Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "synchronous generator" wg kryterium: Temat


Tytuł:
A flexible control strategy for shoreto- ship power system in terms of gridconnected and off-grid switch
Autorzy:
Ji, Z.
Zhao, Z.
Wang, J.
Lv, Z.
Powiązania:
https://bibliotekanauki.pl/articles/259487.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
shore power supply
ship power system
virtual synchronous generator
flexible control
Opis:
There are promising application prospects for applying the shore power technology to the ships in the port for the purpose of pollution prevention. However, the grid-connection of the shore power supply to the ship power grid leads to current surges, damages the ship power consumption equipment, and results in the instability of the ship power grid system, which will seriously affect the reliability of the operation of the ship power grid system. In order to address this problem, the mathematical model of virtual synchronous generator is introduced in this paper. Then, a control method for the flexible grid-connection of the shore power supply to the ship power grid based on the virtual synchronous generator is proposed. Next, the output characteristics of the shore power supply are optimized to match the characteristics of the ship generator, which contributes to the flexible grid-connection of the shore power supply to the ship power grid system. The effectiveness and the feasibility of this method are verified by simulation and experiments.
Źródło:
Polish Maritime Research; 2018, S 2; 139-148
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A hybrid active fault-tolerant control scheme for wind energy conversion system based on permanent magnet synchronous generator
Autorzy:
Tahri, A.
Hassaine, S.
Moreau, S.
Powiązania:
https://bibliotekanauki.pl/articles/140788.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wind energy conversion system
active fault-tolerant control
permanent magnet synchronous generator
sensor fault diagnosis
sliding mode observer
Opis:
Wind energy has achieved prominence in renewable energy production. There- fore, it is necessary to develop a diagnosis system and fault-tolerant control to protect the system and to prevent unscheduled shutdowns. The presented study aims to provide an experimental analysis of a speed sensor fault by hybrid active fault-tolerant control (AFTC) for a wind energy conversion system (WECS) based on a permanent magnet synchronous generator (PMSG). The hybrid AFTC switches between a traditional controller based on proportional integral (PI) controllers under normal conditions and a robust backstepping controller system without a speed sensor to avoid any deterioration caused by the sensor fault. A sliding mode observer is used to estimate the PMSG rotor position. The proposed controller architecture can be designed for performance and robustness separately. Finally, the proposed methodwas successfully tested in an experimental set up using a dSPACE 1104 platform. In this experimental system, the wind turbine with a generator connection via a mechanical gear is emulated by a PMSM engine with controled speed through a voltage inverter. The obtained experimental results show clearly that the proposed method is able to guarantee service production continuity for the WECS in adequate transition.
Źródło:
Archives of Electrical Engineering; 2018, 67, 3; 485--497
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A review of control methods of wind turbine systems with permanent magnet synchronous generator
Przegląd metod sterowania systemów elektrowni wiatrowych z generatorem synchronicznym o magnesach trwałych
Autorzy:
Gajewski, P.
Powiązania:
https://bibliotekanauki.pl/articles/407770.pdf
Data publikacji:
2017
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
wind energy
permanent magnet synchronous generator
power converter
simulation
energia wiatrowa
generator synchroniczny PMSG
układ przekształtnikowy
badanie symulacyjne
Opis:
The paper presents a review of control methods of the wind energy conversion systems with permanent magnet synchronous generator. The modern vector control methods for converter system of variable-speed wind energy conversion have been described. In order to improve the energy efficiency of wind turbine, the maximum power point tracking algorithm has been applied. To verify the effectiveness of the considered configuration and its control strategy, the selected simulation studies have been performed. The obtained study results showed the high effectiveness of the considered configuration and its control methods.
W artykule przedstawiono przegląd metod sterowania elektrowni wiatrowej z generatorem synchronicznym o magnesach trwałych. Opisano nowoczesne metody sterowania wektorowego dla przekształtnikowych układów elektrowni wiatrowych. W celu zwiększenia skuteczności przetwarzania energii wiatrowej zastosowano algorytm śledzenia mocy maksymalnej. W celu sprawdzenia skuteczności rozpatrywanej topologii i metody sterowania, wybrane badania symulacyjne zostały przedstawione i omówione. Przeprowadzone badania potwierdziły prawidłowość i dużą dokładność sterowania rozpatrywanej topologii i ich metod sterowania.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2017, 7, 4; 32-37
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A survey of the synchronization process of synchronous generators and power electronic converters
Autorzy:
Jarzyna, W.
Powiązania:
https://bibliotekanauki.pl/articles/200510.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
synchronization
micro-generators
SRF PLL
synchronous micro-generator
PV micro-generator
Opis:
The process of synchronization of synchronous generators and power electronic converters with the power grid may take on quite different forms. This is due to their specific principles of operation and essential differences in energy conversion process. However, since synchronous generators and power converter often operate in the same utility network, coherent rules should be defined for them. There-fore, this paper aims at a formulation of the uniform and consistent interpretation of synchronization with the power grid for both types of aforementioned units. The author starts from the classic interpretation of synchronization for synchronous generators and power electronic converters, considered as micro-generators, specifies their mathematical and numerical models and then performs simulation tests. Selected synchronization algorithms are described in detail. Simulation tests are used for analysis of the elaboration of outcomes. The results of simulation tests are handled to formulate a uniform interpretation of synchronization for the micro-generation systems considered. Based on the results obtained, appropriate parallels are built between the two systems being compared. It is shown that the synchronization processes are identical regardless of the micro-generation unit considered. Nonetheless, they differ significantly due to their properties in transient states. Inverter systems have higher dynamics but their disadvantage lies in the relatively high sensitivity to disturbances and the complex selection process of the synchronization algorithm.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 6; 1069-1083
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Advanced Control Structures of Turbo Generator System of Nuclear Power Plant
Zaawansowane struktury sterowania systemem turbogeneratora elektrowni jądrowej
Autorzy:
Sokólski, P.
Kulkowski, K.
Kobylarz, A.
Duzinkiewicz, K.
Rutkowski, T. A.
Grochowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/397572.pdf
Data publikacji:
2015
Wydawca:
ENERGA
Tematy:
turbogenerator
steam turbine
synchronous generator
nuclear power plant
fuzzy control
turbina parowa
generator synchroniczny
elektrownia jądrowa
sterowanie rozmyte
Opis:
In the paper a  synthesis of advanced control structures of turbine and synchronous generator for nuclear power plant working under changing operating conditions (supplied power level) is presented. It is based on the nonlinear models of the steam turbine and synchronous generator cooperating with the power system. The considered control structure consists of multi-regional fuzzy control systems with local linear controllers, including PID controllers, in particular control loops of turbine and generator. Soft switching between the local controllers is performed by the Takagi-Sugeno-Kang fuzzy logic mechanism. Parameters of the local controllers were optimally tuned for a priori chosen operating points within the range of 50–100% of nominal active power generated by the synchronous generator. Simulation results show that proposed advanced control structure is superior to widely used classic control structure (local controllers tuned for nominal operating points). During simulations the data of the real devices was used, respectively for the 4 CK 465 steam turbine and synchronous generator GTHW-600, which were planned to be used in the first Polish nuclear power plant in Żarnowiec.
W artykule przedstawiono syntezę zaawansowanych struktur sterowania turbiną i generatorem synchronicznym dla elektrowni jądrowej pracującej w zmiennych warunkach operacyjnych (zapotrzebowanie na moc czynną). Oparta jest ona na nieliniowych modelach turbiny parowej oraz generatora synchronicznego współpracującego z systemem elektroenergetycznym. Rozważana struktura sterowania składa się z wieloobszarowych systemów sterowania rozmytego z lokalnymi liniowymi regulatorami, w tym regulatorami PID, w poszczególnych pętlach sterowania turbiny i generatora. Miękkie przełączanie pomiędzy lokalnymi regulatorami jest realizowane przez mechanizm logiki rozmytej Takagi-Sugeno-Kanga. Parametry regulatorów lokalnych były dobierane optymalnie dla wybranych a priori punktów pracy w zakresie 50–100% nominalnej mocy czynnej wytwarzanej przez generator synchroniczny. Wyniki symulacji pokazują, że proponowana struktura sterowania zaawansowanego przewyższa powszechnie stosowaną klasyczną strukturę sterowania (pojedyncze regulatory lokalne strojone dla nominalnego punktu pracy). W trakcie symulacji wykorzystano dane rzeczywistych urządzeń, odpowiednio: turbiny parowej 4 CK 465 i generatora synchronicznego GTHW-600, które planowano zastosować w pierwszej polskiej elektrowni jądrowej w Żarnowcu.
Źródło:
Acta Energetica; 2015, 3; 83-96
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analityczne określanie parametrów stabilizatora systemowego dla generatora synchronicznego ze statycznym układem wzbudzenia
Autorzy:
Lubośny, Z.
Białek, J. W.
Powiązania:
https://bibliotekanauki.pl/articles/397010.pdf
Data publikacji:
2009
Wydawca:
ENERGA
Tematy:
stabilizator systemowy
generator
generator synchroniczny
synchronous generator
system stabilizer
Opis:
W artykule przedstawiono sposób analitycznego określania wartości parametrów stabilizatora systemowego dla generatora synchronicznego ze statycznym układem wzbudzenia. Uzyskany w proponowany sposób stabilizator systemowy w szerokim zakresie częstotliwości kołysań elektromechanicznych wytwarza praktycznie tylko moment elektromagnetyczny tłumiący. Wyprowadzenie zależności pozwalających obliczać parametry stabilizatora oparto na modelu Heffrona-Philipsa ze statycznym układem wzbudzenia i regulacji napięcia oraz ze stabilizatorem systemowym z prędkością wirnika turbozespołu jako wielkością wejściową. Proponowana metoda pozwala w bardzo prosty sposób obliczać stałe czasowe stabilizatora. Efektywność proponowanego układu zweryfikowano na modelu nieliniowym jedno- i wielomaszynowym.
Źródło:
Acta Energetica; 2009, 1; 83-98
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza drgań hydrozespołu z generatorem wzbudzanym magnesami trwałymi
Vibrations Analyse of Hydroset with PM Generator
Autorzy:
Węgiel, D.
Borkowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/1367538.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
generator synchroniczny z magnesami trwałymi
naciąg magnetyczny
analiza drgań
PM synchronous generator
magnetic pull
vibration analysis
Opis:
Subject undertaken in this work concerns on analysis and interpretation of the vibration measurement results for the permanent magnet generators (75kW) with the fact that they differ structurally of stator solutions while maintaining the same dimensions. Generators are installed in the integrated turbine propeller set working in a small hydropower plant. One of these cases has some structural errors, which leads to the generation of significant levels of vibration as compared to the case of the correct structure. The study was undertaken to answer the question, what is the reason of vibration for generators with mentioned construction and discussed to what designers should pay attention in order to avoid mistakes during designing process. Qualitative theoretical analyses of the magnetic pool for this purpose are discussed in the paper.
Temat podjęty w pracy dotyczy analizy i interpretacji wyników pomiarowych drgań dla generatorów wzbudzanych magnesami trwałymi (75kW) różniących się konstrukcyjnie rozwiązaniami stojana przy zachowaniu jednakowych gabarytów. Generatory zainstalowano w zintegrowanych z turbiną śmigłową hydrozespołach pracujących w Małej Elektrowni Wodnej. Jeden ze generatorów posiadał pewne błędy konstrukcyjne, co było przyczyną generacji drgań o znacznych poziomach w stosunku do przypadku generatora o konstrukcji poprawnej. W pracy podjęta została próba odpowiedzi na pytanie, co jest podstawową przyczyną generacji drgań w generatorach o omawianej konstrukcji i na co powinni zwracać uwagę konstruktorzy by nie popełniać błędów przy projektowaniu. W tym celu poddano teoretycznym analizom jakościowym problem powstawania sił promieniowych wskutek naciągu magnetycznego.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 21-26
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza sprawności toru przetwarzania energii małej elektrowni wodnej ze zintegrowaną turbiną pracującą przy zmiennej prędkości obrotowej
Efficiency Analysis of Energy Conversion System for Small Hydro Power with Integrated Turbine Working at Variable Speed
Autorzy:
Borkowski, D
Węgiel, T
Powiązania:
https://bibliotekanauki.pl/articles/1368173.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
zmienna prędkość obrotowa
generator z magnesami trwałymi
mała elektrownia wodna
variable speed operation
PM synchronous generator
small hydropower plant
Opis:
One of the most important aspects in choosing the energy conversion system for water Power plants is its efficiency. Small Hydropower Plants, which are mostly run-of-the-river plants, are characterized by necessity of working with changeable hydrological conditions. That is why theirs energy conversion systems should ensure high efficiency in a wide range of water flow. This paper presents efficiency analysis of energy conversion system containing integrated propeller turbine with permanent magnet synchronous generator. In order to obtain high efficiency in a wide range of water flow the variable speed operation method, has been used. This solution requires a Power Electronic Unit in the energy conversion system to match the load and control the power flow from the generator to the grid. Presented analysis concerns all elements of energy conversion system of real object of 75kW power. This article contains both theoretical analysis, and real efficiency characteristics.
Jednym z najważniejszych aspektów przy wyborze systemu przetwarzania energii dla elektrowni wodnych jest ich sprawność. Małe elektrownie wodne, które w większości są elektrowniami przepływowymi, charakteryzują się koniecznością pracy przy zmiennych warunkach hydrologicznych. Z tego względu, tory przetwarzania energii powinny zapewniać wysoką sprawność w szerokim zakresie przepływów wody. Artykuł ten przedstawia analizę sprawności toru przetwarzania energii składającego się z turbiny śmigłowej zintegrowanej z generatorem synchronicznym wzbudzanym magnesami trwałymi. W celu zapewnienia wysokiej sprawności w szerokim zakresie przepływu wody wykorzystano możliwość pracy hydrozespołu ze zmienną prędkość obrotową, natomiast dopasowanie parametrów generowanej energii do wymagań systemu elektroenergetycznego zrealizowano poprzez energoelektroniczny układ przekształtnikowy AC/DC/AC. Prezentowana analiza dotyczy wszystkich elementów składowych toru przetwarzania energii rzeczywistego obiektu o mocy 75kW. W artykule zaprezentowano zarówno rozważania teoretyczne jak i rzeczywiste charakterystyki sprawności.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2013, 3, 100/1; 21-26
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of electrical non-isolated load sharing systems operation with use of the auctioneering diodes
Autorzy:
Kozak, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/376808.pdf
Data publikacji:
2019
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
DC link
microgrids
FOC
asynchronous generator
synchronous generator
load sharing
Opis:
The paper presents the background and results of numerical simulation and experimental research of a system using auctioneering diodes used to distribute the power of direct current between two power converters operating in parallel. Non-isolated power distribution systems using blocking diodes are used in the ship's electrical power systems, however, they create problems related to control and the possibility of ground faults. Another issue occurring during the operation of this type of systems is the increased heat dissipation. Selected problems related to the operation of the above systems have been identified by means of simulation studies and experiments carried out in a 11 kVA laboratory system and the theoretical basis along with results are provided in the article.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2019, 98; 77-88
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the effect of exceeding the allowable values of selected parameters of the receivers on operating conditions of a low voltage network
Autorzy:
Nawrowski, R.
Stein, Z.
Zielińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/97549.pdf
Data publikacji:
2013
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
low voltage network
electric power system
degree voltage asymmetry
transformer load asymmetry
synchronous generator
Opis:
Minimum value of the power factor of an electric power network is constrained and its value is determined by the regulations. Customer of electric power is responsible for maintenance of proper value of the power factor. On the other hand, minor electric power customers are not charged with any financial consequences for disregarding proper value of the parameter, in spite of the fact that the distribution companies are charged with the cost of increased power losses. Moreover, the degree of voltage asymmetry of electric power network is constrained and its value is defined by the regulations too. Asymmetry of output voltage of power transformer is caused chiefly by asymmetric loads. The paper presents a proposal of estimating additional power losses caused by reduced value of the power factor and analyzes the effect of various types of load asymmetry on the value of the asymmetry factor. The proposals and analyzes are carried out with the help of Mathcad software.
Źródło:
Computer Applications in Electrical Engineering; 2013, 11; 128-140
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of star-delta mixed stator winding in permanent magnet synchronous machines with permanent magnets on the rotor surface
Zastosowanie uzwojenia mieszanego stojana typu gwiazda-trójkąt w maszynach synchronicznych o magnesach trwałych
Autorzy:
Gwoździewicz, M.
Gawron, S.
Powiązania:
https://bibliotekanauki.pl/articles/1807525.pdf
Data publikacji:
2011
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
higher harmonics
synchronous motor
synchronous generator
permanent magnet
winding factor
windings
Opis:
W artykule przedstawiono rezultaty zastosowania uzwojenia mieszanego stojana typu gwiazdatrójkąt w maszynach synchronicznych o magnesach trwałych. Na bazie produkowanej przez KOMEL maszyny synchronicznej o magnesach trwałych typy PMGg180L-8 został zbudowany model polowoobwodowy w programie Maxwell wersja 14. Zbadano wpływ zastosowania uzwojenia mieszanego stojana typu gwiazda trójkąt na występowanie wyższych harmonicznych oraz właściwości eksploatacyjne maszyn synchronicznych o magnesach trwałych.
Źródło:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały; 2011, 65, 31; 55-63
1733-0718
Pojawia się w:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania prądnicy z magnesami trwałymi
Experimental Results of Permanent Magnet Generator
Autorzy:
Abramowski, A.
Paplicki, P.
Piotuch, R.
Powiązania:
https://bibliotekanauki.pl/articles/1367533.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
prądnica
magnes trwały
SMC
badania eksperymentalne
synchronous generator
permanent magnet
test results
Opis:
The paper presents selected experimental results of a permanent magnet generator up to 0,5 kVA to be used in a micro wind or hydro power plant. No-load back-emf, load output voltage and efficiency map of the generator tested for a rotor speed range of 0-2000 rpm are shown.
Artykuł przedstawia wybrane wyniki badań eksperymentalnych prądnicy z magnesami trwałymi o mocy do 0,5 kVA dedykowanej do mikro elektrowni wiatrowej lub wodnej. Pokazano charakterystyki biegu jałowego i obciążenia oraz mapę sprawności prądnicy badanej w zakresie prędkości obrotowych 0-2000 obr/min.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 33-35
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of higher harmonic contents in salient pole synchronous generator with different rotor construction
Autorzy:
Ludwinek, K.
Nadolski, R.
Staszak, J.
Powiązania:
https://bibliotekanauki.pl/articles/140521.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
salient pole synchronous generator
higher harmonics
solid rotor
rotor with radial incisions
laminated rotor
Opis:
The paper presents a comparison of higher harmonics in induced phase voltages of a stator winding in the no-load state of a three-phase 5.5 kVA salient pole synchronous generator. The comparison is carried out for the synchronous generator with different salient pole rotor constructions: a non-skewed solid rotor, a non-skewed solid rotor with radial incisions, and a laminated electrotechnical steel rotor with skewed slots and damping bars. The calculations of higher harmonics are based on the magnetic field distributions in the air gap, which are carried out in a 2D model in a FEMM program and on the induced voltage waveforms in the stator windings registered during experimental investigations of the 5.5 kVA salient pole synchronous generator in the no-load state.
Źródło:
Archives of Electrical Engineering; 2017, 66, 1; 121-139
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Higher Harmonic Contents in Salient Pole Synchronous Generator with Radial Incisions on the Solid Pole Surface
Autorzy:
Ludwinek, K.
Nadolski, R.
Staszak, J.
Powiązania:
https://bibliotekanauki.pl/articles/1367523.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
salient pole synchronous generator
solid rotor
higher harmonic
Opis:
The paper presents a comparison of higher harmonics in the induced voltages in the stator windings of three salient pole synchronous generators with different rotor construction. The comparison is done for generators with solid rotor without a skew, with solid rotor with radial incisions and with a rotor which consists of laminated electrotechnical steel with a skew. The calculations of the magnetic field distribution in the air gap are made in FEMM program. Comparison of the induced voltage waveforms in the stator windings is based on experimental investigations.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 113-118
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control methods for PWM rectifier cooperating with variable speed PM generator
Autorzy:
Mazgaj, W.
Szular, Z.
Węgiel, T.
Powiązania:
https://bibliotekanauki.pl/articles/229812.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
PM synchronous generator
PWM rectifier
sinusoidal PWM method
hysteresis control method
higher harmonics
Opis:
The paper deals with cooperation between pulse width modulation (PWM) rectifier and variable speed synchronous generator which is applied especially in small water or wind plants. In such applications, the synchronous generator, which is usually permanent magnet (PM) generator, rotates at a variable speed which depends on water or wind energy. Therefore, this energy should be converted to the parameters of the three-phase power grid with the use of a power electronic unit. The main aim of the control strategy is to transfer a maximum possible amount of energy produced by the water turbine or the wind turbine connected to a synchronous generator. The second purpose of the control method is to decrease the amount of higher harmonics of generator currents. The paper describes two basic methods which are used in control systems of the PWM rectifiers. The first one is the sinusoidal PWM method, and the second method relates to the hysteresis switching of the PWM rectifier transistors. A significant part of the paper is devoted to control principles of the PWM rectifier which cooperates with a variable speed PM synchronous generator. Special attention is paid to higher harmonics of PM generator currents with respect to individual methods.
Źródło:
Archives of Control Sciences; 2013, 23, 4; 495-504
1230-2384
Pojawia się w:
Archives of Control Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies