Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "waste slag" wg kryterium: Temat


Tytuł:
Preparation and environmental toxicity of non-sintered ceramsite using coal gasification coarse slag
Autorzy:
Zhao, Shenwei
Yao, Linying
He, Haibin
Zou, Yiping
Hu, Lei
Zhai, Yujia
Yu, Yajing
Jia, Jianli
Powiązania:
https://bibliotekanauki.pl/articles/205064.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pollution
coal gasification coarse slag
waste control
non-sintered ceramsite
heavy metal fixation
Opis:
In this study, non-sintered ceramsite was prepared using coal gasification coarse slag obtained from a methanol plant. The basic performance and heavy metal leaching toxicity were analyzed. The results showed that seven out of nine non-sintered ceramsite groups were in accordance with the national standard of compressive strength (5 MPa), while only three groups met the national standard of water absorption index of less than 22%. The heavy metal concentrations in these three groups were found to be lower than that specified in National Class IV of surface water environment standards. The concentration of Cr was found to be 16.45 μg/L, which represents only 1% of the IV standard. The optimum mixing ratio, which showed high compressive strength (6.76 MPa) and low water absorption (20.12%), was found to be 73% coal gasification coarse slag, 15% cement, and 12% quartz sand. The characterization using Fourier transform infrared spectroscopy showed that the formation of gelatin in ceramsite enhances the performance of the ceramsite base and increases the immobilization of heavy metal. The study proved that the preparation of non-sintered ceramsite using coal gasification coarse slag reduces its environmental risk and achieves efficient utilization of the slag. Therefore, it can be concluded that it is a feasible and environmental friendly method for the disposal of coal slag.
Źródło:
Archives of Environmental Protection; 2019, 45, 2; 84-90
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Slag waste of metallurgical production. Environmental and economic justification of their use in industry in Ukraine
Odpady żużli w produkcji hutniczej. Środowiskowe i ekonomiczne uzasadnienie ich wykorzystania w przemyśle Ukrainy
Autorzy:
Zakharovich-Drachuk, Yuri
Stalinskaya, Elena
Snitko, Elizaveta
Zavgorodnyaya, Evgeniya
Jaworska, Monika
Savyuk, Larisa
Cheylyakh, Dmitry
Powiązania:
https://bibliotekanauki.pl/articles/1840810.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
slag waste
industrial
metallurgical production
ecological expenditure
odpady żużlowe
przemysł
produkcja metalurgiczna
wydatki ekologiczne
Opis:
The relevance of the study is due to the need to identify the problems, features and consequen ces of strategic transformations in the metallurgical industry of Ukraine in the context of reviewing the circular process of organization of the economy, where the blast furnace, open-hearth and rolling production waste are of a high potential. The reuse of metallurgical waste has a number of economic advantages in terms of the chemical composition of the product life cycle. Blast furnace slag is suitable as a raw material in cement production and can be used as fillers in the construc tion of roads, hydraulic and environmental facilities, during reclamation works, etc. Agriculture actively uses slag as a fertilizer that contains potassium, magnesium, phosphorus, magnesium, bo ron – as an additive that reduces soil acidity. Currently, all slag can be processed into fertilizers or building materials. The economic effect of the use of slag in construction is accounted for in the relatively low cost of products, improvement of the quality and durability of the structures. The main positive consequences of smartization of the metallurgical industry are increase of its resource efficiency and environmental friendliness, negative – the low level of blast furnace slag use in various sectors of the economy compared to the experience of developed countries, an insuf ficiently developed legal framework. The mechanism of state management of the use of secondary raw materials, especially metallurgical origin, in conditions of shortage of energy resources and the intensive use of non-renewable natural resources remains an important scientific problem and requires further research.
Powodem realizacji prezentowanych badań jest konieczność zidentyfikowania problemów i ich cech wynikających z przemian strategicznych w przemyśle metalurgicznym Ukrainy w kontekście cyklicznego przeglądu procesu organizacji gospodarki, w którym odpady wielkopiecowe, paleniskowe i walcownicze mają duże znaczenie. Ponowne wykorzystanie odpadów metalurgicznych ma wiele zalet ekonomicznych ze względu na cyklu życia produktu. Żużel wielkopiecowy nadaje się jako surowiec do produkcji cementu i może być stosowany jako wypełniacz przy budowie dróg, obiektów hydrotechnicznych, środowiskowych, podczas prac rekultywacyjnych itp. Rolnictwo wykorzystuje żużel jako nawóz zawierający potas, magnez, fosfor, magnez, bor – jako dodatek zmniejszający kwasowość gleby. Obecnie cały żużel można przerobić na nawozy lub materiały budowlane. Efekt ekonomiczny stosowania żużla w budownictwie przekłada się na relatywnie niski koszt wyrobów, poprawę jakości i trwałości konstrukcji. Głównymi pozytywnymi efektami takiego inteligentnego wykorzystania odpadów z przemysłu metalurgicznego są wzrost efektywności wykorzystania zasobów i poprawa jego oddziaływania na środowisko. Cechy negatywne to niski poziom wykorzystania żużli wielkopiecowych w różnych sektorach gospodarki w porównaniu z doświadczeniami krajów rozwiniętych i niedostatecznie opracowane ramy prawne. Ważnym problemem naukowym i wymagającym dalszych badań pozostaje mechanizm państwowego zarządzania wykorzystaniem surowców wtórnych, zwłaszcza pochodzenia metalurgicznego, w warunkach niedoboru surowców energetycznych i intensywnego wykorzystania nieodnawialnych zasobów naturalnych.
Źródło:
Polityka Energetyczna; 2021, 24, 1; 169-182
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Produkt spalania komunalnych osadów ściekowych jako grunt antropogeniczny
Product of Municipal Sewage Sludge Incineration as an Anthropogenic Soil
Autorzy:
Zabielska-Adamska, K.
Powiązania:
https://bibliotekanauki.pl/articles/1818584.pdf
Data publikacji:
2015
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
żużel ze spalania osadów ściekowych
popiół ze spalania osadów ściekowych
wykorzystanie odpadów
właściwości geotechniczne odpadów
roboty ziemne
slag from combustion of sewage sludge
ash from combustion of sewage sludge
waste utilization
waste geotechnical properties
earthworks
Opis:
National Waste Management Plan 2014 for Poland assumes increasing the amount of municipal sewage sludge converted by thermal methods, which requires an increase in the mass of sludge thermally pretreated in cement plants, power boilers and incineration plants of sewage sludge. Before June 2010 only three municipal sewage sludge incinerators were existed in Poland, and sludge incineration accounted for only 2% of the total waste. Incineration plant of municipal sewage sludge in Lomza was launched in December 2007 as the second Polish incinerator. It uses the combustion of sewage sludge in the furnace with mechanical moving grate. A mixture of slag and ash is taken off in a moistened state and led to a landfill. The paper presents the geotechnical properties of the thermally converted municipal sewage sludge in incineration plant in Lomza to show that it can be considered as a substitute for natural soils. The research programme includes properties necessary to determine the suitability of the waste for road embankments according to Polish Standard PN-S-02205:1998. The comparison of the obtained test results and the code requirements designed for coal fly ash and bottom ash mix indicates that the product of sewage sludge combustion meets all code requirements for material suitable for road embankment. Due to the 30% reduction of CBR values after waste soaking causing relatively low CBR values of soaked waste, the product of sewage sludge incineration should be built into places isolated from ground water and precipitation. That is also indicated by the possibility of leaching of heavy metals from the waste because their content is much higher than in uncontaminated soils. For earthworks should be used guidelines applied for coal fly ash and bottom ash mix embedded in road embankments. Tested product of sewage sludge combustion in the furnace with mechanical grate are much more preferred material for earthworks than fly ash generated during incineration in a fluidised bed due to the particle size. In view of lack of data in the literature concerning the geotechnical properties of the sewage sludge incineration products, further laboratory and field studies should be conduct to confirm the usefulness of waste for earthworks.
Źródło:
Rocznik Ochrona Środowiska; 2015, Tom 17, cz. 2; 1286-1305
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uwarunkowania wykorzystania odpadów i mieszaniny odpadów do technicznej rekultywacji terenu
Conditions of waste and waste mixture utilization in technical land reclamation
Autorzy:
Viestova, Z.
Hlavata, M.
Wilkosz, A.
Powiązania:
https://bibliotekanauki.pl/articles/318137.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
rekultywacja terenu
odpady
stabilizator
popiół lotny
żużel
land reclamation
waste
stabilizate
fly ash
slag
Opis:
Trendy rekultywacji i rewitalizacji terenu oraz określenie kierunku rozwoju zmierzają w kierunku ustalenia bardziej realistycznych celów i metod rekultywacji. Podstawą ma być rzeczywista ocena lokalnego zagrożenia oraz oszacowanie barier rekultywacji, jak również określanie ograniczeń prawnych. Każda miejscowość charakteryzuje się specyfiką zarówno pod względem zanieczyszczeń jak i lokalizacji i wymaga odpowiedniego trybu postępowania w procesie rekultywacji.
All trends in the remedial work and land reclamation determine the direction of development in the near future and have contributed to the current efforts to set more realistic targets for land reclamation, i.e. on the basis of real local risk evaluation and taking into account the objectives of the future improved area or its legislative restrictions. Every such locality is specific both in terms of its pollution as well as placement in the region and requires different improvement measures.
Źródło:
Inżynieria Mineralna; 2011, R. 12, nr 1, 1; 51-60
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Use of Phosphorus-Containing Waste and Algae to Produce Biofertilizer for Tomatoes
Autorzy:
Tleukeyeva, Assel
Alibayev, Nuradin
Issayeva, Akmaral
Mambetova, Lyazzat
Sattarova, Aygul
Issayev, Yerzhan
Powiązania:
https://bibliotekanauki.pl/articles/2027806.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
phosphorus-containing waste
chlorella
biofertilizer
Solanum lycopersicum
phosphorus slag
phosphorus sludge
Opis:
The current state of phosphorus-containing waste and the methods of its disposal remain relevant. The storage of phosphorus-containing waste sludge is carried out in sludge collectors, which occupy large areas. With the disposal of slags and sludge, as well as the elimination of sludge collectors, the harmful effect of waste on the soil will cease, and the possibility of using these areas for economic land use will appear. Many studies show the movement of phosphorus in soil and water, thus proving the difficulty of disposing of this waste. Of course, phosphorus slags and sludge are used in small quantities in the production of building materials, but this does not solve all the problems. In the south of Kazakhstan, there are warehouses for the waste from the production of phosphorus-containing fertilizers, which also require disposal. One of the ways of modern utilization of these wastes is their use in fertilizers for agriculture. However, since the phosphorus-containing waste has a high content of phosphorus, compared to nitrogen and potassium, this ratio can be changed with the addition of chlorella biomass. The purpose of the conducted study was to investigate the possibility of using a complex of phosphorus waste and algae, that is, the cultivation of chlorella at various concentrations of phosphorus-containing waste for further use of the suspension in watering the test plant. In the form of a test plant, tomato seeds were chosen, the cultivation of which in agriculture is economically profitable. When cultivated in closed ground, tomatoes lose their taste, which can be restored with the use of organic fertilizers. This article shows the results of the influence of various concentrations of phosphorus waste and green microalgae on the growth and development of Solanum lycopersicum.
Źródło:
Journal of Ecological Engineering; 2022, 23, 2; 48-52
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odzysk energii odpadowej z żużla kotła ciepłowniczego - przymiarka techniczna
Autorzy:
Tańczuk, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/985855.pdf
Data publikacji:
2018
Wydawca:
Nowa Energia
Tematy:
kocioł ciepłowniczy
spalanie odpadów komunalnych
odzysk energii
żużel
popiół
heating boiler
municipal waste incineration
energy recovery
slag
ash
Źródło:
Nowa Energia; 2018, 5/6; 39-44
1899-0886
Pojawia się w:
Nowa Energia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physicochemical and geotechnical properties of an ash-slag mixture deposited on a landfill in terms of its use in engineering
Autorzy:
Szwalec, A.
Gruchot, A.
Mundała, P.
Zawisza, E
Kędzior, R.
Powiązania:
https://bibliotekanauki.pl/articles/184360.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
ash-slag mixture
reuse of coal combustion waste
embankment
shear strength reduction method
Opis:
Coal combustion ash-slag mixtures have been deposited in landfills in Poland for decades. At the same time, there is a shortfall in the amount of available materials related to the construction and modernisation of transportation infrastructure. Thus, a typical landfill of a power station was chosen and the aim of the study was to assess the suitability of an ash-slag landfill mixture for construction engineering purposes. The following physicochemical analyses were conducted: pH, specific electrical conductivity and determination of the leachability of basic (Ca, Na, K and Mg) and trace elements (Cd, Pb, Cr, Zn and Cu). The content of selected basic and trace elements were determined in the eluates by FAAS and standard methods were applied for geotechnical analyses. The most likely conditions were assumed to the model. The mixture will not jeopardize surface water quality in terms of the concentrations of basic, hazardous or priority elements. The content of these elements also does not exceed permissible concentrations for groundwater. The conductance and pH of the eluates are in compliance with current laws. The solid mixture has favourable geotechnical parameters which are significantly dependent on moisture content. The slope stability calculations for embankments created from the mixture at optimum moisture content and high compaction (Is ≥ 0.95) indicate that they will be stable even in the case of high gradients (1:1.5). The slopes will be unstable in conditions of submersion, which should not occur if we assume the embankment will be used for passive flood protection
Źródło:
Geology, Geophysics and Environment; 2017, 43, 2; 127-137
2299-8004
2353-0790
Pojawia się w:
Geology, Geophysics and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using Anthropogenic Waste (Steel Slag) to Enhance Mechanical and Wear Properties of a Commercial Aluminium Alloy A356
Autorzy:
Sridhar Raja, K. S.
Bupesh Raja, V. K.
Gupta, Manoj
Powiązania:
https://bibliotekanauki.pl/articles/353592.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
A356
steel slag
wear resistance
tensile strength
industrial waste
environmental hazard
Opis:
The present study addresses the utilization of induction furnace steel slag which is an anthropogenic waste, for enhancing the mechanical properties of a commercial aluminium alloy A356. Different weight percentage (3wt%, 6wt%, 9wt%, and 12wt%) of steel slag particles in 1 to 10 μm size range were used as reinforcing particles in aluminium alloy A356 matrix. The composites were prepared through stir casting technique. The results revealed an improvement in mechanical properties (i.e. microhardness and tensile strength) and wear resistance with an increase in weight percentage of the steel slag particles. This research work shows promising results for the utilization of the steel slag for enhancing the properties of aluminium alloy A356 at no additional cost while assisting at same time in alleviating land pollution.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 279-284
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of groundwater in aluminium slag disposal area
Autorzy:
Putranto, Thomas Triadi
Febriane, Wenny
Powiązania:
https://bibliotekanauki.pl/articles/27312652.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
aluminium slag waste
geospatial analysis
heavy metals pollution index
multivariate analysis
water quality index
Opis:
Aluminium slag waste is a residue from aluminium recycling activities, classified as hazardous waste so its disposal into the environment without processing can cause environmental problems, including groundwater pollution. There are 90 illegal dumping areas for aluminium slag waste spread in the Sumobito District, Jombang Regency. This study aims to evaluate the quality of shallow groundwater surrounding aluminium slag disposal in the Sumobito District for drinking water. The methods applied an integrated water quality index (WQI) and heavy metal pollution index (HPI), multivariate analysis (principal component analysis (PCA) and hierarchical clustering analysis (HCA)), and geospatial analysis for assessing groundwater quality. The field campaign conducted 40 groundwater samples of the dug wells for measuring the groundwater level and 30 of them were analysed for the chemical contents. The results showed that some locations exceeded the quality standards for total dissolved solids (TDS), electrical conductivity (EC), and Al2+ . The WQI shows that 7% of dug well samples are in poor drinking water condition, 73% are in good condition, and 20% are in excellent condition. The level of heavy metal contamination based on HPI is below the standard limit, but 13.3% of the water samples are classified as high contamination. The multivariate analysis shows that anthropogenic factors and natural sources/geogenic factors contributed to shallow groundwater quality in the study area. The geospatial map shows that the distribution of poor groundwater quality is in the northern area, following the direction of groundwater flow, and is a downstream area of aluminium slag waste contaminants.
Źródło:
Journal of Water and Land Development; 2023, 57; 78--90
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Processing and utilization of metallurgical slags
Autorzy:
Pribulova, A.
Futas, P.
Baricova, D.
Powiązania:
https://bibliotekanauki.pl/articles/111611.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
metallurgical slag
waste
concrete
cement
żużel hutniczy
odpady
beton
Opis:
Metallurgy and foundry industry create a huge amount of slags that are by-products by production of pig iron, steel and cast iron. Slags are produced in a very large amount in pyrometallurgical processes, and are huge sources of waste if not properly recycled and utilized. With rapid growth of industrialization, the available land for land-filling of large quantity of metallurgical slags is reducing all over the world and disposal cost becomes increasingly higher. Metallurgical slags from different metallurgical processes are treated and utilized in different ways based on the different slag characteristics. The most economic and efficient option for reducing the metallurgical waste is through recycling, which is a significant contribution to saving natural resources and reducing CO2 emissions characteristic of slags and their treatment and utilization are given in the paper. Slags from pig iron and steel production are used most frequently in building industry. From experiments using blast furnace slag and granulated blast furnace slag as grave an water glass as binder follows that the best results – the best values of compression strength and tensile strength were reached by using of 18% of water glass as solidification activating agent. according to cubic compression strength, mixture from 50% blast furnace gravel, 50% granulated blast furnace slag and 18% water glass falls into C35/45 class of concretes. This concrete also fulfils strength requirements for road concrete, it even exceeds them considerably and therefore it could find an application in construction of road communications or in production of concrete slabs.
Źródło:
Production Engineering Archives; 2016, 11, 2; 2-5
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratoryjne badania żużla ze spalania odpadów komunalnych dla zastosowań w budownictwie drogowym
Laboratory tests of slag from combustion of municipal solid waste incineration plant for road construction applications
Autorzy:
Martysz, Gabriel
Węgliński, Szymon
Powiązania:
https://bibliotekanauki.pl/articles/2055944.pdf
Data publikacji:
2021
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
żużel z odpadów komunalnych
spalanie odpadów komunalnych
badanie laboratoryjne
właściwości fizykomechaniczne
jednorodność
zastosowanie
budownictwo drogowe
municipal waste slag
municipal waste incineration
laboratory test
physico-mechanical properties
homogeneity
application
road construction
Opis:
Od kilku lat na terenie Polski pojawiają się Instalacje Termicznego Przekształcania Odpadów Komunalnych (ITPOK), które w wyniku spalania odpadów produkują żużle. Materiał ten, po odpowiednich badaniach laboratoryjnych, może zostać wykorzystany do produkcji materiałów budowlanych przeznaczonych dla drogownictwa. W artykule wskazano podstawowe badania laboratoryjne oraz nakreślono kierunki wykorzystania kruszywa w warstwach konstrukcji nawierzchni.
For several years, Municipal Waste Incineration Plants have been prepared in Poland, which are producing slags as a result of waste incineration. This material, after appropriate laboratory tests, can be used in the production of building materials for road construction. The article indicates the basic laboratory tests and outlines the directions of aggregate use in the layers of the pavement structure.
Źródło:
Przegląd Budowlany; 2021, 92, 11-12; 77--80
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problematyka wykorzystania odpadów typu żużle ze spalarni śmieci komunalnych do produkcji betonów
The issue of using slag waste from municipal waste incinerator to produce concrete
Autorzy:
Mądrawski, J.
Kostrzewski, W.
Smoczkiewicz-Wojciechowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/162955.pdf
Data publikacji:
2017
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
odpad komunalny
spalarnia śmieci
żużel
wykorzystanie odpadów
dodatek do betonu
municipal waste
incineration plant
slag
waste utilization
concrete additive
Opis:
W artykule przedstawiono problematykę związaną z możliwością wykorzystania odpadów pochodzących ze spalarni śmieci komunalnych typu żużel i popiół, do produkcji betonów. Pomysł wykorzystania odpadów paleniskowych nie jest nowy, lecz wiele problemów związanych z jego praktycznym wykorzystaniem nadal pozostaje aktualnych. Celem pracy jest ocena przydatności kruszyw pochodzących ze spalarni śmieci zlokalizowanej w okolicy Poznania do stworzenia materiałów budowlanych bezpiecznych dla środowiska i jednocześnie charakteryzujących się jak najlepszymi właściwościami mechanicznymi.
The article presents the possibility of using waste from municipal waste incineration plants to produce concrete. The idea of using MSWI (Municipal Solid Waste Incinerator) is not new, but many problems related to its practical use still remain current. The aim of the study is to estimate the usefulness of aggregates from waste incineration located in the Poznan city area to prepare building materials that are safe for the environment and with good mechanical properties at the same time.
Źródło:
Przegląd Budowlany; 2017, 88, 9; 105-107
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nasyp kolejowy na terenie Huty Miedzi Głogów, wykonany z innowacyjnego kruszywa pochodzenia pomiedziowego
Development of railway embankment in Glogow Copper Smelter by use of innovative copper slag aggregate
Autorzy:
Machowski, M.
Łopatka, A.
Tondera, M.
Gambal, P.
Kordiumow, R.
Kozieł, E.
Powiązania:
https://bibliotekanauki.pl/articles/164431.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
kruszywo pomiedziowe
żużel odpadowy
konsolidacja statyczna
geosyntetyki
copper slag aggregate
waste slag
static consolidation
geosynthetics
Opis:
Obecnie, z uwagi na znaczne zurbanizowanie, rozbudowa istniejących zakładów przemysłowych wiąże się z wykorzystaniem tych terenów, które do tej pory traktowano jako nieprzydatne pod inwestycje. Są to miejsca o małej nośności podłoża lub silnie zdegradowane w wyniku działalności przemysłowej. Artykuł dotyczy problemów związanych z budową nasypu kolejowego na słabonośnym podłożu o złożonej budowie z uwagi na wykształcenie litologiczne oraz przeobrażenia antropogeniczne. Wybór konsolidacji statycznej, w celu redukcji osiadań eksploatacyjnych, wiązał się z koniecznością wzmocnienia korpusu nasypu kolejowego. Dodatkowe zastosowanie w tym celu mieszanki piasku i innowacyjnego kruszywa pomiedziowego w połączeniu z geosyntetycznymi konstrukcjami zbrojącymi wymagało od Projektanta niestandardowego podejścia projektowego. Z uwagi na trudne warunki pracy zbrojenia, kwestia prawidłowego doboru materiału geosyntetycznego nabrała szczególnej wagi.
Nowadays, due to large-scale urbanization, expansion of the existing industrial plants is associated with exploitation of the areas which have been regarded as unsuitable for investment so far. These are places of low soil bearing capacity or heavily degraded by human industrial activity (uncontrolled embankment). This paper brings up the issues related to the implementation stage of the project "The modernization of pyrometallurgy in Copperworks Glogow I" which includes foundation soil of complex structure - either because of its natural lithology or the existing uncontrolled embankments of anthropogenic origin - used for construction of railway embankments. Choosing the static consolidation in order to reduce exploitation settlement was connected with the need of strengthening the embankment. Due to the difficult operating conditions of the reinforcements, a new design approach and selection of the proper geosynthetic materials has become a very important issue to the designer.
Źródło:
Przegląd Górniczy; 2014, 70, 6; 42-48
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozporządzenie REACH a odpady – gdzie tkwią problemy?
REACH Regulation vs. waste – where are the problems embedded in?
Autorzy:
Krześlak, A.
Palczewska-Tulińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/142300.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
rozporządzenie REACH
chemikalia
ustawa o odpadach
odpady
odzysk
rejestracja substancji
wprowadzenie do obrotu
produkt uboczny
utrata statusu odpadu
uboczne produkty spalania węgla
żużle i popioły
pasta ołowiowa
odpad niebezpieczny
Biuro ds. Substancji Chemicznych
REACH regulation
chemicals
Waste Act
waste
recovery
substance registration
placing on the market
by-product
cease to be waste
coal combustion by-products
slag and ashes
leaded paste
hazardous waste
Bureau for Chemical Substances
European Chemicals Agency
Opis:
W publikacji omówiono główne problemy dotyczące braku spójności legislacji odpadowej z wymaganiami rozporządzenia REACH. Wymieniono bardziej istotne zapisy odnoszące się do odpadów w rozporządzeniu REACH oraz legislacji odpadowej. Następnie dokonano analizy pod kątem istniejących konsekwencji zapisów prawa, ze szczególnym uwzględnieniem pojęcia „produktu ubocznego” oraz „odpadu, który utracił status odpadu” oraz sytuacji energetyki zawodowej, dotkniętej jako pierwsza branża problemem braku spójności w istniejących zapisach. Na koniec przedyskutowano kwestię braku pragmatycznego podejścia do zapisów prawnych na przykładzie importu pasty ołowiowej, która miała służyć jako uzupełniający surowiec w produkcji akumulatorów. Artykuł zakończono wnioskami oraz podsumowaniem w postaci cytatów pochodzących od respondentów Punktu Konsultacyjnego ds. REACH i CLP Ministerstwa Gospodarki.
The problems concerning lack of the consistency between waste legislation and REACH regulation requirements have been discussed. The most important provisions referring to REACH and waste legislation have been mentioned. Then the assessment of consequences of legal provisions with particular attention to the term „by-product” and „waste ceased to be waste” has been made. Also situation of power industry affected as the first sector by inconsistency in existing legal provisions has been analyzed. Finally question of lack of pragmatic approach to the legal provisions has been raised on the example of import of leaded paste to be used as supplementary feedstock for the production of car batteries. Article includes conclusions in the end and summing up in the shape of some quotes originating from respondents of the REACH & CLP Consulting Point of the Polish Ministry of Economy.
Źródło:
Chemik; 2014, 68, 10; 821-830
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Role of the Granulated Blast Furnace Slag in Sustainable Cement Production and Waste Management
Rola granulowanych żużli wielkopiecowych w zrównoważonej produkcji cementu oraz gospodarce odpadami
Autorzy:
KRÓL, Anna
Powiązania:
https://bibliotekanauki.pl/articles/435400.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Opolski
Tematy:
granulated blast furnace slag
waste management
cement production
solidification
heavy metals
granulowany żużel wielkopiecowy
gospodarka odpadami
produkcja cementu
zestalanie
metale ciężkie
Opis:
Sustainable development is a call to prudence and moderation efforts to reconcile key areas for humanity: ecological, economic and social development. Consistent with the idea of sustainable development is the use of by-products from other industries for the production of clinker, cement and concrete. These products can successfully replace natural minerals or clinker in cement production. This considerably reduces the extraction of natural resources and increases the economy of the process, without compromising the quality of the product. In cement production technology increasingly important role starts to play also active mineral additives. In the world's cement production process it has economic, ecological, but also technological base. The aim is in fact to obtain such cements whose properties will receive high durability concrete, and the use of suitable mineral supplements can be helpful in this. Known mineral additive is granulated blast furnace slag - waste coming from the steel industry. This material is increasingly being used also in the process of solidification of hazardous waste. The use of granulated blast furnace slag in the cement industry and in the process of solidification of galvanic sludge is presented in the paper with the presentation of the author's own research in this field.
Zrównoważony rozwój to wezwanie do zachowań innowacyjnych choć ostrożnych, w celu pogodzenia kluczowych obszarów dla ludzkości: rozwoju ekologicznego, gospodarczego i społecznego. Zgodnie z ideą zrównoważonego rozwoju jest wykorzystanie produktów ubocznych z innych branż do produkcji klinkieru, cementu i betonu. Produkty te mogą z powodzeniem zastąpić naturalne minerały lub klinkier w produkcji cementu. To znacząco zmniejsza wydobycie zasobów naturalnych i zwiększa ekonomikę procesu, bez pogorszenia jakości produktu. W technologii produkcji cementu coraz ważniejsza jest rola aktywnych dodatków mineralnych. W procesie produkcji cementu na świecie ma podstawy ekonomiczne, ekologiczne, ale i technologiczne. Celem użycia dodatków jest w istocie produkcja takich cementów, których właściwości pozwolą uzyskać beton o wysokiej wytrzymałości. Znanym dodatkiem mineralnym jest granulowany żużel wielkopiecowy czyli odpad pochodzący z hutnictwa. Ten materiał jest coraz częściej stosowany także w procesie stabilizacji odpadów niebezpiecznych. Zastosowanie żużla granulowanego w przemyśle cementowym oraz w procesie zestalania osadów galwanicznych przedstawiono w pracy wraz z prezentacją własnych badań prowadzonych przez autora w tej dziedzinie.
Źródło:
Economic and Environmental Studies; 2017, 17, 43; 613-624
1642-2597
2081-8319
Pojawia się w:
Economic and Environmental Studies
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies