Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "tannery wastewater" wg kryterium: Temat


Wyświetlanie 1-11 z 11
Tytuł:
Reduction of Total Chromium Levels from Raw Tannery Wastewater via Electrocoagulation using Response Surface Methodology
Autorzy:
Aguilar-Ascón, Edwar
Marrufo-Saldaña, Liliana
Neyra-Ascón, Walter
Powiązania:
https://bibliotekanauki.pl/articles/124384.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
chromium
electrocoagulation
tannery wastewater
aluminum electrodes
response surface
Opis:
This study focused on reducing total chromium levels in raw wastewater from the leather tanning industry via electrocoagulation to comply with maximum permissible limits (MPL) and to determine the effects of main process parameters. An electrocoagulation reactor was built using aluminum electrodes as an anode and cathode. Then, the response surface methodology was applied using a 3k factorial design considering three factors, namely current intensity, treatment time, and pH. The total chromium removal percentage was considered as a response variable. 99% of the total chromium found in wastewater could be removed after 14-min treatment at 2-A current intensity and pH 5.5. Similar amount of chromium was removed at pH of 8.5 and 7. Statistical analysis performed at a confidence level of p < 0.05 revealed that all three factors influenced electrocoagulation. Total chromium could be efficiently removed from raw wastewater at a current intensity of 2.9 A, a pH of 8.4, and a treatment time of 21 min, suggesting that electrocoagulation using aluminum electrodes is an efficient method for total chromium removal. Thus, this process must be considered as a solution to the problems caused by the leather tanning industry and for better compliance with the MPL established in the Peruvian environmental standards.
Źródło:
Journal of Ecological Engineering; 2019, 20, 11; 217-224
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternative Treatment Strategy for Different Streams of Tannery Wastewater
Autorzy:
Przywara, L.
Powiązania:
https://bibliotekanauki.pl/articles/124452.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
tannery wastewater
Fenton's reagent
catalytic oxidation
COD
sulphide
Opis:
This article discusses the results of laboratory tests aimed to determine the effectiveness of tannery wastewater treatment in the process of enhanced oxidation using Fenton reagent. The general sewage from the tannery located in Mazowieckie Province was used for the research. The process was carried out using two doses of iron of 0.45 g Fe2+/dm3. and 0.56 g Fe2+/dm3, and H2O2 from 2.21 g/dm3 to 4.08 g/dm3. All the tests were performed for a constant optimum pH of 3.0. Wastewater was characterized by basic physico-chemical indicators (pH, conductivity, COD, chromium, ammonium nitrogen). The efficiency of the process was determined mainly on the basis of changes in the organic pollutants identified as COD. The efficacy of the Fenton process for different doses of Fe2+ and Fe2+ / H2O2 ratio of 1: 5, 1: 6 and 1: 7 was from 69 to 80% COD reduction in relation to raw sewage. Another aspect of the study was determining the possibility of removing sulphides from the wastewater by catalytic oxygenation with oxygen from air in the presence of manganese. In this case, the wastewater produced during leather manufacture in tanneries located in the southern part of Poland was examined. The subject of the study described in the paper was to determine the optimum manganese dose and oxidation time to simultaneously remove the sulphides and organic pollutants expressed as COD. The change in pollutant content in the wastewater over time indicates that the reduction of parameters takes place within one hour after the addition of manganese. Using the process of catalytic oxidation with 0.1 g/dm3 to 0.6 g/dm3 manganese and a reaction time of 1, 3, 24 h, the sulphides were removed in the range of 50 to 99% and organic compounds in 12 to 65%.
Źródło:
Journal of Ecological Engineering; 2017, 18, 4; 160-168
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regeneracja chromowych ścieków garbarskich za pomocą polimerowych membran nanofiltracyjnych
Regeneration of chromium tannery wastewater using polymeric nanofiltration membranes
Autorzy:
Kowalik-Klimczak, A.
Religa, P.
Gierycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/2073177.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
nanofiltracja
membrany polimerowe
ścieki garbarskie chromowe
nanofiltration
polymeric membranes
chromium tannery wastewater
Opis:
Podczas badań określono wpływ początkowego stężenia siarczanów obecnych w chromowych ściekach garbarskich na wydajność i efektywność rozdział filtrowanego roztworu na dwie kąpiele umożliwiając jego ponowne wykorzystanie. Stwierdzono, że wysokie początkowe stężenie siarczanów sprzyja łatwiejszemu przenikaniu jonów chlorkowych przez membranę do permeatu, ale przyczynia się również do wydłużenia czasu potrzebnego na uzyskanie założonego współczynnika zatężenia jonów chromu(III) w retentacie.
The effect of sulphate concentration in chromium tannery wastewater on the productivity and effectiveness of the filtered solution enabling its distribution on two reusable baths was determined. The hight initial sulphate concentration supported the simpler permeation of chloride ions throught the membrane to permeate and also increased the time needed to obtain the defined rate of chromium(III) concentration factor in retentate.
Źródło:
Inżynieria i Aparatura Chemiczna; 2015, 4; 167--169
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utlenienie siarczków w ściekach garbarskich
Oxidation of sulphides in tannery wastewater
Autorzy:
Kubala, A.
Przywara, L.
Powiązania:
https://bibliotekanauki.pl/articles/127302.pdf
Data publikacji:
2015
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
ścieki garbarskie
siarczki
utlenianie
siarczan manganu
tannery wastewater
sulphides
oxidation
manganese sulphate
Opis:
Przemysł garbarski charakteryzuje się znaczną uciążliwością dla środowiska naturalnego. Wytwarza duże ilości ścieków zawierających związki organiczne wypłukiwane ze skóry (m.in. tłuszcze i białka), różnorodne substancje nieorganiczne, w tym chrom(III), siarczki. Skład ścieków z przemysłu garbarskiego zależy od rodzaju wyprawy oraz od pochodzenia danej skóry. Obecnie wszystkie garbarnie w procesie przetwarzania skór zwierzęcych na skórę używają siarczków. Zazwyczaj jest to siarczek sodu lub wodorosiarczek sodu. Forma siarczków, w jakiej znajdują się one w ściekach, zależy od odczynu. W roztworze kwaśnym przy pH < 6 dominuje obecność H2S; przy pH ≥ 8 główną postacią są MeHS, natomiast siarczki występują przy pH ≥ 10. Związki te mogą być usuwane w procesach biologicznych, chemicznych i fizycznych. Jedną z metod usuwania siarczków ze ścieków garbarskich może być ich utlenienie. W pracy przedstawiono wyniki laboratoryjnych badań utleniania siarczków w ściekach z garbarni przy zastosowaniu siarczanu(VI) manganu(II). Przedmiotem opisywanych badań w pracy było określenie optymalnej dawki manganu i czasu utlenienia. Badania przeprowadzono przy różnym stosunku Mn:S. Zmiana w czasie zawartości siarczków w ściekach wskazuje, że reakcje chemiczne prowadzące do obniżenia parametrów mają miejsce natychmiast po dodaniu utleniacza.
Tanning industry is characterized by a considerable environmental nuisance. It produces large amounts of wastewater, containing organic compounds leached from skin (eg fats and protein) as well as various inorganic substances including chromium(III), sulphides. The composition of wastewater from tanning industry depends on the type and origin of leather used. Nowadays, in the transforming process of animal skin into leather almost every tannery uses sulphides, mostly sodium sulphide and sodium hydrosulphide. The form of sulphides in effluents depends on the pH. The acidic solution (pH < 6) is dominated by the presence of H2S, while, MeHS constitutes the main form for at pH ≥ 8. Sulphides dominate at the pH ≥ 10. These compounds can be removed by biological, chemical and physical processes. The paper presents the results of laboratory studies of sulphides oxidation in the effluent from tannery wastewater, using manganese sulphate. The aim of the experiments performed was to determine the optimal dosage of manganese and the most appropriate oxidation time. The studies were conducted at various Mn:S ratios. Changes of sulphides during the oxidation time indicate that chemical reactions leading to the reduction of the parameter take place immediately after oxidizer addition.
Źródło:
Proceedings of ECOpole; 2015, 9, 1; 253-259
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie procesu Fentona do oczyszczania ścieków garbarskich
Application of Fenton’s process for treatment of tannery wastewater
Autorzy:
Przywara, L.
Powiązania:
https://bibliotekanauki.pl/articles/401972.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
ścieki garbarskie
zanieczyszczenia organiczne
odczynnik Fentona
tannery wastewater
COD removal
Fenton's reagent
Opis:
W artykule omówiono badania, których celem było określenie efektywności oczyszczania ścieków garbarskich w procesie pogłębionego utleniania z zastosowaniem odczynnika Fentona. Proces przeprowadzono stosując różne dawki żelaza zmieniane w zakresie od 0,056 g Fe2+/dm3 do 0,56 g Fe2+/dm3, H2O2od 0,34 g/dm3 do 5,44 g/dm3 i w zakresie pH od 2,5 do 3,5. Ścieki scharakteryzowano wykonując oznaczenia podstawowych wskaźników fizyko-chemicznych (pH, przewodność, ChZT, chrom, azot amonowy). Badano także możliwość zastosowania procesu koagulacji przy użyciu koagulantu SAX 18. Efektywność procesu określono w oparciu o zmiany głównie wartości zanieczyszczeń organicznych określonych jako ChZT. Skuteczność procesu Fentona prowadzonego dla dawki Fe2+ na poziomie 0,56 g Fe2+/dm3i H2O2 4,08 g/ dm3 wynosiła 80% zmniejszania ChZT w stosunku do ścieków surowych i była wyraźnie wyższa niż w przypadku procesu koagulacji.
The aim of this study was to treat of tannery wastewater with the chemical advanced oxidation using Fenton reagent. Advanced oxidation process was carried out using different doses of iron (Fe2+) changes from 0.056 g Fe2+/dm3to 0.56 g Fe2+/dm3and H2O2from 0.34 g/dm3 to 5.44 g/ dm3. The wastewater samples were characterized for the concentration of chemical oxygen demand (COD), chromium, ammonia and pH, conductivity. The possibility of using the coagulation process using SAX 18 was also investigated. The efficiency of the applied processes was monitored by change mainly of chemical oxygen demand (COD). The maximum COD removal was 80% for Fenton’s oxidation process at pH 3.0, Fe2+ (0.56 g Fe2+/ dm3) and H2O2 (4.08 g/ dm3) and significantly higher than in the case of the coagulation process.
Źródło:
Inżynieria Ekologiczna; 2017, 18, 2; 117-122
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of pretanning effluent originated from leather industry on the germination of rice seeds
Autorzy:
Yapici, A. N.
Tayyar, S.
Powiązania:
https://bibliotekanauki.pl/articles/207851.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pretanning
leather industry
tannery effluents
wastewater
tannery wastewater
leather processing
garbowanie
przemysł skórzany
ścieki garbarskie
obróbka skóry
zanieczyszczenie gleby
Opis:
The effects of pretanning effluent obtained from leather processing on the germination and seedling growth of rice were investigated. Undiluted pretanning effluents, and its 1:10, 1:40 and 1:80 dilutions along with tap water were used for irrigation to germinate the seeds. Some morphological characteristics were investigated. No germination occurred in the seeds irrigated with the undiluted pretanning effluent. Elemental analyses of the shoots and roots of rice seedlings were conducted. The lowest contents of C (29.7%), S (0.41%), Cr (1.2 mg/kg) and Na (2933.8 mg/kg) in shoots were detected in control group. The lowest contents of Cu (38.81 mg/kg) and Mn (2225.0 mg/kg) in roots were determined in irrigations with 1:10 dilutions.
Źródło:
Environment Protection Engineering; 2014, 40, 3; 17-28
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of pressure membrane processes for the minimization of the noxiousness of chromium tannery wastewater
Zastosowanie ciśnieniowych procesów membranowych w celu minimalizacji uciążliwości chromowych ścieków garbarskich
Autorzy:
Kowalik-Klimczak, A.
Gierycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/256424.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
chromium tannery wastewater
pressure membrane processes
ścieki garbarskie
ścieki chromowe
ciśnieniowe procesy membranowe
Opis:
This paper presents a literature review concerning the possibility of minimizing the noxiousness of chromium tannery wastewater. Based on the comparison of different methods applied for removing chromium (III) ions from wastewater and water solutions, the special qualities of pressure membrane processes were found. The appropriate combination of pressure membrane processes enables one to obtain saline solutions that can be re-used during the tanning of skins.
W pracy dokonano przeglądu literaturowego dotyczącego możliwości minimalizacji uciążliwości chromowych ścieków garbarskich. Na podstawie porównania różnych metod stosowanych do usuwania jonów chromu(III) ze ścieków i roztworów wodnych stwierdzono szczególne możliwości ciśnieniowych procesów membranowych. Polegają one na tym, że odpowiednie połączenie ciśnieniowych procesów membranowych umożliwia uzyskanie kąpieli soli, które mogą być ponownie użyte podczas garbowania skór.
Źródło:
Problemy Eksploatacji; 2014, 1; 71-79
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microfiltration and ultrafiltration of tannery wastewaters
Mikrofiltracja i ultrafiltracja ścieków garbarskich
Autorzy:
Kowalik, A.
Kluziński, W.
Gierycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/256573.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
mikrofiltracja
MF
ultrafiltracja
UF
ścieki garbarskie
tłuszcz
białko
microfiltration
ultrafiltration
tannery wastewater
fat
protein
Opis:
The article presents a new pilot scale membrane unit with microfiltration and ultrafiltration modules. The obtained results of the initial investigations confirm the applicability of the MF and UF membranes for proper removal of fats and proteins from tannery wastewaters. The composition of real tannery effluents, the results of the accomplished analyses of microfiltration and ultrafiltration and the evaluation of the possibilities of implementation of this process in a larger scale have been also presented.
W artykule zaprezentowano półtechniczną instalację membranową wraz z testowanymi modułami mikro- i ultrafiltracyjnymi oraz metodykę usuwania z ich pomocą emulsji tłuszczowych i białek zwierzęcych ze ścieków garbarskich. Przedstawiony został skład przebadanych ścieków garbarskich, wyniki przeprowadzonych badań mikro- i ultrafiltracji, a także ocena możliwości i celowość zastosowania tego procesu w większej skali.
Źródło:
Problemy Eksploatacji; 2009, 1; 135-144
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ zmian stabilności pracy membrany nanofiltracyjnej na efektywność procesu regeneracji chromowych ścieków garbarskich
Effect of stability of nanofiltration membranes changing on efficiency of regeneration of chromium tannery wastewater process
Autorzy:
Kowalik, A.
Religa, P.
Gierycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/2071502.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
membrana nanofiltracyjna
ścieki garbarskie chromowe
potencjał zeta
AFM
nanofiltration membranes
chromium tannery wastewater
zeta potential
Opis:
W pracy przeanalizowano możliwość użycia membrany NF typu UL do regeneracji chromowych ścieków garbarskich. Stwierdzono, żc warunki procesu powodują niekorzystne i nieodwracalne zmiany właściwości selektywnych testowanej membrany. Ponadto niekorzystnym zmianom ulega struktura membrany. Otrzymane wyniki wskazują, żc membrana NF typu IIL nic nadaje się do regeneracji chromowych ścieków garbarskich.
The possibility of the application of HL membrane to regeneration of chromium tannery wastewater was analyzed. The results showed that the process conditions caused the unfavourable and irreversible change of selective properties of tested membrane. Moreover the membrane structure submitted the disadvantageous changes. Obtained results show that the HL membrane isn't granting to regeneration of chromium tannery wastewater.
Źródło:
Inżynieria i Aparatura Chemiczna; 2011, 5; 60-61
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Potential of electrocoagulation technology for the treatment of tannery industrial effluents: A brief review
Autorzy:
Kumar Verma, Rishi
Gautam, Kajal
Agrahari, Sakshi
Kumar, Sushil
Powiązania:
https://bibliotekanauki.pl/articles/2173432.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tannery wastewater
alternative treatment methods
advanced electrocoagulation
hybrid approaches
ścieki
alternatywne metody leczenia
zaawansowana elektrokoagulacja
podejście hybrydowe
Opis:
In this new era, we are facing a major problem regarding wastewater in the environment, which has an adverse effect on human life. Wastewater from tanning industries is one of the major contributors to the pollution in aquatic systems. Tannery industries have always contributed to the world’s economy and trade despite facing criticism due to environmental pollution. Tanning effluent consists of organic, inorganic (chromium, nitrogenous compounds), and a large amount of solid content like TDS, TSS, TVS. To overcome these significant challenges, there have been few advancements related to tannery wastewater treatment. This article aims to provide a brief review on electrocaogulation based treatment technologies for eliminating the impurities from tannery wastewater. This review consists of the background with characteristics of tannery wastewater, the alternatives for treating the tannery effluent over the years along. A detailed description of the advanced technologies based on electrocoagulations is implemented to overcome the drawbacks of the existing methods.
Źródło:
Chemical and Process Engineering; 2022, 43, 2; 217--222
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the Quality of Wastewater Generated During Production at a Tannery Plant
Autorzy:
Dziadel, Maciej
Ignatowicz, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2086409.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
industrial wastewater
tannery
chrome
Opis:
The aim of the study was to determine the composition of wastewater generated in a small tannery plant in the Podlaskie Province at different stages of the technological process. Since the plant uses chromium salts for the actual tanning process and the resulting wastewater is separated into two streams, it was possible to determine the content of chromium and other pollutants in the wastewater at different stages of the production processes. This allowed us to evaluate the biodegradability of the wastewater produced during production, the concentration of chromium compounds and other contaminants. Based on the results obtained, the wastewater generated during the production process was found to be non-biodegradable (except for the mixed wastewater) with chromium concentrations of 2.0–2.46 g/dm3.
Źródło:
Journal of Ecological Engineering; 2022, 23, 5; 109--115
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-11 z 11

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies