Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "valve control" wg kryterium: Temat


Tytuł:
Improving the effective efficiency of a spark ignition engine through the use of a fully independent valve control system
Autorzy:
Żmudka, Zbigniew
Postrzednik, Stefan
Powiązania:
https://bibliotekanauki.pl/articles/2097609.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
SI engine
theoretical cycle
charge exchange
engine efficiency
independent valve control
silnik ZI
cykl teoretyczny
wymiana ładunku
sprawność silnika
niezależne sterowanie zaworami
Opis:
The article presents theoretical research of the proposed system of fully independent valve control (FIVC) of the SI engine. The analysis included controlling the movement of the intake valves, which results in adjusting the mass of the fresh charge to the current engine load, as well as the movement of the exhaust valves, where the main aim is to keep the rest of the exhaust gas in the cylinder, i.e. implementation of internal EGR. The open theoretical Seiliger-Sabathe cycle with the classic throttle regulation of load is the reference cycle for assessment of benefits and study of the effectiveness of obtaining work as a result of application of the FIVC system. A comparative analysis of the effectiveness of application of the proposed system was carried out based on the selected quantities: fuel dose, cycle work, relative work of charge exchange and cycle efficiency. The use of the FIVC to regulate the SI engine load makes it possible to eliminate the throttle and thus reduce the charge exchange work, especially in the partial load range. And this then leads to an increase in internal and effective work, which in turn results in an increase in the effective energy efficiency of an engine operation.
Źródło:
Combustion Engines; 2021, 60, 4; 30--35
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Study of the Effectiveness of a Combined Closure of the End Gate Pipeline Valve
Autorzy:
Herasymov, Henrikh H.
Gerasimov, Ievgenii G.
Ivanov, Sergiy Y.
Pinchuk, Oleg L.
Powiązania:
https://bibliotekanauki.pl/articles/241063.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
valve closure modes
experimental installation
valve control device
results of experimental studies
Opis:
One of the ways to ensure a reliable operation of irrigation systems is to protect them from water hammer (hydraulic shock) damage that occurs when starting or stopping a pumping station. This can be achieved by creating conditions in which a water hammer will not occur in the pressure pipeline as a result of closing the end gate valve (EGV). The aim of the present study was to investigate processes occurring in the pipeline during a linear closure of the EGV, during a closure with one break point and during an intermittent closure, as well as to verify the effectiveness of a combined end gate valve closure of the pipeline. Based on experimental data and calculations, the article recommends a linear closure of the EGV with one break point.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2019, 66, 1-2; 3-13
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Device for control the valvetrain and cylinder pressure of a spark-ignition engine
Autorzy:
Mamala, J.
Graba, M.
Bieniek, A.
Hennek, K.
Powiązania:
https://bibliotekanauki.pl/articles/241981.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
environmental protection
variable compression ratio
valve control
Opis:
This article describes the method of controlling an electric magnetic linear actuator that moves an inlet valve of an internal combustion engine. Thanks to the use of the electric control of the inlet valve of the internal combustion engine, it was possible to implement a variable effective compression ratio of the operating power unit, adapting it to the current needs and engine load. In this design, valvetrain was modified by introducing an autonomous intake valve operation with the use of a specially designed electromagnetic actuator. The introduction of this system necessitated an additional modification of the intake camshaft. The control was carried out with the use of a real-time controller with a built-in FPGA unit. The proposed design of a system with an electromagnetic actuator will allow obtaining an additional degree of freedom in the control unit. Particular attention should be paid to registered values or air pressure in the intake stroke for a closed or partially opened throttle, which generates significant pumping losses. The use of an electromagnetic actuator in the intake can help reduce said losses.
Źródło:
Journal of KONES; 2018, 25, 3; 339-346
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of dynamic parameters of the selected components within digitally controlled hydraulic system
Autorzy:
Kamiński, M.
Szlagowski, J.
Dąbrowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/950156.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
mobile hydraulics
proportional directional control valve
hydraulic cylinder control
electro-hydraulic pilot valve
hydraulic system modelling
hydraulika mobilna
sterowanie siłownikiem hydraulicznym
elektrohydrauliczny zawór pilotowy
modelowanie układu hydraulicznego
Opis:
Dynamic parameters characterizing proportional hydraulic components are essential factors affecting the performance of the construction machinery automatic control system. Knowledge of these parameters is inevitable in modelling the automatically controlled hydraulic power systems as well as designing and analysing the control algorithms. This article presents a methodology of assessing the dynamic parameters of selected components being part of digitally controlled hydraulic power system. The analysed system comprised a typical for mobile hydraulics applications PVG32 proportional directional control valve (DCV) and a variable displacement piston pump. The control system utilised an MC088 PLC controller with specifically prepared and configured software. The measuring system was based on CANbus, which, combined with the PLC used, allowed for flexible configuration of the sensor variables and logging both analogue and digital signals. Among others, the DCV characteristics, the response to step and sinusoidal inputs and DCV hysteresis were examined. The goal was to gather the data required for system modelling and to assess the importance and influence of the investigated parameters onto the model being created.
Źródło:
Journal of KONES; 2018, 25, 1; 205-214
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratory tests of stand-alone hydraulic piezo-valve
Autorzy:
Skorupka, Z.
Powiązania:
https://bibliotekanauki.pl/articles/244697.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
laboratory testing
hydraulic valve
flow control
piezo crystal
Opis:
Flow control inside the aviation landing gear shock absorbers is nowadays performed by fixed orifices or by the half-active spring based valves located inside of the device. All of the mentioned solutions are optimized on limited, mostly to one, landing scenarios due to their non-adjustable nature (even spring based valves are treated as passive due to their lack of actual real-time controllability). The easiest way of full hydraulic fluid flow control is to mount in its way a valve, which is able to seamlessly open and close causing the flow to change in wide range. Unfortunately, most of the used solutions are too large or not fast enough to fit the shock absorber requirements. The most promising way is to design tailor-made valve based on a piezo crystal actuator, which is most suitable due to its size and speed. Such a design has been made and tested by the engineers of the Institute of Aviation in Warsaw in Landing Gear Laboratory. In this article, the author describes test campaign of the hydraulic piezo-valve. Several tests have been made in order to assess the design correctness and to determine the basic parameters of the valve. Achieved results, presented in this article, show the full functionality of the solution in laboratory tests according to the design assumptions [8].
Źródło:
Journal of KONES; 2018, 25, 4; 385-381
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of losses and energy efficiency of hydrostatic drives with hydraulic cylinder
Autorzy:
Skorek, G.
Powiązania:
https://bibliotekanauki.pl/articles/260205.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
energy losses
energy efficiency
hydrostatic system
control structures
proportional directional control valve
cylinder
Opis:
Energy efficiency of hydrostatic transmissions, and especially efficiencies of drives with motor speed controlled by throttle, as well as efficiency of hydraulic servomechanisms can in fact be higher than the efficiency values most frequently given by the respective literature in this field. With the progress achieved in recent years in the development of hydraulic systems it is becoming necessary to develop methods for precise energy efficiency calculation of such systems. It is difficult to imagine that more and more, better and better machines and control elements could be used without the possibility of a mathematical tool at our disposal to enable an accurate analysis and assessment of behavior of the system in which such machines and control elements have been applied. The paper discusses energy savings using mathematical model of losses in elements, the energy efficiency of the system. There are possibilities to reduce energy losses in proportional control systems (in the pump, in the throttle control unit, especially in the cylinder), and thus to improve the energy efficiency of the throttling manifold. The considerations allow for comparison of the loss power resulting from the applied hydraulic control structure of the hydraulic cylinder and the power consumed by the pump from the electric motor that drives it, the power necessary to provide pump-driven hydraulic cylinder. The article shows the impact on the output (useful) power consumed in the considered systems, and the impact on the power consumed of the loss power in the individual elements. The paper presents also formulas of loss power, formulas of energy efficiency connected with investigated hydrostatic drives, two schematic diagrams of hydraulic systems, their principle of operation and problems of studying losses in elements and energy efficiency characteristics of systems consisting of a feed assembly, control set and cylinder. It also includes a subject matter connected with an energy loss power of hydrostatic systems with hydraulic cylinder controlled by proportional directional control valve. Diagrams of loss power of two hydraulic systems worked at the same parameters of speed and load of a cylinder, which were different due to structure and ability of energy saving, were presented and compared.
Źródło:
Polish Maritime Research; 2018, 4; 114-129
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Binary valves in analog control
Autorzy:
Mielewczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/242392.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
control
digital signal
actuator
control valve
transducer
positioner
Opis:
Continuous control systems are built with standard transducer measured signal, the controller and actuator. The actuator is responsible for the direct setting of the size of the control object. The actuator is connected to the control valve and the actuator position change signal into the flow rate of the working medium. Since the operating element is required the linear characteristics in the standard signal range to work. The other hand, the control valve provides flow characteristics linear or equal percentage. This flow control principle is used in various control systems. The actuator of the control valve is always equipped with a positioner, which corrects errors in the position of the valve relative to the input signal. The presented design of the control valve is an analogue system. Using the technique of converting multiple digital signal causes, the system is susceptible to damage. Remove the intermediate elements can improve the quality control and safety system. Such benefits give a design of the operating element based on direct digital processing unit and control program. The examples of control present article.
Źródło:
Journal of KONES; 2017, 24, 2; 141-146
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of the test stand for hydraulic active heave compensation system
Autorzy:
Jakubowski, A.
Kubacki, A.
Rybarczyk, D.
Powiązania:
https://bibliotekanauki.pl/articles/94114.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
active heave compensation
winch system
control systems
servo valve
układ kompensacji
system wyciągarki
systemy kontrolne
serwozawór
Opis:
The article presented here described the design of a test stand for hydraulic active heave compensation system. The simulation of sea waves is realized by the use of hydraulic cylinder. A hydraulic motor is used for sea waves compensation. The hydraulic cylinder and the hydraulic motor are controlled by electrohydraulic servo valves. For the measurements Authors used displacement sensor and incremental encoder. Control algorithm is implemented on the PLC. The performed tests included hydraulic actuator and hydraulic motor step responses.
Źródło:
Archives of Mechanical Technology and Materials; 2017, 37; 76-78
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the functional and service characteristics of the pneumatic system of an agricultural tractor with mechanical brakes using simulation methods
Wyznaczanie metodami symulacyjnymi właściwości funkcjonalnoużytkowych pneumatycznej instalacji ciągnika rolniczego z hamulcami mechanicznymi
Autorzy:
Kamiński, Z.
Kulikowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/1365946.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
farm tractor
pneumatics
braking system
energy-supplying device
trailer control valve
modeling
simulation
ciągnik rolniczy
pneumatyka
układ hamulcowy
zespół zasilający
zawór sterujący hamulcami przyczepy
modelowanie
symulacja
Opis:
Agricultural tractors are provided with air braking systems to control and operate braking systems of towed agricultural vehicles. Functional and operational characteristics of the tractor pneumatic system have a significant influence on the synchrony and operate speed of tractor-trailer unit braking system. This paper presents a mathematical model to predict the functional and operational characteristics of tractor pneumatic system by using a digital simulation. Modeling of the energy supplying device (compressor, governor, air reservoir) and modeling of the control device with trailer control valve mechanically connected with the tractor brakes is described. Results of statistical Kolmogorov-Smirnov test used to assess the conformity of experimental and simulated pressure transients during testing the compressor capacity and the response time of control circuit of Pronar 320AM tractor confirmed the computer model developed in Matlab-Simulink. The computer model can be used as a tool to assess the functional and operational characteristics of tractor pneumatic system within the designing process and as a subsystem to analyze transient processes in a pneumatic braking systems of the tractor-trailer units by using simulation methods. Mathematical models of selected components can be also used in modeling other pneumatic braking systems of commercial vehicles.
Ciągniki rolnicze są wyposażone w powietrzne instalacje hamulcowe do sterowania i napędu układów hamulcowych pojazdów ciągnionych. Właściwości funkcjonalno-użytkowe instalacji pneumatycznej ciągnika mają istotny wpływ na synchronię i szybkość działania układu hamulcowego zespołu ciągnik-przyczepa. W niniejszej pracy przedstawiono model matematyczny do prognozowania właściwości funkcjonalno-użytkowych układu pneumatycznego ciągnika metodą symulacji cyfrowej. Opisano modelowanie zespołu zasilającego (sprężarka, regulator, zbiornik powietrza) i modelowanie zespołu sterującego z zaworem sterującym hamulcami przyczepy połączonym mechanicznie z hamulcami ciągnika. Wyniki testu statystycznego Kołmogorowa-Smirnowa oceny zgodności doświadczalnych i symulowanych przebiegów czasowych ciśnienia podczas badania wydatku sprężarki i czasu reakcji obwodu sterującego ciągnika Pronar 320AM potwierdziły adekwatność opracowanego w Matlabie-Simulinku modelu komputerowego. Model komputerowy może być wykorzystany jako narzędzie do oceny właściwości eksploatacyjno-użytkowych instalacji pneumatycznej ciągnika w procesie projektowania oraz jako podsystem do analizy metodami symulacyjnymi procesów przejściowych w pneumatycznych układach hamulcowych zespołów ciągnik-przyczepa. Modele matematyczne wybranych komponentów instalacji mogą być również wykorzystane w modelowaniu innych pneumatycznych układów hamulcowych pojazdów użytkowych.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 3; 355-364
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model of Pressure Distribution in Vortex Flow Controls
Autorzy:
Mielczarek, S.
Sawicki, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/241160.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
rotational flow
flow control
vortex valve
storm wastewaters
Opis:
Vortex valves belong to the category of hydrodynamic flow controls. They are important and theoretically interesting devices, so complex from hydraulic point of view, that probably for this reason none rational concept of their operation has been proposed so far. In consequence, functioning of vortex valves is described by CFD-methods (computer-aided simulation of technical objects) or by means of simple empirical relations (using discharge coefficient or hydraulic loss coefficient). Such rational model of the considered device is proposed in the paper. It has a simple algebraic form, but is well grounded physically. The basic quantitative relationship, which describes the valve operation, i.e. dependence between the flow discharge and the circumferential pressure head, caused by the rotation, has been verified empirically. Conformity between calculated and measured parameters of the device allows for acceptation of the proposed concept.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2015, 62, 1-2; 41-52
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical Modelling of the Trailer Brake Control Valve for Simulation of the Air Brake System of Farm Tractors Equipped with Hydraulically Actuated Brakes
Modelowanie matematyczne zaworu sterującego hamulcami przyczepy do symulacji powietrznej instalacji hamulcowej ciągników rolniczych z hamulcami uruchamianymi hydraulicznie
Autorzy:
Kamiński, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1366046.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
farm tractor
air braking system
hydraulically actuated trailer brake control valve
mathematical modelling
simulation
ciągnik rolniczy
powietrzny układ hamulcowy
zawór sterujący hamulcami przyczepy uruchamiany hydraulicznie
modelowanie matematyczne
symulacja
Opis:
Agricultural tractors are equipped with air braking systems to control and operate the braking systems of towed agricultural vehicles. This paper presents a mathematical model of a hydraulically actuated trailer brake control valve. The results of the statistical Kolmogorov-Smirnov test confirmed the consistence between the experimental and simulated pressure transients during testing the response time of a farm tractor's control circuit. The computer model developed in Matlab-Simulink can be used as a tool to analyze transient processes by using simulation methods in the process of designing the air braking systems of farm tractors.
Ciągniki rolnicze są wyposażone w powietrzne instalacje hamulcowe do sterowania i napędu układów hamulcowych pojazdów ciągnionych. W niniejszej pracy przedstawiono model matematyczny uruchamianego hydraulicznie zaworu sterującego hamulcami przyczepy. Wyniki testu statystycznego Kołmogorowa-Smirnowa oceny zgodności doświadczalnych i symulowanych przebiegów czasowych ciśnienia podczas badania czasu reakcji obwodu sterującego ciągnika Pronar 1531A potwierdziły adekwatność opracowanego w Matlabie-Simulinku modelu komputerowego. Model komputerowy może być wykorzystany jako podsystem do analizy metodami symulacyjnymi procesów przejściowych w procesie projektowania powietrznych układów hamulcowych ciągników rolniczych.
Źródło:
Eksploatacja i Niezawodność; 2014, 16, 4; 637-643
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modern actuator
Autorzy:
Mielewczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/242423.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
main engine
control
controller
actuator
regulating valve
transducer
Opis:
The main engine of the ship is a complex technical object, which provides propulsion of the screw and ensures the safety of a ship at sea. It consists of a number of control systems such as lube oil temperature control, temperature control of the cooling water, fuel viscosity control or adjustable speed control of the main engine. Each of the main propulsion control system affects the safety of the ship. Continuous automation systems are built with standard transducer of measured quantity, the controller and actuator. The actuator is responsible for the direct setting of the size of the control object. The actuator is connected to the control valve and the actuator position change translates into a change in the flow rate of the working medium. Thus, the operating element is required to operate in the linear characteristics of the standard signal range. From the other hand, the control valve provides flow characteristics linear or of equal percentage. This control principle of medium flow is used in various control systems. The actuator of the control valve is always equipped with a positioner, which corrects errors in the position of the valve relative to the input signal. The presented design of the motorized valve is an analog system. Using the technique of converting multiple digital signal causes the system complexity and predisposition to damage. Eliminating the intermediate elements can improve the quality control and system safety. Then it is beneficial to have a design of the operating element based on the direct digital processing unit. The aim of paper has been to present design of the valve actuator, which completely abandons the digital-to-analogue convertor. The new design should increase the level of security of the system and quality control. The design layout is presented in the article. The new actuator is on-off valves, which control, directly from the digital bits, the form of the output signal. The control signal may use the control algorithms to be used or developed individually to the actuator design.
Źródło:
Journal of KONES; 2014, 21, 2; 221-226
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Realization of the Atkinson-Miller cycle in spark-ignition engine by means of the fully variable inlet valve control system
Autorzy:
Żmudka, Z.
Postrzednik, S.
Przybyła, G.
Powiązania:
https://bibliotekanauki.pl/articles/240220.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
spark-ignition engine
variable inlet valve control
open theoretical cycle
charge exchange process
silnik o zapłonie iskrowym
zawór
otwarty obieg teoretyczny
wymiana ładunku
Opis:
The theoretical analysis of the charge exchange process in a spark ignition engine has been presented. This process has significant impact on the effectiveness of engine operation because it is related to the necessity of overcoming the flow resistance, followed by the necessity of doing a work, so-called the charge exchange work. The flow resistance caused by the throttling valve is especially high during the part load operation. The open Atkinson-Miller cycle has been assumed as a model of processes taking place in the engine. Using fully variable inlet valve timing the A-M cycle can be realized according to two systems: system with late inlet valve closing and system with early inlet valve closing. The systems have been analysed individually and comparatively with the open Seiliger-Sabathe cycle which is a theoretical cycle for the classical throttle governing of the engine load. Benefits resulting from application of the systems with independent inlet valve control have been assessed on the basis of the selected parameters: fuel dose, cycle work, charge exchange work and a cycle efficiency. The use of the analysed systems to governing of the SI engine load will enable to eliminate a throttling valve from the system inlet and reduce the charge exchange work, especially within the range of part load operation.
Źródło:
Archives of Thermodynamics; 2014, 35, 3; 191-205
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stanowisko do wyznaczania charakterystyk statycznych i dynamicznych zaworów proporcjonalnych
Test stand for estimation of static and dynamic characteristic of proportional hydraulic valves
Autorzy:
Kudźma, Z.
Stosiak, M.
Herok, S.
Powiązania:
https://bibliotekanauki.pl/articles/276099.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
rozdzielacz proporcjonalny
sterowanie proporcjonalne
charakterystyki
przekładnia hydrostatyczna
badania
proportional directional control valve
proportional control
characteristics
hydrostatic transmission
research
Opis:
W artykule przedstawiono stanowisko do wyznaczania charakterystyk statycznych i dynamicznych zaworów sterowanych w technice proporcjonalnej. Opisano układ sterujący rozdzielaczem proporcjonalnym i wielokanałowy tor sterująco-pomiarowy ze specjalistycznym oprogramowaniem umożliwiającym generowanie dowolnego w czasie przebiegu sygnału sterującego oraz na akwizycję danych pomiarowych. Przedstawiono przykładowe wyniki wyznaczania charakterystyk proporcjonalnego rozdzielacza regulacyjnego najnowszej generacji. Zamieszczono przykład zastosowania uzyskanych wyników pomiarowych do uściślenia modelu matematycznego sterowania rozruchem przekładni hydrostatycznej pod kątem minimalizacji hałasu.
In the paper a test stand for determination of static and dynamic proportional valves characteristic was presented. A multichannel test stand was developed and presented in the paper. Moreover control system of proportional directional control valve and multichannel slotted line with special software for generation several control signals were presented too. Moreover some experimental tests results were presented for high-response proportional directional control valve. An example of application obtained results for mathematical model refinement of control of hydrostatic transmission start with minimum noise criterion was presented.
Źródło:
Pomiary Automatyka Robotyka; 2014, 18, 3; 112-119
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza efektywności niezależnego sterowania zaworami wylotowymi jako sposobu realizacji wewnętrznej recyrkulacji spalin
Analysis of effectiveness of independent exhaust valve control as a method of an internal EGR realization
Autorzy:
Żmudka, Z.
Postrzednik, S.
Przybyła, G.
Powiązania:
https://bibliotekanauki.pl/articles/132866.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
silnik spalinowy
otwarty obieg teoretyczny
wymiana ładunku
niezależne sterowanie zaworami wylotowymi
wewnętrzna recyrkulacja spalin
internal combustion engine
open theoretical cycle
charge exchange
independent exhaust valve control
internal exhaust gas recirculation
Opis:
Przeprowadzono analizę systemu z niezależnym, wcześniejszym zamknięciem zaworu wylotowego, który umożliwia realizację wewnętrznej recyrkulacji spalin oraz wyeliminowanie przepustnicy w silniku ZI. Odniesieniem dla oceny korzyści oraz badania efektywności pozyskiwania pracy, w wyniku zastosowania tego systemu sterowania, jest otwarty obieg teoretyczny Seiligera-Sabathe’a z powszechnie stosowaną klasyczną regulacją dławieniową obciążenia. Analizę porównawczą efektywności zastosowania zaproponowanego systemu przeprowadzono opierając się na wybranych wielkościach: dawce paliwa, pracy obiegu, względnej pracy wymiany ładunku oraz sprawności obiegu. Najlepsze efekty w zakresie zmniejszenia dawki paliwa i zwiększenia sprawności obiegu dla analizowanego systemu, w porównaniu do systemu z regulacją dławieniową, uzyskuje się w obszarze średniego obciążenia silnika.
A system with independent, early exhaust valve closing has been analysed. The analysed system enables realization of an internal EGR and elimination of a throttling valve from inlet system of a spark ignition engine. The open, theoretical cycle has been assumed as a model of processes proceeding in an engine. The system has been analysed individually and comparatively with open Seiliger-Sabathe cycle. Benefits resulting from application of the system with early exhaust valve closing have been assessed on the basis of the selected parameters: a fuel dose, a cycle work, a relative charge exchange work and a cycle efficiency. The best results within decrease of fuel consumption and increase of cycle efficiency are obtained for mean engine load.
Źródło:
Combustion Engines; 2013, 52, 3; 338-345
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies