Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "squeezing" wg kryterium: Temat


Wyświetlanie 1-12 z 12
Tytuł:
Enhancement of the Hong-Mandel higher-order squeezing and amplitude odd-power squeezing in even coherent state by its superposition with vacuum state
Autorzy:
Kumar, P.
Kumar, R.
Prakash, H.
Powiązania:
https://bibliotekanauki.pl/articles/1054884.pdf
Data publikacji:
2017-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
coherent state
non-classical features of optical field
the Hong-Mandel higher-order squeezing
amplitude n th-power squeezing
phase shifting operator
Opis:
We study the Hong-Mandel 2n th-order squeezing of the Hermitian operator, X_θ ≡ X₁cosθ + X₂sinθ and amplitude n th-power squeezing of the Hermitian operator, Y_θ^{(n)} ≡ Y₁^{(n)}cosθ + Y₂^{(n)}sinθ in superposed state |ψ⟩ = K[|α,+⟩ + re^{iφ}|0⟩], of vacuum state and even coherent state defined by |α,+⟩ = K_+[|α⟩+|-α⟩]. Here operators X_{1,2} are defined by X₁ + iX₂ = a, operators Y_{1,2}^{(n)} are defined by Y₁^{(n)} + iY₂^{(n)} = aⁿ, a is the annihilation operator, α, θ, r and φ are arbitrary and the only restriction on these is the normalization condition of the superposed state. We show that the Hong-Mandel 2n th-order squeezing and amplitude odd-power squeezing exhibited by even coherent state enhance in its superposition with vacuum state. Variations of these higher-orders squeezing with different parameters near its maxima have also been discussed.
Źródło:
Acta Physica Polonica A; 2017, 131, 6; 1485-1490
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ kształtu elementu obciążającego na obrazu izochrom w dwuwarstwowym modelu przekroju poprzecznego korzenia marchwi
Influence of the shape of load element on picture of isochroms in two-layer model of carrot root cross-section
Autorzy:
Stopa, R.
Romański, L.
Powiązania:
https://bibliotekanauki.pl/articles/290822.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
elastooptyka
korzeń
marchew
ściskanie
izochromy
elastooptics
carrot
root
squeezing
isochroms
Opis:
W pracy przedstawiono wyniki badań elastooptycznych dwuwarstwowego modelu przekroju poprzecznego korzenia marchwi obciążonego siłą promieniową. Wymuszenie obciążenia przeprowadzono przy użyciu maszyny wytrzymałościowej Instron, 5566, a do pomiarów wykorzystano liniowy polaryskop elastooptyczny. Wyznaczono obrazy izochrom dla różnych kształtów elementu obciążającego. Model wykonano z elastomeru poliuretanowego przy zachowaniu praw podobieństwa modelowego.
The study presents results of elastooptic study of a two-layer model of carrot root cross-section burdened with radial force. Load was forced using mechanical testing machine Instron 5566, and linear elastooptic polariscope was used for measurements. Pictures of isochroms were determined for various shapes of the load element. The model was done from polyurethane elastomer with preservation of model probability.
Źródło:
Inżynieria Rolnicza; 2006, R. 10, nr 7(82), 7(82); 399-406
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Slip effects on squeezing flow of nanofluid between two parallel disks
Autorzy:
Das, K.
Jana, S.
Acharya, N.
Powiązania:
https://bibliotekanauki.pl/articles/264490.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
pole magnetyczne
tarcie
poślizg
nanofluid
slip effect
squeezing flow
magnetic field
Opis:
In this study, the influence of temperature and wall slip conditions on the unsteady flow of a viscous, incompressible and electrically conducting nanofluid squeezed between two parallel disks in the presence of an applied magnetic field is investigated numerically. Using the similarity transformation, the governing coupled partial differential equations are transformed into similarity non-linear ordinary differential equations which are solved numerically using the Nachtsheim and Swigert shooting iteration technique together with the sixth order Runge-Kutta integration scheme. The effects of various emerging parameters on the flow characteristics are determined and discussed in detail. To check the reliability of the method, the numerical results for the skin friction coefficient and Nusselt number in the absence of slip conditions are compared with the results reported by the predecessors and an excellent agreement is observed between the two sets of results.
Źródło:
International Journal of Applied Mechanics and Engineering; 2016, 21, 1; 5-20
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Issledovanie konstrukcijj rabochikh organov maslootzhimnykh pressov
Research structures of working bodies oil press
Autorzy:
Streltsov, V.
Powiązania:
https://bibliotekanauki.pl/articles/76286.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
oil pressing
necessary process
pressure
squeezing
vegetable oil
effectiveness
efficiency
productivity
quality
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 2
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technological Capabilities of Well Cementing
Autorzy:
Ivanova, Tatiana N.
Zasadzień, Michał
Powiązania:
https://bibliotekanauki.pl/articles/2064552.pdf
Data publikacji:
2021
Wydawca:
STE GROUP
Tematy:
cementing of casing string
isolation of water-bearing horizon
cement slurry injection
squeezing
Opis:
Cementing of casing string is a final operation before the next stage of well construction; it provides maximum operational life of the well. Cementing of casing string is carried out with the use of technology, based on squeezing of the whole volume of drilling mud by special grouting composition. The main purposes of cementing include isolation of water-bearing horizon, strengthening of borehole walls in unconsolidated and unstable rocks. Well cementing process is divided into five subsequent operations. Firstly, grouting mixture is prepared in concrete mixers (cementing units) with necessary water-to-cement ratio and additives. Secondly, prepared grouting solution is injected in a well. Thirdly, the solution is squeezed into the space between the casing pipes and wellbore walls. Then it is necessary to wait until the cement sheath is hardened. And at last, quality control is carried out. For convenient transportation, the equipment for well cementing is installed on the truck chassis (KAMAZ, URAL and etc.). All components are poured in concrete mixer, then the water is added and everything is being mixed until formation of uniform mass, which is later pumped in a well. Oil and Gas Industry Safety Regulations say that «calculated endurance of casing string cementing should not exceed 75% of time of cement thickening, established by laboratory tests». Therefore, it is necessary to carry out all operations of injection of fluids into the well as soon as possible without any incompliances of the cementing technology. With cementing material used and its water-to-cement ratio of 0.5, the average time of cement thickening is 120 minutes, according to laboratory tests. Therefore, a set of operations of injection of fluids should not exceed 90 minutes.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2021, 4, 1; 465--478
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatic semifluid mass dispenser
Automatyczny dozownik masy półpłynnej
Autorzy:
Samborski, Tomasz
Zbrowski, Andrzej
Kozioł, Stanisław
Mrozek, Mirosław
Powiązania:
https://bibliotekanauki.pl/articles/31232958.pdf
Data publikacji:
2023
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
tube squeezing
semifluid substance dispensing
automatic dispenser
wyciskanie tubki
dozowanie substancji półpłynnej
dozownik automatyczny
Opis:
The article presents an innovative method for hair dye dispensing and a prototype device enabling automatic dispensing of hair dyes and other semifluid substances. The dispenser makes it possible to programme colour compositions and to precisely dispense the programmed amounts of dyes from three different tubes to combine colours and achieve the desired, known or new, colour and tonal value, as requested by the client. With the dispenser’s software, the hairdresser can create interlinked databases of applications and mixtures and ensure rational management of the substances used. The modern design, compact structure, and automated operation decide on the innovativeness of the dispenser. The article discusses the genesis of the project, the functional and technical assumptions of the innovative device, as well as the design and development of the prototype and performance of functional tests, paying particular attention to the presentation and description of the following: (1) the original structural solutions; (2) the operation of functional modules that are responsible for positioning and identifying dye tubes, dispensing dyes in precisely defined amounts, monitoring the composition of the colour formula, and ensuring optimum dye use; and (3) the user interface. The structure of the device was developed by joining metal structural elements produced with the use of technologies typical for machine construction with commercial components (drives and controllers) and components produced with the use of additive manufacturing technologies responsible for the complete integration and design of the device. The original structural solution of the device is protected by intellectual property rights under patent applications.
W artykule przedstawiono nowatorską metodę dozowania farb do włosów oraz prototypowe urządzenie umożliwiające automatyczne dozowanie farb do włosów i innych półpłynnych substancji. Dozownik umożliwia programowanie kompozycji kolorystycznych oraz precyzyjne dozowanie zaprogramowanych ilości barwników z trzech różnych tub w celu łączenia kolorów i uzyskania pożądanej, znanej lub nowej wartości kolorystycznej i tonacyjnej, zgodnie z życzeniem klienta. Dzięki oprogramowaniu dozownika fryzjer może tworzyć powiązane ze sobą bazy danych aplikacji i mieszanek oraz zapewnić racjonalne zarządzanie stosowanymi substancjami. Nowoczesny design, zwarta konstrukcja oraz zautomatyzowana obsługa decydują o innowacyjności dozownika. W artykule omówiono genezę projektu, założenia funkcjonalne i techniczne innowacyjnego urządzenia, a także zaprojektowanie i wykonanie prototypu oraz wykonanie badań funkcjonalnych, zwracając szczególną uwagę na przedstawienie i opis: (1) oryginalne rozwiązania konstrukcyjne; (2) działanie modułów funkcjonalnych odpowiedzialnych za pozycjonowanie i identyfikację tub z barwnikiem, dozowanie barwników w ściśle określonych ilościach, monitorowanie składu receptury kolorystycznej oraz zapewnienie optymalnego wykorzystania barwnika; oraz (3) interfejs użytkownika. Konstrukcja urządzenia została opracowana poprzez połączenie metalowych elementów konstrukcyjnych wykonanych w technologiach typowych dla budowy maszyn z komponentami komercyjnymi (napędy i sterowniki) oraz komponentami wytwarzanymi z wykorzystaniem technologii wytwarzania przyrostowego odpowiedzialnych za pełną integrację i zaprojektowanie urządzenia . Oryginalne rozwiązanie konstrukcyjne urządzenia jest chronione prawami własności intelektualnej na podstawie zgłoszeń patentowych.
Źródło:
Technologia i Automatyzacja Montażu; 2023, 1; 37-43
2450-8217
Pojawia się w:
Technologia i Automatyzacja Montażu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczna analiza deformacji nitu grzybkowego i otworu nitowego w procesie zakuwania
Numerical investigation of mushroom rivet and rivet hole deformations in a squeezing process
Autorzy:
Szymczyk, E.
Powiązania:
https://bibliotekanauki.pl/articles/211224.pdf
Data publikacji:
2010
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
połączenia nitowe
spęczenie nitu
MES (metoda elementów skończonych)
kontakt
riveted joint
rivet squeezing
FEM
contact
Opis:
W trakcie nitowania wokół otworu nitowego dochodzi do odkształceń plastycznych, które korzystnie wpływają na trwałość zmęczeniową połączenia. W pracy przedstawiono analizę przemieszczeń nitu oraz otworu nitowego w zależności od wysokości zakuwki (siły zakucia). Symulację procesu zakuwania przeprowadzono dla nitu grzybkowego o średnicy trzpienia 3,5 mm łączącego blachy o grubości 1,2 mm każda. Wykonano trójwymiarowy model otoczenia pojedynczego nitu o boku 10,5 mm. Wielkość łba fabrycznego przyjęto na podstawie normy [OST 1 34040-79]. Nit oraz blachy opisano ośmiowęzłowymi, izoparametrycznymi elementami 3D. Obliczenia w zakresie dużych przemieszczeń i odkształceń wykonano dla sprężysto-plastycznego modelu materiału. Podtrzymkę oraz zagłownik opisano jako elementy sztywne. Pomiędzy współpracującymi elementami złącza zdefiniowano kontakt dwustronny z tarciem. Obliczenia numeryczne wykonano dla czterech wariantów zakucia, opisanych przez średnicę zakuwki zmieniającą się od minimalnej do maksymalnej wartości dopuszczalnej w instrukcji nitowania. Maksymalne przemieszczenia otworu nitowego (odpowiadające maksymalnemu spęczeniu nitu) zaobserwowano od strony zakuwki. Średnie przemieszczenie otworu w blasze od strony zakuwki jest prawie dwa razy większe od przemieszczenia otworu blachy od strony łba fabrycznego. Ograniczenie średnicy zakuwki w trakcie nitowania powoduje większe spęczenie nitu w otworze oraz bardziej równomierny rozkład przemieszczeń.
The plastic strain field remains in the joint around the rivet hole as a result of the riveting process. Residual strain field is beneficial because it has a significant influence on fatigue life of the joint. The paper deals with an analysis of the squeezing force influence on the rivet and rivet hole deformations. The simulation of the riveting process is carried out for a mushroom rivet (shank diameter 3.5 mm) joining two aluminium sheets (thickness 1.2 mm). The three-dimensional numerical model of the sheet square part 10.5 mm-wide surrounding a single rivet is considered (Fig. 3). Dimensions of the mushroom rivet are taken according to Russian standard [OST 1 34040-79]. The models of the rivet and sheets consist of eight-noded, isoparametric, three-dimensional brick elements. The classical updated Lagrange procedure for elastic-plastic materials and large strain plasticity option is used due to large geometrical and material non-linearities. The rounded and the flat rivet tools are described as rigid surfaces. The contact with Coulomb friction model is defined between the mating parts of the joint. Four cases of squeezing conditions (driven head dimensions) are taken into account. The driven rivet head diameter changes from its minimum to maximum value according to a manufacturing instruction. Large displacements of the rivet hole are observed in the sheet by the side of the driven rivet head. The average displacements value of the rivet hole in the sheet under the driven rivet head is twice as much greater than in the later one (the sheet by the side of the manufactured head). Squeezing the rivet with restriction of the driven head diameter causes a better rivet hole filling capability and a more uniform displacement distribution.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2010, 59, 4; 351-362
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ściskanie obrobionych termicznie gorących nasion łubinu
A compression of thermally processed hot lupine seeds
Autorzy:
Andrejko, D.
Oszczak, Z.
Powiązania:
https://bibliotekanauki.pl/articles/287804.pdf
Data publikacji:
2007
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
łubin żółty
nasiona
obróbka termiczna
zgniatanie
odwzorowanie matematyczne
lupine
seeds
squeezing process
heat treatment
mathematical representation
Opis:
W pracy przedstawiono metodę doboru funkcji odwzorowania matematycznego procesu ściskania obrobionych termicznie gorących próbek nasion łubinu przeznaczonych do śrutowania oraz płatkowania. Metoda została oparta na modelowaniu matematycznym funkcji jednostkowych sił zgniotu oraz jednostkowej energii w zależności od temperatury w komorze suszarni i czasu podgrzewania surowca. Metodę zilustrowano przykładem przygotowania i testowania próbek nasion łubinu poddanych procesowi podgrzewania w suszarce uniwersalnej SUP-4 oraz zgniatania gorących nasion na maszynie do badań wytrzymałościowych Instron 4302.
The paper presents a procedure of selecting a mathematical representation of the compression process of thermally processed hot samples of lupine seeds intended for grinding and flaking. The method was based on mathematical modeling of unit step functions of squeeze forces and unit energy depending on the temperature in the drying chamber and raw material heating time. The method was illustrated by example of preparation and testing of lupine seed samples put to heating In the universal drier SUP-4 and squeezing of hot seeds on the testing machine Instron 4302.
Źródło:
Inżynieria Rolnicza; 2007, R. 11, nr 5 (93), 5 (93); 7-12
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Entropy generation and squeezing flow past a Riga plate with Cattaneo-Christov heat flux
Autorzy:
Atlas, M.
Hussain, S.
Sagheer, M.
Powiązania:
https://bibliotekanauki.pl/articles/202419.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanowłókna
konwekcyjne warunki brzegowe
strumień ciepła Cattaneo-Christova
generowanie entropii
squeezing flow
Riga plate
nanofluids
convective boundary conditions
Cattaneo-Christov heat flux
entropy generation
Opis:
In this article, we investigate the convective heat transfer of the two-dimensional unsteady squeezing flow past a Riga plate. To examine the heat transfer, Cattaneo-Christov heat flux model is used. Influence of entropy generation on heat transfer has been investigated numerically. With the help of suitable similarity transformation, the governing partial differential equations (PDEs) are converted into ordinary differential equations (ODEs). The obtained system of non-linear ordinary differential equations subject to the convective boundary conditions is solved by the shooting method using the computational software MATLAB. To strengthen the reliability of the results obtained by the shooting method, the MATLAB built-in function bvp4c has been used. The graphs show the effect of different physical parameters for velocity, temperature, concentration and tables are presented to observe the behaviour of skin friction and sherwood number under the influence of certain physical parameters. It is observed that for increasing values of thermal relaxation parameter, the temperature profile increases and an opposite behaviour is shown for the concentration profile. Moreover, with an increase in the Brinkman number, the entropy generation increases.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 3; 291-300
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Advances in Technology of Soluble Cores for Die Castings
Autorzy:
Jelínek, P.
Adámková, E.
Mikšovský, F.
Beňo, J.
Powiązania:
https://bibliotekanauki.pl/articles/380425.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
salt cores
manufacture
squeezing
shooting
cooking salt
bonding of cores
salinity
cleaning water
electric conductance
rdzeń solny
wytwarzanie
wyciskanie
sól kuchenna
oczyszczanie wody
przewodnictwo elektryczne
Opis:
A number of technologies is developed that substitute simple metal cores in the high-pressure casting technology. Soluble cores, namely on the salt basis, represent the highest prospect. The contribution gives the results of the production of salt cores by high-pressure squeezing and shooting with using a binder. Special attention is paid to the shape of NaCl salt crystals with additives and the influence on strength properties of cores. A technology of bonding the salt cores is developing. Salinity of circulating water is studied and it is checked with the aid of electrical conductance.
Źródło:
Archives of Foundry Engineering; 2015, 15, 2; 29-34
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lost Cores for High-Pressure Die Casting
Autorzy:
Jelinek, P.
Adámková, E.
Powiązania:
https://bibliotekanauki.pl/articles/379956.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
product development
salt cores
high-pressure die casting
squeezing-injection
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
rozwój produktów
odlewnictwo wysokociśnieniowe
rdzeń
Opis:
Development of salt cores prepared by high-pressure squeezing and shooting with inorganic binders has shown a high potential of the given technology even for high-pressure casting of castings. Strength, surface quality of achieved castings, and solubility in water become a decisive criterion. The shape and quality of grain surface particularly of NaCl – cooking salts that can be well applied without anticaking additives has shown to be an important criterion. Thus the salt cores technology can cover increasingly growing demands for casting complexity especially for the automobile industry.
Źródło:
Archives of Foundry Engineering; 2014, 14, 2; 101-104
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of the load and joint cartilage elasticity modules on synovial fluid viscosity
Wpływ obciążenia i modułów sprężystości chrząstki stawowej na lepkość cieczy synowialnej
Autorzy:
Wierzcholski, K.
Sójka, M.
Powiązania:
https://bibliotekanauki.pl/articles/188341.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
joint cartilage
superficial layer
hypo-hyper-elasticity modules
non-Newtonian synovial fluid
viscosity changes
hydrodynamic lubrication
rotation
squeezing
EHD-deductions
chrząstka stawowa
warstwa wierzchnia
moduły nad sprężystości
zmiany lepkości nienewtonowskiej cieczy synowialnej
smarownie
ruch obrotowy
wyciskanie
EHD- implikacje
Opis:
During classical journal bearing lubrication the lubricant viscosity is independent of physical properties of cooperating bodies, which is well known by virtue of Hersey-Stribeck (H-S) curve presenting friction coefficient vs. Hersey number = viscosity×velocity/pressure. The result obtained by the H-S is valid for two cooperating bodies with homogeneous, isotropic properties, and for Newtonian oils omitting the elastohydrodynamic effects. In the presented paper, we take into account the two cooperating human joint cartilage surfaces, which, after new AFM measurements, have non-homogeneous hypo- or hyper-elastic properties, and the synovial fluid Has non-Newtonian features. Moreover, the cartilage surface during human limb motion and during the squeezing and boosted squeezing effects gains important small deformations. From the above mentioned description, it follows that the H-S result cannot be acceptable in human joint lubrication [L. 1–6]. During human joint hydrodynamic lubrication, we observe the influence of the material coefficients of the hypo- and hyper-elastic cartilage tissue on the apparent viscosity of non-Newtonian synovial fluid occupying the thin joint gap limited by the two cartilage superficial layers. This problem has not been considered in scientific papers describing the hydrodynamic lubrication of the human joint. This problem attains significant meaning because, after numerous AFM laboratory measurements confirmed by the literature achievements, it follows that the joint cartilage tissue with a thin polar membrane made of two lipid molecules has no isotropic but anisotropic properties in general. These membranes are flat sheets that form a continuous barrier around the cartilage cells. Non homogeneous, anisotropic biological bodies as distinct from classical isotropic materials have the various values of elasticity, hypoelasticity, or hyper-elasticity modules on individual places and directions. These places, loaded by the same forces, tend to various displacements and strains. In consequence, mutually connected physical implications caused by virtue of synovial fluid flow velocity and shear rates changes, indicate to us the conclusion that the dynamic viscosity of synovial fluid gains value variations caused by the cartilage’s physical properties during human joint lubrication.
Model zmiany współczynnika tarcia w zależności od liczby Herseya, czyli stosunku iloczynu lepkości i prędkości do ciśnienia, świadczy o niezależności lepkości czynnika smarującego od własności fizycznych smarowanych powierzchni w klasycznych łożyskach ślizgowych. Jednak ważny rezultat Herseya-Stribecka H-S obowiązuje przede wszystkim dla dwóch jednorodnych, izotropowych współpracujących ciał oraz cieczy smarującej o newtonowskich właściwościach przy pominięciu elasto-hydro-dynamicznych efektów. Niniejsza praca dotyczy smarowania dwóch współpracujących powierzchni pokrytych chrząstką stawową, która według najnowszych pomiarów przeprowadzonych za pomocą mikroskopu sił atomowych AFM ma zmienne, niejednorodne, anizotropowe, a w szczególności nadsprężyste właściwości uzależnione od położenia i kierunku. Ciecz synowialna jest nienewtonowska. Ponadto ruch kończyn człowieka, siadanie, klękanie, skoki powodują wzmożone wyciskanie (boosted squeezing) cieczy synowialnej w warstewce chrząstki stawowej skutkujące chociaż małymi, ale jednak bardzo istotnymi niepomijalnymi deformacjami. Stąd wynika hipoteza o braku akceptacji rezultatów H-S w zakresie smarowania stawów. Podczas smarowania stawów człowieka prawie zawsze występuje problem wpływu modułów nadsprężystych chrząstki stawowej na lepkość pozorną nienewtonowskiej cieczy synowialnej zalegającej w szczelinie stawu. Według informacji autora rozpatrywanie tego ważnego problemu nie jest uwzględniane we współczesnej literaturze naukowej z zakresu hydrodynamiki stawów. Problem ten nabiera jednak szczególnie dużego znaczenia w świetle najnowszych własnych badań chrząstek stawowych w mikro- i nanoskali potwierdzonych również w literaturze naukowej. Chrząstka stawowa pokryta dwuwarstwą fosfolipidów o różnym stopniu upakowania ma właściwości anizotropowe. Biologicznie niejednorodne ciała anizotropowe w odróżnieniu od klasycznych jednorodnych izotropowych materiałów mają różne wartości współczynników sprężystości i nadsprężystości w poszczególnych miejscach oraz kierunkach. Wskazane miejsca obciążone jednakowymi siłami odznaczają się wtedy różnymi przemieszczeniami i odkształceniami. W konsekwencji opisanych w niniejszej pracy wzajemnych implikacji związków fizycznych wywołanych zmianami prędkości przepływu oraz deformacji dochodzi się do wniosku, że lepkość dynamiczna cieczy synowialnej ulega zmianom w trakcie smarowania stawów w zależności od fizycznych właściwości chrząstki stawowej.
Źródło:
Tribologia; 2016, 266, 2; 159-171
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies