Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "osad nadmierny" wg kryterium: Temat


Wyświetlanie 1-6 z 6
Tytuł:
The course of the methane fermentation process of dry ice modified excess sludge
Przebieg procesu fermentacji metanowej osadów nadmiernych modyfikowanych suchym lodem
Autorzy:
Zawieja, Iwona Ewa
Powiązania:
https://bibliotekanauki.pl/articles/204795.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
methane fermentation
excess sludge
dry ice disintegration
fermentacja metanowa
osad nadmierny
rozpad suchego lodu
Opis:
The essence of the methane fermentation course is the phase nature of changes taking place during the process. The biodegradation degree of sewage sludge is determined by the effectiveness of the hydrolysis phase. Excess sludge, in the form of a flocculent suspension of microorganisms, subjected to the methane fermentation process show limited susceptibility to the biodegradation. Excess sludge is characterized by a significant content of volatile suspended solids equal about 65 ÷ 75%. Promising technological solution in terms of increasing the efficiency of fermentation process is the application of thermal modification of sludge with the use of dry ice. As a result of excess sludge disintegration by dry ice, denaturation of microbial cells with a mechanical support occurs. The crystallization process takes place and microorganisms of excess sludge undergo the so-called “thermal shock”. The aim of the study was to determine the effect of dry ice disintegration on the course of the methane fermentation process of the modified excess sludge. In the case of dry ice modification reagent in a granular form with a grain diameter of 0.6 mm was used. Dry ice was mixed with excess sludge in a volume ratio of 0.15/1, 0.25/1, 0.35/1, 0.45/1, 0.55/1, 0.65/1, 0.75/1, respectively. The methane fermentation process lasting for 8 and 28 days, respectively, was carried out in mesophilic conditions at 37°C. In the first series untreated sludge was used, and for the second and third series the following treatment parameters were applied: the dose of dry ice in a volume ratio to excess sludge equal 0.55/1, pretreatment time 12 hours. The increase of the excess sludge disintegration degree, as well as the increase of the digestion degree and biogas yield, was a confirmation of the supporting operation of the applied modification. The mixture of reactant and excess sludge in a volume ratio of 0.55/1 was considered the most favorable combination. In relation to not prepared sludge for the selected most favorable conditions of excess sludge modification, about 2.7 and 3-fold increase of TOC and SCOD values and a 2.8-fold increase in VFAs concentration were obtained respectively. In relation to the effects of the methane fermentation of non-prepared sludge, for modified sludge, about 33 percentage increase of the sludge digestion degree and about 31percentage increase of the biogas yield was noticed.
Istotą przebiegu fermentacji metanowej jest fazowy charakter przemian zachodzących w trakcie procesu. Stopień biodegradacji osadów ściekowych zależy od skuteczności fazy hydrolizy. Osady nadmierne występujące w postaci kłaczkowatej zawiesiny drobnoustrojów, poddawane procesowi fermentacji metanowej, wykazuje ograniczoną podatność na biodegradację. Osady nadmierne charakteryzują się znaczną około 65 ÷ 75% zawartością substancji organicznych. Obiecującym rozwiązaniem technologicznym pod względem zwiększenia efektywności procesu fermentacji jest zastosowanie modyfikacji osadów nadmiernych suchym lodu. W wyniku dezintegracji osadów nadmiernych suchym lodem zachodzi denaturacja komórek drobnoustrojów o podłożu mechanicznym. Zachodzi proces krystalizacji, a mikroorganizmy osadu nadmiernego ulegają tak zwanemu „szokowi termicznemu”. Celem badań było określenie wpływu dezintegracji osadów nadmiernych suchym lodem na przebieg procesu fermentacji metanowej modyfikowanych osadów. W przypadku modyfikacji suchym lodem zastosowano reagent w postaci granulatu o uziarnieniu 0,6 mm. Suchy lód zmieszano z osadem nadmiernym w stosunku objętościowym odpowiednio 0,15/1, 0,25/1, 0,35/1, 0,45/1, 0,55/1, 0,65/1, 0,75/1. Proces fermentacji metanowej trwający 8 i 28 dób prowadzono w warunkach mezofilowych w 37°C. W pierwszej serii zastosowano niepreparowane osady nadmierne, a w kolejnej mieszaninę suchego lodu i osadów nadmiernych w stosunku objętościowym wynoszącym 0,55/1, czas wstępnej obróbki 12 godzin. Uzyskany wzrost stopnia przefermentowania osadów i efektywności produkcji biogazu jest potwierdzeniem wspomagającego działania zastosowanej modyfikacji. Mieszaninę reagenta i osadów nadmiernych w stosunku objętościowym 0,55/1 uznano za najkorzystniejsze połączenie. W odniesieniu do niepreparowanych osadów nadmiernych, dla wybranych warunków dezintegracji uzyskano odpowiednio około 2,7- i 3-krotny wzrost wartości całkowitego węgla organicznego, rozpuszczonego chemicznego zapotrzebowania na tlen oraz 2,8-krotny wzrost stężenia lotnych kwasów tłuszczowych. W odniesieniu do efektów fermentacji metanowej niepreparowanych osadów nadmiernych, w przypadku osadów modyfikowanych odnotowano około 33% wzrost stopnia przefermentowania i około 31% wzrost wartości jednostkowej produkcji biogazu.
Źródło:
Archives of Environmental Protection; 2019, 45, 1; 50-58
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pozyskiwanie osadu nadmiernego w standardowym układzie sterowania oczyszczalnią ścieków
Excess sludge acquisition in a standard sewage treatment plant control system
Autorzy:
Tomasik, M.
Tyrlik, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/292206.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
sterowanie automatyczne
przepływ
osad nadmierny
oczyszczalnia ścieków
automatic control
flow
excess sludge
sewage treatment plant
Opis:
W pracy przedstawiono wyniki badań doświadczalnych systemu oczyszczania ścieków, w tym pomiarów przepływu ścieków oraz pomiarów ilości uzyskiwanego osadu nadmiernego (przeznaczanego na cele energetyczne). Wykazały one duży, niewykorzystywany potencjał osadu nadmiernego zawartego w ściekach. Badania zostaną wykorzystane do opracowania koncepcji modernizacji systemu oczyszczania ścieków. Rozbudowanie oczyszczalni o system recyrkulacji ścieków przyczyni się do wzrostu ilości pozyskiwanego osadu nadmiernego oraz wpłynie na poprawę jakości ich oczyszczania.
The work presents the results of an experimental research on the sewage treatment system, including sewage flow measurements and measuring the volume of obtained excess sludge (intended for energy purposes). They have proved a high and unused potential of excess sludge contained in sewage. The studies will be used to develop a concept of modernisation of the sewage treatment system. The extension of a sewage treatment plant by adding a sewage recirculation system will contribute to increasing the volume of acquired excess sludge and allow improving the quality of sewage treatment.
Źródło:
Inżynieria Rolnicza; 2011, R. 15, nr 4, 4; 295-301
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical modelling of wet oxidation of excess sludge
Autorzy:
Chacuk, A.
Imbierowicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/779933.pdf
Data publikacji:
2007
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
modelowanie matematyczne
utlenianie mokre
osad ściekowy
kolumna barbotażowa
osad nadmierny
mathematical modelling
wet oxidation
excess sludge
bubble column
Opis:
A mathematical model enabling a quantitative description of wet oxidation of excess sludge in continuous bubble columns is proposed. The model consists of mass and heat transfer kinetic equations and material and heat balance equations of gas and liquid phases flowing through the absorber. The equations of material and heat balance refer to a parallel, co- current flow of gas and liquid phase and take into account a complex chemical reaction in the liquid phase core. The proposed model was used in a numerical simulation of wet oxidation in a bubble absorber for different process conditions: flow rate and composition of the gas and liquid phase, temperature and pressure, and different heights and diameters of the column.
Źródło:
Polish Journal of Chemical Technology; 2007, 9, 2; 1-4
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of ultrasonic field strength on the structural changes of disintegrated excess sludge
Wpływ natężenia pola UD na zmiany struktury dezintegrowanych osadów nadmiernych
Autorzy:
Barański, M.
Zawieja, I.
Wolny, L.
Powiązania:
https://bibliotekanauki.pl/articles/395741.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
osad nadmierny
stabilizacja beztlenowa
struktura osadów
excess sludge
sludge structure
physical conditioning
chemical oxygen demand (COD)
anaerobic stabilization
Opis:
Exposure of sludge to the ultrasonic field as a disintegrating factor before the mesophilic anaerobic stabilisation directly affects the increase in the susceptibility of sludge on the biochemical process of decomposition in the anaerobic conditions. Thanks to the use of sewage sludge pretreatment, an increase of the disintegration degree of sludge undergoing physical modifications is reached, as well as the intensification of biogas production. The aim of the study was to record changes in the structure of excess sludge tested, as well as the determination of disintegration degree [%] versus the strength of ultrasound wave [W/cm2]. An ultrasonic disintegrator VCX – 1500 (Sonics Company) was used in the investigation. The test substrate was excess sludge from the Central Wastewater Treatment Plant P.S.W. "WARTA" in Czestochowa. Two cycles of tests were conducted, which implement the following amplitude A= 7.85 [mikro]m and 39.25 [mikro]m and the time of sonification ts = 30 ÷ 360s. The most beneficial effect of ultrasound treatment on the excess sludge was noted for the amplitude A=39.25 [mikro]m and the sonication time 360s, which resulted in 83.25% degree of disintegration of excess sludge. For these parameters, the strenght of ultrasonic wave was 4.8 W/cm2. In addition, a large dispersion of sludge particles prepared with ultrasonic field and enlargement of the liquid phase in relation to unconditioned sludge were observed. The noted changes of structure correlate with the obtained degree of disintegration of the excess sludge.
Poddanie osadów działaniu pola ultradźwiękowego, jako czynnika dezitegrującego przed procesem mezofilowej stabilizacji beztlenowej wpływa bezpośrednio na zwiększenie podatności osadów na proces biochemicznego rozkładu w warunkach beztlenowych warunkując szybkość przebiegu fazy hydrolitycznej fermentacji metanowej. Dzięki zastosowaniu prekondycjonowania osadów ściekowych uzyskuje się wzrost stopnia przefermentowania osadów poddanych fizycznej modyfikacji, jak również intensyfikację produkcji biogazu. Celem prowadzonych badań przy użyciu dezintegratora ultradźwiękowego o mocy 1500W z automatycznym strojeniem typu VCX–1500 amerykańskiej firmy SONICS było zobrazowanie zmian zachodzących w strukturze osadów nadmiernych, jak również określenie wartości stopnia dezintegracji [%] od natężenia fali ultradźwiękowej [W/cm2]. Substratem badań był nadmierny osad czynny pochodzący z Centralnej Oczyszczalni Ścieków P.S.W. „WARTA” w Częstochowie. Przeprowadzono dwa cykle badawcze, w których zastosowano następujące amplitudy drgań A = 7,85 žm i 39,25 žm oraz czas nadźwiękawiania tn = 30 ÷ 360s. Najkorzy-stniejszy wpływ działania czynnego pola ultradźwiękowego na osady ściekowe odnotowano dla amplitudy A.39,25 žm oraz czasu sonifikacji 360s, dla których uzyskano 83,25% stopień dezintegracji osadów nadmiernych. Natężenie fali UD dla omawianych parametrów pola ultradźwiękowego wynosiło 4,8 W/cm2. Ponadto zaobserwowano znaczną dyspersję cząstek osadów preparowanych polem UD oraz powiększenie fazy ciekłej w odniesieniu do osadów niekondycjonowanych. Zmiany struktury korelowały z uzyskanym stopniem dezintegracji osadów nadmiernych.
Źródło:
Civil and Environmental Engineering Reports; 2011, 6; 117-126
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ termicznej hydrolizy na zmiany struktury osadów nadmiernych poddanych stabilizacji beztlenowej
Influence or thermal hydrolysis on the excess sludge structure during anaerobic stabilization
Autorzy:
Barański, M.
Zawieja, I.
Powiązania:
https://bibliotekanauki.pl/articles/297785.pdf
Data publikacji:
2010
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
osad nadmierny
struktura osadów
chemiczne zapotrzebowanie tlenu
ChZT
kondycjonowanie termiczne
stabilizacja beztlenowa
excess sludge
sludge structure
chemical oxygen demand
COD
thermal pretreatment
anaerobic stabilization
Opis:
Zastosowanie termicznej obróbki osadów przed procesem mezofilowej stabilizacji beztlenowej wpływa na zwiększenie podatności osadów na proces biochemicznego rozkładu w warunkach beztlenowych. W wyniku kondycjonowania osadów uzyskano wyższy stopień dezintegracji osadów poddanych działaniu podwyższonej temperatury w odniesieniu do stopnia dyspersji surowych osadów nadmiernych. W wodzie nadosadowej modyfikowanych termicznie osadów zaobserwowano wzrost wartości stężenia substancji organicznych w formie rozpuszczonej wyrażony przyrostem wartości chemicznego zapotrzebowania tlenu (ChZT) oraz lotnych kwasów tłuszczowych (LKT). Celem przeprowadzonych badań, mających charakter obserwacji mikroskopowych, było zobrazowanie oraz ocena zmian zachodzących w strukturze osadów nadmiernych podczas termicznej modyfikacji osadów oraz w kolejnych 10 dobach procesu stabilizacji beztlenowej. Substratem badań był nadmierny osad czynny pochodzący z Centralnej Oczyszczalni Ścieków P.S.W. "WARTA" w Częstochowie. W celu zainicjowania procesu stabilizacji osad nadmierny zaszczepiono osadem przefermentowanym, stanowiącym 10% mieszaniny badawczej. Badania przeprowadzono dla Mieszaniny I (osad nadmierny + osad przefermentowany) oraz Mieszaniny II (osad nadmierny kondycjonowany termicznie w temp. 70°C przez 1,5 h + osad przefermentowany).
Application of sludge thermal treatment before the mesophilic anaerobic stabilization process influenced on the increase of sludge susceptibility to biochemical decomposition in anaerobic conditions. In the result of thermal pretreatment the higher disintegration degree of sludge submitted to temperature action, in comparison to dispersion degree of raw excess sludge was observed. In the liquid phase of the sludge pretreated by the mentioned method, the increasing of concentration value of organic substances in soluble form was noticed. It was expressed by the increase of chemical oxygen demand (COD) value. The purpose of the microscope observation study was the estimation of the sludge structure changes during thermal modification as well as during successive days of 10 days' anaerobic stabilization process. The subject of the tests was excess active sludge coming from the waste water treatment plant P.S.W. "WARTA" in Czestochowa. The tests were conducted on a mixture of excessive and digested sewage that was subjected to mesophilic methane fermentation. The Mixture I (raw excess sludge + digested sludge) and the Mixture II (thermal pretreatment excess sludge at the temp 70°C through the period of 1.5 h + digested sludge) were submitted to the research.
Źródło:
Inżynieria i Ochrona Środowiska; 2010, 13, 2; 85-91
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Thermal Disintegration of Excess Sludge on the Effectiveness of Hydrolysis Process in Anaerobic Stabilization
Wpływ termicznej dezintegracji osadów nadmiernych na efektywność procesu hydrolizy w stabilizacji beztlenowej
Autorzy:
Zawieja, I.
Wolski, P.
Powiązania:
https://bibliotekanauki.pl/articles/204925.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
osad nadmierny
rozkład termiczny
hydroliza
stabilizacja beztlenowa
stopień fermentacji osadów
lotne kwasy tłuszczowe
excess sludge
thermal disintegration
hydrolysis
anaerobic stabilization
degree of sludge fermentation
volatile fatty acids
chemical oxygen demand
Opis:
The factor which essentially affects sludge biodegradation rate is the degree of fluidization of insoluble organic polymers to the solved form, which is a precondition for availability of nutrients for microorganisms. The phases which substantially limit the rate of anaerobic decomposition include hydrolytic and methanogenic phase. Subjecting excess sludge to the process of initial disintegration substantially affects the effectiveness of the process of anaerobic stabilization. As a result of intensification of the process of hydrolysis, which manifests itself in the increase in the value and rate of generating volatile fatty acids (VFA), elongation of methanogenic phase of the process and increase in the degree of fermentation of modified sludge can be observed. Use of initial treatment of sewage sludge i.e. thermal disintegration is aimed at breaking microorganisms' cells and release of intracellular organic matter to the liquid phase. As a result of thermal hydrolysis in the sludge, the volatile fatty acids (VFA) are generated as early as at the stage of the process of conditioning. The obtained value of VFA determines the course of biological hydrolysis which is the first phase of anaerobic stabilization. The aim of the present study was to determine the effect of thermal disintegration of excess sludge on the effectiveness of the process of hydrolysis in anaerobic stabilization i.e. the rate of production of volatile fatty acids, changes in the level of chemical oxygen demand (COD) and increase in the degree of reduction in organic matter. During the first stage of the investigations, the most favourable conditions of thermal disintegration of excess sludge were identified using the temperatures of 50°C, 70°C, 90°C and heating times of 1.5 h - 6 h. The sludge was placed in laboratory flasks secured with a glass plug with liquid-column gauge and subjected to thermal treatment in water bath with shaker option. Another stage involved 8-day process of anaerobic stabilization of raw and thermally disintegrated excess sludge. Stabilization was carried out in mesophilic temperature regime i.e. at 37°C, under periodical conditions. In the case of the process of anaerobic stabilization of thermally disintegrated excess sludge at the temperature of 50°C and heating time of 6 h (mixture B) and 70°C and heating time of 4.5% (mixture C), the degree of fermentation of 30.67% and 33.63%, respectively, was obtained. For the studied sludge, i.e. mixture B and mixture C, maximal level of volatile fatty acids i.e. 874.29 mg CH3COOH/dm3 and 1131.43 mg CH3COOH/dm3 was found on the 2nd day of the process. The maximal obtained value of VFA was correlated on this day with maximal COD level, which was 1344 mg O2/dm3 for mixture B and 1778 mg O2/dm3 for mixture C.
Za czynnik wpływający w istotny sposób na szybkość biodegradacji osadów uważany jest stopień upłynnienia nierozpuszczalnych polimerów organicznych do postaci rozpuszczonej, warukującej dostępność substancji odżywczych dla mikroorganizmów. Fazami ograniczającymi szybkość beztlenowego rozkładu są faza hydrolityczna i metanogenna. Poddanie osadów nadmiernych procesowi wstępnej dezintegracji znacząco wpływa na efektywność procesu stabilizacji beztlenowej. W wyniku intensyfikacji procesu hydrolizy, przejawiającej się wzrostem wartości oraz zwiększeniem szybkości generowania lotnych kwasów tłuszczowych (LKT), można zaobserwować wydłużenie fazy metanogennej procesu oraz wzrost stopnia przefermentowania modyfikowanych osadów. Zastosowanie wstępnej obróbki osadów ściekowych, tj. m.in. termicznej dezintegracji osadów, ma na celu rozbicie komórek mikroorganizmów oraz uwolnienie wewnatrzkomórkowej materii organicznej do fazy ciekłej. W wyniku zachodzącej hydrolizy termicznej osadów następuje już na etapie procesu kondycjonowania generowanie lotnych kwasów tłuszczowych (LKT). Uzyskana wartość LKT determinuje przebieg hydrolizy biologicznej, stanowiącej pierwszą fazę stabilizacji beztlenowej. Celem badań było określenie wpływu termicznej dezintegracji osadów nadmiernych na efektywność procesu hydrolizy w stabilizacji beztlenowej, tj. szybkość produkcji lotnych kwasów tłuszczowych, zmiany wartości ChZT oraz wzrost stopnia redukcji substancji organicznych. W pierwszym etapie badań dokonano określenia najkorzystniejszych warunków termicznej dezintegracji osadów nadmiernych stosując temperaturę 50°C, 70°C, 90°C i czas ogrzewania 1,5 h - 6 h. Osady umieszczone w kolbach laboratoryjnych, zamknięte szklanym korkiem z rurką manometryczną, poddano termicznej obróbce w łaźni wodnej z wytrząsaniem. W kolejnym etapie przeprowadzono 8-dobowy proces stabilizacji beztlenowej surowych oraz dezintegrowanych termicznie osadów nadmiernych. Stabilizacje prowadzono w mezofilowym reżimie temperatur tj. 37°C, w warunkach okresowych. W przypadku procesu stabilizacji beztlenowej termicznie dezintegrowanych osadów nadmiernych w temperaturze 50°C i czasie ogrzewania 6 h (Mieszanina B) oraz 70°C i czasie ogrzewania 4,5 h (Mieszanina C) uzyskano stopień przefermentowania wynoszący odpowiednio: 30,67% oraz 33,63%. Dla badanych osadów, tj. Mieszaniny B oraz C, maksymalną wartość lotnych kwasów tłuszczowych, tj. 874,29 mg CH3COOH/dm3 i 1131,43 mg CH3COOH/dm3, uzyskano w 2 dobie procesu. Z otrzymaną maksymalną wartością LKT korelowała odnotowana w ww. dobie procesu maksymalna wartość wskaźnika ChZT, wynosząca dla mieszaniny B 1344 mg O2/dm3, natomiast dla Mieszaniny C 1778 mg O2/dm3.
Źródło:
Archives of Environmental Protection; 2012, 38, 1; 103-114
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies