Temat: welding MIG - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Mechanical properties of 5083, 5059 and 7020 aluminium alloys and their joints welded by MIG
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/245438.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: welding MIG
aluminum alloys
mechanical properties
Opis:: The article presents the research results on the mechanical properties of aluminum alloy 7020 and its MIG welded joints. For comparison alloy 5083 - the most currently used in shipbuilding alloy was chosen as well as 5059 -the new high-strength alloy. Besides the native material alloys there were investigated their joints welded by MIG -the same method as alloy 7020. Welding parameters used for the connection of the sheets made of 7020, 5083 and 5059 alloys were presented. Metallographic analysis showed the correct construction of structural bonded joints. The arc welding method - MIG is the most common method of joining aluminum alloys used in shipbuilding. It replaces the TIG method of providing equally high quality of joints with a much higher performance. The research was carried out using a static tensile test in accordance with the requirements of the Polish Standard PN-EN 10002:2004. Flat samples cut perpendicular to the direction of rolling were used. The research was conducted at the temperature of + 20 centigrade. The 7020 alloy has higher strength properties then alloys: 5083 and 5059. The yield stress is higher by 14.8% compared to 5083 alloy, and by 11.7% compared to the alloy 5059. Plastic properties of an alloy 7020 are the lowest, but with reserves meet the requirements of classification societies. The joints welded by MIG of 7020 alloy have higher strength properties then joints of alloys: 5083 and 5059. Plastic properties of alloy 7020 compared to 5083 alloy are smaller and at the same level as the connector alloy 5059.
Źródło:: Journal of KONES; 2011, 18, 3; 73-77
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Influence of joining method for hardness distribution in joints of AlZnSMg1 alloy
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/247544.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: friction stir welding (FSW)
welding MIG
aluminium alloys
hardness distribution
Opis:: The article presents the research results of hardness values distribution of friction s tir welded joint (FSW) alloy AW 7020 (AlZn5Mg1). The joints welded by traditional MIG method of the same aluminium alloy were chosen as reference points. Friction stir welding (FSW) - a new technology can be successfully used for butt welding of sheet metal with different types of aluminium alloys. The parameters of friction stir welding (FSW) and MIG welding used to join metal alloy AlZn5Mg1 (7020) were presented. Metallographic analysis showed the correct structured both MIG welded joints and FSW welded aluminum alloy 7020. The study was carried out using Vickers hardness HV5 accordance with the requirements of the Polish Standard PN-EN 1043-1:2000. The study was conducted in three rows, and the indenter load was 50 N. In order to determine the structural changes in the bonded joints, the samples were polished and then micro-etched KELLER reagent. Metallographic examination was carried out using optical microscope Axiovert ZAISS 25. Metallographic examination revealed the existence of an explicit heat affected zone of HAZ in case of MIG welded joints and virtually lack there of, in case of FSW welded joints. In case of FSW welded joint, maximum hardness was observed in the middle of joint, but at a distance of approximately 25 mm from the middle of the weld there is a hardness decrease of about 10% relative to the base material. In the MIG weldedjoint lowest hardness of the weld occurred in the middle of the joint.
Źródło:: Journal of KONES; 2010, 17, 4; 137-141
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Influence of friction stir welding on impact resistance of AlZn5Mg1 alloy joints
Wpływ zgrzewania tarciowego FSW na udarność złączy spajanych stopu AlZnSMgl
Autorzy:: Dudzik, K.
Czechowski, M.
Powiązania:: https://bibliotekanauki.pl/articles/242212.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: zgrzewanie tarciowe FSW
spawanie MIG
stopy aluminium
udarność
friction stir welding (FSW)
aluminium alloys
impact resistance
welding MIG
Opis:: The paper presents the research results on impact resistance of friction s tir welded aluminum alloy A W 7020 [AlZn5MglJ. The joints welded by traditional MIG method of the same aluminium alloy were chosen as reference points. Friction Stir Welding (FSW) - a new technology can be successfully used for butt welding of different types of aluminum alloy sheets. The parameters for friction stir welding of sheets made of AlZn5Mgl [7020] alloy were introduced in the article. Metallographic analysis of bonds showed proper structural construction of the friction stir welded 7020 aluminum alloys. The impact resistance was examined via the Charpy test according to PN-EN 10045-1. During test the hammer angle of deflection beta after hitting was noted and next the brake work "L " and impact resistance "U" were determined. The tests were carried out on typical specimens of cuboids shape (55x10x10 mm), with "V" notch. The research was conducted at the temperature of + 20°C. After impact resistance test the failure surface of specimens was analyzed by scanning with electron microscope SEM Philips XL30. The research of impact resistance showed that the values of 7020 alloy welded by FSW method were higher compared to the properties of 7020 alloy joints welded by traditional MIG method — the average impact resistance was about 18% higher in case ofFSW then in MG.
W artykule przedstawiono wyniki badań udarności złączy zgrzewanych tarciowo (FSW) stopu AW 7020 (AlZn5Mgl). Jako punkt odniesienia wybrano zlącza tego samego stopu spawane tradycyjną metodą MIG. Nową technologię zgrzewania tarciowego z przemieszaniem materiału zgrzeiny FSW (Friction Stir Welding) można z powodzeniem stosować do zgrzewania doczołowego blach z różnego rodzaju stopów aluminium. Przedstawiono parametry zgrzewania tarciowego (FSW) zastosowane do połączenia blach ze stopu AlZn5Mgl (7020). Analiza metalograficzna wykazała poprawną budowę strukturalną złączy zgrzewanych stopu aluminium 7020. Badania udarności przeprowadzono metodą Charpy'ego zgodnie z wymaganiami Polskiej Normy PN-EN 10045-1. Podczas badań odczytano kąt wychylenia młota po uderzeniu beta a następnie wyznaczono pracę łamania L oraz udarność U. Próbki do badań udarności wykonano jako standardowe, w kształcie prostopadłościanu o wymiarach 55x10x10 mm z zalecaną przez normę dokładnością š0,1 mm, w których wycięto karb w kształcie litery V. Próbę przeprowadzono w temperaturze + 20°C. Po badaniach udarności przeprowadzono analizę powierzchni przełomów próbek za pomocą mikroskopu elektronowego (SEM) Philips XL3O. Badania udarności złączy stopu 7020 wykazały wyższą wartość udarności w przypadku zastosowania zgrzewania tarciowego FSW w porównaniu do tradycyjnej metody spawalniczej MIG - średnio udarność była wyższa o ok. 18%.
Źródło:: Journal of KONES; 2009, 16, 3; 93-98
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Low - cycle fatigue of Al-Mg alloy joints
Autorzy:: Czechowski, M.
Powiązania:: https://bibliotekanauki.pl/articles/247917.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: corrosion fatigue
Al-Mg alloy
MIG welding
Opis:: This article presents the results of the low-cycle fatigue tests of AW-5059 Alustar alloy. Gas metallic welding in argon arc shield was used. Metallographic analysis of bonds showed a proper structural construction MIG welded 5059 aluminum alloy. The low-cycle fatigue tests were carried out in the air and artificial seawater (3.5% water solution NaCl), with stable amplitude of stress value. The stresses were changed in the symmetric cycle (the stress ratio was R = -1) with constant strain rate of 5mm/min and the frequencies oscillating between 0.08-0.2 Hz. During the tests the following parameters was observed: number of cycles until the specimen's destruction, upper and lower extreme values of force and strain for the selected cycles, duration-time of the test and frequency. Analysis of specimens fracture surfaces was performed with scanning electron microscope (SEM) Philips XL30. In case of the specimens exposed in 3,5% water solution NaCl the fatigue durability is lower than the durability of specimens tested in the air. The article depicts the changes in total strain amplitude Iac [mm] depending on number of cycles [N] obtained in the tests with ia=const and the low-cycle fatigue resistance for the welded Alustar alloy. Original value are received results of the low-cycle fatigue tests of AW-5059 Alustar alloy welded by MIG
Źródło:: Journal of KONES; 2012, 19, 2; 103-108
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The influence of joining method of AW-7020 aluminium alloy on corrosion properties
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/247476.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aluminium alloys
friction stir welding (FSW)
MIG welding
corrosion
Opis:: The results of corrosion properties research of aluminum alloy AW 7020 (AlZn5Mg1) welded by friction stir welding FSW and MIG were presented. Friction Stir Welding (FSW) - a new technology can be successfully used for butt welding of different types of aluminum alloy sheets. In the article the parameters for friction stir welding of sheets made of AlZn5Mg1 [7020] alloy was presented as well as parameters for MIG. Metallographic analysis of bonds showed a proper structural construction of both, the FSW and MIG welded 7020 aluminum alloys. The polarization was carried out at changes in the potential speed of 12 mV/min in the range of š 50 mV with the stationary potential. Atlas 0531EU & IA potentiostat was used for studies. The corrosion resistance research was carried out using three electrode potentiodynamic method. The following parameters were measured: electrode potential Ec [mV] and the corrosion current density Jc [mi A/cm2]. The tests were carried out on specimens in 3.5% water solution NaCl. Good resistance to electrochemical corrosion was found of the native material, friction stir welded and MIG welded 7020 aluminum alloys. Original value are received results of the corrosion properties of new method friction stir welded AlZn5Mg1 alloy compared with traditional MIG method and the native material.
Źródło:: Journal of KONES; 2011, 18, 4; 587-581
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: EIS research of AW - 7020 alloy joints welded by MIG
Autorzy:: Dudzik, K.
Charchalis, A.
Powiązania:: https://bibliotekanauki.pl/articles/248097.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: electrochemical impedance spectroscopy (EIS)
aluminium alloys
MIG welding
corrosion
Opis:: The results of corrosion properties research of aluminum alloy AW 7020 (AlZn5Mg1) welded by MIG were presented. In the article the parameters for MIG welding of sheets made of AlZn5Mg1 (7020) alloy was presented. Metallographic analysis of bonds showed a proper structural construction MIG welded 7020 aluminum alloy. EIS measurement was performed in three electrode system in artificial seawater (3.5% NaCl). Impedance studies were carried out at the corrosion potential. Changed voltage signal amplitude in the range plus or minus 10 mV and frequency range of changes was as follows: 100 kHz - 0.1 Hz. Atlas 0531 EU and IA potentiostat was used for studies. Model in the form of an electrical equivalent circuit replacement was chosen for the test object. The results of electrochemical impedance spectroscopy are presented graphically in the Nyquist charts matched with the theoretical curve to them and in the form of parameters characterizing the corrosion process. Obtained results were statistically analyzed. Much better resistance to electrochemical corrosion was found for the native material then joint welded by MIG of 7020 aluminum alloy. The most important parameter - charge transfer resistance value of a double layer Rct for sample of native material is higher than for the sample welded by MIG. Original value is received results of the corrosion properties of MIG welded AlZn5Mg1 alloy compared with the native material.
Źródło:: Journal of KONES; 2012, 19, 1; 83-88
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Microscopic examination of AlZn5Mg1 alloy joints welded by FSW and MIG
Autorzy:: Dudzik, K.
Charchalis, A.
Jurczak, W.
Powiązania:: https://bibliotekanauki.pl/articles/247908.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: microscopic examination
aluminium alloys
friction stir welding (FSW)
MIG welding
grain size
Opis:: The article presents the research results of microscopic examination of friction stir welded joint (FSW) alloy AW 7020 (AlZn5Mg1). The joints welded by traditional MIG method of the same aluminium alloy were chosen as reference points. Friction stir welding (FSW) - a new technology can be successfully used for butt welding of sheet metal with different types of aluminium alloys. The parameters of friction stir welding (FSW) and MIG welding used to join metal alloy AlZn5Mg1 (7020) were presented. Welds made using both the FSW and MIG method were checked using X-ray flaw detection and showed no welding defects. In order to determine the structural changes in the bonded joints, the samples were polished and then microetched KELLER reagent. Metallographic examination was carried out using optical microscope Axiovert ZAISS 25. To determine the grain size in the different zones of joints welded by FSW and MIG methods AxioVision 4.8.2 software was used. Metallographic examination revealed the existence of an explicit heat affected zone of HAZ in case of MIG welded joints and virtually lack thereof, in case of FSW welded joints. Microscopic examination of AlZn5Mg1 alloy joints showed that the structure of the FSW welded joint is more homogeneous than the MIG welded joint. The analysis of the grain size of the characteristic zones of joints shows that in the case of joints welded by FSW the weld nugget has smaller grains than the native material. In case of the joint welded by traditional MIG method the biggest grains are in HAZ and the smallest in the native material.
Źródło:: Journal of KONES; 2012, 19, 2; 129-135
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Advantages of new micro-jet welding technology on weld microstructure control
Zalety nowej technologii spawania mikrojetowego dotyczące kontroli mikrostruktury spoiny
Autorzy:: Piwnik, M.
Węgrzyn, T.
Wieszała, R.
Hadryś, D.
Powiązania:: https://bibliotekanauki.pl/articles/374791.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:: micro-jet cooling
MIG welding
steel welding structure
chłodzenie mikro-jet
spawanie MIG
struktura spawania stali
Opis:: An innovative apparatus to welding process with micro-jet cooling of the weld made it possible to carry out technological tests, which have proved theoretical considerations about this problem. This project gives real opportunities for professional development in the field of welding with controlling the parameters of weld structure. These tests have proved that the new micro-jet technology has the potential for growth. It may be great achievement of welding technology in order to increase weld metal strength. The new technology with micro-jet cooling may have many practical applications in many fields, for example such as in the transport industry or to repair damaged metal elements. The advantages of the new device over the traditional system are the ability to control the structure of the weld, the weld mechanical performance increases and improve the quality of welded joints
W artykule przedstawiono innowacyjną technologię spawania z wykorzystaniem chłodzenia mikrojetowego dla połączeń spawanych konstrukcji samochodowych. Przedstawiono rozważania teoretyczne i kierunki rozwoju oraz wyniki przeprowadzonych prób technologicznych. Wykazano, że ta innowacyjna technologia jako pierwsza na świecie daje realne możliwości kontrolowania parametrów struktury spoiny w trakcie realizacji procesu spawalniczego. W przyszłości będzie możliwe uzyskanie określonej struktury spoiny bez dodatkowej obróbki, co znacznie skróci czas przygotowania wyrobów, a także poprawi jakość spoiny np. przez wzrost wytrzymałości. Nowa technologia mikrojetowa może mieć dużo praktycznych zastosowań w wielu dziedzinach, takich jak przemysł transportowy, lub może być wykorzystana do naprawy uszkodzonych elementów metalowych w tym wałów maszynowych. Zaletami nowego urządzenia w porównaniu z systemem tradycyjnym są możliwość sterowania strukturą spoiny, polepszenie parametrów mechanicznych spoiny i poprawa jakości złącz spawanych. ves real opportunities for professional development in the field of welding with controlling the parameters of weld structure. These tests have proved that the new micro-jet technology has the potential for growth. It may be great achievement of welding technology in order to increase weld metal strength. The new technology with micro-jet cooling may have many practical applications in many fields, for example such as in the transport industry or to repair damaged metal elements. The advantages of the new device over the traditional system are the ability to control the structure of the weld, the weld mechanical performance increases and improve the quality of welded joints.
Źródło:: Transport Problems; 2013, 8, 2; 47-54
1896-0596
2300-861X
Pojawia się w:: Transport Problems
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Ultrasonic-vibration assisted arc-welding of aluminum alloys
Autorzy:: Krajewski, A.
Włosiński, W.
Chmielewski, T.
Kołodziejczak, P.
Powiązania:: https://bibliotekanauki.pl/articles/201701.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: ultrasonic vibrations
MIG/TIG welding
aluminum alloys
structure
microhardness
Opis:: The structure and hardness of the surface-welds and fusion-welds made on a 2017A aluminum alloy waveguide using the MIG and TIG methods with and without the participation of ultrasonic vibrations were examined. Cross-sections of the fusions and surface-welds thus obtained were observed in a microscope and the hardness distributions were determined. The aim of the study was to analyze the effects of the ultrasonic vibrations applied to the melted metal pool by a vibrating substrate which in our experiments was a waveguide. The interactions of the ultrasonic vibrations with the molten metal during its solidification and also with the heat-affected zone were examined at various phases of the vibration wave. The ultrasonic vibrations affected the structure of a weld. These changes are strongly depended on the wave phase.
Źródło:: Bulletin of the Polish Academy of Sciences. Technical Sciences; 2012, 60, 4; 841-852
0239-7528
Pojawia się w:: Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Stress corrosion cracking of 7020 aluminium alloy jointed by different welding methods
Autorzy:: Dudzik, K.
Powiązania:: https://bibliotekanauki.pl/articles/247592.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aluminium alloys
friction stir welding (FSW)
MIG welding
stress corrosion cracking
mechanical properties
slow-strain-rate-testing
Opis:: The results of stress corrosion cracking (SCC) of aluminum alloy AW 7020 [AlZn5Mg1] welded by friction stir welding FSW and MIG were presented. Friction Stir Welding (FSW) - a new technology can be successfully used for butt welding of different types of aluminum alloy sheets. In the article the parameters for friction stir welding ofsheets made of AlZn5Mg1 [7020] alloy was presented as well as parameters for MIG. Metallographic analysis of bonds showed a proper structural construction of both, the FSW and MIG welded 7020 aluminum alloys. Stress corrosion cracking was examined via the slow-strain-rate-testing (SSRT) according to EN ISO 7539-7. The following parameters were measured: time-to-failure - T [h], obtained max. load - F [N]; strain energy (the diagram surface under the stress-elongation curve) - E [MJ/m3]; relative elongation of the specimen — a10 [%]; max. tensile stress — R [MPa] and contraction — Z [%]. The tests were carried out on cylindrical notch-free specimens in the air and 3.5% water solution NaCl. Good resistance to stress corrosion was found of friction stir welded 7020 aluminum alloys. The tested samples cracked during SSRT test in the native material in case of FSW and in the joint in case of MIG. Original value are received results of the stress corrosion resistance of new method friction stir welded AlZn5Mg1 alloy compared with traditional MIG method.
Źródło:: Journal of KONES; 2010, 17, 4; 143-147
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Fatigue Behavior of MIG-Welded 7N01-T4 Aluminum Alloy with Different V-Groove Angles
Autorzy:: Ma, Zhongwei
Li, Qinghua
Ma, Lin
He, Zhaokun
Liang, Zhimin
Powiązania:: https://bibliotekanauki.pl/articles/351758.pdf
Data publikacji:: 2019
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: 7N01-T4 aluminum alloy
MIG welding
V-groove angle
fatigue
fracture
Opis:: 7N01-T4 aluminum alloy was welded by metal inert gas welding and the influence of V-groove angle on joint fatigue properties was investigated. The results indicate that the volume of fusion zone (FZ) and the grains in FZ become small when the groove angle decreases to 50° from 70°. Most pores distribute at the FZ edge and fewer pores are formed in the small angle joint. The fatigue crack mainly initiates at the transition region between the weld passes due to the pore concentration. The small angle contributes to increasing joint fatigue properties, especially at the low stress level. The fatigue strength of 50° joint is 103.06 MPa which is 15.3% higher than that of 70° joint.
Źródło:: Archives of Metallurgy and Materials; 2019, 64, 4; 1577-1584
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: MIG welding of austenitic 316L steel used in means of transport
Autorzy:: Szczucka-Lasota, Bożena
Węgrzyn, Tomasz
Powiązania:: https://bibliotekanauki.pl/articles/2203054.pdf
Data publikacji:: 2022
Wydawca:: Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:: civil engineering
transport
mobile platforms
MIG welding
316L steel
inżynieria lądowa
platforma ruchoma
spawanie MIG
stal 316L
Opis:: The austenitic 316L steel (1.4401) is an important stainless material used to build various means of transport. Austenitic steel has high resistance to atmospheric corrosion. The austenitic steel is treated as a good weldable material, although cracks are possible. This paper analyses the influence of various MIG welding parameters on the creation of correct joints used in the stainless steel structures of mobile platforms elements, as an example of welding structures, in various means of transport. Various tests verifying the mechanical properties of MIG welds, including non-destructive tests, tensile strength and hardness tests, were carried out. This article aims to show how important and complex the task is to select the correct welding parameters for elements of means of transport made of austenitic steel on the example of elements of mobile platforms.
Źródło:: Zeszyty Naukowe. Transport / Politechnika Śląska; 2022, 116; 247--256
0209-3324
2450-1549
Pojawia się w:: Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Mechanical properties of AW-5083 alloy joints welded by hybrid method : FSW and MIG
Autorzy:: Dudzik, Krzysztof
Powiązania:: https://bibliotekanauki.pl/articles/241583.pdf
Data publikacji:: 2019
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: hybrid welding
Friction Stir Welding
FSW
welding
MIG
aluminium alloys
joints
mechanical properties
shipbuilding
Opis:: The article presents the research results on the mechanical properties of aluminum alloy AW-5083 and its joints welded by hybrid method – traditional MIG and FSW. AW-5083 alloy is the most currently used in shipbuilding industry. Friction Stir Welding (FSW) – a new technology can be successfully used for butt-welding of different types of aluminum alloy sheets. FSW method can be an alternative to traditional arc welding methods i.e. MIG or TIG. Hybrid welding (FSW with MIG or TIG) could be used in cases when joining only by FSW is not possible. Welding parameters used for the connection of the sheets were presented. Metallographic analysis showed the correct construction of structural bonded joints. The research was carried out using a static tensile test in accordance with the requirements of the Standard PN-EN ISO 4136:2013-05. Flat samples cut perpendicular to the direction of rolling were used. The research was conducted at the temperature of +20ºC. The test shows that the mechanical properties of joints made by hybrid method compered to native material were lower. The tensile strength of joint was lower by 20% then native material 5083 while its yield stress was lower only about 6%. The biggest change was observed in case of plastic properties. Elongation of joint was over 50% lower compared to native material. Despite the decrease of mechanical properties, they meets the requirements of classification societies, so the conclusion is that hybrid method (FSW and MIG) of joining AW-5083 can be applied in shipbuilding industry.
Źródło:: Journal of KONES; 2019, 26, 4; 47-52
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: The influence of welding method on microstructure and mechanical properties of aluminum alloys joints
Wpływ metody spawania na mikrostrukturę i właściwości mechaniczne złączy ze stopów aluminium
Autorzy:: Noga, Piotr
Richert, Maria
Węglowski, Marek Stanisław
Powiązania:: https://bibliotekanauki.pl/articles/264317.pdf
Data publikacji:: 2019
Wydawca:: Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:: aluminum alloys welding
aluminum alloys
welding
TIG
MIG
EBW
FSW
spawanie stopów aluminium
stopy aluminium
spawanie
Opis:: Rapid technological progress in recent years has led to an intensified interest in alternative methods of joining metals. Today’s industry is constantly demanding new joining processes, which enable high-quality welded joints in a wide range of thicknesses of combined materials at low production cost. There are at least several dozen welding methods currently available. The selection of the process depends on the type of welded materials, acceptable heat input, as well as future working conditions. The paper presents the results of the microstructural examination and mechanical properties of joints of the aluminum alloy for plastic working such as EN AW-6082. The paper presents the results of microstructural observations and mechanical properties of EN AW-6082 aluminum alloy. Methods used for joining were successively TIG (welding with a non-consumable electrode in a shield of inert gases), MIG (welding with a consumable electrode in a shield of inert gases), EBW (electron beam welding) along with FSW (friction stir welding method). TIG (welding with a non-consumable electrode in a shield of inert gases), MIG (welding with a consumable electrode in a shield of inert gases), EBW (electron beam welding) along with FSW (friction stir welding method) were used as joining techniques.
Współczesny przemysł wymaga opracowania i udoskonalania metod, które umożliwiają uzyskanie wysokiej jakości połączeń w szerokim zakresie grubości łączonych materiałów oraz obniżenie kosztu produkcji. Istnieje kilkadziesiąt metod spawania. Proces ten trzeba dostosować do rodzaju spajanych materiałów, dostępnych źródeł energii, a także do przyszłych warunków pracy urządzeń. W pracy przedstawiono wyniki badań łączenia najpopularniejszego stopu do przeróbki plastycznej, jakim jest stop EN AW-6082. Metodami wykorzystanymi do łączenia były zarówno najbardziej popularne techniki spawania: TIG (spawanie elektrodą nietopliwą w osłonie gazów obojętnych), MIG (spawanie elektrodą topliwą w osłonie gazów obojętnych), metoda wysokoenergetyczna EBW (spawanie wiązką elektronową), jak również metoda zgrzewania tarciowego z mieszaniem materiały zgrzeiny – FSW.
Źródło:: Metallurgy and Foundry Engineering; 2019, 45, 2; 43-50
1230-2325
2300-8377
Pojawia się w:: Metallurgy and Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: The use of compressed air for micro-jet cooling after MIG welding
Autorzy:: Hadryś, D.
Węgrzyn, T.
Piwnik, J.
Stanik, Z.
Tarasiuk, W.
Powiązania:: https://bibliotekanauki.pl/articles/355175.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: MIG
welding
micro-jet
nitrogen and oxygen in WMD
acicular ferrite
impact toughness
compressed air
Opis:: The material selected for this investigation was low alloy steel weld metal deposit (WMD) after MIG welding with micro-jet cooling. The present investigation w*as aimed as the following tasks: obtained WMD with various amount of acicular ferrite and further analyze impact toughness of WMD in terms of acicular ferrite amount in it. Weld metal deposit (WMD) was first time carried out for MIG welding with micro-jet cooling of compressed air and gas mixture of argon and air. Until that moment only argon, helium and nitrogen were tested as micro-jet gases for MIG/MAG processes. An important role in the interpretation of the results can give methods of artificial intelligence.
Źródło:: Archives of Metallurgy and Materials; 2016, 61, 3; 1405-1408
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "welding MIG" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język