The influence of the variation in water content,
sampling location and loading speed on the shearing and
across-compression mechanical characteristics of dwarf-denseearly
major cotton variety stalks was analysed. The second-order
response models of the factors vs. the maximum shear force and
critical across-compression failure force were built using the
response surface methodology. Besides, the sampling location and
water content have a significant influence over the maximum shear
force and critical across-compression failure force, especially the
sampling location. Both the maximum shear force and critical
across-compression failure force reach a theoretical maximum
when the water content is 10%, the sampling location is the lower
part and the loading speed is 40 mm min-1. When the sampling
location is the lower part, optimization is carried out assuming
the theoretical minimum of the maximum shear force and critical
across-compression failure force as the optimization target.
In this case, the loading speed is 20 mm min-1, while the water
content is between 30 and 50%. This indicates that the parameter
range requires a low power consumption during the crushing of
film residue mixtures. The test data can provide some theoretical
references for the technical research and equipment development
for the crushing of film.
Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies
Informacja
SZANOWNI CZYTELNICY!
UPRZEJMIE INFORMUJEMY, ŻE BIBLIOTEKA FUNKCJONUJE W NASTĘPUJĄCYCH GODZINACH:
Wypożyczalnia i Czytelnia Główna: poniedziałek – piątek od 9.00 do 19.00