Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "transition time" wg kryterium: Temat


Tytuł:
The application of Greenberg’s Model Modification for Estimating the Evacuation Time of People from Public Utility Buildings
Zastosowanie modyfikacji modelu Greenberga do szacowania czasu ewakuacji ludzi z budynków użyteczności publicznej
Autorzy:
Orłowska, Iwona
Dziubiński, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2060846.pdf
Data publikacji:
2019
Wydawca:
Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im. Józefa Tuliszkowskiego
Tematy:
experiment
evacuation
transition time
evacuation time
eksperyment
ewakuacja
czas przejścia
czas ewakuacji
Opis:
Objective: The article presents a proposition of a model for estimating people’s evacuation time from public utility buildings of category ZL III (not containing rooms designed for the simultaneous presence of more than 50 people who are not their regular users, not primarily intended for use by people with limited mobility). The model is based on the analogy between the theory of road traffic and the process of people’s movement during evacuation. Design and methods: In order to develop the model, a series of trial evacuations of people from public utility category ZL III buildings of varied geometry and number of users was conducted. A comparative analysis was performed concerning the evacuation times calculated with the use of models available in literature – a critical model of evacuation time, models designed by Togawa, Melenik and Booth, Galbreath, Pauls, methodology of the British Standard, and those derived from computer simulations performed with the use of the Pathfinder software. Based on the analysis of the conducted research and model considerations, an equation for the estimation of evacuation time was proposed based on a modified Greenberg’s equation derived from the road traffic theory. In the model modification, the concept of replacement length of evacuation route elements was applied, significantly slowing down people’s movement velocity, and a method for calculating them was proposed. Results: The evacuation times obtained in experimental research were compared to the model time values calculated from the models published in literature. A considerable dispersion of the achieved results was shown, ranging from –65.0% to +425.8% with respect to the evacuation times obtained experimentally. The performance of computer simulations brought evacuation times with a bias ranging from –54.4% to +26.0% with respect to the experiments conducted. Evacuation times calculated with the use of the proposed equation were in line with the experimental results with an error ranging from –12.3% to +13.8%. However, in comparison to the times obtained from additional computer simulations, representing the description of evacuation from buildings with highly varied geometry and various numbers of evacuees, the deviation of the calculated evacuation time from the proposed model was from –16.7% to +23.1%. In the vast majority of cases, the deviation of the result oscillated around ± 15% for a wide range of buildings’ geometry and the number of evacuees. Conclusions: The proposed model makes it possible to determine with sufficient accuracy the evacuation time of people from public utility buildings of category ZL III and can serve as a reliable source of comparative information.
Cel: Artykuł przedstawia propozycję modelu szacowania czasu ewakuacji ludzi z budynków użyteczności publicznej ZL III (niezawierających pomieszczeń zaprojektowanych do jednoczesnego przebywania ponad 50 osób niebędących ich stałymi użytkownikami oraz nieprzeznaczonych w szczególności do użytku przez ludzi o ograniczonej zdolności poruszania się). Zaproponowany model bazuje na analogii między teorią ruchu drogowego a procesem przemieszczania się ludzi w trakcie ewakuacji. Projekt i metody: Przeprowadzono szereg próbnych ewakuacji ludzi z budynków użyteczności publicznej ZL III o różnej geometrii i liczbie użytkowników. Dokonano analizy porównawczej czasów ewakuacji obliczonych za pomocą dostępnych w literaturze modeli – modelu krytycznego czasu ewakuacji, Togawy, Melenika i Bootha, Galbreatha, Paulsa, metodyki British Standard oraz otrzymanych z symulacji komputerowych wykonanych za pomocą programu Pathfinder. Na podstawie analizy wykonanych badań oraz przeprowadzonych rozważań modelowych zaproponowano równanie szacowania czasu ewakuacji oparte na modyfikacji równania Greenberga wynikającego z teorii ruchu drogowego. W modyfikacji modelu zastosowano koncepcję długości zastępczej elementów dróg ewakuacyjnych znacząco spowalniających prędkość poruszania się ludzi i zaproponowano metodę ich obliczania. Wyniki: Porównano uzyskane w badaniach eksperymentalnych czasy ewakuacji z modelowymi wartościami czasów obliczonymi z opublikowanych w literaturze modeli. Wykazano, duży rozrzut otrzymanych wyników wynoszący od –65,0% aż do +425,8% w stosunku do uzyskanych eksperymentalnie czasów ewakuacji. Wykonując symulację komputerową, uzyskano czasy ewakuacji obarczone błędem od –54,4% do +26,0% w stosunku do przeprowadzonych eksperymentów. Obliczone czasy ewakuacji za pomocą zaproponowanego równania zgadzały się z wynikami eksperymentalnymi z błędem od –12,3% do +13,8%. Natomiast w porównaniu z czasami uzyskanymi z dodatkowych symulacji komputerowych, reprezentujących opis ewakuacji z budynków o bardzo różnej geometrii i różnej liczbie ewakuujących się ludzi, odchylenie wyniku obliczanego czasu ewakuacji z zaproponowanego modelu wyniosło od –16,7% do +23,1%. W zdecydowanej większości przypadków odchylenie wyniku oscylowało w granicach około ±15% dla szerokiej gamy geometrii budynków oraz różnej liczby ewakuujących się osób. Conclusions: Zaproponowany model pozwala na wyznaczenie z zadowalającą dokładnością czasu ewakuacji ludzi z budynków użyteczności publicznej ZL III i może stanowić wiarygodne źródło informacji porównawczych.
Źródło:
Safety and Fire Technology; 2019, 53, 1; 88--105
2657-8808
2658-0810
Pojawia się w:
Safety and Fire Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of gas migration test and building structural strength of slurry in the aspect of limiting gas invasion
Autorzy:
Kremieniewski, M.
Rzepka, M.
Stryczek, S.
Wiśniowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/298587.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
gas migration
structural strength
cement slurry
hardened cement slurry
transition period
transition time
Opis:
The problem of eliminating natural gas microflows through the cement slurry while bonding has been investigated by scientists in a number of scientific and research centers. Works have been undertaken to define the causes of gas migration and predict possibilities of interchannel communication in the hardened cement slurry. In the course of bonding cement slurry changes its state from liquid through gel to solid. Accordingly, the gas migration effects should be taken into account in the formation of these phases. The results of tests of gas migration in the course of binding and building structural strength have been presented in this paper. Both research methods have been compared and a high dependence of parameters defined by each of them has been found. The research works were conducted with the use of innovative apparatuses thanks to which the phenomena taking place in the course of binding can be observed. This gives the possibility of working out recipes of sealing slurries applicable to deposits where the risk of occurrence of gas migration is high.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 3; 595-608
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania statycznej wytrzymałości strukturalnej zaczynów cementowych o obniżonej gęstości przeznaczonych do uszczelniania otworów wiertniczych
Studies on static structural strength of reduced density cement slurries for sealing boreholes
Autorzy:
Rzepka, Marcin
Kędzierski, Miłosz
Powiązania:
https://bibliotekanauki.pl/articles/2143333.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
zaczyn cementowy
czas przejścia
migracja gazu
wiązanie cementu
cement slurry
transition time
gas migration
cement setting
Opis:
Prezentowany artykuł jest rozwinięciem zagadnień z zakresu technologii zaczynów uszczelniających dotyczących tzw. procesów żelowania (tj. narastania w zaczynach cementowych statycznej wytrzymałości strukturalnej w trakcie procesu wiązania). W zdecy- dowanej większości dotychczasowych publikacji w czasopismach naukowych i branżowych omawiano jedynie badania procesów żelowania zaczynów o tzw. normalnej gęstości, wynoszącej około 1800–1900 kg/m3 . W niniejszym artykule skoncentrowano się na zagadnieniu narastania statycznej wytrzymałości strukturalnej zaczynów cementowych, których gęstość kształtuje się na poziomie 1450–1600 kg/m3 . Analizując badania prowadzone na świecie należy podkreślić, że w procesie przeciwdziałania ewentualnym ekshalacjom gazowym z przestrzeni pierścieniowej tempo żelowania zaczynu cementowego odgrywa niezwykle istotną rolę. Dotyczy to zarówno zaczynów o normalnej, jak i o obniżonej gęstości. Po zabiegu wytłoczenia zaczynu poza rury okładzinowe znajduje się on początkowo w stanie płynnym i działa na złoże jako ciecz (poprzez wytworzone ciśnienie hydrostatyczne). Następnie po określonym czasie w zaczynie następuje budowa statycznej wytrzymałości strukturalnej SGS (ang. static gel strength), co powoduje stopniowy spadek ciśnienia hydrostatycznego. Proces ten trwa aż do momentu związania cementu. W Instytucie Nafty i Gazu – Państwowym Instytucie Badawczym opracowano szereg receptur innowacyjnych zaczynów cementowych o obniżonej gęstości, do których wprowadzono dodatki nanokomponentów oraz polimeru wielkocząsteczkowego. Gęstość zaczynów obniżano za pomocą dodatku różnych koncentracji mikrosfer. Receptury lekkich zaczynów, które zawierały w odpowiedniej koncentracji wielkocząsteczkowy polimer o symbolu GS, a także te zawierające nanokomponenty w postaci n-SiO2 i n-Al2O3 cechowały się bardzo korzystnym przebiegiem krzywej żelowania (tj. szybkim narastaniem statycznej wytrzymałości strukturalnej). Lekkie zaczyny cementowe o najkorzystniejszych parametrach, tj. krótkich czasach przejścia TT (ang. transition time), mogą znaleźć zastosowanie w procesie cementowania kolumn rur okładzinowych w otworach wiertniczych – zwłaszcza w warstwach słabo zwięzłych lub horyzontach o obniżonym gradiencie ciśnienia złożowego.
The presented article is an extension of the issues in the field of sealing slurries technology related to the so-called gelling processes (i.e. the build-up of static structural strength in cement slurries during the setting process). The vast majority of papers published in scientific and trade journals discussed only the study of the gelling of slurries with the so-called “normal” density of around 1800–1900 kg/m3 . This article focuses on the issue of the build-up of static structural strength of cement slurries, the densities of which range from 1450–1600 kg/m3 . Based on research conducted around the world, it can be concluded that the rate of gelling of the cement slurry plays an important role in the process of preventing possible gas exhalations from the annular space. This is the case with both normal and reduced density of slurry. The initially liquid cement slurry, when pumped out of the casing, acts as a liquid, creating a certain hydrostatic pressure on the deposit. Then, after some time, the period of building the static gel strength (SGS) starts, causing a gradual drop in hydrostatic pressure. This process continues until the cement sets. The Oil and Gas Institute – National Research Institute has developed a number of innovative recipes for cement slurries with reduced density, with added nanocomponent and high-molecular weight polymer additives. The densities of the slurries were lowered with the addition of various amounts of microspheres. The formulas of light slurries containing the high-molecular weight polymer marked as GS in an appropriate concentration and those containing n-SiO2 and n-Al2O3 nanocomponents were characterized by a very advantageous course of the gelation plot (i.e. rapid static build-up of gel strength). Light cement slurries with the most advantageous parameters, i.e. short Transition Times (TT), can be used in the process of cementing casing columns in boreholes, especially in weakly compact layers or horizons with a reduced formation pressure gradient.
Źródło:
Nafta-Gaz; 2022, 78, 3; 197-207
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania procesu żelowania zaczynów cementowych przeznaczonych do uszczelniania otworów przewiercających płytkie poziomy gazonośne
Research on the gelling process of cement slurries for sealing boreholes drilling through shallow gasbearing levels
Autorzy:
Rzepka, Marcin
Kędzierski, Miłosz
Powiązania:
https://bibliotekanauki.pl/articles/2145352.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
zaczyn cementowy
czas przejścia
migracja gazu
wiązanie cementu
cement slurry
transition time
gas migration
cement setting
Opis:
Niniejszy artykuł przedstawia zagadnienia z zakresu technologii zaczynów uszczelniających dotyczące tzw. procesów żelowania (tzn. narastania statycznej wytrzymałości strukturalnej zaczynów cementowych). Na podstawie badań prowadzonych na świecie można stwierdzić, że tempo żelowania zaczynu cementowego odgrywa istotną rolę w procesie przeciwdziałania ewentualnym ekshalacjom gazowym z przestrzeni pierścieniowej. Po wtłoczeniu zaczynu do otworu (zwłaszcza w strefach, w których występują płytko zalegające horyzonty gazowe) może dojść do tzw. migracji (ekshalacji) medium złożowego (tj. niekontrolowanego wypływu np. gazu z przestrzeni pierścieniowej otworu wiertniczego). Do najważniejszych przyczyn powstawania zjawiska migracji gazu z płytkich horyzontów po zabiegu cementowania rur zalicza się niezdolność do utrzymania określonego nadciśnienia przez kolumnę wiążącego zaczynu cementowego oraz zbyt długie wiązanie zaczynu cementowego po zatłoczeniu go do otworu. Zaczyn cementowy po wytłoczeniu poza rury okładzinowe, będący początkowo w stanie płynnym, działa jako ciecz, wywołując określone ciśnienie hydrostatyczne na złoże, np. gazowe. Jednakże po pewnym czasie rozpoczyna się okres budowy statycznej wytrzymałości strukturalnej (SGS, ang. static gel strength), aż do momentu związania cementu. Proces budowy SGS, czyli tzw. żelowania zaczynu cementowego, powoduje ograniczenie zdolności do transmisji (przekazywania) ciśnienia hydrostatycznego na złoże. W Instytucie Nafty i Gazu – Państwowym Instytucie Badawczym przetestowano szereg receptur zaczynów cementowych charakteryzujących się różnym czasem żelowania i wiązania. Zaczyny sporządzane były na bazie m.in.: trzech rodzajów lateksów (o symbolach L1, L2, L3), dwóch rodzajów szkła wodnego (o symbolach S1, S2), krzemionki bezpostaciowej (o symbolu CB), nanokomponentów na bazie n-SiO2 i n-Al2O3 (o symbolach NS i NA) oraz polimeru wielkocząsteczkowego (o symbolu GS). Do testowanych zaczynów stosowano przyspieszacz wiązania w różnych ilościach. Łącznie wykonano badania dla 18 receptur cementowych, co pozwoliło na wytypowanie optymalnych składów zaczynów o krótkich czasach żelowania i wiązania. Próbki zawierające w odpowiedniej koncentracji jeden z rodzajów lateksu, polimer GS, jak i te zawierające n-SiO2 i n-Al2O3 cechowały się bardzo korzystnym przebiegiem krzywej żelowania (narastania statycznej wytrzymałości strukturalnej). Ich czasy przejścia (TT, ang. transition time), odzwierciedlające przebieg żelowania, wynosiły od kilkunastu do kilkudziesięciu minut (co świadczy o ich wysokiej zdolności do zapobiegania migracji gazu z płytkich horyzontów produktywnych). Opracowane w INiG – PIB zaczyny cementowe, z uwagi na ich dobre parametry technologiczne, mogłyby znaleźć zastosowanie w procesie cementowania kolumn rur okładzinowych w otworach wiertniczych, zwłaszcza w przypadkach spodziewanego płytkiego zalegania poziomów gazonośnych.
The article presents issues related to the sealing slurry technology concerning gelling processes (i.e., static built-up of gel strength of cement slurries). Based on research conducted around the world, it can be concluded that the rate of gelling of the cement slurry has an important role in the process of preventing possible gas exhalations from the annular space. After the cement slurry is pumped into the borehole (especially in zones with shallow gas horizons), the so-called migration (exhalation) of the formation medium (i.e. uncontrolled outflow of e.g. gas from the annular space) may occur. The most important caused of gas migration from the shallow horizons after casings cementation are the inability to maintain a certain overpressure by the column of the binding cement slurry and too long binding of the cement slurry after pumping into the borehole. The initially liquid cement slurry, when pumped out of the casing, acts as a liquid, creating a certain hydrostatic pressure on the deposit. e.g. gas. However, after some time, the period of building the static gel strength (SGS) starts until the cement sets. The SGS building process, i.e. gelling of the cement slurry, reduces the ability to transmit hydrostatic pressure to the reservoir. The Oil and Gas Institute – National Research Institute has tested a number of cement slurry formulations characterized by different gelling and bonding times. Slurries were made on the basis of three typed of latex with the symbols L1, L2, L3, two types of water glass with symbols S1, S2, amorphous silica with the symbol CB, nano-components based on n-SiO2 and n-Al2O3 with the symbols NS and NA as well as high-molecular weight polymer with the symbol GS. Different amounts of setting accelerator were used with the tested slurries. Tests were carried out for eighteen cement recipes, which made it possible to select the optimal compositions of slurries with short gelling and setting times. The samples containing one of the types of latex in the appropriate concentration, the GS polymer, as well as those containing n-SiO2 and n-Al2O3, showed a very advantageous course of the gelation plot (static build-up of gel strength). Their TT transition times, reflecting the course of gelation, ranged from several to several tens of minutes (which is a proof of high ability to prevent gas migration from shallow gas accumulations). The cement slurries developed at the Oil and Gas Institute – National Research Institute, due to their good technological parameters, could be used in the process of cementing casing strings.
Źródło:
Nafta-Gaz; 2021, 77, 4; 235-243
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of methods for noise reduction on dynamic characteristics of active resistance imitators
Wpływ metod tłumienia zakłóceń na charakterystyki dynamiczne aktywnych imitatorów rezystancji
Autorzy:
Hotra, O.
Bojko, O.
Majewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/153191.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
aktywne imitatory rezystancji
zakłócenia
charakterystyki częstotliwościowe
czas ustalania
błędy dynamiczne imitowania rezystancji
active resistance imitators
noise
frequency characteristics
transition time
Opis:
The influence of normal mode noise on the accuracy of transmission of standard resistance units using active resistance imitators is analysed. Also the influence of selected methods of noise attenuation on dynamic characteristics of active resistance imitators is investigated. The dynamic errors and transition time of input signals are determined. The investigation results show that the optimisation of the noise reduction and of the dynamic characteristics of active resistance imitators under real industrial conditions is possible by the appropriate selection of frequency-dependent elements.
Przeanalizowano wpływ zakłóceń równoległych na dokładność przekazywania jednostkowej miary wzorca rezystancji za pomocą aktywnych imitatorów rezystancji. Przebadano wpływ wybranych metod tłumienia zakłóceń na charakterystyki dynamiczne aktywnych imitatorów rezystancji. Wyznaczono błędy dynamiczne oraz czas ustalania wartości sygnałów wejściowych. Wyniki badań wykazały, że możliwa jest optymalizacja odporności na zakłócenia i charakterystyk dynamicznych aktywnych imitatorów rezystancji w roboczych warunkach eksploatacji poprzez odpowiedni dobór elementów zależnych od częstotliwości.
Źródło:
Pomiary Automatyka Kontrola; 2008, R. 54, nr 10, 10; 733-736
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie wpływu indeksów zmienności na zmiany współzależności pomiędzy wybranymi rynkami finansowymi
An influence analysis of volatility indices on interdependence changes between selected financial markets
Autorzy:
Czapkiewicz, Anna
Jamer, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/425098.pdf
Data publikacji:
2016
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
hidden Markov model
time-varying transition probability
stock exchange
volatility indices
interdependence analysis
Opis:
The study of interdependence and the strength of the relationship between finan-cial time series is a quite important area in the financial literature. Hence we discussed the relationships between the main stock indices. The multivariate distributions of returns we modelled basing on copula functions approach. In order to obtain some dynamics of multi-variate distributions we applied the hidden Markov chain. Additionally we assumed that the transition matrix of the Markov chain was dependent on some exogenous variables. The study shows that the volatility indices VIX and VSTOXX which were taken as exogenous variables improved model efficiency.
Źródło:
Econometrics. Ekonometria. Advances in Applied Data Analytics; 2016, 3 (53); 87-101
1507-3866
Pojawia się w:
Econometrics. Ekonometria. Advances in Applied Data Analytics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formulas for average transition times between states of the Markov birth-death process
Autorzy:
Zhernovyi, Yuriy
Kopytko, Bohdan
Powiązania:
https://bibliotekanauki.pl/articles/2175497.pdf
Data publikacji:
2021
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
birth-death process
Markov models
mean transition time
mean time spent in the group of states
queueing systems
reliability model
proces narodzin i śmierci
modele Markova
średni czas przejścia
średni czas spędzony w grupie stanów
systemy kolejkowe
model niezawodności
Opis:
In this paper, we consider Markov birth-death processes with constant intensities of transitions between neighboring states that have an ergodic property. Using the exponential distributions properties, we obtain formulas for the mean time of transition from the state i to the state j and transitions back, from the state j to the state i. We found expressions for the mean time spent outside the given state i, the mean time spent in the group of states (0,...,i-1) to the left from state i, and the mean time spent in the group of states (i+1,i+2,...) to the right. We derive the formulas for some special cases of the Markov birth-death processes, namely, for the Erlang loss system, the queueing systems with finite and with infinite waiting room and the reliability model for a recoverable system.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2021, 20, 4; 99--110
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of Markov chain model to the description of Hungarian market processes
Autorzy:
Lipták, Katalin
Powiązania:
https://bibliotekanauki.pl/articles/639694.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Jagielloński. Wydawnictwo Uniwersytetu Jagiellońskiego
Tematy:
discrete-time Markov chain
transition probability
labor market processes
Opis:
Different methods can be selected from the statistical mathematical toolbar to describe labor market processes. The paper applies Markov model, a method rarely used in regard to labor market. This method is popular in several disciplines including regional economics to manage income inequalities, sociology, microeconomics and public health. The advantage of the model is that it illustrates well the mobility in each status making it easier to generate predictions. The paper examines NUTS3 level unemployment data in Hungary over the period 1992–2009 using Markov chain model.
Źródło:
Zarządzanie Publiczne; 2011, 4(16); 133-149
2084-3968
Pojawia się w:
Zarządzanie Publiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Time-frequency Representation -enhanced Transfer Learning for Tool Condition Monitoring during milling of Inconel 718
Autorzy:
Zhou, Yuqing
Sun, Wei
Ye, Canyang
Peng, Bihui
Fang, Xu
Lin, Canyu
Wang, Gonghai
Kumar, Anil
Sun, Weifang
Powiązania:
https://bibliotekanauki.pl/articles/24200823.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
tool condition monitoring
time-frequency analysis
Markov Transition Field
transfer learning
Opis:
Accurate tool condition monitoring (TCM) is important for the development and upgrading of the manufacturing industry. Recently, machine-learning (ML) models have been widely used in the field of TCM with many favorable results. Nevertheless, in the actual industrial scenario, only a few samples are available for model training due to the cost of experiments, which significantly affects the performance of ML models. A time-series dimension expansion and transfer learning (TL) method is developed to boost the performance of TCM for small samples. First, a time-frequency Markov transition field (TFMTF) is proposed to encode the cutting force signal in the cutting process to two-dimensional images. Then, a modified TL network is established to learn and classify tool conditions under small samples. The performance of the proposed TFMTF-TL method is demonstrated by the benchmark PHM 2010 TCM dataset. The results show the proposed method effectively obtains superior classification accuracies for small samples and outperforms other four benchmark methods.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 2; art. no. 165926
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Energetic Binder for the Formulation of Advanced Solid Rocket Propellants
Autorzy:
Bhowmik, D.
Sadavarte, V. S.
Pande, S. M.
Saraswat, B. S.
Powiązania:
https://bibliotekanauki.pl/articles/358431.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
BTTN
polyol
low temperature strain capability
glass transition temperature
gel time
Opis:
Many promising elastomers and energetic binders are reported in the literature for their probable application in propellant formulations. However, their application in actual systems is still restricted due to many inherent limitations. Therefore, an attempt has been made to study the performance of an advanced energetic solid propellant based on an energetic binder comprising a polyol with high hydroxyl functionality plasticized with 1,2,4-butanetriol trinitrate (BTTN). In order to examine the physico-chemical properties of the BTTN/Polyol binder system, the polyol and a series of binders have been formulated and cured with different di-isocyanates viz. TDI, IPDI and H12MDI, and the cured binder sheets were evaluated for their mechanical properties, decomposition temperatures and glass transition temperatures (Tg). The pot life of a representative binder system with various di-isocyanates has also been determined using a gelation timer apparatus. The overall result of this study establishes that the energetic binder system under study has potential applications in the formulation and processing of advanced energetic solid propellant compositions for case bonded rocket motors, offering higher density, higher energy and better low temperature strain capability as compared to conventional HTPB-based composite propellants.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 1; 145-158
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Differences in Leisure Time Physical Activity Predictors in Europe
Autorzy:
Bartolj, Tjaša
Slabe-Erker, Renata
Powiązania:
https://bibliotekanauki.pl/articles/1810892.pdf
Data publikacji:
2015-06-30
Wydawca:
Polskie Towarzystwo Socjologiczne
Tematy:
leisure time physical activity
transition
policy measures
quality of life
predictors
Opis:
This paper contributes to the literature by showing that discrepancies in leisure time physical activity between transition and non-transition countries are mainly due to lower activity by persons, who are in relationship, are older, reside in rural areas and/or have a lower income. Unlike existing studies our results of logit models show that, controlling for all other variables, females are equally likely (in transition economies) or more likely (in non-transition economies) to be regularly active in their leisure time than males. We believe that the reason for differences in results is omitted variable bias, since papers that find women to be less active do not control for person’s income.
Źródło:
Polish Sociological Review; 2015, 190, 2; 239-254
1231-1413
2657-4276
Pojawia się w:
Polish Sociological Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new approach to robust finite-time H∞ control of continuous-time Markov jump systems
Autorzy:
Yan, S.
Shen, M.
Fei, S.
Zhang, G.
Powiązania:
https://bibliotekanauki.pl/articles/206785.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
Markov jump systems
partly known transition probabilities
rob ust finite-time H∞control
Opis:
This paper studies the robust finite-time H∞ state feedback control problem of continuous-time Markov jump systems (MJSs) subject to norm bounded uncertainties. Transition probabilities are allowed to be known, uncertain with known bounds or unknown. Based on the continuous transition probability property and the developed slack variable technique, Lyapunov variables are separatek from unknown transition probabilities and system matrices. With these separations, a relaxed method for robust finite-time H∞ controller design is proposed in terms of linear matrix inequalities (LMIs). Numerical examples are given to illustrate the effectiveness of and the benefit from the proposed method.
Źródło:
Control and Cybernetics; 2015, 44, 2; 211-231
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ANALIZA PRAWDOPODOBIEŃSTW ZMIANY STANU PROCESU MIGRACJI WARTOŚCI PRZEDSIĘBIORSTW Z WYKORZYSTANIEM ŁAŃCUCHÓW MARKOWA
The analysis of the probabilities of the transitions between value migration stages basedon Markov chains
Autorzy:
Siudak, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/950958.pdf
Data publikacji:
2013
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
value migration
Markov chain
probability of transition
estimated return time for Markov chain
Opis:
The paper analyzes processes of value migration on the Polish market. It employed mathematical methods of process analysis in the form of Markov chain and estimated the probability of the migration between stages of inflow, outflow and stability according to the three stages of value migration. The article estimated the length of period of getting back from the distinct state of the chain to its first return to the same state. In the long period there are observed higher probability of being in the state of inflow than outflow of value. Regardless of the initial state of value migration in which a company currently is, every remaining state can be achieved. Moreover, the considered value migration process is variable. Thus within 1 year time, the processes is unstable.
Źródło:
Financial Sciences. Nauki o Finansach; 2013, 4 (17); 81-100
2080-5993
2449-9811
Pojawia się w:
Financial Sciences. Nauki o Finansach
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling and Forecasting WIG20 Daily Returns
Autorzy:
Amado, Cristina
Silvennoinen, Annastiina
Teräsvirta, Timo
Powiązania:
https://bibliotekanauki.pl/articles/2076424.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
autoregressive conditional heteroskedasticity
forecasting volatility
modelling volatility
multiplicative time-varying GARCH
smooth transition
Opis:
The purpose of this paper is to model daily returns of the WIG20 index. The idea is to consider a model that explicitly takes changes in the amplitude of the clusters of volatility into account. This variation is modelled by a positive-valued deterministic component. A novelty in specification of the model is that the deterministic component is specified before estimating the multiplicative conditional variance component. The resulting model is subjected to misspecification tests and its forecasting performance is compared with that of commonly applied models of conditional heteroskedasticit
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2017, 3; 173-200
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Descriptor fractional continuous - time linear systems
Singularne układy liniowe ciągłe rzędu niecałkowitego
Autorzy:
Kaczorek, T.
Powiązania:
https://bibliotekanauki.pl/articles/252334.pdf
Data publikacji:
2012
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
continuous-time linear systems
computation of transition matrices
Laplace transform
liniowe układy ciągłe
wyznaczanie macierzy tranzycji
przekształcenie Laplace’a
Opis:
A new method for computation of the solution to the state equation of descriptor fractional continuous-time linear systems with regular pencils is proposed. The derivations of the solution is based on the application of the Laplace transform and the convolution theorem. A procedure for computation of the transition matrices is proposed and demonstrated on simple numerical example.
W pracy podano nową metodę wyznaczania rozwiązania równań stanu singularnego o pęku regularnym ciągłego układu rzędu niecałkowitego. Rozwiązanie to wyprowadzono stosując przekształcenie Laplace’a oraz twierdzenie o transformacie splotu. Zaproponowano procedurę wyznaczania macierzy tranzycji. Proponowaną metodę zlustrowano przykładem numerycznym.
Źródło:
TTS Technika Transportu Szynowego; 2012, 9; 291-297, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies