Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Fuel Economy" wg kryterium: Temat


Wyświetlanie 1-13 z 13
Tytuł:
A study of combining gasoline engine downsizing and controlled auto - ignition combustion
Autorzy:
Moxey, B.
Cairns, A.
Ganippa, A.
Zhao, H.
Bassett, M.
Powiązania:
https://bibliotekanauki.pl/articles/248026.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
combustion engines
fuel economy
controlled auto-ignition
downsizing
Opis:
In recent years European automotive CO2 emissions targets have largely been met through increased diesel sales. However, the distillation of crude oil results in high proportions of both gasoline and diesel fuel and ultimately this has resulted in Europe being "diesel lean" at times. In order to meet future global emissions goals, in the short term it will be necessary to improve the fuel consumption of the gasoline engine and in the longer term source sustainable alternatives to crude oil. The objective of the current work was to investigate the optimum trade-off between the opposing engine operating requirements of gasoline engine downsizing and Controlled Auto-Ignition (CAI) combustion for use in a family-sized passenger car. Experimental fuel consumption and emissions data were produced for four sizes of spark ignition engine, varying from 1 to 2 litres in capacity. The additional benefits of two experimentally developed CAI operating methodologies were evaluated in each engine using drive cycle simulation software. The first CAI mode was based on novel use of combined internal and external EGR to attain higher loads. The second involved the adoption of turbocharging at part-load for yet higher output via so-called lean-boosted CAI. It was concluded that, for such a vehicle, a compromise exists where best fuel economy can be obtained from a moderately downsized CAI-capable engine. Compared to the baseline 2 litre engine, it was possible to obtain fuel economy benefit equivalent to that offered from an aggressively downsized 1 litre unit but using a moderately downsized 1.4 litre CAI engine, without the need for any complex boosted operation or expensive emissions aftertreatment systems. As capacity was reduced below 1.4 litres, the benefit of CAI diminished at an accelerated rate due to progressive failure to capture key higher load sites visited across the European drive cycle.
Źródło:
Journal of KONES; 2012, 19, 1; 289-300
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Micro-hybrid with Ultra-Capacitor Based Three-Wheeler
Autorzy:
Saha, Sabhasachi
Roy, Souvik
Rahman, Md. Sazid
Hasan, Md. Zahid
Powiązania:
https://bibliotekanauki.pl/articles/1177902.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Environment Friendly Vehicle
Fuel Economy
Micro-hybrid
Three-Wheeler
Ultra-capacitor
Opis:
Execution of customized Start/stop (SS) advancement in a medium vehicle is a fiscally canny way to deal with improves mileage and rot surges without influencing purchaser request. In urban degrees, where an unbelievable bit of the vehicle driving time is spent sitting at stop lights, the motor can be closed down so spare fuel. The motor is quickly and carefully restarted as the driver quickens it. This working strategy is a significant part of the time utilized as a bit of full small-scale half breed electric vehicles that have fantastic power sparing potential. In this paper the framework is introduced in a Three-Wheeler where the regenerative braking and Stop-Start strategy of the Micro Hybrid structure is worked by Ultra-capacitor alongside Traditional battery. The power conveyance and investigation of vehicle is appeared in paper which was finished by MATLAB. An attainability investigation for Bangladesh is likewise led in this paper.
Źródło:
World Scientific News; 2018, 97; 69-79
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quasi-periodic control technique for minimizing fuel consumption during record vehicle competition
Quasi-okresowa strategia sterowania minimalizujaca zużycie paliwa podczas zawodów pojazdów rekordowych
Autorzy:
Sulikowski, P.
Maroński, R.
Powiązania:
https://bibliotekanauki.pl/articles/140204.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Shell Eco-Marathon
fuel consumption
fuel economy
ekologiczny maraton Shella
zużycie paliwa
oszczędność paliwa
Opis:
The problem of the optimal driving technique during the fuel economy competition is reconsidered. The vehicle is regarded as a particle moving on a trace with a variable slope angle. The fuel consumption is minimized as the vehicle covers the given distance in a given time. It is assumed that the run consists of two recurrent phases: acceleration with a full available engine power and coasting down with the engine turned off. The most fuel-efficient technique for shifting gears during acceleration is found. The decision variables are: the vehicle velocities at which the gears should be shifted, on the one hand, and the vehicle velocities when the engine should be turned on and off, on the other hand. For the data of students’ vehicle representing the Faculty of Power and Aeronautical Engineering it has been found that such driving strategy is more effective in comparison with a constant speed strategy with the engine partly throttled, as well as a strategy resulting from optimal control theory when the engine is still active.
