Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "submerged-arc furnace" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Comparison the Physico-Chemical Model of Ferrosilicon Smelting Process with Results Observations of the Process under the Industrial Conditions
Autorzy:
Machulec, B.
Bialik, W.
Powiązania:
https://bibliotekanauki.pl/articles/351005.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ferrosilicon
model
equilibrium
FEM
submerged-arc furnace
Opis:
Based on the minimum Gibbs Free Enthalpy algorithm (FEM), model of the ferrosilicon smelting process has been presented. It is a system of two closed isothermal reactors: an upper one with a lower temperature T1, and a lower one with a higher temperature T2. Between the reactors and the environment as well as between the reactors inside the system, a periodical exchange of mass occurs at the moments when the equilibrium state is reached. The condensed products of chemical reactions move from the top to the bottom, and the gas phase components move in the opposite direction. It can be assumed that in the model, the Reactor 1 corresponds to the charge zone of submerged arc furnace where heat is released as a result of resistive heating, and the Reactor 2 corresponds to the zones of the furnace where heat is produced by electric arc. Using the model, a series of calculations was performed for the Fe-Si-O-C system and was determined the influence of temperatures T1, T2 on the process. The calculation results show a good agreement model with the real ferrosilicon process. It allows for the determination of the effects of temperature conditions in charge zones and arc zones of the ferrosilicon furnace on the carbothermic silica reduction process. This allows for an explanation of many characteristic states in the ferrosilicon smelting process.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 265-270
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Similarity of Ferrosilicon Submerged Arc Furnaces With Different Geometrical Parameters
Autorzy:
Machulec, B.
Gil, A.
Bialik, W.
Powiązania:
https://bibliotekanauki.pl/articles/356113.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
submerged-arc furnace
ferrosilicon
similarity k
c3
J1
Opis:
In order to determine reasons of unsatisfactory production output regarding one of the 12 MVA furnaces, a comparative analysis with a furnace of higher power that showed a markedly better production output was performed. For comparison of ferrosilicon furnaces with different geometrical parameters and transformer powers, the theory of physical similarity was applied. Geometrical, electrical and thermal parameters of the reaction zones are included in the comparative analysis. For furnaces with different geometrical parameters, it is important to ensure the same temperature conditions of the reaction zones. Due to diverse mechanisms of heat generation, different criteria for determination of thermal and electrical similarity for the upper and lower reaction zones were assumed contrary to other publications. The parameter c3 (Westly) was assumed the similarity criterion for the upper furnace zones where heat is generated as a result of resistive heating while the parameter J1 (Jaccard) was assumed the similarity criterion for the lower furnace zones where heat is generated due to arc radiation.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 2343-2347
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the Mining Industry Wastes as Raw Material for Melting of the Complex Fesial Ferroalloys
Autorzy:
Machulec, B.
Bialik, W.
Gil, S.
Powiązania:
https://bibliotekanauki.pl/articles/355998.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FeSiAl
FeSi75
model
submerged arc furnace
Gibbs energy minimization method
Opis:
An economical alternative for the steel industry which uses a separate ferrosilicon and aluminum for the deoxidization of steel is a complex deoxidizer in the form of FeSiAl alloys. The effectiveness of complex deoxidizers is higher and they have a positive effect on quality improvement and also for mechanical properties of the finished steel. It is associated with a smaller number of non-metallic inclusions and a more favorable its distribution in the structure of steel. Noteworthy are the waste from the mining industry simultaneously contains SiO2 and Al2 O3 oxides with a few of dopants in the form of CaO, MgO, FeO, TiO2 oxides. These wastes are present in large quantities and can be a cheap raw material for obtaining complex FeSiAl ferroalloys by an electrothermal method. “Poor” hard coal grades which so far did not apply as a reducing agent in the ferroalloy industry because of the high ash content can also be a raw material for the electrothermal FeSiAl process. The electrothermal FeSiAl melting process is similar to the ferrosilicon process in the submerged arc furnace. For this reason, a model based on Gibbs’ free enthalpy minimization algorithm was used to analyze the simultaneous reduction of SiO2 and Al2 O3 oxides, which was originally elaborated for the ferrosilicon smelting process. This is a system of two closed reactors: the upper one with the lower temperature and the lower one with the higher temperature. Between the reaction system and the environment, and between the reactors inside the system, there is a cyclical mass transfer in moments when the state of equilibrium is reached in the reactors. Based on the model, the basic parameters of the electrothermal reduction process of SiO2 and Al2 O3 oxides were determined and a comparative analysis was made towards the ferrosilicon process.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 975-979
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relation Between Active Power of the Submerged Arc Furnace and the Electric Energy Consumption Indicator in the Process of Ferrosilicon Smelting
Autorzy:
Machulec, B.
Bialik, W.
Gil, S.
Powiązania:
https://bibliotekanauki.pl/articles/353158.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ferrosilicon
FeSi65
FeSi75
submerged arc furnace
active power of furnace
electric energy consumption
Opis:
Higher active power of a submerged arc furnace is commonly believed to increase its capacity in the process of ferrosilicon smelting. This is a true statement but only to a limited extent. For a given electrode diameter d, there is a certain limit value of the submerged arc furnace active power. When this value is exceeded, the furnace capacity in the process of ferrosilicon smelting does not increase but the energy loss is higher and the technical and economic indicators become worse. Maximum output regarding the reaction zone volumes is one of parameters that characterize similarities of furnaces with various geometrical parameters. It is proportional to d3 and does not depend on the furnace size. The results of statistical analysis of the ferrosilicon smelting process in the 20 MVA furnace have been presented. In addition to basic electrical parameters, such as active power and electrical load of the electrodes, factors contributing to higher resistance of the furnace bath and resulting lower reactive power Px demonstrate the most significant effect on the electrothermal process of ferrosilicon smelting. These parameters reflect metallurgical conditions of ferrosilicon smelting, such as the reducer fraction, position of the electrodes and temperature conditions of the reaction zones.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 2; 633-638
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coke and coal as reductants in manganese ore smelting: An experiment
Autorzy:
Suharno, Bambang
Nurjaman, Fajar
Rifki, Achmad
Elvin, Robby Krisnaldo
Putra, Alif Ardiansyah
Ferdian, Deni
Powiązania:
https://bibliotekanauki.pl/articles/127574.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mineralogiczne
Tematy:
ferromanganese
manganese ore
coke
coal
Submerged Electric Arc Furnace (SAF)
Opis:
The effect of coke and bituminous coal on the reduction of medium-grade manganese ore in ferromanganese production was investigated. Charges of 30 kg medium grade manganese ore, 12 kg limestone and varied amounts of coke and coal were smelted in a Submerged Electric Arc Furnace (SAF) at temperatures of 1300°C to 1500°C. The composition of the ferromanganese and the slag were determined by X-Ray Fluorescence. It was found that using coke as a single reductant resulted in a 96% yield of ferromanganese which was higher than by using coal either as a single reductant or in a mixture of coal and coke. It was also found that using coke as a single reductant resulted in the lowest specific energy consumption. Using coal as reductant produced ferromanganese containing high sulfur and phosphorus.
Źródło:
Mineralogia; 2018, 49, 1/4; 35-45
1899-8291
1899-8526
Pojawia się w:
Mineralogia
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies