Temat: trimaran - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Hydrodynamic Analysis of Trimaran Vessels
Autorzy:: Javanmardi, M. R.
Jahanbakhsh, E.
Seif, M. S.
Sayyaadi, H.
Powiązania:: https://bibliotekanauki.pl/articles/258654.pdf
Data publikacji:: 2008
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: trimaran
resistance
maneuvering
computational fluid dynamics (CFD)
Opis:: Trimaran vessels are developed for different applications and hydrodynamic behavior of such vessels is different than usual mono-hulls. In this paper hydrodynamic resistance and maneuvering of a trimaran with Wigley body form are investigated. The effects of outriggers position in four different longitudinal and two transverse locations are studied. For hydrodynamic simulations a CFD code has been developed and used. This code is capable for simulating three dimensional, time dependent, two phases, viscous flow coupled with rigid body motion. Formulation and solution algorithm are described in detail. Different case studies have been performance and numerical results have shown good agreement with experimental data. Based on resistance and maneuvering simulation of the trimaran vessels different conclusion are made. The results show that positions of outriggers have great effect on resistance and maneuverability of trimaran. The present method can be further employed to investigate other hydrodynamic qualities of trimaran vessels.
Źródło:: Polish Maritime Research; 2008, 1; 11-18
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Numerical and experimental study on seakeeping performance of a high-speed trimaran with T-foil in head waves
Autorzy:: Li, Ang
Li, Yunbo
Powiązania:: https://bibliotekanauki.pl/articles/258842.pdf
Data publikacji:: 2019
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: trimaran
T-foil
URANS
longitudinal motion
model test
Opis:: The longitudinal motion characteristics of a slender trimaran equipped with and without a T-foil near the bow are investigated by experimental and numerical methods. Computational fluid dynamics ( CFD) method is used in this study. The seakeeping characteristics such as heave, pitch and vertical acceleration in head regular waves are analyzed in various wave conditions. Numerical simulations have been validated by comparisons with experimental tests. The influence of large wave amplitudes and size of T-foil on the longitudinal motion of trimaran are analyzed. The present systematic study demonstrates that the numerical results are in a reasonable agreement with the experimental data. The research implied that the longitudinal motion response values are greatly reduced with the use of T-foil.
Źródło:: Polish Maritime Research; 2019, 3; 65-77
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Test studies of the resistance and seakeeping performance of a trimaran planing hull
Autorzy:: Ma, W.
Sun, H.
Zou, J.
Zhuang, J.
Powiązania:: https://bibliotekanauki.pl/articles/259495.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: trimaran planing hull
appendix
resistance
seakeeping
model test
Opis:: Towing tank tests in calm water were performed on a trimaran planing hull to verify its navigational properties with different displacements and centres of gravity, as well as to assess the effects of air jets and bilge keels on the hull’s planing capabilities, and to increase the longitudinal stability of the hull. Hydrostatic roll tests, zero speed tests, and sea trials in the presence of regular waves were conducted to investigate the hull’s seakeeping ability. The test results indicate that the influence of the location of the centre of gravity on the hull resistance is similar to that of a normal trimaran planing hull; namely, moving the centre of gravity backward will reduce the resistance but lower the stability. Bilge keels improve the longitudinal stability but slightly affect the resistance, and the presence of air jets in the hull’s channels decreases the trim angle and increases heaving but has little effect on the resistance. Frequent small-angle rolling occurs in waves. The heaving and pitching motions peak at the encounter frequency of , and the peaks increase with velocity and move towards greater encounter frequencies. When the encounter frequency exceeds, the hull motion decreases, which leads to changes in the navigation speed and frequency.
Źródło:: Polish Maritime Research; 2015, 1; 22-27
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The research on characteristic parameters and resistance chart of operation and maintenance trimaran in the sea
Autorzy:: Chen, Y.
Yang, L.
Xie, Y.
Yu, S.
Powiązania:: https://bibliotekanauki.pl/articles/258516.pdf
Data publikacji:: 2016
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: wind power maintenance
trimaran
characteristic parameter
CFD
resistance charts
Opis:: The paper determined the volume ratio of the main hull and side hull and their position characteristic parameter of operation and maintenance trimaran. Numerical simulation technology was used to do the analysis and calculation of trimarans which have different volume ratio of the main and side hull, and on this basis, the paper tried different positions of main and side hull, finally got the trimaran with optimum resistance performance and the chart of trimaran resistance estimation, so as to provide a new way in the selection of feature parameter of offshore wind farm maintenance trimaran and its resistance estimation.
Źródło:: Polish Maritime Research; 2016, S 1; 20-24
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Test research on the resistance performance of high-speed trimaran planing hull
Autorzy:: Ma, W.
Sun, H.
Zou, J.
Yang, H.
Powiązania:: https://bibliotekanauki.pl/articles/259708.pdf
Data publikacji:: 2013
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: trimaran planing hull
side hulls
high speed
step
resistance
model test
Opis:: In order to identify high-speed navigation ability of trimaran planing hull, as well as investigate the characteristics of its resistance and hull form, ship model tests were conducted to measure resistance, trim and heaving under different displacements and gravity centre locations. The test results were then used to study the influence of spray strips on resistance and sea-keeping qualities. Moreover, different planning surfaces were compared in the model tests which helped to look into influence of steps on hull resistance and its moving position. Also, the resistance features of monohull and trimaran planing hulls, both with and without steps, were compared to each other. From the tests it can be concluded that: the two auxiliary side hulls increase aerodynamic lift at high-speed motion, which improves the hydrodynamic performance; the trimaran planing hull has also excellent longitudinal stability and low wave-making action; when Fr∇> 8, its motion is still stable and two distinct resistance peaks and two changes of sailing state (the second change is smaller) appear; spray strips are favourable for sea-keeping qualities at high speed. The change trends before the second resistance peak as to the resistance and sailing behaviour of trimaran planing hull without steps are the same as for monohull planing hull without steps. but when steps in both hulls exist the change trends are different; more specifically: trimaran planing hull with steps has only one resistance peak and its resistance increases along with its speed increasing, and the resistance is improved at the increasing speed as the number of steps increases.
Źródło:: Polish Maritime Research; 2013, 4; 45-51
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Numerical simulation of the seakeeping of a military trimaran hull by a novel overset mesh method in regular and irregular waves
Autorzy:: Ghadimi, Parviz
Karami, Saeid
Nazemian, Amin
Powiązania:: https://bibliotekanauki.pl/articles/1818907.pdf
Data publikacji:: 2021
Wydawca:: Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:: trimaran
hydrodynamic performance
seakeeping
overset mesh
numerical simulation
regular and irregular waves
Opis:: The hydrodynamic performance of trimaran hulls has been previously investigated for optimum performance in calm water, but there is still a limited understanding of its motion response; therefore, a CFD-based numerical approach was developed and applied on a trimaran hull in the presence of regular and irregular waves. To validate the CFD method, a comparison was conducted using both experimental and 3D panel method data. In this study, two different turbulence models were surveyed, and the SST Menter k-Omega (k-ω) turbulence model was shown to be a more accurate model than the realizable k-Epsilon (k-ε) model. The different features of the proposed numerical model include the implementation of an overset mesh method, unique mesh plan refinement, and wave-damping region. The discrepancy between the experimental data and the results of other seakeeping calculation methods have always been problematic, especially for low-speed strip theory and 3D panel methods, but good consistency was observed between the proposed CFD model and experimental data. Unlike potential-based or conformal mapping seakeeping analysis methods, the effect of nonlinear waves, hull shape above the waterline, and other ship dynamic phenomena were considered in this CFD application. The proposed CFD method reduces the simulation time and computational efforts for ship motion calculations.
Źródło:: Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2021, 65 (137); 38-50
1733-8670
2392-0378
Pojawia się w:: Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: A practical approach to the assessment of waterjet propulsion performance: the case of a waterjet-propelled trimaran
Autorzy:: Zhang, Lei
Zhang, Jia-ning
Shang, Yu-chen
Dong, Guo-xiang
Chen, Wei-min
Powiązania:: https://bibliotekanauki.pl/articles/963425.pdf
Data publikacji:: 2019
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: waterjet propulsion thrust
pressure jump method
boundary element method
trimaran
negative thrust deduction
Opis:: To obtain a reasonable evaluation of the performance of waterjet propulsion at the design stage, a semi-theoretical and semi-empirical method is used to calculate the fundamental parameters of waterjet propulsion performance using an iterative approach. To calculate the ship’s resistance, a boundary element method based on three-dimensional potential flow theory is used to solve the wave-making resistance, and an empirical approach is used to evaluate the viscous resistance. Finally, the velocity and pressure of the capture area of the waterjet propulsion control volume are solved based on turbulent boundary layer theory. The iteration equation is established based on the waterjet-hull force-balance equation, and the change in the ship’s attitude and the local loss of the intake duct are considered. The performance parameters of waterjet propulsion, such as resistance, waterjet thrust, thrust deduction, and the physical quantity of the control volume, are solved by iteration. In addition, a PID-controlled free-running ship model is simulated using the RANS CFD method as a comparison. We apply the proposed approach and the RANS CFD method to a waterjetpropelled trimaran model, and the simulation process and the results are presented and discussed. Although there are some differences between the two methods in terms of the local pressure distribution and thrust deduction, the relative error in the evaluation results for the waterjet propulsion performance is generally reasonable and acceptable. This indicates that the present method can be used at the early stages of ship design without partial information about the waterjet propulsion system, and especially in the absence of a physical model of the pump.
Źródło:: Polish Maritime Research; 2019, 4; 27-38
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki