Temat: wear resistant alloy - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Effect of the carbides and matrix on the wear resistance of nodular cast iron
Autorzy:: Gumienny, G.
Powiązania:: https://bibliotekanauki.pl/articles/380497.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: wear resistant alloy
carbidic nodular cast iron
wear resistance
ADI
stop odporny na ścieranie
żeliwo sferoidalne
odporność na zużycie
Opis:: This paper presents the results of the abrasive wear resistance of selected types of nodular cast iron, including ADI, cooperating with quartz sand and 100 grit abrasive paper. It has been shown that carbides in nodular cast iron cause an increase in wear resistance of 6 to 12% depending on the surface fraction of the carbides and type of the matrix. For the same unit pressure the mass loss of the cast iron cooperating with quartz sand is many times larger than the cast iron cooperating with abrasive paper. For both abrasives the highest wear resistance showed nodular cast iron with upper and lower bainite and carbides.
Źródło:: Archives of Foundry Engineering; 2013, 13, 3; 25-29
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Microstructure of Cast Ni-Cr-Al-C Alloy
Mikrostruktura lanego stopu z układu Ni-Cr-Al-C
Autorzy:: Cios, G.
Bała, P.
Stępień, M.
Górecki, K.
Powiązania:: https://bibliotekanauki.pl/articles/355780.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: nickel-based alloy
chromium carbides
cast alloy
wear resistant alloy
stop na osnowie niklu
węglik chromu
stop odlewniczy
stop odporny na ścieranie
Opis:: Nickel based alloys, especially nickel based superalloys have gained the advantage over other alloys in the field of high temperature applications, and thus become irreplaceable at high temperature creep and aggressive corrosion environments, such as jet engines and steam turbines. However, the wear resistance of these alloys is insufficient at high temperatures. This work describes a microstructure of a new cast alloy. The microstructure consists of γ matrix strengthened by γ’ fine precipitates (dendrites) improving the high temperature strength and of Chromium Cr7C3 primary carbides (in interdendritic eutectics) which are designed to improve wear resistance as well as the high temperature strength.
Stopy na osnowie niklu, a w szczególności superstopy na osnowie niklu zyskały przewagę w stosunku do innych stopów metali na polu zastosowań w wysokiej temperaturze. Są niezastąpione w warunkach pełzania wysokotemperaturowego, a także agresywnym środowisku korozyjnym silników odrzutowych czy tez turbin parowych. Jednakże odporność na ścieranie tych stopów jest niewystarczalna do zastosowania tych materiałów w wysokiej temperaturze i warunkach ścierania. W niniejszej pracy opisano mikrostrukturę nowego stopu. Składa się ona z osnowy γ umocnionej fazą γ’ (dendryty) - zwiększającą wytrzymałość wysokotemperaturową, a także z pierwotnych węglików chromu Cr7C3 (w eutektykach międzydentrytycznych) - mających na celu zwiększyć zarówno odporność na ścieranie jak i wytrzymałość wysokotemperaturową.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 1; 145-148
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Cavitation Erosion of Nodular Cast Iron - Microstructural Effects
Autorzy:: Orłowicz, A. W.
Mróz, M.
Tupaj, M.
Trytek, A.
Jacek, M.
Radoń, M.
Powiązania:: https://bibliotekanauki.pl/articles/379634.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: wear resistant alloy
nodular cast iron
cavitation erosion
distilled water
stop odporny na ścieranie
żeliwo sferoidalne
erozja kawitacyjna
woda destylowana
Opis:: The paper deals with susceptibility of nodular cast iron with ferritic-pearlitic matrix on cavitation erosion. Cavitation tests were carried out with the use of a cavitation erosion vibratory apparatus employing a vibration exciter operated at frequency of 20 kHz. The study allowed to determine the sequence of subsequent stages in which microstructure of cast iron in superficial regions is subject to degradation. The first features to be damaged are graphite precipitates. The ferritic matrix of the alloy turned out to be definitely less resistant to cavitation erosion compared to the pearlitic matrix component.
Źródło:: Archives of Foundry Engineering; 2017, 17, 4; 119-122
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Structures of the EL-Hard Padding Welds as a Function of the Abrasive Wear Resistance
Autorzy:: Napiórkowski, J.
Konat, Ł.
Pękalski, G.
Kołakowski, K.
Powiązania:: https://bibliotekanauki.pl/articles/381810.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: wear resistant alloy
padding weld layer
operational characteristics
mechanical properties
structural properties
stop odporny na ścieranie
charakterystyka eksploatacyjna
właściwości mechaniczne
właściwości strukturalne
Opis:: In this work we report the phase structures of the EL-Hard padding weld layers and their effect on their abrasive wear resistance. The application of light and electron scanning microscopy examinations revealed subtle differences in the structures of the padding welds which affect their strength and usable properties. Abrasive wear resistance tests utilizing a “spinning bowl” method performed in real soil masses and hardness tests showed a close relationship between the abrasive wear resistance values and chemical composition of the tested padding welds. The obtained results are explained by the presence of the carbide - forming elements such as B, Cr, Mo, Nb, V and W in the chemical composition and types of the carbide phases present in the structures of the EL-Hard padding welds.
Źródło:: Archives of Foundry Engineering; 2013, 13, 1 spec.; 73-82
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Development of a New Tool Material for High Pressure Die Casting
Autorzy:: Herman, A.
Zikmund, P.
Tatíček, F.
Powiązania:: https://bibliotekanauki.pl/articles/382710.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
metallography
die material
HPDC technology
wear resistant alloy
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
metalografia
odlewanie ciśnieniowe
stop odporny na ścieranie
Opis:: The paper describes existing requirements for tool materials. In the light of experience with these supplied materials, we have demonstrated their considerable influence on the life of molds for die casting technology. From this research came the evaluation methodology of these tool materials which has been used for directing the development of a new material. Based on the new regulation of the chemical composition a sample was casted and forged after that. Then was determined the process of heat treatment and from a block of this material a mold insert was produced. This insert is now being tested in production.
Źródło:: Archives of Foundry Engineering; 2015, 15, 2; 23-28
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Assessment of Impact of Nickel Additions on Tin Bronzes
Autorzy:: Kozana, J.
Garbacz-Klempka, A.
Piękoś, M.
Czekaj, J.
Perek-Nowak, M.
Powiązania:: https://bibliotekanauki.pl/articles/382525.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: wear resistant alloys
tin bronze
microstructure
alloy additives
Cu–Sn–Ni alloy
stopy odporne na zużycie
brąz cynowy
mikrostruktura
dodatki stopowe
stop Cu-Sn-Ni
Opis:: High prices of tin and its limited resources, as well as several valuable properties characterising Cu-Sn alloys, cause searching for materials of similar or better properties at lower production costs. The influence of various nickel additions to CuSn10 casting bronze and to CuSn8 bronze of a decreased tin content was tested. Investigations comprised melting processes and casting of tin bronzes containing various nickel additions (up to 5%). The applied variable conditions of solidification and cooling of castings (metal and ceramic moulds) allowed to assess these alloys sensitivity in forming macro and microstructures. In order to determine the direction of changes in the analysed Cu-Sn-Ni alloys, the metallographic and strength tests were performed. In addition, the solidification character was analysed on the basis of the thermal analysis tests. The obtained results indicated the influence of nickel in the solidification and cooling ways of the analysed alloys (significantly increased temperatures of the solidification beginning along with increased nickel fractions in Cu-Sn alloys) as well as in the microstructure pattern (clearly visible grain size changes). The hardness and tensile strength values were also changed. It was found, that decreasing of the tin content in the analysed bronzes to which approximately 3% of nickel was added, was possible, while maintaining the same ultimate tensile strength (UTS) and hardness (HB) and improved plasticity (A5).
Źródło:: Archives of Foundry Engineering; 2018, 18, 1; 53-60
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Role of materials design in maintenance engineering in the context of industry 4.0 idea
Autorzy:: Dobrzański, L. A.
Powiązania:: https://bibliotekanauki.pl/articles/368329.pdf
Data publikacji:: 2019
Wydawca:: Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:: maintenance
4.0 stage of economy
industry development
materials development
designing material conservation and manufacturing 3MD
selective laser sintering
implant-scaffold
laser texturization
multicrystalline silicon cells
cracking counteraction
austenitic steel
TWIP steels
TRIP steel
wear-resistant
CVD coatings
PVD coatings
cutting tool materials
Al alloy matrix nanocomposites
carbon nanotubes
graphene
dye synthesised solar cells
ALD coatings
dentistry
photovoltaics
konserwacja
przemysł 4.0
rozwój przemysłu
rozwój materiałów
selektywne spiekanie laserowe
rusztowanie implantowe
teksturyzacja
ogniwa krzemowe
pękanie stali
stal austenityczna
stal TWIP
stal TRIP
odporność na ścieranie
powłoki CVD
powłoki PVD
narzędzia skrawające
nanokompozyty
osnowa aluminiowa
nanorurki węglowe
grafen
ogniwo słoneczne
powłoki ALD
stomatologia
fotowoltaika
Opis:: Purpose: The paper presents the issues of designing the maintenance of materials and products in accordance with the idea of Industry 4.0. The author's views on the need for augmentation of the Industry 4.0 model were also presented, as well as the author's original concept that hybrid activities in predictive maintenance and condition-based maintenance should be preceded by designing material, maintenance & manufacturing 3MD at the stage of the product's material designing and technological designing. The 3MD approach significantly reduces the frequency of assumed actions, procedures and resources necessary to remain the condition of this product for the longest possible time, enabling it to perform the designed working functions. Examples of own advanced research on several selected, newly developed materials, used in very different areas of application, confirmed the validity of the scientific hypothesis and the relationship between the studied phenomena and structural effects and the working functions of products and their maintenance and indicated that material design is one of the most important elements guaranteeing progress production at the stage of Industry 4.0 of the industrial revolution. Design/methodology/approach: The author's considerations are based on an extensive literature study and the results of the author's previous study and empirical work. Each of the examples given required the use of a full set of research methods available to modern material engineering, including HRTEM high-resolution transmission electron microscopy. Findings: The most interesting intellectual achievements contained in the paper include presentations of the author's original concepts regarding the augmentation of the Industry 4.0 model, which has been distributed so far, which not only requires augmentation but is actually only one of the 4 elements of the technology platform of the extended holistic model of current industrial development, concerning cyber-IT production aided system. The author also presents his own concept for designing material, maintenance and manufacturing 3MD already at the stage of material and technological design of the product, eliminating many problems related to product maintenance, even before they are manufactured and put into exploitation. Detailed results of detailed structural researches of several selected avant-garde engineering materials and discussion of structural changes that accompanying their manufacturing and/or processing are also included. Originality/value: The originality of the paper is associated with the novelty of the approach to analysing maintenance problems of materials and products, taking into account the requirements of the contemporary stage of Industry 4.0 development. The value of the paper is mainly associated with the presentation of original issues referred to as findings, including the concept of augmentation of the Industry 4.0 model and the introduction and experimental confirmation of the idea by designing material, maintenance and manufacturing 3MD.
Źródło:: Journal of Achievements in Materials and Manufacturing Engineering; 2019, 96, 1; 12-49
1734-8412
Pojawia się w:: Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "wear resistant alloy" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język