Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "transient temperature" wg kryterium: Temat


Wyświetlanie 1-8 z 8
Tytuł:
The analysis of thermocouple time constants as a function of fluid velocity
Autorzy:
Majdak, M.
Jaremkiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/114056.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
time constant
thermocouple
transient temperature measurement
experimental analysis
Opis:
In steady-state conditions when the fluid temperature is constant, there is no damping and time lag so the temperature measurement can be performed with a high accuracy. But when the fluid temperature is varying rapidly as during the start-up, quite appreciable differences occur between the exact and measured temperature because of the time required for the transfer of heat to the thermocouple placed inside a thermometer pocket. The temperature of the fluid is one of the key parameters affecting the proper operation of thermodynamic cycles, so the precise determination of its value is very important. The speed of the response of control systems to a temperature change is closely related to the time constant of the used thermocouples. The paper presents a significant impact of fluid velocity changes (in this case air) on the value of time constants of thermometers. For this purpose, the experimental study was carried out using sheathed thermometers with different diameters and hot junctions. The time constants determined for various thermometers are compared.
Źródło:
Measurement Automation Monitoring; 2016, 62, 9; 284-287
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Propagacja wiązki światła lasera w powietrzu o nieustalonym polu temperatury
Laser beam propagation in the air with transient temperature field
Autorzy:
Klemm, K.
Pieszyński, K.
Rożniakowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/362876.pdf
Data publikacji:
2007
Wydawca:
Instytut Fizyki Budowli Katarzyna i Piotr Klemm
Tematy:
nieustalone pola temperatury
wiązka światła lasera
transient temperature field
laser light beam
Opis:
W pracy przedstawiono teoretyczną analizę oraz wyniki eksperymental- nych badań zagadnienia propagacji laserowej wiązki światła w powietrzu o zmiennym w czasie i przestrzeni polu temperatury.
The work presents short theoretical analysis and the results of experimental examinations of the problem of laser beam propagation in the air with temporal and spatial changes of the temperature field.
Źródło:
Fizyka Budowli w Teorii i Praktyce; 2007, T. 2; 129-132
1734-4891
Pojawia się w:
Fizyka Budowli w Teorii i Praktyce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of temperature and thermal stresses distribution in power boiler elements with use inverse heat conduction method
Autorzy:
Grądziel, S.
Powiązania:
https://bibliotekanauki.pl/articles/240169.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metoda inwersji
propagacja nacisków
szybkozmienna temperatura
współczynnik przenikania ciepła
heat transfer coefficient
inverse method
stress distribution
transient temperature
Opis:
The following paper presents the method for solving one-dimensional inverse boundary heat conduction problems. The method is used to estimate the unknown thermal boundary condition on inner surface of a thick-walled Y-branch. Solution is based on measured temperature transients at two points inside the element's wall thickness. Y-branch is installed in a fresh steam pipeline in a power plant in Poland. Determination of an unknown boundary condition allows for the calculation of transient temperature distribution in the whole element. Next, stresses caused by non-uniform transient temperature distribution and by steam pressure inside a Y-branch are calculated using the finite element method. The proposed algorithm can be used for thermal-strength state monitoring in similar elements, when it is not possible to determine a 3-D thermal boundary condition. The calculated temperature and stress transients can be used for the calculation of element durability. More accurate temperature and stress monitoring will contribute to a substantial decrease of maximal stresses that occur during transient start-up and shut-down processes.
Źródło:
Archives of Thermodynamics; 2011, 32, 3; 191-200
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The thermal characteristics of ACCR lines as a function of wind speed – an analytical approach
Autorzy:
Zaręba, Marek
Gołębiowski, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/2173672.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wind speed
transient temperature field
steady temperature field
ACCR line
mathematical modeling
prędkość wiatru
pole temperatury stacjonarne
pole temperatury niestacjonarne
linia ACCR
modelowanie matematyczne
Opis:
The paper has investigated the effect of wind speed on selected thermal characteristics of the contemporary ACCR line. As wind speed functions, heating curves, stationary temperature profiles, steady-state current ratings and thermal time constants, have been determined. The composite core (Al–Al2O3) and the Al–Zr alloy braid were modeled as porous solids. As a result, the physical model is composed of a solid cylinder and a hollow cylinder with different material parameters of the above-mentioned elements. The mathematical model was formulated as the boundary-initial problem of the parabolic heat equation. The problem was solved by the state-superposition of and variable-separation method. On this basis, a computer program was developed in the Mathematica 10.4 environment and the velocity characteristics sought for were plotted. The results obtained analytically were positively verified by the finite-element method in the NISA v.16 environment. The physical interpretation of the determined characteristics has been given.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2022, 70, 3; art. no. e141006
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature changes in the vicinity of thermally loaded structure embedded in the soil: effect of sand content and saturation degree
Autorzy:
Różański, A.
Powiązania:
https://bibliotekanauki.pl/articles/178365.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
transient heat flow
temperature
quartz
organic matter
degree of saturation
Opis:
Due to the rapid development of geothermal technologies, the problem of efficient and proper evaluation of soil thermal conductivity becomes extremely important. Factors mostly affecting the soil conductivity are the conductivity of solid phase and the degree of saturation. The former one is mainly affected by the mineral composition, in particular, by the content of quartz whose conductivity is the highest one among all the minerals forming soil skeleton. Organic matter, because of its relatively low conductivity, influences the solid conductivity as well. The problem addressed in the paper is the influence of mentioned factors on temperature changes in the vicinity of thermally loaded structure embedded in the soil medium. Numerical simulations are carried out for different values of soil thermal conductivity resulting from various quartz contents and degrees of saturation. In addition, a weak coupled – heat and water transport – problem is considered.
Źródło:
Studia Geotechnica et Mechanica; 2017, 39, 2; 61-71
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of transient fluid temperature using the inverse method
Autorzy:
Jaremkiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/240590.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
temperature measurement
transient conditions
uncertainty analysis
pomiar temperatury
warunki przejściowe
analiza niepewności
Opis:
This paper proposes an inverse method to obtain accurate measurements of the transient temperature of fluid. A method for unit step and linear rise of temperature is presented. For this purpose, the thermometer housing is modelled as a full cylindrical element (with no inner hole), divided into four control volumes. Using the control volume method, the heat balance equations can be written for each of the nodes for each of the control volumes. Thus, for a known temperature in the middle of the cylindrical element, the distribution of temperature in three nodes and heat flux at the outer surface were obtained. For a known value of the heat transfer coefficient the temperature of the fluid can be calculated using the boundary condition. Additionally, results of experimental research are presented. The research was carried out during the start-up of an experimental installation, which comprises: a steam generator unit, an installation for boiler feed water treatment, a tray-type deaerator, a blow down flashvessel for heat recovery, a steam pressure reduction station, a boiler control system and a steam header made of martensitic high alloy P91 steel. Based on temperature measurements made in the steam header using the inverse method, accurate measurements of the transient temperature of the steam were obtained. The results of the calculations are compared with the real temperature of the steam, which can be determined for a known pressure and enthalpy.
Źródło:
Archives of Thermodynamics; 2014, 35, 1; 61-76
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Behaviour of cement concrete at high temperature
Autorzy:
Hager, I.
Powiązania:
https://bibliotekanauki.pl/articles/201988.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
concrete
high temperature
fire damage
thermal strain
transient thermal strain
hot tested mechanical properties
residual properties
Opis:
The paper presents the impact of high temperature on cement concrete. The presented data have been selected both from the author’s most recent research and the published literature in order to provide a brief outline of the subject. The effect of a high temperature on concrete covers changes taking place in cement paste, aggregates, as well as the interaction of these two constituents, that result in changes of mechanical and physical characteristics of concrete. This paper presents the effects of a high temperature on selected physical properties of concrete, including colour change, thermal strain, thermal strains under load, and transient thermal strains. In addition, changes to mechanical properties are discussed: stress-strain relationship, compressive strength, and modulus of elasticity. Moreover, the phenomenon of explosive spalling and the main factors that affect its extent are analysed in light of the most recent research.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 1; 145-154
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reduction of dynamic error in measurements of transient fluid temperature
Autorzy:
Jaremkiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/240052.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
analiza niepewności
model pierwszego obiektu
pomiar temperatury
stała czasowa
warunki przejściowe
first-order model
temperature measurement
time constant
transient conditions
uncertainty analysis
Opis:
Under steady-state conditions when fluid temperature is constant, temperature measurement can be accomplished with high degree of accuracy owing to the absence of damping and time lag. However, when fluid temperature varies rapidly, for example, during start-up, appreciable differences occur between the actual and measured fluid temperature. These differences occur because it takes time for heat to transfer through the heavy thermometer pocket to the thermocouple. In this paper, a method for determinig transient fluid temperature based on the first-order thermometer model is presented. Fluid temperature is determined using a thermometer, which is suddenly immersed into boiling water. Next, the time constant is defined as a function of fluid velocity for four sheated thermocouples with different diameters. To demonstrate the applicability of the presented method to actual data where air velocity varies, the temperature of air is estimated based on measurements carried out by three thermocouples with different outer diameters. Lastly, the time constant is presented as a function of fluid velocity and outer diameter of thermocouple.
Źródło:
Archives of Thermodynamics; 2011, 32, 4; 55-66
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies