Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "thermal oil" wg kryterium: Temat


Tytuł:
Analiza emisji zanieczyszczeń w wyniku wytwarzania energii cieplnej
Analysis of Emission of Pollution Resulting from Thermal Energy Production
Autorzy:
Noch, T.
Mikołajczewska, W.
Wesołowska, A.
Friedberg, A.
Powiązania:
https://bibliotekanauki.pl/articles/1813745.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
energetyka cieplna
środowisko
spalanie
emisja zanieczyszczeń
olej opałowy
kotłownia
moc
pompa ciepła
OZE
ochrona środowiska
thermal power engineering
environment
emission of pollution
heating oil
boiler
power
heat pump
renewable energy
environment protection
Opis:
W opracowaniu przedmiotem badań jest wytwarzanie energii cieplnej. W wyniku tego zjawiska następuje emisja zanieczyszczeń do atmosfery. Wielkość emisji uzależniona jest od rodzaju i ilości spalanego paliwa. W pracy przedstawiono parametry techniczno-technologiczne urządzeń energetyki cieplnej wykorzystywane w procesie badawczym. W obiekcie eksploatowane są dwa kotły Paromat-Simplex z palnikami Weishaupt L5T D oraz jeden kocioł Paromat ER ND z palnikiem Weishaupt L1Z-B. W pracy dokonano obliczeń wielkości i parametrów emisji. Przeprowadzono badania i obliczenia stężeń emitowanych zanieczyszczeń dla kotłowni olejowej wodno-parowej, eksploatowanej przez obiekt zlokalizowany w Gdańsku Stogach. Badania dotyczą również wykorzystania źródeł energii odnawialnej. W wyniku przeprowadzonych badań porównawczych z zastosowaniem kotła Pilewang Gizex – PM stwierdzono, że oddziaływanie spalania słomy na stan czystości powietrza atmosferycznego jest mniej negatywne niż spalania węgla. Bilans emisji dwutlenku węgla podczas spalania biomasy jest zerowy, gdyż wytworzona jego ilość jest równoważna ilości CO2 pobranej przez roślinę podczas jej wzrostu. Analizą objęto również współpracę kotłowni z zespołem pomp ciepła. System hybrydowy uwzględnia różną moc zainstalowaną w pompach ciepła w granicach Qpc = 13,5-67,5 kW. Moc szczytowa kotłów jest równa Qhybr. = 262,5 kW. Zastosowanie pomp ciepła zmniejszy emisję dwutlenku węgla, odpowiednio dla QPC = 67,5 kW o ∆BCO2 = 33 Mg/a oraz dla QPC = 13,5 kW o ∆BCO2 = 6,6 Mg/a. Z uwagi na to, że badany obiekt zlokalizowany jest na terenie Nadmorskiego Parku Krajobrazowego, wskazane jest możliwie największe ograniczenie emisji zanieczyszczeń z kotłowni (dwutlenku węgla, tlenków siarki, tlenków azotu). Wykorzystanie odnawialnych źródeł energii przez lokalną energetykę cieplną jest korzystne dla ochrony środowiska.
The research is related to thermal energy production and related air pollutions. As a result of this process, emission of pollution to the atmosphere occurs. The effect of pollution depends on the sort and amount of combusted fuel. Technical and technological parameters of thermal energy installations, which have been used in the research process, have been presented. In the building there are two Paromat-Simplex boilers with Weishaupt L5T D burners. In addition to this, a boiler Paromat ER ND with Weishaupt L1Z-B burner is installed. The boilers characteristics are discussed. The influence of thermal energy sources on the environment has been taken into account. Calculations of the volume and parameters of emission have been conducted. The research also concerns the use of renewable energy. As a result of the comparative research with the application of Pilewang Gizex – PM boiler it was found that the influence of straw combustion on the quality of air is less negative than coal combustion. Carbon dioxide emission of biomass combustion is neglected because its amount equals the amount of CO2 absorbed by a plant during its growth. The analysis includes also the hybrid system of a boiler with a set of heat pumps in the power range Qpc = 13,5-67,5 kW. Maximum power of boilers is Qhybr. = 262,5 kW. The application of heat pumps reduces carbon dioxide emission: for QPC = 67,5 kW reduction is ∆BCO2 = 33 Mg/a and for QPC = 13,5 kW it correspond to ∆BCO2 = 6,6 Mg/a. Due to the fact that the object being the subject of the research is located in the Coastal Landscape Park (pol. Nadmorski Park Krajobrazowy) it is advisable to significantly reduce emission of pollution from boilers (carbon dioxide, sulfur oxides, nitrogen oxides). The application of renewable sources of energy by local thermal power engineering is favorable for the protection of the environment.
Źródło:
Rocznik Ochrona Środowiska; 2018, Tom 20, cz. 2; 1181-1198
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of chromatography to the analysis of quality of RME type biofuels obtained from pure, fresh rapeseed oil and from the waste (previously fried) oil of the same origin
Zastosowanie chromatografii do analizy jakosci biopaliw typu RME uzyskanych z oleju czystego oraz zuzytego
Autorzy:
Wcislo, G.
Strzelczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/793751.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
biodiesel fuel
biofuel
fatty acid methyl ester
rapeseed methyl ester
gas chromatography
diesel engine
thermal condition
physical property
chemical property
rapeseed oil
transesterification process
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Burial and thermal history of the Lower Palaeozoic petroleum source rocks at the SW margin of the East European Craton (Poland)
Autorzy:
Botor, Dariusz
Golonka, Jan
Anczkiewicz, Anneta A.
Dunkl, István
Papiernik, Bartosz
Zając, Justyna
Guzy, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/191816.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
maturity modelling
shale gas
shale oil
burial history
thermal history
Palaeozoic
East European Craton
Opis:
Thermal maturity modelling was carried out in over sixty wells along the SW margin of the East European Craton (EEC). The burial and thermal history modelling of the EEC, using thermochronological data, allowed the construction of burial history maps showing its geological development in the Phanerozoic. These results have proved that the Ordovician and Silurian source rocks occurring at the SW margin of the EEC reached a maximum palaeotemperature in the Palaeozoic, mainly during Devonian-Carboniferous time and at the latest during the Silurian in the most westerly part of this margin, along the Teisseyre-Tornquist Zone. In Mesozoic and Cainozoic time, the Ordovician and Silurian strata generally were subjected to cooling or to very minor heating, certainly below the Variscan level. The maximum burial and maximum temperature of the Ediacaran-Lower Palaeozoic strata were reached during the Early Carboniferous in the Baltic Basin and during the Late Carboniferous in the Lublin area, and even in the Early Permian in the SE corner of the Lublin Basin. Thus, the main period of maturation of organic matter and hydrocarbon generation in the Ordovician and Silurian source rocks was in the Late Palaeozoic (mainly Devonian-Carboniferous) and in the westernmost zone along the Teisseyre-Tornquist line at the end of the Silurian.
Źródło:
Annales Societatis Geologorum Poloniae; 2019, 89, 2; 121-152
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
By-products from thermal processing of rubber waste as fuel for the internal combustion piston engine
Autorzy:
Chwist, Mariusz
Pyrc, Michał
Gruca, Michał
Szwaja, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/2097462.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
pyrolysis oil
thermal conversion
biocrude
diesel engine
alternative fuels
olej popirolityczny
konwersja termiczna
silnik diesla
paliwa alternatywne
Opis:
The article presents results of investigation on the combustion of a mixture of pyrolysis oil from tires and regular fuel in the internal combustion reciprocating piston engine. The tested fuel consisted of: diesel fuel and pyrolysis oil at amount of 10% by volume. The tests were carried out on a single-cylinder naturally aspirated compression-ignition engine. The engine was equipped with a common rail fuel injection system and an electronic control unit that allowed changing injection timing. A comparative analysis of pressure-volume charts for the reference fuel, which was diese fuel, and for a mixture of diesel with 10% addition of pyrolysis oil was carried out. Injector characteristics for the reference fuel and the mixture were determined. Engine efficiency for both fuels was also determined. Unrepeatability of the engine work cycles for the diesel fuel and the tested mixture was calculated. Finally, exhaust toxic emission was analyzed. It was found that the pyrolysis oil can be used as valuable additive to regular diesel fuel at amount up to 10%, however, toxic exhaust gases emission was increased.
Źródło:
Combustion Engines; 2020, 59, 2; 11--18
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cargo ships’ heat demand - operational experiment
Autorzy:
Bocheński, Damian
Kreft, Dominik
Powiązania:
https://bibliotekanauki.pl/articles/1573801.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
heating system
heat demand
steam
thermal oil
Opis:
The paper presents the results of an experiment conducted on two cargo ships – a 5300 TEU container with a steam heating system and a 7500 dwt general cargo ship with a thermal oil system. On both ships research has been carried out using specially designed measuring equipment. After gathering data about flow velocity and temperatures (steam/ cooling water/ thermal oil/ seawater/ outside air), calculations have been done, resulting in histograms. For both types of histograms (heat demand and service time), the probability density function was fitted, using the K-S statistical test. The last step was comparison of the probability distribution mean to seawater and the outside air temperatures by linear regression and the coefficient of determination. The dependencies between the mentioned temperatures and heat demand were noted.
Źródło:
Polish Maritime Research; 2020, 4; 60-66
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka pomiarowa kotła na biomasę chłodzonego olejem w instalacji ORC
Experimental investigation of the biomass boiler cooled with thermal oil in ORC installation
Autorzy:
Kamiński, T.
Kardaś, D.
Powiązania:
https://bibliotekanauki.pl/articles/172926.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kocioł na biomasę
chłodzenie olejem
instalacja ORC
sprawność cieplna
biomass boiler
cooling with thermal oil
ORC installation
thermal efficiency
Opis:
W pracy przedstawiono wyniki badań eksperymentalnych stanowiska kotłowego należącego do laboratorium mikrosiłowni Instytutu Maszyn Przepływowych. Celem pracy było wyznaczenie bilansów energii kotła opalanego biomasą, którego zadaniem jest dostarczanie ciepła dla eksperymentalnej instalacji do produkcji ciepła i prądu w mikroskali. Specyfika mikrosiłowni polega na zastosowaniu turbiny parowej w tej skali urządzeń do produkcji prądu, co powoduje nietypowe wymaganie dotyczące kotła. Ze względu na te wymogi zastosowano olej termalny jako medium odbierające ciepło od spalin. W pracy przedstawiono charakterystyki cieplne kotła sporządzone na podstawie serii pomiarów. Badania kotła prowadzono dla rożnych wydatków paliwa, ilości powietrza oraz strumieni masy czynnika chłodzącego. Na podstawie pomiarów sporządzono wykresy parametrów chemicznych i cieplnych dla rożnych nastaw kotła.
The aim of the article was to present the testing results and the analysis of performance characteristics of a small-scale biomass-fired boiler, cooled with thermal oil. This boiler is a part of the laboratory installation for combined production of heat and electric power in micro-scale (micro CHP) in the Szewalski Institute of Fluid-Flow Machinery in Gdańsk. Both, the oil-cooled boiler and the micro CHP system, are the untypical solution in the field of electric power production. The measurements were performed for different air, oil and fuel mass flow rates.
Źródło:
Archiwum Energetyki; 2012, 42, 2; 49-57
0066-684X
Pojawia się w:
Archiwum Energetyki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design, preparation and properties of novel flame retardant thermosetting vinyl ester copolymers based on castor oil and industrial dipentene
Autorzy:
Mao, W.
Li, S.
Li, M.
Huang, K.
Xia, J.
Powiązania:
https://bibliotekanauki.pl/articles/777956.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
castor oil
vinyl ester resin
copolymers
flammability
thermal properties
Opis:
A novel bio-based flame-retardant thermosetting vinyl ester resin monomer was synthesized from castor oil. The chemical structures of the monomer was characterized by FTIR and 1H-NMR. In order to improve its rigidity and expand its application in the field of bio-based materials, it was mixed with certain proportions of another reactive bio-based VER monomer, which had rigid and strong polar groups, and then a series of copolymers were prepared with thermal curing method. Then their tensile property, hardness, morphology of fractured surface, flame retardant property, DMA and thermostability were all investigated. The results indicated that the copolymers had relatively high tensile strength of 11.2 MPa, and the limiting oxygen index is above 23% in all prepared copolymers. DMA demonstrates that the glass transition temperature of the cured resins is up to 56.1°C. Thermogravimetric analysis shows that the copolymers have excellent thermal stability.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 3; 1-8
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research on helical coil biomass boiler with oil as a heating fluid
Autorzy:
Turzyński, T.
Kardaś, D.
Powiązania:
https://bibliotekanauki.pl/articles/175317.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal oil
boiler
helical coil biomass
Opis:
The aim of the paper is to present the results of experimental research conducted on helical coil biomass boiler with oil as a heating fluid, which is a central unit of co generative micro powerplant designed and tested at the Institute of Fluid-Flow Machinery in Gdańsk. Experimental data has been used to work out characteristics of the device in terms of power, efficiency and oil parameters for moderate/high excess air numbers and fuel flow rates. Furthermore, during the research the authors came across various obstacles, which can be easily eliminated in the future prototypes by applying presented changes in construction.
Źródło:
Transactions of the Institute of Fluid-Flow Machinery; 2013, 125; 55-65
0079-3205
Pojawia się w:
Transactions of the Institute of Fluid-Flow Machinery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of Efficiency of Steam-Thermal Treatment of High-Viscous Oil Formations Using Downhole Electric Steam Generators
Autorzy:
Malarev, Vadim
Kopteva, Alexandra
Koptev, Vladimir
Gotsul, Yulia
Powiązania:
https://bibliotekanauki.pl/articles/1839095.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
high-viscous oil
steam generator
oil recovery
thermal treatment
environmental safety
Opis:
The presented work investigates a method for developing hard-to-recover hydrocarbon reserves based on a downhole electrothermal steam generator, which is distinguished by energy efficiency, resource conservation and environmental safety. The paper presents an overview of downhole electro-thermal equipment that improves the quality of thermal treatment of the bottom-hole zone of high-viscous oil formations by separating steam in an electric steam generator and increasing its dryness, wherein thermal energy in the oil-formation medium affects all its components and completely changes ties and filtration conditions. This is expressed in a decrease in the viscosity of oil, its increased mobility, weakening of structural-mechanical properties, improvement of the conditions for capillary imbibition, and, as a result, an increase in the displacement factor and the final oil recovery. A simulation of the reservoir temperature field was performed by setting the heat flow in the ANSYS software package to understand the thermal processes in the steam generator and to more accurately determine the necessary heating parameters for a given water flow rate. The temperature field of the reservoir simulation after the heat treatment of the bottom-hole zone was conducted in the software package Femlab 3.5. The proposed simulation models can help in the development of the physical model and further research. This technology is environmentally friendly and does not emit emissions into the atmosphere.
Źródło:
Journal of Ecological Engineering; 2021, 22, 2; 17-24
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of high-viscosity oil production technology
Autorzy:
Kondrat, O.
Powiązania:
https://bibliotekanauki.pl/articles/299267.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
well
high-viscosity oil
operation
stimulation
thermal effect
hydrocarbon solvent
surfactants
gas-lift
rod pumping unit
Opis:
According to the results of the laboratory and analytical studies and research-and-industrial operations, it is established the efficiency of complex use of thermal methods, hydrocarbon solvents and surfactants for the effect on high-viscosity oil and it is suggested the technology for high-viscosity oil wells stimulation.
Źródło:
AGH Drilling, Oil, Gas; 2014, 31, 1; 73-89
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości oceny wybranych właściwości silnikowych olejów smarowych za pomocą metod termoanalitycznych
The prospects of evaluation of selected engine lubricating oil parameters with the use of thermoanalysis methods
Autorzy:
Rostek, E.
Babiak, M.
Powiązania:
https://bibliotekanauki.pl/articles/133047.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
oleje silnikowe
oleje smarowe
analiza termiczna
engine lubrication oil
thermal analysis
Opis:
Jednym z ważniejszych procesów, mającym wpływ m.in. na trwałość i niezawodność silnika oraz na zużycie paliwa i emisję toksycznych składników spalin, jest proces smarowania wszystkich węzłów tarcia. Ze względu na sposób i charakter smarowania tulei cylindrowej nieuniknione jest przedostawanie się części oleju smarowego do komory spalania, przez co poza samym procesem smarowania, bierze on również częściowo udział w procesie spalania. W artykule przedstawiono możliwości wykorzystania metod termoanalitycznych do określenia wybranych właściwości oleju takich jak np. temperatura krystalizacji, temperatura samozapłonu, produkty rozkładu termicznego.
One of the most important process in the internal combustion engine, which has the influence on durability and reliability, but also on fuel consumption and emission, is the lubrication of all engine kinematic pairs. For the sake of cylinder liner lubrication method and character, it is unavoidable to get the lubricating oil to the combustion chamber. As a consequence the lubricating oil takes part in the combustion process. In the paper the prospects of evaluation of selected engine lubricating oil parameters, such as cristallization temperature, self ignition temperature or thermal decomposition products, are presented.
Źródło:
Combustion Engines; 2013, 52, 3; 903-909
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of Particle Size and Ramie Fiber Ratio on Hybrid Bio Panel Production from Oil Palm Trunk as Thermal Insulation Materials
Autorzy:
Mawardi, Indra
Nurdin
Fakhriza
Rizal, Samsul
Aprilia, Sri
Faisal, Muhammad
Jaya, Ramadhansyah Putra
Powiązania:
https://bibliotekanauki.pl/articles/2202371.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
oil palm trunk
hybrid bio panel
thermal insulation
particle size
ramie fibre ratio
RSM
response surface methodology
Opis:
The abundant availability of waste oil palm trunks is one of the potential fibers for new thermal insulation materials. While focusing on the manufacturing of thermal insulation materials, the main points to be considered are particle size, reinforcement fiber ratio, and press durations, besides binders type and temperature. This study aimed to optimize the manufacturing process of hybrid bio panels based on oil palm trunks as thermal insulation material. The response surface methodology (RSM), with a Box-Behnken Design (BBD), was used to model and optimize the manufacturing process variables. A total of 17 hybrid bio panels were in operation and the independent variables used were particle size, ramie ratio, and press duration. The dependent variables were water absorption, thickness swelling, MOR, and thermal conductivity. The hybrid bio panel obtained under the optimum conditions was characterized by thermogravimetric analysis to observe thermal stability. On the basis of analysis of variance and the contour plot, it was discovered that the interaction between particle size and ramie fiber ratio was a significant variable to optimize hybrid bio panel manufacture. The thermal resistance and modulus of rupture of hybrid bio panels also improved with higher particle size and ramie fiber ratio. The optimum manufacturing process was obtained at OPT particle size of 0.248 mm, ramie fiber ratio of 19.775, and press duration of 25 min. This condition produces a thermal conductivity of 0.079 W/mK, modulus of rupture of 17.702 MPa, water absorption of 54.428%, and thickness swelling of 21.974%. In addition, the hybrid bio panel resulted in thermal stability of 341 °C.
Źródło:
Journal of Ecological Engineering; 2023, 24, 2; 39--49
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Overall color parameter as a parameter determining the level of oxidation of olive oil
Autorzy:
Różańska, Anna
Namieśnik, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/1179567.pdf
Data publikacji:
2017
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
analytical chemistry
edible oils
food analysis
olive oil
overall color parameter
thermal degradation
Opis:
Edible fats are an important part of a human daily diet. They have a significant effect on the proper functioning of the human body. During frying, the oil is chemically modified and the fats consumed should have the highest oxidation stability. The subject of the study were samples of olive oil bought at local markets in Gdansk. Samples were heated at 20 °C, 60 °C, 100 °C, 140 °C and 180 °C. The aim of the study was to determine the differences in the level of oxidation of selected edible oils which were heated. Studies were performed using spectrophotometric techniques. The dependence between the level of oxidation of the olive oil samples and the value of the overall color parameter was determined. Based on the results obtained, the lower value of the color parameter overall, means that the oil is more degraded. The used procedure is characterized by an uncomplicated and low cost consuming stage of the preparation of the sample for analysis and also enables rapid analysis.
Źródło:
World Scientific News; 2017, 75; 81-88
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physical properties improvement of the diesel engine lubricant oil reinforced nanomaterials
Autorzy:
Hadi, N. J.
Al-Hussain, R. K. A.
Powiązania:
https://bibliotekanauki.pl/articles/95364.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
lubricant oil
nanofluids
viscosity
thermal conductivity
thermal images
tribology
oleje smarowe
nanopłyny
lepkość
przewodność cieplna
termogram
tribologia
Opis:
This research focuses on the effect of nanomaterials on the physical properties of a local Iraqi lubricant oil (20W-50), which is widely used in diesel engines. The concentrations of 0.001, 0.2 and 0.5 wt% of Al2O3 NPs and CNT are dispersed in the oil with the help of a suitable surfactant using a magnetic stirrer and a sonication process. The density, surface tension, dynamic viscosity, kinematic viscosity, flash point, fire point, pour point, thermal conductivity, thermal images, wear and the coefficient of friction of the oil with and without nanomaterials are tested. The results were shown that the higher concentrations of NPs, the better properties for the engine oil. The density for Al2O3 nanooil indicates a small change at 0.001 and 0.2 wt%, and a decrease at 0.5 wt% ratio. Also, the density of CNT oil shows a slight change at 0.001and then decreasing at 0.2 and 0.5 ratios. In addition, the surface tension of both nanooils are increased. The dynamic viscosity slightly change with an addition of the NPs especially at 20°C and 30°C. Also, there is a convergence in the viscosity values between base and nanooils at 40°C and 50°C. Also, the dynamic viscosity indicates shear thickening behavior at low shear rate, while in the high shear rate the viscosity attempts to be more stable. The kinematic viscosity increases with an increased concentration of the NPs at 40°C and 100°C for both nanooils. The flash and fire point are increasing for both nanooils and Al2O3 nanooil indicates a lower pour point than that of CNT oil. CNT oil indicates higher dissipating heat friction and thermal conductivity than that of Al2O3 nanooil. Thermal images are supported by thermal conductivity and flash point behavior, while the tribology tests are compatible with viscosity behavior. A significant reduction in the coefficient of friction and wear loss is produced for both nanooils.
Źródło:
Journal of Mechanical and Energy Engineering; 2018, 2, 3; 233-244
2544-0780
2544-1671
Pojawia się w:
Journal of Mechanical and Energy Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie kinetyki termooksydacji mineralnych i syntetycznych olejów transformatorowych
Kinetics of thermal oxidation of mineral and synthetic transformer oils
Autorzy:
Molenda, J.
Cichawa, M.
Powiązania:
https://bibliotekanauki.pl/articles/257208.pdf
Data publikacji:
2007
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
olej transformatorowy
termooksydacja
starzenie oleju
kinetyka termooksydacji
transformer oil
thermal oxidation
oil ageing
kinetics of thermal oxidation
Opis:
W artykule porównano kinetykę terooksydacji mineralnych i syntetycznych olejów transformatorowych, zbadaną na podstawie wyników oznaczania liczby kwasowej oraz analizy widm IR. Obróbka matematyczna uzyskanych widm pozwoliła na wyodrębnienie nakładających się pasm spektralnych oraz obliczenie pola powierzchni pasma analitycznego, charakterystycznego dla produktów termooksydacji. Badania przeprowadzono dla laboratoryjnie terooksydowanych próbek oleju mineralnego (Nytro 10GBN) i estrowego (Midel 7131). Na podstawie przeprowadzonych badań stwierdzono, że kinetykę powstawania tlenoorganicznych produktów starzenia oleju mineralnego można opisać modelem liniowym, natomiast kinetykę powstawania związków karboksylowych w oleju estrowym modelem wielomianowym trzeciego stopnia.
In this paper kinetics of thermal oxidation of mineral (Nytro 10GBN) and synthetic transformer oils (Midel 7131) were comparised. Research was based on results of acid number determination and analysis of IR spectrum. Mathematical describe of obtained spectrum allowed to separate overlapping spectral bands and calculate of analytical band's field, characteristic for thermal oxidation products. It has been found that the kinetics of oxygen-containing products formation can be described by linear model, and the kinetics of carboxylic compounds formation in oil can be described by polynominal model of third degree.
Źródło:
Problemy Eksploatacji; 2007, 2; 119-128
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies