Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "uśrednianie" wg kryterium: Temat


Tytuł:
A reliability evaluation study based on competing failures for aircraft engines
Badania dotyczące oceny niezawodności silników lotniczych w oparciu o uszkodzenia konkurujące
Autorzy:
Wang, H.
Gao, J.
Powiązania:
https://bibliotekanauki.pl/articles/300888.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
silnik lotniczy
ocena niezawodności
uszkodzenia konkurujące
bayesowskie uśrednianie modeli
fuzja danych
aircraft engine
reliability evaluation
competing failures
Bayesian model averaging
data fusion
Opis:
Aircraft engine is a complex and repairable system, and the diversity of its failure modes increases the difficulty of reliability evaluation. It is necessary to establish a dynamic relationship among data, failure mode and system reliability, to achieve the scientific reliability evaluation for aircraft engines. This paper has used data fusion method to establish reliability evaluation models respectively for performance degradation failures and sudden failures. Furthermore, these two models have been integrated on the basis of competing failures’ mechanism. Bayesian model averaging has been used to analyze the impacts of performance degradation failures and sudden failures on aircraft engines’ reliability. As a result of above, the goal of an accurate evaluation of the reliability for aircraft engines has been achieved. Example shows the effectiveness of the proposed model.
Silnik samolotu to złożony system naprawialny, w którym różnorodność przyczyn uszkodzeń zwiększa trudność oceny niezawodności. Dlatego też istnieje konieczność ustalenia dynamicznych związków pomiędzy danymi, przyczynami uszkodzenia i niezawodnością systemu, których znajomość pozwoliłaby przeprowadzać naukową ocenę niezawodności silników lotniczych. W prezentowanej pracy wykorzystano metodę fuzji danych do opracowania modeli oceny niezawodności w zakresie uszkodzeń wynikających z obniżenia charakterystyk oraz uszkodzeń nagłych. Ponadto, opracowane modele zintegrowano na podstawie mechanizmu uszkodzeń konkurujących. Do analizy wpływu dwóch omawianych typów uszkodzeń na niezawodność silników lotniczych wykorzystano procedurę bayesowskiego uśredniania modeli. Dzięki powyższym krokom, osiągnięto założony cel dokładnej oceny niezawodności silników samolotowych. Przykład pokazuje skuteczność proponowanego modelu.
Źródło:
Eksploatacja i Niezawodność; 2014, 16, 2; 171-178
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Algorytmy CAV i MAV filtracji sygnałów kwantowanych z ditherem
CAV and MAV algorithms of the filtration of signals quantized using dither
Autorzy:
Domańska, A.
Powiązania:
https://bibliotekanauki.pl/articles/154612.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
przetwornik A/C
dither
ruchoma średnia
uśrednianie metodą kumulacji
A/D converter
cumulating average
moving average
Opis:
Działania zmierzające do poprawy dokładności systemów pomiarowych z cyfrowym algorytmem pomiaru mają między innymi na celu poprawę dokładności konwersji analogowo-cyfrowej. Użyteczna okazala się metoda przetwarzania a-c z sygnałem ditherowym. Jej celem jest randomizacja błędu konwersji a-c i jego redukcja w wyniku filtracji. Filtracja może polegać na uśrednianiu wyników metodą kumulacji (cummulating average CAV także nazywane coherent averaging) albo na przetwarzaniu ich w filtrze typu "ruchoma średnia" (moving average MAV). W artykule przedstawino wyniki porównania skuteczności filtracji CAV i MAV w przypadku konwersji a-c sygnału periodycznego. Jako miarę skuteczności przyjęto wartość błędu operacji konwersji.
Actions leading to an improvement in the accuracy of measuring systems with digital measring algorithm are aimed, among others, at improving the accuracy of a-d conversion. One of the methods applied is a-d conversion with dither signal. Its aim is the randomization and reduction of a-d conversion error as the result of filtration. Filtration can consist in the averaging of results using the cummulating average CAV (called also coherent averaging), or in processing them in a filter of the moving average (MAV) type. The paper presents the results of comparing the efficiency of CAV and MAV filtration in the case of the a-d conversion of periodic signal. The value of the conversion errer was assurred as efficiency measure.
Źródło:
Pomiary Automatyka Kontrola; 2007, R. 53, nr 9 bis, 9 bis; 119-122
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analytical-numerical approach to analysis of large amplitude vibrations of slender periodic beams
Autorzy:
Domagalski, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/127691.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
nonlinear vibrations
periodic beams
averaging
tolerance modelling
drgania nieliniowe
belka o strukturze periodycznej
uśrednianie
modelowanie tolerancyjne
Opis:
The paper is devoted to analysis of geometrically nonlinear vibrations of beams with geometric and material properties periodically varying along the axis. The 1-D Euler-Bernoulli theory of beams with von Kármán nonlinearity is applied. An analytical-numerical model based on non-asymptotic tolerance modelling approach and Galerkin method is applied. The linear natural frequencies and mode shapes are determined and the results are confirmed by comparison with a finite element model. Forced damped vibrations analysis in the large deflection range is performed to illustrate complex behaviour of the system.
Źródło:
Vibrations in Physical Systems; 2016, 27; 99-106
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Averaging of the vibration signal with the synchronizing impulse location correction in tooth gear diagnostics
Wykorzystanie uśredniania sygnału drganiowego z korekcją położenia impulsu synchronizującego w diagnostyce przekładni zębatych
Autorzy:
Wojnar, G.
Łazarz, B.
Powiązania:
https://bibliotekanauki.pl/articles/329182.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
przekładnia zębata
uśrednianie synchroniczne
estymacja opóźnienia czasowego
diagnostyka
signal averaging
time-delay estimation
diagnostic
toothed gear
Opis:
One of the methods applied to detect pinion or gear wheel damage is an analysis of a signal synchronously averaged by the rotation period of a pinion shaft or gear shaft, respectively. For technical reasons, it is often impossible to record the reference signal directly connected with the diagnosed wheel in industrial conditions. The signal is then connected with a rotating element available outside the gear. As a result of torsional vibration in a system of shafts or gear casing vibration in a place where the shaft's angular position sensor is fixed, or in consequence of a too slowly rising reference signal edge, a synchronizing impulse occurs at wheel's angular positions varying by an insignificant value. This paper presents the usefulness of time-delay estimation methods in the process of vibration signals' synchronous averaging.
Jednym ze sposobów wykrywania uszkodzeń zębnika lub koła jest analiza sygnału uśrednionego synchronicznie odpowiednio okresem obrotu wału zębnika lub koła. W warunkach przemysłowych ze względów technicznych często nie jest możliwe rejestrowanie sygnału odniesienia związanego bezpośrednio z diagnozowanym kołem. Wtedy sygnał ten wiąże się z dostępnym na zewnątrz przekładni elementem wirującym. Na skutek drgań skrętnych w układzie wałów, drgań korpusu przekładni w miejscu mocowania czujnika położenia kątowego wału i często zbyt wolno narastającego zbocza sygnału referencyjnego impuls synchronizujący występuje przy położeniach kątowych koła różniących się o niewielką wartość. W niniejszym artykule przedstawiono przydatność metod estymacji przesunięcia czasowego w procesie uśredniania synchronicznego sygnałów drganiowych.
Źródło:
Diagnostyka; 2007, 4(44); 19-24
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie dokładności estymacji odpowiedzi impulsowej wykorzystującej warunkowe uśrednianie sygnałów
Accuracy investigations of impulse response estimation obtained by conditional averaging
Autorzy:
Szlachta, A.
Kowalczyk, A.
Wilk, B.
Powiązania:
https://bibliotekanauki.pl/articles/151225.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
warunkowe uśrednianie sygnałów
odpowiedź impulsowa
niepewność estymatora
conditional signal averaging
impulse response
estimator uncertainty
Opis:
Przedstawiono wyniki wybranych badań teoretycznych i eksperymentalnych metody wyznaczania odpowiedzi impulsowej wykorzystującej warunkowe uśrednianie sygnałów. Omówiono wpływ progu inicjującego uśrednianie, pasma częstotliwości testowego szumu białego, skorelowania sygnałów i liczby uśrednionych realizacji na dokładność estymacji odpowiedzi impulsowej.
Determination of the linear system impulse response is presented in the paper. The white noise of normal distribution N(0, δx) and the band limited to low frequencies has been applied as a test signal. The cross conditional averaging of the input and output signal has been performed. The paper describes a method for estimating the impulse response based on conditional averaging. The results of theoretical and practical investigations are given. The influence of the threshold xp, the frequency band of the test noise signal and the number of averaging M have been considered. The results of algorithm testing with theoretical and practical signals are shown. At the first stage of investigations impulse responses of two systems have been obtained. The parameters of those systems have been known. The signals x(t), y(t) and theirs characteristics for identification of first order instruments are presented in Figs. 3 and 4. The conditional averaging can also be used for identification of a time delay. The algorithms of conditional averaging have been elaborated and practically realized in the LabVIEW environment.
Źródło:
Pomiary Automatyka Kontrola; 2009, R. 55, nr 12, 12; 981-984
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bayesowskie uśrednianie klasycznych oszacowań w prognozowaniu wskaźników makroekonomicznych z użyciem danych z testów koniunktury
Bayesian Averaging of Classical Estimates in Forecasting Macroeconomic Indicators with Using Business Survey Data
Autorzy:
Białowolski, Piotr
Kuszewski, Tomasz
Witkowski, Bartosz
Powiązania:
https://bibliotekanauki.pl/articles/500092.pdf
Data publikacji:
2013-02-01
Wydawca:
Szkoła Główna Handlowa w Warszawie
Tematy:
bayesowskie uśrednianie klasycznych oszacowań
wyniki testów koniunktury
sezonowość
zautomatyzowane prognozowanie
bayesian averaging of classical estimates
survey data
seasonality
automatized forecasting
Opis:
W niniejszej pracy przedstawiono kolejną wersję modelu dla prognozowania podstawowych wskaźników makroekonomicznych z wykorzystaniem danych z testów koniunktury. W pracach Białowolskiego, Kuszewskiego i Witkowskiego (2010a, 2010b, 2011, 2012a, 2012b) rozwijano metodykę budowy modeli dla prognozowania tempa zmian produktu krajowego brutto, stopy bezrobocia i wskaźnika cen towarów konsumpcyjnych. W zbiorze regresorów tych modeli, oprócz opóźnionych w czasie zmiennych endogenicznych, uwzględnia się wyłącznie wyniki różnych testów koniunktury. Badanie dotyczy specyfikacji modelu prognostycznego metodą bayesowskiego uśredniania klasycznych oszacowań (Bayesian averaging of classical estimates, BACE). Przyjęte rozwiązanie umożliwia automatyzację proces doboru postaci modelu. W kolejnym etapie postępowania jest rozważany wpływ sezonowości deterministycznej i stochastycznej szeregów czasowych na wynik procesu prognozowania. Zaproponowano intuicyjną procedurę uwzględniania obu rodzajów sezonowości w procesie prognozowania. Po zakończeniu procesu estymacji i doboru modeli weryfikowano ich możliwości prognostyczne.
This paper presents another version of model designed to forecast main macroeconomic indicators with the use of economic survey data. In previous papers (Białowolski, Kuszewski, Witkowski, 2010a, 2010b, 2011, 2012a, 2012b) methods for developing models used for forecasting GDP growth rate, unemployment rate and CPI were proposed. The set of regressors in those models included only lagged dependent variables and indices based on various survey data. In this paper the specification of the forecasting model is selected with the use of Bayesian averaging of classical estimates (BACE). This algorithm enables an automatic process of selection of functional form of the model. Next the influence of deterministic and stochastic seasonality in time series on forecasting process is concerned. An intuitive procedure of applying and selecting among both types of seasonality in the forecasting process is discussed. Afterwards their forecasting capabilities are considered.
Źródło:
Prace i Materiały Instytutu Rozwoju Gospodarczego SGH; 2013, 91: Badania koniunktury - zwierciadło gospodarki. Część II; 121-144
0866-9503
Pojawia się w:
Prace i Materiały Instytutu Rozwoju Gospodarczego SGH
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Boundary effect behavior in the hexagonal-type biperiodic structures with rotational symmetry
Autorzy:
Mazewska, M.
Kula, D.
Wierzbicki, E.
Powiązania:
https://bibliotekanauki.pl/articles/122943.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
tolerance averaging
heat conduction
biperiodic conductors
boundary effect
tolerancyjne uśrednianie
przewodzenie ciepła
efekty brzegowe
Opis:
The report presents a study of the thermal boundary effect behaviour in the hexagonal-type rigid conductors. Every hexagonal cell of the conductor is made of three rhombus parts. Some special cases of a considered conductor with rhombus parts built of two layers of different isotropic material are analyzed. The tolerance averaging approach is used as a tool of modeling. The most important result of the paper is specification of parameters which determine the character and the intensity of the boundary effect behavior. Introduced in the contribution the boundary effect intensity parameter is suggested to be treated as a certain measure of the intensity of boundary effect behavior.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2014, 13, 2; 73-85
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Data partitioning based weighted averaging for noise suppression in biomedical signals
Autorzy:
Momot, A.
Jezewski, J.
Wrobel, J.
Powiązania:
https://bibliotekanauki.pl/articles/951703.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
ważone uśrednianie
tłumienie hałasu
weighted averaging
noise attenuation
quasi-cyclic biomedical signal
Opis:
In the case of biomedical signals with a quasi-cyclic character, such as electrocardiographic signals, the high resolution electrocardiograms or electrical potentials recorded from the nervous system of patients (estimating brain activity evoked by a known stimulus), as a method of averaging in the time domain may be used for noise attenuation. In this paper there is presented input data partitioning applied to a few different methods of weighted averaging. This procedure usually leads to improve the quality of the resulting averaged signal, especially when fuzzy partitioning is used. Below it is presented the computational study of weighted averaging with traditional (sharp) and fuzzy partition of the input data in the presence of non-stationary noise. The performance of presented methods is experimentally evaluated for analytical signal of EN 60601-2-51 (2003), namely ANE20000 ECG record.
Źródło:
Journal of Medical Informatics & Technologies; 2012, 20; 85-91
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Degradation modeling method for rotary lip seal based on failure mechanism analysis and stochastic process
Metoda modelowania degradacji obrotowego uszczelnienia wargowego w oparciu o analizę mechanizmu uszkodzenia i proces stochastyczny
Autorzy:
Liu, Di
Wang, Shaoping
Tomovic, Mileta M.
Powiązania:
https://bibliotekanauki.pl/articles/1841853.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
rotary lip seal
failure mechanism analysiss
stochastic process
degradation modeling
Bayesian model averaging
obrotowe uszczelnienie wargowe
mechanizm uszkodzenia
proces stochastyczny
modelowanie degradacji
bayesowskie uśrednianie modeli
Opis:
Rotary lip seal is widely used in aircraft and its performance affects the safety of the aircraft. Hence, it is necessary to estimate useful lifetime and reliability of the seal. Degradation of rotary lip seal is always with random effects, which cannot be considered by theoretical failure mechanism analysis. Hence, in order to consider the random effects of rotary lip seal degradation, stochastic processes are applied. Furthermore, considering the monotonic degradation of the seal, Gamma process and inverse Gaussian process are selected as the candidate processes. To combine the candidate processes, Bayesian model averaging is introduced. Based on the failure mechanism analysis and numerical simulation, the theoretical wear path is predicted and corresponding linearization method is proposed. The measured degradation data is converted and the seal wear process is transformed to a linear degradation process. The model parameters and model probabilities are evaluated by fully Bayesian inference method. The effectiveness of the proposed method is verified by comparing the predicting degradation and experimental observations. The proposed method can be used to evaluate reliability and useful lifetime of rotary lip seal. According to sensitivity analysis, an effective way to improve lifetime and reliability of the seal is to increase the wear depth threshold.
Obrotowe uszczelnienia wargowe znajdują szerokie zastosowanie w samolotach, a ich sprawność wpływa na bezpieczeństwo statków powietrznych. Oznacza to, iż szacowanie żywotności i niezawodności tego rodzaju uszczelnień ma kluczowe znaczenie. Degradacja obrotowego uszczelnienia wargowego jest zawsze związana z efektami losowymi, których nie uwzględnia teoretyczna analiza mechanizmu uszkodzenia. Dlatego też do oceny efektów losowych degradacji obrotowego uszczelnienia wargowego wykorzystuje się procesy stochastyczne, takie jak proces Gamma czy odwrotny proces Gaussa. W przedstawionej pracy, wybrane procesy degradacji łączono za pomocą metody bayesowskiego uśredniania modeli. Na podstawie analizy mechanizmów uszkodzeń i symulacji numerycznej, konwertowano uzyskane w pomiarach dane degradacyjne, co pozwoliło na przekształcenie procesu degradacji obrotowego uszczelnienia wargowego w proces liniowy. Parametry modelu i prawdopodobieństwa oceniano za pomocą metody pełnego wnioskowania bayesowskiego na podstawie obserwacji degradacji. Skuteczność przedstawionej metody weryfikowano porównując przewidywane i obserwowane wartości degradacji. Proponowaną metodę można wykorzystywać do oceny niezawodności i żywotności obrotowego uszczelnienia wargowego. Przeprowadzona analiza czułości pokazuje, że skutecznym sposobem na poprawę żywotności i niezawodności omawianego typu uszczelnienia jest zwiększenie progu uszkodzenia w postaci maksymalnej głębokości zużycia.
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 3; 381-390
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determinants of Foreign Direct Investments in the Visegrad Group Countries
Determinanty bezpośrednich inwestycji zagranicznych w krajach Grupy Wyszehradzkiej
Autorzy:
Wojciechowski, Liwiusz
Makieła, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/657106.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
bezpośrednie inwestycje zagraniczne
Grupa Wyszehradzka
bayesowskie uśrednianie modeli
Foreign Direct Investment
Visegrad countries
Bayesian model averaging
Opis:
Celem niniejszego artykułu jest określenie determinant akumulacji zagranicznych inwestycji bezpośrednich (FDI) w krajach Grupy Wyszehradzkiej. Teoria zakłada, że FDI jest motywowana głównie chęcią pozyskiwania rynku i poprawy efektywności gospodarowania. Ponieważ zagraniczni inwestorzy szukają sprawnego i relatywnie taniego środowiska biznesowego, można przyjąć założenie, że produktywność jest jednym z kluczowych czynników przyciągających inwestycje zagraniczne. W celu weryfikacji takiego założenia sformułowano model bazujący na systemie dwóch równań: pierwszego dla produkcji, szacującego produktywność, oraz drugiego dla FDI, mającego na celu przeanalizowanie wpływu produktywności na FDI. Aby sprawdzić rzetelność badanej interakcji, wzięto również pod uwagę czynniki makroekonomiczne i instytucjonalne. Badanie przeprowadzono na 13 sektorach przemysłowych NACE w krajach V4 w latach 2004-2013. Wyniki wskazują na istotny związek między FDI i produktywnością, jak również na to, że rozmiar rynku, jakość (i ilość) siły roboczej, wydatki na B+R oraz zmiany cen w czasie są istotnymi determinantami FDI na poziomie przemysłu.
The purpose of this paper is to investigate determinants of foreign direct investments (FDI) in the Visegrad Group countries. The theory indicates that FDI are mainly driven by market and efficiency seeking motives. Foreign investors are looking for a productive and relatively low‑cost business environment, which leads us to the assumption that productivity is one of key drivers of foreign capital. In order to verify this, we formulate a model based on a system of two equations: one for production to capture productivity and one for FDI to assess the influence of productivity on FDI. For robustness check, a number of macroeconomic and institutional factors are also considered. The study is conducted using a panel of 13 NACE industry sectors of the Visegrad Group countries in 2004-2013. The results indicate a positive, significant relationship between FDI and productivity as well as that market size, labour quality (and quantity), R&D expenditures and price changes over time are relevant FDI determinants at an industry level.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2019, 4, 343; 103-121
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Filtering of two-dimensional digital images using weighted averaging for adaptive selection of weights
Autorzy:
Momot, A.
Wrobel, J.
Horoba, K.
Jeżewski, M.
Bernys, M.
Powiązania:
https://bibliotekanauki.pl/articles/951702.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
filtracja obrazów
ważone uśrednianie
image filtering
weighted averaging
adaptive selection of weights
Opis:
Many digital images, especially in biomedical fields, contain some disturbances. The image analysis depends on quality of the images that is why reduction or elimination (if it is possible) the disturbances is the key issue. There are many methods of improvement in the quality of the images and thus improve the quality of the image analysis, among them one of the simplest method is low-pass filtering such as arithmetic mean or its generalization, weighted mean. The basic problem of the weighted mean is the proper selection of the weights. This can be done using adaptive algorithms. This paper presents several such algorithms which are modifications of the existing weighted averaging methods created originally for noise reduction in electrocardiographic signal. The description of the new filtering methods and a few results of its application are also presented with comparison to existing arithmetic average filtering.
Źródło:
Journal of Medical Informatics & Technologies; 2012, 20; 93-99
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of mechanical and electromagnetic phenomena on electric motor vibrations in different power supply options
Autorzy:
Wróbel, Mateusz
Barczewski, Roman
Jakubek, Bartosz
Rukat, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/2146620.pdf
Data publikacji:
2020
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
electric motor
vibration
supply
star
single-phase
inverter
multi-synchronous averaging
silnik elektryczny
drgania
zasilanie
gwiazda
zasilanie jednofazowe
falownik
uśrednianie multisynchroniczne
Opis:
Results of research about influence of mechanical and electromagnetic phenomena on electric motor vibration in different supply options has been shown in this paper. Three different supply options have been taken under consideration: typical star connection, single-phase connection with work capacitor and connection through an inverter. Vibration signals recorded on electric motor end shield and frame has been digitally processed using Multi-Synchronous Averaging (MSA). This technique allowed to decompose total vibration signal into signals associated with mechanical and electromagnetic phenomena occurring in electric motor. The comparison of rms values and spectra shapes of total and decomposed vibration signals has been made. Energy shares of previously mentioned phenomena in vibration signal for different supply options has been also estimated.
Źródło:
Vibrations in Physical Systems; 2020, 31, 1; art. no. 2020102
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Klasyczna metoda wyznaczania właściwości dynamicznych systemów liniowych z wykorzystaniem warunkowego uśredniania sygnałów
Classical method for determination of linear system dynamic properties using signal conditional averaging
Autorzy:
Kowalczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/158372.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
szum biały z rozkładem normalnym
warunkowe uśrednianie sygnałów
odpowiedź impulsowa
white noise of normal distribution
conditional signal averaging
impulse response
Opis:
W artykule przedstawiono metodę wyznaczania odpowiedzi impulsowej systemu liniowego. Zastosowano jako sygnał testowy szum biały o rozkładzie normalnym i wykorzystano warunkowe uśrednianie sygnału wyjściowego i wejściowego.
The method for determination of the linear system impulse response is presented in the paper. The white noise of normal distribution and the band limited to low frequencies has been applied as a test signal. The cross conditional averaging of the input and output signal has been used in the method.
Źródło:
Pomiary Automatyka Kontrola; 2008, R. 54, nr 12, 12; 820-823
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method comparison of statistical averaging on the Helmholtz coils calibration example
Porównanie metod uśredniania statystycznego na przykładzie wzorcowania cewek Helmholtza
Autorzy:
Janeczko, M.
Powiązania:
https://bibliotekanauki.pl/articles/407984.pdf
Data publikacji:
2016
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
calibration of Helmholtz coils
statistical averaging
Monte Carlo method
wzorcowanie cewek Helmholtza
uśrednianie statystyczne
metoda Monte Carlo
Opis:
During a calibration of Helmholtz coils, in which more than one parameter is measured directly, there are various approaches to statistical averaging. In this paper will be discussed two of them: the averaging at the beginning of directly measured magnitude and the averaging of the final value. In order to compare the methods they will be referenced to the Monte Carlo method, having regard to the uncertainty of type A.
Podczas wzorcowania cewek Helmholtza podczas których mierzy się bezpośrednio więcej niż jeden parametr możliwe są różne podejścia do uśredniania statystycznego. W pracy omówione będą dwa z nich: uśrednianie na początku bezpośrednio zmierzonych wielkości oraz uśrednianie wielkości końcowej. W celu porównania metod zostaną one odniesione do Metody Monte Carlo z uwzględnieniem niepewności typu A.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2016, 3; 24-27
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda pomiaru prędkości obiektu z wykorzystaniem warunkowego uśredniania wartości bezwzględnej sygnału stochastycznego
A method of speed measurement using conditional averaging of the stochastic signal absolute value
Autorzy:
Kowalczyk, A.
Szlachta, A.
Wilk, G.
Powiązania:
https://bibliotekanauki.pl/articles/151227.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sygnał stochastyczny
uśrednianie warunkowe
pomiar prędkości
testowy algorytm pomiaru
stochastic signal
conditional averaging
velocity measurement
measurement testing algorithm
Opis:
Scharakteryzowano trudności w praktycznych zastosowaniach dwóch metod pomiaru prędkości z wykorzystaniem statystycznego przetwarzania sygnału losowego: autokorelacji i bazującej na widmie sygnału. Zaproponowano nową metodę wykorzystującą warunkową wartość średnią modułu sygnału losowego i testowy algorytm pomiaru na właściwości, której nie mają wpływu zmiany cech statystycznych poruszającego się obiektu. Przedstawiono podstawowe zależności teoretyczne opisujące proponowane modele pomiaru oraz wybrane wyniki badań eksperymentalnych.
The paper presents a method using statistical methods for velocity measurements for industrial purposes. There are described the properties of statistical methods in which velocity measurements are based on one random signal. A brief outline of difficulties related to practical applications of autocorrelation and spectral methods is additionally included. They are the conditions for the stationarity of a measurement signal and the repeatability of the shape of its statistical characteristics for each programmed velocity (for full scale of an apparatus) which have to be fulfilled. These difficulties can be overcome by the proposed method which uses the conditional average value of module (CAAV) of a sensor random signal and a measurement testing algorithm. Then the measurement characteristics are not affected by changes in statistical features of the moving object signal. The discussion of the theoretical relationships describing the measurement method as well as the results of practical tests are included. In these tests there were used the models of pseudo-random sensor signals with programmed statistical characteristics.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 12, 12; 1239-1241
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies