Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "waveforms" wg kryterium: Temat


Wyświetlanie 1-21 z 21
Tytuł:
Analysing applicability of selected methods to smooth indicator diagrams of marine medium-speed engine
Autorzy:
Pawletko, R.
Powiązania:
https://bibliotekanauki.pl/articles/259730.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
indicator diagrams
smoothing waveforms
filtering disturbances
Opis:
The article analyses the applicability of selected smoothing methods to smooth indicator diagram curves and to filter disturbances. An intermediate goal of the study was an attempt to extract disturbances recorded during pressure curve smoothing, which are believed to be a source of important diagnostic information. Within the framework of the reported analysis, a comparison was made between the moving average method, the Savitzky-Golay filter, and the frequency filtration method. The research was performed on a marine medium-speed engine Sulzer 3Al 25/30, which has a relatively long indicator passage.
Źródło:
Polish Maritime Research; 2015, 2; 55-61
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of seismic wave attenuation based on acoustic full waveforms
Autorzy:
Święch, E.
Wandycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/89003.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
attenuation
acoustic full waveforms
quality factor Q
Opis:
The loss of elastic energy to the medium can be quantified by the quality factor Q. Acoustic full waveforms log from Winna Góra1 borehole were used to estimate P-wave quality factor. Data used in this paper were analyzed with usage of GeoWin software. Interpretation of acoustic full waveforms was performed for the one pair of waveforms. The most important part in the interpretation of data is manual picking of P wave arrival, calculation of semblance function, and picking anomalies of P wave on amplitude spectrum. Using data from interpretation of acoustic full waveforms, we calculated quality factor. Based on provided analysis it is concluded that the highest attenuation ( so the lowest Q) is observed in Rotliegend strata.
Źródło:
Mining Science; 2015, 22; 55-63
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal and electrical analysis of automotive ignition system
Autorzy:
Sebok, Milan
Kucera, Matej
Gutten, Miroslav
Korenciak, Daniel
Powiązania:
https://bibliotekanauki.pl/articles/263092.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
thermovision
ignition systems
spark plug
high-voltage waveforms
Opis:
This article describes evaluation principles of individual parts of the ignition system, using conventional diagnostic systems, based on evaluation of current and voltage waveforms. By means of the practical test, diagnostics, measurements and subsequent analysis it was proved that thermovision plays an important role in diagnostics in on-line check automotive equipment. By comparing the non-standard warming behaviour of a part of the electrical system with combination with time highvoltage method, it is possible to diagnose a fault and also check the operating mode of the system. Sample thermogram of the temperature distribution of the ignition coils and analysis of high-voltage ignition curves with faulty spark plugs is given in the part of the paper of nondestructive diagnostics with a difference in temperature. Analysing the fault condition of ignition systems, using the method conventional diagnosis of high-voltage pulse waveforms and also the method of thermovision diagnostics, we can adequately evaluate the functionality of the electronic system and its individual components. In some cases, with one coil ignition systems, we cannot use the conventional method and therefore it is preferable to proceed to the analysis of temperature fields.
Źródło:
Archiwum Motoryzacji; 2019, 83, 1; 113-121
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie transformaty Fouriera oraz transformaty falkowej do analizy przebiegów odkształconych
Fourier Transform and Wavelet Transform used for the analysis of waveforms distortion
Autorzy:
Bartman, Jacek
Sobczyński, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/550657.pdf
Data publikacji:
2017
Wydawca:
Wyższa Szkoła Biznesu i Przedsiębiorczości w Ostrowcu Świętokrzyskim
Tematy:
przebiegi odkształcone
FFT
DWT
widmo
falka
distorted waveforms
spectrum
wavelet
Opis:
Praca poświęcona jest zagadnieniu analizy elektrycznych przebiegów odkształconych. Przedstawiono w niej podstawy analiz częstotliwościowych bazujących na Dyskretnej Transformacie Fouriera (DFT) oraz analiz czasowo-częstotliwściowych realizowanych z wykorzystaniem Dyskretnej Transformaty Falkowej (DWT). W końcowej części pracy pokazano wykorzystanie obu metod do analizy prądu odkształconego pobieranego przez obrabiarkę numeryczną.
The work is devoted to the problem of analysis of electric waveforms distortion. It presents the basis for frequency-based analysis using on Discrete Fourier Transform (DFT) and time-frequency analysis using Discrete Wavelet Transform (DWT).The final part of the paper presents the use of both methods for the analysis of current distortion by a machine CNC.
Źródło:
Acta Scientifica Academiae Ostroviensis. Sectio A, Nauki Humanistyczne, Społeczne i Techniczne; 2017, 10(2)/2017; 124-135
2300-1739
Pojawia się w:
Acta Scientifica Academiae Ostroviensis. Sectio A, Nauki Humanistyczne, Społeczne i Techniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CPC-based currents’ description in three-phase four-wire systems with asymmetrical and nonsinusoidal waveforms
Autorzy:
Sołjan, Z.
Hołdyński, G.
Zajkowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/200460.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Currents’ Physical Components (CPC)
power theory
asymmetric voltage
nonsinusoidal waveforms
Opis:
This article aims to explain the capability of describing three-phase systems powered from the source with asymmetrical nonsinusoidal voltage waveforms. Indicating the physical components of the currents associated closely with specific physical phenomena facilitates separating the unbalanced components from the active and reactive ones. All those currents, excluding the active current and the scattered current, contribute to the existing unbalanced and reactive power. This article presents the decomposition of currents based on the Currents’ Physical Components Theory. When decomposing currents, it is assumed that the load is linear and unchanging in time, and the voltage supply is asymmetrical and nonsinusoidal.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2020, 68, 5; 1127-1134
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An investigation into the impact of electrical pulse character on surface texture in the EDM and WEDM process
Ocena wpływu charakteru impulsów elektrycznych w procesie EDM i WEDM na stan struktury geometrycznej powierzchni
Autorzy:
Oniszczuk, D.
Świercz, R.
Powiązania:
https://bibliotekanauki.pl/articles/176027.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wycinanie elektroerozyjne
WEDM
drążenie elektroerozyjne
EDM
charakterystyki natężenia prądu
charakterystyki napięcia prądu
struktura powierzchni
wire electrical discharge machining
electrical discharge machining
current waveforms
voltage waveforms
surface structure
Opis:
The article discusses the results of experimental studies on the influence of the character of the pulse current and voltage on surface texture after the Wire Electrical Discharge Machining (WEDM) and the electrical Discharge Machining (EDM). The measurement circuit has been developed to determine the real current-voltage characteristics. Based on the survey developed mathematical models describing the effects of selected parameters of pulse electrical on the surface texture.
W artykule przedstawiono analizę wyników badań doświadczalnych wpływu charakteru impulsów natężenia i napięcia prądu elektrycznego na strukturę geometryczną powierzchni (SGP) po obróbce wycinaniem (WEDM) i drążeniem elektroerozyjnym (EDM). Opracowano i zbudowano stanowiska pomiarowe do wyznaczenia rzeczywistych charakterystyk natężenia i napięcia prądu. Na podstawie wyników przeprowadzonych badań opracowano modele matematyczne opisujące wpływ wybranych parametrów impulsów elektrycznych na strukturę geometryczną powierzchni.
Źródło:
Advances in Manufacturing Science and Technology; 2012, 36, 3; 43-53
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dobór metody filtrowania przebiegu prędkości pojazdu
Selection of the vehicle speed waveforms filtering method
Autorzy:
Wiśniowski, P.
Ślęzak, M.
Niewczas, A.
Szczepański, T.
Powiązania:
https://bibliotekanauki.pl/articles/310049.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
filtracja
metoda filtracji
przebiegi prędkości
filtering method
filtration method
speed waveforms
Opis:
Przebieg prędkości pojazdu stanowi przykład funkcji stosunkowo trudnej do filtrowania. Metoda filtrująca musi bowiem cechować się nie tylko określonymi właściwościami widma częstotliwościowego. Musi także wykazywać inne właściwości, które zostaną bliżej omówione w niniejszym artykule. W przypadku złego doboru algorytmu filtracji często okazuje się, że przetworzony przebieg zawiera zniekształcenia sygnału, które uniemożliwiają jego poprawną interpretację fizyczną. W artykule porównano ze sobą 2 popularne metody filtracji wraz z ich podstawowymi modyfikacjami, omówiono ich wady i zalety, a także przedstawiono ich praktyczne zastosowanie dla zarejestrowanych przebiegów prędkości pojazdu. Oceniono również, które rozwiązanie może być częściej przydatne podczas opracowywania wyników badań stanowiących przebieg prędkości pojazdu.
The vehicle speed waveforms is an example of the function that is relatively difficult to filter. In this case the filtering method must be characterized not only by specific properties of the frequency spectrum. It must also meet other conditions that will be discussed in more detail in this article. In the case of wrong selection of filtering algorithm it often turns out that the processed waveform contains signal distortions witch make it impossible to correct physical interpretation of given signal. The article compares two popular filtering methods with their basic modifications, discusses their advantages and disadvantages and shows their practical application for registered waveforms vehicle speed. It aIso evaluates which solution can be more useful during the development of research results that covering the course of vehicle speed.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 9; 24-29
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy balance and quality in electric network powering IT objects
Autorzy:
Bednarek, K.
Kasprzyk, L.
Powiązania:
https://bibliotekanauki.pl/articles/97479.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
quality of energy
disturbance waveforms
higher harmonics
energy balance
reactive power compensation
Opis:
The paper deals with elements of issues regarding the impact of electromagnetic disturbances and electric energy management. The energy balance and tests of distortions of voltage and current waveforms in the power supply system of an IT facility such as a computer laboratory were carried out. The measurements covered current and voltage values, active power, reactive power and apparent power, power factor and THD (Total Harmonics Distortion) factor for voltage and current, waveforms and content of current and voltage harmonics in the facility under consideration. On top of this, effects of the UPS EVER POWERLINE power supply, provided with the reactive power compensation function (without connecting reactive compensation components) were tested in reference to the reactive power consumption by devices connected in parallel with the UPS to the electric network in the object. The analyses were carried out in terms of introducing rationalization of energy management and eliminating the impact of disturbances in systems covering power supply and energy receivers, that is, achieving technical (reliability of devices) and economic benefits (reduction in operational costs resulting from occurring power losses and in charges collected for consumption of electricity) in using large powered objects.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 113-126
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odtwarzanie przebiegów ciśnień impulsowych
The reconstruction of waveforms of impulsive pressure
Autorzy:
Detka, M.
Kaczmarek, Z.
Powiązania:
https://bibliotekanauki.pl/articles/156625.pdf
Data publikacji:
2006
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ciśnienia impulsowe
odtwarzanie przebiegów ciśnień impulsowych
impulsive pressure
reconstruction of waveforms of impulsive presure
Opis:
W artykule przedstawiono metodę odtwarzania przebiegów ciśnień impulsowych, której istota polega na dekonwolucji w dziedzinie częstotliwości i wykorzystaniu transmitancji widmowej elastycznego pręta, działającego jako przetwornik mechaniczny. Transmitancję widmową pręta wyznaczono w postaci zależności analitycznej na podstawie pomiarów fal odkształceń w dwóch przekrojach pręta. Regularyzację odtwarzania realizuje się przez ograniczenie pasma filtru inwersyjnego. Metodę zastosowano do odtwarzania przebiegów ciśnień impulsowych wywołanych wyładowaniem elektrycznym w wodzie.
This paper presents a method for reconstruction of impulsive pressure waveforms, whose essence consists in deconvolution in the frequency domain and the use of the spectral transmittance of the elastic bar acting as a mechanical transducer. The spectral transmittance was determined as an analytical relation using measurements of strain waves in two cross-section of the bar. A regularization of the deconvolution is obtained by means of limiting the frequency band of the inversion filter. The method was used to reconstruct impulsive pressure waveforms generated by electric discharges in water.
Źródło:
Pomiary Automatyka Kontrola; 2006, R. 52, nr 4, 4; 10-13
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostics of modern diesel engines on the example of Fiat 1.3 JTD MultiJet engine
Autorzy:
Prajwowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/245043.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
engine diagnostics
sensor system
actuator system
oscilloscope signal waveforms
diagnostyka silnika
system czujników
system siłownika
Opis:
Initially, electronic components replaced the mechanical ones to make various systems more reliable. Mechanical control systems, due to the wear of movable parts and imprecise adjustment, were affected by large errors, which are not shown by electronic circuits operating according to constant set-points. Then, a sharp increase in electronisation was associated with the tightening of exhaust gas emission regulations. Progress in some cases is forced by environmental protection, in other ones by market competition. Modern motor vehicles, slow moving vehicles, military vehicles, etc., are the technical systems being constructed using the latest developments in many fields of science, first of all in mechanics and machine engineering, electrical engineering, electronics, information technology, and chemistry. The rapid development of electronics has led to an increase in the number of electronic components in motor vehicles in all systems, starting with an engine, which has been modified first, to comfort and infotainment systems. The paper presents example measurements of sensors and actuators of an engine with Common Rail fuel supply system on the example of Fiat 1.3 JTD MultiJet engine. The measurements were made using various diagnostic instruments, such as a diagnostic tester, a multimeter or an oscilloscope. Sometimes, the reading of error codes with a diagnostic tester itself is not enough and it is necessary to check the signal waveform with an oscilloscope, which has been presented in this paper.
Źródło:
Journal of KONES; 2016, 23, 3; 403-409
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zróżnicowanie systemów on-line monitorowania stanu technicznego silników elektrycznych
The diversity of on-line condition monitoring systems of electric motors
Autorzy:
Duyar, A.
Nowicki, R.
Eker, O. F.
Powiązania:
https://bibliotekanauki.pl/articles/1367443.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
stan techniczny
zabezpieczenia elektryczne silników
przebiegi czasowe
utrzymanie ruchu
technical condition
motor protection relays
waveforms
maintenance
Opis:
This paper describes a new maintenance tool, which is built over Industrial Ethernet. As a source of data are used waveforms of electrical signals available from professional motor protection systems. The system is able to create patterns describing normal and abnormal technical condition of a production asset or provided production process, and estimate reasons of abnormalities. The system was installed in a refinery. Some examples of system discovering are presented.
W artykule zaprezentowano system wspomagania działania służb Utrzymania Ruchu (UR) wykorzystujący systemy zabezpieczenia pracy silników elektrycznych, które umożliwiają gromadzenie dynamicznych przebiegów czasowych wielkości elektrycznych. System ten zbudowany na bazie Internetu przemysłowego, umożliwia generowanie wzorca symptomu stanu technicznego (ST) odpowiadającego stanowi normalnemu, wzorca granicznego, a także na bazie zaszytej inteligencji wspomaga rozpoznanie przyczyn pojawienia się stanu nienormalnego. Omówiono testową instalację systemu przeprowadzoną w rafinerii oraz zaprezentowano wybrane przykłady oceny.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2016, 3, 111; 87-92
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wirtualne przyrządy pomiarowe oraz systemy akwizycji danych przeznaczone do badań maszyn elektrycznych
Virtual instruments and data acquisition systems for testing the electrical machines
Autorzy:
Barański, M.
Decner, A.
Powiązania:
https://bibliotekanauki.pl/articles/1367965.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
maszyny elektryczne
przyrządy wirtualne
przebiegi odkształcone
przetwarzanie A/D
electrical machines
virtual instruments
distorted waveforms
A/D conversion
Opis:
Virtual instruments are presented in the paper. Basic features and capabilities of measuring equipment are described. Measurement system with one A/D converter for all channels is compared with measurement system which offers simultaneous sampling of all channels. The definitions of calculating the value of the signals are provided. The virtual analyzer of distorted waveforms, vibration analyzer and performed measurements are presented.
W artykule przedstawiono i opisano podstawowe właściwości i możliwości wirtualnej aparatury pomiarowej. Porównano system pomiarowy wyposażony w jeden przetwornik A/D obsługujący kilka wejść analogowych z systemem oferującym równoczesne próbkowanie wszystkich kanałów pomiarowych. Przytoczono definicje obliczania wartości sygnałów. Przedstawiono wirtualny analizator przebiegów odkształconych oraz analizator drgań i wykonane rejestracje.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 2, 106; 69-72
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza czasowo-częstotliwościowa akustycznych obrazów falowych za pomocą transformaty falkowej
Time-frequency analysis of acoustic full waveforms using wavelet transform
Autorzy:
Wawrzyniak, K.
Powiązania:
https://bibliotekanauki.pl/articles/183753.pdf
Data publikacji:
2005
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
analiza czasowo-częstotliwościowa
transformata falkowa
fale sprężyste
akustyczne obrazy falowe
time-frequency analysis
wavelet transform
elastic waves
acoustic full waveforms
Opis:
Interpretacja akustycznych obrazów falowych opiera się na identyfikacji fal sprężystych rejestrowanych w otworze. Problem z określeniem czasów przyjścia i trwania pakietów falowych może być rozwiązany dzięki zastosowaniu analiz czasowo-częstotliwościowych, takich jak transformata falkowa. Do rozdzielenia pola falowego rejestrowanego na akustycznych obrazach falowych zastosowano dyskretną i ciągłą transformatę falkową. Prowadzone badania dowiodły, że z uwagi na nieduże zróżnicowanie częstotliwości w pakietach fal P i S dyskretna transformata falkowa nie nadaje się do rozwiązania postawionego zadania. Jest za to bardzo dobrym narzędziem do odfiltrowania szumów z rejestrowanych sygnałów. Wykorzystanie ciągłej transformaty falkowej, która charakteryzuje się większą rozdzielczością, daje szansę na wydzielenie fal z akustycznych obrazów falowych
Interpretation of acoustic full waveforms is based on identification of elastic waves recorded in boreholes. Determination of arrival time and duration of wave packets can be solved using time-frequency analyses such a wavelet transform. Discrete and continuous wavelet transform were applied to decomposition of wave field. Research showed that discrete wavelet transform is not a proper tool to solving the problem. However, it allows denoising signals. Research on continuous wavelet transform, which has better resolution, are carried out and gives a chance to decompose wave field into separate waves
Źródło:
Geologia / Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie; 2005, 31, 3/4; 309-335
0138-0974
Pojawia się w:
Geologia / Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-method approach to velocity determination from acoustic well logging
Autorzy:
Jarzyna, J.
Bała, M.
Krakowska, P.
Powiązania:
https://bibliotekanauki.pl/articles/191745.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
P-wave slowness
S-wave slowness
acoustic full waveforms
FalaFWS application
Estymacja program
acoustic wave frequency
seismic wave frequency
Opis:
Three different methods of building detailed velocity models for seismic interpretation are explained and discussed in terms of their advantages and limitations. All of the proposed methods are based on the analysis of acoustic well logs. An application of acoustic full waveform measurements, as well as the FalaFWS and Estymacja software, is presented as a tool for determining P-wave and S-wave slowness (transit time interval, velocity reciprocal). Well log data from several wells, located near the special research seismic transect in the Polish Lowland, were processed using the methods proposed. The results of data analysis are presented for a depth section of up to 3623 m for the lithostratigraphic units, recorded from the Środa Wielkopolska 5 (SW5) well. The results of P-wave and S-wave slowness filtering, used to upscale well log data to a seismic scale of resolution, are shown for the entire geological profile of the SW5 well.
Źródło:
Annales Societatis Geologorum Poloniae; 2013, 83, 2; 133--147
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of the energy parameters of the frequency converters
Pomiar parametrów energii przetworników częstotliwości
Autorzy:
Kus, V.
Skala, B.
Powiązania:
https://bibliotekanauki.pl/articles/158870.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
częstotliwość
prąd
analiza harmoniczna
energy parameters
frequency converters voltage
current
waveforms
measuring devices
FFT analysis
voltage inverter
harmonic analysis
power factor
frequency
Opis:
In measuring the energy parameters of frequency converters, due to the nonlinear voltage and current waveforms, it is not possible to use standard measuring devices. One possibility is to use FFT analysis followed by a calculation of the individual powers. The paper presents the procedures, measurements and advantages of the measurements, which were made on the frequency converter with the voltage inverter at the industrial plant. Measurements were taken out in accordance with EN-6100-4-7. The paper presents not only the results of harmonic analysis of the input and output voltages and currents, but also the performance analysis and power factors. Interesting are also the waveforms of these variables and the changes in the out-put frequency, which was controlled with an industrial computer.
W pomiarach energii przetworników częstotliwości, w wyniku nieliniowego przebiegu napięcia i prądu, nie jest możliwe użycie standardowych przyrządów pomiarowych. Jedyną możliwością jest wykorzystanie analizy FFT i następnie obliczenie poszczególnych mocy. Artykuł przedstawia procedury, pomiary i zalety pomiarów, które były wykonane na przetwornikach częstotliwości z przekształtnikiem napięcia w zakładzie przemysłowym. Pomiary były pobierane zgodnie z EN-6100-4-7. Artykuł przedstawia nie tylko wyniki analizy harmonicznej napięć i prądów wejściowych i wyjściowych, ale także analizy działania i współczynników mocy. Interesujące były także przebiegi tych zmiennych i zmiany częstotliwości wyjściowej, która była sterowana za pomocą komputera przemysłowego.
Źródło:
Prace Instytutu Elektrotechniki; 2011, 253; 102-113
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie komputerowe układów prostowniczych jedno- i trójfazowych z obciążeniem RL
Computational modelling one and three-phase rectifier with RL load
Autorzy:
KWATER, Tadeusz
TWARÓG, Bogusław
PĘKALA, Robert
BARTNIK, Karol
Powiązania:
https://bibliotekanauki.pl/articles/455152.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Rzeszowski
Tematy:
modelowanie komputerowe
równania różniczkowe zwyczajne
schematy połączeń obwodów elektrycznych
dioda
tyrystor
przebiegi symulacyjne
computational modelling
ordinary differential equations
scheme electrical circuits
diode
thyristor
simulation waveforms
Opis:
W artykule przedstawiono problematykę dotyczącą modelowania komputerowego układów prostowniczych jedno- i trójfazowych z obciążeniem typu RL. Podano założenia upraszczające oraz schematy połączeń elektrycznych i odpowiadające im równania różniczkowe zwyczajne. Zamieszczono rezultaty eksperymentów numerycznych potwierdzających ich zgodność z przebiegami rzeczywistymi
This paper presents issues concerning computational modelling systems one and three-phase rectifier with a load RL. Given the simplifying assumptions and the wiring diagrams and the corresponding ordinary differential equations. Contains the results of numerical experiments confirming their compliance with the actual waveforms
Źródło:
Edukacja-Technika-Informatyka; 2013, 4, 2; 351-357
2080-9069
Pojawia się w:
Edukacja-Technika-Informatyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody wyznaczania składowej dyspersyjnej w analizie propagacji szerokopasmowych impulsów elektromagnetycznych
Estimation of the dispersive component in numerical analysis of broadband electromagnetic pulses
Autorzy:
Butryło, B.
Powiązania:
https://bibliotekanauki.pl/articles/157255.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
materiały dyspersyjne
szerokopasmowa metoda elementów skończonych
rekurencyjne algorytmy splotowe
szerokopasmowe sygnały elektromagnetyczne
dispersive materials
broadband finite element method
recursive convolution
ultra broadband electromagnetic waveforms
Opis:
W artykule przedstawiono metodę analizy pól elektromagnetycznych w układach zawierających materiały dyspersyjne. Rozpatrzono wpływ zmiany rzędu wielomianu aproksymującego zmiany pola oraz wielkości kroku całkowania numerycznego na precyzję i stabilność szerokopasmowego algorytmu metody elementów skończonych.
The paper deals with broadband formulation of the finite element time domain (FETD) method. The presented version of the FETD algorithm is based on the second order wave equation. The dispersive properties of materials are taken into account by step-by-step, recursive evaluation of the convolution integral. The resonance absorption of the analyzed materials is described by a linear combination of the complex Lorentz kernels shifted in the frequency domain. The presented, unified formulation of the recursive convolution scheme is based on the local, polynomial approximation of the electromagnetic waveform. A validation example for the algorithm is provided for a generic semi-cylinder component made of nondispersive material. It is coated by a thin layer dispersive, narrowband dielectric. The accuracy and computational cost of the presented multi-step algorithm are examined. The transient state simulation results depend on the approximation scheme order and the assumed time step size.
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 2, 2; 119-121
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie porowatości ogólnej i parametrów szkieletowych utworów węglanowych na podstawie pomiarów prędkości fal sprężystych i gęstości
Total porosity and matrix parameters of carbonate rocks based on the elastic wave velocity and density measurements
Autorzy:
Jarzyna, J.
Puskarczyk, E.
Ogórek, E.
Motyka, J.
Powiązania:
https://bibliotekanauki.pl/articles/2061613.pdf
Data publikacji:
2018
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
ULT-100 P&S Ultrasonic Velocity Measurement
fale sprężyste
obrazy falowe
parametry petrofizyczne
gęstość objętościowa
wapienie jurajskie
Olkusz
elastic waves
acoustic waveforms
petrophysical parameters
bulk density
Jurassic limestones
Opis:
Badania wykonano w celu wykazania zależności między prędkościami fal sprężystych uzyskanymi w wyniku pomiarów laboratoryjnych a parametrami otrzymanymi w badaniach hydrogeologicznych (porowatością i gęstością objętościową). Pomiary przeprowadzono na 73 próbkach skalnych, pochodzących w większości z poziomów wodonośnych z rejonu Olkusza. Informacja o prędkościach fal sprężystych w połączeniu z parametrami zbiornikowymi (porowatością, współczynnikiem filtracji i gęstością) dostarczyła dodatkowych informacji o badanych skałach. Zestawienie prędkości fali podłużnej P oraz gęstości objętościowej z porowatością otwartą, obliczoną w badaniach hydrogeologicznych, dało informację o zakresie zmian prędkości oraz gęstości szkieletowej w badanych skałach, które następnie wprowadzono do wzorów na obliczenie porowatości ogólnej badanych próbek. Na podstawie prędkości fal sprężystych, zmierzonych na próbkach wyciętych z rdzeni w dwóch prostopadłych kierunkach, wykonano także analizę anizotropii, co pozwoliło zidentyfikować szczeliny w skale. Analiza wyników hydrogeologicznych i petrofizycznych pokazała, że łącząc ze sobą różnorodne parametry można uzyskać dodatkowe informacje o właściwościach zbiornikowych poziomów wodonośnych.
The purpose of the research was to find relationship between elastic waves velocities obtained from lab measurements and parameters from hydrogeological research. Measurements were conducted on 73 rock samples originating mostly from Jurassic limestone of the Olkusz area. Additional information about the rock samples was obtained when the elastic wave velocities were compared with reservoir parameters such as porosity, permeability and density. Plots of elastic waves velocities vs. porosity and bulk density vs. porosity gave information about the range of P wave velocities from the boundary velocity to the values when porosity is equal to zero. Matrix velocity and density values were introduced into the formulas used to calculate porosity. Anisotropy analysis was made on the basis of elastic wave velocities measured on cores cut in two perpendicular directions. This allowed for identification of fractures in rocks. Results showed that by comparing various petrophysical parameters it was possible to get better information about reservoir properties of aquifers.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2018, 473; 13--25
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nonlinear magnetic circuit – self inductance definitions, passivity and waveforms distortion
Autorzy:
Spałek, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/2173679.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
generalized magnetizing curve
nonlinear magnetic circuit
self-inductance definitions
passivity
Fourier harmonics of distorted waveforms
krzywa magnesowania uogólniona
obwód magnetyczny nieliniowy
definicja samoindukcyjności
pasywność
szereg Fouriera
zniekształcenie harmoniczne
Opis:
The generalized magnetizing curve series for the nonlinear magnetic circuit is proposed. Subsequently, three definitions of self-inductance for the nonlinear magnetic circuit are compared. The passivity of the magnetic circuit is reconsidered. Three theorems that describe features of Fourier harmonics of distorted waveforms have been proved.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2022, 70, 3; art. no. e141003
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estymacja parametrów modelu generatora synchronicznego na podstawie zaszumionych przebiegów dynamicznych przy wykorzystaniu zakłóceń pseudolosowych
Estimation of the Synchronous Generator Model Parameters Based on Noisy Dynamic Waveforms Obtained for Pseudorandom Disturbances
Autorzy:
Berhausen, S.
Paszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/1367619.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
estymacja parametrów
generator synchroniczny w systemie elektroenergetycznym
sygnały pseudolosowe (PRBS)
filtracja przebiegów
filtr o zerowym przesunięciu fazowym
parameter estimation
synchronous generator in power system
pseudorandom signals (PRBS)
filtering waveforms
zero phase digital filters
Opis:
In the paper, there are presented the results of parameter estimation of the mathematical model of a synchronous generator operating in a single-machine power system. Noisy dynamic waveforms caused by introducing a disturbance in the form of a pseudorandom signal to the generator voltage regulator system were the basis of estimation. It was assumed that the generator load was close to the rated one. Finite and infinite impulse response zero-phase digital filters were used for filtering the waveforms. The least squares method was used for parameter estimation, and the gradient method was applied to minimization of the mean square error.
W artykule przedstawiono wyniki estymacji parametrów modelu matematycznego generatora synchronicznego pracującego w jednomaszynowym systemie elektroenergetycznym. Podstawą estymacji są zaszumione przebiegi dynamiczne wywołane wprowadzeniem do układu regulacji napięcia generatora zakłócenia w postaci sygnału pseudolosowego. Założono, że generator pracuje blisko znamionowego obciążenia. Do filtracji przebiegów wykorzystano filtry cyfrowe o zerowym przesunięciu fazowym o skończonej i nieskończonej odpowiedzi impulsowej. Do estymacji parametrów wykorzystano metodę najmniejszych kwadratów, a do minimalizacji błędu średniokwadratowego metodę gradientową.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 191-196
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of complex sliding window discrete Fourier transformation in current and voltage distortion analysis in three-phase circuits
Wykorzystanie dyskretnej transformaty Fouriera zmiennej zespolonej ze ślizgającym oknem do analizy odkształceń prądów i napięć w układach trójfazowych
Autorzy:
Grugel, P.
Powiązania:
https://bibliotekanauki.pl/articles/194124.pdf
Data publikacji:
2011
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
dyskretna Transformata Fouriera zmiennej zespolonej ze ślizgającym oknem
selektywna filtracja aktywna
analiza widmowa wektora wodzącego
odkształcone przebiegi prądu i napięcia
Complex Sliding Window Discrete Fourier Transformation
selective active power filtration
position vector spectrum analysis
voltage and current distorted waveforms
Opis:
The article concerns the aspects of vector analysis of current and voltage distorted waveforms in three-phase circuits from the point of higher harmonic content. Apart from that, the work contains the results of the analysis of current's vector harmonic based on the complex SDFT. These results have been obtained after having conducted a simulation. The article also tackles the proposal of accelerating the SDFT algorithm in order to facilitate its implementation in real-time systems.
Artykuł przedstawia aspekty wektorowej analizy odkształconych przebiegów prądów i napięć w układach trójfazowych pod kątem zawartości wyższych harmonicznych. Praca zawiera również wyniki analizy harmonicznej wektora prądu opartej o transformatę Fouriera zmiennej zespolonej ze ślizgającym oknem (complex SDFT) uzyskane na drodze symulacji oraz propozycję przyspieszenia algorytmu SDFT w celu ułatwienia jego implementacji w układach pracujących w czasie rzeczywistym.
Źródło:
Zeszyty Naukowe. Elektrotechnika / Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy; 2011, 16; 27-41
0209-0570
Pojawia się w:
Zeszyty Naukowe. Elektrotechnika / Uniwersytet Technologiczno-Przyrodniczy w Bydgoszczy
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-21 z 21

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies