Temat: welded constructions - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Fatigue strength analysis of welded aluminium stairs
Autorzy:: Jastrzębski, M.
Misztela, A.
Gołoś, K.
Powiązania:: https://bibliotekanauki.pl/articles/244513.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: fatigue test
welded joints
aluminium thin-walled constructions
test zmęczeniowy
połączenia spawane
aluminiowa konstrukcja cienkościenna
Opis:: The article presents numerical analyses and results of experimental fatigue tests of the welded stairs made from prefabricated EN-AW 6063-T66 aluminium alloy thin-walled profiles. Fatigue life analysis of welded thin-walled structures is a complicated and demanding task. Fatigue analysis of stairs was carried out according to the concept of a weak link, which was verified experimentally. The FEM method was applied in strength analysis. The conducted research allowed identifying the weak link of the structure at the welded joint. The samples stairs were subjected to fatigue tests. The fatigue tests have been conducted using specially designed set up. The experiments confirmed the numerical analysis. The cracks occurred at welded joints before expected fatigue life to fracture. Then the stairs structure was modified by changing the weld joints arrangement. The fatigue tests were carried out again and showed further weaknesses of their structure cracking of the step profile. To precisely capture this problem, detail finite element calculations for the analysed stairs have been conducted. Applying the nominal stress method, this problem was solved changing the treads profile of the stairs step. The last improvement in the construction was sufficient to satisfy fatigue strength requirement of the analysed structure. The weak link approach and nominal stress method proved to be an effective tool in fatigue analysis of the examined structure.
Źródło:: Journal of KONES; 2018, 25, 1; 177-184
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Requirements Relating to Manufacturing Constructions in The Aspect of Conducting Ultrasonic Testing
Wymagania odnośnie wytwarzania konstrukcji w aspekcie przeprowadzania badań ultradźwiękowych
Autorzy:: Kaczmarek, R.
Krawczyk, R.
Powiązania:: https://bibliotekanauki.pl/articles/354623.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: ultrasonic testing
welded joint
welded constructions
non-destructive testing of welds
badania ultradźwiękowe
spoina
konstrukcje spawane
badania nieniszczące spoin
Opis:: Basic factors which have an influence on conducting manual ultrasonic testing of joints in the welded constructions are presented in the following article. These factors are specified on the base of the guidelines referring to conditions and methods of carrying out examinations which are currently in force in the following standards PN-EN ISO 17640 and PN-EN ISO 22825. Due to the vastness of subject of ultrasonic testing the main aim of the following article is to collect all important information which relates to design and manufacture of constructions and has a key influence on the following examinations.
W pracy zawarto analizę podstawowych czynników mających wpływ na możliwość wykonania ręcznych badań ultradźwiękowych złączy w konstrukcjach spawanych. Czynniki te oparto na wymaganiach obowiązujących norm przedmiotowych PN-EN ISO 17640 i PN-EN ISO 22825 w odniesieniu do warunków oraz sposobu przeprowadzenia badań. Celem publikacji było omówienie najistotniejszych informacji dotyczących projektowania i wykonywania złączy mających kluczowy wpływ na późniejszą kontrolę ultradźwiękową.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 3A; 1633-1638
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The weldability assessment of thermally hardened S540Q steel sheets
Autorzy:: Cicholska, M.
Powiązania:: https://bibliotekanauki.pl/articles/243177.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: low-alloyed quality steels
heat treatment of S540Q steel
welded constructions
Opis:: High strength thermally hardened steels are more difficult to weld than low carbon construction steels. There is a danger of cold cracking caused by the presence of martensite in welded joints. The thermally hardened 12 mm sheets of S540Q steel underwent research. The sheets were welded semi-automatically by MAG method, in the welding conditions usually applied in industry for welding normalized sheets of this steel. The welding technology was presented. The X-ray tests were performer, which confirmed the achievement of metallically continuous joints. Samples were taken from the joints and the joints hardness distribution measurements were conducted. The microstructure was examined and the static tensile tests as well as technological bend tests were carried out. Hardness measurements were performed in three measurement lines for each joint according to PN-EN 1043-1:2000 requirements. Joints microstructures were examined in the joints axis, in HAZ and in native materials. Steel microstructures were classified as low carbon tempered matrensite of layered construction. Mean values of the selected joints tensile strengths were also presented. The tensile tests values of native materials of metallurgic certificates were given for the sake of comparison. The research results presented in the paper made it possible to determine the weldability of S540Q steel.
Źródło:: Journal of KONES; 2014, 21, 4; 43-48
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Suitability analysis of thermally hardened S540Q steel sheets for welded constructions working in low temperatures
Autorzy:: Cicholska, M.
Powiązania:: https://bibliotekanauki.pl/articles/246570.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: low-alloyed quality steels
heat treatment of S540Q steel
welded constructions
Opis:: The conventional heat treatment is being replaced by thermal-plastic treatment. The process of steel hardening is carried out on quenching press with a double-sided water spray at the temperatures ranging from 600 to 700°C. The steel hardening process is conducted at the temperatures of 600-700°C with cooling in the air. After this, thermal hardening the steel sheets obtain the structure of a layered tempered matrensite with carbide and cyanide disperse separations The thermally hardened S540Q steel sheets 12 mm thick underwent examinations. The welding technology was presented. The sheets were welded semi automatically by means of MAG method. The usual welding conditions normally applied in industry were used after steel standardisations. The achievement of joints metallically continuous was confirmed by X-ray tests. The static tensile test was conducted to assess the applicability of this steel. The average values of the welded joints resistance to tensile strength were given. After conducting technological bend, test good ductility was noted. Steel microstructure was defined as low carbon tempered matrensite of layered construction. Microstructure observation was carried out in the joint axis, in heat affected zone and in native material. Hardness measurements were performed according to PN-EN 1043-1:2000 requirements. Impact test was conducted on the samples with a V cut notch at the temperatures of -20, -40, -60 Celsius degrees.
Źródło:: Journal of KONES; 2013, 20, 3; 105-109
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Suitability analysis of thermally hardened S620Q steel sheets used for welded constructions working in lowered temperatures
Autorzy:: Cicholska, M.
Powiązania:: https://bibliotekanauki.pl/articles/247532.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ow-alloyed quality steels
heat treatment of S620Q steel
welded constructions
Opis:: S620Q steel sheets 12 mm thick that were heat treated were subjected to research. The sheets weldability was examined during semi-automatic welding by MAG method, at the welding conditions usually applied in industry for welding normalized sheets of this steel. The achievement of metallically continuous joints was confirmed by X-ray examination, the correctness of making test joints was confirmed by the measurement of transverse warp and edges of sample sections. Moreover the following tests were carried out: static tensile tests, technological bending tests and impact tests on the samples with V-notch cut in positions S, P, C2 and C5. The joints microstructure was observed in the weld axis, in SWC and in native materials with the use of Neophot-2 optical microscope. Steel microstructure was classified as low-carbon, tempered martensite of layered construction. The bend tests were carried out by means of bending arbour 36mm in diameter. The impact energy values for test temperatures -60°C, -40°C and -20°C marked in the drawings are the mean values of breaking three samples at a given test temperature. The places ofnotches cuts applied on welded joints samples are required by Det Norske Veritas regulations for welded joints. Mechanical properties ofS620Q steel were given as reference.
Źródło:: Journal of KONES; 2010, 17, 4; 103-108
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "welded constructions" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język