Rozważono zagadnienie wyznaczenia optymalnej strategii sterowania pojazdem w czasie zawodów pojazdów rekordowych. Pojazd jest modelowany jak punkt materialny poruszający się po trasie o zmiennym kącie pochylenia. Minimalizowana jest ilość zużytego paliwa potrzebna do pokonania zadanego dystansu w zadanym czasie. Opracowano najbardziej efektywną technikę zmiany biegów w czasie przyspieszania. Założono, że pojazd jest napędzany w dwóch trybach: przyspieszania przy pełnej dostępnej mocy silnika i wybiegu, kiedy to silnik jest wyłączony. Zmiennymi decyzyjnymi są: numer biegu oraz prędkość pojazdu, przy której powinno nastąpić jego przełączenie z jednej strony, oraz prędkości pojazdu, przy których silnik powinien być włączony lub wyłączony, z drugiej. Wykorzystując dane pojazdu studentów reprezentujących Wydział Mechaniczny Energetyki i Lotnictwa Politechniki Warszawskiej wykazano, że taka strategia jest bardziej efektywna niż strategia jazdy ze stałą prędkością z częściowym dławieniem silnika oraz pewna strategia wynikająca z teorii sterowania optymalnego, gdzie silnik jest stale włączony.
Źródło:
Archive of Mechanical Engineering; 2013, LX, 2; 185-197
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy management strategy of dual planetary hybrid electric vehicle based on optimal transmission efficiency
Autorzy:
Wang, Shangxu
Li, Jiaxin
Shi, Dehua
Sun, Xiaoqiang
Yao, Yong
Powiązania:
https://bibliotekanauki.pl/articles/279483.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
power split hybrid electric vehicle
mechanical point
fuzzy torque distribution
fuel economy
Opis:
A power split hybrid electric vehicle with dual planetary gear sets is studied in this paper. Firstly, the power split and circulation phenomenon are further described by analyzing a speed and torque relationship between the engine, motors and the output shaft based on the lever analogy. The transmission efficiency and the electric power ratio are then obtained. The working modes of the hybrid electric vehicle (HEV) are divided according to the system operation mechanism. On this basis, the engine optimal operating line (OOL) control strategy and the mechanical point (MP) control strategy are designed. Furthermore, a fuzzy controller is designed to realize the optimal torque distribution of the engine and the motors in the MP control strategy. Simulation results demonstrate that the MP control strategy can guarantee a higher efficiency of the transmission system, which also shows good performance in improving fuel economy of the HEV by adjusting the engine operating point.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 2; 383-396
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical evaluation of relationships between tyre energy efficiency class and fuel consumption of a passenger car according to NEDC
Teoretyczna ocena zaleznosci pomiedzy klasa energetyczna opony a zuzyciem paliwa samochodu osobowego według cyklu NEDC
Autorzy:
Golebiewski, W.
Stoeck, T.
Powiązania:
https://bibliotekanauki.pl/articles/793099.pdf
Data publikacji:
2016
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
energy efficiency
tire
fuel consumption
passenger car
operating parameter
fuel economy
New European Driving Cycle
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2016, 16, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monitoring and control of energy management system for fuel cell hybrid in electrical vehicle using fuzzy approach
Autorzy:
Tifour, Benali
Boukhnifer, Moussa
Hafaifa, Ahmed
Tanougast, Camel
Powiązania:
https://bibliotekanauki.pl/articles/327624.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
energy monitoring
fuel cell hybrid
particle swarm
fuel economy
fuzzy logic
monitorowanie energii
zarządzanie energią
ogniwo paliwowe
zużycie paliwa
logika rozmyta
Opis:
Recently, the reduction of fuels consumption is a global challenge, in particular for significant investments in the automotive sector, in order to optimize and control the parameters involved for the partial or total electrification of vehicles. Thereby, the energy management system remains the axis of progress for the development of fuel cell hybrid electric vehicles. The fuzzy controller has been widely adopted for energy monitoring, where the determination of its parameters is still challenging. In this work, this problem is investigated through a secondary development of a fuzzy energy monitoring system based on the Advisor platform and particle swarm optimization. The latter is used to determine, for different driving conditions, the best parameters that increase the fuel economy and reduce the battery energy use. As a result, five tuned fuzzy energy monitoring system models with five sets of parameters are obtained. Evaluation results confirm the effectiveness of this strategy, they also show slight differences between them in terms of fuel economy, battery state of charge variations, and overall system efficiency. However, the fuzzy energy monitoring system tuned under multiple conditions is the only one that can guarantee the minimum of the state of charge variations, no matter the driving conditions.
Źródło:
Diagnostyka; 2020, 21, 3; 15-29
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the use of hybrid electric powertrain system in urban traffic conditions
Ocena zastosowania napędów hybrydowych w warunkach ruchu miejskiego
Autorzy:
Szumska, Emilia
Jurecki, Rafał
Pawełczyk, Marek
Powiązania:
https://bibliotekanauki.pl/articles/301489.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
hybrid electric vehicles
real-world conditions
fuel economy
air pollutants
hybrydowe układy napędowe
rzeczywiste warunki jazdy
zużycie paliwa
emisja
Opis:
The conditions of use of the vehicle significantly affect the performance results. Traffic conditions in a specific city directly affect the consumption of energy, fuel and emissions of harmful compounds in exhaust fumes. Conduction of the measurements of a vehicle’s performance parameters in operating conditions is very troublesome and is often not possible to realize. An alternative is to use the simulation programs. Vehicle simulation programs offer options related to vehicle models or drive unit components and allow development of new models. Based on the results of simulation testing, it is possible to analyse the level of fuel and energy consumption as well as emissions of harmful compounds in exhaust gases and the operating effectiveness of the drive system in the speed profile. The paper presents the evaluation of the effectiveness of using hybrid electric drive system in passenger cars in medium-sized city traffic conditions using the Kielce example. The simulation tests were based on the speed profiles recorded during real-world test drives in various times of the day. The simulation results were used to conduct an analysis of fuel consumption and pollutant emissions recorded by conventional and hybrid vehicles.
Warunki użytkowania pojazdu mają znaczący wpływ na parametry eksploatacyjne pojazdu. Warunki ruchu w określonym mieście bezpośrednio wpływają na zużycie energii, paliwa i poziom emisji szkodliwych związków zawartych w spalinach. Przeprowadzenie pomiarów parametrów eksploatacyjnych pojazdu w warunkach rzeczywistych jest kłopotliwe i często niemożliwe do zrealizowania. Alternatywą jest wykorzystanie symulacji komputerowych. Programy do symulacji pojazdów oferują, między innymi, modele pojazdów lub komponentów układu napędowego oraz pozwalają na opracowanie nowych modeli. Na podstawie wyników badań symulacyjnych możliwa jest analiza poziomu zużycia paliwa, energii, emisji szkodliwych związków zawartych w spalinach oraz efektywności pracy układu napędowego w profilu prędkości. W niniejszej pracy przedstawiono ocenę efektywności zastosowania napędów hybrydowych w samochodach osobowych w warunkach ruchu miasta średniej wielkości na przykładzie Kielc. Do badań symulacyjnych wykorzystano profile prędkości, zarejestrowane podczas rzeczywistych przejazdów w różnych porach dnia. Na podstawie wyników symulacji przeprowadzono analizę zużycia paliwa oraz emisji zanieczyszczeń, zarejestrowanych dla pojazd z napędem konwencjonalnym oraz pojazdów z napędem hybrydowym.
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 1; 154-160
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved fleet operation and maintenance through the use of low viscosity engine oils: fuel economy and oil performance
Poprawa efektywności eksploatacji floty dzięki zastosowaniu olejów silnikowych o niskiej lepkości: oszczędność paliwa i wydajność oleju
Autorzy:
Macián, Vicente
Tormos, Bernardo
Bastidas, Sophia
Pérez, Tomás
Powiązania:
https://bibliotekanauki.pl/articles/301233.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
low viscosity engine oils
fuel economy
real working conditions
oil performance
engine wear
oleje silnikowe o niskiej lepkości
oszczędność paliwa
rzeczywiste warunki pracy
wydajność oleju
zużycie silnika
Opis:
For heavy-duty vehicles and road transportation, fuel consumption and associated CO2 emissions have been of great concern, which has led to the development and implementation of technologies to reduce their impact on the environment. Low viscosity engine oils have arisen as one proven cost-effective solution to increase the engine efficiency; however, for the heavy-duty vehicle segment, engine protection against wear is a priority for end-users, and therefore there is some reluctance to the use of that new oil formulations. In this study, eight lubricant oils, representative of the HTHS viscosity reduction that heavy-duty oils have been undergoing and new API CK-4 and FA-4 categories, were evaluated for fuel economy, oil performance and engine wear, in a long-term test involving a fleet of 49 heavy-duty vehicles of four different engine technologies, some of them with diesel fuel and others with compressed natural gas. Results of fuel economy were positive for most of the buses’ models. Regarding oil performance and wear, most of the formulations were found to be suitable for extended oil drain intervals (ODI); and although no alarming results were found, overall performance of the formulations of the fourth stage could lead to significant wear if the oil drain interval is extended. In this study, it should be noted that some of the information has been presented by the authors in other publications, here they are presented with the purpose of complementing the new results and summarize the entire test.
W przypadku pojazdów o dużej ładowności, i transportu drogowego w ogóle, ważny problem stanowi zużycie paliwa i związana z nim emisja CO2, które wymagają opracowywania i wdrażania technologii zmniejszających ich wpływ na środowisko. Jednym ze sprawdzonych i finansowo korzystnych rozwiązań w tym zakresie są oleje silnikowe o niskiej lepkości, które zwiększają wydajność silnika. Jednak w segmencie pojazdów ciężkich, priorytetem dla użytkowników końcowych jest ochrona silnika przed zużyciem, co pociąga za sobą niechęć do stosowania tych nowych preparatów olejowych. W pracy, przedstawiono badania ośmiu olejów smarowych o obniżonej lepkości wysokotemperaturowej HTHS reprezentatywnych dla produkowanych obecnie kategorii olejów do pojazdów ciężkich, z uwzględnieniem nowych kategorii oleju API CK-4 i FA-4. Oleje oceniano pod kątem oszczędności paliwa, wydajności oleju i zużycia silnika w badaniu długoterminowym obejmującym flotę 49 autobusów o silnikach opartych na różnych technologiach, z których część była zasilana olejem napędowym a część sprzężonym gazem ziemnym. Wyniki dotyczące oszczędności zużycia paliwa były pozytywne dla większości modeli badanych autobusów. Jeśli chodzi o wydajność oleju i zużycie silnika, większość preparatów okazała się być przystosowana do dłuższych okresów wymiany oleju; chociaż nie zaobserwowano niepokojących wyników, to jednak ogólna wydajność preparatów w czwartym etapie testu, mogłaby prowadzić do znacznego zużycia silnika przy wydłużeniu okresu wymiany oleju. Część przedstawionych danych publikowaliśmy już w innych pracach. Niniejszy artykuł stanowi uzupełnienie poprzednich wyników oraz podsumowanie całego badania.
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 2; 201-211
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of emission and reduction of greenhouse gases from upstream petrochemical industry in Thailand
Autorzy:
Kanchanapiya, P.
Julapun, N.
Limphitakphong, N.
Pharino, C.
Chavanparit, O.
Powiązania:
https://bibliotekanauki.pl/articles/207793.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
greenhouse gases
aromatic compounds
energy conservation
energy utilization
fuel economy
fuels
olefins
petrochemical plant
petrochemicals
petrochemical industry
production process
gazy cieplarniane
związki aromatyczne
oszczędzanie energii
wykorzystanie energii
zużycie paliwa
paliwa
olefiny
zakłady petrochemiczne
petrochemia
przemysł petrochemiczny
proces produkcji
Opis:
The study aimed to determine the baseline and indicators for the emission of greenhouse gases (GHG) and to evaluate the effectiveness of GHG mitigation measures in Thai upstream petrochemical plants. During 2005–2010, the upstream production had an annual demand for energy in the range of 110 000–150 000 TJ, ca. 5–6% of the total Thailand energy consumption. The proportion of energy consumption for producing olefin and aromatic products is 73 and 14%, respectively. The amount of GHG emissions equalled approximately 7–9 Mt CO2 eq. This represents a 3% portion of the total GHG emissions of Thailand, separating into the olefin and aromatic products, around 69 and 18%, respectively. The ratios of GHG emission came from fuel combustion of 59%, steam consumption (28%), electricity consumption (10%) and flare (3%). The carbon intensity of upstream products in the olefins and aromatics’ groups had the range of 1.125–1.309 and 0.518–0.667 t CO2 eq/t, respectively. It was likely that the carbon intensity during the period of 2005–2010 was lowered as the industry sector took measures to improve energy conservation and developed their production processes. The GHG mitigation measures by energy conservation were already implemented including fuel saving (67%), steam saving (23%) and electricity saving (10%).
Źródło:
Environment Protection Engineering; 2015, 41, 2; 31-46
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ways to corrections expensive economics work of engine of heavy loaded truck
Drogi poprawy ekonomiczności pracy silników samochodów ciężarowych dużej ładowności
Autorzy:
Mysłowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/246466.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
silnik spalinowy
ekonomia pracy
zużycie paliwa
combustion engines
work economy
fuel consumptions
Opis:
On example of Volvo car engine we shows that without break we try to search method of decrease fuel consumptions. With the aid simulation research we show constant progress in this domain. Producers don't want to shows results new research and possible failures. Ultimate verification is genuine exploitation of vehicle in conditions of big traffic, method of simulation research of fuel consumptions by these engines give us way to fast effecting of estimate of effect of exploitation. Assumption at working out of the method was possibility of the determination of the specific fuel consumption with accuracy plus or minus 5 %, so as it is required from producers of engines in relation to of rated power. Used method makes possible the realization of the performance of the specific fuel consumption with accuracy of 2,12 %, whereat this result refers to modern diesel engines with turbocharging and with the cooling of the air supercharging of such firms as Volvo, Scania, MAN, IVECO, Mercedes and DAF. In calculations the Leidemann equation has been was applied. The paper is illustrated calculations of the specific fuel consumption reference for Volvo D6B 180/220/250 and Volvo D 12D engines.
Na przykładzie silników samochodów firmy Volvo wykazano jak bez przerwy trwają poszukiwania nad zmniejszeniem zużycia paliwa tych silników. Za pomocą badań symulacyjnych wykazano stały postęp w tej dziedzinie, mimo że producenci niechętnie przedstawiają wyniki najnowszych badań oraz ewentualnie niepowodzenia, które towarzyszą wspomnianym poszukiwaniom. Ostateczną weryfikacją uzyskanych rezultatów jest eksploatacja pojazdów napędzanych nową generacją silników w warunkach wzmożonego ruchu drogowego, a metody symulacyjne określania zużycia paliwa przez wspomniane silniki pozwalają na szybkie i skuteczne dokonanie oceny efektów eksploatacyjnych. Założeniem przy opracowywaniu metody była możliwość wyznaczenia jednostkowego zużycia paliwa z dokładnością plus minus 5%, tak jak to wymagane jest od producentów silników w stosunku do mocy znamionowej. Zastosowana metoda umożliwia wykonanie charakterystyki jednostkowego zużycia paliwa z dokładnością 2,12 %, przy czym wynik ten odnosi się do nowoczesnych silników wysokoprężnych z turbodoładowaniem i chłodzeniem powietrza doładowującego takich firm, jak Volvo, Scania, MAN, IVECO, Mercedes i DAF. W obliczeniach wzór Leidemanna został wykorzystany. Artykuł jest ilustrowany obliczeniami jednostkowego zużycia paliwa odniesieniu do silników Volvo D6B 180/220/250 oraz Volvo D 12D.
Źródło:
Journal of KONES; 2007, 14, 3; 437-441
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of high-speed traction gearbox ratio on vehicle fuel consumption
Wplyw przelozenia szybkobieznosci na zuzycie paliwa pojazdu
Autorzy:
Golebiewski, W.
Stoeck, T.
Powiązania:
https://bibliotekanauki.pl/articles/792794.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
high-speed traction
gearbox
fuel consumption
mileage fuel consumption
energy consumption
vehicle
engine torque
ecology
economy
linear velocity
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The future of the fuel in the marine industry
Autorzy:
Owierkowicz, Dariusz
Malinowska, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/1179536.pdf
Data publikacji:
2017
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
LNG
MARPOL Convention
alternative energy sources
biofuels
fuel
hydrogen
maritime economy
sulfur oxides
Opis:
The marine propulsion plants of modern commercial marine vessels are based on huge two-stroke low-speed engines, which consume very low-quality residual fuel. As a result of heavy fuel combustion, emissions of harmful (toxic) pollutants into the atmosphere, particularly sulfur oxides, occur. Consequently, such acts are subject to the laws and regulations norms governing their use in national waters, the European Union and the whole world. On the other hand, ship owners who do not comply with prescribed standards are subject to high fines and therefore the maritime economy is looking for new, cleaner sources of energy in shipbuilding. Authors based on the analysis of literature and legislation present possible solutions to the problem mentioned.
Źródło:
World Scientific News; 2017, 76; 136-148
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Role of biotechnology in developing the bioenergy sector in Poland
Autorzy:
Daroch, M.
Mos, M.
Powiązania:
https://bibliotekanauki.pl/articles/80227.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bioenergy
biofuel
biomass
biotechnology
Directive 2009-28-EC
ecological consequence
economic potential
European Union
fossil fuel
implementation
plant biotechnology
Polish economy
promotion
renewable energy source
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2011, 92, 1
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-13 z 13

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies