cycle number.
Źródło:
Acta Physica Polonica A; 2016, 129, 6; 1169-1172
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Annealing Temperature and Ambient on Formation, Composition and Bandgap of $Cu_2ZnSnS_4$ Thin Films
Autorzy:
Sun, Y.
Yao, B.
Meng, X.
Wang, D.
Long, D.
Hua, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1205220.pdf
Data publikacji:
2014-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.55.-a
Opis:
Amorphous Cu-Zn-Sn-S precursor films were prepared by sol-gel and spin-coating with copper chloride, zinc chloride, tin chloride and thiourea solutions as starting materials. A $Cu_2ZnSnS_4$ film with kesterite structure and a small amount of chlorine formed when the precursor was annealed under Ar ambient at temperature above 200°C, but its atomic ratios of Cu:Zn:Sn:S far deviated from stoichiometric ratios of the $Cu_2ZnSnS_4$. However, when the precursor films were annealed with sulfur powder together at temperatures between 360 and 480°C, the CZTS film containing a very small amount of Cl formed, and its atomic ratio change little for Cu, Zn, and Sn, increases for S and decreases for Cl with increasing temperature. When the temperature is 480°C, a CZTS only has Cu, Zn, Sn, and S element is fabricated, and the atomic ratio of Cu:Zn:Sn:S is near the stoichiometric ratio. The bandgap of the CZTS decreases with increasing annealing temperature. The mechanisms of the formation and the properties of the CZTS are suggested in the present work.
Źródło:
Acta Physica Polonica A; 2014, 126, 3; 751-756
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crystallization Process of $Fe_{75}Co_5Zr_{10}B_{10}$ Amorphous Alloy
Autorzy:
Sun, Y.
Zuo, B.
Wang, D.
Meng, X.
Liu, J.
Wang, L.
Hua, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1399278.pdf
Data publikacji:
2013-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.43.Dq
64.60.My
Opis:
$Fe_{75}Co_5Zr_{10}B_{10}$ amorphous alloy prepared by melt-spinning was annealed at various temperatures. The thermal property and microstructures were investigated by differential thermal analysis, X-ray diffraction, and transmission electron microscopy. The crystallization process of $Fe_{75}Co_5Zr_{10}B_{10}$ amorphous alloy is complex. The α-Fe phase precipitates from the amorphous matrix in the initial stage of crystallization. The α-Mn type (χ) phase precipitates at 570°C, but transforms to α-Fe phase and the Laves C14(λ) phase at higher temperature. In the final stage of crystallization, $Fe_3Zr$, $Fe_2Zr$, and unknown phases are observed and the λ-phase disappears. The α-Fe phase preferentially nucleates after annealing at 530C for 10 min and the χ-phase preferentially nucleates after annealing at 600C for 10 min. The nucleation barrier of χ-phase is larger than that of α-Fe phase. The local structure of χ-phase is more similar to amorphous phase.
Źródło:
Acta Physica Polonica A; 2013, 124, 4; 685-687
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of polymer microcomponents using CO2 laser melting technique
Wytwarzanie mikroelementów polimerowych z zastosowaniem techniki topienia laserem CO2
Autorzy:
Tan, W. S.
Zhou, J. Z.
Huang, S.
Zhu, W. L.
Meng, X. K.
Powiązania:
https://bibliotekanauki.pl/articles/947347.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
molding
polymer microcomponents
CO2 laser
irradiation
numerical simulation
formowanie
mikroelementy polimerowe
laser CO2
napromienianie
symulacja numeryczna
Opis:
A new method of laser melting molding to produce high-efficiency and high-quality polymer microcomponents was proposed. Numerical simulation was used to analyze the temperature changes of polymer melt during the laser irradiation process. An orthogonal experiment was also employed to investigate the factors influencing molding accuracy. The molding experiments were conducted on molds with various degrees of roughness, and the surface quality of the molded pieces was tested. The simulation analysis and experimental results showed that the laser power plays a critical role in improving the repetition accuracy. The next factors are irradiation time and mold temperature, followed by molding force. Optimized technological parameters (1.2 W of laser power, 6 mm of laser beam width, 6 s irradiation time, 150 N molding force, and 80 °C mold temperature) were applied to obtain a molded pieces with high repetition accuracy and a microstructure dimensional deviation of less than 1 µm. Using a mold with lower surface roughness provides that we can obtain a molded piece with lower roughness, the roughness difference between the mold and the molded piece was less than 0.012 µm.
Zaproponowano nową metodę formowania mikroelementów polimerowych z zastosowaniem topienia laserowego, zapewniającą wysoką wydajność oraz dobrą jakość wytwarzanych mikroelementów. Istotnym parametrem procesu, wpływającym na jakość formowanych elementów, jest temperatura stopu polimeru. Do analizy zmian tej temperatury pod wpływem napromieniania laserem zastosowano symulację numeryczną. Zastosowano także ortogonalny plan eksperymentu w celu zbadania czynników wpływających na dokładność formowania. Formowania przeprowadzono z użyciem form o różnych stopniach chropowatości i zbadano jakość powierzchni mikroelementów. Analiza wyników symulacji i badań eksperymentalnych wykazała, że moc lasera odgrywa kluczową rolę w uzyskaniu powtarzalnej dokładności. Kolejnymi czynnikami są czas napromieniowania i temperatura formy oraz siły formujące. Zoptymalizowane parametry technologiczne (moc lasera 1,2 W, szerokość wiązki lasera 6mm, czas napromieniania 6 s, siła formująca 150 N i temperatura formowania 80 °C) zastosowano do formowania elementów z powtarzalną dużą dokładnością odtwarzania wymiarów (odchylenia wymiarów nie przekraczały 1 µm). Użycie form o mniejszej chropowatości powierzchni pozwalało także uzyskać mniejszą chropowatość mikroelementów, przy czym różnica chropowatości formy i otrzymanego elementu była mniejsza niż 0,012 µm.
Źródło:
Polimery; 2015, 60, 3; 192-198
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Early Miocene microtoid cricetid rodent from the Junggar Basin of Xinjiang, China
Autorzy:
Maridet, O.
Wu, W.
Ye, J.
Meng, J.
Bi, S.
Ni, X.
Powiązania:
https://bibliotekanauki.pl/articles/21577.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Opis:
Microtoid cricetids are widely considered to be the ancestral form of arvicoline rodents, a successful rodent group includ− ing voles, lemmings and muskrats. The oldest previously known microtoid cricetid is Microtocricetus molassicus from the Late Miocene (MN9, ca. 10–11 Ma) of Europe. Here, we report a new microtoid cricetid, Primoprismus fejfari gen. et sp. nov., from the Junggar Basin of Xinjiang, northwestern China. The rodent assemblage found in association with this specimen indicates a late Early Miocene age, roughly estimated at 18–17 Ma, and thus more than 6 million years older than M. molassicus. While morphological comparisons suggest that the new taxon is most closely related to M. molas− sicus, it differs from the latter in a striking combination of primitive characters, including a lower crown, smaller size, a differentiated posterolophid and hypolophid, a faint anterolophid, the absence of an ectolophid, and the presence of a stylid on the labial border of the tooth. Arid conditions prevailing across the mid−latitude interior of Eurasia during the Early Miocene, enhanced by the combined effects of the Tibetan uplift and the gradual retreat of the Tethys Ocean, likely played a role in the appearance of grasslands, which in turn triggered the evolution of microtoid cricetids and, ultimately, the origin of arvicoline rodents.
Źródło:
Acta Palaeontologica Polonica; 2014, 59, 1
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Buckling analysis of airframe jointed panel under combined loading
Autorzy:
Li, X.
Jia, D.
Meng, C.
Powiązania:
https://bibliotekanauki.pl/articles/264575.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
wytrzymałość
wyboczenie
obciążenie
strength
buckling analysis
jointed panel
combined loading
Opis:
The complicated relationship of the high order static indeterminate structure will lead to a lot of calculation work. The strength analysis of the structure is very difficult. In aircraft design phase, a structural simplified method should be used to model the load characteristics of the structure. In the paper, the buckling analysis of airframe jointed panel is investigated under combined loading and the effect of jointed position to buckling load is also presented. For the buckling analysis of special joined structure, one new method which is better than traditional methods is described.
Źródło:
International Journal of Applied Mechanics and Engineering; 2018, 23, 4; 1035-1042
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tests and analyses on mechanical characteristics of dwarf-dense-early major cotton variety stalks
Autorzy:
Liang, R.
Chen, X.
Zhang, B.
Peng, X.
Meng, H.
Jiang, P.
Li, J.
Zhou, P.
Kan, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2082915.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
cotton stalk
dwarf-dense-early
multiple factors
mechanical characteristics
Opis:
The influence of the variation in water content, sampling location and loading speed on the shearing and across-compression mechanical characteristics of dwarf-denseearly major cotton variety stalks was analysed. The second-order response models of the factors vs. the maximum shear force and critical across-compression failure force were built using the response surface methodology. Besides, the sampling location and water content have a significant influence over the maximum shear force and critical across-compression failure force, especially the sampling location. Both the maximum shear force and critical across-compression failure force reach a theoretical maximum when the water content is 10%, the sampling location is the lower part and the loading speed is 40 mm min-1. When the sampling location is the lower part, optimization is carried out assuming the theoretical minimum of the maximum shear force and critical across-compression failure force as the optimization target. In this case, the loading speed is 20 mm min-1, while the water content is between 30 and 50%. This indicates that the parameter range requires a low power consumption during the crushing of film residue mixtures. The test data can provide some theoretical references for the technical research and equipment development for the crushing of film.
Źródło:
International Agrophysics; 2020, 34, 3; 333-342
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Characterization of Metal Derivatives of 1,1,2,2-Tetranitraminoethane (TNAE)
Autorzy:
Zhu, C.
Meng, Z.
Xu, Z.
Liu, W.
Liu, Y.
Shi, X.
Xie, T.
Powiązania:
https://bibliotekanauki.pl/articles/358571.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
Ionic compound
1,1,2,2-tetranitraminoethane
thermal property
safety performance
thermal decomposition kinetics
Opis:
The introduction of anions and cations into energetic materials can significantly improve their physicochemical and energetic properties. The K, Zn, Ba, Cu and Pb salts of 1,1,2,2-tetranitraminoethane (TNAE) were synthesized using TNAE as the starting material, and were characterized by IR spectroscopy, NMR spectroscopy and elemental analysis. All of the energetic salts exhibited relatively high thermal stabilities (decomposition temperatures ranging from 195.1 °C to 279.3 °C) and high densities (ranging from 2.1 g·cm–3 to 3.7 g·cm–3). It was demonstrated that the introduction of metal ions conveys better thermal stability than covalent TNAE itself. More importantly, the Zn, Ba and Cu salts exhibited good thermal stability, high density, low sensitivity, and therefore have the potential to be a new class of insensitive, highly energetic explosives for practical applications.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 3; 435-444
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluating the association between effort-reward imbalance and suboptimal health status among hospital nurses: a cross-sectional study
Autorzy:
Yu, Leilei
Liu, Weiting
Wang, Jingzheng
Jin, Ziyao
Meng, Ruoyu
Wu, Zhiyuan
Zheng, Yuanyuan
Guo, Zheng
Powiązania:
https://bibliotekanauki.pl/articles/31341044.pdf
Data publikacji:
2024-05-20
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
stress
nurses
occupational health
hospital
effort-reward imbalance
suboptimal health status
Opis:
Objectives Occupational stress is a common complaint in nurses, who perceived more sense of effort-reward imbalance (ERI). Suboptimal health status (SHS) is a state between health and disease. However, the correlation between ERI and SHS is unclear. Therefore, the aim of this study was to examine the prevalence of SHS and ERI and evaluate the relationship between ERI and SHS in clinical nurses by a cross-sectional study. Material and Methods The current cross-sectional study was conducted through an online survey at Dongping People’s Hospital in China. A total of 633 completed surveys were received. Effort-reward imbalance was measured by subscales of the ERI questionnaire. SHS was measured by the Suboptimal Health Status Questionnaire – 25 (SHSQ-25). The relationship between ERI and SHS in nurses was subsequently assessed by Spearman’s correlation coefficient and logistic regression model. Results The mean age of the optimal health status (OHS) group (M±SD 26.3±7.3 years) was younger than the SHS group (M±SD 30.3±6.9 years). The prevalence of SHS was 54.5% (345/633). Female nurses aged ≥30 years, a junior college or university graduate educational level, smokers, and nurses without regular exercise were at a higher risk of SHS. In Spearman’s correlation analysis, ERI reflected by the effort-reward ratio was correlated with SHSQ-25 score (r = 0.662, p < 0.001). In logistic regression, ERI was strongly associated with SHS after potential confounding factors adjusting (OR 27.924, 95% CI 22.845–34.132). Conclusions The prevalence of SHS was significantly high in clinical nurses. Administrators should pay more attention to health status of female nurses aged ≥30 years, with a junior college or bachelor’s degree, smoking, and without regular exercise to reduce the SHS and ERI.
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2024, 37, 2; 165-175
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies