Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "steel bridge" wg kryterium: Temat


Wyświetlanie 1-72 z 72
Tytuł:
Mechanical behavior of soil-steel structure subjected to live loads and different water conditions
Autorzy:
Łydżba, D.
Różański, A.
Sobótka, M.
Stefaniuk, D.
Chudy, G.
Wróblewski, T.
Powiązania:
https://bibliotekanauki.pl/articles/383504.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
soil-steel structure
soil-steel bridge
bridge
dry anti-flood reservoir
Opis:
The paper describes the analysis of a three-span soil-steel bridge along the road section crossing a dry anti-flood reservoir. The structure can be occasionally filled with water. The authors investigate internal forces and stresses in the shells due to live loads at different water conditions. Finite element simulations are carried out assuming elastic-plastic behavior of soil, elastic shell and nonlinear (frictional) contact zone. The analysis takes into account soil load history. In particular, the construction and operation of the bridge under quasi-static live loads is considered. The construction stage includes laying and compaction of the backfill. Then, the bridge in operation is investigated at three different water conditions: normal use (dry reservoir), maximum water level (flood) and lowering of the water level in the reservoir. The results show that during the flood the maximum stress in the shell significantly increases. Moreover, some of non-linear effects, typical in such structures, e.g. hysteretic effect, become more evident in comparison to normal use of the bridge.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 23; 163-174
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Produkty stalowe na wymiar
Steel products tailored to the needs
Autorzy:
Burska, A.
Powiązania:
https://bibliotekanauki.pl/articles/365387.pdf
Data publikacji:
2016
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
stal
pale
most stalowy
fundamenty
steel
piles
steel bridge
foundations
Opis:
Jednym z tematów drugiego dnia obrad ósmej edycji Europejskiego Kongresu Gospodarczego (Katowice, 18–20 maja 2016 r.) była infrastruktura oraz innowacje w nowej perspektywie finansowej UE. Nasza gospodarka posiada już pewne doświadczenia z minionej perspektywy, ale czy wiemy ostatecznie, co zrobić, aby polityka inwestycyjna, standardy relacji inwestor – wykonawca – podwykonawca oraz, co najważniejsze, dobierane technologie pozwoliły na wymierny sukces inwestycji?
The following are examples of the use of steel in projects and the information about what we can gain if in the design phase, when a large part of the total project costs is defined, we take a wider look at what the modern market of steel products offers to us.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2016, 4; 56-58
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza stanu deformacji powłoki mostu gruntowo-stalowego w różnych stanach jego budowy
Deformation analysis of soil-steel bridge shell in various stages of its construction
Autorzy:
Bęben, D.
Mańko, Z.
Powiązania:
https://bibliotekanauki.pl/articles/170642.pdf
Data publikacji:
2011
Wydawca:
Poltegor-Instytut Instytut Górnictwa Odkrywkowego
Tematy:
most gruntowo-stalowy
powłoki mostu
FLAC
soil-steel bridge
bridge shell
Opis:
W artykule przedstawiono zastosowanie programu FLAC opartego na metodzie różnic skończonych (MRS) w celu określenia stanu deformacji (odkształceń i przemieszczeń) oraz zachowania się konstrukcji powłoki mostu gruntowo-stalowego podczas zasypywania jej warstwami gruntu oraz pod wpływem obciążeń statycznych. Scharakteryzowano także model obliczeniowy typu 2D dla konstrukcji powłoki z uwzględnieniem warstwy kontaktowej typu interface. Metoda analizy oparta na tym modelu może być z dużym powodzeniem stosowana do obliczeń inżynierskich tego typu specyficznych zespolonych układów konstrukcyjnych (grunt + stal), gdyż uzyskano stosunkowo dużą zgodność wyników otrzymanych z obliczeń i pomiarów na obiekcie.
The paper is presented the application of the FLAC program based on finite differences methods (FDM) to determine the deformation state (strains and displacements) and behaviour of soil-steel bridge shell structure during its backfilling as well as during the static field loads tests. The assumptions of computational 2D model of shell structure with interface layer are also described. The analysis method based on this computational model may be used with a large success to design calculations of this specific type of structures (soil + steel), because the high convergence of calculation and measurement results were obtained.
Źródło:
Górnictwo Odkrywkowe; 2011, 52, 1-2; 163-171
0043-2075
Pojawia się w:
Górnictwo Odkrywkowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przydatność metody emisji akustycznej w ocenie stanu mostów kolejowych o konstrukcji stalowej – wyniki zastosowania i propozycje rozwoju
Usefulness of the acoustic emission method in the assessment of steel railway bridges - the results and development proposals
Autorzy:
Nowak, M.
Gawlik, J.
Schmidt, J.
Powiązania:
https://bibliotekanauki.pl/articles/248898.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
emisja akustyczna
stalowe mosty kolejowe
acoustic emission
railway steel bridge
Opis:
W artykule przedstawiono wyniki prac przeprowadzonych dla sprawdzenia możliwości i opracowania skutecznego sposobu ujawniania, lokalizacji i oceny uszkodzeń korozyjnych metodą emisji akustycznej (AE) na stalowych konstrukcjach mostowych. Przedstawiono również przykłady i ocenę możliwości zastosowania metody AE do identyfikacji uszkodzenia typu pęknięcie bezpośrednio na elementach mostów stalowych. W artykule zawarto także propozycję dalszego rozwoju zastosowania metody AE mającego na celu określanie poziomu obciążenia granicznego bezpiecznej eksploatacji mostu i kontrolowanego czasowego użytkowania obiektu z występującym uszkodzeniem.
The results of works for elaboration an efficient way to reveal, locate and estimate corrosion damages using acoustic emission (AE) method at steel bridge constructions have been presented in the paper. The examples and assessment of AE method application to identification damages like cracks directly on steel bridges elements have been also presented. The proposals for AE method application development to define the level of admissible load in bridge safety exploitation and time controlled usage of the object with an emerging damage have been given.
Źródło:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne; 2011, 96, z. 158; 353-366
1231-9171
Pojawia się w:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A framework for corrosion assessment in metallic structures, from data analysis to risk based inspection
Autorzy:
Cui, Xiaofei
Liang, Xiaoxia
Bharadwaj, Ujjwal
Powiązania:
https://bibliotekanauki.pl/articles/1841787.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
corrosion estimation
steel bridge
metallic structures
risk based inspection
software
Opis:
Metallic corrosion is a big challenge affecting many sectors in a nation’s economy. Necessary corrosion prevention actions have to be taken in order to maintain the integrity of engineering assets susceptible to corrosion. This paper proposes a holistic framework to support the management of corrosion in metallic structures. It is a fully automation corrosion assessment process, with risk updated by Bayesian theory. Through analyzing the thickness data measured by non-destructive testing (NDT) techniques, the influence of corrosion on the component can be estimated using statistical methods, which will enable users to make decisions on maintenance based on quantitative information. A case study using corrosion data from a steel bridge is included to demonstrate the proposed framework. It improved the conventional corrosion analysis method by the proposed statistical approach using representative thickness data, which aims to take full use of the remaining life. This model can be adapted to a wide range of metallic structure suffering from corrosion damage.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 1; 11-20
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza drgań własnych powłoki mostu gruntowo-stalowego przed zasypaniem jej gruntem
Natural vibrations analysis of soil-steel bridge shell before its backfilling
Autorzy:
Mańko, Z.
Bęben, D.
Powiązania:
https://bibliotekanauki.pl/articles/170661.pdf
Data publikacji:
2011
Wydawca:
Poltegor-Instytut Instytut Górnictwa Odkrywkowego
Tematy:
most gruntowo-stalowy
drgania własne
soil-steel bridge
natural vibrations
Opis:
W artykule przedstawiono analizę drgań własnych powłoki mostu gruntowo-stalowego wykonanej z blach falistych przed zasypaniem jej gruntem. Częstotliwości własne oraz odpowiadające im postacie drgań własnych są najistotniejszymi parametrami charakteryzującymi te konstrukcje podczas ich budowy, których istota polega na znacznym zróżnicowaniu właściwości wytrzymałościowych i sztywności poszczególnych elementów składowych, tj. stalowych blach falistych w stosunku do gruntu oraz w porównaniu do klasycznych mostów stalowych.
The paper is presented analysis of the natural vibration of soil-steel bridge shell made from corrugated plates before its backfilling. The natural frequencies and corresponding them the natural vibration forms are the most crucial factors characterizing these type of structures, which complication is depending on considerable differentiation of particular stiffnesses andproperties of its elements, e.g. corrugation steel plates in relation to soil as well as in comparison to the classical steel bridges.
Źródło:
Górnictwo Odkrywkowe; 2011, 52, 1-2; 156-162
0043-2075
Pojawia się w:
Górnictwo Odkrywkowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic measurements of Grot-Rowecki Bridge in Warsaw
Badania dynamiczne mostu Grota-Roweckiego w Warszawie
Autorzy:
Miller, B.
Piątkowski, G.
Ziaja, D.
Ziemiański, L.
Powiązania:
https://bibliotekanauki.pl/articles/951611.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
dynamika
analiza modalna
most stalowy
dynamics
modal analysis
steel bridge
Opis:
The paper precisely describes the measurement set-up, location of all measurement and excitation points used during the dynamic measurements of Grot-Rowecki Bridge in Warsaw, Poland. Measurement equipment as well as all the obtained results in a form of pairs of related eigenfrequencies and eigenforms are presented in this article.
W artykule precyzyjnie opisano sprzęt pomiarowy, lokalizację punktów wymuszenia i czujników przyspieszeń wykorzystanych w trakcie pomiarów dynamicznych mostu Grota- Roweckiego w Warszawie (Polska). Zaprezentowane zostały także rezultaty przeprowadzonych badań w postaci form drgań swobodnych i odpowiadających im częstotliwości.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 1; 505-515
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The historic steel bridge in Stany. Heritage preservation. Changing the function
Zabytkowy most stalowy w Stanach. Ochrona dziedzictwa. Zmiana funkcji
Autorzy:
Michalak, B.
Eckert, W.
Powiązania:
https://bibliotekanauki.pl/articles/396220.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
Beuchelt
steel bridge
steel lattice
Stany
Odra river
most stalowy
kratownica stalowa
Odra
Opis:
Stany is a small village located near the town of Nowa Sól in the Lubusz Voivodship. Within a few hundred meters of the buildings there is one of the most interesting monuments in the Lubusz Voivodship - a railway bridge dating back to the beginning of the 20th century. It was designed by the company BEUCHELT & Co. The bridge consists of fourteen spans with a total length of 642 m. It was in continuous operation until 1994. Since then the object has not been used and its technical condition is deteriorating year by year. The bridge is unique in Poland and in Europe, which means that it could be interesting to carefully describe it and investigate its structure. There are plans to repair its structure in the following year. The bridge will not be used in its previous function, but it will be renovated and adapted for cyclists.
Stany to mała wieś położona w pobliżu miasta Nowa Sól w województwie lubuskim. W odległości kilkuset metrów od budynków znajduje się jedna z najciekawszych atrakcji województwa lubuskiego - pochodzący z początku XX wieku most kolejowy. Jest to nitowana, stalowa konstrukcja kratownicowa z pasami równoległymi. Projekt został wykonany przez firmę Fabrik und für Brückenbau Eisenkonstruktionen BEUCHELT & Co. Grünberg in Schlesien (dzisiaj ZASTAL). Most składa się z czternastu przęseł o łącznej długości 642 m. Najdłuższe przęsło nurtowe ma rozpiętość 100,01 m. Długość przęsła nurtowego kwalifikuje most w Stanach w krajowej czołówce i daje mu drugie miejsce w Polsce i pierwsze w województwie lubuskim. Most był użytkowany nieprzerwanie do 1994 r. Od tego momentu obiekt jest nieczynny, a jego stan techniczny z roku na rok się pogarsza. Most jest wyjątkowy zarówno w skali kraju jak i Europy, co zachęca do dokładnego opisania i zbadania jego konstrukcji. Planowany jest jego remont i adaptacja do nowych celów. Most nie będzie wykorzystywany zgodnie z poprzednią funkcją, ale zostanie dostosowany do potrzeb planowanej w miejsce dawnej linii kolejowej ścieżki rowerowej.
Źródło:
Civil and Environmental Engineering Reports; 2018, No. 28(2); 111-123
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stary most drogowy przez Wartę w Świerkocinie (1929–1945)
Old road bridge over the Warta River in Świerkocin (1929–1945)
Autorzy:
Rabiega, Józef
Powiązania:
https://bibliotekanauki.pl/articles/2057775.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
most drogowy
most stalowy
most łukowy ze ściągiem
road bridge
steel bridge
arch bridge with tie
Opis:
Most przez Wartę w Świerkocinie (niem. Fichtwerder) oddano do użytkowania w 1929 r. Był on wówczas jednym z najdłuższych mostów drogowych Rzeszy Niemieckiej. Część nurtową mostu wykonano ze stali jako ciągłą konstrukcję z przęsłem środkowym o rozpiętości 90 m. W części zalewowej konstrukcja przęseł została wykonana jako żelbetowa o ustroju nośnym płytowo-belkowym. Część nurtowa mostu uległa zniszczeniu w 1945 roku, a na jej miejscu w roku 1964 wybudowano istniejący do dzisiaj most.
The Warta Bridge in Świerkocin (ger. Fichtwerder) was put into operation in 1929. At the time it was one of the longest bridges in German Reich. The stream bridge was built as a continuous steel structure with the main span of 90 m. Over the floodplain the bridge was constructed as a reinforced plate and beam concrete bridge. The stream bridge was destroyed in 1945 and it was later replaced with the current bridge in 1964.
Źródło:
Drogownictwo; 2021, 6; 179--188, III okł.
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wpływu położenia otworów montażowych na prędkość propagacji pęknięć zmęczeniowych w dźwigarach mostów stalowych
An influence analysis of the mounting holes localization on the propagation rate of fatigue cracks in steel bridge girders
Autorzy:
Duchaczek, A.
Mańko, Z.
Powiązania:
https://bibliotekanauki.pl/articles/169775.pdf
Data publikacji:
2014
Wydawca:
Poltegor-Instytut Instytut Górnictwa Odkrywkowego
Tematy:
dźwigar
most stalowy
pęknięcia zmęczeniowe
naprężenia
girder
steel bridge
fatique crack
stress
Opis:
W artykule dokonano oceny wpływu lokalizacji otworów montażowych wykonywanych w stalowych dźwigarach głównych mostów niskowodnych, na ich trwałość zmęczeniową poprzez analizę wartości współczynnika intensywności naprężeń K. Przedmiotem analiz był stalowy dwuteownik o wysokości 400 mm i długości całkowitej 5,60 m, dla którego wykonano model środnika umożliwiający prowadzenie obliczeń numerycznych z zastosowaniem oprogramowania FRANC2D.
This paper is presented an influence analysis of the mounting holes localization made in the steel girders of low-water bridges on their fatigue life by analyzing the stress intensity factor K. The subject of the analysis was the steel I-beam with a height of 400 mm and an overall length of 5.60 m. The computational model of the web was enabled an implementation of numerical calculations by using the software FRANC2D.
Źródło:
Górnictwo Odkrywkowe; 2014, 55, 4-5; 160-166
0043-2075
Pojawia się w:
Górnictwo Odkrywkowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Remont zabytkowego mostu Tumskiego we Wrocławiu
Renovation of historical Tumski bridge in Wrocław
Autorzy:
Rabiega, Józef
Olczyk, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2057801.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
remont
most drogowy
most stalowy
most zabytkowy
kłódki miłości
bridge renovation
road bridge
steel bridge
historical bridge
love padlocks
Opis:
Zabytkowy most Tumski we Wrocławiu (w swojej obecnej stalowej wersji) został oddany do użytkowania w 1889 roku i stanowi przeprawę pomiędzy Ostrowem Tumskim i Wyspą Piasek. Wykonany ostatnio remont przeprawy (lata 2019–2020) obejmował m.in. naprawę podpór, zabezpieczenie antykorozyjne konstrukcji stalowej, wymianę nawierzchni jezdni oraz chodników i wymagał demontażu wszystkich zawieszonych na moście "kłódek miłości" – ich łączna masa wynosiła 17 ton, znacznie więcej niż szacowano.
The historical Tumski bridge in Wrocław (in its current steel form) was opened in 1889 and it connects Ostrów Tumski and Wyspa Piasek. The recently completed renovation of the bridge (2019–2020) included repair of supports, corrosion protection of the steel structure, replacement of road pavement and sidewalks, and required removal of the "love padlocks" hanging on the bridge – their total weight was 17 tons, several times more than estimated.
Źródło:
Drogownictwo; 2021, 2; 49--52
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computational fatigue durability of butt welds with cracks in the flanges of the solid-web girder of the railway bridge
Obliczeniowa trwałość zmęczeniowa spoin czołowych z pęknięciami w pasach blachownicowego dźwigara mostu kolejowego
Autorzy:
Wichtowski, Bernard
Powiązania:
https://bibliotekanauki.pl/articles/115039.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
most kolejowy
most stalowy
złącze spawane
wytrzymałość zmęczeniowa
railway bridge
steel bridge
fusion-welded joint
fatigue strength
Opis:
In 2018, passed the 40th anniversary of the death of prof. Andrzej Fabiszewski (1924-1978), a forerunner of testing the quality of butt welds in exploited railway bridges. One of the first surveyed facilities was the viaduct on the Poznań-Szczecin line discussed in the article. A very bad state of welds was found and there were 61 internal cracks. In order to estimate the durability of the facility, strength tests of the steel of the structure were carried out and static calculations were made against standard and operational loads. The fatigue life of a crack in a flange joint of one girder was also analyzed. The results of these tests are included in the article.
W roku 2018 minęła 40 rocznica śmierci prof. Andrzeja Fabiszewskiego (1924- 1978), prekursora prowadzenia badań jakości spoin czołowych w eksploatowanych mostach kolejowych. Jednym z pierwszych badanych obiektów był wiadukt na linii Poznań-Szczecin omówiony w artykule. Stwierdzono bardzo zły stan spoin i występowanie w nich 61 pęknięć wewnętrznych. Celem oszacowania trwałości obiektu przeprowadzono badania wytrzymałościowe stali konstrukcji oraz wykonano obliczenia statyczne od obciążeń normowych i eksploatacyjnych. Przeanalizowano również trwałość zmęczeniową pęknięcia w spoinie pasowej jednego dźwigara. Wyniki tych badań zamieszczono w artykule.
Źródło:
Welding Technology Review; 2019, 91, 5; 27-32
0033-2364
2449-7959
Pojawia się w:
Welding Technology Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena możliwości eksploatacyjnych mostu drogowego po czterdziestu latach użytkowania
Assessment of operational capacity of a road bridge after forty year operation
Autorzy:
Furtak, K.
Powiązania:
https://bibliotekanauki.pl/articles/383760.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
most stalowy
stan techniczny
nośność
eksploatacja mostu
korozja
steel bridge
technical condition
load capacity
bridge operation
corrosion
Opis:
Artykuł dotyczy stalowego mostu drogowego pięcioprzęsłowego, o sumarycznej długości przęseł 288 m, który po ponad 40 latach eksploatacji znalazł się w złym stanie technicznym. Cechą charakterystyczną tego obiektu jest nietypowa konstrukcja przęseł. Dzięki temu można było - oprócz wniosków szczegółowych dotyczących analizowanego obiektu - podać wnioski ogólne dotyczące wpływu rozwiązań konstrukcyjnych elementów na ich stan techniczny i jednocześnie trwałość całego obiektu. W pracy przedstawiono wyniki przeprowadzonej analizy w zakresie stanu technicznego obiektu oraz jego nośności. Zwrócono uwagę na współzależność rozwiązań konstrukcyjnych i stanu technicznego. Podano także propozycje zakresu remontowych oraz zmian konstrukcyjnych, które wyeliminują zagrożenia konstrukcyjne. Stan techniczny obiektu jest bardzo zróżnicowany; od dobrego do złego. Szczególnie zły jest stan techniczny wsporników podchodnikowych. Wynika to z ich rozwiązania konstrukcyjnego. Są one powodem przecieków wody przez przerwy dylatacyjne między płytami i korozji powłoki stalowej. Na podstawie otrzymanych wyników obliczeń można stwierdzić, że po wykonaniu prac remontowych na obiekcie będzie mógł być dopuszczony bez ograniczeń ruch pojazdów trójosiowych o masie całkowitej do 30 ton oraz ruch pojazdów pięcioosiowych o masie całkowitej do 42 ton.
The article concerns a road five span steel bridge of total length of spans of 288 m, whose technical condition deteriorated after forty-year functioning. The bridge is characterised by an uncommon span design, owing to which it was possible to – apart from specific conclusions concerning the bridge – formulate general conclusions related to the impact of the structural solutions of the components on their technical condition and the serviceability of the whole object. The paper presents the results of an analysis of the technical condition of the bridge and its load carrying capacity. Particular attention was paid to the interrelationship between structural solutions and technical condition. The scope of repairs was suggested together with structural modifications that will eliminate structural hazards. The technical condition of the bridge varies from good to poor. The condition of the supports under the sidewalk is especially bad, which results from the design solution. They cause water seepage through the expansion joints and corrosion of the steel coating. On the basis of calculation results it can be stated that after the repair works of the bridge have been completed traffic of three-axle vehicles of total mass up to 30 ton and five-axle vehicles of total mass of up to 42 ton can be allowed with no restrictions.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 24; 89-99
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
XIX Europejska Wyprawa Mostowa. Węgry, Bośnia i Hercegowina, Czarnogóra I
19th European Bridge Trip. Hungary, Bosnia & Herzegovina, Montenegro, part 1
Autorzy:
Flaga, K.
Powiązania:
https://bibliotekanauki.pl/articles/364704.pdf
Data publikacji:
2013
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
żelbetowy most łukowy
most stalowy
kładka podwieszona
most kamienny
reinforced concrete arch bridge
steel bridge
footbridge suspended
stone bridge
Opis:
W dniach od 6 do 20 lipca 2013 r. Katedra Budowy Mostów i Tuneli Politechniki Krakowskiej, przy współpracy Biura Turystycznego Anitour z Czechowic-Dziedzic, zorganizowała XIX Europejską Wyprawę Mostową Bałkany – Karpaty 2013. Trasa wyprawy przebiegała aż przez 11 krajów europejskich (łącznie z Polską przez 12), tj.: Słowację, Węgry, Chorwację, Bośnię i Hercegowinę, Serbię, Czarnogórę, Albanię, Macedonię, Bułgarię, Rumunię, Ukrainę; powrót przez Słowację, i liczyła łącznie 5155 km. Pomijając jednodniowy odpoczynek w Ulcinj (Czarnogóra), przemierzaliśmy średnio dziennie po 370 km i byliśmy w autokarze średnio po 13 godzin dziennie (od 8.30 do 21.30). Była to zatem duża dawka tzw. turystyki kwalifikowanej.
Between 6th and 20th July 2013 the Chair of Bridge and Tunnel Construction of the Tadeusz Kościuszko Cracow University of Technology organised the 19th European Bridge Trip Balkans - Carpathia 2013. The route of the trip included 11 European countries and covered a total of 5.155 km.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2013, 6; 70-79
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Otwarcie części drogowej mostu Marii Skłodowskiej-Curie (d. Północnego)
Opening of road part of Maria Skłodowska-Curie bridge
Autorzy:
Niemierko, A.
Powiązania:
https://bibliotekanauki.pl/articles/144888.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
budowa mostu stalowego
historia mostów warszawskich
ceremonia otwarcia
steel bridge construction
history of Warsaw bridges
bridge opening ceremony
Opis:
Przedstawiono ceremonię otwarcia 10 mostu warszawskiego przez Wisłę na północy miasta. Opisano także w skrócie historię budowy mostu oraz szczegóły konstrukcji. Artykuł zawiera również tablicę z podstawowymi danymi wszystkich mostów Warszawy przez Wisłę.
Opening ceremony of 10th Warsaw bridge crossing Vistula River on north of the city was presented. History of bridge erection as well as some details of the structure were described. Paper contains the table listing principal data of all Warsaw bridges over Vistula River.
Źródło:
Drogownictwo; 2012, 7-8; 271-274
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emisja akustyczna w zastosowaniu do badania stalowego mostu kolejowego z uszkodzeniami
The test of railway steel bridge with defects using acoustic emission method
Autorzy:
Nowak, M.
Lyasota, I.
Powiązania:
https://bibliotekanauki.pl/articles/249303.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
emisja akustyczna
stalowe mosty kolejowe
degradacja materiału
railway steel bridge
acoustic emission
materials degradation
Opis:
Konstrukcje mostowe eksploatowane są w warunkach działania zmiennego środowiska atmosferycznego, co powoduje stałą degradację materiałów wykorzystanych do ich budowy. Istotne niebezpieczeństwo awarii w eksploatacji konstrukcji mostowych powoduje potrzebę usystematyzowania i rozszerzania stosowanych procedur oceny związanych z postępem owoczesnych metod badawczych. Dla wdrożenia nowego skutecznego sposobu opartego o system procedur wykorzystujących metodę emisji akustycznej (acousticemission - AE), a opracowanych dla monitorowania i określenia bezpiecznych warunków eksploatacji nośnych elementów mostów z uszkodzeniem, zorganizowane zostało konsorcjum złożone z Politechniki Krakowskiej oraz właściciela linii i mostów kolejowych, przedsiębiorstwo PKP Polskie Linie Kolejowe S.A. Konsorcjum to realizuje wspólnie projekt w ramach Programu Badań Stosowanych finansowany przez Narodowe Centrum Badań i Rozwoju. Jednym z etapów realizacji projektu były badania na konstrukcji mostowej z uszkodzeniem o różnej wielkości ubytku materiału. Dla przedmiotowej konstrukcji kratownicowej wykonano obliczenia numeryczne oraz szereg pomiarów z rejestracją sygnałów emisji akustycznej. Badania wykonano przy kontrolowanym ruchu zestawów kolejowych o różnym obciążeniu i różnej prędkości przejazdu zestawu kolejowego. Wyniki obliczeń, analiz, korelacji sygnałów AE i obciążenia, a także badań laboratoryjnych niezbędnych dla przeprowadzonych analiz zostały przedstawione w artykule.
Currently a significant part of operated railway steel bridges in Poland is exploited from the beginning of 20th century. The technical condition of them is very often bad and these objects require the appropriate diagnostics. Mostly the visual diagnostics is used, and in exceptional cases in some places of objects the other non-destructive testing are performed. Therefore the opinion about condition of bridge is non completed and it is necessary to study the effective method, which will enable to more exact diagnostics of steel bridges. The Cracow University of Technology together with PKP PLK realize the project to the work out of diagnostic method for steel railway bridges with use of acoustic emission method (AE). During project realization, the laboratory tests on material from railway steel bridge for collection data were performed. These measurements were done on standard specimens and on samples with corrosion products. The AE measurements on real object with different crack size were also performed. The tests were carried out at a controlled moving train at different speeds and for various weight of railway carriages. The results of acoustic emission tests and analysis with standard and additional parameters have been presented in the paper. The results of metallography and numerical analysis of bridge and defected element have also been presented.
Źródło:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne; 2016, 2(109); 115-124
1231-9171
Pojawia się w:
Zeszyty Naukowo-Techniczne Stowarzyszenia Inżynierów i Techników Komunikacji w Krakowie. Seria: Materiały Konferencyjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Współczesne technologie budowy mostów
Contemporary bridge construction technologies
Autorzy:
Biliszczuk, J.
Powiązania:
https://bibliotekanauki.pl/articles/363878.pdf
Data publikacji:
2015
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
Wrocławskie Dni Mostowe
seminarium
relacja
most podwieszony
most stalowy
most betonowy
WrocŁaw Bridge Days
seminar
report
suspension bridge
steel bridge
concrete bridge
Opis:
X jubileuszowe seminarium Wrocławskie Dni Mostowe odbyło się w Centrum Kongresowym Politechniki Wrocławskiej 27–28 listopada 2014 r. Tematyka dotyczyła współczesnych technologii budowy mostów i taki też był tytuł tej edycji WDM. W przeddzień seminarium (26 listopada 2014 r.) zorganizowano warsztaty Projektowanie rusztowań i urządzeń technologicznych, na których wygłoszono osiem półgodzinnych wykładów.
The tenth Wroclaw Bridge Days were held on 27-28 November 2014 at the Wroclaw University of Technology Congress Centre. The topic was bridge construction technologies. The day before the seminar day (26 November 2014) the workshop "Scaffolding and process device designing" with eight half-hour lectures was held.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2015, 2; 64-67
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fotogrametryczny pomiar odkształceń termicznych mostów stalowych
Photogrammetric measurements of thermal deformations of steel bridges
Autorzy:
Buczek, W.
Orłowski, P.
Preuss, R.
Sobala, D.
Zobel, H.
Powiązania:
https://bibliotekanauki.pl/articles/130786.pdf
Data publikacji:
2001
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
most stalowy
odkształcenie termiczne
pomiar odkształceń
pomiar fotogrametryczny
wiadukt kolejowy
steel bridge
thermal deformation
deformation measurement
photogrammetric measurement
railway bridge
Opis:
Interest in natural thermal phenomena, which occur in bridges, has been lasting from the thirties. However, field measurements of real objects have been performed very seldom. Therefore experimental verification of theoretical works becomes very important. An attempt concerning such investigations was performed within the Research Project KBN (the Committee of Scientific Research) no 7 T07E 012 15 "Development of methodology of determination of thermal deformations of steel bridges" at the Institute of Road and Bridges of the Warsaw University of Technology. Analysis of climatic conditions in Poland allowed to select a region characterised by the extreme distribution of annual and daily temperatures. Such requirements were met by the area of the city of Przemyśl. Two bridges were selected for measurements and tests within this area: one plate girder road object with an integrated pier of 152.9 m expansion, and the second object, a railway flyover with an ortotropowym channel cut-walk of 20 m expansion. Measurements of temperatures and spatial deformations, made by means of electronic meters, with the use of a photogrammetric method, were performed in January and July of 1999 and 2000. A concept of differential measurements was assumed as an initial method for designing photogrammetric measurements. For that purpose photographs were taken from stable positions, with repeatable external orientation photogrammetric cameras. Due to considerable time intervals of successive registration, this condition was approximately met in practice. This allowed to perform observations according to the temporary stereogramme mode, for which only changes of external orientation of photographs, resulting from the method of restoration of positions and utilisation of the (JMK-IO low stability camera, were determined. Observations were performed by means of an analytical stereo-plotter. with the use of a specialised procedure of measurements performed according to the mode of temporary stereogrammes. Each of measured objects was registered by means of a net of coherent photographs, in order to allow equal determination of co-ordinates of investigated points. In practice, photogrammetric models, which describe particular geometric features of investigated bridges, were reconstructed with the accuracy of mx = my = mz = +/-2mm Values of deformations, determined by means of the photogrammetric method (with an exception of the component perpendicular to the axis of the investigated bridge) have met expectations of "road experts".
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2001, 11; 3-7-3-18
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametry wytrzymałościowe i mikrostrukturalne stali mostowej z końca XIX wieku
Strength and microstructural parameters of late 19th-century bridge steel
Autorzy:
Kossakowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/163483.pdf
Data publikacji:
2013
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja stalowa
most stalowy
wiek XIX
wytrzymałość na rozciąganie
mikrostruktura
steel structure
steel bridge
XIX century
tensile strength
microstructure
Opis:
Procesy degradacyjne, jakie zachodzą w strukturze stali konstrukcyjnych poddanych wieloletniej eksploatacji, powodują redukcję ich parametrów wytrzymałościowych. Z uwagi na fakt, że w naszym kraju wciąż funkcjonują obiekty konstrukcyjne o wieku przekraczającym sto lat, konieczna jest okresowa weryfikacja ich nośności oraz sprawdzanie bezpieczeństwa użytkowania zgodnie z aktualnie obowiązującymi normatywami. W artykule przedstawiono wyniki badań wytrzymałości oraz parametrów mikrostrukturalnych stali mostowej, która została pobrana z mostu kolejowego, wybudowanego na terenie naszego kraju pod koniec XIX wieku. Prezentowane w pracy rezultaty mogą znaleźć zastosowanie w analizach nośności konstrukcji wykonanych ze stali o podobnym wieku i właściwościach.
In the case of structural steel that has been in use for many years, processes of degradation taking place within its structure cause a reduction in its strength parameters. Since there are buildings and structures in Poland which have been in use for more than one hundred years, it is necessary to carry out periodic verification of their load-bearing ability and the safety of their use in accordance with current standards and regulations. This article describes the results of tests of the strength and microstructural parameters of bridge steel taken from a Polish railway bridge built in the late 19th century. The results presented may be suitable for application in analyses of the load-bearing capacity of structures made from steel of similar age and characteristics.
Źródło:
Przegląd Budowlany; 2013, R. 84, nr 4, 4; 14-18
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rola zasypki w gruntowo-powłokowych obiektach mostowych
The role of backfill in the soil-steel bridge structures
Autorzy:
Bęben, D.
Ocik, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/143793.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
most gruntowo-powłokowy
zasypka
badania doświadczalne
modelowanie numeryczne
soil-steel bridge
backfill
experimental tests
numerical modeling
Opis:
Przedstawiono analizę numeryczną wpływu jakości zasypki na deformacje mostowych obiektów gruntowo-powłokowych. Obliczenia statyczne przeprowadzone programem Abaqus dotyczyły obciążeń mostu gruntowo-powłokowego o rozpiętości 12,315 m i wysokości powłoki 3,555 m, a naziom nad kluczem powłoki wynosił 1,0 m. Powłokę stalową wykonano z arkuszy blach falistych SC 380×140×7,1 mm. Celem pracy było przedstawienie wpływu jakości zasypki (kąta tarcia wewnętrznego, ciężaru objętościowego, modułu Younga) na wytężenie powłoki stalowej. Obliczenia dotyczyły rzeczywistego mostu, który wcześniej wszechstronnie przebadano doświadczalnie. Uzyskane wyniki obliczeń porównano z rezultatami doświadczeń. Dokonano oceny wpływu jakości zasypki na wytężenie powłoki stalowej. Podano, które parametry mają największe znaczenie na wytężenie powłoki oraz powody różnic w wynikach obliczeń i doświadczeń.
A numerical analysis of the impact of backfill quality on the deformation of soil-steel bridge structures was presented. Calculations using Abaqus program were performed for the soil-steel bridge with a span of 12.315 m and height of shell of 3.555 m under static live loads . Soil cover over the shell crown was equal to 1.0 m. The steel shell was assembled from the sheets of SC 380×140×7.1 mm. The main aim was to present the impact of backfill quality (of internal friction angle, of unit weight, of Young’s modulus) on the effort of steel shell. Calculations were performed for the actual bridge structure, previously extensively experimentally studied. The obtained results were compared with those of experiments. Final conclusions relate mainly to evaluation of the impact of backfill quality on the effort of steel shell giving parameters that are of utmost importance. Reasons of differences between calculated and experimental results were given.
Źródło:
Drogownictwo; 2016, 1; 15-21
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odbudowa mostu Łazienkowskiego po pożarze
Łazienkowski Bridge reconstruction after the fire
Autorzy:
Niemierko, A.
Powiązania:
https://bibliotekanauki.pl/articles/144735.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
odbudowa mostu stalowego
pożar mostu
nasuwanie przęseł
płyta ortotropowa pomostu
steel bridge reconstruction
bridge fire
incremental launching
orthotropic plate deck
Opis:
Stwierdzone po pożarze uszkodzenia konstrukcji połowy 41-letniego mostu stalowego z ortotropową płytą pomostu wymusiły decyzję o jego wymianie. Ze względu na znaczenie mostu w komunikacji miejskiej Warszawy przyjęto bardzo krótki czas realizacji - 7 miesięcy. W celu dotrzymania tego terminu przyjęto oryginalną koncepcję wymiany konstrukcji. Rozbiórka segmentów starego mostu w przęśle środkowym odbywa się jednocześnie z obustronnym nasuwaniem nowych przęseł. Nowe przęsła są montowane na opuszczonych na podpory tymczasowe przęsłach skrajnych.
Structural damages revealed after the fire of a half of 41-years old steel bridge with orthotropic deck has forced the decision of its replacement. Works should be finished during 7 month only because of importance of this crossing for Warsaw city public transport. Therefore a very original method of replacement was accepted. Old structure in the middle span being cut on segments and at the same time new structure being incrementally launched from both sides. New spans are assembled on the deck of lowered side spans on temporary supports.
Źródło:
Drogownictwo; 2015, 8; 273-275
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristic Features of Hybrid Bridge Structure Models
Autorzy:
Machelski, Czesław
Powiązania:
https://bibliotekanauki.pl/articles/1838084.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
soil-steel bridge
models of hybrid structures
contact forces
investigation
most gruntowo-stalowy
konstrukcje hybrydowe
modele konstrukcji mostowych
Opis:
This work discusses the classification of bridge structures and their models. Examples of hybrid models are also indicated in the case of homogeneous and mixed structures. Where hybrid design and model cases are presented, an algorithm for the analysis of contact interactions between subsystems is provided. The soil and shell structure is adopted as an example of analyses, where in its characteristic feature, differentiating it from classic bridges, is the large influence of both the soil backfill and the road surface as load-bearing elements of the structure. There are two structural subsystems present in the model of the soil-shell structure: a corrugated sheet coating and a soil backfill with a surface. The interaction between them is modeled as a contact interaction, i.e. forces with a direction normal and tangent to the line of the circumferential band of the shell. The paper presents an algorithm of their analysis, resulting from the outcomes of tests with the use of strain gauges, with the load being a vehicle changing its position. The advantage of the algorithm is that it takes into account the actual physical properties of the soil in the backfill layers and the contact layer of the coating with the soil. Direct contact force measurements along the entire length of the circumferential strip are very difficult. In practice, pressure gauges are used to determine normal interactions.
Źródło:
Civil and Environmental Engineering Reports; 2021, 31, 1; 44-53
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification and Analysis of Noise Sources in a Plate Girder Railway Bridge with Orthotropic Deck
Identyfikacja i analiza źródeł hałasu w kolejowym moście blachownicowym z pomostem ortotropowym
Autorzy:
Janas, Lucjan
Powiązania:
https://bibliotekanauki.pl/articles/1811794.pdf
Data publikacji:
2019
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
noise
vibrations
steel railway bridge
coherence
hałas
drgania
most stalowy kolejowy
koherencja
Opis:
The paper presents the results of a noise and vibration analysis of a steel railway plate girder bridge with an orthotropic deck and ballast. This kind of bridges may pose a threat to environment. In order to precisely determine the reasons for the increase in noise, in this article the acoustic phenomena surrounding the bridge were analyzed in detail. Sound characteristics were determined in three points – next to the railway line outside the bridge, next to, and under the bridge. The sound characteristics are presented in one-third octave bands and narrow frequency bands. The analysis was based on comparing the levels of acoustic pressure and determining the summary levels. The narrow frequency bands analysis included an identification of the frequency composition of the generated sounds. A significant increase in noise under the bridge was found. The sound pressure level next to the track, beyond the bridge in comparison to the background level increases in the entire analyzed range of the frequencies. The sound pressure level next to the bridge was only 0.6 dB higher than the noise next to the track, beyond the bridge. The sound pressure level under the bridge is much larger in the low frequency range (up to approx. 400 Hz) than the level next to the track, beyond the bridge. It can be noticed that in analysed case the total noise under the bridge was 7.2 dB higher than the noise next to the track, beyond the bridge. The highest sound level values are in the range of 50-125 Hz. This phenomenon was caused by vibrations of bridge structural elements. The passage of a train excited vibrations in large-surface elements - in this case orthotropic deck. The analysis in narrow frequency bands allowed to confirm the high compatibility of platform vibrations (deck) and sounds under the bridge. A small agreement or no agreement exists between vibrations of the girder and acoustic pressure under and next to the bridge. The analysed type of structure can be a nuisance to the environment if it is located on high supports in urbanized areas.
W artykule przedstawiono rezultaty analizy hałasu i drgań mostu stalowego blachownicowego, z pomostem ortotropowym i torem ułożonym na podsypce. Tego rodzaju obiekty mogą stanowić zagrożenie dla środowiska. W pierwszej kolejności szczegółowo przeanalizowano zjawiska akustyczne w otoczeniu mostu. Ciśnienie akustyczne mierzono w trzech punktach – obok linii kolejowej poza mostem, obok mostu i pod mostem. Charakterystyki dźwięku porównano w wąskich pasmach częstotliwości i w pasmach tercjowych. Określono również poziomy sumaryczne i stwierdzono znaczny wzrost hałasu pod obiektem. Poziom ciśnienia akustycznego obok toru poza mostem, w porównaniu do poziomu tła, wzrasta w całym analizowanym zakresie częstotliwości. Poziom ciśnienia akustycznego obok mostu jest porównywalny do poziomu obok toru poza mostem – różnica wynosi jedynie 0.6 dB. Sumaryczny hałas pod mostem był o 7,2 dB wyższy niż hałas przy torze, poza mostem. Poziom ciśnienia akustycznego był wyższy w zakresie niskich częstotliwości – do ok. 400 Hz. Najwyższe wartości poziomu dźwięku mieściły się w zakresie 50-125 Hz. Do identyfikacji źródeł dźwięku zastosowano metodę funkcji koherencji. Wykazano, że wzrost hałasu pod obiektem jest spowodowany wibracjami elementów konstrukcji. Przejazd pociągu wzbudzał drgania elementów wielkopowierzchniowych (w tym przypadku pomostu ortotropowego), które przyczyniły się do emisji hałasu. Analiza w wąskich pasmach częstotliwości pozwoliła na potwierdzenie koherencji drgań pomostu i dźwięków pod mostem. Nie stwierdzono występowania zgodności między charakterystyką drgań dźwigara blachownicowego i ciśnieniem akustycznym obok mostu. Przeprowadzone analizy pozwalają stwierdzić, że analizowany typ konstrukcji może być uciążliwy dla środowiska, szczególnie wtedy, gdy będzie zlokalizowany na obszarze zurbanizowanym, np. na wysokich podporach.
Źródło:
Rocznik Ochrona Środowiska; 2019, Tom 21, cz. 1; 600-610
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Most Lupu w Szanghaju – przykład nowoczesnego budownictwa mostowego
Lupu Bridge in Shanghai – an example of modern bridge engineering
Autorzy:
Bęben, D.
Anigacz, W.
Powiązania:
https://bibliotekanauki.pl/articles/143678.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
Most Lupu
stalowy most łukowy
konstrukcja wsporcza
budowa
Lupu bridge
steel arch bridge
supporting structure
construction
Opis:
Przedstawiono opis konstrukcji stalowego mostu łukowego w Szanghaju nad rzeką Huangpu. Jest to drugi pod względem rozpiętości przęsła stalowy most łukowy na świecie. Opisano sposób budowy oraz montażu łuku mostu i dźwigarów pomostu. Podano także sposób rozwiązania posadowienia z uwagi na trudne warunki gruntowe.
The paper presents a description of steel structure of arch bridge. over the Huangpu River in Shanghai. This bridge is the second longest span steel arch bridge in the world. Construction and assembly technology of arch and deck girders were described. Foundation concept considering difficult geotechnical conditions was also given.
Źródło:
Drogownictwo; 2014, 10; 344
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recent research on flexible culverts in sloping terrain
Autorzy:
Wadi, A.
Pettersson, L.
Powiązania:
https://bibliotekanauki.pl/articles/383757.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
sloping terrain
flexible culvert
soil-steel composite bridge
finite element method
snowshed
avalanche load
Opis:
The performance of buried flexible steel structures is directly influenced by the quality of the backfill soil and its configuration around the conduit. The economical choice of these structures stimulates practitioners to expand their different applications including their performance in sloping environment. The presence of steep surface slopes induces unbalanced loading and asymmetrical soil support around the conduit. This paper outlines the latest research efforts on how a flexible culvert would perform in sloping terrain environment. The paper focuses primarily on the structural behaviour of soil loading effects. The investigation highlights the use of numerical simulation in predicting the performance of a case study of flexible culvert under different construction schemes, where the influence of slope intensity and depth of soil cover are briefly presented. Soil slope stability as a major concern is also discussed. The research outcome clearly underlines the importance of soil configuration around steel culverts. The asymmetrical response of the conduit is predictably observed from the results and greatly influenced by the presence of shallow depth of soil covers. Sectional forces tend to increase with the increase of surface slopes. The results also underline the necessity of soil stability investigation when constructing flexible culverts in sloping terrain.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 23; 293-299
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vertical vibrations of composite bridge/track structure/high-speed train systems. Part 3: Deterministic and random vibrations of exemplary system
Autorzy:
Podworna, M.
Klasztorny, M.
Powiązania:
https://bibliotekanauki.pl/articles/201818.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite steel-concrete bridge
ballasted track structure
high-speed train
design
simulation
numerical analysis
Opis:
Based on the one-dimensional quasi-exact physical and mathematical modelling of a composite (steel-concrete) bridge/track structure/high-speed train system (BTT), developed in Part 2, advanced computer algorithms for the BTT numerical modelling and simulation as well as a computer programme to simulate vertical vibrations of BTT systems are developed. The exemplary bridge under numerical quasi-static and dynamic analysis, designed according to Polish standards, has a 15.00 m span length and belongs to the SCB series-of-types developed in Part 1. The bridge is loaded by a German ICE-3 high-speed train moving at the resonant and maximum operating speeds. A continuously welded ballasted track structure adapted to high operating velocities is applied. The output quantities include: time-histories of the vertical deflection of the main beams at the midspan, time-histories of the longitudinal normal stress in the bottom fibres of the main beams at the midspan, time-histories of the vertical acceleration of the bridge deck at the midspan, time-histories of the vertical accelerations of the suspension pivots in car-bodies, time-histories of the dynamic pressures of the wheel sets of moving rail-vehicles. The design quantities, understood as the extreme values of the output quantities, are used to verify the design conditions. The basic random factor, i.e. vertical track irregularities of the track, is taken into consideration. Basic statistics of the design quantities treated as random variables are calculated and taken into account in the design conditions.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 2; 305-320
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural design of flexible culverts development trends
Autorzy:
Pettersson, L.
Wadi, A.
Williams, K.
Powiązania:
https://bibliotekanauki.pl/articles/383669.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
flexible culvert
Soil-Steel Composite Bridge
Canadian Highway Bridge Design Code
TRVK Bro 11
Swedish Design Method
Opis:
Structural design requirements for flexible culverts are available in several international bridge design codes. Examples are the Canadian (CHBDC), the American (AASHTO) and the Swedish (TRVK Bro ll2). The designation “flexible culvert” may today be somewhat misleading. The word culvert is usually associated with small pipes in road embankments. However, over the years flexible culverts have grown bigger and a more proper designation would be bridges. Therefore, these structures are often also referred to as Soil-Steel Composite Bridges or just Soil-Steel Bridges. With this development also new and more stringent requirements on the structural design follows. In this paper key aspects of a holistic design approach based on the authors experience on the essentials of flexible culvert structural design3 are outlined and is compared to the current design approaches in the CHBDC and the TRVK Bro 11. However, this paper will provide insight into how the holistic design topics are addressed in current design codes and future research and development.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 23; 237-250
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena zużycia technicznego wybranego stalowego mostu kolejowego
Deterioration Assessment of a Selected Steel Railway Bridge
Autorzy:
Chmielewski, R.
Muzolf, P.
Sancewicz, S.
Powiązania:
https://bibliotekanauki.pl/articles/215512.pdf
Data publikacji:
2017
Wydawca:
Instytut Kolejnictwa
Tematy:
ocena zużycia technicznego
degradacja
stalowy most kolejowy
utrzymanie mostów
deterioration assessment
degradation
steel railway bridge
bridge maintenance
Opis:
W artykule przedstawiono ocenę stanu technicznego kolejowego stalowego obiektu mostowego. W tej ocenie dodatkowo uwzględniono również wpływ układu geometrycznego torów, w szczególności mimośrodowe położenie osi toru względem osi obiektu, na wytężenie przęseł oraz na zmniejszenie trwałości zmęczeniowej. Podkreślono, że wraz ze zmniejszeniem sztywności przęseł, ich skręcanie, a tym samym również siły boczne, ulegały zwiększeniu. Celowe byłoby wykorzystanie wniosków przedstawionych w niniejszym artykule, podczas przeglądów kolejowych obiektów mostowych, jako uzupełnienie procedury zawartej w Instrukcji Id-16.
The paper presents assessment methodology for steel railway bridge. Degradation of considered railway bridge due to the effect of track misalignment was taken into account. It should be noted that with the decrease of span stiff ness due to corrosion, the phenomenon of twisting occured, and therefore the lateral forces underwent increasing. It is recomended to use the findings presented in this paper to conduct inspections of railway bridges as a supplement to the procedures described in PKP PLK manual Id-16.
Źródło:
Problemy Kolejnictwa; 2017, 174; 7-18
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
XX Europejska Wyprawa Mostowa Gruzja – Armenia 2014, cz. 4
20th European Bridge Expedition Georgia -Armenia 2014. Part 4
Autorzy:
Flaga, K.
Powiązania:
https://bibliotekanauki.pl/articles/365296.pdf
Data publikacji:
2015
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
Wyprawa Mostowa
Gruzja
Armenia
most kamienny
stalowy most kolejowy
most łukowy
Bridge Expedition
Georgia
stone bridge
steel railway bridge
arch bridge
Opis:
W czwartej i ostatniej części relacji z XX Europejskiej Wyprawy Mostowej, zorganizowanej w 2014 r. przez mostowców z Politechniki Krakowskiej, poznajemy zabytki południowo-wschodniej i północnej Armenii, a także historyczne i współczesne obiekty mostowe tego regionu.
The fourth and last part of the report on the 20th European Bridge Expedition Georgia - Armenia organised in 2014 by bridge engineers from the Krakow University of Technology, presents heritage monuments of Southeastern and Northern Armenia, as well as historical and contemporary bridge structures of the region.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2015, 3; 114-122
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deformacje powłoki mostu wykonanej z blach falistych podczas zasypywania gruntem
Deformation of bridge shell made from corrugated plates during backfilling
Autorzy:
Bęben, D.
Powiązania:
https://bibliotekanauki.pl/articles/349085.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
most gruntowo-stalowy
blacha falista
analiza MRS
element interface
zasypywanie gruntem
soil-steel bridge
corrugated plate
FDM analysis
interface element
backfilling
Opis:
W referacie przedstawiono analizę numeryczną mostu wykonanego ze stalowych blach falistych podczas zasypywania jego konstrukcji gruntem. Otrzymane wyniki obliczeń porównano z rezultatami doświadczeń. Analizowany most ma przekrój skrzynkowy o rozpiętości przęsła 12,315 m i świetle pionowym 3,555 m. W pracy przedstawiono zastosowanie programu FLAC (Fast Lagrangian Analysis of Continua) opartego na metodzie różnic skończonych (MRS) do określenia zachowania się mostu gruntowo-stalowego podczas zasypywania i zagęszczania gruntu. Założenia do modelu obliczeniowego 2D mostu gruntowo-stalowego z elementami interface opisano także. Metoda oparta na modelu obliczeniowym może być użyta z dużym sukcesem do obliczeń projektowych tego specyficznego typu konstrukcji zamiast konwencjonalnych analitycznych mało dokładnych metod. Wnioski z przeprowadzonej analizy mogą być przydatne głównie do oceny zachowania się powłok tego typu mostów pod obciążeniem gruntem. W związku z coraz szerszym stosowaniem w Polsce i na świecie tego typu konstrukcji do budowy mostów drogowych i kolejowych o małych i średnich rozpiętościach teoretycznych, wnioski z przeprowadzonej analizy można uogólnić do całej klasy podobnych rozwiązań mostów gruntowo-stalowych.
This paper is presented the numerical analysis of corrugated steel plates (CSP) bridge during backfilling. Obtained calculations results were compared with the experimental ones. The analyzed bridge has a box structure and an effective span of 12.315 m as well as a clear height of 3.555 m. The paper is presented the application of the FLAC (Fast Lagrangian Analysis of Continua) program based on finite differences method (FDM) to determine behavior of the soil-steel bridge structure during backfilling. The assumptions of computational 2D model of soil-steel bridge structure with interface elements are also described. The method based on this computational model may be used with large success to design calculations of this specific type of structures instead of the conventional and little accurate analytical methods. The conclusions drawn from such analysis can be helpful mostly for the assessment of the behavior of the steel-soil bridge structures under load of backfilling. In consideration of an even more frequent application of this type of structure in for small and middle-sized road and railway bridges in Poland and in the world, conclusions of conducted analysis can be generalized to whole class of similar soil-steel bridge solutions.
Źródło:
Górnictwo i Geoinżynieria; 2010, 34, 2; 97-104
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aplication of guided wave propagation in diagnostics of steel bridge components
Autorzy:
Rucka, M.
Zima, B.
Kędra, R.
Powiązania:
https://bibliotekanauki.pl/articles/230884.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
badanie nieniszczące
wykrywanie uszkodzenia
ocena stanu
propagacja fali
fala kierowana
most stalowy
non-destructive testing
damage detection
condition assessment
wave propagation
guided wave
steel bridge
Opis:
Early detection of potential defects and identification of their location are necessary to ensure safe, reliable and long-term use of engineering structures. Non-destructive diagnostic tests based on guided wave propagation are becoming more popular because of the possibility to inspect large areas during a single measurement with a small number of sensors. The aim of this study is the application of guided wave propagation in non-destructive diagnostics of steel bridges. The paper contains results of numerical analyses for a typical railway bridge. The ability of damage detection using guided Lamb waves was demonstrated on the example of a part of a plate girder as well as a bolted connection. In addition, laboratory tests were performed to investigate the practical application of wave propagation for a steel plate and a prestressed bolted joint.
Źródło:
Archives of Civil Engineering; 2014, 60, 4; 493-515
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Steel soil composite bridge: an alternative design solution for short-span bridge towards sustainability
Autorzy:
Du, G.
Petersson, L.
Karoumi, R.
Powiązania:
https://bibliotekanauki.pl/articles/383565.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
concrete slab frame bridge
soil steel composite bridge
soil steel flexible culverts
LCA
C02 emission
sustainable construction
life cycle assessment (LCA)
global warming
climate change
Opis:
The construction sector is a major source of greenhouse gases. Under the increasing concern about climate change and growing construction activities, the whole sector is challenged to shift focus toward sustainable solutions. The traditional procurement often prioritizes technical and economic viability, while their environmental performance is overlooked. Today’s designers are urged to seek new design options to reduce environmental burdens. Sweden owns more than 24574 bridges, most of which are short spans. Among them, the slab frame bridge (CFB) is a common solution. Soil steel composite bridge (SSCB), alternatively, is a functional equivalent solution to CFB and shows advantages in low cost and easy construction. This paper compares the environmental performance between these two bridge types based on life cycle assessment (LCA). The analysis and its results show that the SSCB is preferable over CFB in most of the examined environmental indicators.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 23; 91-101
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vertical vibrations of composite bridge/track structure/high-speed train systems. Part 2: Physical and mathematical modelling
Autorzy:
Podworna, M.
Klasztorny, M.
Powiązania:
https://bibliotekanauki.pl/articles/200194.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite steel-concrete bridge
ballasted track structure
high-speed train
random track irregularities
FE modelling
equations of motion
Opis:
A theory of one-dimensional physical and mathematical modelling of the composite (steel-concrete) bridge/track structure/highspeed train system is developed including viscoelastic suspensions of rail-vehicles with two two-axle bogies each, non-linear Hertz contact stiffness and one-sided contact between wheel sets and rails, the viscoelastic and inertia features of the bridge, the viscoelastic track structure on and beyond the bridge, approach slabs, and random vertical track irregularities. Compared to the state-of-the-art, the physical model developed in the study accurately reproduces dynamic processes in the considered system. Division of the system into the natural subsystems, a method of formulation of the equations of motion partly in implicit form and the finite element method are applied. Vibrations in the vertical plane of symmetry are described by more than nine matrix equations of motion with constant coefficients. Couplings and non-linearity are hidden in the generalized load vectors. The equations of motion are integrated using the implicit Newmark average acceleration method with linear extrapolation of the interactions between the subsystems.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 1; 181-196
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vertical vibrations of composite bridge/track structure/high-speed train systems. Part 1: Series-of-types of steel-concrete bridges
Autorzy:
Podworna, M.
Klasztorny, M.
Powiązania:
https://bibliotekanauki.pl/articles/202151.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite steel-concrete bridge
ballasted track structure
high-speed train
design
FE modelling
simulation
forced resonances
numerical analysis
Opis:
A new series-of-types of single-span simply-supported railway composite (steel-concrete) bridges, with a symmetric platform, has been designed according to the Polish bridge standards. The designed bridges/viaducts are located on the main railways of the classification coefficient k = +2. A ballasted track structure adapted to high operating speeds has also been designed. The ultimate limit states and the limit states corresponding to the bridges undertaken are collected and discussed. The bridges have been designed in accordance with contemporary art engineering, with geometric and material optimization, avoiding overdesign. A new methodology of numerical modelling and simulation of dynamic processes in composite bridge/ballasted track structure/high speed train systems, developed in Part 2 and Part 3, has been applied and implemented in a problem-oriented computer programme. A new approach to predicting forced resonances in those systems is formulated and tested numerically. It has been proved that in the case of typical structural solutions of bridges and ballasted track structures, it is necessary to introduce certain limitations for operating speeds of trains.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 1; 165-179
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large-span soil steel composite bridges
Autorzy:
Wadi, A.
Pettersson, L.
Powiązania:
https://bibliotekanauki.pl/articles/384031.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
flexible culvert
soil-steel composite bridge
Swedish design method
long-span
ultimate field test
full-scale test
loading to failure
Opis:
Soil-steel composite bridges are considered competitive structures being an economical alternative to similar span concrete bridges. They are increasingly used for road and railway bridge construction. Spans have increased and structures with spans over 20 m have been built. The continuous development of infrastructure impels designers to push the limits of these structures for bigger spans with the lowest possible height of cover. Since the birth of the ring compression theory, different design methods have been developed to account for the various conditions and facilitate the use of bigger span structures. Yet, there is an urge to investigate whether the current design procedures are conservative or if they are reasonably accurate to predict the capacity of large-span structures. This paper presents the on-going project involving the capacity of large-span soil-steel composite bridges. The study investigates the use of finite element modelling in predicting the performance of a case study for an ultimate limit state field test. The project also highlights the need and intention to perform an ultimate limit state test for a large-span structure. The outcome of the project is to assess the current design procedures and to reflect recommendations on the design where seen applicable.
Źródło:
Archiwum Instytutu Inżynierii Lądowej; 2017, 23; 287-292
1897-4007
Pojawia się w:
Archiwum Instytutu Inżynierii Lądowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność na pękanie starej stali mostowej
Fracture toughness of old bridge steel
Autorzy:
Mytych-Kumańska, E
Kossakowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/970350.pdf
Data publikacji:
2013
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
odporność na pękanie
całka J
mosty
stara stal mostowa
bridges
old bridge steel
fracture toughness
J integral
Opis:
Tematyka artykułu jest związana z zagadnieniami odporności na pękanie starej stali mostowej, która została pobrana z mostu kolejowego o okresie eksploatacji przekraczającym 100 lat. Omówiono podstawowe zagadnienia mechaniki pękania, a także podano szczegółowe informacje na temat procedur wyznaczania odporności na pękanie, które są stosowane w badaniach stali mostowych. Omówiono wyniki przeprowadzonych badań, w których oszacowano wartość całki JQ, określając tym samym odporności na pękanie badanej stali.
The subject of paper is related to problems the of fracture toughness of old steel bridge which was taken from the railway bridge, that was loaded during more than 100 years. The basic problems of fracture mechanics, as well as detailed information on the procedures of determination of material fracture toughness, which were used in the steel bridge research, are presented. The results of the study, the critical values of JQ integral, defining the fracture toughness of investigated steel are discussed.
Źródło:
Budownictwo i Architektura; 2013, 12, 1; 251-258
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of classical land surveying measurement methods for determining the vertical displacement of railway bridges
Zastosowanie klasycznych metod geodezyjnych do wyznaczania przemieszczeń pionowych belek dźwigara mostu kolejowego
Autorzy:
Gawronek, P.
Makuch, M.
Powiązania:
https://bibliotekanauki.pl/articles/396112.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
determination of displacements
displacement of structure
deformation of structure
precise leveling
trigonometric leveling
steel railway bridge
wyznaczanie przemieszczeń
przemieszczenia obiektu
odkształcenia obiektu
niwelacja precyzyjna
niwelacja trygonometryczna
stalowy most kolejowy
metody geodezyjne
Opis:
The classical measurements of stability of railway bridge, in the context of determining the vertical displacements of the object, consisted on precise leveling of girders and trigonometric leveling of controlled points (fixed into girders' surface). The construction elements, which were measured in two ways, in real terms belonged to the same vertical planes. Altitude measurements of construction were carried out during periodic structural stability tests and during static load tests of bridge by train. The specificity of displacement measurements, the type of measured object and the rail land surveying measurement conditions were determinants to define methodology of altitude measurement. The article presents compatibility of vertical displacements of steel railway bridge, which were developed in two measurement methods. In conclusion, the authors proposed the optimum concept of determining the vertical displacements of girders by using precise and trigonometric leveling (in terms of accuracy, safety and economy of measurement).
Pomiary klasyczne stabilności mostu kolejowego, w kontekście wyznaczania przemieszczeń pionowych dolnych belek konstrukcyjnych obiektu, polegały na niwelacji precyzyjnej wpustów dźwigarów oraz niwelacji trygonometrycznej punktów kontrolowanych, zamocowanych do konstrukcji mostu w płaszczyznach pionowych niwelowanych wypustów. Pomiary wysokościowe metodami klasycznymi realizowano podczas okresowego badania stabilności konstrukcji oraz podczas próbnych obciążeń statycznych mostu taborem kolejowym. Specyfika pomiarów przemieszczeń, rodzaju obiektu podlegającego pomiarowi oraz warunków pracy w geodezji kolejowej zobligowała do zdefiniowania metodyk pomiarów wysokościowych, zapewniających pozyskanie danych o zadowalającym stopniu dokładności oraz niezawodności w kontekście badanego zjawiska. W artykule dokonano oceny stopnia zgodności wyznaczonych przemieszczeń pionowych pozyskanych na podstawie precyzyjnej niwelacji geometrycznej oraz niwelacji trygonometrycznej. W podsumowaniu zaproponowano optymalną pod względem dokładności, ekonomii pomiaru oraz bezpieczeństwa koncepcję wyznaczania przemieszczeń pionowych dolnych belek dźwigara mostu kolejowego z zastosowaniem metody klasycznej.
Źródło:
Civil and Environmental Engineering Reports; 2017, No. 27(4); 169-183
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Poszerzenia mostu im. gen. Stefana Grota-Roweckiego przez Wisłę w Warszawie
Widening of gen. Stefan Grot-Rowecki bridge over Vistula River in Warsaw
Autorzy:
Čáp, R.
Spryszak, P.
Szołucha, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/953666.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
mosty stalowe
poszerzanie mostów
wzmacnianie konstrukcji mostowych
steel bridges
bridge widening
bridge structure strengthening
Opis:
Poszerzenie mostu stalowego z 1981 r. było jedną z największych operacji tego typu w Europie i największą w historii polskiego mostownictwa. Zwiększono liczbę pasów ruchu z 8 do 10, oddzielając jednocześnie pasy drogi ekspresowej od pasów ruchu lokalnego. Zastępując stare wsporniki nowymi z dodatkowymi zastrzałami rurowymi oraz wzmacniając konstrukcję za pomocą sprężenia zewnętrznego dostosowano most do zwiększonych obciążeń normowych. Inwestycję realizowano bez przerywania ruchu na moście.
Widening of steel bridge constructed in 1981 was one of the most important operation of this kind in Europe and the biggest in the Polish bridge engineering history. The number of traffic lanes was increased from 8 to 10 separating at the same time expressway lanes from local road lanes. Replacing old cantilevers by new ones with additional tubular struts and reinforcing bridge structure by external cables the adaptation of structure to highest design loads was obtained. All works were done without interrupting the traffic.
Źródło:
Drogownictwo; 2016, 6; 190-193
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wymagania materiałowe dla stali zbrojeniowej według obowiązujących norm w kontekście projektowania mostów
Autorzy:
Piotrowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/364537.pdf
Data publikacji:
2018
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
budowa mostów
wytrzymałość
stal
bezpieczeństwo
konstrukcje stalowe
bridge construction
strength
steel
security
steel structures
Opis:
Dobór stali do zbrojenia betonowych obiektów mostowych w Polsce bardzo często ogranicza się do określenia klasy wytrzymałości A-IIIN, zgodnej ze starymi normami do projektowania, które nadal są powszechnie stosowane. Zapis taki notorycznie pojawia się w specyfikacjach technicznych dla wielu obiektów mostowych w Polsce.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2018, 1; 56-60
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static response of curved steel thin-walled box-girder bridge subjected to Indian railway loading
Autorzy:
Verma, V.
Nallasivam, K.
Powiązania:
https://bibliotekanauki.pl/articles/2055742.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
steel box-girder bridge
thin-walled structures
finite element technique
Matlab
torsional bi-moment
skrzynkowy dźwigar stalowy
most dźwigarowy
konstrukcje cienkościenne
technika elementów skończonych
bimoment
skręcanie
Opis:
Purpose: The primary objective of the current study is to numerically model the steel thin-walled curved box-girder bridge and to examine its various response parameters subjected to Indian Railway loading. Design/methodology/approach: The analysis is conducted by adopting a one dimensional curved thin-walled box-beam finite beam element based on finite element methodology. The scope of the work includes a computationally efficient, three-noded, one-dimensional representation of a thin-walled box-girder bridge, which is especially desirable for its preliminary analysis and design phase, as well as a study of the static characteristics of a steel curved bridge, which is critical for interpreting its dynamic response. Findings: The analytical results computed using finite element based MATLAB coding are presented in the form of various stress resultants under the effect of various combinations of Indian Railway loads. Additionally, the variation in different response parameters due to changes in radius and span length has also been investigated. Research limitations/implications: The research is restricted to the initial design and analysis phase of box-girder bridge, where the wall thickness is small as compared to the cross-section dimensions. The current approach can be extended to future research using a different method, such as Extended finite element technique on curved bridges by varying boundary conditions and number of elements. Originality/value: The validation of the adopted finite element approach is done by solving a numerical problem, which is in excellent agreement with the previous research findings. Also, previous studies had aimed at thin-walled box girders that had been exposed to point loading, uniformly distributed loading, or highway truck loading, but no research had been done on railway loading. Moreover, no previous research had performed the static analysis on thin-walled box-girders with six different response parameters, as the current study has. Engineers will benefit greatly from the research as it will help them predict the static behaviour of the curved thin-walled girder bridge, as well as assess their free vibration and dynamic response analysis.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2021, 108, 2; 63--74
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inicjacja wzrostu pęknięć w długotrwale eksploatowanych stalach mostowych z punktu widzenia metod energetycznych
The initiation of a crack growth in long-term operated bridge steel in terms of the energy approach
Autorzy:
Lesiuk, G.
Kucharski, P.
Powiązania:
https://bibliotekanauki.pl/articles/251786.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
pękanie
element stalowy
obiekt mostowy
metoda energetyczna
most
cracking
steel element
bridge object
energy method
bridge
Opis:
W artykule omówione zostało zagadnienie odporności na pękanie stalowych elementów konstrukcyjnych obiektów mostowych ze stali zgrzewnych (XIX wiek). Obiektem zainteresowań autorów były fragmenty konstrukcji stalowych hali Dworca Głównego we Wrocławiu (ozn. B) oraz przepustu kolejowego na trasie Jelenia Góra-Żagań – szlak Lwówek Śląski (ozn. A). Dokonano analiz metalograficznych wybranych elementów konstrukcyjnych. W toku przeprowadzonych badań wykazano obecność procesów degradacyjnych tych zabytkowych gatunków stali. Procesy te polegały głównie na wydzieleniach kruchych faz we wnętrzach ziaren ferrytu jak również na ich granicach. Wyznaczono właściwości mechaniczne oraz odporność na pękanie metodą całki J dla próbek pobranych z elementów Dworca Głównego we Wrocławiu. Wykazano, że odporność na pękanie – wyrażona krytyczną wartością całki J – w kierunku walcowania jest znacząco wyższa niż w kierunku poprzecznym do walcowania. Przeprowadzono także symulację komputerową inicjacji wzrostu pęknięcia. Uzyskane na drodze symulacji numerycznych (w środowisku Abaqus) wyniki dobrze korespondują z danymi doświadczalnymi krzywych J-R. Wartym odnotowania jest fakt, że każdorazowo, uzyskane wyniki (na drodze symulacji) wykazują tendencję do „przeszacowania” wartości odporności na pękanie wyrażonej w krytycznych wartościach całek J w stosunku do danych eksperymentalnych. Mimo to, uzyskane wyniki są dalece niższe od wartości krytycznych całek J charakteryzujące współczesne niskowęglowe stale konstrukcyjne (S235JR lub S355JR).
The results of tests of nineteenth century structural elements from the "Dworzec Główny" Main Railway Station in Wrocław and the structural elements from the culvert located along the train line Jelenia Gora - Lwowek Slaski are presented. The presence of micro-structural degradation processes in each investigated material have been identified. The results of static ten-sile strength have been also presented. The fracture toughness (based on J integral) results and J-R resistance behavior have been discussed. The methodology for the determination of JR curves using the finite element method in Abaqus environment is presented and discussed in the numerical parts of issue.
Źródło:
TTS Technika Transportu Szynowego; 2015, 12; 920-927, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of composite structures in bridge engineering. Problems of construction process and strength analysis
Zastosowanie konstrukcji zespolonych w mostownictwie. Problemy konstrukcyjne i analiza wytrzymałościowa
Autorzy:
Flaga, K.
Furtak, K.
Powiązania:
https://bibliotekanauki.pl/articles/396739.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
steel-concrete composite
structures bridge
bridge desk
shrinkage
creep of concrete
konstrukcje zespolone
płyta pomostu
most
pełzanie betonu
Opis:
Steel-concrete composite structures have been used in bridge engineering from decades. This is due to rational utilisation of the strength properties of the two materials. At the same time, the reinforced concrete (or prestressed) deck slab is more favourable than the orthotropic steel plate used in steel bridges (higher mass, better vibration damping, longer life). The most commonly found in practice are composite girder bridges, particularly in highway bridges of small and medium spans, but the spans may reach over 200 m. In larger spans steel truss girders are applied. Bridge composite structures are also employed in cable-stayed bridge decks of the main girder spans of the order of 600-800 m. The aim of the article is to present the construction process and strength analysis problems concerning of this type of structures. Much attention is paid to the design and calculation of the shear connectors characteristic for the discussed objects. The authors focused mainly on the issues of single composite structures. The effect of assembly states on the stresses and strains in composite members are highlighted. A separate part of problems is devoted to the influence of rheological factors, i.e. concrete shrinkage and creep, as well as thermal factors on the stresses and strains and redistribution of internal forces.
Konstrukcje zespolone typu stal-beton są od dziesięcioleci chętnie stosowane w obiektach mostowych. Wynika to z racjonalnego wykorzystania cech wytrzymałościowych betonu i stali. Jednocześnie żelbetowa (lub sprężona) płyta pomostu jest korzystniejsza niż stalowa płyta ortotropowa, stosowana w mostach stalowych (większa masa, lepsze tłumienie drgań, większa trwałość). Najbardziej rozpowszechnionymi w praktyce są mosty zespolone belkowe. Są one stosowane powszechnie w mostach drogowych małych i średnich rozpiętości, ale również w mostach o rozpiętościach przęseł ponad 200 m. Przy większych rozpiętościach przęseł stosuje się dźwigary stalowe kratownicowe. Mostowe konstrukcje zespolone stosowane są również w pomostach mostów podwieszonych o rozpiętościach głównego przęsła rzędu 600-800 m (fig. 6). W artykule przedstawiono problemy realizacyjne i obliczeniowe związane z tego typu konstrukcjami. Wiele uwagi poświęcono konstruowaniu i obliczaniu łączników charakterystycznych dla omawianego rodzaju konstrukcji. Skupiono się głównie na konstrukcjach pojedynczo zespolonych. Zwrócono uwagę na wpływ stanów montażowych na stan odkształcenia i naprężenia w elementach zespolonych. Oddzielna grupa zagadnień dotyczyła wpływu czynników reologicznych - skurczu i pełzania betonu - oraz termicznych na wartości odkształceń i naprężeń oraz redystrybucję sił wewnętrznych.
Źródło:
Civil and Environmental Engineering Reports; 2014, 15; 57-85
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza izolacyjności cieplnej ściany w miejscu osadzenia nadproża stalowego
Analysis of wall thermal insulation at the location of steel lintel
Autorzy:
Nawrot, J.
Powiązania:
https://bibliotekanauki.pl/articles/2065414.pdf
Data publikacji:
2018
Wydawca:
Politechnika Częstochowska
Tematy:
izolacyjność cieplna
mostek termiczny
nadproże stalowe
thermal insulation
thermal bridge
steel lintel
Opis:
W niniejszej publikacji przedstawiono analizę izolacyjności cieplnej ściany zewnętrznej w rejonie osadzenia nadproża drzwiowego, wykonanego z dwóch ceowników stalowych. Rozpatrzono trzy przypadki: ściana nieocieplona, ściana ocieplona izolacją termiczną o grubości 12 cm oraz 15 cm. Dla analizowanych przypadków obliczono wartości liniowego współczynnika przenikania ciepła ψ dla mostka termicznego, powstałego w miejscu wykonania nadproża w ścianie oraz sporządzono mapy rozkładu temperatury w przekroju poprzecznym przegrody. Wskazano na konieczność uwzględnienia lokalnego obniżenia izolacyjności ściany w rejonie nadproża przy ocenie efektywności energetycznej budynku.
This publication, presents an analysis of insulation of the external wall in the region of the door lintel installation, made of two steel channels. Three cases were considered: a noninsulated wall, a wall insulated with a layer of 12 cm thick stryrfoam and 15 cm thick. For the analysed cases, the values of the linear thermal transmittance for the wall at the place of the lintel were calculated and maps of the temperature distribution in the cross-section of the partition were made. It was pointed out that it is necessary to take into account the local reduction of wall insulation in the area of the lintel when assessing the energy efficiency of the building.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2018, 7, 2; 141--148
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza trwałości stalowych obiektów mostowych w zależności od środowiska korozyjnego
Analysis of stability of steel bridge of depending on the corrosive environment
Autorzy:
Śpiewak, A.
Ulewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/105037.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
stalowe obiekty mostowe
trwałość konstrukcji
korozja
steel bridges
durability
bridge structure
corrosion
Opis:
W artykule przedstawiono aktualne statystyki dotyczące sieci dróg województwa śląskiego zarządzanych przez Zarząd Dróg Wojewódzkich oraz ilości konstrukcji w zależności od typu ich ustroju nośnego. Poruszono aktualny w Polsce problem dotycząc trwałości stalowych obiektów mostowych z uwzględnieniem zjawiska korozji. Scharakteryzowano podstawowe czynniki wpływające na szybkość korozji niezbędne do oszacowania wpływu korozji na trwałość stalowych mostów drogowych m.in. czynniki atmosferyczne oraz czynniki wynikające z utrzymania obiektu. Zwrócono szczególną uwagę na kategorie korozyjności środowiska w którym wznoszone są konstrukcje stalowe, mające bardzo znaczący wpływ na postęp i szybkość procesu korozji. Omówiono procedurę badania wpływu korozji na trwałość stalowych konstrukcji mostowych opracowaną przez Instytut Badawczy Dróg i Mostów. Przedstawiono metodę obliczania czasu bezawaryjnego użytkowania konstrukcji. Szczegółowo scharakteryzowano, niezbędne do przeprowadzenia procedury obliczeniowej, redukcyjne współczynniki trwałości. Na podstawie własnej analizy określono czas bezawaryjnej pracy wybranych konstrukcji. Do obliczeń przyjęto cztery rzeczywiste mosty o dźwigarach stalowych, będących konstrukcją nośną dla żelbetowej płyty pomostowej. Wybrane mosty wzniesione zostały w różnych częściach kraju, charakteryzujących się odmienną agresywnością środowiska – środowisko nadmorskie, górskie, miejskie oraz neutralne. Obiekty różnią się rodzajem korozji występującym na ustrojach nośnych konstrukcji. Mosty różnią się również czasem powstania obiektów, co wpływa w znacznym stopniu na ich bezpieczne użytkowanie. Na zakończenie przeanalizowano wyniki otrzymane z przeprowadzonej analizy.
The article presents the current statistics on road network Silesian province managed by the Province Road Authority. Shows the amount of the structure depending on the type of the bearing structure. Presents problems concerning the durability of steel bridges taking into account the corrosion current in Poland. Characterizes basic factors affecting the corrosion rate relevant for the assessment of the impact of corrosion on the durability of steel road bridges, among others, weather conditions and factors concerning facility maintenance. Particular attention is paid to the categories of corrosivity of the environment in which they are constructed steel structures, which have a very large impact on the progress and rate of the corrosion process. Procedure to study the effect of corrosion on the durability of the steel bridge structures developed by the Research Institute of Roads and Bridges. Presents a method for calculating the uptime of the structure. Characterized needed to carry out the calculation procedure, reduction coefficients of durability. Based on its analysis of the specified lifetime of the selected design. The calculation is four real bridges with steel girders, which are the supporting structure for the reinforced concrete plate bridge. Selected bridges were built in different areas of the country, characterized by different aggressiveness of the environment - the environment coastal, mountain, urban and neutral. Objects differ in the type of corrosion occurring on the bearing system. Bridges also differ in the age of objects, which has a significant impact on their safety. At the end of the analyzed results obtained from the analysis.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 1; 43-51
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pierwsze spawane mosty drogowe w Polsce
First welded road bridges in Poland
Autorzy:
Rabiega, Józef
Powiązania:
https://bibliotekanauki.pl/articles/2057745.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
spawanie
mosty stalowe
most spawany
mosty drogowe
historia mostownictwa
welding
steel bridges
welded bridge
road bridges
history of bridge engineering
Opis:
W 1929 roku oddano do użytkowania pierwszy na świecie drogowy most spawany, stanowiący przeprawę przez rzekę Słudwię w miejscowości Maurzyce pod Łowiczem. Niedługo potem wybudowany został spawany most drogowy przez Słudwię w miejscowości Retki, a kilka lat później także spawany most drogowy przez Pilicę w Spale. Projektantem obu spawanych mostów przez Słudwię był prof. Stefan Bryła, znany w Polsce i na świecie pionier spawalnictwa.
In 1929 the first welded road bridge in the world was put into operation, crossing Słudwia river in Maurzyce near Łowicz. Soon afterwards another welded road bridge was built over Słudwia river in Retki and after several years also the welded road bridge over Pilica river in Spała. Both welded Słudwia bridges were designed by professor Stefan Bryła, well known in Poland and around the world as a proponent of welding.
Źródło:
Drogownictwo; 2020, 7-8; 195--201
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane problemy konstrukcyjne i technologiczne mostów stalowych średnich rozpiętości na przykładzie obiektów na Dunaju i Dnieprze
Selected construction and technological problems of middle span length steel bridges based on examples over the Danube and Dnieper
Autorzy:
Ryż, K.
Flaga, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/390477.pdf
Data publikacji:
2010
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
most
stal
belka
konserwacja mostów
inżynieria
bridge
steel
beam
road traffic
engineering
aesthetic
design
bridge preserve
Danube river
Dnieper river
Opis:
Każdy obiekt mostowy charakteryzuje się oryginalnymi rozwiązaniami, możliwościami technologicznymi zastosowanymi w trakcie jego budowy oraz unikalnym charakterem (modą) dostosowanym do czasu swojego powstania. Obiekty zamieszczone w pracy posiadają cechy szczególne dla danego regionu, które są warte przedstawienia w kontekście rozwoju konstrukcji mostowych, myśli inżynierskiej, przeobrażeń społecznych oraz wydarzeń historycznych. We wszystkich zamieszczonych obiektach głównym materiałem konstrukcyjnym jest stal. Każdy z nich był lub jest mostem kolejowym (kolejowo autostradowym). Omówione zostały przykłady mostów powstałych w różnych epokach. Pozwala to w szerszym ujęciu zaobserwować pewien trend, myśl przewodnią ewolucji inżynierii mostowej, która na przestrzeni czasu stale wyznacza nowe perspektywy oraz możliwości pokonywania problemów komunikacyjnych.
Every example of bridge both the aesthetic appearance and technological solutions are unique. Differences are a result of a various historical events, neighbour impact and evolving capabilities of bridge building. Based on the unique features of bridge examples taken into consideration one reveals evolution technology of bridge building in time. The aim is to present some examples of steel bridges which have been considered successful. Bridges are still in use. Each of them was created in different period of time. It shows the altered bridge building idea, fluctuation of trend. The successful design was able to have been improved during time when increasing road traffic forced engineers to adapt bridges into new conditions. Bridge builders found a positive solution to every appeared problem. It help to preserve bridges from being rebuild and clearly showed that bridge building is the finest domain of civil engineering.
Źródło:
Budownictwo i Architektura; 2010, 7, 2; 5-23
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stainless steel bridges
Mosty ze stali nierdzewnej
Autorzy:
Kossakowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/402142.pdf
Data publikacji:
2016
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
bridges
bridge structure
stainless steel
ferritic-austenitic duplex stainless steel
mosty
konstrukcja mostu
stal nierdzewna
stal ferrytyczno-austenityczna typu duplex
Opis:
The paper concerns problems of application of stainless steel as construction material in bridges. The characteristics and properties of stainless steel are discussed, taking into consideration its possibilities for using in bridge engineering. As an example, duplex Uranus 35N stainless steel, which is suitable for use in bridges, is presented. Some examples of bridges, which main structure is made of stainless steel are also shown.
Źródło:
Structure and Environment; 2016, 8, 1; 37-44
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza numeryczna segmentu stalowo-betonowego dźwigara mostowego obciążonego ciężarem własnym
Numerical analysis of segment of steel-concrete bridge girder loaded by dead load
Autorzy:
Lacki, P.
Nawrot, J.
Derlatka, A.
Powiązania:
https://bibliotekanauki.pl/articles/2068039.pdf
Data publikacji:
2016
Wydawca:
Politechnika Częstochowska
Tematy:
stalowo-betonowe belki zespolone
dźwigary mostowe VFT
steel-concrete composite beams
VFT bridge girder
Opis:
W artykule omówiono podstawowe informację dotyczące kształtowania zespolonych dźwigarów mostowych typu VFT. Zaproponowano nowy kształt linii cięcia blachy środnika w celu uzyskania zespolenia typu „composite dowels”. Dla przyjętego rozwiązania sporządzono model numeryczny segmentu zespolonego dźwigara mostowego, który poddano analizie za pomocą programu ADINA System. Model obciążono ciężarem własnym. Na podstawie uzyskanych wyników oceniono przydatność analizowanego rozwiązania do stalowo-betonowych mostów zespolonych.
The paper presents the basic information about the development of a VFT composite bridge girder. A new shape of cutting line of the web sheet in order to obtain “composite dowels” was proposed. For the adopted solution, a numerical model of the bridge girder segment was prepared and it was analyzed with the ADINA System. The model was loaded by dead load. Based on the results, the suitability of the analyzed solution to steel-concrete composite bridges was assessed.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2016, 22 (172); 204-212
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pierwsi naczelnicy Wydziału Mostowego Departamentu Dróg Kołowych
First heads of the Bridge Division in the Road Department
Autorzy:
Mistewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/143958.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
naczelnik
wydział mostowy
most
Wisła
Warszawa
odbudowa
stalowa konstrukcja spawana
Head of the Bridge Division
bridge
Vistula river
Warsaw
reconstruction
steel welded structure
Opis:
W artykule przedstawiono życie i zawodowe osiągnięcia dwóch pierwszych naczelników Wydziału Mostowego Departamentu Dróg Kołowych Ministerstwa Robót Publicznych – inżynierów Michała Strożeckiego i Stefana Bryły, którzy żyli na przełomie XIX i XX wieku. Opisano również historię odbudowy ze zniszczeń pierwszej wojny światowej mostu księcia Józefa Poniatowskiego przez Wisłę – zbudowanego w 1914 roku przez Magistrat Warszawy i użytkowanego do dzisiaj. W 1929 roku w moście przez rzekę Słudwię koło Łowicza, została zastosowana pierwsza w świecie spawana konstrukcja stalowa ustroju niosącego. Została ona zaprojektowana przez inżyniera Stefana Bryłę – wówczas profesora Politechniki Lwowskiej.
The article presents life and professional achievements of the first two head managers of the Bridge Division in the Road Department, Ministry of Public Works – engineer Michał Strożecki and engineer Stefan Bryła,who lived at the turn of 19th and 20th centuries. It describes the history of the reconstruction from World War I damage of the Prince Józef Poniatowski Bridge overthe river Vistula – built in 1914 by the Warsaw Municipality and useduntil now. In 1929 the first in the world welded steel superstructure in was used in the construction of the bridge over the river Słudwia near the City of Łowicz. It was designed by engineer Stefan Bryła – the then professor of the Lwów Technical University.
Źródło:
Drogownictwo; 2018, 1; 24-29
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ losowych nierówności toru na drgania wybranego układu most zespolony / nawierzchnia kolejowa / pociąg szybkobieżny
Effect of random track irregularities on selected composite bridge / track structure / high-speed train system vibrations
Autorzy:
Podwórna, M.
Klasztorny, M.
Powiązania:
https://bibliotekanauki.pl/articles/389886.pdf
Data publikacji:
2013
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
most zespolony
nawierzchnia kolejowa podsypkowa
pociąg szybkobieżny ICE-3
losowe nierówności toru
modelowanie
symulacja
badania numeryczne
steel concrete composite bridge
ballasted track structure
ICE-3 high–speed train
random track irregularities
modelling
simulation
numerical analysis
Opis:
Opracowano quasi-ścisłą teorię modelowania jednowymiarowego (1D), fizycznego i matematycznego, układu most zespolony / nawierzchnia kolejowa podsypkowa / pociąg szybkobieżny (BTT), przy uwzględnieniu lepkosprężystych zawieszeń pojazdów szynowych na dwuosiowych wózkach jezdnych, nieliniowej sztywności kontaktowej Hertza i jednostronnego kontaktu między zestawami kołowymi a szynami, cech lepkosprężystych i bezwładnościowych mostu, lepko sprężystej nawierzchni kolejowej na moście i poza mostem, płyt przejściowych i losowych nierówności toru. Na podstawie tej teorii opracowano zaawansowane algorytmy komputerowe modelowania numerycznego układów BTT oraz program komputerowy do symulacji drgań pionowych tych układów. W ramach wstępnych badań dynamicznych rozważono most zaprojektowany zgodnie z polskimi normami, o rozpiętości teoretycznej przęsła 15,00 m, oznaczony kodem SCB-15. Most obciążono niemieckim pociągiem szybkobieżnym ICE-3, poruszającym się z prędkością krytyczną (270 km/h) i maksymalną (300 km/h).
A theory of the quasi-exact physical and mathematical modelling of the composite (steel–concrete) bridge / ballasted track structure / high-speed train system (BTT) was developed, including viscoelastic suspensions of rail-vehicles on two-axle bogies, the non-linear Hertz contact stiffness and one-sided contact between the wheel sets and the rails, the viscoelastic and inertia features of the bridge, the viscoelastic track structure on and beyond the bridge, the approach slabs, and random track irregularities. Based on this theory, advanced computer algorithms for the BTT numerical modelling were written and a computer program to simulate the vertical vibrations of the BTT systems was developed. The bridge subject to the preliminary dynamic analysis and designed according to Polish standards has a 15.00 m span length. The bridge was loaded by the German ICE-3 high-speed train moving at the critical (180 and 270 km/h) and the maximum (300 km/h) operating speeds.
Źródło:
Budownictwo i Architektura; 2013, 12, 1; 259-266
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza numeryczna wpływu wymiarów i sposobu mocowania belek poprzecznych na wytężenie dźwigarów głównych mostów niskowodnych
Analysis of influence of cross-beam sizes and methods for their mounting on maximum value of stresses in main girders of low-water bridges
Autorzy:
Duchaczek, A.
Powiązania:
https://bibliotekanauki.pl/articles/402853.pdf
Data publikacji:
2016
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
metoda elementów skończonych
most niskowodny
konstrukcja stalowa
finite element method
low-water bridge
steel construction
Opis:
Wojskowe mosty niskowodne są obiektami inżynierskimi przeznaczonymi do krótkotrwałego użytkowania. Tego typu rozwiązania konstrukcyjne pojawiają się również w cywilnych obiektach mostowych. W literaturze przedmiotu nie podano jednak wytycznych do ich projektowania w przypadku wykorzystania jako stężeń poprzecznych pojedynczych ceowników i dwuteowników stalowych (tak zwanych belek poprzecznych). W niniejszej pracy przeanalizowano wpływ zarówno zmiany sztywności przyjętych w obliczeniach numerycznych połączeń montażowych, jak i sztywności samych belek poprzecznych na maksymalne wartości naprężeń w dźwigarach głównych wojskowych mostów niskowodnych. Na podstawie przeprowadzonych obliczeń stwierdzono, że w przypadku dźwigarów głównych wykonanych z dwuteowników stalowych o wysokości 400 mm, przy założeniu, że ich rozstaw nie przekracza odległości 0,80 m, stosowanie belek poprzecznych z kształtowników stalowych o wysokości zbliżonej do wartości połowy wysokości dźwigara głównego jest zupełnie wystarczające.
The military low-water bridges are engineering objects designed for short term use. This type of construction solutions also appear in civil engineering. However, in the professional literature there are not any guidelines how to design crossbeam made of the steel beams. In this paper the impact of the crossbeams rigidity and their connections on the stress distribution in the major girders of military lowwater bridges was analysed. Based on conducted calculations, it was found that in the case main girders made of steel I-beams (height 400 mm), provided that their spacing did not exceed a distance of 0.80 m, the application of the cross-beams made of steel sections with a height similar to the half the height of the main girder was sufficient.
Źródło:
Budownictwo i Inżynieria Środowiska; 2016, 7, 4; 207-216
2081-3279
Pojawia się w:
Budownictwo i Inżynieria Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena przyczyn uszkodzeń i metoda naprawy elementów pomostu mostu kratownicowego
Assessement of the reasons and repair method of the railway truss bridge deck defects
Autorzy:
Hebda, M.
Powiązania:
https://bibliotekanauki.pl/articles/105217.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
most kratownicowy
przesuwne oparcie podłużnic
łożyska stalowe
truss bridge
sliding support of stringer
steel bearing
Opis:
Artykuł dotyczy zagadnień związanych z pracą statyczną poprzecznic w kolejowych mostach stalowych z otwartym pomostem. Przedstawiono problem zwiększonego wytężenia i odkształcenia poprzecznic od sił poziomych, wywołanych zmianą długości pasów dźwigarów głównych i sił hamowania pojazdów. Na przykładzie mostu kolejowego przez rzekę Wartę w Sieradzu omówiono charakterystyczne dla tego zjawiska uszkodzenia elementów jezdni mostu oraz sposób ich naprawy, z zastosowaniem indywidualnie zaprojektowanych łożysk, umożliwiających przegubowo przesuwne oparcie podłużnic na poprzecznicach.
This article deals with issues related to the static work of floor beams in open-deck steel railway bridges. The problem of increased strain and deformation of floor beams from horizontal forces caused by the change of the length of the main girders and the braking force of the vehicles is presented. The example of a bridge over the Warta River in Sieradz is characterized by the characteristic damage to the bridge carriageway components and the way they are repaired, using individually designed steel bearings to enable the sliding support of the stringers on the cross members.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 3/I; 179-188
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The history of the railway bridges by the Citadel in Warsaw
Historia mostów kolejowych pod Cytadelą w Warszawie
Autorzy:
Bladyniec, T.
Powiązania:
https://bibliotekanauki.pl/articles/230831.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
most
cytadela
zniszczenie
historia
odbudowa
kratownica stalowa
Warszawa
bridge
Citadel
destruction
history
reconstruction
steel truss
Warsaw
Opis:
In 1875 a steel railway bridge was built in northern Warsaw. It had seven spans of 66.22 m and two spans of 15.24 m. In 1908 the second railway bridge was built downstream of the older one. The spacing of supports and spans were the same as in the older bridge. During World War I, both bridges were blown up and then rebuilt, first temporarily and then permanently. Again both were blown up in 1944. In 1945, a temporary crossing was built. In 1947 a permanent bridge was rebuilt, partially replacing rivets with welding. On the pillars of the older bridge, the Gdański Bridge was built (not in this study). In 1963 welded connections were strengthened, in 1980 the structure of the northern track was replaced. In 2016, the northern track was renovated. The replacement of the structure of the southern track is ongoing since 2018.
W 1873 roku władze rosyjskie podjęły decyzję o budowie Linii Obwodowej łączącej linie kolejowe Warszawa – Wiedeń, Warszawa – Petersburg i Warszawa – Terespol. Budowa wymagała nowej przeprawy przez Wisłę. Wybrano konstrukcję typu amerykańskiego z równoległymi pasami i krzyżulcową kratą. Nowa przeprawa miała liczyć siedem swobodnie podpartych przęseł kratownicowych po 66,22 m rozpiętości podporowej oraz dwóch niewielkich przęseł brzegowych o konstrukcji blachownicowej i rozpiętości po 15,24 m. Dźwigary mostu miały wysokość 6,02 m i rozstaw 5,18 m. Przeprawa była dwupoziomowa. Górną jej część przewidziano dla ruchu kolejowego z pojedynczym, specjalnym torem o czterech szynach (zespolonym). Dolna część mostu została natomiast przewidziana dla ruchu pieszego i kołowego. Budowa rozpoczęła się w kwietniu 1873. Ustrój niosący wykonano ze stali zlewnej z Anglii. Stalowa blacha pochodziła z Belgii, cement z Anglii, a granit na oblicowanie podpór ze Szwecji. Przyczółek na prawym brzegu Wisły i wszystkie filary posadowiono na stalowych kesonach, zaś przyczółek lewobrzeżny bezpośrednio na gruncie. Zasadnicze roboty przy budowie mostu zakończono do lutego 1875. 19 listopada 1875 miał miejsce urzędowy odbiór mostu. Ruch kolejowy przez most stopniowo wzrastał. Ponieważ był on zaprojektowany z myślą o lokomotywach o nacisku 13 ton na oś, nie mogły się nim poruszać parowozy nowego typu o nacisku 20 ton na oś. Zapadła zatem decyzja o budowie drugiego mostu kolejowego przy Cytadeli, a także o przebudowie istniejącego w celu zwiększenia jego nośności. Opracowano nowy projekt. Nowy, dwutorowy most kolejowy przy Cytadeli zlokalizoano 32 m w dół rzeki względem starego. Jego filary umieszczono w osiach starych, a rozpiętości przęseł były takie jak w sąsiedniej przeprawie. Ustrój składał się w dwóch swobodnie podpartych, stalowych dźwigarów kratownicowych. Były one oddzielne dla każdego toru, spoczywały jednak na wspólnych podporach. Pasy górne i dolne kratownic były względem siebie równoległe; ich rozstaw wynosił 3,42 m, a wysokość 6 m – tyle samo, co w starym moście. Ruch miał odbywać się po górnej części dźwigarów. Na każdym z nich ułożone miały zostać po jednym torze zespolonym złożonym z czterech szyn.
Źródło:
Archives of Civil Engineering; 2019, 65, 1; 157-169
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Innowacyjna kładka dla pieszych w Lublinie
An innovative footbridge in the city of Lublin
Autorzy:
Karaś, Sławomir
Gnyp, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2057797.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
stalowe kładki dla pieszych
estetyka mostów
komfort pieszych na kładce
steel footbridge
bridge aesthetics
pedestrian comfort
Opis:
W artykule przedstawiono procesy projektowania, montażu i dynamicznych obciążeń próbnych nowej kładki stalowej w Lublinie. To dwupokładowa konstrukcja z dwóch przeplatających się dźwigarów w kolorze srebrnym z drewnianymi chodnikami. Most o długości 45 m i wysokości 5 m tworzy miejski punkt węzłowy, który wyróżnia się swoim pięknem. Badania dynamiczne wykazały, że ryzyko niestabilności jest niewielkie w przypadku przeciętnego chodzenia lub biegania, a także spełnione są kryteria komfortu pieszych.
Processes of design, erection and dynamical proof load test of a new steel footbridge in the city of Lublin were depicted. This is the double deck structure of two intertwined girders in silver colour with wooden pavements. The 45 m long and 5 m height footbridge creates the city nodal point, highlights due to its beauty. Dynamical testing shown that the risk of instability is weak in case of average walking or running as well as the criteria of pedestrian comfort are fulfilled.
Źródło:
Drogownictwo; 2021, 3; 77--88
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue assessment of existing riveted truss bridges: case study
Autorzy:
Siwowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/202445.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
durability
fatigue
steel structure
bridge
riveted truss
eurocodes
trwałość
zmęczenie
konstrukcja stalowa
most
nitowana kratownica
eurokody
Opis:
Many steel riveted bridges have been built in Poland since 1950 and they have not reached their design working lives yet. Nevertheless, a number of fatigue damages are found, especially with structural joints. Moreover, in the past 25 years the traffic on the Polish road network has increased significantly leading to the increasing number of heavy vehicles in the traffic flows. This may affect the safety, serviceability and durability of existing bridges. The road administration is therefore interested in reliable and agreed methods to assess the safety and durability of existing bridges. The special procedure has been prepared to provide technical insight on the way in which existing steel structures could be assessed and the remaining fatigue life could be estimated. This approach follows the principles and application rules in the Eurocodes and provides a scheme with various levels of analysis: a basic level with general methods and further levels, more complex and sophisticated and requiring specific experience and knowledge. This procedure has been used for the fatigue assessment of the 60-year-old riveted truss bridge. The applied procedure as well as the main results of the assessment have been presented in the paper.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2015, 63, 1; 125--133
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Günther Trauer i jego dzieła mostowe we Wrocławiu
Günther Trauer and his bridge works in Wrocław
Autorzy:
Rabiega, Józef
Olczyk, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/24024808.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
historia mostownictwa
mosty Wrocławia
mosty stalowe
most żelbetowy
bridge history
bridges in Wrocław
steel bridges
concrete bridges
Opis:
Günther Trauer (1878–1956) zapisał się w historii Wrocławia jako budowniczy Hali Stulecia, mostu Warszawskiego Starego, Trzebnickiego Północnego czy mostów Pomorskich. Jego dorobek jest jednak znacznie większy – w ciągu 31 lat działalności w Breslau przyczynił się do powstania przynajmniej 20 obiektów mostowych o konstrukcji stalowej i żelbetowej. Nadał on także bieg wielu ulicom na terenie miasta oraz projektował układ urbanistyczny w wielu częściach Wrocławia.
Günther Trauer (1878–1956) went down in the history of Wrocław as the builder of the Centennial Hall, Older Warszawski Bridge, Northern Trzebnicki Bridge or Pomorskie Bridges. His legacy is far greater than that – during 31 years of operation in Breslau he contributed to the construction of at least 20 steel and concrete bridges. He also designed the course of many streets and planned the urban layout in various parts of Wrocław.
Źródło:
Drogownictwo; 2022, 9; 323--332
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strefa nad filarem ciągłych ustrojów mostów zespolonych stal-beton – przegląd patentów
The zone above the pillar of a composite steel-concrete continuous bridge superstructure – a patents review
Autorzy:
Karaś, Sławomir
Kamińska, Izabela
Powiązania:
https://bibliotekanauki.pl/articles/24024755.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
patenty
ciągłe ustroje nośne mostów
mosty zespolone stal-beton
Espacenet
patents
continuous bridge superstructures
steel-concrete composite bridges
Opis:
Celem artykułu jest prezentacja patentów z zakresu projektowania strefy nad filarem ustrojów nośnych zespolonych stal-beton. Została wykorzystana przeglądarka Espasnet, która umożliwia dostęp do ponad 90 milionów dokumentów patentowych. Po wpisaniu zakresu tematycznego procedura wybrała 537 tytułów patentów, z których wyselekcjonowano 22 dokumenty zamieszczone w artykule. Rozwiązania patentowe są różnorodne, nie ma dominującej grupy technologii. Większość patentów pochodzi z Chin. W większości są to rozwiązania, które zastosowano podczas budowy mostów. Odnaleziono dwa patenty polskie.
The purpose of this paper is to present patents in the field of hogging bending zone design in steel-concrete composite bridges. The Espasnet browser, which provides access to over 90 million patent documents, was used. After entering the subject area, the procedure selected 537 patent titles, from which the 22 documents presented in this paper were selected. The patent solutions are diverse and there is no dominant technology among them. Most of the patents are from China, and majority of them are solutions used in bridge construction. Two Polish patents were found.
Źródło:
Drogownictwo; 2022, 4; 100--113
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical and theoretical research on spatial shear lag effect of self-anchored suspension bridge steel box girder
Autorzy:
Li, Yanfeng
He, Ying
Bao, Longsheng
Sun, Baoyun
Wang, Qinghe
Powiązania:
https://bibliotekanauki.pl/articles/1852505.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
most samozakotwiony
most wiszący
dźwigar skrzynkowy
dźwigar stalowy
efekt opóźnienia ścinania
analiza elementów skończonych
self-anchored bridge
suspension bridge
steel box girder
shear lag effect
finite element analysis
Opis:
The shear lag effect of the steel box girder section in a self-anchored suspension bridge was investigated in this study. Finite element analysis software Midas Civil was used to discretize the girder under analysis into space plate elements and establish a plate element model. The law of shear lag in the longitudinal direction of the girder in the construction and completion stages was determined accordingly. The shear lag coefficient appears to change suddenly near the side support, middle support, side cable anchorage area, and near the bridge tower support of the steel box girder under the imposed load. The most severe shear lag effect is located near the side support and near the side cable anchorage area. Steel box girder sections are simulated before and after system conversion to analyze the shear lag coefficient in the bridge construction stage. The results show that the shear lag coefficient markedly differs before versus after system conversion due to the different stress mechanisms. The finite element analysis results were validated by comparison with the results of an analysis via analogous rod method.
Źródło:
Archives of Civil Engineering; 2021, 67, 2; 631-651
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on sling replacement of concrete-filled steel tube arch bridge
Autorzy:
Zhang, Kexin
Qi, Tianyu
Xue, Xingwei
Li, Yafeng
Zhu, Zhimin
Powiązania:
https://bibliotekanauki.pl/articles/1852540.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rura stalowa wypełniona betonem
most łukowy
podwieszenie
obliczenia symulacyjne
monitorowanie
concrete-filled steel tube
arch bridge
sling
simulating computation
monitoring
Opis:
Concrete-filled steel tube arch bridge is filled with concrete inside the steel tube. The radial constraint of the steel tube limits the expansion of the compression concrete, which makes the concrete in the three-way compression state, thus significantly improving the compressive strength of the concrete. At the same time, it can simplify the construction process and shorten the construction period. Since the rapid development of concretefilled steel tubular tied arch bridge in the 1990s, a large number of such Bridges have suffered from the defects of steel concrete, loose tie rod, and hanger rod rust, etc. Therefore, the reinforcement technology for various diseases has been studied, among which the reinforcement technology for hanger rod replacement is the most complicated and more difficult. As more and more bridges of this type enter the period of reinforcement, it is more and more urgent to study the reinforcement technology of suspenders. Taking a bridge that has been in service for 23 years as an example, this paper discusses the construction method and construction monitoring of replacing the suspender, so as to guide the construction monitoring of the bridge. Finally, the construction monitoring results of the bridge are given, which can provide reference for the replacement of the suspender of this type of bridge.
Źródło:
Archives of Civil Engineering; 2021, 67, 2; 597-610
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania doświadczalne w zakresie obciążeń zmęczeniowych stalowego dźwigara mostu wojskowego mającego szczelinę
Experimental tests in the fatigue loads range of military bridge steel girder with crack
Autorzy:
Duchaczek, A.
Mańko, Z.
Powiązania:
https://bibliotekanauki.pl/articles/408975.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska
Tematy:
most wojskowy
dźwigar stalowy
zmęczenie materiału
pęknięcie zmęczeniowe
analiza numeryczna
military bridge
steel girder
material fatique
fatigue crack
numerical analysis
Opis:
W pracy przedstawiono wyniki badań doświadczalnych stalowego dźwigara mostu wojskowego w zakresie obciążeń zmęczeniowych. Szczególną uwagę poświęcono wpływowi otworów montażowych i wykonanego pęknięcia zmęczeniowego na rozkład naprężeń w obrębie otworów montażowych usytuowanych w środniku dźwigara głównego, które porównano z rezultatami otrzymanymi z przeprowadzonych analiz numerycznych.
In the paper results of experimental tests on a military bridge steel girder with respect to the fatigue loads were presented. A special attention was paid to the influence of mounting holes and the fatigue crack made on the stress pattern within assembling holes located in the girder web. The results of experimental tests, conducted in lab conditions using an strain gauges, were compared to the results of numerical analyses.
Źródło:
Wybrane Problemy Inżynierskie; 2011, 2; 91-96
2083-1021
Pojawia się w:
Wybrane Problemy Inżynierskie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optymalizacja położenia otworów montażowych w dźwigarach stalowych mostów niskowodnych
Optimization of mounting holes locations in steel low-level bridge girders
Autorzy:
Duchaczek, A.
Mańko, Z.
Powiązania:
https://bibliotekanauki.pl/articles/347966.pdf
Data publikacji:
2014
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
mosty wojskowe
optymalizacja
otwór montażowy
dźwigar stalowy
metoda elementów skończonych
optimization
mounting hole
military bridge
steel girder
finite elements method
Opis:
W pracy dokonano optymalizacji lokalizacji i wielkości otworów montażowych wykonywanych w stalowych dźwigarach głównych mostów niskowodnych ze względu na ich wpływ na trwałość końcową obiektów. Analizowane zagadnienie związane było z optymalizacją konstrukcji, a dokładnie z położeniem otworów montażowych, tylko pod kątem wytrzymałościowym.
In the article the authors optimize the location and size of mounting holes in steel main girders of low-level bridges with regard to the final durability of the span. The issue under analysis related to the optimization of the structure, or more precisely to the location of mounting holes, only in terms of durability.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2014, 3; 184-196
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Naprawa deformacji stalowych elementów konstrukcyjnych obiektów mostowych metodą formowania termicznego
Bridges deformed steel structural components repairing by thermal forming
Autorzy:
Kurp, P.
Powiązania:
https://bibliotekanauki.pl/articles/314289.pdf
Data publikacji:
2013
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
mosty
naprawa uszkodzeń
konstrukcje mostowe
konstrukcje stalowe
formowanie termiczne
bridges
thermal forming
bridge constructions
steel components
repair of damages
repairing
Opis:
Metody termicznego formowania należą do bezkontaktowych metod zmian kształtu elementów. Mechanizmem napędowym procesu jest rozszerzalność termiczna - naturalne zjawisko zachodzące dla wszystkich materiałów. Formowanie termiczne pozwala na naprawę uszkodzonych obiektów mostowych bez konieczności ich demontażu co znacznie skraca czas naprawy i pozwalana na szybsze oddanie takich obiektów do użytku. Czas oddania obiektu odgrywa kluczową kwestię w sensie logistycznym, ponieważ wpływa na poprawienie przepustowości istniejącej infrastruktury drogowej oraz kolejowej z jak najkrótszym wyłączeniem jej z ruchu. Przekłada się to na lepsze planowanie tras przejazdu, z jak najmniejszymi opóźnieniami spowodowanymi przez objazdy, które mogą być konsekwencją zamknięcia drogi na czas naprawy, bądź też opóźnieniami spowodowanymi znacznym zmniejszenie przepustowości uszkodzonego odcinka drogowego. Naprawa niedużych uszkodzeń ma ponadto istotny wpływ na bezpieczeństwo w transporcie, wynikające z dopuszczenia obiektu do ruchu z pełnym obciążeniem ruchem. W niniejszym artykule autor podał przykłady możliwych uszkodzeń oraz zaprezentował sposoby formowania termicznego elementów konstrukcji mostowych, które ulegają uszkodzeniu w trakcie eksploatacji, na skutek impaktu z poruszającymi się pojazdami oraz na skutek działania skrajnych warunków atmosferycznych. Ponadto autor przedstawił model analityczny pozwalający na przewidywanie kierunku deformacji oraz zaprezentował wyniki badań eksperymentalnych nad formowaniem termicznym.
Thermal forming methods are non contact shape change methods of various elements. The methodology behind this process is formed by thermal expansion - a natural phenomenon occurring for all materials. Thermoforming allows repairing damaged bridges without necessity to dismantle their structures. This method reduces repairing time. Putting construction of a bridge to public use is a key issue in terms of logistics as this can substantially improve traffic flow on existing road or railway infrastructure with minimum disturbance to public users. This shifts into better route planning, minimizes possible delays caused by future detours incurred by road closures caused by repairs or reduction of overall road capacity. Small defects repair has also a significant influence on transport safety, arising from the approving to use of the object with full load traffic. Author of this paper shows examples of possible bridge damages and presents ways to thermoforming structural components of bridges which were damaged during the exploitation, due to the impact from moving vehicles, and as a result of extreme weather conditions. Author presents analytical model which give us opportunity to predict the direction of deformation. The results of experimental studies on thermal forming will be presented in this paper as well.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2013, 14, 3; 625-635
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ekologiczne, estetyczne i ekonomiczne aspekty konstrukcji gruntowo-powłokowych na przykładzie przebudowy mostu drogowego w Żórawinie
Reconstruction of the road bridge in Żórawina as the example of ecological, aesthetic and economic values of soil-steel structures
Autorzy:
Antoniszyn, G.
Powiązania:
https://bibliotekanauki.pl/articles/390858.pdf
Data publikacji:
2016
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
konstrukcje gruntowo-powłokowe
przebudowa mostu
estetyka
ekologia
konserwator zabytków
soil-steel structure
bridge reconstruction
aesthetics and ecology
conservator of monuments
Opis:
W artykule przedstawiono zagadnienia związane z przebudową mostu drogowego w miejscowości Żórawina. Istniejący obiekt został wymieniony na nowy, o konstrukcji gruntowo-powłokowej. Przyjęte rozwiązania, spełniając wytyczne ochrony konserwatorskiej, pozwoliły na wykonanie estetycznej i zarazem efektywnej ekonomicznie konstrukcji mostowej. Bardzo ważnym czynnikiem, decydującym o końcowych rozwiązaniach konstrukcyjnych, był także czas niezbędny do realizacji inwestycji.
The article presents issues related to the reconstruction of the road bridge in the village Żórawina. An existing bridge was replaced by a new soil-steel structure. The adopted solutions, which fulfill the guidelines of conservator’s protection, allowed making aesthetic and simultaneously economically efficient bridge structure. The time needed to carry out the investment was also a very important factor in determining the final design solutions.
Źródło:
Budownictwo i Architektura; 2016, 15, 1; 149-156
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Budowa nowego mostu Trojskiego w Pradze
Construction of the new Troja Bridge in Prague
Autorzy:
Vítek, J. L.
Šašek, L.
Brož, R.
Janata, V.
Powiązania:
https://bibliotekanauki.pl/articles/365692.pdf
Data publikacji:
2013
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
most
Praga
obwodnica
most Trojski
rozwiązania konstrukcyjne
konstrukcje betonowe
konstrukcje stalowe
wieszak
monitoring
bridge
Prague
bypass
design solutions
steel structures
hanger
Opis:
Obecnie w Pradze budowana jest północna część obwodnicy miasta. Projekt ten jest znany pod nazwą kompleks tunelowy Blanka, a w jego skład wchodzą liczne budowle tunelowe. Do kompleksu zaliczany jest również nowy most przez Wełtawę, który będzie służył komunikacji tramwajowej, samochodowej oraz pieszej. Po jego ukończeniu możliwa będzie rozbiórka istniejącego mostu tramwajowego, który jest eksploatowany od czasu ostatniej przebudowy mostu Barykadników.
The new Troja Bridge in Prague represents a significant original hybrid structure crossing the Vltava River. The network steel arch with the deck made of prestressed concrete forms the main span of the bridge 200.4 m long. The side span made of prestressed concrete is about 40 m long. The construction was started by incremental launching of the bridge deck using temporary supports in the river. After casting of the slab of the bridge, the arch was assembled. The final stage will be the installation and pre-stressing of the hangers. Then, the temporary supports will be removed and the bridge will be completed.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2013, 2; 40-47
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metody georadarowej do oceny poprawności wykonania konstrukcji gruntowo-powłokowej
Application of GPR method for soil-steel structure exucution correctness assessment
Autorzy:
Świt, G.
Kosno, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/105189.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
badania nieniszczące
metoda georadarowa
przegląd
obiekt mostowy
konstrukcje gruntowo-powłokowe
SuperCor
non-destructive testing
GPR method
bridge inspection
soil-steel structures
Opis:
Konstrukcje gruntowo-powłokowe są obecnie szeroko stosowane ze względu na swoje zalety, wśród których wymienić można: niższe koszty budowy i utrzymania obiektu, skrócony czas wykonania oraz uproszczenie konstrukcji w porównaniu z konstrukcjami klasycznymi. Nie bez znaczenia są również ich walory architektoniczne. Konstrukcje podatne wykazują jednak istotne różnice w budowie oraz sposobie pracy w stosunku do klasycznych konstrukcji sztywnych. Niezrozumienie zachodzących zjawisk może powodować występowanie błędów projektowych oraz wykonawczych, które mogą być przyczyną awarii, a w skrajnym przypadku nawet katastrofy. Odpowiednio wczesne wykrycie błędów i ich eliminacja pozwalają zatrzymać degradację obiektu i wydłużyć okres jego użytkowania. W celu wykrycia występujących nieprawidłowości należy zastosować nieniszczące metody badawcze (NDT), które umożliwiają ocenę poprawności wykonania zakrytych elementów konstrukcyjnych. Jedną z najpopularniejszych metod badawczych jest technika georadarowa,. Obecnie znajduje ona szerokie zastosowanie w budownictwie komunikacyjnym, gdzie wykorzystuje się ją do oceny stanu technicznego klasycznych konstrukcji mostowych, nawierzchni drogowych oraz lotniskowych, czy nasypów kolejowych. Do chwili obecnej metoda georadarowa nie znalazła jednak zastosowania w badaniach podatnych konstrukcji gruntowopowłokowych. W artykule przedstawiono przykład zastosowania techniki georadarowej do oceny poprawności wykonania oraz stanu technicznego obiektu mostowego typu SuperCor. Jako rezultat badań uzyskano serię radargramów przetworzonych przy użyciu dedykowanego oprogramowania, co umożliwiło określenie prędkości propagacji fali w warstwach konstrukcyjnych oraz wykrycie niewłaściwego wykonania warstw i elementów konstrukcyjnych obiektu. Występowanie tych anomalii może istotnie wpływać na trwałość obiektu.
Soil-steel structures are widely used due to its advantages including lower cost of construction and maintenance, quicker construction process and simplification of structure in comparison to traditional structures. Architectural values are also significant. However flexible structures present relevant differences in structure and work manner in relation to traditional rigid objects. Lack of understanding of these phenomena may lead to design and execution faults that may be a reason of failure, and in an extreme case even a building collapse. Early detection of faults and its elimination allows to stop the deterioration of an object and to extend its service life. In order to detect existing incorrectness, the non-destructive testing methods (NDT) should be applied. These methods enable the assessment of inaccessible construction members execution correctness. One of the most popular testing methods is Ground Penetrating Radar technique. Presently it is widely applied in communication engineering for technical condition assessment of traditional bridge structures, road and airfield pavements or railway embankments. To date GPR method is not applied for flexible soil-steel structures assessment. This paper presents an example of GPR technique application for assessment ofexecution correctness and technical condition of a SuperCor flexible bridge structure. As a result a series of processed radargrams were obtained which allowed determination of wave propagation velocity, detection of improper execution of structural layers and construction members. The anomalies recorded may affect the life span of the structure.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 3/I; 153-164
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue stress analysis of orthotropic steel bridge decks in Xinghai Bay Cross-sea Bridge
Autorzy:
Li, Wenwu
Qin, Sifeng
Wang, Huili
Powiązania:
https://bibliotekanauki.pl/articles/230385.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
płyta stalowa
płyta ortotropowa
linia wpływu
naprężenie zmęczeniowe
most morski
Xinghai
orthotropic deck
steel deck
influence line
fatigue stress
cross-sea bridge
Opis:
Fatigue properties of orthotropic steel bridge deck of Xinghai Bay Cross-sea Bridge in Dalian were analyzed. The segment model of orthotropic bridge deck was established by using the finite element software Abaqus. The intersection between diaphragm and U-rib was selected to analysis. The fatigue loading model III was adopted which was provided by “Specifications for Design of Highway Steel Bridge”. First, the transverse stress influence line and the transverse severest loading position were determined. Then, five loading regions were selected near the transverse severest position. The stress amplitude of the intersection was ascertained through loading on the longitudinal bridge for each region. Finally, the fatigue checking for the intersection was carried out. The results showed that the maximum fatigue stress amplitude of orthotropic deck in Xinghai Bay Cross-sea Bridge met the requirements of "Specifications for Design of Highway Steel Bridge".
Źródło:
Archives of Civil Engineering; 2020, 66, 1; 327-340
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recykling stalowych konstrukcji przęseł mostów kolejowych
Autorzy:
Pawłowski, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/129019.pdf
Data publikacji:
2020
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
przęsło mostowe
demontaż
konstrukcja stalowa
użycie powtórne
sposób podziału
transport
składowanie
recyklizacja
bridge span
disassembly
steel structure
reuse
split method
storage
recycling
Opis:
W artykule przedstawiono, na przykładzie dwóch przęseł mostowych, sposoby powtórnego użycia konstrukcji stalowych. Należy zwrócić uwagę, że już na etapie demontażu konstrukcji bardzo ważną decyzją jest to, czy konstrukcja będzie powtórnie użyta. Sposób podziału na elementy wysyłkowe, transport, składowanie – to wszystko jest zależne od tego, jaki będzie dalszy los konstrukcji i czy będzie się ona nadawała do powtórnego użycia. Czynników wpływających na możliwość ponownego wykorzystania konstrukcji jest bardzo wiele. Celem prowadzonych w ramach niniejszego artykułu rozważań jest wskazanie czynników, jakie należy wziąć pod uwagę przy podejmowaniu decyzji o ponownym wykorzystaniu zdemontowanych konstrukcji stalowych oraz zwrócenie uwagi na korzystny wpływ takiego działania na środowisko naturalne.
The paper presents the manners of re-using steel structures, based on the examples of two bridge spans. It should be noted that the decision, whether a structural element will be re-used is very important as early as at the stage of disassembling the structure. The manner of dividing the structure into shipping elements, transport and storage – all this depends on the intended future of the given element and on whether it will be suitable for reusing. There are numerous factors that influence the possibility to reuse a structure. The aim of the considerations presented in this article is to specify the factors that must be taken into account when making a decision on re-using disassembled steel structures and to emphasise the beneficial environmental impact of such actions.
Źródło:
Builder; 2020, 24, 4; 124-127
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of bridge girder with composite dowel shear connection
Analiza numeryczna dźwigara mostowego z zespoleniem typu “compisite dowels”
Autorzy:
Lacki, P.
Nawrot, J.
Powiązania:
https://bibliotekanauki.pl/articles/396700.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
bridge girder
steel-concrete composite beams
composite dowels
VFT-WIB® beams
dźwigar mostowy
belki zespolone stalowo-betonowe
zespolenie composite dowels
belki VFT-WIB®
Opis:
The work presents a brief description of VFT-WIB® steel-concrete composite beams, examples of composite dowel shear connection shapes are presented. A steel-concrete bridge girder construction solution for the new shape of composite dowel shear connection was proposed. The geometric parameters of the steel section web cutting line are given. For the assumed cross-section dimensions, a numerical model of the girder was made. Numerical analysis was performed, the results of which were compared with the results of the analytical calculations. A program of actions aimed at further optimization of the model is presented.
W pracy przedstawiono krótką charakterystykę stalowo-betonowych belek zespolonych typu VFT-WIB®, zaprezentowano przykładowe kształty zespolenia typu “composite dowels”. Zaproponowano rozwiązanie konstrukcyjne stalowo-betonowego dźwigara mostowego dla nowego kształtu zespolenia typu “composite dowels”. Założono, że dźwigar będzie miał rozpiętość w osi podpór 15 m, jego przekrój będzie tworzył teownik stalowy uzyskany z rozcięcia na dwie połowy dwuteownika HEB 900 oraz płyta żelbetowa grubości 25 cm. Podano parametry geometryczne linii cięcia środnika kształtownika stalowego. Przyjęto schemat statyczny dźwigara w postaci belki swobodnie podpartej obciążonej obciążeniem równomiernie rozłożonym uwzględniającym ciężar własny konstrukcji oraz obciążenie użytkowe. Dla założonych wymiarów przekroju poprzecznego wykonano model numeryczny dźwigara przy użyciu programu ADINA wykorzystującego Metodę Elementów Skończonych. Przeprowadzono analizę numeryczną na podstawie, której określono wartości naprężeń normalnych w kształtowniku stalowym oraz w płycie betonowej a także ugięcie dźwigara. Wyniki obliczeń numerycznych porównano z wynikami przeprowadzonych obliczeń analitycznych. Wykazano zbieżność między wynikami numerycznymi i analitycznymi.
Źródło:
Civil and Environmental Engineering Reports; 2017, No. 27(4); 55-65
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie dwóch największych mostów podwieszonych zbudowanych w Europie w latach 2008-2011
Comparison of two largest cable-stayed bridges built in Europe in 2008-2011
Autorzy:
Biliszczuk, J.
Szymczyk, O.
Powiązania:
https://bibliotekanauki.pl/articles/145112.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
most podwieszony
montaż wspornikowy
nasuwanie podłużne
koszty budowy
cable-stayed bridge
cantilever erection
incremental launching
steel box girder
prestressed concrete box girder
erection costs
Opis:
W ostatnich latach w Europie zbudowano dwa mosty podwieszone o dużej rozpiętości przęseł: most Rędziński w ciągu Autostradowej Obwodnicy Wrocławia i most przez Sawę w Belgradzie. Są to obiekty o podobnej konstrukcji i skali trudności realizacyjnych. Dokonano porównania podstawowych parametrów geometrycznych tych mostów oraz czasu i kosztów ich realizacji.
In recent years in Europe two large cable-stayed bridges were built: Rędziński Bridge along Highway Ring Road of Wrocław and Sava Bridge within Inner City Semi Ring Road in Belgrade.Comparison of their geometrical parameters and description of construction technologies of both structures were presented. Costs and periods of erecting the bridges were also compared.
Źródło:
Drogownictwo; 2012, 3; 82-88
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue strength of steel plate girder railway bridges with butt joints reinforced with one-sided rhomb-shaped cover plates
Autorzy:
Wichtowski, Bernard
Konecki, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/1819228.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
most kolejowy
blachownica stalowa
połączenie doczołowe
nakładka jednostronna
złącze spawane
wytrzymałość zmęczeniowa
railway bridge
steel plate girder
butt joint
one-sided cover plate
welded joint
fatigue strength
Opis:
Due to the long period of service degradation, bridge structures require periodic technical inspections and assessment of the current load capacity. Since the 1970s, this assessment has been carried out according to the Fitness for Purpose (PUK) criterion. From 2008, the PUK criterion has been replaced with the recommendations of the European Convention on Steel Structures (ECCS). As part of these recommendations, the authors decided to explain the previously obtained unrealistic values of the fatigue class Δσϲ of the bridge butt joints covered with one-sided rhomb-shaped cover plates. The computational analysis performed with the FEM method gave excellent results which are briefly presented in the article.
Źródło:
Welding Technology Review; 2021, 93, 3; 31--40
0033-2364
2449-7959
Pojawia się w:
Welding Technology Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niezawodność stalowego mostu kratowego
The application of the form method in reliability analysis of the steel truss bridge
Autorzy:
Dudzik, A.
Obara, P.
Radon, U.
Powiązania:
https://bibliotekanauki.pl/articles/40645.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
konstrukcje stalowe
mosty kratowe
niezawodnosc
wskaznik niezawodnosci Hasofera-Linda
zmienne losowe
rozklad prawdopodobienstwa
metoda FORM
steel construction
truss bridge
reliability
Hasofer-Lind reliability index
random variable
probability distribution
Opis:
Celem pracy jest analiza probabilistyczna niezawodności stalowego mostu kratowego. Parametry projektowe konstrukcji zdefiniowano jako wielkości deterministyczne oraz jako zmienne losowe. Założono, że zmienne losowe nie są skorelowane. W analizie niezawodności rozpatrywano dwa warianty opisu zmiennych losowych. W wariancie pierwszym przyjęto rozkłady normalne, a w wariancie drugim - rozkłady adekwatne do charakteru zmiennych. Transformację parametrów normalnych na parametry innego rozkładu oszacowano metodą kolokacji w punkcie centralnym. W analizowanym przypadku kryterium awarii konstrukcji zostało określone przez dwie funkcje graniczne związane odpowiednio ze stanem granicznym nośności oraz ze stanem granicznym użytkowalności. W programie Mathematica utworzono moduł do obliczeń symbolicznych, wykorzystujący metodę elementów skończonych, do określenia funkcji granicznych dla różnych schematów statycznych. Funkcje te były punktem wyjścia w analizie probabilistycznej, do której użyto programu niezawodnościowego STAND. Stosując metodę FORM, wyznaczono wskaźnik niezawodności Hasofera-Linda. Dodatkowo w pracy przedstawiono wykresy wrażliwości wskaźnika niezawodności na zmienne losowe.
The aim of the study is a probabilistic analysis of a steel truss bridge. Structural design parameters were defined as deterministic values and random variables. The latter were not correlated. In the reliability analysis two variants of the description of random variables were considered. In the Variant I the normal distribution was used whereas in the Variant II - different types of probability distribution appropriate for the nature of the variable were proposed. The transformation of normal parameters into the parameters of another distribution was estimated by collocation method at the central point. The criterions of structural failure were expressed by a limit function related to the serviceability limit state and ultimate limit state. The module for symbolic computation using the Finite Element Method was created in the Mathematica software and used to define limit functions for different load schemes. These functions were the starting point for the probabilistic analysis for which the reliability software STAND was used. The Hasofer-Lind reliability index was estimated using the FORM method. In addition, the study presents graphs of sensitivity of the reliability index to the random variables.
Źródło:
Acta Scientiarum Polonorum. Architectura; 2015, 14, 4
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametry cieplno–wilgotnościowe narożnika ściany zewnętrznej wykonanej w technologii szkieletowej drewnianej i stalowej
Thermal and humidity parameters of external walls in wood and steel skeleton technology
Autorzy:
Major, M.
Kosiń, M.
Powiązania:
https://bibliotekanauki.pl/articles/2065511.pdf
Data publikacji:
2018
Wydawca:
Politechnika Częstochowska
Tematy:
lekkie stalowe konstrukcje szkieletowe
szkielet drewniany
rozkład temperatur
parametry cieplno-wilgotnościowe
mostek liniowy
metoda elementów skończonych
symulacja numeryczna
lightweight steel framing
wooden skeleton
temperature distribution
thermo-humidity parameters
thermal bridge
finite element method
numerical simulation
Opis:
W artykule przedstawiono analizę porównawczą mostka cieplnego naroża ściany zewnętrznej wykonanego w technologii lekkiego szkieletu stalowego i technologii szkieletu drewnianego. Dodatkowo rozważono dwa przypadki obejmujące szkieletową konstrukcję z profili cienkościennych pełnych i thermo. Na drodze symulacji komputerowej dokonano analizy cieplno–wilgotnościowej analizowanego złącza przegrody zewnętrznej. Obliczenia numeryczne wykonano w oparciu o MES przy użyciu programu ANSYS.
The paper presents a comparative analysis of the thermal bridges of the external wall made of light steel skeleton technology and wood skeleton technology. In addition, two cases have been considered including a skeletal structure made of thin and thermo-thin profiles. On the computer simulation made the thermal and humidity analysis of the analyzed of the external wall. Numerical calculations are based on FEM using ANSYS.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2018, 7, 2; 83--90
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-72 z 72

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies