Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "thermal oil" wg kryterium: Temat


Tytuł:
Cargo ships’ heat demand - operational experiment
Autorzy:
Bocheński, Damian
Kreft, Dominik
Powiązania:
https://bibliotekanauki.pl/articles/1573801.pdf
Data publikacji:
2020
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
heating system
heat demand
steam
thermal oil
Opis:
The paper presents the results of an experiment conducted on two cargo ships – a 5300 TEU container with a steam heating system and a 7500 dwt general cargo ship with a thermal oil system. On both ships research has been carried out using specially designed measuring equipment. After gathering data about flow velocity and temperatures (steam/ cooling water/ thermal oil/ seawater/ outside air), calculations have been done, resulting in histograms. For both types of histograms (heat demand and service time), the probability density function was fitted, using the K-S statistical test. The last step was comparison of the probability distribution mean to seawater and the outside air temperatures by linear regression and the coefficient of determination. The dependencies between the mentioned temperatures and heat demand were noted.
Źródło:
Polish Maritime Research; 2020, 4; 60-66
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Burial and thermal history of the Lower Palaeozoic petroleum source rocks at the SW margin of the East European Craton (Poland)
Autorzy:
Botor, Dariusz
Golonka, Jan
Anczkiewicz, Anneta A.
Dunkl, István
Papiernik, Bartosz
Zając, Justyna
Guzy, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/191816.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
maturity modelling
shale gas
shale oil
burial history
thermal history
Palaeozoic
East European Craton
Opis:
Thermal maturity modelling was carried out in over sixty wells along the SW margin of the East European Craton (EEC). The burial and thermal history modelling of the EEC, using thermochronological data, allowed the construction of burial history maps showing its geological development in the Phanerozoic. These results have proved that the Ordovician and Silurian source rocks occurring at the SW margin of the EEC reached a maximum palaeotemperature in the Palaeozoic, mainly during Devonian-Carboniferous time and at the latest during the Silurian in the most westerly part of this margin, along the Teisseyre-Tornquist Zone. In Mesozoic and Cainozoic time, the Ordovician and Silurian strata generally were subjected to cooling or to very minor heating, certainly below the Variscan level. The maximum burial and maximum temperature of the Ediacaran-Lower Palaeozoic strata were reached during the Early Carboniferous in the Baltic Basin and during the Late Carboniferous in the Lublin area, and even in the Early Permian in the SE corner of the Lublin Basin. Thus, the main period of maturation of organic matter and hydrocarbon generation in the Ordovician and Silurian source rocks was in the Late Palaeozoic (mainly Devonian-Carboniferous) and in the westernmost zone along the Teisseyre-Tornquist line at the end of the Silurian.
Źródło:
Annales Societatis Geologorum Poloniae; 2019, 89, 2; 121-152
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
By-products from thermal processing of rubber waste as fuel for the internal combustion piston engine
Autorzy:
Chwist, Mariusz
Pyrc, Michał
Gruca, Michał
Szwaja, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/2097462.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
pyrolysis oil
thermal conversion
biocrude
diesel engine
alternative fuels
olej popirolityczny
konwersja termiczna
silnik diesla
paliwa alternatywne
Opis:
The article presents results of investigation on the combustion of a mixture of pyrolysis oil from tires and regular fuel in the internal combustion reciprocating piston engine. The tested fuel consisted of: diesel fuel and pyrolysis oil at amount of 10% by volume. The tests were carried out on a single-cylinder naturally aspirated compression-ignition engine. The engine was equipped with a common rail fuel injection system and an electronic control unit that allowed changing injection timing. A comparative analysis of pressure-volume charts for the reference fuel, which was diese fuel, and for a mixture of diesel with 10% addition of pyrolysis oil was carried out. Injector characteristics for the reference fuel and the mixture were determined. Engine efficiency for both fuels was also determined. Unrepeatability of the engine work cycles for the diesel fuel and the tested mixture was calculated. Finally, exhaust toxic emission was analyzed. It was found that the pyrolysis oil can be used as valuable additive to regular diesel fuel at amount up to 10%, however, toxic exhaust gases emission was increased.
Źródło:
Combustion Engines; 2020, 59, 2; 11--18
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Comparative Analysis of Ecological Lubricants
Analiza porównawcza proekologicznych środków smarowych
Autorzy:
Drabik, Jolanta
Kozdrach, Rafał
Wolszczak, Marek
Michalski, Janusz
Duszyński, Grzegorz
Piątkowski, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/2200630.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
lubricant based on Crambe Abyssinica seed oil
thermal stress
mechanical stress
wear test
oxidation resistance
complex modulus
środek smarowy na bazie oleju z nasion Crambe Abyssinica
wymuszenia cieplne
wymuszenia mechaniczne
test zużyciowy
odporność na utlenianie
kompleksowy moduł zespolony
Opis:
On the base of rheological tests, the resistance to deformation of lubricants elaborated on the base of Crambe abyssinica seed oil was evaluated. The developed lubricants were subjected to thermal and mechanical stresses, which allowed the evaluation of their resistance to the oxidation process and anti-wear properties. After tests, the rheological properties of tested lubricants were carried out by determining the complex modulus in oscillation tests. On the base of the rheological parameter, the resistance of lubricants to deformation and change of this indicator under the influence of thermal and mechanical stresses was evaluated. The carried out analysis of changes in the G* complex modulus showed that the tested lubricants show a different resistance to deformation depending on their type and depending on the impact of the extortion. It was found that the rheological index (complex modulus G*) determined in oscillation tests can be a successful criterion for the quality of pro-ecological lubricants.
Na podstawie testów reologicznych oceniono odporności na deformację środków smarowych opracowanych na bazie oleju z nasion Crambe abyssinica. Opracowane środki smarowe poddano działaniu wymuszeń cieplnych i mechanicznych, co umożliwiło ocenę ich odporności na proces utleniania i właściwości przeciwzużyciowych. Po przeprowadzonych testach wyznaczono właściwości reologiczne badanych środków smarowych, wyznaczając moduł zespolony w testach oscylacyjnych. Na podstawie parametru reologicznego oceniono odporność smarów na odkształcenia i zmianę tego wskaźnika pod wpływem wymuszeń cieplnych i mechanicznych. Przeprowadzona analiza zmian modułu zespolonego G* wykazała, że badane środki smarowe wykazują zróżnicowaną odporność na odkształcenia w zależności od ich rodzaju oraz w zależności od oddziaływania wymuszeń. Stwierdzono, że wskaźnik reologiczny (moduł zespolony G*) wyznaczony w testach oscylacyjnych może z powodzeniem stanowić kryterium jakości proekologicznych środków smarowych.
Źródło:
Tribologia; 2022, 4; 17--22
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Comparative Analysis of Prepared Mixtures of Crambe Abyssinica Seed Oil with Mineral and Synthetic Oil
Analiza porównawcza opracowanych mieszanin oleju z nasion Crambe Abyssinica z olejem mineralnym i syntetycznym
Autorzy:
Drabik, Jolanta
Kozdrach, Rafał
Wolszczak, Marek
Iłowska, Jolanta
Duszyński, Grzegorz
Piątkowski, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/1857783.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
vegetable oil from Crambe Abyssinica seeds
mixture of vegetable and mineral oil
mixture of vegetable and synthetic oil
oxidation stability
antiwear properties
Raman spectrum analysis
thermal extortions
mechanical extortions
olej roślinny z nasion Crambe Abyssinica
mieszanina oleju roślinnego z mineralnym
mieszanina oleju roślinnego z syntetycznym
stabilność oksydacyjna
właściwości przeciwzużyciowe
spektroskopia Ramana
Opis:
The base oils must meet the high technical and ecological requirements for the raw materials used in the production of lubricants. The relevant useful properties can be obtained by mixing the vegetable oil with mineral or synthetic oil. The paper presents the results of tests of mixtures of oil obtained from Crambe Abyssinica seeds with mineral and synthetic oil. A variation of tested mixtures with regard to thermo-oxidative stability and antiwear properties were found. The mixtures with the most favourable properties were recommended as a base oils during the production of ecological lubricants.
Oleje bazowe muszą spełniać wysokie wymagania techniczne i ekologiczne stawiane surowcom wykorzystywanym do produkcji środków smarowych. Odpowiednie właściwości użytkowe można uzyskać przez mieszanie oleju roślinnego z olejem mineralnym lub syntetycznym. W pracy przedstawiono wyniki badań mieszanin oleju pozyskanego z nasion Crambe Abyssinica z olejem mineralnym i syntetycznym. Stwierdzono zróżnicowanie badanych mieszanin pod względem stabilności termooksydacyjnej i właściwości przeciwzużyciowych. Mieszaniny o najkorzystniejszych właściwościach rekomendowano jako oleje bazowe podczas wytwarzania ekologicznych środków smarowych.
Źródło:
Tribologia; 2020, 291, 3; 15-21
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wplyw ogrzewania nasion rzepaku na jakosc wytloczonego oleju
Autorzy:
Gorecka, A
Wroniak, M.
Krygier, K.
Powiązania:
https://bibliotekanauki.pl/articles/834096.pdf
Data publikacji:
2003
Wydawca:
Instytut Hodowli i Aklimatyzacji Roślin
Tematy:
olej virgin
obrobka termiczna
nasiona
stabilnosc oksydatywna
olej rzepakowy
jakosc oleju
tloczenie
virgin oil
thermal treatment
seed
oxidative stability
rapeseed oil
oil quality
pressing
Źródło:
Rośliny Oleiste - Oilseed Crops; 2003, 24, 2; 567-576
1233-8273
Pojawia się w:
Rośliny Oleiste - Oilseed Crops
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physical properties improvement of the diesel engine lubricant oil reinforced nanomaterials
Autorzy:
Hadi, N. J.
Al-Hussain, R. K. A.
Powiązania:
https://bibliotekanauki.pl/articles/95364.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
lubricant oil
nanofluids
viscosity
thermal conductivity
thermal images
tribology
oleje smarowe
nanopłyny
lepkość
przewodność cieplna
termogram
tribologia
Opis:
This research focuses on the effect of nanomaterials on the physical properties of a local Iraqi lubricant oil (20W-50), which is widely used in diesel engines. The concentrations of 0.001, 0.2 and 0.5 wt% of Al2O3 NPs and CNT are dispersed in the oil with the help of a suitable surfactant using a magnetic stirrer and a sonication process. The density, surface tension, dynamic viscosity, kinematic viscosity, flash point, fire point, pour point, thermal conductivity, thermal images, wear and the coefficient of friction of the oil with and without nanomaterials are tested. The results were shown that the higher concentrations of NPs, the better properties for the engine oil. The density for Al2O3 nanooil indicates a small change at 0.001 and 0.2 wt%, and a decrease at 0.5 wt% ratio. Also, the density of CNT oil shows a slight change at 0.001and then decreasing at 0.2 and 0.5 ratios. In addition, the surface tension of both nanooils are increased. The dynamic viscosity slightly change with an addition of the NPs especially at 20°C and 30°C. Also, there is a convergence in the viscosity values between base and nanooils at 40°C and 50°C. Also, the dynamic viscosity indicates shear thickening behavior at low shear rate, while in the high shear rate the viscosity attempts to be more stable. The kinematic viscosity increases with an increased concentration of the NPs at 40°C and 100°C for both nanooils. The flash and fire point are increasing for both nanooils and Al2O3 nanooil indicates a lower pour point than that of CNT oil. CNT oil indicates higher dissipating heat friction and thermal conductivity than that of Al2O3 nanooil. Thermal images are supported by thermal conductivity and flash point behavior, while the tribology tests are compatible with viscosity behavior. A significant reduction in the coefficient of friction and wear loss is produced for both nanooils.
Źródło:
Journal of Mechanical and Energy Engineering; 2018, 2, 3; 233-244
2544-0780
2544-1671
Pojawia się w:
Journal of Mechanical and Energy Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka pomiarowa kotła na biomasę chłodzonego olejem w instalacji ORC
Experimental investigation of the biomass boiler cooled with thermal oil in ORC installation
Autorzy:
Kamiński, T.
Kardaś, D.
Powiązania:
https://bibliotekanauki.pl/articles/172926.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kocioł na biomasę
chłodzenie olejem
instalacja ORC
sprawność cieplna
biomass boiler
cooling with thermal oil
ORC installation
thermal efficiency
Opis:
W pracy przedstawiono wyniki badań eksperymentalnych stanowiska kotłowego należącego do laboratorium mikrosiłowni Instytutu Maszyn Przepływowych. Celem pracy było wyznaczenie bilansów energii kotła opalanego biomasą, którego zadaniem jest dostarczanie ciepła dla eksperymentalnej instalacji do produkcji ciepła i prądu w mikroskali. Specyfika mikrosiłowni polega na zastosowaniu turbiny parowej w tej skali urządzeń do produkcji prądu, co powoduje nietypowe wymaganie dotyczące kotła. Ze względu na te wymogi zastosowano olej termalny jako medium odbierające ciepło od spalin. W pracy przedstawiono charakterystyki cieplne kotła sporządzone na podstawie serii pomiarów. Badania kotła prowadzono dla rożnych wydatków paliwa, ilości powietrza oraz strumieni masy czynnika chłodzącego. Na podstawie pomiarów sporządzono wykresy parametrów chemicznych i cieplnych dla rożnych nastaw kotła.
The aim of the article was to present the testing results and the analysis of performance characteristics of a small-scale biomass-fired boiler, cooled with thermal oil. This boiler is a part of the laboratory installation for combined production of heat and electric power in micro-scale (micro CHP) in the Szewalski Institute of Fluid-Flow Machinery in Gdańsk. Both, the oil-cooled boiler and the micro CHP system, are the untypical solution in the field of electric power production. The measurements were performed for different air, oil and fuel mass flow rates.
Źródło:
Archiwum Energetyki; 2012, 42, 2; 49-57
0066-684X
Pojawia się w:
Archiwum Energetyki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of high-viscosity oil production technology
Autorzy:
Kondrat, O.
Powiązania:
https://bibliotekanauki.pl/articles/299267.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
well
high-viscosity oil
operation
stimulation
thermal effect
hydrocarbon solvent
surfactants
gas-lift
rod pumping unit
Opis:
According to the results of the laboratory and analytical studies and research-and-industrial operations, it is established the efficiency of complex use of thermal methods, hydrocarbon solvents and surfactants for the effect on high-viscosity oil and it is suggested the technology for high-viscosity oil wells stimulation.
Źródło:
AGH Drilling, Oil, Gas; 2014, 31, 1; 73-89
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Termoanalitykal investigations of the edible oils and fats III. Kinetics of thermal-oxidative decomposition of corn oil
Termoanalityczne badania olejów i tłuszczów jadanych III. Kinetyka termoutleniajacego rozkładu oleju kukurydzianego
Autorzy:
Kowalski, B.
Powiązania:
https://bibliotekanauki.pl/articles/1402012.pdf
Data publikacji:
1990
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
edible oils
com oil
kinetics of oxidation
thermal analysis
differential scanning calorimetry
Opis:
Corn oil was oxidized in an atmosphere of oxygen in the cell of a Differential Scanning Calorimeter (DSC). From the outcoming heat flow curves obtained at different heating rates (P) the peak maximum temperatures were selected (T peak). From linear dependence lgβ = f(T⁻¹peak) the apparent activation energy and kinetic parameters for thermal-oxidative decomposition of oil were calculated.
Olej kukurydziany z obrotu handlowego utleniano tlenem w komorze pomiarowej różnicowego kalorymetru skanningowego (DSC) rejestrując zmiany przepływu ciepła kompensującego efekt energetyczny reakcji. Stosując różne szybkości ogrzewania reagującego układu z zarejestrowanych termogramów DSC obliczono energię aktywacji pozornej reakcji: olej + O₂ (nadmiar) r → produkty utleniania i rozkładu, oraz jej parametry kinetyczne. Uzyskane wyniki wykazały, że badany olej kukurydziany jest mniej odporny na rozkład termoutleniający niż stosowane wcześniej próbki handlowych olejów: rzepakowego, sojowego i słonecznikowego. Znaczne różnice w stabilności termoutleniającej badanych olejów: słonecznikowego i kukurydzianego przy podobnych składach kwasów tłuszczowych próbek sugerują, że nie ma podstaw do przeprowadzania prognoz odnośnie stabilności olejów w oparciu o ogólne wyniki analiz ich składu. Biorąc pod uwagę, że oleje handlowe są zwykle mieszankami różnych olejów uzyskiwanych wyników nie należy uogólniać na dany typ handlowo oznakowanego oleju. Jednakże otrzymywane w stosowanej procedurze pomiarów termoanalitycznych charakterystyki kinetyczne rozkładu termoutleniającego różnicują właściwości danych prób olejów, a zaproponowana metoda jest stosunkowo szybka i obiektywna tak, że stanowi ona cenne narzędzie badawcze.
Źródło:
Acta Alimentaria Polonica; 1990, 16(40), 1-2; 33-38
0137-1495
Pojawia się w:
Acta Alimentaria Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermoanalytical investigations of edible oils and fats. Part II Kinetics of thermo-oxidative decomposition of soybean and sunflower oils
Termoanalityczne badania olejów i tłuszczów jadalnych. Cz.II Kinetyka termoutleniającego rozkładu oleju sojowego i słonecznikowego
Autorzy:
Kowalski, B.
Kot, B.
Powiązania:
https://bibliotekanauki.pl/articles/1399530.pdf
Data publikacji:
1989
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
edible oils
soybean oil
sunflower oil
kinetics of oxidation
thermal analysis
differential scanning calorimetry
Opis:
Soybean (SBO) and sunflower (SFO) oils were oxidized in an atmosphere of oxygen in the cell of the Differential Scanning Calorimeter (DSC). The peak maximum temperatures on monitored differential heat flow curves were measured and used for the calculation of Arrhenius activation energy and kinetic parametres of the process.
Oleje sojowy (SBO) i słonecznikowy (SFO) utleniano w komorze kalorymetru skanningowego (DSC) tlenem przepływającym przez komorę z szybkością 100 cm³/min. Postęp reakcji śledzono rejestrując różnicowy przepływ ciepła kompensujący efekt energetyczny reakcji. Stosując różne szybkości ogrzewania reagującego układu (β) oznaczono z termogramów temperaturę maksimum piku (Tmax) Liniowe w półlogarytmicznym układzie współrzędnych zależności lg β = f(Tmax) pozwoliły na wyznaczenie wartości dlg ζ(dT⁻¹ max). Z otrzymanych danych obliczono energię aktywacji proce u otrzymując dla oleju sojowego ESBO = 62800 J/mol i słonecznikowego ESFO = 60700 J/mol. Wartości te zostały użyte do wyznaczenia temperaturowych zależności zmian stałych szybkości reakcji (k) i połówkowych czasów reakcji (τ) przyjmując że są to reakcje pierwszego rzędu. Sparametryzowane ilościowo ujęcie kinetyki procesu termoutleniania badanych olejów jest spójne z oznaczanymi metodą chromatografii gazowej zawartościami kwasów tłuszczowych w olejach. Otrzymane wyniki dyskutowano ze względu na chemizm wolnorodnikowego mechanizmu procesu auto utleniania lipidów. Wskazano na możliwość zastosowania wyznaczonych parametrów do oceny odporności olejów na rozkład termoutleniający oraz wykorzystania danych w obliczeniach projektowo-inżynieryjnych. Oceniono, że metoda DSC jest szczególnie użyteczna w badaniach tennoanalitycznych i kinetycznych tak złożonych układów jak oleje roślinne.
Źródło:
Acta Alimentaria Polonica; 1989, 15(39), 1; 55-62
0137-1495
Pojawia się w:
Acta Alimentaria Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of Efficiency of Steam-Thermal Treatment of High-Viscous Oil Formations Using Downhole Electric Steam Generators
Autorzy:
Malarev, Vadim
Kopteva, Alexandra
Koptev, Vladimir
Gotsul, Yulia
Powiązania:
https://bibliotekanauki.pl/articles/1839095.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
high-viscous oil
steam generator
oil recovery
thermal treatment
environmental safety
Opis:
The presented work investigates a method for developing hard-to-recover hydrocarbon reserves based on a downhole electrothermal steam generator, which is distinguished by energy efficiency, resource conservation and environmental safety. The paper presents an overview of downhole electro-thermal equipment that improves the quality of thermal treatment of the bottom-hole zone of high-viscous oil formations by separating steam in an electric steam generator and increasing its dryness, wherein thermal energy in the oil-formation medium affects all its components and completely changes ties and filtration conditions. This is expressed in a decrease in the viscosity of oil, its increased mobility, weakening of structural-mechanical properties, improvement of the conditions for capillary imbibition, and, as a result, an increase in the displacement factor and the final oil recovery. A simulation of the reservoir temperature field was performed by setting the heat flow in the ANSYS software package to understand the thermal processes in the steam generator and to more accurately determine the necessary heating parameters for a given water flow rate. The temperature field of the reservoir simulation after the heat treatment of the bottom-hole zone was conducted in the software package Femlab 3.5. The proposed simulation models can help in the development of the physical model and further research. This technology is environmentally friendly and does not emit emissions into the atmosphere.
Źródło:
Journal of Ecological Engineering; 2021, 22, 2; 17-24
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design, preparation and properties of novel flame retardant thermosetting vinyl ester copolymers based on castor oil and industrial dipentene
Autorzy:
Mao, W.
Li, S.
Li, M.
Huang, K.
Xia, J.
Powiązania:
https://bibliotekanauki.pl/articles/777956.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
castor oil
vinyl ester resin
copolymers
flammability
thermal properties
Opis:
A novel bio-based flame-retardant thermosetting vinyl ester resin monomer was synthesized from castor oil. The chemical structures of the monomer was characterized by FTIR and 1H-NMR. In order to improve its rigidity and expand its application in the field of bio-based materials, it was mixed with certain proportions of another reactive bio-based VER monomer, which had rigid and strong polar groups, and then a series of copolymers were prepared with thermal curing method. Then their tensile property, hardness, morphology of fractured surface, flame retardant property, DMA and thermostability were all investigated. The results indicated that the copolymers had relatively high tensile strength of 11.2 MPa, and the limiting oxygen index is above 23% in all prepared copolymers. DMA demonstrates that the glass transition temperature of the cured resins is up to 56.1°C. Thermogravimetric analysis shows that the copolymers have excellent thermal stability.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 3; 1-8
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of Particle Size and Ramie Fiber Ratio on Hybrid Bio Panel Production from Oil Palm Trunk as Thermal Insulation Materials
Autorzy:
Mawardi, Indra
Nurdin
Fakhriza
Rizal, Samsul
Aprilia, Sri
Faisal, Muhammad
Jaya, Ramadhansyah Putra
Powiązania:
https://bibliotekanauki.pl/articles/2202371.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
oil palm trunk
hybrid bio panel
thermal insulation
particle size
ramie fibre ratio
RSM
response surface methodology
Opis:
The abundant availability of waste oil palm trunks is one of the potential fibers for new thermal insulation materials. While focusing on the manufacturing of thermal insulation materials, the main points to be considered are particle size, reinforcement fiber ratio, and press durations, besides binders type and temperature. This study aimed to optimize the manufacturing process of hybrid bio panels based on oil palm trunks as thermal insulation material. The response surface methodology (RSM), with a Box-Behnken Design (BBD), was used to model and optimize the manufacturing process variables. A total of 17 hybrid bio panels were in operation and the independent variables used were particle size, ramie ratio, and press duration. The dependent variables were water absorption, thickness swelling, MOR, and thermal conductivity. The hybrid bio panel obtained under the optimum conditions was characterized by thermogravimetric analysis to observe thermal stability. On the basis of analysis of variance and the contour plot, it was discovered that the interaction between particle size and ramie fiber ratio was a significant variable to optimize hybrid bio panel manufacture. The thermal resistance and modulus of rupture of hybrid bio panels also improved with higher particle size and ramie fiber ratio. The optimum manufacturing process was obtained at OPT particle size of 0.248 mm, ramie fiber ratio of 19.775, and press duration of 25 min. This condition produces a thermal conductivity of 0.079 W/mK, modulus of rupture of 17.702 MPa, water absorption of 54.428%, and thickness swelling of 21.974%. In addition, the hybrid bio panel resulted in thermal stability of 341 °C.
Źródło:
Journal of Ecological Engineering; 2023, 24, 2; 39--49
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of thermal-oil heating systems with exhaust gas heaters on motor ships
Analiza olejowych systemów grzewczych z nagrzewnicami utylizacyjnymi na statkach motorowych
Autorzy:
Michalski, R.
Zeńczak, W.
Powiązania:
https://bibliotekanauki.pl/articles/359401.pdf
Data publikacji:
2010
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
okrętowy system grzewczy
nagrzewnice olejowe
analiza egzergetyczna
ship's heating system
thermal oil heater
exergetic analysis
Opis:
The article characterises the properties of steam and special thermal oils as the basic heating media on motor ships. The features of the heating installations have been presented with the particular attention drawn to thermal oil installations in which exhaust gas heaters have been employed. Also an example of the comparative exergetic analysis has been included demonstrating the comparison between steam generation in exhaust gas boiler and oil heating system in the heater, assuming the identical heat flux transferred in the boiler and the heater from the exhaust gas to the heating medium (steam and thermal oil) and assuming identical increase of exhaust gas entropy in the heat exchangers under examination.
W referacie scharakteryzowane zostały własności pary wodnej i specjalnych olejów grzewczych jako podstawowych czynników grzewczych na statkach motorowych. Przedstawiono cechy instalacji grzewczych ze szczególnym uwzględnieniem instalacji olejowych, w których występują nagrzewnice utylizacyjne. Zamieszczono także przykład porównawczej analizy egzergetycznej systemu wytwarzania pary w kotle utylizacyjnym oraz systemu podgrzewania oleju w nagrzewnicy przy założeniu jednakowego strumienia ciepła przekazywanego w kotle i nagrzewnicy od spalin do czynnika grzewczego (pary wodnej i oleju) oraz przy założeniu jednakowego przyrostu entropii spalin w rozpatrywanych wymiennikach ciepła.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2010, 24 (96); 33-40
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies