Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "structure test" wg kryterium: Temat


Tytuł:
Simulations and tests of composite marine structures under low-velocity impact
Autorzy:
Zhu, Zhaoyi
Li, Xiaowen
Chen, Qinglin
Cai, Yingqiang
Xiong, Yunfeng
Powiązania:
https://bibliotekanauki.pl/articles/1573692.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
low-velocity impact
marine structure
composites
test
finite element analysis
Opis:
Due to their excellent performance, composite materials are increasingly used in the marine field. It is of great importance to study the low-velocity impact performance of composite laminates to ensure the operational safety of composite ship structures. Herein, low-velocity drop-weight impact tests were carried out on 12 types of GRP laminates with different layup forms. The impact-induced mechanical response characteristics of the GRP laminates were obtained. Based on the damage model and stiffness degradation criterion of the composite laminates, a low-velocity impact simulation model was proposed by writing a VUMAT subroutine and using the 3D Hashin failure criterion and the cohesive zone model. The fibre failure, matrix failure and interlaminar failure of the composite structures could be determined by this model. The predicted mechanical behaviours of the composite laminates with different layup forms were verified through comparisons with the impact test results, which revealed that the simulation model can well characterise the low-velocity impact process of the composite laminates. According to the damage morphologies of the impact and back sides, the influence of the different layup forms on the low-velocity impact damage of the GRP laminates was summarised. The layup form had great effects on the damage of the composite laminates. Especially, the outer 2‒3 layers play a major role in the damage of the impact and the back side. For the same impact energy, the damage areas are larger for the back side than for the impact side, and there is a corresponding layup form to minimise the damage area. Through analyses of the time response relationships of impact force, impactor displacement, rebound velocity and absorbed energy, a better layup form of GRP laminates was obtained. Among the 12 plates, the maximum impact force, absorbed energy and damage area of the plate P4 are the smallest, and it has better impact resistance than the others, and can be more in line with the requirements of composite ships. It is beneficial to study the low-velocity impact performance of composite ship structures.
Źródło:
Polish Maritime Research; 2021, 1; 59-71
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An accurate prediction of high-frequency circuit behaviour
Autorzy:
Yoshitomi, S.
Kimijima, H.
Kojima, K.
Kokatsu, H.
Powiązania:
https://bibliotekanauki.pl/articles/308807.pdf
Data publikacji:
2005
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
electro-magnetic simulation
SPICE
circuit test structure
RF CMOS
EKV2.6-MOS model
spiral inductor
CMOS VCO
Opis:
An accurate way to predict the behaviour of an RF analogue circuit is presented. A lot of effort is required to eliminate the inaccuracies that may generate the deviation between simulation and measurement. Efficient use of computer-aided design and incorporation of as many physical effects as possible overcomes this problem. Improvement of transistor modelling is essential, but there are many other unsolved problems affecting the accuracy of RF analogue circuit modelling. In this paper, the way of selection of accurate transistor model and the extraction of parasitic elements from the physical layout, as well as implementation to the circuit simulation will be presented using two CMOS circuit examples: an amplifier and a voltage controlled oscillator (VCO). New simulation technique, electro-magnetic (EM)-co-simulation is introduced.
Źródło:
Journal of Telecommunications and Information Technology; 2005, 1; 47-62
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Atopic eczema: genetics or environment?
Autorzy:
Wuthrich, B
Cozzio, A.
Roll, A.
Senti, G.
Kundig, T.
Schmid-Grendelmeier, P.
Powiązania:
https://bibliotekanauki.pl/articles/49593.pdf
Data publikacji:
2007
Wydawca:
Instytut Medycyny Wsi
Tematy:
inflammatory skin disease
environmental factor
food
atopy patch test
non-atopic eczema
Staphylococcus aureus
contact allergen
chronic disease
human disease
genetic condition
therapy
Malassezia sympodialis
skin disease
immunological deviation
atopic eczema
skin structure
skin infection
skin barrier
Opis:
Atopic eczema (AE) is a multifactorial skin disease caused by a variety of factors such as genetic conditions, alterated skin structure, immunologic deviations and environmental factors, among others. There are two main subtypes of AE, i.e. the IgE-associated (“atopic eczema”) and the non-IgE-associated type (“nonatopic eczema”) with different prognosis concerning the development of respiratory diseases (“atopy march”). Recently, it was demonstrated that Filaggrin (= fi lament-aggregating protein, FL) is a major gene for atopic eczema. Filaggrin binds to and aggregates the keratin cytoskeleton in the epidermis. Homozygous FLG mutation leads to complete loss of fi laggrin expression in skin. Half or more of children with moderate to severe AE carry FLG mutations. Moreover, fi laggrin loss-of-function mutations predispose to phenotypes involved in the atopy march. The altered skin structure and a defi ciency in antimicrobial peptides favour colonization with Staphylococcus aureus and yeasts (Malassezia sp.). Sensitization to the yeast occurs almost exclusively in AE patients. S. aureus enterotoxins with superantigenic activity stimulate activation of T cells and macrophages. So far, AE skin lesions are orchestrated by the local tissue expression of proinfl ammatory cytokines and chemokines with activation of T lymphocytes, dendritic cells, macrophages, keratinocytes, mast cells, and eosinophils which lead to the skin infl ammatory responses. From the therapeutic point of view, besides emollients and local corticosteroids, topic immunomodulatory drugs (tacrolimus and pimecrolimus) have substantially improved the treatment of AE.
Źródło:
Annals of Agricultural and Environmental Medicine; 2007, 14, 2
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Najczęściej występujące uszkodzenia fundamentów słupów linii elektroenergetycznych najwyższych napięć i sposoby ich napraw
The most common damage to the foundations of poles of extra high voltage power lines and the methods of their repair
Autorzy:
Witkowska-Dobrev, Joanna
Szlachetka, Olga
Brzezińska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/1064767.pdf
Data publikacji:
2020
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
trwałość konstrukcji
korozja
badanie pull-off
naprawa niekonstrukcyjna
badanie zagęszczenia gruntu
durability of structure
corrosion
pull-off test
non-structural repair
soil compaction test
Opis:
The paper consists of the discussion of issues related to the durability of foundations of extra high voltage (EHV) power line poles and possibilities of their renovation. The research part is the diagnostics of selected foundations of the EHV line poles (400 kV) Wielopole–Noszowice. During the on-site inspection, it was found that there are chipping and small surface defects, and in some cases losses of the reinforcement cover without visible pits. Based on the degree of damage, the scope of non-structural repairs and anti-corrosive protection was determined, presenting the next stages of their implementation.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2020, 29, 4; 461-473
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of changes in some design parameters on the dynamic properties of aircraft
Autorzy:
Wiśniewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/243891.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ground vibration test
modal analysis
aircraft structure dynamics
Opis:
The aim of the study presented in the paper was to examine the impact of changes related to aircraft modernization, the dynamic properties of an aircraft on the basis of five cases studied experimentally. Which changes in the dynamics of an aircraft structure occurred as a result of modernization can be experimentally tested by resonance tests. For this purpose, resonance tests should be carried out before the aircraft modernization and after its completion. In order to mapping the conditions of free flight the objects were suspended flexibly. The electrodynamics actuators were used to induce vibrations, piezoelectric transducers were used for the measurement of vibrations. The size and phase of extortion forces and their application points were selected individually for each resonance in order to get the best separation of it. The first stage of the study was based on recordings the frequency - amplitude characteristics. The second stage of the study was the Identification of individual frequencies and mode shapes of each resonance, which was implemented by choosing the size and the proportion of mutual phase shifts between the extortion forces. In the selection the criteria based on minimizing the phase difference of vibrations measured at several points of the structure were used. The final stage of this study was to register the frequency and shapes mode of the tested resonance and the resonance generalized masses and damping coefficients.
Źródło:
Journal of KONES; 2010, 17, 1; 479-483
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Innovationality is the transfer process from the idea to commercialization
Autorzy:
Wiśniewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/243893.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ground vibration test
modal analysis
aircraft structure dynamics
Opis:
In today's world, innovationality is synonymous with modernity, development, good governance and strategic thinking. The country 's economy and whole of society should be innovative. The research and development process and the results of the work would be reviewed from the commercialization perspective. The all innovative projects should finish on thefree market, but majority of them end their lives at the research and development stage. The idea of spin-off corporations has to serve the subordination of the entire innovative project realization cycle to the vision of its commercialization. Innovative society and economy require implementation of both large and small innovations, created in large, medium and small R & D programs. In economically leading countries, the mega-programs play an important role in innovationality. small innovation programs are usually created by small research teams and individual inventors. For the balanced development of the country's economy, there is a needfor the variety, both small and large innovation programs. In the absence of an effective opportunity to realize one's own Polish mega-programs, it is worth to consider the mega-program named: ,,Provision of services on the International research market" as a Polish specialty. For 10 years the Warsaw's Institute of Aviation pursues this strategy. The Institute of Aviation employs about 800 specialists, which perform the advanced research of the new materials and designs for the new gas turbine engines and combustion systems.
Źródło:
Journal of KONES; 2010, 17, 1; 485-488
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tensile validation tests with failure criteria comparison for various GFRP laminates
Walidacja testów rozciągania z porównaniem kryteriów zniszczenia dla różnych laminatów GFRP
Autorzy:
Wiczenbach, Tomasz
Ferenc, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/1852293.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
materiał kompozytowy
kryterium zniszczenia
laminat GFRP
próba rozciągania statyczna
walidacja
composite structure
failure criteria
GFRP laminate
unidirectional test
validation
Opis:
The paper studies the mechanical properties of glass fibre reinforced polymers (GFRP) with various types and orientation of reinforcement. Analyzed specimens manufactured in the infusion process are made of polymer vinyl ester resin reinforced with glass fibres. Several samples were examined containing different plies and various fibres orientation [0, 90] or [+45, –45]. To assess the mechanical parameters of laminates, a series of experimental tests were carried out. The samples were subjected to the uniaxial tensile tests, which allowed us to obtain substitute parameters, such as modulus of elasticity or strength. After all, results from experiments were used to validate the numerical model. A computational model was developed employing ABAQUS software using the Finite Element Method (FEM). The analysis was performed to verify and compare the results obtained from numerical calculations with the experiments. Additionally, the following failure criteria were studied, based on the index of failure IF Maximum Stress, Maximum Strain, Tsai-Hill, and Tsai-Wu. The results confirmed the assumptions made for the footbridge's design purpose, which is made using examined material. Moreover, comparing the experimental and numerical results found that in the linear-elastic range of the material, they are consistent, and there is no significant difference in results.
W artykule zbadano właściwości mechaniczne polimerów wzmocnionych włóknem szklanym (GFRP) o różnych typach i orientacji zbrojenia. Analizowane próbki, wytworzone w procesie infuzji, wykonane są z polimerowej żywicy winyloestrowej wzmocnionej włóknem szklanym. Zbadano kilka próbek zawierających różną liczbę warstw, a także różną orientację włókien [0/90] lub [+45/–45]. Aby ocenić parametry mechaniczne laminatów, przeprowadzono szereg badań eksperymentalnych. Próbki poddano testom jednoosiowego rozciągania, co pozwoliło uzyskać parametry zastępcze, takie jak moduł sprężystości czy wytrzymałość. Wyniki eksperymentów posłużyły do walidacji modelu numerycznego. Model obliczeniowy opracowano za pomocą oprogramowania ABAQUS z wykorzystaniem metody elementów skończonych (MES). Analizę przeprowadzono w celu zweryfikowania i porównania wyników otrzymanych z obliczeń numerycznych z wynikami eksperymentów. Dodatkowo zbadano następujące kryteria zniszczenia, w oparciu o wskaźnik zniszczenia IF: Maksymalne naprężenie, Maksymalne odkształcenie, Tsai-Hill i Tsai-Wu. Wyniki potwierdziły założenia przyjęte przy projektowaniu kładki, którą wykonano z badanego materiału. Ponadto porównując wyniki eksperymentalne i numeryczne stwierdzono, że w zakresie liniowo-sprężystym materiału są one spójne i nie ma istotnych różnic w wynikach.
Źródło:
Archives of Civil Engineering; 2021, 67, 3; 525-541
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the accuracy of the postural stability measurement with the Y-Balance Test based on the levels of the biomechanical parameters
Autorzy:
Walaszek, R.
Chwała, W.
Walaszek, K.
Burdacki, M.
Błaszczuk, J.
Powiązania:
https://bibliotekanauki.pl/articles/306519.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
biomechanika
staw kolanowy
stabilność postawy
testy
biomechanics
motor control
postural stability
Y-Balance Test
structure test
Opis:
The testing of dynamic balance involves tests that assess the muscle control of spatial changes of the position of the centre of gravity over the base of support. The purpose of this work was to determine the structure of the Y-balance test and its accuracy based on the measurements of strength performance of the muscles acting on the knee joint, as well as the flexibility and balance in boys aged 14 years. Methods: The study included 43 schoolboys regularly participating in physical education lessons. The examination of postural stability was conducted with the use of the Y-balance test. The measurements of muscle strength and of resistance to fatigue of the extensors and flexors of knee joints in isometric contraction were performed on a measurement stand in a standard position with the use of tensometric sensors. The measurement of mobility range of the lower extremity joints was performed according to the SFTR. The examination of balance was performed with the use of the modified ‘Flamingo balance test’. Results: The factor structure of the Y-balance test results for the left and right lower extremities is similar and includes five principal independent factors that characterise the structure of analysed variables. They explain 76% and 74% of communality in total for the left and the right extremity, respectively. Conclusions: The extracted factor structure points to a hybrid structure of the Y-balance test and shows its accuracy in the measurements of the lower limb joint mobility and strength performance of knee joint extensors.
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 2; 121-128
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie urządzeń ferromagnetycznych w diagnostyce konstrukcji budowlanych
Usage of ferromagnetic devices in the diagnostic activities regarding the buildings
Autorzy:
Urbanowicz, D.
Warzocha, M.
Powiązania:
https://bibliotekanauki.pl/articles/163405.pdf
Data publikacji:
2015
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja budowlana
diagnostyka
aparatura badawcza
element żelbetowy
pręt zbrojeniowy
wykrywanie
lokalizacja
otulina zbrojenia
pomiar grubości
skaner zbrojenia
dokładność pomiaru
building structure
diagnostics
test equipment
reinforced concrete element
reinforcing bar
detection
location
concrete cover
thickness measurement
rebar scaner
measurement accuracy
Opis:
W dobie dzisiejszych czasów konstruktorzy stają coraz częściej przed wyzwaniem zaprojektowania nadbudowy lub adaptacji istniejących budowli pod nowe obciążenia. Konieczne jest tym celu stosunkowo szybkie i ekonomiczne rozwiązanie w rozpoznaniu wszystkich elementów konstrukcji. W przypadku rozpoznania liczby i rozkładu prętów zbrojeniowych przydatne wydają się dostępne na rynku urządzenia ferromagnetyczne znane powszechnie pod nazwą skanery zbrojenia.
In recent times, the designers, more and more often, face the challenge of designing an additional part of the building or a challenge of adapting the building in a way that would make it possible for its structure to withstand the newly imposed loads. In order to face the above challenges, it is required to create solutions, quickly and economically, which would make it possible to recognize the structure in case of all of the construction elements. In case when a need arises to find out the number and the distribution of the reinforcing bars, ferromagnetic devices, which are commonly known as reinforcement scanners, are particularly usable.
Źródło:
Przegląd Budowlany; 2015, R. 86, nr 5, 5; 32-35
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie cyfrowej korelacji obrazu w badaniach elementów żelbetowych
Application of digital image correlation in reinforced concrete elements testing
Autorzy:
Tworzewski, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2160680.pdf
Data publikacji:
2022
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
cyfrowa korelacja obrazu
ARAMIS
system pomiarowy optyczny
konstrukcja żelbetowa
zarysowanie
deformacja
stanowisko badawcze
digital image correlation
optical measuring system
reinforced concrete structure
crack
deformation
test stand
Opis:
W artykule przedstawiono możliwości wykorzystania cyfrowej korelacji obrazu (Digital Image Correlation), a dokładniej systemu ARAMIS SRX w badaniach elementów żelbetowych. Przykładowe pomiary wykonano dla belki żelbetowej poddanej obciążeniu do zniszczenia. Obejmują one przemieszczenia, odkształcenia oraz zarysowanie na wybranych obszarach. Opisano również zastosowaną wersję systemu ARAMIS, zmiany i nowe funkcje wprowadzone względem starszych wersji.
The article presents using of Digital Image Correlation, and more specifically the ARAMIS SRX system, in the research of reinforced concrete elements. Exemplary measurements were made for a reinforced concrete beam subjected to a load to failure. New and old version of the ARAMIS system was described, as well as its changes and new functions introduced in relation to older versions.
Źródło:
Przegląd Budowlany; 2022, 93, 7-8; 103--106
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties of WE43 Magnesium Alloy Joint at Elevated Temperature
Właściwości mechaniczne złączy ze stopu magnezu WE43 w podwyższonej temperaturze
Autorzy:
Turowska, A.
Adamiec, J.
Powiązania:
https://bibliotekanauki.pl/articles/352707.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
WE43 magnesium alloy joint
tensile test
microstructure
fractography
structure degradation mechanism
odlewnicze stopy magnezu
próba rozciągania
mikrostruktura
degradacja struktury
fraktografia
Opis:
The WE43 cast magnesium alloy, containing yttrium and rare earth elements, remains stable at temperatures up to 300°C, according to the manufacturer, and therefore it is considered for a possible application in the aerospace and automotive. Usually, it is cast gravitationally into sand moulds and used for large-size castings that find application in the aerospace industry. After the casting process any possible defects that might appear in the casting are repaired with the application of welding techniques. These techniques also find application in renovation of the used cast elements and in the process of joining the cast parts into complex structures. An important factor determining the validity of the application of welding techniques for repairing or joining cast magnesium alloys is the structural stability and the stability of the properties of the joint in operating conditions. In the literature of the subject are information on the properties of the WE43 alloy or an impact of heat treatment on the structure and properties of the alloy, however, there is a lack of information concerning the welded joints produced from this alloy. This paper has been focused on the analysis the microstructure of the welded joints and their mechanical properties at elevated temperatures. To do this, tensile tests at temperatures ranging from 20°C to 300°C were performed. The tests showed, that up to the temperature of 150°C the crack occurred in the base material, whereas above this temperature level the rapture occurred within the weld. The loss of cohesion resulted from the nucleation of voids on grain boundaries and their formation into the main crack. The strength of the joints ranged from 150 MPa to 235 MPa, i.e. around 90 % of strength of the WE43 alloy after heat treatment (T6). Also performed a profilometric examination was to establish the shape of the fracture and to analyze how the temperature affected a contribution of phases in the process of cracking. It was found that the contribution of intermetallic phases in the process of cracking was three times lower for cracks located in the area of the weld.
Odlewniczy stop magnezu z itrem oraz innymi pierwiastkami ziem rzadkich WE43 może pracować wg producenta do temperatury 300°C, co czyni go stopem o dużej perspektywie rozwoju w zastosowaniach w przemyśle lotniczym i motoryzacyjnym. Najczęściej odlewany jest grawitacyjnie do form piaskowych i przeznaczony jest na odlewy wielkogabarytowe dla lotnictwa. Po procesie odlewania w odlewach mogą pojawić się wady, które naprawia się z zastosowaniem technologii spawalniczych. Technologie spawalnicze stosuję się również do regeneracji zużytych odlewów oraz do łączenia odlewów w konstrukcje. Istotnym czynnikiem decydującym o zasadności stosowania technologii spawalniczych do naprawy lub łączenia odlewów ze stopów magnezu jest stabilność strukturalna i stabilność właściwości złącza w warunkach eksploatacji. W literaturze można znaleźć informacje na temat właściwości stopu WE43, wpływu obróbki cieplnej na strukturę i właściwości, brak jest natomiast tych danych dla złączy spawanych. W pracy zbadano mikrostrukturę złączy oraz ich właściwości mechaniczne w podwyższonych temperaturach. W tym celu wykonano statyczną próbę rozciągania w zakresie temperatur od 20°C do 300°C. Stwierdzono, że zniszczenie do temperatury 150° C następuje w materiale rodzimym, a powyżej tej temperatury w spoinie. Utrata spójności jest wynikiem powstawania pustek w miejscach styku kryształów i ich łączenia się w pęknięcie główne. Wytrzymałość złączy była na poziomie od 150 MPa do 235 MPa, tj. ok. 90 % wytrzymałości stopu WE43 po obróbce cieplnej (T6). Dodatkowo wykonano badania profilometryczne mające na celu ustalenie kształtu przełomu oraz zbadanie wpływu temperatury na udział faz w procesie pękania. Stwierdzono, że udział faz międzymetalicznych w procesie pękania jest trzykrotnie mniejszy dla pęknięć, które są w obszarze spoiny.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 4; 2695-2702
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examination of Cast Iron Material Properties by Means of the Scratch Method
Autorzy:
Trytek, A.
Orłowicz, W.
Mróz, M.
Tupaj, M.
Powiązania:
https://bibliotekanauki.pl/articles/382221.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
structure
GTAW process
scratch test
żeliwo
struktura
proces GTAW
test zarysowania
Opis:
The paper presents results of examination of unalloyed cast iron with diversified structure of the metallic matrix carried out by means of the scratch method. The research work was carried out with cast sample plates and with castings superficially remelted by means of the Gas Tungsten Arc Welding (GTAW) method. The test was carried out with load force of 5 N. Parameters such as the coefficient of friction, penetration depth, and acoustic emission were analysed.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2s; 75-80
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie wytrzymałości na ściskanie betonu w konstrukcji
Research of compressive strength of concrete in structural applications
Autorzy:
Szpetulski, J.
Powiązania:
https://bibliotekanauki.pl/articles/160559.pdf
Data publikacji:
2016
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja betonowa
beton wbudowany
wytrzymałość na ściskanie
próbka badawcza
próbka rdzeniowa
lokalizacja
concrete structure
built-in concrete
compressive strength
test sample
core sample
location
Opis:
W artykule przedstawiono wyniki z niszczących i nieniszczących badań wytrzymałości na ściskanie betonu w konstrukcji. Porównano niszczące badania wytrzymałości na ściskanie próbek wyciętych z poszczególnych wysokości odwiertów pobranych prostopadle do kierunku betonowania z średnią wytrzymałością na ściskanie normowych próbek sześciennych i z wynikami nieniszczących badań wytrzymałości na ściskanie odwiertów rdzeniowych. Zobrazowano również wpływ wielkości średnicy odwiertu na wyniki niszczących badań wytrzymałości na ściskanie betonu w konstrukcji.
The article presents results of destructive and non-destructive research regarding the compressive strength of concrete in structural applications. A comparison has been made between destructive research of compressive strength, regarding samples taken from boreholes at different heights, perpendicularly to the direction of concreting, with average compressive strength of cuboid norm samples and with results of non-destructive research of compressive strength of cored boreholes. The herein paper also discusses the impact of the borehole diameter on results of destructive research of compressive strength of concrete in structural applications.
Źródło:
Przegląd Budowlany; 2016, R. 87, nr 3, 3; 21-24
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie taśm CFRP do wzmacniania stalowych elementów profilowanych na zimno
The use of CFRP tapes for reinforcement of cold-formed steel elements
Autorzy:
Szewczak, Ilona
Reszuta, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/973556.pdf
Data publikacji:
2020
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
taśma CFRP
wzmacnianie
element stalowy
stal formowana na zimno
konstrukcja cienkościenna
badanie laboratoryjne
zniszczenie
nośność
CFRP tape
strengthening
steel element
cold-formed steel
thin-walled structure
laboratory test
damage
load capacity
Opis:
W niniejszej pracy przedstawiono wybrane zagadnienia związane ze wzmacnianiem stalowych elementów profilowanych na zimno taśmami CFRP. W pierwszej części pracy dokonano przeglądu literatury i przedstawiono podstawowe informacje dotyczące stalowych elementów cienkościennych profilowanych na zimno oraz materiałów kompozytowych CFRP, podkreślając zalety i wady wykorzystania ich do wzmacniania konstrukcji stalowych. Następnie przedstawiono opublikowane, własne badania naukowe dotyczące wpływu długości zakotwienia taśm CFRP i ich lokalizacji na nośność i efektywność wzmacniania stalowych belek cienkościennych typu sigma.
This paper presents selected issues related to the reinforcement of cold-formed steel elements with CFRP tapes. In the first part of the work, the literature was reviewed and basic information on coldformed thin-walled steel elements and CFRP composite materials, emphasizing the advantages and disadvantages of using them to reinforce steel structures was presented. Moreover, published, own scientific research on the influence of effective anchorage length of the CFRP tape and their location on the load capacity and on the effectiveness of strengthening thin-walled steel beams of the sigma type with CFRP composites was presented.
Źródło:
Przegląd Budowlany; 2020, 91, 11; 55-60
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plasticity properties of advanced high-strength steel weld construction of transport means - simulation by the MESH-free method
Autorzy:
Szczucka-Lasota, Bożena
Uściłowska, Anita
Węgrzyn, Tomasz
Łazarz, Bogusław
Powiązania:
https://bibliotekanauki.pl/articles/2203909.pdf
Data publikacji:
2022
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
civil engineering and transport
AHSS steel welding
bending test
metallographic structure
mechanical resistance
method of fundamental solutions
inżynieria lądowa i transport
spawanie stali AHSS
próba zginania
struktura metalograficzna
odporność mechaniczna
metoda rozwiązań podstawowych
Opis:
Advanced high-strength steel (AHSS) is being used increasingly often in the structure of means of transport. Welds made of these steels can crack in the heat-affected zone (HAZ) and have inferior mechanical properties compared to the base material. The goal of this paper was to solve the technological and material problem of obtaining highstrengh thin-walled welded structures of AHSS steel designed for heavily loaded elements of transport means. The novelty of the article is its presentation of a modified welding process which enables a high-strength structure of the obtained joint to be obtained without welding defects and incompatibilities. Copper backing was selected as an effective method of heat dissipation in the process, and, using the basic solutions method, the leverage of a heat flow process in the weld method deposit (WMD) was checked after cooling down the substrate. The fundamental solutions method was used to determine the optimal shape of the backing. It has been shown that the new backing affects the structure and mechanical properties of welds. In order to verify the newly developed method, tensile tests of the obtained joint were carried out, the hardness was assessed, the metallographic structure was analyzed, and non-destructive tests were performed. The developed material and technological solution were used, for example, for the construction of the arm element of the mobile platform.
Źródło:
Transport Problems; 2022, 17, 3; 39--50
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies