Temat: diesel engine diagnosis - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Assessment of the diagnostic suitability of net thermal efficiency of marine diesel engine
Autorzy:: Pawletko, R.
Polanowski, S.
Witkowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/247360.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
thermal efficiency
diesel engine diagnosis
Opis:: This article applies to searching for symptoms and diagnostic parameters pointing in a deterioration in the quality of the combustion process in marine diesel engines. It was assumed that diagnostic parameters should give clear information regardless of engine load or with respect to the mean indicated pressure. The proposed cycle and sectional net thermal (heat) efficiency characteristics and also dimensionless net heat release rate were analysed. In order to obtain the state of deterioration of the injection process simulation of discalibration (larger diameter) of injector holes was performed. The simulation was carried out by the enlarged of diameter of the injector holes form 0.375 mm to 0.385 mm. Deterioration of the formation and growth of fuel spray droplet diameter is result of such simulation. The study was conducted on a laboratory engine Sulzer Al25/30. The study was carried out according to active experiment plan, during which the selected engine failure of the injection system was simulated. Measurements of pressure of combustion were performed by means of tensometric sensors of Spice Company on the indicator valve. The analysis found that in the event of injector nozzle faults (discalibrated holes) significantly decreases the net thermal efficiency η c cycle, and there are significant oscillations of net
Źródło:: Journal of KONES; 2013, 20, 4; 327-332
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Influence of clogged injector nozzles on the heat release characteristics
Autorzy:: Pawletko, R.
Polanowski, S.
Powiązania:: https://bibliotekanauki.pl/articles/243678.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
heat release characteristics
marine diesel engine diagnosis
Opis:: The paper presents the results of research of the influence of clogged injector nozzles in fuel injection system on the shape of heat release characteristics. The study was conducted on a laboratory four-stroke marine engine, type Sulzer 3Al 25/30, with nominal power Ne = 408 kW at nominal rotational speed n = 750 rpm. The study was carried out according to active experiment plan, during which the engine failure of the injection system was simulated. Simulation of loss of patency of injector nozzles (clogged) was to completely clog two holes of nine injection injector nozzle holes with a diameter of 0,325 mm. Measurements were made at a constant engine speed of 750 rev/min for five loads: 50, 100, 150, 200, 250 kW. Measurements of pressure of combustion were performed by means of tensometric sensors of Spice Company. Based on measured pressure curves heat release characteristics were determined. The algorithm allows the determination of net heat release rate q and the net generated heat Q characteristics. Based on the obtained results it can be concluded that significant improvement in the diagnostic use of indicator diagrams can be obtained by using heat release characteristics. These characteristics are correlated with the process of fuel injection and the injection pump operation. As demonstrated in the work of analysing the heat release rate q, it is possible to infer diagnosis on the technical condition of the fuel injection system.
Źródło:: Journal of KONES; 2013, 20, 3; 307-314
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Knowledge management system for marine diesel engine diagnosis
Autorzy:: Charchalis, A.
Pawletko, R.
Powiązania:: https://bibliotekanauki.pl/articles/242163.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: knowledge management system
diagnostic expert system
marine diesel engine diagnosis
Opis:: The paper presents the conception of knowledge management system for a diagnostic expert system. Development of knowledge management system is necessary during the construction of the expert system. The most important reason is that knowledge in this system is not a static whole, but is subject to dynamic growth, is modified and updated. Advantages afforded by the creation of diagnostic systems based on knowledge, such as expert systems, compared to traditional diagnostic systems based on closed algorithms were characterized. The conception of knowledge management system established in the diagnostic work associated with the development of expert system for marine diesel engine diagnosis. The main elements of the developed management system are: dictionary editor, rule editor, knowledge assessment module and import and export module. Knowledge management system is also equipped with an electronic form that is used to obtain knowledge from experts, specialists in diesel engines operation. The article presents the tasks and the performance of individual components of the system. The knowledge management system enables integration within a single frame of both information collected from experts and automatically collected one. A doubtless advantage of expert system is the opportunity of updating and developing the content recorded in the database. Due to this feature, the effectiveness of the system may grow during engine operation and facilitate gaining new experience.
Źródło:: Journal of KONES; 2011, 18, 2; 77-83
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The possibility of fuel injection pump diagnosis on the basis of indicator diagram
Autorzy:: Pawletko, R.
Powiązania:: https://bibliotekanauki.pl/articles/246551.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
heat release characteristics
marine diesel engine diagnosis
fuel pump leakage
Opis:: The paper presents the results research related to the possibility of fuel injection pump diagnosis on the basis of indicator diagram. The study was conducted on a laboratory four-stroke marine engine, type Sulzer 3Al 25/30, with nominal power Nen = 408 kW at nominal rotational speed n = 750 rpm. The study was carried out according to active experiment plan, during which the engine failure of the injection system was simulated. Simulation of fuel pump leakage was completed by the opening of the adjusting screw on the pump discharge. Measurements were made at a constant engine speed of 750 rev/min for five loads: 50, 100, 150, 200, 250 kW. Measurements of pressure of combustion were performed by means of tensometric sensors of Spice Company. Based on measured pressure curves heat release characteristics were determined. The algorithm allows the determination of net heat release rate q and the net generated heat Q characteristics. Based on the obtained results it can be concluded that significant improvement in the diagnostic use of indicator diagrams can be obtained by using heat release characteristics. These characteristics are correlated with the process of fuel injection and the injection pump operation. As demonstrated in the work of analyzing the heat release rate q, it is possible to infer diagnosis on the technical condition of the fuel injection system.
Źródło:: Journal of KONES; 2014, 21, 1; 215-221
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The application of spectrum analysis of course of pressure in combustion chamber for diagnosis of medium speed marine diesel engines
Autorzy:: Monieta, J.
Rutkowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/243650.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: piston marine diesel engine
course of combustion pressure
diagnosis
spectrum analysis
Opis:: In this work has been undertaken a study test the application course of combustion pressure signals in combustion chamber the marine medium-speed engine to diagnostic. In research has been used active experiment. The pressure signals analysis in cylinder has been carried out in amplitude and frequency domain, as new method for result processing. In preliminary research has been carried out with used marine engine 5BAH22 with current generator, be present in Engines Room Laboratory the Maritime Academy in Szczecin. Preliminary research has consisted in measurement the course of combustion pressure signals in individual cylinders and analysis the combustion pressure signals in time, amplitude and frequency domain at different engine load the combustion engine and has been checked that diagnostic parameters will be correlate with engine load. The current generator has been loaded with water resistor. The purpose of this work have been selected sensitive diagnostic symptoms and checked their usability in diagnosis marine diesel engine. In principal research has been simulated inability the turbocharger air filter as his mechanical impurities. Useful diagnostic symptoms have been determined. The method were being verified, execute operating research on working marine diesel engines at port and shipyard.
Źródło:: Journal of KONES; 2008, 15, 3; 367-374
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The multidimensional diesel engine diagnosis based on the vibroacoustic signal spectrum analysis
Wielowymiarowa diagnostyka silników o zapłonie samoczynnym oparta na badaniu widm sygnału wibroakustycznego
Autorzy:: Boruta, G.
Jasiński, M.
Powiązania:: https://bibliotekanauki.pl/articles/241793.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diagnostyka wibroakustyczna
analiza składowych głównych (PCA)
rozkład macierzy względem wartości własnych (SVD)
silnik o zapłonie samoczynnym
vibroacoustic diagnosis
principal components analysis (PCA)
singular value decomposition (SVD)
diesel engine
Opis:: Higher and higher exploitation demands given to the equipment and machines from reasons of safety and minimalization of exploitation costs, cause the necessity of the search for the new methods of the damages detection in the diagnosed objects, for example on the base of the vibroacoustics signals analysis. The natural feature of vibroacoustics diagnostics is the possibility for an easy and fast recording of a high figure of strongly redundant vibroacoustics signals and related with this the large surplus of information, which is not utilized in great part, but simultaneously the necessity for the usage of the multidimensional diagnostic vector steps out most often. This causes the necessity diminution of utilized information to the level permitting on design of adequate diagnostic model. One of methods of machines defects diagnose is the correlation of the objective technical condition with diagnostic parameters received from the vibroacoustic signal. Principal Components Analysis (PCA) offers an approach for a linear transformation of those parameters. The redundant information included into those parameters is reduced and the obtained diagnostic model is more reliable. The product chosen for the investigation presented in this paper is a Diesel engine. The application of the presented method eliminates the necessity of the performing analytical model which are time consuming and costly. It is possible to diagnose of the engine from objective parameters of the specially prepared vibroacoustic signal without performing simulation models.
Coraz wyższe wymagania eksploatacyjne stawiane urządzeniom i maszynom ze względów bezpieczeństwa oraz minimalizacji kosztów eksploatacji, powodują konieczność poszukiwania nowych metod wykrywania uszkodzeń w diagnozowanych obiektach np. na podstawie analizy sygnałów wibroakustycznych. Naturalną cechą diagnostyki wibroakustycznej jest możliwość łatwej i szybkiej rejestracji dużej liczby silnie redundantnych sygnałów wibroakustycznych i związanego z tym dużego nadmiaru informacji, która w znacznej części nie jest wykorzystywana, a równocześnie najczęściej występuje konieczność wykorzystania wielowymiarowego wektora diagnostycznego. Powoduje to konieczność zredukowania wykorzystywanej informacji do poziomu pozwalającego na zbudowanie adekwatnego modelu diagnostycznego. Jedną z metod diagnozowania maszyn jest korelacja obiektywnego stanu technicznego z parametrami diagnostycznymi uzyskanym z sygnału wibroakustycznego. Korzystając z metody składowych głównych (PCA) istnieje możliwość uzyskania liniowego przekształcenia tych parametrów. Pozwala to zredukować redundantną informację zawartą w tych parametrach i uzyskać bardziej wiarygodny model diagnostyczny. Obiektem wybranym do badań zaprezentowanych w pracy był silnik o zapłonie samoczynnym. Stosowanie przedstawionej metody eliminuje konieczność wykonywania czasochłonnych i kosztownych modeli analitycznych. Możliwe jest diagnozowanie silnika na podstawie odpowiednio przygotowanego, wymiarowo zredukowanego sygnału wibroakustycznego, bez wykonywania modeli symulacyjnych.
Źródło:: Journal of KONES; 2008, 15, 4; 63-71
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "diesel engine diagnosis" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język