Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "structure element" wg kryterium: Temat


Tytuł:
Simulations and tests of composite marine structures under low-velocity impact
Autorzy:
Zhu, Zhaoyi
Li, Xiaowen
Chen, Qinglin
Cai, Yingqiang
Xiong, Yunfeng
Powiązania:
https://bibliotekanauki.pl/articles/1573692.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
low-velocity impact
marine structure
composites
test
finite element analysis
Opis:
Due to their excellent performance, composite materials are increasingly used in the marine field. It is of great importance to study the low-velocity impact performance of composite laminates to ensure the operational safety of composite ship structures. Herein, low-velocity drop-weight impact tests were carried out on 12 types of GRP laminates with different layup forms. The impact-induced mechanical response characteristics of the GRP laminates were obtained. Based on the damage model and stiffness degradation criterion of the composite laminates, a low-velocity impact simulation model was proposed by writing a VUMAT subroutine and using the 3D Hashin failure criterion and the cohesive zone model. The fibre failure, matrix failure and interlaminar failure of the composite structures could be determined by this model. The predicted mechanical behaviours of the composite laminates with different layup forms were verified through comparisons with the impact test results, which revealed that the simulation model can well characterise the low-velocity impact process of the composite laminates. According to the damage morphologies of the impact and back sides, the influence of the different layup forms on the low-velocity impact damage of the GRP laminates was summarised. The layup form had great effects on the damage of the composite laminates. Especially, the outer 2‒3 layers play a major role in the damage of the impact and the back side. For the same impact energy, the damage areas are larger for the back side than for the impact side, and there is a corresponding layup form to minimise the damage area. Through analyses of the time response relationships of impact force, impactor displacement, rebound velocity and absorbed energy, a better layup form of GRP laminates was obtained. Among the 12 plates, the maximum impact force, absorbed energy and damage area of the plate P4 are the smallest, and it has better impact resistance than the others, and can be more in line with the requirements of composite ships. It is beneficial to study the low-velocity impact performance of composite ship structures.
Źródło:
Polish Maritime Research; 2021, 1; 59-71
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of structural solutions of reinforced concrete tanks used in agricultural farms
Autorzy:
Żakowicz, Anna
Zimiński, Kamil
Obolewicz, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/2201991.pdf
Data publikacji:
2023
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
organic waste tank
reinforced concrete structure
tightness
durability
FEM
finite element method
zbiornik na odpady organiczne
żelbetowa konstrukcja
szczelność
trwałość
MES
metoda elementów skończonych
Opis:
The article presents the types of the most common underground or partially sunken tanks used on farms. The analyzed tanks were designed for the storage of zoonotic fertilizers. Solid or semi-liquid fertilizers should be stored in livestock premises in sealed tanks, protected from leakage into the ground. Basic static schemes of tanks and types of loads acting on tanks were considered. The durability and leak-tightness of the tanks were also addressed, and the insulation used to protect the walls and bottom plate of the tanks was discussed. A computational example presents the values of loads acting on the various elements of the tank at two computational schemes, and compares the results obtained by two computational methods, i.e., the separated plate method and the finite element method. The discrepancies in the obtained results were pointed out. Recommendations were formulated for the design of tanks in terms of meeting the tightness criterion. FEM calculations were made for two cases: with and without consideration of the soil stiffness.
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2023, 1; 22--32
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physical elements of heritage buildings: study of the Kadariah Palace in Pontianak City, West Kalimantan
Elementy fizyczne obiektów zabytkowych. Studium pałacu Kadariah w mieście Pontianak w zachodnim Kalimantanie
Autorzy:
Zain, Zairin
Norita, Norita
Andi, Andi
Powiązania:
https://bibliotekanauki.pl/articles/24200992.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Konserwatorów Zabytków
Tematy:
Kadariah Palace
physical element,
Malay architecture
wooden structure
Pałac Kadariah
element fizyczny
architektura malajska
konstrukcja drewniana
Opis:
The use of wood materials as a characteristic of Malay architecture is related to local socio-cultural and environmental factors. The wood type used in traditional Malay structures has endured for hundreds of years, but in a state of decreased strength due to its being continuously exposed to biotic and abiotic harm factors. Documentation of the physical elements and identification of the current condition of the Kadariah Palace could preserve the value of the heritage building for future generations. The data was collected by field observation to be interpreted by applying a qualitative descriptive approach. The construction of the Kadariah Palace with structural, non-structural, and decorative ornaments is indicated by the physical elements of its appearance. The belian wood was used as a building material, which impacted the deterioration of the exteriors by biological and non-biological damage factors. The biological damage factor is caused by white rot, while non-biological damage factors are caused by weather, thermal, and mechanical factors.
Wykorzystanie materiałów drzewnych jako cechy charakterystycznej architektury malajskiej wiąże się z lokalnymi czynnikami społeczno-kulturowymi i środowiskowymi. Gatunek drewna stosowany w tradycyjnych strukturach malajskich zapewnia setki lat trwałości, ale ma zmniejszoną wytrzymałość przez ciągłe narażenie na biotyczne i abiotyczne czynniki. Dokumentacja elementów fizycznych i identyfikacja obecnego stanu pałacu Kadariah pozwalają zachować wartość zabytkowego budynku dla przyszłych pokoleń. Dane zebrane w trakcie badań terenowych zostały zinterpretowane przez zastosowanie jakościowego podejścia opisowego. Ornament konstrukcyjny, niekonstrukcyjny i dekoracyjny składają się na fizyczne elementy wyglądu pałacu. Drewno belian zostało użyte jako materiał budowlany, co wpłynęło na niszczenie elewacji przez czynniki biologiczne i niebiologiczne. Uszkodzenia biologiczne powodowane są białą zgnilizną drewna, natomiast czynniki niebiologiczne to wpływy pogodowe, termiczne i mechaniczne.
Źródło:
Wiadomości Konserwatorskie; 2022, 72; 89--100
0860-2395
2544-8870
Pojawia się w:
Wiadomości Konserwatorskie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O staropolskich i późniejszych derywatach i frazeologizmach z elementem skoro (z uwzględnieniem tła słowiańskiego)
On old Polish and later derivatives and idioms with the skoro element (considering the slavic background)
Autorzy:
Wronkowska-Dimitrowa, Mirosława
Powiązania:
https://bibliotekanauki.pl/articles/1595561.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Szczeciński. Wydawnictwo Naukowe Uniwersytetu Szczecińskiego
Tematy:
history of words
derivative and category and meaning changes of the element and its structure’ frequency of derivatives throughout the ages and the external history of the Polish language
frekwencja derywatów na przestrzeni wieków a historia zewnętrzna języka polskiego
historia wyrazów
derywat a zmiany kategorialne i znaczeniowe elementu jego struktury
Opis:
The article presents and comments (based on material coming from Polish language dictionaries of Old Polish time, the 16th as well as 19th and 20th century, and also Old Slavonic background) on semantic transformation, in which the word forasmuch as underwent in its history: from independent word – adverb of meaning ‘quick, fast’ to the role of functional word – a conjunction ‘when, as’ that introduces a time subordinate clause or ‘if, because’ that introduces a condition or cause subordibate clause. The categorial transformation of the ‘forasmuch as’ word becomes a basis to explain a vivacity of derivatives from this word and declining the meaning shifts in them. Diversity in the space of centuries in derivatives’ attendance and semantics with component ‘forasmuch as’ is connected with external history of Polish language (main Eastern Slavic infl uances).
Źródło:
Studia Językoznawcze; 2013, 12; 237-245
1730-4180
2353-3161
Pojawia się w:
Studia Językoznawcze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling and analysis of free vibration of steel-concrete composite beams by finite element method
Modelowanie i analiza drgań własnych stalowo-betonowych belek zespolonych metodą elementów skończonych
Autorzy:
Wróblewski, T.
Pełka-Sawenko, A.
Abramowicz, M.
Berczyński, S.
Powiązania:
https://bibliotekanauki.pl/articles/175703.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
konstrukcja zespolona
identyfikacja parametrów
Abaqus
MATLAB
SPRING2
metoda elementów skończonych
MES (metoda elementów skończonych)
composite structure
parameters identification
ABAQUS
finite element method
FEM
Opis:
Most technological machines generate vibrations which are transferred to either support systems or foundations. To ensure an object's safe operation, it is necessary to have adequate knowledge about dynamic properties of both machines and a supporting construction. A steel-concrete composite floor is an example of a supporting construction. It consists of steel beams connected with a reinforced concrete slab in a way that enables mating of both elements. This paper presents a discreet model of a steel-concrete composite beam that takes into account flexibility of the connection. An analysis of the beam's natural vibrations was conducted and the results were compared with those of experimental studies. Tests were performed on two sets of beams. In the first group of beams B1 a connection that consisted of steel stud connectors was used whereas perforated steel slats was used in the second groups of beams B2. The present paper is a report from the analysis that was conducted on the beams from group B2. The beam model was developed on Abaqus platform using deformable finite element method. Matlab system was used for the analysis and its environment was applied to control the model development and to identify the model's selected parameters. The beam model was made in two versions that differ in the approach to modelling connection. The developed model, after parameter identification, yields highly consistent results with those of experimental tests.
Większość urządzeń technicznych wytwarza drgania, które przekazywane są na konstrukcje wsporcze lub fundamenty. W celu zapewnienia bezpiecznej eksploatacji obiektu niezbędne jest uwzględnienie właściwości dynamicznych zarówno maszyn, jak i konstrukcji wsporczej. Konstrukcją wsporczą jest na przykład stalowo-betonowy strop zespolony. Składa się z belek stalowych połączonych z płytą żelbetową w sposób umożliwiający współpracę obydwu tych elementów. W artykule przedstawiono model obliczeniowy stalowo-betonowej belki zespolonej uwzględniający podatność zespolenia. Prowadzono analizę jej drgań własnych i jej wyniki porównano z wynikami wykonanych badań doświadczalnych dla dwóch grup belek. W pierwszej grupie B1 stosowano zespolenie stalowymi sworzniami zespalającymi. W drugiej natomiast B2 stosowano zespolenie stalowymi listwami perforowanymi. W pracy analizie poddano belki z grupy B2. Model belki opracowano w systemie Abaqus wykorzystującym metodę odkształcalnych elementów skończonych. Do analizy stosowano oprogramowanie Matlab sterowania procesem przygotowania modelu oraz identyfikacją wybranych jego parametrów. Model belki opracowano w dwóch wersjach różniących się sposobem modelowania zespolenia. Użyto go także do identyfikacji parametrów. Uzyskano wyniki symulacji częstotliwości drgań o dużej zgodności z wynikami badań doświadczalnych.
Źródło:
Advances in Manufacturing Science and Technology; 2012, 36, 4; 85-96
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic loads on the roof plate of the wheeled carrier during the firing of a 30 mm cannon
Autorzy:
Wiśniewski, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/2200808.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
finite element method
armoured personnel carrier
shock load
structure
stresses
Opis:
On the battlefield, modern vehicles perform a variety of roles. Transportation is one of the most fundamental. Operating in different terrains, including urban areas, means exposing the crew to different hazards. To increase crew protection, passive and active protection systems are used. On the other hand, in addition to protection, support of the infantry in offensive operations is an equally important activity. The most common solution for medium wheeled vehicles is a manned turret. The weapon is a 30 mm cannon. Nowadays, there is a trend towards installing systems that allow such weapons to be operated remotely. This minimises the exposure of highly trained personnel. This paper presents the results of a numerical study of the dynamic loads on the roof-plate structure of a wheeled armoured personnel carrier resulting from the firing of the vehicle's main armament. It includes the values of the strains and stresses in the upper plate structure and the forces transmitted by the brackets connecting the roof plate to the bottom plate, and an assessment of the risk of using such a system on the safety of the vehicle structure and its crew.
Źródło:
Archiwum Motoryzacji; 2023, 99, 1; 53--65
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kształtowanie profili cienkościennych wspomagane laserowo
Laser-assisted forming of thin-walled profiles
Autorzy:
Widłaszewski, J.
Nowak, Z.
Nowak, M.
Kurp, P.
Powiązania:
https://bibliotekanauki.pl/articles/211429.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Obróbki Plastycznej
Tematy:
kształtowanie laserowe
metoda elementów skończonych
konstrukcja cienkościenna
laser forming
finite element method
thin-walled structure
Opis:
W ostatnich latach badane są procesy kształtowania plastycznego z wykorzystaniem lokalnego nagrzewania laserowego. Nagrzewanie ma na celu umożliwienie lub ułatwienie obróbki plastycznej materiałów, które wykazują niekorzystne właściwości, jak: kruchość, silne efekty umocnienia czy powrotnego odkształcenia sprężystego. Zaprezentowane badania dotyczą hybrydowego termo-mechanicznego kształtowania plastycznego elementów cienkościennych z użyciem lokalnego nagrzewania materiału wiązką laserową. Docelowo prace są nakierowane na formowanie elementów ze stopów wykorzystywanych w przemyśle lotniczym takich, jak nadstopy niklu Inconel 625, Inconel 718, a także wysokostopowe stale martenzytyczne AISI 410 i AISI 325. Wstępne badania przeprowadzono z użyciem stali nierdzewnej X5CrNi18-10. Prace eksperymentalne i symulacje numeryczne objęły zachowanie się płaskowników o grubości 1 mm, poddanych działaniu obciążenia mechanicznego w układzie wysięgnikowym i nagrzewanych wiązką lasera CO2, przemieszczaną od swobodnego końca próbki do miejsca jej zamocowania. Doświadczalnie wykazano możliwość stosunkowo łatwego uzyskiwania dużych deformacji giętnych dzięki zastosowaniu nagrzewania laserowego. Zweryfikowane eksperymentalnie symulacje numeryczne, które wykonano metodą elementów skończonych, ujawniły intensywne płynięcie plastyczne warstwy ogrzewanej wiązką laserową. Towarzyszyło temu przemieszczanie się osi obojętnej przekroju. W kolejnym etapie badane było gięcie rur cienkościennych na specjalnie skonstruowanym stanowisku. Umożliwia ono kontrolowane wprowadzanie obciążenia mechanicznego, ogrzewanie materiału ruchomą wiązką laserową i wymuszanie zadanej deformacji zgodnie ze schematem kinematycznym urządzenia.
Forming processes assisted by localised laser heating are studied in recent years. Heating is used to make it possible or facilitate forming of materials, which exhibit such adverse properties as: brittleness, effects of high work-hardening or a high elastic spring-back. The hereby presented investigations concern the hybrid thermo-mechanical forming of thin-walled parts using local heating of the material by the laser beam. The research is aimed at forming of parts from materials used in the aviation industry, such as the nickel-base super-alloys Inconel 625, Inconel 718, and also martensitic super-alloys AISI 410 and AISI 325. Preliminary investigations are conducted using X5CrNil8-10 (1.4301) stainless steel. Experimental study and numerical simulations cover the behaviour of thin beams 1 mm thick, subjected to mechanical load in the cantilever arrangement and heated by the CO2 laser beam moving from the free end of the sample towards its fixture. The possibility of obtaining large bending deformations relatively easily due to the application of laser beam is demonstrated experimentally. Experimentally verified finite element numerical simulations show the intense plastic flow of the material layer heated by the laser beam. It is accompanied by a shift of the cross-section neutral axis of the beam. Bending of thin-walled tubes in a specially designed device is studied in the next step. It allows introducing mechanical loading in a controlled manner, heating the material by a moving laser beam and forcing the required deformation according to the kinematic scheme of the device.
Źródło:
Obróbka Plastyczna Metali; 2017, 28, 3; 183-198
0867-2628
Pojawia się w:
Obróbka Plastyczna Metali
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Goal-oriented mesh adaptivity for fluid-structure interaction with application to heart-valve settings
Metody adaptacji siatki w zagadnieniu oddziaływania płyn-struktura (FSI) w zastosowaniu do symulacji przepływu przez zastawkę serca
Autorzy:
Wick, T.
Powiązania:
https://bibliotekanauki.pl/articles/139712.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dynamika zastawki serca
fale elastyczne
metoda arbitrary Lagrangian-Eulerian
ALE
metoda elementów skończonych
oddziaływanie płyn-struktura
FSI
zorientowana na cel adaptacja siatki
heart-valve dynamics
elastic waves
arbitrary Lagrangian Eulerian method
finite element method
fluid-structure interaction
goal-oriented mesh adaption
Opis:
We apply a fluid-structure interaction method to simulate prototypical dynamics of the aortic heart-valve. Our method of choice is based on a monolithic coupling scheme for fluid-structure interactions in which the fluid equations are rewritten in the 'arbitrary Lagrangian Eulerian' (ALE) framework. To prevent the backflow of structure waves because of their hyperbolic nature, a damped structure equation is solved on an artificial layer that is used to prolongate the computational domain. The increased computational cost in the presence of the artificial layer is resolved by using local mesh adaption. In particular, heuristic mesh refinement techniques are compared to rigorous goal-oriented mesh adaption with the dual weighted residual (DWR) method. A version of this method is developed for stationary settings. For the nonstationary test cases the indicators are obtained by a heuristic error estimator, which has a good performance for the measurement of wall stresses. The results for prototypical problems demonstrate that heart-valve dynamics can be treated with our proposed concepts and that the DWR method performs best with respect to a certain target functional.
W artykule przedstawiono analizę zagadnienia oddziaływania płyn-struktura (FSI) w komputerowej symulacji pracy zastawki serca. Przedstawiono monolityczne sformułowanie tego zagadnienia, w którym równania dla struktury i płynu rozwiązywane są w pełnym sprzężeniu, przy czym do opisu ruchu płynu stosowane jest podejście typu Arbitrary Lagrangian-Euelerian (ALE). Zaproponowano metodę eliminacji zjawiska niefizycznego odbicia fal odkształceń struktury, polegającą na wprowadzeniu sztucznej dyssypacji energii tych fal w części brzegu obszaru położonej za zastawkami. W celu zwiększenia efektywności obliczeniowej wprowadzono lokalną adaptację siatki. W szczególności, porównano heurystyczne techniki adaptacji siatki z techniką opartą na wykorzystaniu ważonego residuum sprzężonego (Dual Weighted Residual, DWR). Przedstawiono wyniki obliczeń testowych demonstrujące poprawność zaproponowanego podejścia oraz skuteczność metody adaptacyjnej DWR.
Źródło:
Archive of Mechanical Engineering; 2012, LIX, 1; 73-99
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computational analysis of statics and dynamics of complex structures by finite element method
Analiza komputerowa statyki i dynamiki konstrukcji złożonych metodą elementów skończonych
Autorzy:
Weber, H.
Hien, T. D.
Powiązania:
https://bibliotekanauki.pl/articles/151573.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
konstrukcja złożona
dynamika
tłumienie Rayleigha
element skończony
complex structure
dynamics
Rayleigh's damping
finite element
Opis:
A finite element model of complex structures is formulated in the paper. Equations of motion are presented. The material and geometrical input data of a suspended bridge, modeled as a cable-beam-shell system, is described and the impact-type loading is assumed. Structural and computational aspects of the system at hand are discussed in detail via illustrating numerical results.
W pracy sformułowano model elementów skończonych dla konstrukcji złożonych. Zaprezentowano układ równań ruchu. Opisano materiałowe i geometryczne dane wejściowe dotyczące przykładowego mostu podwieszonego, zamodelowanego jako układ kablowo-belkowo-powłokowy. Przyjęto obciążenie dynamiczne typu nagłego uderzenia. Aspekty konstrukcyjne oraz komputerowe rozpatrywanego układu przedyskutowano szczegółowo przez ilustrujące wyniki liczbowe.
Źródło:
Pomiary Automatyka Kontrola; 2009, R. 55, nr 6, 6; 357-360
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Attenuation Characteristics of Vibration in a Locally Resonant Phononic Crystal Frame Structure
Autorzy:
Wang, Yukun
Qian, Denghui
Wu, Jinghong
He, Feiyang
Powiązania:
https://bibliotekanauki.pl/articles/176756.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
LRPC frame structure
high-rise building
finite element method
vibration insulation
noise reduction
Opis:
In this paper, a frame structure based on the locally resonant (LR) mechanism of phononic crystals (PCs) is designed on account of the wide application of frame structures in high-rise buildings, and the band structures, displacement fields of eigenmodes, and transmission power spectrums of corresponding finite structure are calculated by finite element (FE) method. Numerical results and further analysis demonstrate that a full band gap with low starting frequency can be opened by the frame structure formed by periodically combining soft and hard materials, and the starting frequency can be further lowered with the adjustment of corresponding geometric parameters, which provides a theoretical basis for the studies on vibration insulation and noise reduction of high-rise buildings.
Źródło:
Archives of Acoustics; 2020, 45, 3; 557-562
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigation of the basilar membrane vibration induced by the unsteady fluid flow in the human inner ear
Autorzy:
Wahl, Philipp
Ziegler, Pascal
Eberhard, Peter
Powiązania:
https://bibliotekanauki.pl/articles/1845019.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
human cochlea
basilar membrane
unsteady viscous fluid flow
fluid-structure interaction
pressure-displacement-based fluid element
viscous boundary layer
tonotopy
auditory threshold
ludzki ślimak
membrana podstawna
niestabilny przepływ cieczy lepkiej
interakcja płyn-struktura
element hydrauliczny oparty na ciśnieniu wyporowym
lepka warstwa graniczna
tonotopia
próg słyszalności
Opis:
For a deeper understanding of the inner ear dynamics, a Finite-Element model of the human cochlea is developed. To describe the unsteady, viscous creeping flow of the liquid, a pressure-displacement-based Finite-Element formulation is used. This allows one to efficiently compute the basilar membrane vibrations resulting from the fluid-structure interaction leading to hearing nerve stimulation. The results show the formation of a traveling wave on the basilar membrane propagating with decreasing velocity towards the peaking at a frequency dependent position. This tonotopic behavior allows the brain to distinguish between sounds of different frequencies. Additionally, not only the middle ear, but also the transfer behavior of the cochlea contributes to the frequency dependence of the auditory threshold. Furthermore, the fluid velocity and pressure fields show the effect of viscous damping forces and allow us to deeper understand the formation of the pressure difference, responsible to excite the basilar membrane.
Źródło:
Archive of Mechanical Engineering; 2020, LXVII, 4; 381-414
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the optimization methods to the search of marine propulsion shafting global equilibrium in running condition
Autorzy:
Ursolov, Aleksandr
Batrak, Yuriy
Tarelko, Wieslaw
Powiązania:
https://bibliotekanauki.pl/articles/258800.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
marine propulsion shafting
bearing lubrication
fluid-structure interaction
finite-element method
optimization
Opis:
Full- film hydrodynamic lubrication of marine propulsion shafting journal bearings in running condition is discussed. Considerable computational difficulties in non-linear determining the quasi-static equilibrium of the shafting are highlighted. To overcome this problem the approach using two optimization methods (the particle swarm method and the interior point method) in combination with the specially developed relaxation technique is proposed. The developed algorithm allows to calculate marine propulsion shafting bending with taking into account lubrication in all journal bearings and exact form of journal inside bearings, compared to results of most of the publications which consider lubrication only in the aft most stern tube bearing and assume rest of bearings to be represented by points. The calculation results of typical shafting design with four bearings are provided. The significance of taking into account lubrication in all bearings is shown, specifically more exact values of bearings’ reactions, shafting deflections, minimum film thickness and maximum hydrodynamic pressure in the stern tube bearing in case of considering lubrication in all bearings.
Źródło:
Polish Maritime Research; 2019, 3; 172-180
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie urządzeń ferromagnetycznych w diagnostyce konstrukcji budowlanych
Usage of ferromagnetic devices in the diagnostic activities regarding the buildings
Autorzy:
Urbanowicz, D.
Warzocha, M.
Powiązania:
https://bibliotekanauki.pl/articles/163405.pdf
Data publikacji:
2015
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja budowlana
diagnostyka
aparatura badawcza
element żelbetowy
pręt zbrojeniowy
wykrywanie
lokalizacja
otulina zbrojenia
pomiar grubości
skaner zbrojenia
dokładność pomiaru
building structure
diagnostics
test equipment
reinforced concrete element
reinforcing bar
detection
location
concrete cover
thickness measurement
rebar scaner
measurement accuracy
Opis:
W dobie dzisiejszych czasów konstruktorzy stają coraz częściej przed wyzwaniem zaprojektowania nadbudowy lub adaptacji istniejących budowli pod nowe obciążenia. Konieczne jest tym celu stosunkowo szybkie i ekonomiczne rozwiązanie w rozpoznaniu wszystkich elementów konstrukcji. W przypadku rozpoznania liczby i rozkładu prętów zbrojeniowych przydatne wydają się dostępne na rynku urządzenia ferromagnetyczne znane powszechnie pod nazwą skanery zbrojenia.
In recent times, the designers, more and more often, face the challenge of designing an additional part of the building or a challenge of adapting the building in a way that would make it possible for its structure to withstand the newly imposed loads. In order to face the above challenges, it is required to create solutions, quickly and economically, which would make it possible to recognize the structure in case of all of the construction elements. In case when a need arises to find out the number and the distribution of the reinforcing bars, ferromagnetic devices, which are commonly known as reinforcement scanners, are particularly usable.
Źródło:
Przegląd Budowlany; 2015, R. 86, nr 5, 5; 32-35
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Specyfika wzmacniania elementów ściskanych doklejanymi materiałami kompozytowymi CFRP
Specific features of the reinforcement of compressed elements with applied CFRP composite materials
Autorzy:
Trapko, T.
Trapko, W.
Powiązania:
https://bibliotekanauki.pl/articles/162666.pdf
Data publikacji:
2011
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja betonowa
wzmacnianie konstrukcji
taśma CFRP
mata CFRP
element ściskany
nośność
odporność termiczna
odporność zmęczeniowa
concrete structure
structure reinforcing
CFRP tape
CFRP mat
compression member
load bearing capacity
thermal resistance
fatigue resistance
Opis:
Jak pokazują dotychczasowe doświadczenia efekty stosowania materiałów kompozytowych do wzmacniania elementów ściskanych mogą być zarówno pozytywne, ale jak również negatywne. Jeżeli nie będzie się rozsądnie i z pełnym rozpoznaniem stosować kompozytów węglowych CFRP można "stracić kontrolę" nad konstrukcją a prognozowany stan odkształcenia i nośności nie będą odpowiadały rzeczywistości. W przypadku tej ciągle nowej metody nie obowiązuje, często stosowana przez inżynierów konstruktorów zasada: "więcej - znaczy lepiej".
Experience has shown that using composite materials to reinforce compressed elements may have both favourable and unfavourable effects. CFRP carbon composites must be used rationally and with proper analysis of the situation, otherwise it is possible to "lose control" of the structure, and the projected deformation state and load capacity will not correspond to reality. In the case of this still new method, the "more is better" rule often assumed by structural engineers does not apply.
Źródło:
Przegląd Budowlany; 2011, R. 82, nr 7-8, 7-8; 46-49
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of design technique of track machines bodies bearing structures
Doskonalenie technologii projektowania układów nośnych korpusów maszyn do obsługi torów kolejowych
Autorzy:
Tovt, B.
Powiązania:
https://bibliotekanauki.pl/articles/374930.pdf
Data publikacji:
2012
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
optymalizacja
procedura numeryczna
rzutowanie gradientu
metoda elementów skończonych
struktura łożyska
korpus
trwałość
optimization
numerical procedure
gradient projection
finite element method
bearing structure
body
durability
deflected mode
track machine
Opis:
The paper is devoted to improvement of design technique of track machines bodies bearing structures. The review and analysis of state-of-the-art of the mathematical programming theory and the optimal designing are done. The numerical optimization procedure for track machines bodies bearing structures is proposed. The approbation of the proposed procedure is taken on structural optimization problems. Mathematical aspects of proposed procedure implementation are investigated, particularly the algorithm convergence and the sensitivity analysis of initial designs. Deflected mode of the ballast leveling machine SPZ-5/UA body bearing structure was investigated analytically (FEM study) and experimentally (trial running inspection on durability). The necessity of optimization implementation for bodies bearing structures is substantiated. The rational design of track machine SPZ-5/UA bearing structure was obtained with the numerical optimization procedure proposed in the paper. The deflected mode of the body rational bearing structure was investigated.
Źródło:
Transport Problems; 2012, 7, 3; 95-107
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies