Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "steam superheater" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Effect of scale deposits on the internal surfaces of the tubes on the superheater operation
Autorzy:
Trojan, M.
Taler, J.
Powiązania:
https://bibliotekanauki.pl/articles/240190.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
steam superheater
scale deposit
heat exchanger
numerical model
ogrzewacz pary
wymiennik ciepła
model numeryczny
Opis:
A mathematical model of the steam superheater exchanger with distributed parameters has been developed. Scale deposits were assumed to be present on the internal tube surfaces. It was assumed that the inner tube surfaces are covered by a thin layer of scale deposits. The finite volume method was used to solve partial differential equations describing flue gas, tube wall and steam temperature. The developed modeling technique can especially be used for modeling tube heat exchangers when detail information on the tube wall temperature distribution is needed. The numerical model of the superheater developed in the paper can be used for modeling of the superheaters with complex flow arrangement accounting scales on the internal tube surfaces. Using the model proposed the detailed steam, wall and flue gas temperature distribution over the entire superheater can be determined. The steam pressure distribution along its path flow and the total heat transfer rate can also be obtained. The calculations showed that the presence of scale on the internal surfaces of the tubes cause the steam temperature decrease and the heat flow rate transferred from the flue gas to the steam. Scale deposits on the inner surfaces of the tubes cause the tube wall temperature growth and can lead to premature wear of tubes due to overheating.
Źródło:
Archives of Thermodynamics; 2013, 34, 4; 73-91
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of layers deposited on 10CrMo9-10 steel after co-combustion of coal and biomass
Analiza osadów powstałych na stali 10CrMo9-10 w wyniku współspalania węgla i biomasy
Autorzy:
Opydo, M.
Dudek, A.
Golański, G.
Urbańczyk, P.
Powiązania:
https://bibliotekanauki.pl/articles/328620.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
energy sector
biomass
co-combustion
surface degradation
steam superheater
energetyka
biomasa
współspalanie
degradacja powierzchni
przegrzewacz pary
Opis:
Energy market is the sector of the economy which has been given a lot of attention in the last decades. This results not only from a global increase in demand for energy but also from the needs for environmental protection. It should be also noted that modernization of the energy sector is capital-intensive. Therefore, the directions of development in this sector should be driven not only by ecological reasons but also by reasonable economic calculus based on in-depth analysis of operational costs in the next decades. For this reason, an important position in the structure of energy generation is taken by co-combustion of various fuels, with particular focus on coal and biomass. Co-combustion of fuel mixtures, with each fuel having varied properties, often accelerates degradation of the structural components of a boiler.
Energetyka w ostatnich dziesięcioleciach jest jedną z tych gałęzi gospodarki, której poświęca się bardzo dużo uwagi. Wynika to nie tylko z globalnego wzrostu zapotrzebowania na energię, ale także z potrzeby ochrony środowiska naturalnego. Jednocześnie należy pamiętać, że modernizacja energetyki jest bardzo kapitałochłonna, dlatego też o kierunkach rozwoju branży muszą decydować nie tylko względy ekologiczne, ale także przemyślany rachunek ekonomiczny oparty na dogłębnej analizie kosztów eksploatacyjnych elektrowni w następnych dekadach. Z tego powodu znaczącą pozycję w strukturze produkcji energii zajmuje współspalanie różnych paliw, głównie węgla i biomasy. Spalanie mieszaniny paliw, z których każde odznacza się zróżnicowanymi właściwościami, często skutkuje przyspieszoną degradacją elementów konstrukcyjnych kotła.
Źródło:
Diagnostyka; 2015, 16, 4; 31-36
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of platen superheaters in a circulating fluidized bed boiler at different loads
Modelowanie grodziowych przegrzewaczy pary dla różnych obciążeń w kotle z cyrkulacyjnym złożem fluidalnym
Autorzy:
Madejski, P.
Taler, D.
Korzeń, A.
Powiązania:
https://bibliotekanauki.pl/articles/172817.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wymiennik ciepła
przegrzewacz pary
cyrkulacyjne złoże fluidalne
rozkład temperatury pary
heat exchanger
steam superheater
circulating fluidized bed
temperature distribution of steam
Opis:
Przegrzewacz pary drugiego stopnia jest to przegrzewacz grodziowy wykonany z rur „podwójną omega”. Przegrzewacz jako wymiennik ciepła, zbudowany jest z trzech biegów. Każdy bieg jest wykonany z innego gatunku stali niskostopowej. W artykule przedstawiono obliczenia rozkładu temperatur pary, jak również ścianki rury grodziowego przegrzewacza, dla rożnych obciążeń kotła z cyrkulacyjnym złożem fluidalnym (CFB).
A second stage steam superheater is a platen superheater made from so-called ‘double omega’ tubes. The superheater is a three-pass tube heat exchanger. Each pass is made from different low-alloy steel. In the paper, the temperature distributions of the steam and tube wall in the platen superheater were computed at different partial loads of a circulating fluidized bed (CFB) boiler.
Źródło:
Archiwum Energetyki; 2012, 42, 2; 85-92
0066-684X
Pojawia się w:
Archiwum Energetyki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer modeling of a convective steam superheater
Autorzy:
Trojan, M.
Powiązania:
https://bibliotekanauki.pl/articles/240867.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
superheater
steam boiler
CFD modeling
ash fouling
przegrzewacz
kocioł parowy
modelowanie CFD
zanieczyszczenia popiołowe
Opis:
Superheater is for generating superheated steam from the saturated steam from the evaporator outlet. In the case of pulverized coal fired boiler, a relatively small amount of ash causes problems with ash fouling on the heating surfaces, including the superheaters. In the convection pass of the boiler, the flue gas temperature is lower and ash deposits can be loose or sintered. Ash fouling not only reduces heat transfer from the flue gas to the steam, but also is the cause of a higher pressure drop on the flue gas flow path. In the case the pressure drop is greater than the power consumed by the fan increases. If the superheater surfaces are covered with ash than the steam temperature at the outlet of the superheater stages falls, and the flow rates of the water injected into attemperator should be reduced. There is also an increase in flue gas temperature after the different stages of the superheater. Consequently, this leads to a reduction in boiler efficiency. The paper presents the results of computational fluid dynamics simulations of the first stage superheater of both the boiler OP-210M using the commercial software. The temperature distributions of the steam and flue gas along the way they flow together with temperature of the tube walls and temperature of the ash deposits will be determined. The calculated steam temperature is compared with measurement results. Knowledge of these temperatures is of great practical importance because it allows to choose the grade of steel for a given superheater stage. Using the developed model of the superheater to determine its degree of ash fouling in the on-line mode one can control the activation frequency of steam sootblowers.
Źródło:
Archives of Thermodynamics; 2015, 36, 1; 125-137
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie zjawiska pełzania oraz symulacja pracy wybranych elementów przegrzewacza pary części ciśnieniowej kotła o nadkrytycznych parametrach pracy
Creep effect modelling and operation simulation for selected steam superheater elements in pressure part of boiler with supercritical working parameters
Autorzy:
Dobrzański, J.
Duda, P.
Mirecki, L.
Powiązania:
https://bibliotekanauki.pl/articles/182205.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Metalurgii Żelaza im. Stanisława Staszica
Tematy:
stal
energetyka
modelowanie
pełzanie
analiza numeryczna
model matematyczny
odkształcenia
kolektor wylotowy
wężownica
przegrzewacz
para
steel
power industry
creep
modeling
numerical analysis
mathematical models
creep strain
discharge collector
steam
superheater coil
Opis:
Przedstawiono wybrane wyniki badań uzyskane w projekcie rozwojowym pt. „Ocena zachowania się i prognoza długotrwałej pracy stali nowej generacji na elementy kotłów eksploatowanych powyżej temperatury granicznej” [1], w zakresie zbudowania modeli zjawiska pełzania, które to modele wraz z zaproponowaną analizą numeryczną posłużyły do opracowania sposobu wyznaczania trwałości eksploatacyjnej elementów o zróżnicowanej geometrii do pracy w części ciśnieniowej kotłów o parametrach nadkrytycznych (ciśnienie do 28,5 MPa; temperatura do 620oC) wykonanych z wybranych stali, a w szczególności: wysokochromowych stali martenzytycznych o zawartości 9 i 12% Cr w gatunkach X10CrMoVNb9-1 (P91), X12CrCoWVNb12-2-2 (VM12SHC) oraz austenitycznej stali chromowo-niklowej w gatunku X10CrNiCuNb18-9-3 (Super 304H), co jest drugą częścią opracowania. W pierwszej części przedstawiono sporządzone charakterystyki materiałowe badanych stali, omówiono zaproponowaną metodologię oceny stanu materiału i jego stopnia wyczerpania (zmiany obrazu mikrostruktury, zmiany składu fazowego wydzieleń, model ewolucji mikrostruktury, klasyfikacja mikrostruktury) oraz narzędzia do jego oceny [2]. W omawianej części opracowania zaprezentowano zbudowane dla badanych stali modele zjawiska pełzania: – Garofalo (Soderberga) opisujące I i II etap pełzania przy stałym naprężeniu oraz w stałej temperaturze, – własne modele opisujące odkształcenie pełzania dla I, II i III etapu pełzania przy stałym naprężeniu i w stałej temperaturze, – modele opisujące zależności czasu do zniszczenia od naprężenia dla wybranych stali, – modele opisujące prędkości pełzania w stanie ustalonym od wartości naprężenia dla wybranych stali. Na ich podstawie zaproponowano matematyczne modele odkształcenia pełzania w funkcji czasu i naprężenia dla wszystkich trzech analizowanych stali. Przedstawiono analizę wytężenia wybranych elementów konstrukcyjnych o zróżnicowanej geometrii: kolektora wylotowego wykonanego ze stali P91, przegrzewacza SH3 wykonanego ze stali Super 304H i przegrzewacza SH3 wykonanego ze stali VM12SHC, w oparciu o uprzednio wykonaną przez wytwórcę kotłów dokumentację projektową. Wykonana analiza przy wykorzystaniu metody elementów skończonych pozwoliła na wskazanie miejsc koncentracji naprężeń w tych elementach konstrukcyjnych. Przeprowadzona analiza numeryczna pozwoliła na określenie rozkładu odkształceń i naprężeń w nowych elementach konstrukcyjnych oraz takich, w których jest już widoczny wpływ postępującego procesu pełzania, a ponadto na symulację pracy wybranych elementów krytycznych w czasie znacznie przekraczającym czas przeprowadzonych prób pełzania. Modelowano pracę elementów urządzeń do 200 000 godzin pracy, podczas gdy najdłuższe próby pełzania zrealizowane w ramach projektu trwały około 25 000 godzin.
This paper presents selected investigation results obtained in the development project “The assessment of behaviour and forecast about long-term operation of new-generation steel for components of boilers operated above limit temperature” with regard to building the creep effect models which, along with proposed numerical analysis, were used for development of the method for determination of life time of elements with different geometry intended for operation in the pressure part of boilers with supercritical parameters (pressure up to 28.5 MPa; temperature up to 620oC) made of selected steels, in particular: high-chromium martensitic steels containing 9 and 12% of Cr – grades X10CrMoVNb9-1 (P91) and X12CrCoWVNb12-2-2 (VM12SHC), and austenitic chromium-nickel steel – grade X10CrNiCuNb18-9-3 (Super 304H), which is the second part of the study. In the first part, the material characteristics developed for selected steels were presented, the proposed methodology for the assessment of material condition and exhaustion extent (changes in the image of microstructure, changes in phase composition of precipitates, microstructure evolution model, microstructure classification) and the assessment tools were discussed [1]. In this part of the study, the following creep effect models built for the examined steels were presented: – Garofalo (Soderberg) model describing stage I and II of the creep at constant stress and constant temperature, – own models describing creep strain for stage I, II and III of the creep at constant stress and constant temperature, – models describing the relationships between time to destruction and strain for selected steels, – models describing steady-state creep rates depending on stress values for selected steels. On the basis of these, the mathematical models of creep strain as a function of time and stress for all the three analysed steels were proposed. The effort analysis for selected structural components with different geometry: discharge collector made of P91 steel, SH3 superheater made of Super 304H steel and SH3 superheater made of VM12SHC steel, was presented based on the design documentation prepared previously by the boiler manufacturer. The analysis made using the finite-element method allowed the points of stress concentration in these structural components to be indicated. The numerical analysis allowed the determination of strain and stress distribution in new structural components as well as those where the effect of progressing creep process was already visible, and moreover the operation simulation for selected critical elements within the time significantly exceeding that of completed creep tests. The operation of the equipment elements was modelled for up to 200,000 hours, while the longest creep tests performed as a part of the project were approx. 25,000 hours.
Źródło:
Prace Instytutu Metalurgii Żelaza; 2014, T. 66, nr 3, 3; 29-41
0137-9941
Pojawia się w:
Prace Instytutu Metalurgii Żelaza
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies