Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "waste plastics" wg kryterium: Temat


Tytuł:
Microplastics from Plastic Waste as a Limitation of Sustainability of the Environment
Autorzy:
Grąz, Katarzyna
Generowicz, Agnieszka
Kwaśny, Justyna
Gronba-Chyła, Anna
Kwaśnicki, Paweł
Ciuła, Józef
Łapiński, Jacek
Bajdur, Wioletta
Powiązania:
https://bibliotekanauki.pl/articles/30145698.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
nanoparticles
waste plastics
DLS
secondary plastic
Opis:
The massive emergence of plastics has contributed to their widespread use in everyday life. Unfortunately, the lack of appropriate technologies for processing these materials has contributed to environmental pollution by plastic particles. This study investigated the possibility of obtaining nanoparticles from selected plastics such as polyethylene and polyethylene terephthalate. Polyethylene was obtained from plastic bag waste, and polyethylene terephthalate was from crushed plastic bottles of mineral water. The first stage of nanoparticle production was to grind the collected used plastic waste, i.e., plastic bags and plastic bottles, to the smallest possible size using a cutting mill. Next, the waste was ground in a planetary-ball mill and then homogenised in a homogeniser. The particle size distribution of the obtained particles for selected waste plastics was examined using the Dynamic Light Scattering (DLS) method. The objective of the work was achieved – as a result of the performed procedures, nanoparticles of waste plastics were obtained. The following average sizes for particular materials were obtained: plastic bottles (PET) 212.81 nm, plastic bags (PE) 208.14 nm, and smaller particles, e.g. 27.74 nm.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 367-373
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sustainable Approaches to Plastics
Autorzy:
Frąckowiak, Stanisław
Powiązania:
https://bibliotekanauki.pl/articles/27322947.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
waste plastics
mechanical recycling
biopolymers, wastewater
Opis:
Environmental concern and awareness have led to the development of different sustainable approaches to reduce the environmental impact of waste plastics. A brief literature review was conducted to evaluate recent challenges and emerging ideas on this topic. The two most noticeable approaches identified here are the introduction of biodegradable polymers as replacements for conventional plastics and recycling post-consumer waste plastics. The sustainable approach protects the environment, reducing energy consumption and greenhouse gas emissions.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 128--140
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cover of Cylinder Lattice Plastic Convert into Fuel
Autorzy:
Sarker, M.
Rashid, M. M.
Powiązania:
https://bibliotekanauki.pl/articles/412122.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
plastic lattice
conversion
fuel
hydrocarbon
waste plastics material
GC-MS
Opis:
Waste plastic of cylinder lattice to liquid fuel production process was performing two step processes. 1st step process was perform muffle furnace with ceramic crucible and 2nd step process was perform glass reactor with condensation unit. Thermal degradation process was performing with furnace and temperature was 410 ?C and reactor temperature was 420 ?C. Muffle furnace was use for solid hard shape of plastic melting purpose and glass reactor was use for liquid slurry to produce vapor purpose. Liquid slurry to produce vapor was condensed and collected liquid fuel and fuel density is 0.75 g/ml. Liquid fuel production conversation rate was 71.05 %. Fuel was analysis by GC/MS and carbon chains obtain C3 to C23 from GC/MS chromatogram. Fuel color is light yellow and fuel is ignited.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 6; 17-30
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odzysk energetyczny odpadowych tworzyw sztucznych
Energy recovery from waste plastics
Autorzy:
Wasielewski, R
Siudyga, T.
Powiązania:
https://bibliotekanauki.pl/articles/1215984.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
odzysk energii
odpady tworzyw sztucznych
termiczne przekształcanie odpadów
energy recovery
waste plastics
waste incineration
Opis:
Przedstawiono zagadnienia technologiczne i formalno-prawne związane z energetycznym wykorzystaniem odpadowych tworzyw sztucznych (OTS). Odzysk energii z OTS może być prowadzony w wariancie bezpośrednim, poprzez spalanie odpadów komunalnych zawierających frakcję polimerów, w spalarniach odpadów komunalnych lub w formie składników stałych paliw wtórnych. Taki proces odzysku energii podlega uwarunkowaniom formalnoprawnym związanym z termicznym przekształcaniem odpadów. Innym wariantem jest termochemiczna przeróbka OTS w kierunku uzyskania substytutu paliw płynnych, których energetyczne wykorzystanie nie podlega uwarunkowaniom dla termicznego przekształcania odpadów.
The paper presents technological, formal and legal aspects of energetic use of waste plastics. Energy recovery from waste plastics may be conducted directly by combustion of municipal waste containing polymer fraction in municipal waste incineration plants or as components of solid recovered fuels. The process of energy recovery is related to relevant formal and legal requirements for thermal conversion of wastes. Another option is the thermo-chemical conversion of waste plastics to substitute of liquid fuels; its further use is not associated with mentioned above requirements for waste incineration.
Źródło:
Chemik; 2013, 67, 5; 435-445
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ dodatków odpadowych tworzyw sztucznych na parametry energetyczne materiałów wybuchowych typu ANFO
Effect of plastic waste additives on the energetic parameters of ANFO explosives
Autorzy:
Biegańska, J.
Barański, K.
Powiązania:
https://bibliotekanauki.pl/articles/92595.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
ANFO
odpadowe tworzywa sztuczne
parametry termodynamiczne
materiały wybuchowe
program ZMWCyw
waste plastics
thermodynamic parameters
explosives
ZMWCyw program
Opis:
W artykule przeprowadzono symulację wpływu dodatków wybranych odpadowych tworzyw sztucznych na właściwości strzałowe materiałów wybuchowych typu ANFO (saletrol, ang. Ammonium Nitrate-Fuel Oil) za pomocą programu do obliczeń termodynamicznych ZMWCyw. Zaproponowano modyfikację składu chemicznego saletrolu poprzez zastępowanie jego składników wybranymi odpadowymi tworzywami sztucznymi w różnych proporcjach. Przedstawiono wyniki obliczeń parametrów termodynamicznych zmodyfikowanych w ten sposób ANFO. Określono efektywność energetyczną nowo powstałych mieszanek w celu wyboru optymalnego składu nowo powstałego materiału wybuchowego.
In this article, the influence of additives of selected waste plastics on ANFO (Ammonium Nitrate Fuel Oil) type explosives was investigated using the thermodynamic calculation program ZMWCyw. It was proposed to modify the chemical composition of ANFO by replacing its components with selected plastic waste in varying proportions. Results of calculations of the thermodynamic parameters modified in this way are presented. The energy efficiency of the newly formed blends was determined to select the optimum composition of the newly created explosive.
Źródło:
Materiały Wysokoenergetyczne; 2017, T. 9; 145-158
2083-0165
Pojawia się w:
Materiały Wysokoenergetyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odpady tworzyw sztucznych jako źródło paliw stałych i płynnych
Waste plastics as a source of solid and liquid fuels
Autorzy:
Mianowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/1215945.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
odpadowe tworzywa sztuczne
paliwa alternatywne
SRF
paliwa płynne
paliwa motorowe
waste plastics
alternate fuels
liquid fuels
motor fuels
Opis:
Na tle możliwości wykorzystania odpadowych tworzyw sztucznych, zwłaszcza odpadowych poliolefin, przedstawiono ten problem w aspekcie krajowych możliwości. Nie jest to przegląd literaturowy; zasadniczy nurt wiąże się z realiami przemysłowymi. Artykuł ogranicza się do retrospektywnej oceny wariantu wytwarzania paliw płynnych z tłem wkładu prac własnych.
The problem is presented here taking into account Polish capabilities, against the background of the possibilities of using waste plastics. This is not a literature review – the main thread concerns industrial reality. The article is restricted to a retrospective assessment of the variant of liquid fuel manufacturing and the background is constituted by own works.
Źródło:
Chemik; 2013, 67, 5; 423-434
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Znaczenie zarządzania cyklem życia w gospodarce o obiegu zamkniętym na przykładzie tworzyw polimerowych
Significance of life cycle management in the circular economy on the example of polymer
Autorzy:
Czaplicka-Kolarz, K.
Korol, J.
Kruczek, M.
Powiązania:
https://bibliotekanauki.pl/articles/326523.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
analiza cyklu życia
gospodarka o obiegu zamkniętym
odpady tworzyw sztucznych
life cycle assessment (LCA)
circular economy
waste plastics
Opis:
Celem gospodarki o obiegu zamkniętym jest stworzenie systemu przepływu materiałów zgodnego z ideą „od kołyski do kołyski” (from cradle to cradle). Podejście takie wiąże się z zarządzaniem cyklem życia produktów w odniesieniu do wszystkich etapów, począwszy od wydobycia aż po pełne wykorzystanie wszystkich odpadów, które zgodnie z koncepcją tej gospodarki stanowią surowce dla innych procesów technologicznych. W artykule przedstawiono różne warianty zagospodarowania odpadów z tworzyw sztucznych i ich ocenę pod kątem wpływu na środowiskowo. Spośród analizowanych wariantów zagospodarowania najkorzystniejszym – ze środowiskowego punktu widzenia – jest recykling materiałowy, który stanowi również preferowane rozwiązanie w gospodarce o obiegu zamkniętym.
The aim of the circular economy is to create a system based on the flow of materials compatible with the idea of “from cradle to cradle”. This approach involves managing the life cycle of products in all stages from exploration through to full utilization of all waste, according to the concept of circular economy wastes are the raw materials for other processes. The paper presents various options of plastic waste management. The different variants of plastic waste management were assessed for their impact on the environment. Among the analyzed options of plastic waste management, the most advantageous from the environmental point of view, is material recycling. Recycling is also the most preferred method of waste management in the circular economy.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2017, 101; 85-96
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania nad hydrorafinacją frakcji węglowodorowej z destrukcyjnej przeróbki odpadowych tworzyw sztucznych
Hydrorefining of hydrocarbon fraction from waste plastics cracking
Autorzy:
Budzyńska-Józwiak, A.
Sosnowska-Maciukiewicz, L.
Szumacher, S.
Powiązania:
https://bibliotekanauki.pl/articles/258125.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
kraking
odpadowe tworzywa sztuczne
hydroodchlorowanie
hydrorafinacja
katalizator
reaktor przepływowy ze stałym złożem
cracking
waste plastics
hydrodechlorination
hydrorefining
catalyst
fixed bed flow reactor
Opis:
W wyniku krakingu mieszaniny tworzyw sztucznych otrzymano frakcję węglowodorową o szerokim zakresie temperatury wrzenia, zawierającą związki heteroorganiczne. Z otrzymanego produktu wydzielono frakcję o zakresie temperatury wrzenia do 330°C. Frakcję tę poddano hydrorafinacji na katalizatorze stosowanym w rafineryjnych instalacjach hydroodsiarczania (NiMo/Al2O3). Stwierdzono całkowite hydroodchlorowanie frakcji pod ciśnieniem 3 MPa, przy przepływie surowca LHSV = 1 h-1, stosunku wodór/surowiec 300 Ndm3/dm3, w temperaturze 260°C i wyższej. W trakcie procesu przebiegało także nasycanie węglowodorów olefinowych. Konwersja rosła wraz ze wzrostem temperatury prowadzenia procesu. Ustalono, że chlorek amonu, tworzący się podczas chłodzenia produktu hydrorafinacji, osadza się na ściankach rurociągów i aparatów.
The hydrocarbon fraction of vast boiling temperature range was obtained from cracking of waste plastics. The product contained heterorganic compounds. The fraction of boiling temperature below 330°C was isolated from the product by distillation and hydrorefined on NiMo/Al2O3 catalyst. Thecomplete hydrodechlorination was found at 3 MPa, LHSV=1 h-1, hydrogen/crude ratio 300 Ndm3/dm3 and temperature equal to 260°C and higher. Saturation of olefins during the process was also noticed. The higher temperature, the higher yield of olefins hydrogenation. The by- product of process was ammonium chloride fouled on pipes and vessels after cooling.
Źródło:
Problemy Eksploatacji; 2008, 4; 25-37
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automated test bench for research on electrostatic separation in plastic recycling application
Autorzy:
Regulski, Roman
Czarnecka-Komorowska, Dorota
Jędryczka, Cezary
Sędziak, Dariusz
Rybarczyk, Dominik
Netter, Krzysztof
Barański, Mariusz
Barczewski, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/2090721.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
recycling
automotive plastics waste
separation
electrostatic separator
recykling
odpady tworzyw sztucznych z samochodów
separacja
separator elektrostatyczny
Opis:
Many researchers in the developed countries have been intensively seeking effective methods of plastic recycling over the past years. Those techniques are necessary to protect our natural environment and save non-renewable resources. This paper presents the concept of an electrostatic separator designed as a test bench dedicated to the separation of mixed plastic waste from the automotive industry. According to the current policy of the European Union on the recycling process of the automotive industry, all these waste materials must be recycled further for re-entering into the life cycle (according to the circular economy). In this paper, the proposed concept and design of the test bench were offered the feasibility to conduct research and technological tests of the electrostatic separation process of mixed plastics. The designed test bench facilitated assessing the impact of positions of high-voltage electrodes, the value and polarity of the high voltage, the variable speed of feeders and drums, and also triboelectrification parameters (like time and intensity) on the process, among others. A specialized computer vision system has been proposed and developed to enable quick and reliable evaluation of the impact of process parameters on the efficiency of electrostatic separation. The preliminary results of the conducted tests indicated that the proposed innovative design of the research stand ensures high research potential, thanks to the high accuracy of mixed plastics in a short time. The results showed the significant impact of the corona electrode position and the value of the applied voltage on the separation process effectiveness. It can be concluded that the results confirmed the ability to determine optimally the values of the studied parameters, in terms of plastic separation effectiveness. This study showed that this concept of an electrostatic separator designed as a test bench dedicated for separation of mixed plastic waste can be widely applied in the recycling plastic industry.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 2; e136719, 1--11
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automated test bench for research on electrostatic separation in plastic recycling application
Autorzy:
Regulski, Roman
Czarnecka-Komorowska, Dorota
Jędryczka, Cezary
Sędziak, Dariusz
Rybarczyk, Dominik
Netter, Krzysztof
Barański, Mariusz
Barczewski, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/2173591.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
recycling
automotive plastics waste
separation
electrostatic separator
recykling
odpady tworzyw sztucznych z samochodów
separacja
separator elektrostatyczny
Opis:
Many researchers in the developed countries have been intensively seeking effective methods of plastic recycling over the past years. Those techniques are necessary to protect our natural environment and save non-renewable resources. This paper presents the concept of an electrostatic separator designed as a test bench dedicated to the separation of mixed plastic waste from the automotive industry. According to the current policy of the European Union on the recycling process of the automotive industry, all these waste materials must be recycled further for re-entering into the life cycle (according to the circular economy). In this paper, the proposed concept and design of the test bench were offered the feasibility to conduct research and technological tests of the electrostatic separation process of mixed plastics. The designed test bench facilitated assessing the impact of positions of high-voltage electrodes, the value and polarity of the high voltage, the variable speed of feeders and drums, and also triboelectrification parameters (like time and intensity) on the process, among others. A specialized computer vision system has been proposed and developed to enable quick and reliable evaluation of the impact of process parameters on the efficiency of electrostatic separation. The preliminary results of the conducted tests indicated that the proposed innovative design of the research stand ensures high research potential, thanks to the high accuracy of mixed plastics in a short time. The results showed the significant impact of the corona electrode position and the value of the applied voltage on the separation process effectiveness. It can be concluded that the results confirmed the ability to determine optimally the values of the studied parameters, in terms of plastic separation effectiveness. This study showed that this concept of an electrostatic separator designed as a test bench dedicated for separation of mixed plastic waste can be widely applied in the recycling plastic industry.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 2; art. no. e136719
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal and thermo-catalytic degradation of polyolefins as a simple and efficient method of landfill clearing
Autorzy:
Tomaszewska, K.
Kałużna-Czaplińska, J.
Jóźwiak, W. K.
Powiązania:
https://bibliotekanauki.pl/articles/779208.pdf
Data publikacji:
2010
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
polietylen
polipropylen
poliolefin
komunalne odpady z tworzyw sztucznych
degradacja termiczna
degradacja termokatalityczna
składniki płynnego paliwa
kinetyka
polyethylene
polypropylene
polyolefins
municipal waste plastics
thermal degradation
thermocatalytic degration
liquid fuels component
kinetics
Opis:
Thermal degradation of the low density polyethylene (LDPE), polypropylene (PP) and the municipal waste plastics was investigated. The thermo-catalytic degradation of LDPE and PP was studied in the presence of the following catalysts: four different types of montmorillonite: K5, K10, K20, K30 and – for comparison – zeolites (natural – clinoptilolite, Y Na+ and YH+). Thermal analyses TG-DTA-MS of polymers and polymercatalyst mixtures were carried out in an argon flow atmosphere in isothermal and dynamic conditions. The following order was found: in lowering the reaction temperature for LDPE degradation YH+> mK5 > mK20 = mK30 >mK10 > NZ > YNa+; for PP degradation: mK20 > mK5 = mK30 >mK10 > YH+> NZ >YNa+. The activity tests were carried out in a stainless steel batch reactor under atmospheric pressure in a wide temperature range of up to 410°C, and using the atmosphere of argon flow. The liquid products were analysed by the GC-MS method. The hydrocarbons in the liquid products from thermal degradation of polymers were broadly distributed in the carbon fractions of C8 to C26 – for LDPE and C6 to C31for PP.
Źródło:
Polish Journal of Chemical Technology; 2010, 12, 3; 50-57
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of fuels derived from pe plastic waste with a mixture of plastic recycling waste of codes: 1, 2, 4, 5, 6 and 7 based on low-temperature pyrolysis
Autorzy:
Lesnau, Anna
Tyliszczak, Mirosław
Powiązania:
https://bibliotekanauki.pl/articles/247043.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
pyrolysis
plastics
waste
Opis:
Thanks to their numerous advantages, plastics are becoming more and more widely used in all branches of industry. The quantities of products, their packaging and, consequently, the amount of synthetic polymer waste are steadily increasing, what poses a high risk to the environment due to their long decomposition time. To reduce waste production is practically impossible, therefore it is very important to constantly implement new and improve existing methods of waste treatment. The following article presents one of the alternative methods for synthetic polymer waste treatment, which is low-temperature pyrolysis. Two pyrolysis processes were carried out. During the first experiment a polyethylene plastic material was used, in the second experiment a mixture of typical household recycling waste of codes 1, 2, 4, 5, 6, and 7 were tested. During the thermal processing, the input material undergoes a chemical transformation due to breaking of long hydrocarbon chains. At the same time, high-energy density products, such as petroleum products and gas, are produced. The main advantage of the presented method is that it allows reducing preliminary technological processes to a minimum and it is easily automated, as it reduces the process to one compact installation. The reduction of the amount of stored waste and the recovery of petroleum derivatives, are additional advantages of pyrolysis implementation. That, in consequence allows reducing consumption of fossil fuel resources.
Źródło:
Journal of KONES; 2019, 26, 4; 149-154
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kompozyty na bazie odpadów poliolefin napełnianych popiołami lotnymi
Composites of recycled polyolefin plastics filled with fly ash
Autorzy:
Czarnecka-Komorowska, D.
Szostak, M.
Kujawa, N.
Powiązania:
https://bibliotekanauki.pl/articles/2071400.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
popioły lotne
recyklaty polietylenu
odpady z tworzyw sztucznych
kompozyty
właściwości mechaniczne
fly ash
recycled polyethylene
plastics waste
composites
mechanical properties
Opis:
W pracy zbadano wpływ zawartości napełniacza (popiołów lotnych) na właściwości mechaniczne kompozytów polimerowych sporządzonych na bazie odpadów polietylenu (rLDPE) i polipropylenu (PP). Kompozyty wykonano na wytłaczarce jednoślimakowej typu Brabender. Analiza zmian właściwości mechanicznych kompozytów dotyczyła takich cech jak: naprężenie zrywające, wydłużenie w chwili zerwania, moduł sprężystości przy rozciąganiu, udarność Charpy oraz twardość Shore 'a. Uzyskane wyniki badań wskazują, że wraz z zawartością napełniacza w kompozytach maleje wytrzymałość i odkształcenie, co należy tłumaczyć słabą adhezją międzyfazową pomiędzy cząstkami napełniacza, a matrycą polimerową oraz koncentracją naprężeń wokół cząstek napełniacza. Wyniki badań wskazują, istotne zwiększenie sztywności i twardości kompozytów poliolefiny/popioły lotne.
An effect of filler (fly ash) on mechanical properties of composites made up of recycled low-density polyethylene (LDPE) and polypropylene were investigated in this study. The composites were prepared using a single extruder Brabender. Tensile strength, elongation at break, Youngs modulus, impact strength and Shore 's hardness were checked. It was found that fly ash decreased the tensile strength and elongation at break for these composites. The decrease can be explained by stress concentration initiating cracks around filler particles. This provides a direct evidence of poor interfacial adhesion between FA filler and polymer matrix. Young 's modulus and hardness of composites tended to increase with the incorporation of fly ash. Key words: fly ash, recycled polyethylene, plastics waste, composites, mechanical properties
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 5; 31-32
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odpady z tworzyw sztucznych i ich recykling
Plastics waste and its recycling
Autorzy:
CICHY, Justyna
SOBCZYK, Wiktoria
Powiązania:
https://bibliotekanauki.pl/articles/457903.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Rzeszowski
Tematy:
odpady
tworzywa sztuczne
recykling
waste
plastics
recycling
Opis:
Artykuł opisuje główne źródła pochodzenia odpadów z tworzyw sztucznych oraz metody ich recyklingu. Scharakteryzowano tworzywa sztuczne, przedstawiając ich zalety i możliwości wykorzystania w przemyśle. Określono branże i produkty przez nie tworzone. Nowa ustawa o odpadach ukazuje producentom metody utylizacji odpadów. Istnieją trzy główne metody ponownego wykorzystania tworzyw sztucznych. Ich wybór zależy od jakości posiadanych odpadów, stosowanych technologii oraz bilansu ekonomicznego. W przyszłości mogą to być alternatywne metody redukcji odpadów i produkcji energii lub surowców wtórnych
The article describes major sources of plastics waste and methods of its recycling. It characterizes plastics and presents their advantages and possibilities of application in the industry. It defines branches of industry and products they produce from plastic. The new act about waste shows disposal methods of waste to producers. There are three major methods of reusing plastic. Choice is dependent on the quality of waste, applied technologies and economic balance. In the future there may be alternative methods of reducing waste and producing energy or recycling materials.
Źródło:
Edukacja-Technika-Informatyka; 2014, 5, 1; 348-353
2080-9069
Pojawia się w:
Edukacja-Technika-Informatyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie odpadów z tworzyw sztucznych do otrzymywania nanokompozytów
The use of polymer waste for nanocomposites production
Autorzy:
Tomaszewska, E.
Szczepański, Z.
Macko, M.
Tyszczuk, K.
Powiązania:
https://bibliotekanauki.pl/articles/401207.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
nanokompozyty
odpady
tworzywa sztuczne
nanomaterials and composites
plastics
waste
Opis:
Problem gromadzenia odpadów zawierających tworzywa sztuczne osiąga coraz większe rozmiary w otaczającym nas świecie. W przedstawionym artykule dokonano krótkiej charakterystyki zjawiska i zaproponowano sposób wykorzystania odpadów z tworzyw sztucznych pozyskanych z recyklingu do otrzymywania nanomateriałów kompozytowych za pomocą prostej i ekonomicznej technologii.
The problem of accumulation of waste containing plastics reaches alarming levels as products of polymeric materials are present in every area of life. These products represent a growing percentage of impurities and waste in Europe and the World. The paper is a short description of the phenomenon and proposes a method for the use of waste plastic obtained from recycling to receive nanomaterials and composites with a simple and economic technologies.
Źródło:
Inżynieria Ekologiczna; 2016, 46; 149-153
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies