Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "thermal shock" wg kryterium: Temat


Tytuł:
Non-destructive methods determination of thermal shock resistance of natural building stones applicated with different water repellent chemicals on their surfaces
Metody nieniszczące oznaczania odporności na szok termiczny naturalnych kamieni budowlanych nakładanych na ich powierzchnie różnymi środkami hydrofobowymi
Autorzy:
Ekincioğlu, Gökhan
Powiązania:
https://bibliotekanauki.pl/articles/27311654.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
natural stone
water repellent chemical
thermal shock
color analysis
Leeb hardness
kamień naturalny
środek hydrofobowy
szok termiczny
analiza barwy
twardość Leeba
Opis:
Natural stones are used as coating material on the exteriors and terraces of buildings in architecture, and in places such as entrances, halls, living rooms, kitchens, bathrooms and stairs in interior spaces. Limra limestone and travertine are used as natural building materials in many structures depending on their colors. However, the water absorption values of these two natural stones are high due to their porosity, resulting in negative effects from atmospheric conditions. In this study, two different carbonate-based natural stones, limra limestone and travertine, were treated with two different water-repellent chemicals, one solvent-based and one water-based. After application, thermal shock tests were performed with a sodium chloride solution consisting of twenty cycles. The changes in the weights of samples dried to constant mass, ultrasonic permeability, Leeb hardness, and color change values in the samples were determined after the thermal shock tests. In addition, the effects of water-repellent chemicals on the formation of NaCl crystals accumulated in the pores of the rocks were examined by SEM and EDX analysis. Changes in non-destructively measured values were compared with the values of reference samples without surface protection. The solvent-based water-repellent chemical made the sample surface more hydrophobic than the water-based repellent. In both types of natural stones, the solvent-based water repellent chemical showed more protective properties against salt crystallization under thermal shock conditions compared to the water-based repellent.
Kamienie naturalne są stosowane jako materiał powłokowy na zewnątrz i tarasach budynków w architekturze oraz w miejscach takich jak wejścia, hole, pokoje dzienne, kuchnie, łazienki i schody w przestrzeniach wewnętrznych. Wapień limra i trawertyn są wykorzystywane jako naturalne materiały budowlane w wielu konstrukcjach w zależności od ich kolorystyki. Jednak wartości nasiąkliwości tych dwóch kamieni naturalnych są wysokie ze względu na ich porowatość, co skutkuje negatywnym oddziaływaniem warunków atmosferycznych. W tym badaniu dwa różne kamienie naturalne na bazie węglanów, wapień limra i trawertyn, potraktowano dwoma różnymi hydrofobowymi chemikaliami, jednym na bazie rozpuszczalnika i jednym na bazie wody. Po aplikacji przeprowadzono testy szoku termicznego z roztworem chlorku sodu składające się z 20 cykli. Zmiany masy suszonych do stałej masy próbek, przepuszczalność ultradźwięków, twardość Leeba oraz zmiany barwy w próbkach określono po testach szoku termicznego. Ponadto zbadano wpływ chemikaliów hydrofobowych na powstawanie kryształów NaCl gromadzących się w porach skał za pomocą analizy SEM (skaningowa mikroskopia elektronowa) i EDX (rentgenowska dyspersja energii). Zmiany wartości mierzonych w sposób nieniszczący porównano z wartościami próbek referencyjnych bez zabezpieczenia powierzchni. Środek hydrofobowy na bazie rozpuszczalnika sprawił, że powierzchnia próbki była bardziej hydrofobowa niż powierzchnia na bazie wody. W obu typach kamieni naturalnych hydrofobowa substancja chemiczna na bazie rozpuszczalnika wykazywała lepsze właściwości ochronne przed krystalizacją soli w warunkach szoku termicznego w porównaniu z substancją na bazie wody.
Źródło:
Gospodarka Surowcami Mineralnymi; 2023, 39, 3; 81--101
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on in vitro haploidization of heterozygotic breeding lines of tomato (Solanum lycopersicum L.)
Autorzy:
Kiszczak, Waldemar
Kowalska, Urszula
Burian, Maria
Powiązania:
https://bibliotekanauki.pl/articles/2199748.pdf
Data publikacji:
2021-09-29
Wydawca:
Instytut Hodowli i Aklimatyzacji Roślin
Tematy:
fitohormony
genotyp
mikrosporogeneza
sterylizacja
szok termiczny
pomidor
genotype
microsporogenesis
phytohormones
sterilization
thermal shock
tomato
Opis:
Experiments were made in order to examin the influence of various factors on the induction of androgenesis in heterozygous breeding material of tomato. The factors like: length of buds the manner of sterilization, type and the composition of induction media, genotype and thermal shock were included in conducted experiments. Most of all sterile cultures with the highest number of anther-derived callus were obtain by applying 2,5% calcium hypochlorite for 5 minutes. Anther-derived calli was obtained in 9 breeding lines from 18 used genotypes. The induction medium with the composition based on B5 medium with the addition of 750 mg L-1 calcium chloride and 100 g L-1 sucrose proved to be the best for inducing androgenesis. The addition of thidiazuron and NAA to this medium in the following season and silver nitrate in the other experiminet improved the efficiency of this process, which was depended on the genotype. Despite the lack of statistically significant differences, the highest number of anther-derived calli was obtained when anthers were cooled for 2 days in +4oC in the refrigerating chamber.
Przeprowadzono doświadczenia, w których zbadano wpływ różnych czynników na indukcję androgenezy u heterozygotycznych linii hodowlanych pomidora. Poddano analizie następujące czynniki: długość pąka, sposób wyjaławiania materiału roślinnego, genotyp, rodzaj i skład pożywki indukcyjnej oraz szok termiczny. Wykazano, że długość pylnika jest dobrym zewnętrznym markerem faz rozwojowych mikrospor pomidora. Stosując 2,5% podchloryn wapnia przez 5 minut uzyskano najwięcej czystych kultur i największą ilość kalusa pochodzącego z tych kultur. Z 18 użytych linii hodowlanych u 9 linii hodowlanych uzyskano kalus pochodzenia pylnikowego. Skład pożywki indukcyjnej B5 z 750 mg L-1chlorku wapnia i 100 g L-1 sacharozy okazał się najlepszy dla wywołania androgenezy. Dodatek thidiazuronu oraz kwasu naftylo-1-octowego do tej pożywki w następnym sezonie oraz azotanu srebra w innym doświadczeniu podniósł efektywność tego procesu, który jak wykazaliśmy, uzależniony był od genotypu. Mimo braku statystycznie istotnych różnic zaobserwowano najwyższą ilość kalusa, gdy pylniki chłodzono przez 2 doby w +4oC.
Źródło:
Biuletyn Instytutu Hodowli i Aklimatyzacji Roślin; 2021, 294; 51-60
0373-7837
2657-8913
Pojawia się w:
Biuletyn Instytutu Hodowli i Aklimatyzacji Roślin
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ długotrwałego oddziaływania cyklicznych zjawisk atmosferycznych na właściwości piaskowców istebniańskich
The influence of long-term cyclic atmospheric phenomena on the Istebna sandstone properties
Autorzy:
Figarska-Warchoł, Beata
Sierakowska, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/2076216.pdf
Data publikacji:
2021
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
piaskowce istebniańskie
szok termiczny
fizyczne wietrzenie
gęstość pozorna
absorpcja wody na wagę
prędkość fali ultradźwiękowej
Istebna sandstones
thermal shock
physical weathering
apparent density
water absorption by weight
ultrasonic wave velocity
Opis:
The Istebna sandstones are one of the main stone materials used for centuries in the construction industry in Kraków and the surrounding area. It was supported not only by their decorative properties and technical parameters, but also the proximity of the outcrops. The results of research on changes in the physical and mechanical properties of samples taken from the Czasław and Sobolów deposits are presented. They represent two structural varieties, subjected to fatigue by cyclic processes of freezing and thermal shock. Such a treatment of the samples was aimed at recreating the natural conditions in which the stone elements are subjected to the destructive effects of atmospheric phenomena associated with temperature changes during winter and summer periods. Data on the weather conditions in Kraków for the period 1951-2020 were used to assess the effect of climate on the intensity of the impact of the two above factors and, additionally, the destructive effect of rock salt, used for de-icing road surfaces. An attempt was also made to forecast the expected rate of destruction of the Istebna sandstones, based on the analysis of climate change.
Źródło:
Przegląd Geologiczny; 2021, 69, 2; 109--119
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of thermomechanical processes in miniature membrane elastic elements
Autorzy:
Tykhan, M.
Dilay, I.
Markina, O.
Markovych, V.
Powiązania:
https://bibliotekanauki.pl/articles/368701.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
thermal stress
thermal deformation
thermal shock
elastic elements
elastic hinge
naprężenie termiczne
odkształcenia cieplne
szok termiczny
elementy elastyczne
zawias elastyczny
Opis:
Purpose: The demand for the devices structures reliability and machines requires understanding elements operation, in particular elastic elements, under the effect of nonstationary temperature factors. Therefore, it is important to investigate the behaviour of these elements under variable temperature effecting. Design/methodology/approach: In this article, the temperature field and the thermal stresses of the membrane type elastic elements, as well as the thermal deformation of its body part were investigated by the method of numerical analysis. The theoretical results have experimental confirmation. Findings: The article shows possibilities significantly reduce the thermal stress in an elastic element, thereby increase its functional and structural reliability by varying the geometric parameters of the elastic element, the materials selection, and body shape. Research limitations/implications: Numerical modelling of thermal processes requires accurate information about the physico-mechanical properties of materials and heat-exchange coefficient, which in practice may differ from the theoretical ones. Therefore, experimental confirmation of research and decisions is needed. The influence of the "hot" thermal shock was investigated. There is performed interest to investigate the "cold" thermal shock. Practical implications: The obtained results allow creating elastic elements with better functional characteristics for operation in a wide temperature range. They can also be used in the designing of elastic elements not only of membrane type. Originality/value: Performed investigation of thermomechanical processes in the membrane elastic element has revealed important features of its temperature deformations with nonstationary thermal influence. Namely, the nature of thermal deformations can be changed by selecting the geometrical parameters of the element, its material, as well as the conditions of heat-exchange conditions with mating member (body). In this way, it is possible to obtain a controlled deformation and to design the elastic elements with predetermined functional tasks. On the other hand, the design of the membrane element body can create elastic hinges, which allows reducing the thermal stress in the membrane, which significantly increases the reliability of the element operation of this type in conditions of non-stationary temperatures. In general, the conducted investigations allow efficient design of elastic elements for devices, sensors and other precision mechanisms.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2020, 98, 1; 24-31
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Life Prediction Mechanism of Ladle Composite Structure Body Based on Simulation Technology
Autorzy:
Li, Gongfa
Jiang, Du
Sun, Ying
Jiang, Guozhang
Tao, Bo
Powiązania:
https://bibliotekanauki.pl/articles/353596.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ladle life prediction
initiative maintenance
crack propagation
thermal shock method
Opis:
Ladle plays an important role in the metallurgical industry whose maintenance directly affects the production efficiency of enterprises. In view of the problems such as low maintenance efficiency and untimely maintenance in the current ladle passive maintenance scheme, the life prediction mechanism for ladle composite structures is established which bases on the stress analysis of steel shell and ladle lining in the production process, combining conventional fatigue analysis and extended fracture theory. The mechanism is accurate and effective according to the simulation results. Through which, the useful life of steel shell can be accurately predicted by detecting the crack length of it. Due to the large number of factors affecting the life of the lining of the ladle, it is difficult to accurately predict the life of the ladle lining, so a forecasting mean based on the thermal shock method is proposed to predict the service life of the ladle lining in this paper. The life prediction mechanism can provide data support and theoretical guidance for the active maintenance of the ladle, which is the prerequisite for scientifically formulating ladle initiative maintenance program.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1555-1562
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability Examinations of SAC Lead Free Solder Material
Autorzy:
Koncz-Horváth, D.
Gergely, G.
Gyökér, Z.
Gácsi, Z.
Powiązania:
https://bibliotekanauki.pl/articles/354957.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
SAC
thermal shock test
intermetallic layer
crack
Opis:
In this paper the effect of soldering technique and thermal shock test were investigated on SAC 305 solder joints, produced by two different solder method. The solder joints were subjected to different cycle numbers up to 5000 thermal shock tests with two different thermal profiles of –30/+110°C and –40/+125°C. Microstructural properties of the tested joints were examined with the focus on intermetallic layer thickness and crack formation/propagation. Thickness of the scallop shaped Cu6Sn5 intermetallic layer was increased with increasing cycle number for both THRS and multiwave joints, but the thickening was more effective for the THRS joints. Cracks typically formed at the solder alloy/PTH barrel and the solder alloy/pin interfaces and propagated along grain boundaries and precipitations of intermetallic compound.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 925-930
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Shock Resistance of Cast Iron with Various Shapes of Graphite Precipitates
Autorzy:
Jakubus, A.
Soiński, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/379522.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
graphite precipitates
thermal shock
żeliwo
wydzielenia grafitu
szok termiczny
Opis:
The influence of a shape of graphite precipitates in cast iron on the thermal shock resistance of the alloy was initially determined. Investigations included the nodular cast iron and the vermicular one, as well as the cast iron containing flake graphite. The thermal shock resistance was examined at a special laboratory stand which allowed for multiple heating and cooling of specimens within the presumed temperature range. The specimens were inductively heated and then cooled in water of constant temperature of about 30°C. There were used flat specimens 70 mm long, 5 mm thick in the middle part, and tapering like a wedge over a distance of 15 mm towards both ends. The total length of cracks generated on the test surfaces of the wedge-shaped parts of specimens was measured as a characteristic value inversely proportional to the thermal shock resistance of a material. The specimens heated up to 500°C were subjected to 2000 test cycles of alternate heating and cooling, while the specimens heated up to 600°C underwent 1000 such cycles. It was found that as the heating temperature rose within the 500-600°C range, the thermal shock resistance decreased for all examined types of cast iron. The research study proved that the nodular cast iron exhibited the best thermal shock resistance, the vermicular cast iron got somewhat lower results, while the lowest thermal shock resistance was exhibited by grey cast iron containing flake graphite.
Źródło:
Archives of Foundry Engineering; 2018, 18, 2; 121-124
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation of Stress Intensity Factor for an Internal Circumferential Crack in a Rotating Functionally Graded Thick-Walled Hollow Circular Cylinder under Thermal Shock
Autorzy:
Ghafoor, E. M. R.
Rokhi, M. M.
Powiązania:
https://bibliotekanauki.pl/articles/139658.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal shock
circumferential cracks
functionally graded materials
thick-walled hollow cylinder
szok termiczny
pęknięcia obwodowe
funkcjonalne materiały gradientowe
grubościenny wydrążony w środku cylinder
Opis:
In this article, the fracture behavior of functionally graded thick-walled cylinder under thermo-mechanical shock is investigated. For this purpose, classical coupled thermoelastic equations are used in calculations. First, these equations are discretized with extended finite element method (XFEM) in the space domain and then they are solved by the Newmark method in the time domain. The most general form of interaction integral is extracted for axially symmetric circumferential crack in a cylinder under thermal and mechanical loads in functionally graded materials and is used to calculate dynamic stress intensity factors (SIFs). The problem solution has been implemented in MATLAB software.
Źródło:
Archive of Mechanical Engineering; 2017, LXIV, 4; 455-479
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Correlation Between Pin Misalignment and Crack Length in THT Solder Joints
Autorzy:
Molnar, A.
Benke, M.
Gacsi, Z.
Powiązania:
https://bibliotekanauki.pl/articles/353833.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
THT solder joint
pin misalignment
crack propagation
thermal shock tests
Opis:
In this manuscript, correlations were searched for between pin misalignments relative to PCB bores and crack propagation after cyclic thermal shock tests in THT solder joints produced from lead-free solder alloys. In total, 7 compositions were examined including SAC solders with varying Ag, Cu and Ni contents. The crack propagation was initiated by cyclic thermal shock tests with 40°C / +125°C temperature profiles. Pin misalignments relative to the bores were characterized with three attributes obtained from one section of the examined solder joints. Cracks typically originated at the solder/pin or solder/bore interfaces and propagated within the solder. It was shown that pin misalignments did not have an effect on crack propagation, thus, the solder joints’ lifetime.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1063-1066
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part IV) Modelling the heating process and determining the serviceability of hydraulic components during the starting-up in low ambient temperature
Autorzy:
Jasiński, R.
Powiązania:
https://bibliotekanauki.pl/articles/260163.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
hydraulic drive
hydraulic components
thermal shock
computer simulation
Opis:
Designers of hydraulically driven machines and devices are obliged to ensure during design process their high service life with taking into account their operational conditions. Some of the machines may be started in low ambient temperature and even in thermal shock conditions (due to delivering hot working medium to cold components). In order to put such devices into operation appropriate investigations, including experimental ones - usually very expensive and time-consuming, are carried out. For this reason numerical calculations can be used to determine serviceability of a hydraulic component or system operating in thermal shock conditions. Application of numerical calculation methods is much less expensive in comparison to experimental ones. This paper presents a numerical calculation method which makes it possible to solve issues of heat exchange in elements of investigated hydraulic components by using finite elements method. For performing the simulations the following data are necessary: ambient temperature, oil temperature, heat transfer coefficient between oil and surfaces of elements, as well as areas of surfaces being in contact with oil. By means of computer simulation method values of clearance between cooperating elements as well as ranges of parameters of correct and incorrect operation of hydraulic components have been determined. In this paper results of computer simulation of some experimentally tested hydraulic components such as axial piston pump and proportional spool valve, are presented. The computer simulation results were compared with the experimental ones and high conformity was obtained.
Źródło:
Polish Maritime Research; 2017, 3; 45-57
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part V) methods ensuring correct start-up of hydraulic components of ship’s onboard devices in low ambient temperatures
Autorzy:
Jasiński, R.
Powiązania:
https://bibliotekanauki.pl/articles/259768.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
hydraulic drive
hydraulic components
thermal shock
computer simulation
Opis:
A large number of hydraulic devices and systems are started in low ambient temperatures. A good example of such a device is the hoisting winch on the ship. Starting hydraulic drive units in thermal shock conditions (rapid supply of hot oil to the cold unit) may lead to incorrect operation of the actuating system, for instance, due to the loss of clearance between cooperating elements. The article presents methods to prevent the disappearance of effective clearance in a hydraulic motor started in thermal shock conditions. For this reason, the structure of the hydraulic satellite motor was complemented by elements creating special channels through which hot oil could flow and additionally heat fixed parts of the motor. This solution ensures faster heating of motor housing, thus decreasing the temperature difference between the housing and the satellites during motor start-up in thermal shock conditions.
Źródło:
Polish Maritime Research; 2017, 4; 47-56
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element modeling of material fatigue and cracking problems for steam power system HP devices exposed to thermal shocks
Analiza rozwoju pęknięć w elementach urządzeń energetyki cieplnej pracujących w warunkach zmiennych temperatur
Autorzy:
Pawlicki, J.
Marek, P.
Zwoliński, J.
Powiązania:
https://bibliotekanauki.pl/articles/140284.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal shock
low cycle fatigue
crack growth under thermal shocks
adaptation to thermal shocks
leak but not burst
szok termiczny
zmęczenie niskocyklowe
wzrost pęknięć pod wpływem szoków termicznych
przystosowanie się do szoków termicznych
wyciek ale nie rozerwanie
Opis:
The paper presents a detailed analysis of the material damaging process due to lowcycle fatigue and subsequent crack growth under thermal shocks and high pressure. Finite Element Method (FEM) model of a high pressure (HP) by-pass valve body and a steam turbine rotor shaft (used in a coal power plant) is presented. The main damaging factor in both cases is fatigue due to cycles of rapid temperature changes. The crack initiation, occurring at a relatively low number of load cycles, depends on alternating or alternating-incremental changes in plastic strains. The crack propagation is determined by the classic fracture mechanics, based on finite element models and the most dangerous case of brittle fracture. This example shows the adaptation of the structure to work in the ultimate conditions of high pressure, thermal shocks and cracking.
W pracy przedstawiono szczegółową analizę rozwoju pęknięć w wyniku niskocyklicznego zmęczenia materiału w warunkach szoków cieplnych i oddziaływania ustalonych obciążeń statycznych. Przeprowadzono analizę przebiegu procesu pękania na przykładzie korpusu zaworu redukcyjnego pary w elektrowni węglowej i wału wirnika turbiny parowej. Głównym czynnikiem w obydwu przypadkach są mniej lub bardziej gwałtowne powtarzalne cykle zmian temperatury .W przypadku inicjacji pęknięcia po stosunkowo małej liczbie cykli zmian obciążenia mechanizm zmęczenia zależy od naprzemiennej lub naprzemienno-przyrostowej zmiany odkształceń plastycznych. Propagację pęknięcia w głąb materiału wyznaczono metodami klasycznej mechaniki pękania na podstawie modeli MES i najbardziej niebezpiecznego modelu pękania kruchego. Przedstawiono przypadek przystosowania się konstrukcji do pracy w warunkach szoków cieplnych i pękania.
Źródło:
Archive of Mechanical Engineering; 2016, LXIII, 3; 413-434
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-stationary thermal self-action of acoustic beams containing fronts in thermoconducting fluid
Autorzy:
Perelomova, A.
Powiązania:
https://bibliotekanauki.pl/articles/1938590.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska
Tematy:
non-stationary thermal self-focusing of an acoustic beam
shock acoustic wave
thermal lens
Opis:
Non-stationary thermal self-action of a periodic or impulse acoustic beam containing shock fronts in a thermoconducting Newtonian fluid is studied. Self-focusing of a saw-tooth periodic and impulse sound is considered, as well as that of a solitary shock wave which propagates with the linear sound speed. The governing equations of the beam radius are derived. Numerical simulations reveal that the thermal conductivity weakens the thermal self-action of the acoustic beam.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2016, 20, 2; 219-230
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność na szok termiczny kruszyw grubych przeznaczonych do mieszanek mineralno-asfaltowych
Resistance to thermal shock of coarse aggregate for asphalt mixture
Autorzy:
Wasilewska, M.
Zaśkiewicz, S.
Błażejowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/145142.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
szok termiczny
kruszywa grube
mieszanka mineralno-asfaltowa
thermal shock
coarse aggregate
asphalt mixture
Opis:
W artykule przedstawiono wyniki badań odporności na szok termiczny kruszyw grubych. Dodatkowo oznaczono ich nasiąkliwość, gęstość, odporność na rozdrabnianie i mrozoodporność w wodzie. Wykazano, że strata wytrzymałości VLA w przypadku poddanych szoku termicznemu kruszyw jest w zakresie od 0 do 10 %. Nie wykazano istotnej korelacji pomiędzy nasiąkliwością i mrozoodpornością a odpornością na szok termiczny. Zauważono natomiast różnice zachodzące na powierzchni kruszyw w wyniku poddawania ich oddziaływaniu wysokiej temperatury, które są związane z charakterystyką petrograficzną skał.
The article presents the results of resistance to thermal shock of coarse aggregates. In addition, results of water absorption, density and resistance to freezing and thawing were concluded. It has been shown that the loss of strength VLA subjected to thermal shock aggregates is in the range from 0 to 10 %. There was no significant correlation between water absorption, resistance freezing and thawing and resistance to thermal shock. It is noted that the differences in aggregate after test are related to the petrographic rock.
Źródło:
Drogownictwo; 2016, 10; 327-332
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The experimental and theoretical investigations of damage development and distribution in double-forged tungsten under plasma irradiation-initiated extreme heat loads
Autorzy:
Väli, B.
Laas, T.
Paju, J.
Shirokova, V.
Paduch, M.
Gribkov, V. A.
Demina, E. V.
Pimenov, V. N.
Makhlaj, V. A.
Antonov, M.
Powiązania:
https://bibliotekanauki.pl/articles/148167.pdf
Data publikacji:
2016
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
divertor material
nuclear fusion
off-normal events
thermal shock
tungsten
Opis:
The influence of extreme heat loads, as produced by a multiple pulses of non-homogeneous flow of slow plasma (0.1–1 keV) and fast ions (100 keV), on double-forged tungsten (DFW) was investigated. For generation of deuterium plasma and fast deuterons, plasma-focus devices PF-12 and PF-1000 are used. Depending on devices and conditions, the power flux density of plasma varied in a range of 107–1010 W/cm2 with pulse duration of 50–100 ns. Power flux density of fast ions was 1010–1012 W/cm2 at the pulse duration of 10–50 ns. To achieve the combined effect of different kind of plasmas, the samples were later irradiated with hydrogen plasma (105 W/cm2, 0.25 ms) by a QSPA Kh-50 plasma generator. Surface modification was analysed by scanning electron microscopy (SEM) and microroughness measurements. For estimation of damages in the bulk of material, an electrical conductivity method was used. Investigations showed that irradiation of DFW with multiple plasma pulses generated a mesh of micro- and macrocracks due to high heat load. A comparison with single forged tungsten (W) and tungsten doped with 1% lanthanum-oxide (WL10) reveals the better crack-resistance of DFW. Also, sizes of cells formed between the cracks on the DFW’s surface were larger than in cases of W or WL10. Measurements of electrical conductivity indicated a layer of decreased conductivity, which reached up to 500 µm. It depended mainly on values of power flux density of fast ions, but not on the number of pulses. Thus, it may be concluded that bulk defects (weakening bonds between grains and crystals, dislocations, point-defects) were generated due to mechanical shock wave, which was generated by the fast ions flux. Damages and erosion of materials under different combined radiation conditions have also been discussed.
Źródło:
Nukleonika; 2016, 61, 2; 169-177
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies